Sandvik Bit Catalogue
April 14, 2018 | Author: Anonymous |
Category:
Documents
Description
Top hammer drilling tools Product catalogue Products from Sandvik Mining and Construction Tools Top hammer products Small hole drilling Drifting and tunneling Bench drilling Long hole drilling Rock reinforcement Shank adapters Grinding Auxiliary tools Product code information Safety information Numerical index with weight table Notes 3 17 33 49 63 73 91 113 119 121 122 131 Copyright Sandvik Mining and Construction Tools AB Sandviken This product catalogue is a presentation of the global stock standard range of top-hammer rock tools manufactured by Sandvik Mining and Construction Tools AB Concerning bit diameters Note that all bits are bigger on diameter than the given measurements in the catalogue. Cross bits: Button bits: Can be max 1 mm larger due to manufacturing tolerances. Are max 3,0 mm larger for some designs in order to make up for fast initial wear on the diameter. The minimum diameter is 1,5 mm above given measurement. Keep in mind that a bit always gives a bigger hole than the stated bit diameter. Bit classification code H M S C F V A N Very hard to hard rock Medium hard rock Soft rock _ > 2500 bar (250 MPa) 1500-2500 bar (150-250 MPa) < 1500 bar (150 MPa) Homogeneous (competent) rock Fissured rock Very abrasive rock Abrasive rock Non-abrasive rock _ > 40% silica 20-40% silica 0-20% silica Small hole drilling Small hole drilling Page H19 (3/4) Integral drill steels ..........................................................5 H22 (7/8") Integral drill steels ........................................................6 Reaming tools ...................................................................................7 H22 Tapered tools, 12° taper .........................................................8 H22 Tapered tools, 11° taper..........................................................9 Stone working tools .......................................................................10 R22 (7/8") Extension drilling tools ...............................................11 R23 (29/32") Extension drilling tools ...........................................12 R25 (1") Extension drilling tools ...................................................13 Sandvik Alpha. α250 bit thread ....................................................15 R28 (1 1/8") Extension drilling tools ............................................16 Small hole drilling H19 (3/4) Integral drill steels Series Dimensions L mm ft 400 800 1600 2400 600 1200 1' 2' 5' 7' 2' 3' Part No. in 4" 7" 3" 10" – 11" D mm 29 28 27 26 27 26 in 19/64" 1 7/64" 1 1/16" 1 1/32" 1 1/16" 1 1/32" 724-0429 724-0828 724-1627 724-2426 724-0627 724-1226 Shank 19 x 108 mm (3/4"x 4 1/4") A B 1-1_6 21 108 A 19 B 19 L 24 D Boulder steel 400 800 1' 2' 4" 7" 24 23 15/16" 29/32" 724-0424 724-0823 Shank 22 x 108 mm (7/8"x 4 1/4") A B 1-1_7 108 A 22 B 19 L D 400 400 800 1600 1' 1' 2' 5' 4" 4" 7" 3" 24 29 28 27 15/16" 1 9/64" 1 7/64" 1 1/16" 728-0424 728-0429 728-0828 728-1627 TOP HAMMER DRILLING TOOLS •5 Small hole drilling H22 (7/8") Integral drill steels Series Dimensions L mm ft 800 1600 2400 3200 4000 4800 5600 6400 7200 800 1600 2400 3200 4000 4800 5600 6400 7200 400 800 1200 1600 2000 600 1200 1800 2400 600 1200 1800 2400 2' 5' 7' 10' 13' 15' 18' 21' 23' 2' 5' 7' 10' 13' 15' 18' 21' 23' 1' 2' 3' 5' 6' 2' 3' 5' 7' 2' 3' 5' 7' Part No. in 7" 3" 10" 6" 1" 9" 4" – 8" 7" 3" 10" 6" 1" 9" 4" – 8" 4" 7" 11" 3" 7" – 11" 11" 10" – 11" 11" 10" D mm 34 33 32 31 30 29 28 27 26 40 39 38 37 36 35 34 33 32 34 33 32 31 30 35 34 33 32 41 40 39 38 in 1 11/32" 1 19/64" 1 1/4" 1 7/32" 1 3/16" 1 9/64" 1 7/64" 1 1/16" 1 1/32" 1 37/64" 1 17/32" 1 1/2" 1 29/64" 1 27/64" 1 3/8" 1 11/32" 1 19/64" 1 1/4" 1 11/32" 1 19/64" 1 1/4" 1 7/32" 1 3/16" 1 3/8" 1 11/32" 1 19/64" 1 1/4" 1 5/8" 1 37/64" 1 17/32" 1 1/2" 714-0834-65 714-1633-65 714-2432-65 714-3231 714-4030 714-4829 714-5628-50 714-6427-50 714-7226-50 714-0840-65 714-1639-65 714-2438-65 714-3237-65 714-4036-65 714-4835-65 714-5634-65 714-6433-65 714-7232-65 714-0434-65 714-0833-65 714-1232-65 714-1631 714-2030 714-0635-65 714-1234-65 714-1833-65 714-2432-65 714-0641-65 714-1240-65 714-1839-65 714-2438-65 Shank 22x108 mm (7/8" x 4 1/4") 11 A B 1-1_4 108 A 22 B 22 L D 12 13 16 17 Shank 22x108 mm (7/8"x 4 1/4") A B 1-1_4 108 A 22 B 22 L D 2000 8000 8800 9600 6' 26' 28' 31' 7" 3" 11" 6" 33 26 25 25 1 19/64" 1 1/32" 1" 1" 714-2033-65 714-8026-50 714-8825-5005 714-9625-5005 Shank 22x108 mm (7/8"x 4 1/4") A B 1-1 5 800 1600 2400 2' 5' 7' 7" 3" 10" 29 28 27 1 9/64" 1 7/64" 1 1/16" 714-0829 714-1628-50 714-2427-50 A 108 22 L B 22 D 6• TOP HAMMER DRILLING TOOLS Small hole drilling Reaming tools Pilot rod Reaming bit L mm ft in D mm Part No. in Pilot rod, Hex 22, 6° taper 800 1200 1600 2000 2500 2' 3' 5' 6' 8' 7 1/2" 11 3/4" 3" 6 3/4" 2 1/2" 26 26 26 26 26 1 1/32" 1 1/32" 1 1/32" 1 1/32" 1 1/32" 7922-6108-11 7922-6112-11 7922-6116-11 7922-6120-11 7922-6124-11 22 108 22 L 2-1_112 D Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Part No. Reaming bit, 6° taper 4x8 4x10 4x10 8x9 8x10 8x10 25° 30° 30° 64 76 89 2 1/2" 3" 3 1/2" 7722-4864-S45 7722-4876-S45 7722-4889-S45 2-1_110 D Knock-off tool for reaming bit 795-1469 2-1_114 TOP HAMMER DRILLING TOOLS •7 Small hole drilling H22 Tapered tools, 12° taper 1-1_27 Button bit, short skirt Tapered rod Button bit, long skirt Cross bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Part No. Button bit 2-1_466 D 1x5 1x5 1x5 1x5 1x7 1x7 4x7 4x7 35° 35° 28 30 1 1/8" 1 3/16" 7795-6428-B48 7795-6430-B48 Button bit 2-1_465 D 2x4 2x4 2x4 1x4 1x3,5 1x4 2x7 2x7 2x7 5x7 5x8 5x9 40° 40° 40° 32 35 38 1 1/4" 1 3/8" 1 1/2" 7795-5232-B48 7795-5235-B48 7795-5238-B48 Button bit 2-1_394 C D 2x4 2x4 1x3.5 1x3.5 2x7 2x7 5x7 5x8 40° 40° 33 35 1 9/64" 1 3/8" 7770-5233-B48 7770-5235-B48 Cross bit D 1x4 1x4 1x6 1x6 2x4 2x4 2x4.5 2x4.5 – – – – – – – – Dimensions L mm ft – – – – 28 30 32 35 1 1/8" 1 3/16" 1 1/4" 1 3/8" 7770-9028-42 7770-9030-42 7770-9032-42 7770-9035-42 Part No. 2-1_393 in D mm in Tapered rod, shank 22x108, carburized 610 1220 1830 2000 2440 3050 3660 2' 4' 6' 6' 8' 10' 12' – – – 7” – – – 22 22 22 22 22 22 22 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7870-6106-11 7870-6112-11 7870-6118-11 7870-6120-11 7870-6124-11 7870-6131-11 7870-6137-11 1-1_21 108 L Tapered rod, shank 22x108, HF-hardened - For surface drilling 2440 3200 4000 4400 4800 5600 6400 7200 8000 8800 8' 10' 13' 14' 15' 18' 21' 23' 26' 28' – 6” 1 1/2” 5” 9” 4 1/2” – 7 1/2” 3” 10 1/2” 22 22 22 22 22 22 22 22 22 22 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7/8" 7870-5124-11 7870-5132-11 7870-1140-11 7870-1144-11 7870-1148-11 7870-1156-11 7870-1164-11 7870-1172-11 7870-1180-11 7870-1188-11 1-1_21 108 L 8• TOP HAMMER DRILLING TOOLS Small hole drilling H22 Tapered tools, 11° taper 1-1_28 Tapered rod Button bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Part No. Button bit D 1x6 1x6 1x6 1x6 2x4 1x6 1x6 1x6 2x7 1x8 2x8 2x8 3x8 3x9 3x9 3x9 35° 40° 40° 40° 32 36 38 40 1 1/4" 1 7/16" 1 1/2" 1 37/64" 7776-1932-B48 7776-1936-B48 7776-1938-B48 7776-1940-B48 Button bit 2-1_466 2-1_464 1x6 D 1x6 2x8 4x8 40° 38 1 1/2" 7776-6438-B48 Button bit D 1x4 1x5 1x6 1x6 1x6 1x5 1x5 1x5 2x7 2x7 2x7 2x8 5x7 5x7 5x8 5x9 40° 35° 35° 35° 32 35 38 40 1 1/4" 1 3/8" 1 1/2" 1 37/64" 7776-4432-B48 7776-4435-B48 7776-4438-B48 7776-4440-B48 2-1_465 Dimensions L mm ft Part No. in D mm in Tapered rod, shank 22x108, carburized 610 800 1220 1830 2000 2440 3050 3600 2' 2’ 4' 6' 6’ 8' 10' 11' – 7 1/2” – – 7” – – 9 1/2” 22 22 22 22 22 22 22 22 7/8" 7/8” 7/8" 7/8" 7/8” 7/8" 7/8" 7/8" 7876-6106-11 7876-6108-11 7876-6112-11 7876-6118-11 7876-6120-11 7876-6124-11 7876-6131-11 7876-6136-11 1-1_21 108 L TOP HAMMER DRILLING TOOLS •9 Small hole drilling Stone working tools Plug hole integral steel 9-1_32 Shank rod Cross bit Dimensions L mm ft Part No. in D mm in Plug hole integral steel 19 D 9-1_31 108 L 150 160 200 240 280 310 160 190 6" 6 1/4" 7 7/8" 9 29/64" 11 1/32" 11 1/4" 6 1/4" 7 1/2" 17 20 20 20 20 20 22 22 21/32" 25/32" 25/32" 25/32" 25/32" 25/32" 7/8" 7/8" 721-1517 721-1620 721-2020 721-2420 721-2820 721-3120 721-1622 721-1922 Shank rod, Hex22 - R25 D D 2-1_207 255 800 1000 2' 3' 10 3/64" 2 1/2" 3" 22 22 22 7/8" 7/8" 7/8" 7802-6103-13 7802-6108-13 7802-6110-13 R 25 108 L Cross bit, R25 D 381 1/2" 411 5/8" 451 3/4" 7732-1438-42 7732-1441-42 7732-1045-42 9_13 10 • TOP HAMMER DRILLING TOOLS Small hole drilling R22 (7/8") Extension drilling tools Shank rod 2-1_395 Shank adapter Coupling sleeve Cross bit Extension rod Flushing hole, mm Front Gauge No Size No Size D mm in Bit classification Part No. Cross bit 2-1_ 77 1 4.5 2 4.5 38 1 1/2" – 7731-1038-42 D Dimensions L mm ft Part No. in D mm in Extension rod R22 - Hex 22 - R22 2-1_205 R 22 D L R 22 800 1200 1600 2' 3' 5' 7" 11" 3" 22 22 22 7/8" 7/8" 7/8" 7851-1308-20 7851-1312-20 7851-1316-20 Coupling sleeve, R22 140 2-1_80 – 5 1/2" 31 1 7/32" 7991-2031 D L Shank adapter/Shank rod, Hex 22 - R22 3-1_150 255 1000 – 3' 10 3/64" 3" 22 22 7/8" 7/8" 7801-6103-13 7801-6110-13 22 108 L R22 TOP HAMMER DRILLING TOOLS • 11 Small hole drilling R23 (29/32") Extension drilling tools MF-rod 2-1_502A Shank adapter Shank rod Cross bit Button bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 2-1_384 D 1 5.0 1 6.0 1 5.0 1 1 1 6 6 6 2x7 2x7 2x8 5x8 5x8 5x9 40° 35° 35° 35 38 41 1 3/8" 1 1/2" 1 5/8" HMCA HMCA HMCA 7737-5235-R48 7737-4438A-B48 7737-5241-R48 2-1_316 D 3 5.0 – 3x8 6x9 30° 45 1 3/4" HMCA 7737-5345-R48 Cross bit, Extra Heavy Duty 1 4.5 2-1_4 2 4.5 – – – 33 1 5/16" – 7737-1633-11 D Cross bit, Heavy Duty 2-1_4 D 1 4.5 1 4.5 2 2 4.5 4.5 – – L mm – – – – 35 38 1 3/8" 1 1/2" D mm – – 7737-1435-42 7737-1438-42 ft in in Part No. MF-rod, R23 - Hex 22 - R23 2-1 314 2095 3050 6' 10' 10 1/2" – 22 22 7/8" 7/8" 7857-4821-20 7857-4831-20 R23 D L R23 Female end OD 31 mm. Shank adapter / Shank rod, Hex 22 - R23 255 2400 3200 3600 – 8' 10' 11' 10 3/64" – – 9 5/8” 22 22 22 22 7/8" 7/8" 7/8" 7/8" 7807-6103-11 7807-6124-11 7807-6132-11 7807-6136-11 2-1_334 22 108 L R23 Shank rod, Hex 25 - R23 2-1_188c 255 3600 – 11' 10 3/64" 9" 25 25 1" 1" 7807-7103-11 7807-7136-11 25 108 L D R23 12 • TOP HAMMER DRILLING TOOLS Small hole drilling R25 (1") Extension drilling tools Shank rod 2-1_397 Button bit Shank adapter Coupling sleeve Extension rod Cross bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 2-1_384 D 1) 1) 1x5 1x5 1x5 1x5 1x6 1x6 1x6 1x6 2x7 2x7 2x7 2x8 5x8 5x9 5x9 5x9 35° 30° 35° 35° 35 38 38 41 1 3/8" 1 1/2" 1 1/2" 1 5/8" HMCA HMCA HMCA HMCA 7732-5235-S48 7732-5238-S48 7732-5238-R48 7732-5241-S48 2-1_316 D 3x4.5 – 3x8 6x9 40° 45 1 3/4" MSCFAN 7732-5345F-R48 Cross bit, Heavy Duty 2-1_4 D 1) 1) 1x5 1x5 1x5 2x5 2x5 2x5 – – – – – – – – – 35 38 41 1 3/8" 1 1/2" 1 5/8" – – – 7732-1435-42 7732-1438-42 7732-1441-42 Cross bit 2-1_3 D 1x5 1x5 2x5 2x5 – – – – – – 45 51 1 3/4" 2" – – 7732-1045-42 7732-1051-42 Dimensions L mm ft Part No. in D mm in Shank adapter / rod, Hex 22 x R25 3-1_149 22 108 L R25 255 800 1000 – 2' 3' 10 3/64" 7" 3" 22 22 22 7/8" 7/8" 7/8" 7802-6103-13 7802-6108-13 7802-6110-13 1) For one-rod drilling. TOP HAMMER DRILLING TOOLS • 13 Small hole drilling R25 (1") Extension drilling tools Dimensions L mm ft Part No. in D mm in Extension rod, R25 - Hex 25 - R25 915 1220 1525 1830 2435 3050 3' 4' 5' 6' 8' 10' – – – – – – 25 25 25 25 25 25 1" 1" 1" 1" 1" 1" 7852-2309-20 7852-2312-20 7852-2315-20 7852-2318-20 7852-2324-20 7852-2331-20 2-1_ 5 R 25 D R 25 L Coupling sleeve, R25 160 2-1_6 – 6 1/4" 35 1 3/8" 7992-2035 D L 14 • TOP HAMMER DRILLING TOOLS Small hole drilling 2-1_397b Sandvik Alpha. α250 bit thread Shank rod Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Button bit Bit classification Part No. Button bit 2-1_384 D 1x5 1x5 1x6 1x6 2x7 2x7 5x8 5x9 40° 35° 35 38 1 3/8" 1 1/2" HMCA HMCA 7764-5235-R48 7764-5238-R48 2-1_316_1 D 3x4.5 – 3x8 6x9 40° 45 1 3/4" MSCFAN 7764-5345F-R48 Dimensions L mm ft Part No. in D mm in Shank rod, Hex 25 - α250 2-1_188b 3600 11' 9 5/8 " 25 1" 7814-7136-11 25 108 L D 250 TOP HAMMER DRILLING TOOLS • 15 Small hole drilling R28 (1 1/8") Extension drilling tools 2-1_398b Button bit Cross bit Shank adapter Coupling sleeve Extension rod Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit, CAPP 52 D 1) 1) 1) 1x5 1x5 1x5 1x5 1x6 1x6 1x6 1x6 2x7 2x7 2x8 2x8 5x9 5x9 5x9 5x10 35° 30° 35° 35° 38 38 41 43 1 1/2" 1 1/2" 1 5/8" 1 11/16" MSCFAN HMCA HMCA HMCA 7739-5238-R48 7739-5238-S48 7739-5241-S48 7739-5243-S48 Cross bit, Heavy Duty 2-1_4 2-1_384 D 1) 1) 1x5 1x5 2x5 2x5 – – – – – – 38 1 1/2" 41 1 5/8" – – 7739-1438-42 7739-1441-42 Dimensions L mm ft Part No. in D mm in Extension rod, R28 - Hex 28 - R28 3050 2-1_16 10' – 28 1 1/8" 7859-2931-20 R 28 D L R 28 Coupling sleeve, R28 2-1_214 150 D – 5 29/32" 40 1 37/64" 7999-3640 L 1) For one-rod drilling. 