t315xw02 v9 LCD Panel

www.DataSheet4U.com Product Description: T315XW02 TFT-LCD PANEL AUO Model Name: T315XW02 V9 Customer Part No/Project Name: Customer Signature Date AUO Approved By: PL Chen Reviewed By: Hong Jye Hong Prepared By: Jacky Su Date ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. Ver 0 1/28 www.DataSheet4U.com Document Version : 0 Date : 2006/08/30 Product Specifications 31.5” WXGA Color TFT-LCD Module Model Name: T315XW02 V9 (*) Preliminary Specifications ( ) Final Specifications ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. ver 0 2/28 www.DataSheet4U.com Contents No COVER CONTENTS RECORD OF REVISIONS 1 2 3 GENERAL DESCRIPTION ABSOLUTE MAXIMUM RATINGS ELECTRICAL SPECIFICATIONS 3-1 3-2 3-3 3-4 3-5 3-6 4 5 6 7 7-1 7-2 8 9 ELECTRICAL CHARACTREISTICS INTERFACE CONNECTIONS SIGNAL TIMING SPECIFICATIONS SIGNAL TIMING WAVEFORMS COLOR INPUT DATA REFERNECE POWER SEQUENCE OPTICAL SPECIFICATIONS MECHANICAL CHARACTERISTICS RELIABLITY INTERNATIONAL STANDARDS SAFETY EMC PACKING PRECAUTIONS ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. ver 0 3/28 www.DataSheet4U.com Record of Revision Version 0 Date 2006/08/30 No First issue Old Description New Description Remark ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. ver 0 4/28 w w w . 1. General Description This specification applies to the 31.51 inch Color TFT-LCD Module T315XW02 V9. This LCD module has a TFT active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 31.51 inch. This module supports 1366x768 XGA-WIDE mode (Non-interlace). Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot. The T315XW02 V9 has been designed to apply the 8-bit 1 channel LVDS interface method. It is intended to support displays where high brightness, wide viewing angle, high color saturation, and high color depth are very important. * General Information Items Active Screen Size Display Area Outline Dimension Driver Element Display Colors Number of Pixels Pixel Pitch Pixel Arrangement Display Mode Surface Treatment Specification 31.51 inches 697.685 (H) x 392.256(V) 760.0(H) x 450.0(V) x 45(D) a-Si TFT active matrix 16.7M 1366 x 768 0.51075 RGB vertical stripe Normally Black AG, 3H Unit mm mm Note With inverter Colors Pixel mm ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. ver 0 5/28 www.DataSheet4U.com 2. Absolute Maximum Ratings The following are maximum values which, if exceeded, may cause permanent damage to the unit. Item Logic/LCD Drive Voltage Input Voltage of Signal BLU Input Voltage BLU Brightness Control Voltage Operating Temperature Operating Humidity Storage Temperature Storage Humidity Panel Surface Temperature Note 1: Duration:50 msec. Symbol Vcc Vin VDDB Vdim TOP HOP TST HST PST Min -0.3 -0.3 -0.3 -0.3 0 10 -20 10 Max 7.0 3.6 28 7.0 +50 90 +60 90 65 Unit [Volt] [Volt] [Volt] [Volt] [ C] [%RH] [ C] [%RH] [ C] o o o Conditions Note 1 Note 1 Note 1 Note 1 Note 2 Note 2 Note 2 Note 2 Note 2 : Maximum Wet-Bulb should be 39℃ and No condensation. The relative humidity must not exceed 90% non-condensing at temperatures of 40℃ or less. At temperatures greater than 40℃, the wet bulb temperature must not exceed 39℃. ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. ver 0 6/28 w w w 3. Electrical Specification The T315XW02 V1 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT array and liquid crystal. The second input power for the BLU, is to power inverter.. 