Valves and JAK, Adjust

IMPACT 3.0 Saturday, 22 October 2016 Chassis ID Path 214/Repair/FE, D7F340, EBR-CBJ3/Valves and JAK, adjust Model Identity FE 129405484 Publish date Operation No. Saturday, 12 June 2010 21421-3 21421-3 Valves and JAK, adjust Note: As the pictures in the service literature are used for more than one variant, some details can differ in respect of the vehicle you are working with. The essential information in the illustrations is, however, always correct. Special tools: 88800014, 885812 1 A = 88800014 Remove the plug at the flywheel. Fit cranking tool (A). Special tools: 88800014, 885812 2 COPYRIGHT © Copyright Volvo Parts Corporation The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled. 1/6 Note: No. 1. 22 October 2016 Crank the flywheel until the piston in No. 1 cylinder is closest to the flywheel. The reader is advised that printed copies are uncontrolled. Special tools: 88800014 3 COPYRIGHT © Copyright Volvo Parts Corporation The information contained herein is current at the time of its original distribution.1 cylinder is at TDC and its exhaust and inlet valves overlap on cylinder No.IMPACT 3.0 Saturday. but is subject to change. 2/6 . 5 and 6 and the exhaust valves for cylinders 2. Screw back the adjuster screw. Put a protractor on the valve adjuster screw.IMPACT 3. 4 and 6.0 Saturday. Undo the locknut on the adjuster screw. 5 COPYRIGHT © Copyright Volvo Parts Corporation The information contained herein is current at the time of its original distribution. The reader is advised that printed copies are uncontrolled. Screw down the adjuster screw to reduce the play to zero. Hold the adjusting screw still to prevent rotation while torque tightening. 4 and 6 according to step 5. Check the number of degrees in Specifications . 22 October 2016 A = 885812 Adjust the inlet valves for cylinders 3. but is subject to change. 3/6 . Torque tighten the locknut according to the specifications with an open socket. Zero the protractor. Special tools: 885812 4 Adjust the clearance for the JAK piston on cylinders 2. Screw down the adjustment screw until the clearance is zero. 4/6 . Special tools: 88800014 7 COPYRIGHT © Copyright Volvo Parts Corporation The information contained herein is current at the time of its original distribution. The reader is advised that printed copies are uncontrolled. 22 October 2016 Loosen the lock nut on the piston adjustment screw. but is subject to change.0 Saturday. 6 Crank the flywheel until the exhaust and inlet valves overlap on cylinder 6. Screw back the Allen screw according according to Specifications .IMPACT 3. 9 COPYRIGHT © Copyright Volvo Parts Corporation The information contained herein is current at the time of its original distribution. 2 and 4 and the exhaust valves for cylinders 1. but is subject to change. Special tools: 885812 8 Adjust the clearance for the JAK piston on cylinders 1. 5/6 .0 Saturday. 3 and 5 according to step 3. The reader is advised that printed copies are uncontrolled.IMPACT 3. 1 cylinder is closest to the flywheel. 3 and 5 according to step 9. Note: No. 22 October 2016 A = 885812 Adjust the inlet valves for cylinders 1. 10 Remove cranking tool 88800014 and refit the plug.IMPACT 3. 6/6 . COPYRIGHT © Copyright Volvo Parts Corporation The information contained herein is current at the time of its original distribution.0 Saturday. 22 October 2016 Loosen the lock nut on the piston adjustment screw. The reader is advised that printed copies are uncontrolled. Screw down the adjustment screw until the clearance is zero. Screw back the Allen screw according to Specifications . but is subject to change.