16 • TOP HAMMER DRILLING TOOLS Drifting and tunneling Drifting and tunneling Page R25 (1") bit thread .........................................................................19 Sandvik Alpha. α250 bit thread ..................................................21 R28 (1 1/8") bit thread ..................................................................22 Sandvik Alpha. α280 bit thread ....................................................23 R32 (1 1/4") bit thread .................................................................24 Sandvik Alpha. α330 bit thread ...................................................27 Sandvik Jumbo. R35 (1 3/8") bit thread ......................................29 Sandvik Extra. R35 (1 3/8") bit thread .........................................31 Sandvik RT300 bit types ................................................................32 Drifting and tunneling R25 (1") bit thread Button bit 2-1_407 Shank adapter Coupling sleeve Drifter rod Cross bit Reaming tools Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. RT300 button bit, type 52 D 1x5 1x5 1x5 1x6 1x6 1x6 2x7 2x7 2x8 5x8 5x9 5x9 35° 30° 35° 35 38 41 1 3/8" 1 1/2" 1 5/8” HMCA HMCA HMCA 7732-5235-S48 7732-5238-S48 7732-5241-S48 RT300 button bit, type 52 for bolt ERB 120/120+ 1x5 2-1_384 2-1_384 1x6 2x7 5x9 30° 37 1 29/64" HMCA 7732-5237-S48 D Cross bit, Heavy Duty D 1x5 1x5 1x5 2x5 2x5 2x5 2-1_4 – – – – – – 35 38 41 1 3/8" 1 1/2" 1 5/8” – – – 7732-1435-42 7732-1438-42 7732-1441-42 Part No. Dimensions L mm ft in D mm in Drifter rod, R32 - Hex 25 - R25 2475 2630 3090 8' 8' 10' 1 21/32" 7 9/16” 1 21/32" 25 25 25 1" 1” 1" 7853-6224-20 7853-6226-20 7853-6231-20 2-1_337 R32 D L R25 Flushing hole Ø 8.8 mm. TOP HAMMER DRILLING TOOLS • 19 Drifting and tunneling R25 (1") bit thread Dimensions L mm ft Part No. in D mm in R32 coupling sleeve 2-1_17 D 150 – 5 29/32" 44 1 47/64" 7993-3644 L Reaming tools for cut holes / Pilot adapter, 6° taper D 2-1_116 Thread R25 – – 26 1 1/32" 7822-2526 Buttons, mm Front Gauge Angle Dimensions D mm in Part No. Reaming tools for cut holes / Reaming bit, 6° taper 2-1_110 D 4x8 4x10 4x10 8x9 8x10 8x10 25° 30° 30° 64 76 89 2 1/2" 3" 3 1/2" 7722-4864-S45 7722-4876-S45 7722-4889-S45 20 • TOP HAMMER DRILLING TOOLS Drifting and tunneling Sandvik Alpha. α250 bit thread 2-1_407b Button bit Cross bit Shank adapter Coupling sleeve Drifter rod Reaming tools Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Flushinghole, mm Front Gauge No Size No Size RT300 button bit, type 52 D 1x4,5 1x5 1x5 1x6 1x6 1x6 1x6 1x6 1x6 1x6 2x7 2x7 2x7 2x7 2x8 5x7 5x9 5x9 5x9 5x9 45° 35° 30° 35° 35° 33 35 37 38 41 1 5/16" 1 3/8" 1 29/64" 1 1/2" 1 5/8” HMCA HMCA HMCA HMCA HMCA 7764-4433-S48 7764-4435-S48 7764-5237-S48 7764-5238-S48 7764-5241-S48 Cross bit D 2-1_384 1x5 1x5 1x5 1x5 2x5 2x5 2x5 2x5 – – – – – – Dimensions L mm ft – – – 33 35 38 41 1 5/16" 1 3/8" 1 1/2" 1 5/8” D mm – – – – 7764-1633-42 7764-1435-42 7764-1438-42 7764-1441-42 Part No. 2-1_4 in in Drifter rod, R32 - Hex 25 - α250 2475 2630 3190 3700 8' 8' 10' 12' 1 7/16" 7 9/16" 5 19/32" 1 1/2" 25 25 25 25 1" 1" 1" 1" 7853-1724-20 7853-1726-20 7853-1731-20 7853-1737-20 2-1_337b R32 D L 250 Flushing hole Ø 8.6 mm. Drifter rod, R32 - Hex 28 - α250 2475 2630 2935 3190 8' 8' 9' 10' 1 7/16" 7 9/16" 7 9/16" 5 19/32" 28 28 28 25 1 1/8" 1 1/8" 1 1/8" 1" 7853-1824-20 7853-1826-20 7853-1829-20 7853-1831-20 2-1_337b R32 D L 250 Flushing hole Ø 8.8 mm. R32 coupling sleeve 2-1_17 D 150 – 5 29/32" 44 1 47/64" 7993-3644 L Reaming tools for cut holes / Pilot adapter, 6° taper D 2-1_116 Thread α250 – – Buttons, mm Front Gauge – 26 1 1/32" 7822-2726 Part No. Angle Dimensions D mm in Reaming tools for cut holes / Reaming bit, 6° taper 2-1_110 D 4x8 4x10 4x10 8x9 8x10 8x10 25° 30° 30° 64 76 89 2 1/2" 3" 3 1/2" 7722-4864-S45 7722-4876-S45 7722-4889-S45 TOP HAMMER DRILLING TOOLS • 21 Drifting and tunneling R28 (1 1/8") bit thread Shank adapter 2-1_407b Coupling sleeve Drifter rod Button bit Cross bit Reaming tools Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. RT300 button bit, type 52 D 1x5 1x5 1x5 1x6 1x6 1x6 2x7 2x7 2x8 5x9 5x9 5x9 35° 30° 35° 38 38 41 1 1/2" 1 1/2" 1 5/8" MCAN HMCA HMCA 7739-5238-R48 7739-5238-S48 7739-5241-S48 Cross bit , Heavy Duty 1x5 2-1_4 2-1_384 2x5 – – – 38 1 1/2" – 7739-1438-42 D Reaming tools for cut holes / Reaming bit 6° taper 2-1_110 D 4x8 4x10 4x10 8x9 8x10 8x10 25° 30° 30° 64 76 89 2 1/2" 3" 3 1/2" 7722-4864-S45 7722-4876-S45 7722-4889-S45 Reaming tools for cut holes / Pilot adapter 6° taper D 2-1_116 Thread R28 – – – 26 1 1/32" 7822-1526 Dimensions L mm ft Part No. in D mm in Drifter rod, R32 - Hex 28 - R28 2-1_339 3090 3700 10' 12' 1 21/32" 1 1/2" 28 28 1 1/8" 1 1/8" 7853-7631-20 7853-7637-20 R32 D L R28 Flushing hole Ø 8.8 mm. R32 Coupling sleeve 2-1_17 D 150 – 5 29/64" 44 1 47/64" 7993-3644 L 22 • TOP HAMMER DRILLING TOOLS Drifting and tunneling Sandvik Alpha. α280 bit thread Shank adapter 2-1_407b Coupling sleeve Drifter rod Button bit Cross bit Reaming tools Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. RT300 button bit, type 52 D 1x5 1x5 1x5 1x5 1x6 1x6 1x6 1x6 2x7 2x7 2x8 2x8 5x9 5x9 5x9 5x10 35° 30° 35° 35° 38 38 41 43 1 1/2" 1 1/2" 1 5/8" 1 11/16" MCAN HMCA HMCA HMCA 7765-5238-R48 7765-5238-S48 7765-5241-S48 7765-5243-S48 Cross bit , Heavy Duty 1x5 2-1_4 2-1_384 2x5 – – – 38 1 1/2" – 7765-1438-42 D Reaming tools for cut holes / Reaming bit 6° taper 2-1_110 D 4x8 4x10 4x10 8x9 8x10 8x10 25° 30° 30° 64 76 89 2 1/2" 3" 3 1/2" 7722-4864-S45 7722-4876-S45 7722-4889-S45 Reaming tools for cut holes / Pilot adapter 6° taper D 2-1_116 Thread αR28 280 – – – 26 1 1/32" 7822-2826 Dimensions L mm ft Part No. in D mm in Drifter rod, R32 - Hex 28 - α280 2-1_339 3090 3700 10' 12' 1 21/32" 1 1/2" 28 28 1 1/8" 1 1/8" 7853-2631-20 7853-2637-20 R32 D L α280 R28 Flushing hole Ø 8.8 mm. R32 Coupling sleeve 2-1_17 D 150 – 5 29/64" 44 1 47/64" 7993-3644 L TOP HAMMER DRILLING TOOLS • 23 Drifting and tunneling R32 (1 1/4") bit thread MF-rod Shank adapter Cross bit Coupling sleeve Drifter rod Reaming tools Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit RT300 button bit, type 52 D 1x5 1x5 1x5 1x6 1x6 1x6 1x7.5 1x7.5 1x7.5 1x7.5 1x7.5 1x7.5 2x9 2x9 2x9 2x9 2x10 2x10 5x10 5x11 5x11 5x11 5x12 5x12 35° 30° 30° 35° 35° 35° 43 45 45 48 51 51 1 11/16" 1 3/4" 1 3/4" 1 7/8" 2" 2" HMCVA HMCVA HCV HMCVA HMCVA HCV 7733-5243-S48 7733-5245-S48 7733-5245-S65 7733-5248-S48 7733-5251-S48 7733-5251-S65 RT300 button bit, type 54 D 2-1_386 2x6 2x6 2x7 2x7 – – – – 2x9 2x9 2x9 2x10 6x9 6x10 6x10 6x10 40° 35° 40° 40° 43 45 48 51 1 11/16" 1 3/4" 1 7/8" 2" MSCAN MSCAN MSCAN MSCAN 7733-5443-R48 7733-5445-R48 7733-5448-R48 7733-5451-R48 RT300 button bit, type 53 D 2-1_294 3x4.5 3x4.5 3x5 3x6 3x6 – – – – – 3x8 3x8 3x9 3x9 3x9 6x10 6x10 6x10 6x10 6x10 25° 30° 30° 35° 35° 45 45 48 51 51 1 3/4" 1 3/4" 1 7/8" 2" 2" HMCAN MSCAN HMCAN HMCAN MSCAN 7733-5345-S48 7733-5345-R48 7733-5348-S48 7733-5351-S48 7733-5351-R48 Cross bit, Heavy Duty 1x5 2-1_24 2-1_316 4x6 – – – 45 1 3/4" – 7733-1345A-42 D 24 • TOP HAMMER DRILLING TOOLS Drifting and tunneling R32 (1 1/4") bit thread Dimensions L mm ft Part No. in D mm in Drifter rod, R38 - Hex 35 - R32 3090 3700 4305 4915 10' 12' 14' 16' 1 21/32" 1 1/2" 1 31/64" 1 1/2" 35 35 35 35 1 3/8" 1 3/8" 1 3/8" 1 3/8" 7854-9631-20 7854-9637-20 7854-9643-20 7854-9649-20 2-1_342 R38 D L R32 Flushing hole Ø 9.5 mm. Drifter rod, R38 - Hex 32 - R32 3700 4305 4915 12' 14' 16' 1 1/2" 1 31/64" 1 1/2" 32 32 32 1 1/4" 1 1/4" 1 1/4" 7854-8637-20 7854-8643-20 7854-8649-20 2-1_342 R38 D L R32 Flushing hole Ø 9.6 mm. MF-rod, T38 - Hex 35 - R32 2-1_301 3700 4305 12' 14' 1 1/2" 1 31/64" 35 35 1 3/8" 1 3/8" 7324-6537-20 7324-6543-20 T 38 D L R 32 Flushing hole Ø 9.5 mm. Female end OD 56 mm. Drifter rod, T38 - Hex 32 - R32 D L 2-1_343 3700 4305 12' 14' 1 1/2" 1 31/64" 32 32 1 1/4" 1 1/4" 7324-8637-20 7324-8643-20 T38 R32 Flushing hole Ø 9.6 mm. Drifter rod, T38 - Hex 35 - R32 3090 3700 4305 4915 5525 6135 10' 12' 14' 16' 18' 20' 1 21/32" 1 1/2" 1 31/64" 1 1/2" 1 33/64" 1 1/2" 35 35 35 35 35 35 1 3/8" 1 3/8" 1 3/8" 1 3/8" 1 3/8" 1 3/8" 7324-9631-20 7324-9637-20 7324-9643-20 7324-9649-20 7324-9655-20 7324-9661-20 2-1_344 T38 D L R32 Flushing hole Ø 9.5 mm. Coupling sleeve 2-1_361 D R38 T38 170 191 – – 6 3/4" 7 1/2" 55 52 2 5/32" 2" 7994-3655 7314-3652 L TOP HAMMER DRILLING TOOLS • 25 Drifting and tunneling R32 (1 1/4") bit thread Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Part No. Reaming tools for cut holes / Pilot adapter, 6° taper D 2-1_116 Thread R32 – – – 26 1 1/32" 7822-3526 Reaming tools for cut holes / Reaming bit, 6° taper 2-1_110 D 4x8 4x10 4x10 8x9 8x10 8x10 25° 30° 30° 64 76 89 2 1/2" 3" 3 1/2" 7722-4864-S45 7722-4876-S45 7722-4889-S45 Reaming tools for cut holes / Pilot adapter, 12° taper D 2-1_117 Thread R32 – – – 40 1 37/64" 7821-3440 Reaming tools for cut holes / Reaming bit, 12° taper 4x10 4x12 4x12 8x12 8x12 8x12 35° 35° 35° 89 102 127 3 1/2" 4" 5" 7721-4889-S45 7721-4802-S45 7721-4827-S45 2-1_118 D Flushing hole, mm Front Gauge No size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Part No. Reaming tools for cut holes / Reaming bit, R32 2x6 2-1_538 2x6 1x13 16x13 35° 102 4" 7733-5602-S45 D 26 • TOP HAMMER DRILLING TOOLS Drifting and tunneling Sandvik Alpha. -1_409b α330 bit thread Button bit Shank adapter Coupling sleeve Drifter rod Reaming tools Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. RT300 button bit, type 52 1x5 1x5 1x5 1x6 1x7.5 1x7.5 1x7.5 1x7.5 2x9 2x9 2x9 2x9 5x10 5x11 5x11 5x11 35° 30° 30° 35° 43 45 45 48 1 11/16" 1 3/4" 1 3/4" 1 7/8" HMCVA HMCVA HCV HMCVA 7766-5243-S48 7766-5245-S48 7766-5245-S65 7766-5248-S48 2-1_386b D RT300 button bit, type 54 2-1_294b 2x6 2x6 D – – 2x9 2x9 6x9 6x10 40° 35° 43 45 1 11/16" MSCAN 1 3/4" MSCAN 7766-5443-R48 7766-5445-R48 RT300 button bit, type 53 2-1_316b D 3x4.5 3x4.5 3x5 3x5 3x6 3x6 1x5 1x5 1x5 1x5 1x5 1x5 3x8 3x8 3x9 3x9 3x9 3x9 6x10 6x10 6x10 6x10 6x10 6x10 30° 25° 30° 30° 35° 35° 45 45 48 48 51 51 1 3/4" 1 3/4" 1 7/8" 1 7/8" 2" 2" MSCAN HMCAN MSCAN HMCAN MSCAN HMCAN 7766-5345A-R48 7766-5345A-S48 7766-5348A-R48 7766-5348A-S48 7766-5351A-R48 7766-5351A-S48 Cross bit 1x5 1x5 2-1_24 4x6 2x7.5 45 48 1 3/4" 1 7/8" 7766-1345A-42 7766-1448-42 D Dimensions L mm ft Part No. in D mm in Drifter rod, T38 - Hex 35 - α330 3090 3700 4305 4915 5525 10' 12' 14' 16' 18' 1 21/32" 1 1/2" 1 31/64" 1 1/2" 1 33/64" 35 35 35 35 35 1 3/8" 1 3/8" 1 3/8" 1 3/8" 1 3/8" 7324-4131-20 7324-4137-20 7324-4143-20 7324-4149-20 7324-4155-20 2-1_470 T38 D Flushing hole Ø 9.5 mm. L α 330 Drifter rod, T38 - Round 39 - α 330 3090 3700 4305 4915 5525 6135 6400 10' 12' 14' 16' 18' 20' 21' 1 21/32" 1 1/2" 1 31/64" 1 1/2" 1 33/64" 1 1/2" – 39 39 39 