3-1 Electrical Characteristics Parameter Min Values Typ Max Unit Notes LCD: Power Voltage Power Current Power Consumption Inrush Current LVDS Interface Differential Input High Threshold Voltage Differential Input Low Threshold Voltage Common Voltage Input Supply Input Vcc 4.5 5.0 5.5 Vdc 1 Supply Input Icc - 1.2 1.5 A 2 Pc IRUSH VTH - 6.0 - 7.5 TBD +100 Watt Apeak mV 2 3 4 VTL -100 mV 4 VCIM 1.10 1.25 1.40 V 4 CMOS Interface Input High Threshold Voltage Input Low Threshold Voltage VIH (High) VIL (Low) PDDB 2.4 3.3 Vdc 0 0.7 Vdc Backlight Power Consumption Life Time 78 87 96 Watt 5,6 60,000 Hours 7 Note : 1. 2. The ripple voltage should be controlled under 10% of VCC Vcc=5.0V, f v = 60Hz, fCLK=81.5Mhz , 25℃, Test Pattern : White Pattern Specs. ver 0 7/28 ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed www.DataSheet4U.com 3. Measurement condition : VCC 90% 10% GND Trush = 470 uS 4. VCIM = 1.2V VTH VCIM VTL 0V 5. The performance of the Lamp in LCM, for example life time or brightness, is extremely influenced by the characteristics of the DC-AC Inverter. So all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. When you design or order the inverter, please make sure unwanted lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker, etc) never occurs. When you confirm it, the LCD Assembly should be operated in the same condition as installed in your instrument. 6. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape, TFT-LCD Module have a low luminance and the inverter has abnormal action because leakage current occurs between lamp wire and conducting tape. 7. The relative humidity must not exceed 80% non-condensing at temperatures of 40℃ or less. At temperatures greater than 40℃, the wet bulb temperature must not exceed 39℃. When operate at low temperatures, the brightness of CCFL will drop and the life time of CCFL will be reduced. ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. ver 0 8/28 www.DataSheet4U.com 3-2 Interface Connections LCD connector (CN3): JAE FI-E30S or equivalent. AUO will notice Toshiba if we change the LCD connector from JAE to others. LVDS Transmitter: DS90C385 (NS) or equivalent Symbol Reserved Reserved Reserved GND RIN0RIN0+ GND RIN1RIN1+ GND RIN2RIN2+ GND RCLKRCLK+ GND RIN3RIN3+ GND Reserved Open or High Open or High Open or High Ground and Signal Return LVDS Channel 0 negative LVDS Channel 0 positive Ground and Signal Return for LVDS LVDS Channel 1 negative LVDS Channel 1 positive Ground and Signal Return for LVDS LVDS Channel 2 negative LVDS Channel 2 positive Ground and Signal Return for LVDS LVDS Clock negative LVDS Clock positive Ground and Signal Return for LVDS LVDS Channel 3 negative LVDS Channel 3 positive Ground and Signal Return Open or High Auo internal test pin Description note Auo internal test pin Auo internal test pin Auo internal test pin Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 LVDS Option Low for JEIDA, High/Open for NS Reserved GND GND GND Vcc Vcc Vcc Vcc Vcc Open Ground and Signal Return Ground and Signal Return Ground and Signal Return 5V, DC, Regulated 5V, DC, Regulated 5V, DC, Regulated 5V, DC, Regulated 5V, DC, Regulated Note: 1. All GND (ground) pins should be connected together and should also be connected to the LCD’s metal ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 - Specs. ver 0 9/28 No Reproduction and Redistribution Allowed www.DataSheet4U.com frame. All Vcc (power input) pins should be connected together. LVDS Option = L (GND) LVDS Option = H (3.3V) or Open ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. ver 0 10/28 www.DataSheet4U.com BACKLIGHT CONNECTOR PIN CONFIGURATION 1. Electrical specification Item Input Voltage Input Current (Stable Condition) Input Power (Stable Condition) Inrush Current On/Off Control Voltage On/Off Control Current Dimming Control Current Symb. VDDB IDDB PDDB IRUSH VBLON IBLON VDIM MAX MIN ON OFF Condition --VDDB=24V VDDB=24V VDDB=24V VDDB=24V VDDB=24V VDDB=24V VDDB=24V VDDB=24V Spec Min 21.6 3.24 78.0 --2.0 0.0 0.0 ----Typ 24.0 3.60 87 --------3.3 0.0 Max 26.4 3.96 96 6.0 5.0 0.8 1.5 ----Unit VDC ADC W ADC VDC mADC VDC Note 1 1 1,2 Note1 : VDIM= 3.3V (MAX) （Ta=25±5℃ , Turn on for 45minutes ） Note 2 : Measurement condition Rising time = 20 ms (VDDB : 10%~90%); 2. Input specification CN1: No 1 2 3 4 5 6 7 8 9 10 11 12 13 JST PHR-14 or equivalent Symbol VDDB (Main Power) VDDB (Main Power) VDDB (Main Power) VDDB (Main Power) VDDB (Main Power) GND GND GND GND GND Reserved VBLON (Enable Pin) VDIM (LCD Bright) Description DC input 24.0 VDC DC input 24.0 VDC DC input 24.0 VDC DC input 24.0 VDC DC input 24.0 VDC Ground Ground Ground Ground Ground Please leave it Open. On/Off control Signal; High: On; Low: Off Internal PWM Dimming control signal input (DC 0~3.3V) (3.3V : Maximum brightness, 0V min brightness) 14 Reserved Please leave it Open. ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. Ver 0 11/28 www.DataSheet4U.com 3-3 Signal Timing Specifications This is the signal timing required at the input of the User connector. All of the interface signal timing should be satisfied with the following specifications for it’s proper operation. * Timing Table DE only Mode Vertical Frequency: Notes: 1.) Display position is specific by the rise of DE signal only. Horizontal display position is specified by the rising edge of 1st DCLK after the rise of 1st DE, is displayed on the left edge of the screen. Vertical display position is specified by the rise of DE after a “Low” level period equivalent to eight times of horizontal period. The 1st data corresponding to one horizontal line after the rise the of 1st DE is displayed at the top line of screen. 3.) If a period of DE “High” is less than 1366 DCLK or less than 768 lines, the rest of the screen displays black. 4.) The display position does not fit to the screen if a period of DE “High” and the effective data period do not synchronize with each other. ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. ver 0 12/28 www.DataSheet4U.com Tv Tdisp(v) Th DE RGB Data 768 Line Invalid Data 1 Line 2 Line 3 Line 4 Line 768 Line Invalid Data CLK Th Tdisp(h) Tclk DE RGB Data Pixel 1366 Invalid Data Pixel 1 Pixel 2 Pixel 3 Pixel 4 Pixel 5 Pixel 6 Pixel 1366 Invalid Data Pixel 1 Pixel 2 ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed 3-4 Signal Timing Waveforms - Specs. Ver 0 13/28 www.DataSheet4U.com 3-5 Color Input Data Reference The brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. COLOR DATA REFERENCE Input Color Data Color MSB RED LSB MSB GREEN LSB MSB BLUE LSB R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red(255) Green(255) Basic Color Blue(255) Cyan Magenta Yellow White RED(000) RED(001) RED ---RED(254) RED(255) 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 0 0 1 0 0 0 1 1 1 0 1 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 1 1 1 0 1 0 0 GREEN(000) 0 GREEN(001) 0 GREEN ---GREEN(254) 0 GREEN(255) 0 BLUE(000) BLUE(001) BLUE ------BLUE(254) BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 ©Copyright AU Optronics, Inc. January, 2003 All Rights Reserved. T315XW02 V9 No Reproduction and Redistribution Allowed - Specs. Ver 0 14/28 www.DataSheet4U.com 3-6 Power Sequence for LCD Module 3.6.1 Power Sequence for LCD Power Supply For LCD Vcc (+5V) 90% 10% GND t1 t2 90% 10% 10% Interface Signal (LVDS data & CLK) t5 t6 t7 GND 10% Valid Data 10% Backlight on/off control signal (VBLON) t3 t4 Parameter Min. t1 t2 t3 t4 t5 t6 t7 1 0.4 0.5 500 10 0.5 Values Typ. Max. 20 50 50 300 - Units ms ms ms ms ms ms s *1 If t3=200ms, input black signal till 700ms from system if necessary In case of t3