39 39 39 39 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 1 1/2" 7324-4231-20 7324-4237-20 7324-4243-20 7324-4249-20 7324-4255-20 7324-4261-20 7324-4264-20 2-1_469 T38 D Flushing hole Ø 10.3 mm. L α 330 TOP HAMMER DRILLING TOOLS • 27 Drifting and tunneling Sandvik Alpha. α330 bit thread Dimensions L mm ft Part No. in D mm in T38 coupling sleeve 2-1_361 D 191 – 7 1/2" 52 2" 7314-3652 L Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Part No. Reaming tools for cut holes / α330 reaming bit 2x6 2-1_538b 2x6 1x13 16x13 35° 102 4" 7766-5602-S45 D Reaming tools for cut holes / Reaming bit, 12° taper 4x10 4x12 4x12 8x12 8x12 8x12 35° 35° 35° 89 3 1/2" 102 4" 127 5" 7721-4889-S45 7721-4802-S45 7721-4827-S45 2-1_118 D Reaming tools for cut holes / Pilot adapter, 12° taper D 2-1_117b 40 1 37/64” 7821-3040 Thread α330 28 • TOP HAMMER DRILLING TOOLS Drifting and tunneling Sandvik Jumbo. R35 (1 3/8") bit thread 2-1_506 Shank adapter Coupling sleeve Drifter rod, Round Drifter rod, Hex. Button bit Reaming tools Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. RT300 button bit, type 53 D 3x5 3x5 3x5 3x5 3x6 3x6 1x5 1x5 – – – – 3x9 3x9 3x9 3x9 3x9 3x9 6x10 6x10 6x10 6x10 6x10 6x10 30° 30° 30° 30° 35° 35° 48 48 48 48 51 51 1 7/8" 1 7/8" 1 7/8" 1 7/8" 2" 2" HMCAN MSCAN HMCAN MSCAN HMCAN MSCAN 7738-5348A-S48 7738-5348A-R48 7738-5348-S48 7738-5348-R48 7738-5351-S48 7738-5351-R48 RT300 button bit, type 52 2-1_511 2-1_316 D 1x5 1x5 1x7.5 1x7.5 2x9 2x10 5x11 5x12 35° 35° 48 51 1 7/8" 2" HMCVA HMCVA 7738-5248-S48 7738-5251-S48 Cross bit, Heavy Duty 1x5 2-1_24 2x7.5 – – – 48 1 7/8" – 7738-1448-42 D Dimensions L mm ft Part No. in D mm in Drifter rod, T38 - Round 39 - R35 4305 4915 5525 14' 16' 18' 1 31/64" 1 1/2" 1 33/64" 39 39 39 1 1/2" 1 1/2" 1 1/2" 7324-7243-20 7324-7249-20 7324-7255-20 2-1_469 T38 D L R35 Flushing hole Ø 14.5 mm. Drifter rod, T38 - Hex 35 - R35 4305 4915 5525 6135 14' 16' 18' 20' 1 31/64" 1 1/2" 1 33/64" 1 1/2" 35 35 35 35 1 3/8" 1 3/8" 1 3/8" 1 3/8" 7324-8543-20 7324-8549-20 7324-8555-20 7324-8561-20 2-1_470 T38 D L R35 Flushing hole Ø 9.5 mm. T38 coupling sleeve 191 2-1_227 – 7 1/2" 52 2" 7314-3652 D T38 L T38 TOP HAMMER DRILLING TOOLS • 29 Drifting and tunneling Sandvik Jumbo. R35 (1 3/8") bit thread Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Part No. Reaming tools for cut holes / Pilot adapter, 12° taper Thread R35 D 2-1_117 – – – 40 1 37/64" 7821-5440 Reaming tools for cut holes / Reaming bit, 12° taper 4x10 4x12 4x12 8x12 8x12 8x12 35° 35° 35° 89 102 127 3 1/2" 4" 5" 7721-4889-S45 7721-4802-S45 7721-4827-S45 2-1_118 D Flushing hole, mm Front Gauge No size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Part No. Reaming tools for cut holes / Reaming bit, R35 2x6 2-1_538 2x6 1x13 16x13 35° 102 4" 7738-5602-S45 D 30 • TOP HAMMER DRILLING TOOLS Drifting and tunneling Sandvik Extra. R35 (1 3/8") bit thread Button bit 2-1_536 Shank adapter Drifter rod Button bit retrac Drifter extension rod Reaming tools Drifter extension rod Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge Size Size Angle Dimensions D mm in Bit classification Part No. Button bit, Retrac R35 2-1_508 3x6 3x6 D – – – – 3x9 3x9 3x11 3x11 Dimensions L mm ft 25° 30° 54 54 2 1/5" 2 1/5" HMCFAN MSCFAN 7738-7854-S48 7738-7854-R48 Part No. in D mm in Drifter rod, T35 - Round 39 - R35 4305 4915 5525 6135 14’ 16' 18' 20' 1 31/64 1 1/2" 1 33/64” 1 1/2" 39 39 39 39 1 1/2” 1 1/2" 1 1/2" 1 1/2" 7327-5243-20 7327-5249-20 7327-5255-20 7327-5261-20 2-1_308b T 35 D R 35 L Flushing hole Ø 14.5 mm. Female end OD 48,2 mm. Drifter Extension rod, T35 - Round 39 - T35 3050 2-1_308c 10' – 39 1 1/2" 7327-4731-20 T 35 D T 35 L Flushing hole Ø 14.5 mm. Female end OD 48,2 mm. TOP HAMMER DRILLING TOOLS • 31 Drifting and tunneling Sandvik RT300 bits Sandvik RT300 bits for drifting and tunneling are available in three basic designs Type 52 2-1_542 Designed for hard and abrasive rock Type 53 2-1_543 Allround design for most types of rock Type 54 2-1_544 Designed for soft and less abrasive rock Non standard bits The products shown in this catalogue are stock standard items. Within our standard range it is possible to find products suitable for the majority of drilling conditions. Outside of this range we however undertake to manufacture non standard products to suit very special conditions. Options Following options are available for non standard RT300 bits for drifting and tunneling. When ordering non-standard products, a letter that describes the option must be included in the Part No. Example: An R32, RT300 type 53, 45mm bit with an extra hole for side flushing, will get the Part No.: 7733-5345A-S48. A = One extra hole for side flushing B = Two extra holes for side flushing C = Grooves for front flushing (53 type >48mm) D = Grooves for front flushing and one extra hole for side flushing (53 type >48mm) E = Grooves for front flushing and two extra holes for side flushing (53 type >48mm) F = One size smaller gauge buttons (53/54 type) Note: If a bit has one hole for side flushing as standard, an A in the Part No. will give the bit one extra hole for side flushing, e.g. the bit will have two holes for side flushing. Options - Cemented Carbide Grades Cemented carbide grade is indicated with the last letter and two digits in the Part No. Following cemented carbide grades are available as non-standard. S65 = Spherical DP65 buttons on 52 and 53 type R65 = Ballistic DP65 buttons on 53 type >43mm R55 = Ballistic DP55 buttons on 53 and 54 type >43mm 32 • TOP HAMMER DRILLING TOOLS Bench drilling Bench drilling Page R32 (1 1/4")....................................................................................35 T35(1 3/8") ....................................................................................37 T38 (1 1/2") ...................................................................................38 T45 (1 3/4") ....................................................................................41 T51 (2") .......................................................................................... 44 Sandvik GT60 ...............................................................................46 Bench drilling R32 (1 1/4") Coupling sleeve Extension rod Guide tube Button bit 2-1_487 Shank adapter MF-rod MF-rod Button bit retrac Cross bit Guide bit Coupling sleeve Extension rod Coupling sleeve Extension rod Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 2-1_316_1 D 3x6 3x6 3x6 – – – 3x9 3x9 3x10 6x10 6x10 6x11 35° 35° 35° 51 51 57 2" 2" 2 1/4" HMCAN MSCAN HMCAN 7733-5351-S48 7733-5351-R48 7733-5357C-S48 Button bit 2x9 2-1_22 – 4x10 8x10 30° 64 2 1/2" HMCAN 7733-2664-S45 D Button bit 1) 2-1_486 2x9 – 6x10 8x11 35° 76 3" HMCAN 7733-2676-S45 D 1) For very short holes only. Button bit, Retrac 2-1_508 D 3x6 3x6 2x9 – – – 3x10 3x10 4x10 6x11 6x11 8x10 30° 30° 30° 51 51 64 2" 2" 2 1/2" HMCFVA MSCFAN HMCFVA 7733-7851-S45 7733-7851-R55 7733-7864-S45 Cross bit 2-1_23 1x5 1x5 D 2x7.5 2x7.5 – – – – – – 51 64 2" 2 1/2" MSCFAN MSCFAN 7733-1451-42 7733-1064-42 Guide bit 2-1_600 D 3x6 3x6 − − 3x8 4x8 6x10 6x10 40º 40º 51 57 2" 2 1/4" – – 7733-8251-R45 7733-8257-R45 TOP HAMMER DRILLING TOOLS • 35 Bench drilling R32 (1 1/4") Bit dia, mm Dimensions L mm ft in Part No. D mm in Guide Tube 2-1_425 51-64 51-64 1830 3050 6' 10' – – 46 46 1 3/4" 1 3/4" 7953-4618-20 7953-4631-20 R 32 D L R 32 Female end OD 46 mm. MF-rod, R32 - Round 32 - R32 2-1_276 3050 3660 10' – 12' – 32 32 1 1/4" 1 1/4" 7853-5131-20 7853-5137-20 R 32 D L R 32 Flushing hole Ø 9.2 mm. Wrench flat 25.4 mm. Female end OD 45 mm. Extension rod, R32 - Round 32 - R32 2435 3050 3660 8' – 10' – 12' – 32 32 32 1 1/4" 1 1/4" 1 1/4" 7853-3324-30 7853-3331-30 7853-3337-30 2-1_29 R 32 D L R 32 Flushing hole Ø 11.7 mm. Wrench flat 25.4 mm. Coupling sleeve R32 2-1_220 150 D – 5 29/32" 44 1 47/64" 7993-3644 L 36 • TOP HAMMER DRILLING TOOLS Bench drilling T35(1 3/8") 2-1_545 Shank adapter MF-rod Button bit retrac Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit, Retrac T35 2-1_508 3x6 3x6 D – – 3x9 3x10 6x11 6x11 35° 35° 54 2 1/6" 57 2 1/4" MSCFAN MSCFAN 7517-7854-R45 7517-7857-R45 Dimensions L mm ft Part No. D mm in MF-rod, T35 - Round 39 - T35 2-1_308c 3050 3660 4265 10' 12' 14' 39 39 39 1 1/2" 1 1/2" 1 1/2" 7327-4731-20 7327-4737-20 7327-4743-20 T 35 D T 35 L Female end OD 48,2 mm. Flushing hole Ø 14,5 mm. TOP HAMMER DRILLING TOOLS • 37 Bench drilling T38 (1 1/2") MF-rod Guide tube Button bit Shank adapter MF-rod MF-rod Button bit Retrac X-bit Guide bit 2-1_488 Coupling sleeve Extension rod Coupling sleeve Extension rod Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 2x11 2x11 2x11 D 3x11 2x11 3x10 – – – – _ _ 4x10 4x10 6x10 6x10 6x10 6x10 8x10 8x10 8x10 8x11 8x10 9x11 35° 30° 35° 40° 35° 35° 64 64 70 76 76 89 2 1/2" 2 1/2" 3 3/4" 3" 3" 3 1/2" MSCAN HMCAN HMCAN MSCAN HMCAN HMCAN 7514-2664-R55 7514-2664-S45 7514-2670-S45 7514-2676-R55 7514-2676-S45 7514-2689-S45 2-1_322 Button bit 2-1_323 3x7 3x7 D – – 3x11 3x11 6x12 6x12 30° 30° 64 64 2 1/2" 2 1/2" HMCVA HCV 7514-3864-S45 7514-3864-S65 Button bit 2-1_324 3x9 3x9 D – – 4x11 4x11 7x12 7x12 35° 35° 76 76 3" 3" HMCVA HMCV 7514-3876-S45 7514-3876-S65 Button bit, Drop Center 3x8 3x8 4x7 4x8 – – – – 4x9 4x9 6x10 6x10 6x10 6x10 8x11 8x11 35° 40° 30° 35° 64 64 76 76 2 1/2" 2 1/2" 3" 3" MCAN SCAN MCAN SCAN 7514-5964-S45 7514-5964-R55 7514-5976-S45 7514-5976-R55 2-1_489 D Button bit, Retrac 2-1_490 2x11 2x11 D – – 4x10 4x10 8x10 8x10 30° 35° 64 64 2 1/2" 2 1/2" HMCFAN MSCFAN 7514-7864-S45 7514-7864-R55 38 • TOP HAMMER DRILLING TOOLS Bench drilling T38 (1 1/2") Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit, Retrac 2-1_491 2x11 2x11 D 2x11 – – – 6x10 6x10 6x10 8x10 8x11 8x11 35° 35° 40° 70 76 76 2 3/4" 3" 3" HMCFAN HMCFAN MSCFAN 7514-7870-S45 7514-7876-S45 7514-7876-R55 Button bit, Retrac, Drop Center 3x8 3x8 4x7 4x8 – – – – 4x9 4x9 6x10 6x10 6x10 6x10 8x11 8x11 35° 40° 30° 35° 64 64 76 76 2 1/2" 2 1/2" 3" 3" MCFAN SCFAN MCFAN SCFAN 7514-7964-S45 7514-7964-R55 7514-7976-S45 7514-7976-R55 2-1_492 D X-bit 2-1_41 1x7.5 1x7.5 D 2x7.5 2x7.5 – – – – – – 64 76 2 1/2" 3" – – 7514-4064-11 7514-4076A-11 Guide bit 3x8 2-1_601 – 4x9 6x11 35° 64 2 1/2" MSCFAN 7514-8264-R45 D Dimensions L mm ft Part No. in D mm in Guide tube 2-1_426 Bit dia. mm 64-76 64-76 1830 3660 6' 12' – – 56 56 2 13/64" 2 13/64" 7955-5618-20 7955-5637-20 T 38 D L T 38 Female end OD 56 mm. MF-rod, T38 - Round 39 - T38 2-1_308 3050 3660 4265 10' 12' 14' – – – 39 39 39 1 1/2" 1 1/2" 1 1/2" 7324-4731-70 7324-4737-70 7324-4743-70 T 38 D T 38 L Flushing hole Ø 14.5 mm. Female end OD 56 mm. TOP HAMMER DRILLING TOOLS • 39 Bench drilling T38 (1 1/2") Dimensions L mm ft Part No. in D mm in Extension rod, T38 - Round 39 - T38 2-1 47 3050 3660 10' 12' – – 39 39 1 1/2" 1 1/2" 7324-4331C-30 7324-4337C-30 T 38 D T 38 L Flushing hole Ø 14.5 mm. Wrench flat 32 mm. Light extension rod, T38 - Hex 32 - T38 3050 2-1_67b 10' – 32 1 1/4" 7324-6931-20 T38 D L T 38 Flushing hole Ø 9.6 mm. T38 coupling sleeve 2-1_220 191 D – 7 1/2" 55 2 5/32" 7314-3355 L 40 • TOP HAMMER DRILLING TOOLS Bench drilling T45 (1 3/4") Coupling Extension rod sleeve 2-1_493b Guide tube Button bit Shank adapter MF-rod MF-rod Button bit retrac Guide bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 2-1_494 2x12 2x12 D – – 6x10 6x10 8x11 8x11 35° 40° 76 76 3" 3" HMCAN MSCAN 7515-2676-S45 7515-2676-R55 Button bit 2-1_495 D 3x10 3x10 3x10 – – – 6x10 6x10 6x12 9x11 9x11 9x12 40° 35° 35° 89 3 1/2" 89 3 1/2" 102 4" MSCAN 7515-2689-R55 HMCAN 7515-2689-S45 HMCAN 7515-2602-S45 Button bit 3x9 3x9 2-1_324 – – 4x11 4x11 7x12 7x12 35° 35° 76 76 3" 3" HMCVA HCV 7515-3876-S45 7515-3876-S65 D Button bit 2x13 2x13 2-1_496 – – 6x13 6x13 8x13 8x13 35° 35° 89 89 3 1/2" 3 1/2" HMCVA HCV 7515-3889-S45 7515-3889-S65 D Button bit, Drop Center 4x7 4x8 4x8 4x8 4x9 4x9 – – – – – – 6x10 6x10 6x11 6x11 7x12 7x12 8x11 8x11 8x12 8x12 8x13 8x13 30° 35° 35° 40° 35° 40° 76 76 89 89 102 102 3" 3" 3 1/2" 3 1/2" 4" 4" MCAN SCAN MCAN SCAN MCAN SCAN 7515-5976-S45 7515-5976-R55 7515-5989-S45 7515-5989-R55 7515-5902-S45 7515-5902-R55 2-1_497 D Button bit, Retrac 2-1_491 2x12 2x12 D – – 6x10 6x10 8x11 8x11 35° 40° 76 76 3" 3" HMCFAN MSCFAN 7515-7876-S45 7515-7876-R55 TOP HAMMER DRILLING TOOLS • 41 Bench drilling T45 (1 3/4") Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit, Retrac 2-1_498 D 3x10 3x10 3x10 – – – 6x10 6x10 6x12 9x11 9x11 9x12 35° 40° 35° 89 89 102 3 1/2" 3 1/2" 4" HMCFAN 7515-7889-S45 MSCFAN 7515-7889-R55 HMCFAN 7515-7802-S45 Button bit, Retrac, Drop Center 4x7 4x7 D 4x7 4x8 4x8 4x9 4x9 – – – – – – – 5x10 6x10 6x10 6x11 6x11 7x12 7x12 8x10 8x11 8x11 8x12 8x12 8x13 8x13 35° 30° 35° 35° 40° 40° 35° 70 76 76 89 89 102 102 2 3/4” 3" 3" 3 1/2" 3 1/2" 4" 4" SCFAN MCFAN SCFAN MCFAN SCFAN SCFAN MCFAN 7515-7970-R55 7515-7976-S45 7515-7976-R55 7515-7989-S45 7515-7989-R55 7515-7902-R55 7515-7902-S45 2-1_499 Guide bit 2-1_602 D 4x8 4x8 4x10 – – – 5x10 6x10 6x11 8x10 8x11 8x12 35º 35º 40º 70 76 89 2 3/4” 3" 3 1/2" MSCFAN 7515-8270-R45 MSCFAN 7515-8276-R45 MSCFAN 7515-8289-R45 Dimensions L mm ft Part No. in D mm in Guide tube 2-1_427 Bit dia. mm 76-89 76-89 89-102 T 45 D T 45 L 1830 3660 3660 6' 12' 12' – – – 63 63 76 2 1/2" 2 1/2" 3" 7956-6318-21 7956-6337-70 7956-7637-70 Female end OD 63 mm / 76 mm. MF-rod T45 - Round 46 - T45 3050 3660 4265 6095 10' 12' 14' 20' – – – – 46 46 46 46 1 3/4" 1 3/4" 1 3/4" 1 3/4" 7325-7731-70 7325-7737-70 7325-7743-70 7325-7761-70 2-1_235 T 45 D L T 45 Flushing hole Ø 17 mm. Female end OD 63 mm. 42 • TOP HAMMER DRILLING TOOLS Bench drilling T45 (1 3/4") Dimensions L mm ft Part No. in D mm in Extension rod T45 - Round 46 - T45 3050 3660 4265 6095 10' 12' 14' 20' – – – – 46 46 46 46 1 3/4" 1 3/4" 1 3/4" 1 3/4" 7325-7331C-30 7325-7337C-30 7325-7343C-30 7325-7361C-30 2-1_66 T 45 D T 45 L Flushing hole Ø 17 mm. Wrench flat 38 mm. T45 coupling sleeve 2-1_236 210 D – 8 1/8" 63 2 31/64" 7315-3663 T 45 L T 45 TOP HAMMER DRILLING TOOLS • 43 Bench drilling T51 (2") Coupling sleeve Extension rod Guide tube Button bit 2-1_503a Shank adapter MF- rod MF- rod Button bit, Retrac Coupling Coupling Extension rod sleeve Extension rod sleeve Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 3x12 3x12 3x12 3x13 – – – – 6x10 6x12 9x12 9x13 9x11 9x12 9x13 9x14 35° 35° 35° 35° 89 102 115 127 3 1/2" 4" 4 1/2" 5" HMCAN HMCAN HMCAN HMCAN 7516-2689-S45 7516-2602-S45 7516-2615-S45 7516-2627-S45 2-1_495 D Button bit, Drop Center 4x10 4x10 D 4x11 4x11 4x10 4x10 – – – – – – 6x11 7x11 7x12 7x12 7x13 7x14 8x12 8x12 8x13 8x13 8x14 8x14 35° 40° 35° 40° 35° 35° 89 89 102 102 115 127 3 1/2" 3 1/2" 4" 4" 4 1/2" 5” MCAN SCAN MCAN SCAN MCAN MCAN 7516-5989-S45 7516-5989-R55 7516-5902-S45 7516-5902-R55 7516-5915-S45 7516-5927-S45 2-1_497 Button bit, Retrac 3x12 3x12 3x12 3x12 – – – – 6x10 6x10 6x12 9x12 9x11 9x11 9x12 9x13 35° 40° 35° 35° 89 89 102 115 3 1/2" 3 1/2" 4" 4 1/2" HMCFAN MSCFAN HMCFAN HMCFVA 7516-7889-S45 7516-7889-R55 7516-7802-S45 7516-7815-S45 2-1_498 D Button bit, Retrac, Drop Center 4x10 4x10 D 4x11 4x11 4x10 4x11 4x10 – – – – – – – 6x11 7x11 7x12 7x12 7x13 7x13 7x14 8x12 8x12 8x13 8x13 8x14 8x14 8x14 35° 40° 35° 40° 35° 40° 35° 89 89 102 102 115 115 127 3 1/2" 3 1/2" 4" 4" 4 1/2" 4 1/2" 5" MCFAN SCFAN MCFAN SCFAN MCFAN SCFAN MCFAN 7516-7989-S45 7516-7989-R55 7516-7902-S45 7516-7902-R55 7516-7915-S45 7516-7915-R55 7516-7927-S45 2-1_499 Button bit, Retrac, Flat face 2-1_556a D 3x14 3x15 3x14 – – – 9x11 10x12 10x13 9x11 9x14 9x14 35° 35° 35° 102 4" 115 4 1/2" 127 5" HMSCFVA 7516-4902-S45 HMSCFVA 7516-4915-S45 HMSCFVA 7516-4927-S45 44 • TOP HAMMER DRILLING TOOLS Bench drilling T51 (2") Dimensions L mm ft Part No. in D mm in Guide tube Thread Bit dia. mm 89-102 89-102 102-127 2-1_429 T 51 D T 51 L 1830 3660 3660 6' 12' 12' – – – 76 76 87 3" 3" 3 1/2" 7957-7618-20 7957-7637-70 7957-8737-70 Female end OD 76 / 87 mm. MF-rod, T51 - Round 52 - T51 2-1_289 3660 4265 6095 12' 14' 20' – – – 52 52 52 2" 2" 2" 7326-5537-70 7326-5543-70 7326-5561-70 T 51 D L T 51 Flushing hole Ø 21.5 mm. Female end OD 71 mm. Extension rod, T51 - Round 52 - T51 2-1_290 3660 4265 6095 12' 14' 20' – – – 52 52 52 2" 2" 2" 7326-5337C-30 7326-5343C-30 7326-5361C-30 T 51 D L T 51 Flushing hole Ø 21.5 mm. Wrench flat 45 mm. Coupling sleeve, T51 2-1_291a D 225 225 – – 8 7/8" 8 7/8" 71 76 2 51/64" 3" 7316-3671 7316-3676 L TOP HAMMER DRILLING TOOLS • 45 Bench drilling Sandvik GT60 Button bit MF- rod Shank adapter MF- rod Flushinghole, mm Front Gauge No Size No Size MF- rod 2-1_548 Pilot tube Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Button bit, Retrac Part No. Button bit, Drop Center 4x11 4x11 4x11 4x11 4x12 4x12 – – – – – – 7x12 7x13 7x13 7x14 4x16+4x13 4x16+4x14 8x13 8x14 8x14 8x14 8x16 8x16 35° 35° 40° 35° 35° 35° 102 115 115 127 140 152 4" 4 1/2" 4 1/2" 5" 5 1/2” 6” MCAN MCAN SCAN MCAN MCAN MCAN 7620-5902-S45 7620-5915-S45 7620-5915-R55 7620-5927-S55 7620-5940-S55 7620-5952-S55 2-1_500 D Button bit, Flat Face, Heavy Duty 2x14 2x14 3x12 3x13 3x13 3x14 – – – – – – 6x12 6x12 6x12 6x13 6x14 6x12 8x14 8x14 9x14 9x14 9x16 9x16 35° 35° 35° 35° 35° 35° 92 96 102 115 127 140 3 5/8" 3 3/4" 4" 4 1/2" 5" 5 1/2" MCAN MCAN MCAN MCAN MCAN MCAN 7620-3892-S45 7620-3896-S45 7620-3802-S45 7620-3815-S45 7620-3827-S55 7620-3840-S55 2-1_496 D Button bit, Retrac 2-1_549c 2x14 2x14 D – – 9x12 10x12 9x12 9x13 40° 40° 92 3 5/8" 102 4" MSCFAN MSCFAN 7620-8792-R45 7620-8702-R45 Button bit, Retrac, Drop Center 4x10 4x11 4x11 D 4x11 4x12 – – – – – 6x12 7x12 7x13 7x14 4x16+4x13 8x13 8x13 8x14 8x14 8x16 35° 35° 35° 35° 35° 96 102 115 127 140 3 3/4" 4" 4 1/2" 5" 5 1/2” MCFAN MCFAN MCFAN MCFAN MCFAN 7620-7996-S45 7620-7902-S45 7620-7915-S45 7620-7927-S55 7620-7940-S55 2-1_549b Button bit, Retrac, Drop Center 2-1_549d 3x12 D – 4x13 6x14 40° 92 3 5/8" SCFAN 7620-4792-R55 2-1_549b 4x11 D 4x11 – – 7x12 7x13 8x13 8x14 40° 40° 102 115 4" 4 1/2" SCFAN SCFAN 7620-7902-R55 7620-7915-R55 46 • TOP HAMMER DRILLING TOOLS Bench drilling Sandvik GT60 Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit, Retrac, Flat Face 3x12 3x12 3x13 3x14 3x14 – – – – – 9x11 10x12 10x13 10x14 12x14 9x13 9x14 9x14 9x16 9x16 35° 35° 35° 35° 35° 102 115 127 140 152 4" 4 1/2" 5" 5 1/2” 6” HMSCFVA HMSCFVA HMSCFVA HMSCFVA HMSCFVA 7620-4902-S45 7620-4915-S45 7620-4927-S55 7620-4940-S55 7620-4952-S55 2-1_556 D 2-1_549d 3x13 D – 6x13 9x16 35° 118 4 5/8" HMCFVA 7620-8118-S55 Dimensions L mm ft Part No. in D mm in MF-rod, GT60 - Round 60 (64) - GT60. For bits from 96 mm. 3660 4265 6095 4265 12' 14' 20' 14' 60 60 60 64 2 3/8" 2 3/8" 2 3/8" 2 1/2" 7610-1137-70 7610-1143-70 7610-1161-70 7610-1243-70 2-1_546 GT60 D L GT60 Flushing hole Ø 22.5 mm. Female end OD 85 mm. MF-rod, GT60 - Round 60 - GT60. For 92-115 mm bits. 4265 2-1_546 14' - 60 2 3/8" 7610-1443-70 GT60 D L GT60 Flushing hole Ø 22.6 mm. Female end OD 82 mm. Pilot Tube 1600 4265 5335 5' 14' 17' 3" – 6" 87 87 76 3 1/2" 3 1/2" 3" 7640-8716-70 7640-8743-70 7640-7653-70 2-1_547 GT60 D GT60 L Female end OD 85 mm (82 mm on 76 mm tubes) TOP HAMMER DRILLING TOOLS • 47 Long hole drilling Long hole drilling underground Page R32 (1 1/4").....................................................................................................51 T35 (1 3/8") ....................................................................................................53 T38 (1 1/2") ....................................................................................................54 T45 (1 3/4") .....................................................................................................56 T51 (2") ............................................................................................................58 T45 (1 3/4") tube drilling tools......................................................................60 ST58 (2 1/4") tube drilling tools ....................................................................61 ST68 (2 3/4") tube drilling tools.....................................................................62 Long hole drilling underground R32 (1 1/4") Coupling sleeve Extension rod Guide tube Button bit 2-1_487 Shank adapter MF-rod MF-rod Button bit retrac Cross bit Coupling sleeve Extension rod Coupling sleeve Extension rod Pilot adapter Guide bit Reaming bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 2-1_316_1 D 3x6 3x6 3x6 – – – 3x9 3x9 3x10 6x10 6x10 6x11 35° 35° 35° 51 51 57 2" 2" 2 1/4" HMCVA MSCAN HMCVA 7733-5351-S48 7733-5351-R48 7733-5357C-S48 Button bit, Retrac 3x6 2-1_508 – 3x10 6x11 30° 51 2" HMCFVA 7733-7851-S45 D Cross bit 1x5 2-1_23 2x7.5 – – – 51 2" – 7733-1451-42 D Guide bit 2-1_600 D 3x6 3x6 − − 3x8 4x8 6x10 6x10 40º 40º 51 57 2" 2 1/4" MSCFAN MSCFAN 7733-8251-R45 7733-8257-R45 TOP HAMMER DRILLING TOOLS • 51 Long hole drilling underground R32 (1 1/4") Dimensions L mm ft in Part No. D mm in Guide Tube 1830 2-1_425 6' – 46 1 3/4" 7953-4618-20 R 32 D L R 32 Female end OD 46 mm. MF-rod, R32 - Round 32 - R32 915 1220 1525 1830 3' 4' 5' 6' – – – – 32 32 32 32 1 1/4" 1 1/4" 1 1/4" 1 1/4" 7853-5109-20 7853-5112-20 7853-5115-20 7853-5118-20 2-1_276 R 32 D L R 32 Flushing hole Ø 9.2 mm. Wrench flat 25.4 mm. Female end OD 45 mm. Extension rod, R32 - Round 32 - R32 915 1220 1525 1830 3' 4' 5' 6' – – – – 32 32 32 32 1 1/4" 1 1/4" 1 1/4" 1 1/4" 7853-3309-20 7853-3312-20 7853-3315-20 7853-3318-20 2-1_29 R 32 D L R 32 Flushing hole Ø 11.7 mm. Wrench flat 25.4 mm. R32 coupling sleeve 2-1_220a 150 D – 5 29/32" 44 1 47/64" 7993-3644 L Dimensions L mm ft Part No. in D mm in Pilot adapter for reaming of 51 mm (2") pilot holes 2-1_126 Thread R32 D – – – 47 1 7/8" 7823-3647 T Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Reaming bit 4x12 2-1_127 8x12 35° 102 4" – 7723-4802-S45 D 52 • TOP HAMMER DRILLING TOOLS Long hole drilling underground T35 (1 3/8") 2-1_545 Shank adapter MF-rod Button bit retrac Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit, Retrac 2-1_508 3x6 3x6 D – – 3x9 3x10 6x11 6x11 35° 35° 54 57 2 1/6" 2 1/4" MSCFAN MSCFAN 7517-7854-R45 7517-7857-R45 Dimensions L mm ft Part No. D mm in MF-rod, T35 - Round 39 - T35 1830 2-1 308c 6' 39 1 1/2" 7327-4718-20 T 35 D T 35 L Female end OD 48,2 mm. TOP HAMMER DRILLING TOOLS • 53 Long hole drilling underground T38 (1 1/2") MF-rod 2-1_488 Guide tube Button bit MF-rod Button bit Retrac X-bit Pilot adapter Guide bit Reaming bit MF-rod Shank adapter Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 2-1_322 D 2x11 2x11 2x11 – – _ 4x10 6x10 6x10 8x10 8x10 8x10 30° 35° 35° 64 70 76 2 1/2" 3 3/4" 3" HMCVA HMCVA HMCVA 7514-2664-S45 7514-2670-S45 7514-2676-S45 Button bit 2-1_323 3x7 3x7 D – – 3x11 3x11 6x12 6x12 30° 30° 64 64 2 1/2" 2 1/2" HMCVA HMCVA 7514-3864-S45 7514-3864-S65 Button bit 2-1_324 3x9 3x9 D – – 4x11 4x11 7x12 7x12 35° 35° 76 76 3" 3" HMCVA HCV 7514-3876-S45 7514-3876-S65 Button bit, Drop Center 2-1_489 3x8 4x7 D – – 4x9 6x10 6x10 8x11 35° 30° 64 76 2 1/2" 3" HMCVA HMCVA 7514-5964-S45 7514-5976-S45 Button bit, Retrac 2x11 2-1_490 – 4x10 8x10 30° 64 2 1/2" HMCFVA 7514-7864-S45 D Button bit, Retrac 2-1_491 2x11 2x11 D 2x11 – – – 6x10 6x10 6x10 8x10 8x11 8x11 35° 35° 40° 70 76 76 2 3/4" 3" 3" HMCFVA HMCFVA MSCFAN 7514-7870-S45 7514-7876-S45 7514-7876-R55 54 • TOP HAMMER DRILLING TOOLS Long hole drilling underground T38 (1 1/2") Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit, Retrac, Drop Center 3x8 3x8 4x7 4x8 – – – – 4x9 4x9 6x10 6x10 6x10 6x10 8x11 8x11 35° 40° 30° 35° 64 64 76 76 2 1/2" 2 1/2" 3" 3" HMCFVA MSCFAN HMCFVA MSCFAN 7514-7964-S45 7514-7964-R55 7514-7976-S45 7514-7976-R55 2-1_492 D Guide bit 3x8 2-1_601 – 4x9 6x11 35° 64 2 1/2" MSCFAN 7514-8264-R45 D X-bit 1x7.5 2-1_41 2x7.5 – – – 64 2 1/2" – 7514-4064-11 D Dimensions L mm ft Part No. in D mm in Guide tube 2-1_426 1830 6' – 56 2 13/64" 7955-5618-20 T 38 D L T 38 Female end OD 56 mm. MF-rod, T38 - Round 39 - T38 2-1_308 T 38 D T 38 L 1220 1525 1830 4' 5' 6' – – – 39 39 39 1 1/2" 1 1/2" 1 1/2" 7324-4712C-20 7324-4715C-20 7324-4718C-20 Flushing hole Ø 14.5 mm. Female end OD 56 mm. Pilot adapter for reaming of 51 mm (2") pilot holes 2-1_126 Thread T38 D – – 47 1 7/8" 7823-2647 T Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Reaming bit 4x12 4x12 2-1_127 8x12 8x12 35° 35° 102 127 4" 5" – – 7723-4802-S45 7723-4827-S45 D TOP HAMMER DRILLING TOOLS • 55 Long hole drilling underground T45 (1 3/4") Guide tube Button bit 2-1_493a Shank adapter MF-rod MF-rod Button bit retrac Guide bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 2-1_494 D 2x12 2x13 2x13 – – – 6x10 6x13 6x13 8x11 8x13 8x13 35° 35° 35° 76 89 89 3" 3 1/2" 3 1/2" HMCVA HMCVA HMCV 7515-2676-S45 7515-3889-S45 7515-3889-S65 Button bit 3x9 3x9 2-1_324 – – 4x11 4x11 7x12 7x12 35° 35° 76 76 3" 3" HMCVA HMCV 7515-3876-S45 7515-3876-S65 D Button bit, Drop Center 2-1_497 4x7 4x8 D – – 6x10 6x11 8x11 8x12 30° 35° 76 89 3" 3 1/2" HMCVA HMCVA 7515-5976-S45 7515-5989-S45 Button bit, Retrac 2x12 2-1_491 – 6x10 8x11 35° 76 3" HMCFVA 7515-7876-S45 D Button bit, Retrac, Drop Center 2-1_499 D 4x7 4x8 – – 6x10 6x11 8x11 8x12 30° 35° 76 89 3" 3 1/2" HMCFVA HMCFVA 7515-7976-S45 7515-7989-S45 Guide bit 2-1_602 4x8 4x8 D 4x10 – – – 5x10 6x10 6x11 8x10 8x11 8x12 35º 35º 40º 70 76 89 2 3/4” 3" 3 1/2" MSCFAN 7515-8270-R45 MSCFAN 7515-8276-R45 MSCFAN 7515-8289-R45 56 • TOP HAMMER DRILLING TOOLS Long hole drilling underground T45 (1 3/4") Dimensions L mm ft Part No. in D mm in Guide tube 1830 2-1_427 6' – 63 2 31/64" 7956-6318-21 T 45 D T 45 L Female end OD 63 mm / 76 mm. MF-rod T45 - Round 46 - T45 2-1_235 1525 1830 5' 6' – – 46 46 1 3/4" 1 3/4" 7325-7715C-20 7325-7718C-20 T 45 D L T 45 Flushing hole Ø 17 mm. Female end OD 63 mm. TOP HAMMER DRILLING TOOLS • 57 Long hole drilling underground T51 (2") Coupling sleeve Extension rod Guide tube Button bit 2-1_503a Shank adapter MF- rod MF- rod Button bit, Retrac Bit adapter coupling Coupling Coupling Extension rod sleeve Extension rod sleeve Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. Button bit 3x12 3x12 2-1_495 – – 6x10 6x12 9x11 9x12 35° 35° 89 3 1/2" 102 4" HMCVA HMCVA 7516-2689-S45 7516-2602-S45 D Button bit, Drop Center 2-1_497 4x10 4x11 D – – 6x11 7x12 8x12 8x13 35° 35° 89 3 1/2" 102 4" HMCVA HMCVA 7516-5989-S45 7516-5902-S45 Button bit, Retrac 2-1_498 3x12 3x12 D – – 6x10 6x12 9x11 9x12 35° 35° 89 102 3 1/2" 4" HMCFVA HMCFVA 7516-7889-S45 7516-7802-S45 Button bit, Retrac, Drop Center 2-1_499 4x10 4x11 D – – 6x11 7x12 8x12 8x13 35° 35° 89 102 3 1/2" 4” HMCFVA HMCFVA 7516-7989-S45 7516-7902-S45 Button bit, Retrac, Flat face 3x14 2-1_556a – 9x11 9x11 35° 102 4" MSCFVA 7516-4902-S45 D 58 • TOP HAMMER DRILLING TOOLS Long hole drilling underground T51 (2") Dimensions L mm ft Part No. in D mm in Guide tube 2-1_429 1830 6' – 76 3" 7957-7618-20 T 51 D T 51 L Female end OD 76 / 87 mm. MF-rod, T51 - Round 52 - T51 2-1_289 1525 1830 5’ 6' – – 52 52 2” 2" 7326-5515C-20 7326-5518C-20 T 51 D L T 51 Flushing hole Ø 21.5 mm. Female end OD 71 mm. TOP HAMMER DRILLING TOOLS • 59 Long hole drilling underground T45 (1 3/4") tube drilling tools 2-1_478 Shank adapter Drill tube Button bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. XDC, button bit 4x7.5 2-1_477 – 6x10 8x11 35° 76 3" HMCVA 7525-8476-R65 D Dimensions L mm ft Part No. in D mm in Drill tube, T45 - Round 65 - T45 D 2-1_348 1525 1830 5' 6' – – 65 65 2 1/2" 2 1/2" 7985-6315-26 7985-6318-26 T 45 T 45 L Flushing hole Ø 18 mm. 60 • TOP HAMMER DRILLING TOOLS Long hole drilling underground ST58 (2 1/4") tube drilling tools Button bit 2-1_479 Shank adapter Drill tube Button bit, Guide Reaming bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle Dimensions D mm in Bit classification Part No. XDC, button bit 4x10 2-1_477 – 6x12 8x12 35° 89 3 1/2" HMCVA 7528-8489-R65 D Reaming bit 6X16 2-1_445b 9X16 35° 152 6” – 7528-5652C-S65 D Pilot diameter 76 mm. Dimensions L mm ft Part No. in D mm in Drill tube, ST58 - Round 76 - ST58 2-1_351 1525 1830 5' 6' – – 76 76 3" 3" 7378-7615-26 7378-7618-26 ST 58 L Flushing hole Ø 26 mm. D ST 58 TOP HAMMER DRILLING TOOLS • 61 Long hole drilling underground ST68 (2 3/4") tube drilling tools Button bit 2-1_484a Shank adapter Drill tube Button bit, Guide Reaming bit Flushinghole, mm Front Gauge No Size No Size Buttons, mm Front Gauge No Size No Size Angle 8x12 8x14 10x12 10x14 35° 35° Dimensions D mm in 102 4" 115 4 1/2" Bit classification HMCVA HMCVA Part No. XDC, button bit 2-1_483 4x10 4x10 D – – 7529-8402-R65 7529-8415-R65 Button bit, Heavy Duty 2-1_451 2x15 D – 6x14 8x14 35° 102 4" HCV 7529-6902-S65 XDC, button bit, Guide 2-1_482 4x10 4x10 D – – 8x12 8x14 10x12 10x14 35° 35° 102 115 4" HMCVA 4 1/2" HMCVA 7529-7302-R65 7529-7315-R65 Collaring bit 3x18 2-1_357C – 8x16 9x16 35° 152 6" – 7529-6652-S45 D Reaming bit 2-1_445a 6x16 D 9x16 35° 152 6” – 7529-5652C-S65 Pilot diameter 95 mm. Dimensions L mm ft Part No. in D mm in Drill tube, ST68 - Round 87 - ST68 1525 1525 1830 5' 5' 6' – – – 87 87 87 3 1/2" 3 1/2" 3 1/2" 7379-8715-26 7379-8715-46 1) 7379-8718-26 2-1_352 ST 68 L 1) D ST 68 FLushing hole Ø 30 mm. Permanent back flow valve. 62 • TOP HAMMER DRILLING TOOLS Rock reinforcement Rock reinforcement Page Sandvik RX300 expandable rock bolts ..........................................................66 High pressure water pumps ...........................................................................69 Installation arm for RX300 bolts .................................................................70 Cleaning lance & Pull tester ............................................................................71 Rock reinforcement Sandvik RX 300 product range The Sandvik RX300 Expandable Rock Bolts are available in two basic qualities, simply called the ERB-line and the ERB Plus-line. Each of them including products with three load capacity variants – 120 kN, 160 kN and 240 kN. The main difference between the two qualities is elongation characteristics. The ERB Plus-line is made of a “softer” steel quality and has gone through an annealing process. Due to this it can be stretched longer and more even before breaking compared to the standard ERB-line quality. This gives the ERB Plus-line better capacity to follow rock deformation and is for that reason better suited for rock conditions with squeezing ground or high strain concentrations areas. The standard ERB-line quality is suitable for most other applications. Corrosion protection and coating The steel grades used for manufacturing of RX 300 bolts are not corrosion protected, meaning that during overseas transportation and long storage time the bolts may be corroded. Normally this does not affect the product quality. For overseas transportation and long storage time the bolts can be coated with an anti-corrosive agent. This will prevent corrosion during transport and storage but not after bolt installation. In very corrosive conditions or for increased service life, the bolts can be covered with Corrolastic Expander Paint. This will prevent corrosion also after bolt installation. Part No Key 7970-xxxx-xx 0 No corrosion protection 1 With anti-corrosive agent 2 With Corrolastic Expander Paint 1 ERB Standard 2 ERB Plus (+) Length of the bolt in mm TOP HAMMER DRILLING TOOLS • 65 Rock reinforcement Sandvik RX300 expandable rock bolts Length L mm Weight kg Part No. ERB 120 / 120+ 600 900 1.200 1.500 1.600 1.800 2.000 2.100 2.400 2.700 3.000 3.300 3.600 4.000 4.500 5.000 5.500 6.000 1,20 1,80 2,40 3,00 3,20 3,60 4,00 4,20 4,80 5,40 6,00 6,60 7,20 8,00 9,00 10,00 11,00 12,00 7970-600-xx 7970-900-xx 7970-1200-xx 7970-1500-xx 7970-1600-xx 7970-1800-xx 7970-2000-xx 7970-2100-xx 7970-2400-xx 7970-2700-xx 7970-3000-xx 7970-3300-xx 7970-3600-xx 7970-4000-xx 7970-4500-xx 7970-5000-xx 7970-5500-xx 7970-6000-xx L ERB 120 Tube thickness Bolt diameter Original tube diameter Profile diameter Bushing head diameter Upper bushing diameter Hole diameter Optimal hole diameter Breaking load Minimum elongation Typical elongation 2 mm 28 mm 41 mm 27.5 mm 30/36 mm 28 mm 32 - 39 mm 35 - 38 mm 120 kN 10 % up to 30 % ERB 120+ 2 mm 28 mm 41 mm 27.5 mm 30/36 mm 28 mm 32 - 39 mm 35 - 38 mm 120 kN 20 % Dimensions mm Weight kg Part No. Face plate for ERB 120 Steel grade ST37 Flat Flat 150 x 150 x 6 150 x 150 x 8 1,08 1,44 7970-P156 7970-P158 Flat Steel grade ST37 Domed 150 x 150 x 4 0,66 7970-P154D Domed 66 • TOP HAMMER DRILLING TOOLS 8-1_107b 8-1_107 Rock reinforcement Sandvik RX300 expandable rock bolts Length L mm Weight kg Part No. ERB 160 / 160+ 1.800 2.100 2.400 2.700 3.000 3.300 3.600 4.000 4.500 5.000 5.500 6.000 5,22 6,09 6,96 7,83 8,70 9,57 10,44 11,60 13,05 14,50 15,95 17,40 7972-1800-xx 7972-2100-xx 7972-2400-xx 7972-2700-xx 7972-3000-xx 7972-3300-xx 7972-3600-xx 7972-4000-xx 7972-4500-xx 7972-5000-xx 7972-5500-xx 7972-6000-xx 8-1_106 L ERB 160 Tube thickness Bolt diameter Original tube diameter Profile diameter Bushing head diameter Upper bushing diameter Hole diameter Optimal hole diameter Breaking load Minimum elongation Typical elongation 2 mm 38 mm 54 mm 36 mm 41/48 mm 38 mm 43 - 52 mm 45 - 51 mm 160 kN 10 % up to 30 % ERB 160+ 2 mm 38 mm 54 mm 36 mm 41/48 mm 38 mm 43 - 52 mm 45 - 51 mm 160 kN 20 % Dimensions mm Weight kg Part No. Face plate for ERB 160 Steel grade ST37 Flat Flat 150 x 150 x 6 150 x 150 x 8 1,08 1,44 7971-P156 7971-P158 Flat 8-1_107 Steel grade ST37 Domed 150 x 150 x 4 0,66 7971-P154D Domed 8-1_107b TOP HAMMER DRILLING TOOLS • 67 Rock reinforcement Sandvik RX300 expandable rock bolts Length L mm Weight kg Part No. ERB 240 / 240+ 1.800 2.100 2.400 2.700 3.000 3.300 3.600 4.000 4.500 5.000 5.500 6.000 7,20 8,40 9,60 10,80 12,00 13,20 14,40 16,00 18,00 20,00 22,00 24,00 7971-1800-xx 7971-2100-xx 7971-2400-xx 7971-2700-xx 7971-3000-xx 7971-3300-xx 7971-3600-xx 7971-4000-xx 7971-4500-xx 7971-5000-xx 7971-5500-xx 7971-6000-xx 8-1_106 L ERB 240 Tube thickness Bolt diameter Original tube diameter Profile diameter Bushing head diameter Upper bushing diameter Hole diameter Optimal hole diameter Breaking load Minimum elongation Typical elongation 3 mm 38 mm 54 mm 36 mm 41/48 mm 38 mm 43 - 52 mm 45 - 51 mm 240 kN 10 % up to 30 % ERB 240+ 3 mm 38 mm 54 mm 36 mm 41/48 mm 38 mm 43 - 52 mm 45 - 51 mm 240 kN 20 % Dimensions mm Weight kg Part No. Face plate for ERB 240 Steel grade ST37 Flat Flat 150 x 150 x 6 150 x 150 x 8 1,08 1,44 7971-P156 7971-P158 Flat 8-1_107 Steel grade ST37 Domed 150 x 150 x 4 0,66 7971-P154D Domed 68 • TOP HAMMER DRILLING TOOLS 8-1_107b Rock reinforcement High pressure water pumps Part No. RX520E high pressure water pump for RX300 bolts Electric high-pressure water pump for installation of RX300 expandable rock bolts Complete pump unit 8-1_109 790-4200 Technical data Spare Parts and Accessories Water filter 60μ Repair Kit 3 Sealings Repair Kit 10 Valves High-pressure hose DN 10, 300 bar, 10 meter 791-4101 791-4102 791-4103 791-4105 Maximum output ................. 21 l/min. Maximum output ............... 1.260 l/h Operating pressure, up to . 320 bar Maximum working pressure 300 bar Electricity supply................. 32A / 400V Rpm of the pump............... 400 rpm Current consumption......... 25 A Dimensions (LxWxH) ........ 700mm x 550mm x 620mm Weight ............................... 76 kg Dimension of nozzle .......... 055 Protection of splash proof . IP 55 RX510H - 510E high pressure water pump for RX300 bolts Hydraulic/Electric water pump for installation of RX300 expandable rock bolts Complete pump unit 8-1_115 Technical data RX510H RX510E RX510H RX510E 790-3100 790-4100 Maximum output ................. 14 l/min Maximum output ................. 840 l/h bar Operating pressure............ 320 bar Maximum working pressure 300 bar Normal Voltage .................. 2 • 12 V (24V) Driving efficiency .............. 7,5 kW Rpm of the pump............... 1400 Oil pressure ....................... 170 - 200 bar Oil quantity ........................ max 40 l/min Amperage .......................... Dimensions in mm (L•W•H) 670•350•515 Approx. weight .................. 52 kg Nozzle dimension .............. 040 Recoil ................................ 66 N Protection of splash proof . IP 55 14 l/min 840 l/h bar 320 bar 300 bar 400V 7,5 kW 1400 Spare Parts and Accessories 16A 670•350•515 42 kg 040 66 N IP 55 Water filter 60μ Repair Kit 3 Sealings Repair Kit 10 Valves High-pressure hose DN 10, 300 bar, 10 meter 791-4101 791-4102 791-4103 791-4105 TOP HAMMER DRILLING TOOLS • 69 Rock reinforcement High pressure water pumps & Installation arm Part No. RX500P high pressure water pump for RX300 bolts Pneumatic high-pressure water pump for installation of RX300 expandable rock bolts Complete pump unit 790-1100 8-1_117 Technical data Spare Parts and Accessories Pump type ............................ Working pressure, water ... Max output flow, water ...... Press. amplification (air-water) Input air pressure................ Air consumption (5 bar) ..... Input water pressure ......... Stroke volume, water ........ Dimensions (LxWxH) ........ Weight ............................... Pneumatic 320 bar 9 l/min, 540 l/h 64 times 5-8 bar 50-60 l/s 3-10 bar 50 cm3 720mm x 375mm x 360mm 34 kg Water filter 60μ Repair Kit 3 Sealings Repair Kit 10 Valves High-pressure hose DN 10, 300 bar, 10 meter 791-4101 791-4102 791-4103 791-4105 Installation arm for RX300 bolts 8-1_116 High-pressure installation arm for RX300 expandable rock bolts. All vital components are specially selected to withstand peak pressures up to 500 bar. Installation Arm with nozzle head, ERB 120/120+ incl. 10 m high pressure hose 790-2100 Installation Arm with nozzle head, ERB 160/160+ and 240/240+ incl. 10 m high-pressure hose High–pressure hose DN, 300 bar, 10 meters 790-2200 791-4105 70 • TOP HAMMER DRILLING TOOLS Rock reinforcement Cleaning lance & Pull tester Part No. Cleaning lance for Sandvik high pressure water pumps 8-1_118 The high-pressure water pumps RX510E, RX510H and RX520E for installation of Sandvik RX300 expandable rock bolts are also suitable for cleaning of vehicles such as loaders and drilling jumbos, if this cleaning lance is used. High-pressure cleaning lance High-pressure hose DN, 300 bar,10 meters 790-2300 791-4105 Pull tester equipment for RX300 bolts Hydralic pull tester for RX300 bolts, with digital pressure gauge. Complete pull tester 790-6100 8-1_119 TOP HAMMER DRILLING TOOLS • 71 Shank adapters Shank adapters Page Shank rods ..................................................................................... 75 Atlas Copco ................................................................................... 76 Boart .............................................................................................. 79 Furukawa ....................................................................................... 80 Gardner-Denver, Ingersoll-Rand and Klemm ............................. 81 Montabert ..................................................................................... 82 SIG.................................................................................................. 83 Sandvik ........................................................................................... 84 Secoma and Toyo .......................................................................... 89 ROCK DRILL CATEGORIES BE = bench drilling BO = bolting DS = dimensional stone drilling PD = production drilling underground (long hole drilling) TU = drifting and tunneling Shank rods Dimensions, mm Flushing tube Thread L Part No. For hexagonal bushing 22 x 108 mm 3-1_15 22 4.5-5.0 4.5-5.0 4.5-5.0 R22 R23 R25 255 255 255 7801-6103-13 7807-6103-11* 7802-6103-13 108 L Flushing hole Ø 6.7 mm. For hexagonal bushing 25 x 108 mm 25 3-1_17 4.5-5.0 4.5-5.0 R23 R25 255 255 7807-7103-11* 7802-7103-14 108 L Flushing hole Ø 8.6 mm. For hexagonal bushing 25 x 159 25 3-1 22 8 R25 255 7802-7503-20 159 L Flushing hole Ø 8.6 mm. * No packing. Not suitable for hydraulic machines with water flushing. TOP HAMMER DRILLING TOOLS • 75 Shank adapters Atlas Copco Dimensions, mm Hammer category Flushing tube Thread L Part No. Atlas Copco BBC 43, 44, 45 and 100 31.7 32 3-1_26 TU 48 20.5 10 R32 380 7803-3100-30 19 L Atlas Copco BBC 51, 52, 54 and 120 38.1 3-1_29 TU TU 57.2 25.4 10 10 R32 T38 380 390 7803-4200-30 7304-4200-30 32 L Atlas Copco BBE 57 44.4 44.6 3-1_31 BE 64.4 13.4 14 T38 537 7304-7502-60 80 L Atlas Copco COP 125, 130 and 131 38.1 38.7 3-1_12 TU,BE,PD 52 14 T38 380 7304-4500-60 32 L Atlas Copco COP 1032 HD 34 45 3-1_120 TU,BO 54 9 – R32 340 7803-3588-01 58 L 3-1_120b 34 55 TU,BO 54 9 – R38 340 7804-3575-01 58 L Atlas Copco COP 1032 33.9 44.9 3-1_242 BE 53.9 8.8 – T35 550 7307-3576-01 58.5 L 76 • TOP HAMMER DRILLING TOOLS Shank adapters Atlas Copco Dimensions, mm Hammer category Flushing hole Thread L Part No. Atlas Copco COP 1032 LE 34 45 3-1_122 BE,DS 54 9 – R32 550 7803-3576-01 58 L Atlas Copco COP 1036/1038 HB 3-1_123 34 38 54 9 BE BE – – R32 T38 500 500 7803-3591-01 7304-3591-01 74 L 3-1_123b 34 45 54 9 BE – T45 500 7305-3591-01 74 L Atlas Copco COP 1038 HD/1238 34 38 3-1_124 54 9 TU TU TU – – – R32 R38 T38 485 485 485 7803-3590-03 7804-3590-03 7304-3590-03 74 L Atlas Copco COP 1038 HL 34 38 3-1_125 54 9 BE,PD BE,PD – – R32 T38 575 575 7803-3593-01 7304-3593-01 74 L 3-1_125b 34 45 BE,PD 54 9 – T45 575 7305-3593-01 74 L TOP HAMMER DRILLING TOOLS • 77 Shank adapters Atlas Copco Dimensions, mm Hammer categoty Flushing tube Thread L Part No. Atlas Copco COP 1238 3-1_123 34 38 54 9 74 L BE BE TU TU – – – – R32 T38 R38 T38 500 500 485 485 7803-3591-01 7304-3591-01 7804-3590-03 7304-3590-03 3-1_123b 34 45 BE 54 9 – T45 500 7305-3591-01 74 L 34 38 3-1_173b 54 9 BE,PD BE,PD BE,PD – – – R32 T35 T38 575 575 575 7803-3593-01 7307-3593-01 7304-3593-01 74 L 45 3-1_174b 34 54 9 BE,PD BE,PD – – T38 T45 575 575 7304-3550-01 7305-3593-01 74 L Atlas Copco COP 1432, COP 1532, COP1440, COP1838 HD/ME 38 3-1_127 54 9 TU TU TU TU – – – – R38 T35 T38 R32 435 435 435 435 7804-3652-01 7307-3652-01 7304-3652-01 7803-3652-01 84.5 L 3-1_127A 38 54 9 BO BE BO – – R32 T35 T38 525 525 525 7803-3656-01 7307-3656-01 7304-3656-01 84.5 L Atlas Copco COP 1432 Female 3-1_204A 55 TU TU 54 9 – – R38 R32 341 341 7804-3670-02 7803-3670-02 84.5 L 78 • TOP HAMMER DRILLING TOOLS Shank adapters Atlas Copco and Boart Dimensions, mm Hammer category Flushing tube Thread L Part No. Atlas Copco COP 1550, COP 1838 ME/ HE 52 3-1_171 54 9 BE,PD BE,PD BE,PD – – – T38 T45 T51 525 525 525 7304-3655-01 7305-3655-01 7306-3655-02 84.5 L Atlas Copco COP 1550 EX, COP 1838 EX 59.8 BE BE 3-1_240 – – 53.9 8.8 T38 T45 730 730 7304-3825-02 7305-3826-02 94 L Atlas Copco COP 1840 HE, COP 1850 52 3-1_205 BE,PD BE,PD 54 10 – – T45 T51 565 565 7305-3690-02 7306-3690-03 125 L Atlas Copco COP 2150 PG BE 51.9 3-1_241 – 53.4 8.8 T51 770 7306-3692-01 124.5 L Atlas Copco COP 4050 EX 70 3-1_203 PD 68 – ST68 805 7329-3716-01 136 L 11.2 Atlas Copco COP 4050 MUX 90 PD 3-1_249 – ST68 835 7329-3720-01 67.95 112 L 11.3 Boart HD 125, HD 150, HD 160 38.1 45 3-1_67 66.1 TU TU – – R38 T38 495 495 7804-4993-01 7304-4993-01 64 L 15.0 TOP HAMMER DRILLING TOOLS • 79 Shank adapters Furukawa Dimensions, mm Hammer category Flushing tube Thread L Part No. Furukawa M 120 and PD 200 44.5 44.3 3-1_43 55.5 18.2 64 BE BE BE BE 14 14 14 14 R32 R38 T38 T38 330 350 380 446 7803-7500-61 7804-7500-60 7304-7543-60 7304-7500-60 L Furukawa PD 200R 44.2 44 3-1_139 BE 71 21 14 T38 484 7304-7581-60 69 L Furukawa HD 260, HD 300 44.3 45 3-1_104 64.4 BE BE 16 16 T38 T45 655 655 7304-7526-80 7305-7526-80 79 L 13.6 Furukawa HD 609 35.7 44.8 3-1_182 56.9 9.9 BE BE BE – – – T38 T38 T45 620 690 620 7304-4791-01 7304-4780-01 7305-4791-01 75 L Furukawa HD 612 41.7 50.8 3-1_182b BE 64.9 11.75 – T45 710 7305-7414-01 89 L Furukawa HD 709 BE 44.9 3-1_244 – 83 T38 620 7304-7426-01 93 10 L Furukawa HD 712 BE 50.8 3-1_243 – T45 788 7305-7417-01 71.8 12.3 99.5 L 80 • TOP HAMMER DRILLING TOOLS Shank adapters Gardner-Denver, Ingersoll-Rand and Klemm Dimensions, mm Hammer category Flushing tube Thread L Part No. Gardner-Denver PR 123 44.5 44.3 3-1_43 55.5 18.2 TU,BE TU,BE TU,BE TU,BE 14 14 14 14 R32 R38 T38 T38 330 350 446 380 7803-7500-61 7804-7500-60 7304-7500-60 7304-7543-60 64 L Ingersoll-Rand URD 475, URD 550, VL120, EVL 130, VL140 and F16 44.5 44.3 3-1_43 55.5 18.2 BE BE BE BE 14 14 14 14 R32 R38 T38 T38 330 350 380 446 7803-7500-61 7804-7500-60 7304-7543-60 7304-7500-60 64 L Ingersoll-Rand YH 65, YH 80 3-1_135 BE BE 64.3 19 19 T38 T45 495 500 7304-7525-19 7305-7525-19 46 45 85 L 13.5 Ingersoll-Rand YH 65 RP, YH 70 RP, YH 75 RP, YH 80 RP 46 45 3-1_138b BE 64.8 19 T45 700 7305-7546-19 119 L 13.5 Klemm 4053 56.3 3-1_214 BE BE 74 1) LH-Rotation 2) RH-Rotation – – R55 R55 500 500 7805-6015 1) 7805-7015 2) 154 L 56.5 8.5 TOP HAMMER DRILLING TOOLS • 81 Shank adapters Montabert Dimensions, mm Hammer category Flushing tube Thread L Part No. Montabert HC40 38.1 3-1_82 BE BE 52.7 8.4 – – R32 R38 447 447 7803-4725-01 7804-4725-01 58 L Montabert HC40 (female) 52.6 3-1_245 TU, BO 52.6 – R32 270 7803-4726-01 58 L 8.4 Montabert HC 80, HC 90, HC 105 38.1 3-1_71 TU TU 52.7 – – T38 T38 440 500 7304-4720-01 7304-4723-01 97 L 8.4 Montabert H 100 44.4 44.6 3-1_31 BE 14 T38 537 7304-7502-60 64.4 13.4 80 L 82 • TOP HAMMER DRILLING TOOLS Shank adapters Montabert and SIG Dimensions, mm Hammer category Flushing tube Thread L Part No. Montabert HC 120, HC 150 45 3-1_140 BE 59.7 9.4 – T45 490 7305-7520-01 95 L Montabert HC 80R, HC 120R, HC 150R 51 3-1_108 BE 59.7 – T51 670 7306-7528-02 102 L 9.4 Montabert HC 200A 60 3-1_232 73 11.4 BE BE – – T51 GT60 840 840 7306-7530-02 7600-7530-02 138 L SIG HBM 50, 100 and 120 34 45 3-1_120 BO 54 9 – R32 340 7803-3588-01 58 L SIG HBM 100 and 120 3-1_120b 34 55 TU, BO 54 9 – R38 340 7804-3575-01 58 L SIG HBM 50, 100 and 120 34 45 3-1_122 BE, DS 54 9 – R32 550 7803-3576-01 58 L SIG 101 3-1_123 34 38 54 9 BE – R32 500 7803-3591-01 74 L TOP HAMMER DRILLING TOOLS • 83 Shank adapters Sandvik Dimensions, mm Hammer category Flushing tube Thread L Part No. HL 300 32 3-1_141 BE 58.8 10 – R32 400 7803-7549-01 39 L HL 300S 45 3-1_142 BO,TU BO,TU 58.8 10 – – R28 R32 245 245 7809-7547-01 7803-7547-01 39 L HLX 3 44.85 3-1_246 BO,TU 58.75 – R32 324 7803-7662-01 53 L 7.9 HLX 3 F 44.85 3-1_247 BO,TU 58.75 – R32 205 7803-7663-01 53 L 7.9 L400, L410, L500, L510, L550 31.7 32 3-1_58 BO, PD, TU 48 20.5 10 R32 380 7803-3602-30 20 L HLR 438L and HLR 438T 38 38 3-1_55 BE, TU BE, TU 57 25.7 12.7 12.7 R32 T38 380 400 7803-4700-50 7304-4700-50 37 L HLR 438LS, 438TS, HL 538, HL538L, L550S 38 38 3-1_57 BE, PD, TU BE, PD, TU 57 BE, PD, TU BE 25.7 – – – – R32 R38 T38 T38 450 450 455 545 7803-4700-01 7804-4700-01 7304-4700-01 7304-4706-01 37 L -38 = For 38 mm front head, S=For underground drilling 84 • TOP HAMMER DRILLING TOOLS Shank adapters Sandvik Dimensions, mm Hammer category Flushing tube Thread L Part No. HL 500-38 / 510-38 38 3-1_131 58.8 10 BE BE BE – – – R32 T35 T38 550 550 550 7803-7535-02 7307-7535-02 7304-7535-02 49 L HL 500-45 / 510-45 58.8 10 49 45 L BE BE BE BE – – – – R32 T35 T38 T45 550 550 550 550 7803-7557-01 7307-7557-01 7304-7557-01 7305-7557-01 HL 500 S-38 / 510 S-38 / 510 B / 510 LH 38 3-1_144 3-1_168 58.8 10 49 L PD,TU PD,TU PD,TU PD,TU PD,TU – – – – – R32 R38 T38 R38 T38 460 460 460 500 500 7803-7531-01 7804-7531-01 7304-7531-01 7804-7536-01 7304-7536-01 HL 500 F / 510 F 45 3-1_183 BO 58.8 10 – R32 350 7803-7553-01 58 L HL 550 SUPER / 560 SUPER / 510 S-45 45 3-1_184 58.8 10 PD,TU TU TU – – – T35 R38 T38 550 500 500 7307-7557-01 7804-7554-01 7304-7554-01 49 L HLX 5 / HLX 5T 45 3-1_212 49 L TU TU 58.7 TU TU BE 7.9 BE BE BE – – – – – – – – R32 T35 T38 R38 R32 T35 T38 T45 500 500 500 500 575 575 575 575 7803-7585-01 7307-7585-01 7304-7585-01 7804-7585-01 7803-7586-01 7307-7586-01 7304-7586-01 7305-7586-01 HLX5 PE-45 45 3-1_248 TU TU 58.7 9.9 – – R32 T38 575 575 7803-7664-01 7304-7664-01 126 L -38, -45 = For 38 or 45 mm front head, S=For underground drilling TOP HAMMER DRILLING TOOLS • 85 Shank adapters Sandvik Dimensions, mm Hammer category Flushing tube Thread L Part No. HL 600-45 / 600 S-45 39.8 45 3-1_132 60 10 75 L BE BE Tubes, BE TU,PD TU,PD – – – – – R32 T38 T45 T38 T45 600 600 600 525 525 7803-7532-01 7304-7532-01 7305-7532-01 7304-7537-01 7305-7537-01 HL 600-52 39.8 3-1_172 BE BE 60 10 – – T45 T51 650 650 7305-7551-01 7306-7551-02 75 52 L HL 645 43.8 3-1_109 45 BE BE 59 – – T38 T45 600 600 7304-7541-02 7305-7541-02 68 L HL 650-45 / 700-45 / 700T-45 / 710-45 / 800T-45 45 69 3-1_196 BE BE – – T38 T45 600 600 7304-7576-01 7305-7576-01 95 L 12.9 HL 650-52, 700-52 / PE-52 / S-52, 710-52 / S-52 / PE-52 / SPE-52, 800T-52 / PE-52 52 69 3-1_196B BE,PD BE BE – – – T38 T45 T51 600 600 600 7304-7577-02 7305-7577-02 7306-7577-03 95 L 12.9 HL 850S 47.4 52 3-1_111 BE, PD 69 14 – T45 670 7305-7400-01 80 L -45, -52 = For 45 or 52 mm front head, PE= For Power Extractor rock drill (reverse hammering), S=For underground drilling 86 • TOP HAMMER DRILLING TOOLS Shank adapters Sandvik Dimensions, mm Hammer category Flushing tube Thread Part No. L HL 1000-52 / 1000 S-52 52 3-1_133 79 BE BE PD PD – – T45 T51 T45 T51 670 670 590 590 7305-6010-01 7306-6010-02 7305-6008-01 7306-6008-01 75 L 14 HL 1000-60 3-1_133B 60 BE BE 79 – – T51 GT60 670 670 7306-6014-02 7600-6014-02 75 L 14 HL 1000-80, Shoulder drive BE 3-1_166 – GT60 670 7600-6031-01 79 75 80 L 14 HL 1000 S-80 Tube drilling 3-1_166 PD PD 79 – – ST58 ST68 635 640 7328-6009-02 7329-6009-02 75 80 L 14 HL 1000 PE-52 52 3-1_186 BE 79 – T51 840 7306-6019-02* 136 L 14 * suited only for early drills with the long type of Power Extractor with 52 mm bearing diameter HL 1000 PE-65 / HL 1500 PE-65 / HL 1560 T- 65 65 79 3-1_215 BE BE – – T51 GT60 760 760 7306-6025-02 7600-6025-02 111 L 14 -52, -60, -65, -80 = For 52, 60, 65 or 80 mm front head, PE= For Power Extractor rock drill (reverse hammering), S=For underground drilling TOP HAMMER DRILLING TOOLS • 87 Shank adapters Sandvik Dimensions, mm Hammer category Flushing tube Thread Part No. L HL 1500-52 / 1500 T-52 52 3-1_194 BE 79 – T51 710 7306-6021-02 111.5 L 14 HL 1500-60 / 1500 T-60 60 3-1_194B BE BE 79 – – T51 GT60 760 760 7306-6022-02 7600-6022-03 111.5 L 14 HL 1500 T-80, Shoulder drive 80 3-1_199 BE – GT60 760 7600-6030-01 79 111.5 L 14 HL 1500 S-80 Tube drilling 80 3-1_199 PD PD 79 – – ST58 ST68 635 635 7328-6020-01 7329-6020-01 111.5 L 14 HL 1500 SPE-90 Tube drilling 90 79 111 3-1_215b PD PD – – ST58 ST68 635 635 7328-6035-01 7329-6035-01 L 14 -52, -60, -65, -80, -90 = For 52, 60, 65, 80 and 90 mm front head, PE= For Power Extractor rock drill, S=For underground drilling, T= Drill with stabilizer 88 • TOP HAMMER DRILLING TOOLS Shank adapters Secoma and Toyo Dimensions, mm Hammer category Flushing tube Thread L Part No. Secoma Hydrastar 200 3-1_130 34 45 54 9 TU,BO – R32 351 7803-4703-01 90 L Secoma Hydrastar 200, 300 and X2 34 38 3-1_40 54 9 TU TU TU – – – R32 R38 T38 485 485 485 7803-3590-03 7804-3590-03 7304-3590-03 74 L Secoma Hydrastar 350 3-1_123 34 38 54 9 BE TU BE – – – R32 R38 T38 500 485 500 7803-3591-01 7804-3590-03 7304-3591-01 74 L Toyo PR 220 44.5 44.3 3-1_43 55.5 18.2 BE BE BE 14 14 14 R32 R38 T38 330 350 446 7803-7500-61 7804-7500-60 7304-7500-60 64 L Toyo TH 501 44.2 44.9 3-1_31b BE 64.2 13 11 T38 565 7304-7583-40 68 L TOP HAMMER DRILLING TOOLS • 89 Grinding Grinding Page Button bit grinder RG400 and RG410 ........................................93 Button bit grinder RG420P ..........................................................94 Button bit grinder RG420H .........................................................95 Button bit grinder RG420E ..........................................................96 Button bit grinder RG420P/H/E Manual....................................97 Button bit grinder RG440 ............................................................98 Button bit grinder RG460 ............................................................99 Bit blaster RG500 .......................................................................100 Cross bit grinder RG300 ............................................................101 Cross bit grinder RG320 ............................................................102 Cross bit grinder RG340 ............................................................103 Cross bit grinder RG360 ............................................................104 Integral steel grinder RG100P....................................................105 Integral steel grinder RG100H...................................................106 Integral steel grinder RG120E ...................................................107 Integral steel grinder RG140P/H...............................................108 Grinding cups ..............................................................................109 Grinding wheels ..........................................................................110 Grinding accessories .................................................................. 112 Grinding Button bit grinder RG400 and RG410 Part No. RG400 Intended for grinding all kinds of button bits (Max. button size 10 mm) Complete grinder 8-1_53b 796-5116 Technical data Air pressure .................................. Air consumption ........................... Spindle speed ............................... Flushing air pressure ................... Flushing water pressure .............. Water consumption ...................... Hose connections: Air, air hose................................... Water, water hose ........................ Dimensions: HxWxD mm .............. Weight, without package and hose Weight, with package and hose ... 6-8 bar 16-17 l/s 14000 r.p.m. Max. 6 bar Max. 6 bar 5-6 l/min 12.5 mm (1/2") ID 6.3 mm (1/4") ID 150x450x130 2.9 kg 3.5 kg Accessories optional In line oiler Tools for O-ring replacement Cooling/tank unit, complete Grinding gauge for button up to Ø 16 mm Grinding cups Recommended lubricants Air tool oil, 1 litre 797-5747-50 797-5452 797-5488-85 795-1396 See page 109 797-5870-90 RG410 Intended for grinding all kinds of button bits Complete grinder 8-1_53b 796-5100 Technical data Air pressure .................................. Air consumption ........................... Spindle speed ............................... Flushing air pressure ................... Flushing water pressure .............. Water consumption ...................... Hose connections: Air, air hose................................... Water, water hose ........................ Dimensions: HxWxD mm .............. Weight, without package and hose Weight, with package and hose ... 6-8 bar 40-55 l/s 19000 r.p.m. Max. 6 bar Max. 6 bar 5-6 l/min 12.5 mm (1/2") ID 6.3 mm (1/4") ID 150x450x130 2.9 kg 3.5 kg Accessories optional In line oiler Tools for O-ring replacement Cooling/tank unit, complete Grinding gauge for button up to Ø 16 mm Grinding cups Recommended lubricants Air tool oil, 1 litre 797-5747-50 797-5452 797-5488-85 795-1396 See page 109 797-5870-90 TOP HAMMER DRILLING TOOLS • 93 Grinding Button bit grinder RG420P Part No. RG420P Intended for grinding all kinds of button bit. It is capable of handling threaded and tapered button bits upp to Ø 127 mm and DTH button bits up to Ø 250 mm (max. shank Ø 130 mm). Pneumatic grinder without cooling unit Pneumatic grinder with cooling unit Accessories optional Bit holder insert for retrac-bits compl. Guard cover 797-5510-06 Arm-locking mechanism, complete Pneumatic bit-locking system, complete Bit holder for large drill bits, complete Cooling/Flushing tank unit, complete, 10 l Mounting bracket (for drill rig) Air pressure reducing valve (max.28/min.7 bar) Assembly tools for O-ring replacement Grinding gauge for button up to Ø 16 mm Grease gun Grinding cups 796-6205 796-6206 797-5502-50 797-5510-30 797-5510-40 797-5510-20 797-5488-75 797-5510-05 797-5910-28 797-5452 795-1396 797-5870-20 See page 109 8-1_900 Complete grinding head Recommended lubricants Grease, 0.4 kg cartridge Gear oil, 1 liter Air tool oil, 1 liter 797-5130-10 Technical data Air pressure ................................. Air consumption ........................... Water pressure ............................ Water consumption ...................... Rated power (motor)..................... Electricity supply .......................... Coolant/flushing medium ............. Air connection, air hose ............... Water connection, water hose ..... Dimensions: HxWxD mm .............. Weight .......................................... Max. 13 bar/ Min. 6.5 bar 40-60 l/sec Max. 8 bar/ Min. 4 bar 2-4 l/min * 1.7 kW 24V DC, 5A Water 20 mm (3/4") ID 9.5 mm (3/8") ID 730x350x300 43.5 kg 797-5773-20 797-5870-10 797-5870-90 * With cooling tank unit 0,2-0,3 l/min. 94 • TOP HAMMER DRILLING TOOLS Grinding Button bit grinder RG420H Part No. RG420H Intended for grinding all kinds of button bit. It is capable of handling threaded and cone-type button bits upp to Ø 127 mm and DTH button bits up to Ø 250 mm (max. shank Ø 130 mm). Hydraulic grinder without cooling unit Hydraulic grinder with cooling unit Accessories optional Bit holder insert for retrac-bits compl. Guard cover Arm-locking mechanism, complete Pneumatic bit-clamping device, complete Bit holder for large drill bits, complete Cooling/Flushing tank unit, complete, 10 l Mounting bracket (for drill rig) Air pressure reducing valve (max.28/min.7 bar) Assembly tools for O-ring replacement Grinding gauge for button up to Ø 16 mm Priority flow divider for fixed pumps Grease gun Grinding cups 8-1_900 796-6235 796-6236 797-5502-50 797-5510-06 797-5510-30 797-5510-40 797-5510-20 797-5488-75 797-5510-05 797-5910-28 797-5452 795-1396 797-5414-01 797-5870-20 See page 121 Complete grinding head Recommended lubricants Grease, 0.4 kg cartridge Gear oil, 1 liter Air tool oil, 1 liter 797-5130-10 Technical data Hydraulic pressure ...................... bar Hydraulic-oil flow consumption ... Air pressure ................................. Air consumption ........................... Water pressure ............................ Water consumption ...................... Rated power (motor)..................... Electricity supply .......................... Coolant/flushing medium ............. Hydraulic connection, hydr. hose . Air connection, air hose ............... Water connection, water hose ..... Dimensions: HxWxD mm .............. Weight .......................................... Max. 200 bar/ Min. 140 12 l/min Max. 13 bar/ Min. 4 bar 5-6 l/sec Max. 8 bar/ Min. 4 bar 2-4 l/min * 3.0 kW 24V DC, 5A Water R 3/8" female thread 9.5 mm (3/8") ID 9.5 mm (3/8") ID 730x350x300 40 kg 797-5773-20 797-5870-10 797-5870-90 * With cooling tank unit 0,2-0,7 l/min. TOP HAMMER DRILLING TOOLS • 95 Grinding Button bit grinder RG420E Part No. RG420E Intended for grinding all kinds of button bit. It is capable of handling threaded and cone-type button bits upp to Ø 127 mm and DTH button bits up to Ø 250 mm (max. shank Ø 130 mm). Electric powered grinder without cooling unit Electric powered grinder with cooling unit Electric powered grinder 220-240 V 1 phase 260 V 3 phases 380-420 V 3 phases 440 V 3 phases 550 V 3 phases 660 V 3 phases 500 V 3 phases 220-240 V 3 phases 220-290 V 380-480 V 550 V 600 V 8-1_900 796-6215-XX 796-6216-XX 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60Hz 796-62XX-50 796-62XX-51 796-62XX-52 796-62XX-55 796-62XX-56 796-62XX-57 796-62XX-58 796-62XX-59 796-62XX-60 796-62XX-61 796-62XX-65 796-62XX-66 797-5502-50 797-5510-06 797-5510-30 797-5510-40 797-5510-20 797-5488-75 797-5510-05 797-5910-28 797-5452 795-1396 797-5870-20 See page 109 797-5130-10 797-5773-20 797-5870-10 3 phases 3 phases 3 phases 3 phases Technical data Air pressure ................................. Air consumption ........................... Water pressure ............................ Water consumption ...................... Rated power (motor)..................... Coolant/flushing medium ............. Air connection, air hose ............... Water connection, water hose ..... Dimensions: HxWxD mm .............. Weight .......................................... Max. 13 bar/ Min. 4 bar 2-3 l/sec Max. 8 bar/Min. 4 bar 2-4 l/min * 1.5 kW Water 9.5 mm (3/8") ID 9.5 mm (3/8") ID 730x350x300 43 kg Accessories optional Bit holder insert for retrac-bits compl. Guard cover Arm-locking mechanism, complete Pneumatic bit-clamping device, complete Bit holder for large drill bits, complete Cooling/Flushing tank unit, complete, 10 l Mounting bracket (for drill rig) Air pressure reducing valve (max.28/min.7 bar) Assembly tools for O-ring replacement Grinding gauge for button up to Ø 16 mm Grease gun Grinding cups Complete grinding head Recommended lubricants Grease, 0.4 kg cartridge Gear oil, 1 liter * With cooling tank unit 0,2-0,3 l/min. 96 • TOP HAMMER DRILLING TOOLS Grinding Button bit grinder RG420P/H/E Manual Part No. RG420P/H/E Manual Intended for grinding all kinds of button bit. It is capable of handling threaded and cone-type button bits upp to Ø 127 mm and DTH button bits up to Ø 250 mm (max. shank Ø 130 mm). Air powered grinder without cooling unit Air powered grinder with cooling unit Hydraulic powered grinder without cooling unit Hydraulic powered grinder with cooling unit Electric powered grinder without cooling unit Electric powered grinder with cooling unit Electric powered grinder 220-240 V 1 phase 260 V 3 phases 380-420 V 3 phases 440 V 3 phases 550 V 3 phases 660 V 3 phases 500 V 3 phases 220-240 V 3 phases 8-1_105 796-6300 796-6301 796-6330 796-6331 796-6310-XX 796-6311-XX 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60Hz 796-63XX-50 796-63XX-51 796-63XX-52 796-63XX-55 796-63XX-56 796-63XX-57 796-63XX-58 796-63XX-59 796-63XX-60 796-63XX-61 796-63XX-65 796-63XX-66 220-290 V 380-480 V 550 V 600 V Technical data Manual P Manual E Air pressure ................... Max. 13 bar Min. 4 bar Air consumption ............. 40-60 l/sec Hydraulic pressure ......... Oil consumption.............. Water pressure .............. Max. 8 bar Min. 4 bar Water consumption ........ Rated power (motor)....... Air connection, hose....... Water connection, hose.. Dimensions: HxWxD mm Weight ............................... 2-4 l/min * 1.7 kW 3/4" 3/8" 730x350x300 41 kg Max. 13 bar Min. 6.5 bar Manual H Max. 13 bar Min. 4 bar 3 phases 3 phases 3 phases 3 phases 2-3 l/sec 2-3 l/sec Max. 200 bar Min. 140 bar 12 l/min Max. 8 bar Max. 8 bar Min. 4 bar Min. 4 bar 2-4 l/min * 3 kW 3/8" 3/8" 730x350x300 38 kg 2-4 l/min * 1.5 kW 3/8" 3/8" 730x350x300 41 kg Accessories optional Guard cover Arm-locking mechanism, complete Pneumatic bit-clamping device, complete Bit holder for large drill bits, complete Cooling/Flushing tank unit, complete Mounting bracket (for drill rig) Air pressure reducing valve (max.28/min.7 bar) Assembly tools for O-ring replacement Grinding gauge for button up to Ø 16 mm Grease gun Grinding cups 797-5510-06 797-5510-30 797-5510-40 797-5510-20 797-5488-75 797-5510-05 797-5910-28 797-5452 795-1396 797-5870-20 See page 109 Complete grinding head Recommended lubricants Grease, 0.4 kg cartridge Gear oil, 1 liter Air tool oil, 1 liter 797-5130-10 * With cooling tank unit 0,2-0,3 l/min. 797-5773-20 797-5870-10 797-5870-90 TOP HAMMER DRILLING TOOLS • 97 Grinding Button bit grinder RG440 Part No. RG440 Intended for grinding all kinds of button bit. It is capable of handling threaded and cone-type button bits upp to Ø 152 mm. Grinder without cooling unit Grinder with cooling unit Electric powered grinder 220-240 V 1 phase 260 V 3 phases 380-420 V 3 phases 440 V 3 phases 550 V 3 phases 660 V 3 phases 500 V 3 phases 220-240 V 3 phases 8-1_97d 796-6005-XX 796-6006-XX 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60Hz 796-6005-50 796-6005-51 796-6005-52 796-6005-55 796-6005-56 796-6005-57 796-6005-58 796-6005-59 796-6005-60 796-6005-61 796-6005-65 796-6005-66 797-5348-XX* 797-5488-75 797-5452 795-1396 797-5870-20 See page 109 797-5130-10 220-290 V 380-480 V 550 V 600 V 3 phases 3 phases 3 phases 3 phases Technical data Air pressure ................................. Air consumption ........................... Rated power (motor)..................... Water pressure ............................. Water consumption ...................... Coolant/flushing medium ............. Air connection, air hose ............... Water connection, water hose ..... Dimensions: HxWxD mm ............. Weight .......................................... Max. 13 bar/ Min. 6.5 bar 5-6 l/sec 1.5 kW Max. 8 bar/ Min. 4 bar 2-4 l/min * Water 9.5 mm (3/8") ID 9.5 mm (3/8") ID 990x670x795 95 kg Accessories optional Bit mandrels. See manual. Cooling/Flushing tank unit, complete, 10 l Assembly tools for O-ring replacement Grinding gauge for button up to Ø 16 mm Grease gun Grinding cups Complete grinding head Recommen ded lubricants Grease, 0.4 kg cartridge Gear oil, 1 liter 797-5773-20 797-5870-10 * Bit mandrel for T38 bits, 797-5348-38 is included in delivery. * With cooling tank unit 0,2-0,3 l/min. 98 • TOP HAMMER DRILLING TOOLS Grinding Button bit grinder RG460 Part No. RG460 Intended for grinding DTH bits up to Ø 280 mm. (max shank diameter 110 mm) Grinder without cooling unit Grinder with cooling unit Electric powered grinder 220-240 V 1 phase 260 V 3 phases 380-420 V 3 phases 440 V 3 phases 550 V 3 phases 660 V 3 phases 500 V 3 phases 220-240 V 3 phases 220-290 V 380-480 V 550 V 600 V 3 phases 3 phases 3 phases 3 phases 796-6105-XX 796-6106-XX 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60Hz 796-6105-50 796-6105-51 796-6105-52 796-6105-55 796-6105-56 796-6105-57 796-6105-58 796-6105-59 796-6105-60 796-6105-61 796-6105-65 796-6105-66 797-5503-60 797-5488-75 797-5452 795-1396 797-5870-20 See page 109 8-1_97e Technical data Air pressure ................................. Air consumption ........................... Rated power (motor)..................... Water pressure ............................. Water consumption ...................... Coolant/flushing medium ............. Air connection, air hose ............... Water connection, water hose ..... Dimensions: HxWxD mm ............. Weight .......................................... Max. 13 bar/ Min. 6.5 bar 5-6 l/sec 1.5 kW Max. 8 bar/ Min. 4 bar 2-4 l/min * Water 9.5 mm (3/8") ID 9.5 mm (3/8") ID 990x670x795 95 kg Accessories optional Complete bit holder for threaded bits Cooling/Flushing tank unit, complete, 10 l Assembly tools for O-ring replacement Grinding gauge for button up to Ø 16 mm Grease gun Grinding cups Complete grinding head Recommen ded lubricants Grease, 0.4 kg cartridge Gear oil, 1 liter 797-5130-10 797-5773-20 797-5870-10 * With cooling tank unit 0,2-0,3 l/min. TOP HAMMER DRILLING TOOLS • 99 Grinding Bit blaster RG500 Part No. RG500 Fully automatic bit blaster for removing of excessive steel from the bit face on all types of bits from 33 mm to 195 mm in diameter. Bit Blaster 796-9200-XX Electric power 220-240 V 1 phase 260 V 3 phases 380-420 V 3 phases 440 V 3 phases 550 V 3 phases 660 V 3 phases 500 V 3 phases 220-240 V 3 phases 220-290 V 380-415 V 550 V 600 V 3 phases 3 phases 3 phases 3 phases 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60Hz 796-9200-50 796-9200-51 796-9200-52 796-9200-55 796-9200-56 796-9200-57 796-9200-58 796-9200-59 796-9200-60 796-9200-61 796-9200-65 796-9200-66 797-5615-xx* 796-9250-xx 8-1_113 Accessories optional Bit holders for threaded bits Cyclone filter unit Technical data Air pressure ................................. Air consumption ........................... 8 mm nozzle ................................. 9,5 mm nozzle ............................... Rated power (motor)..................... Blast tank volume ......................... Dimensions: HxWxD mm ............. Weight .......................................... 5-7 bar 5 bar 6 bar 7 bar 47 l/s 57 l/s 63 l/s 67 l/s 80 l/s 93 l/s 0,3 kW 30 l /100 kg 1650(1700)x800x1010 350 kg *Note! No bit mandrels are included Technical data for cyclone filter unit Air pressure ................................. 5-7 bar Air consumption ........................... Rated power (motor)..................... Dimensions: HxWxD mm ............. Weight .......................................... 5-6 l/s 0,4 kW 1700x500x750 60 kg 100 • TOP HAMMER DRILLING TOOLS Grinding Cross bit grinder RG300 Part No. RG300 RG300 is intended for frontal grinding of cross bits up to Ø 64 mm. Grinder RG300, with pneumatic bit holder. 796-3201-XX 1) 1) The last two digits (XX) in the ordering code are used to specify the electrical equipment, see table. 260 V 380/420 V 440 V 550 V 660 V 500 V 220-240 V 220-290 V 380-415 V 550 V 600 V 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60 Hz 796-32XX-51 796-32XX-52 796-32XX-55 796-32XX-56 796-32XX-57 796-32XX-58 796-32XX-59 796-32XX-60 796-32XX-61 796-32XX-65 796-32XX-66 8-1_112 Technical data Rated power .......................... Speed 50Hz............................ Speed 60Hz ........................... Water pressure ...................... Dimensions: (HxWxD mm) ..... Weight .................................... 1.7 KW 1400 r.p.m. 1680 r.p.m. Max. 8 bar, Min. 4 bar 1250x1120x1350 190 kg Accessories included in delivery Grinding wheel dresser Protective goggles Dressing template, cross bits 126° Accessories optional Manual gauge-grinding unit Semi-automatic gauge-grinding unit, (standard Cross D) Timer for gauge-grinder, 60 sec. Pneumatic bit-holder without mandrel Foot pedal Timer, 30 sec. Spare rollers for wheel dresser Dressing template, straight (Cross D) Grinding templates Grinding wheels Mandrels Grinding wheel dresser Recommended lubricants Air tool oil, 1 litre Grease, 0.4 kg cartridge 796-1858 797-5771 797-6035-06 796-6050-50 796-2960-XX 797-6015-56 797-6020 797-5730-13 797-6015-60 796-1867 797-6035-45 See page 112 See page 110/111 See page 112 See page 112 Grinding units: Rated power .......................... 0,37 kW Stroke frequency 50Hz .......... 140 strokes/min Stroke frequency 60Hz .......... 168 strokes/min NOTE! Grinding wheels and mandrels are not included. 797-5870-90 797-5773-20 TOP HAMMER DRILLING TOOLS • 101 Grinding Cross bit grinder RG320 Part No. RG320 RG320 is intended for frontal and gauge grinding of cross bits up to Ø 64 mm. RG320 with right mounted 796-3231-XX 1) frontal and left mounted semi-automatic gauge grinding equipment with pneumatic bit holders 1) The last two digits (XX) in the ordering code are used to specify the electrical equipment, see table. 260 V 380/420 V 440 V 550 V 660 V 500 V 220-240 V 220-290 V 380-415 V 550 V 600 V 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60 Hz 796-32XX-51 796-32XX-52 796-32XX-55 796-32XX-56 796-32XX-57 796-32XX-58 796-32XX-59 796-32XX-60 796-32XX-61 796-32XX-65 796-32XX-66 8-1_114 Technical data Rated power .......................... Speed 50Hz............................ Speed 60Hz ........................... Water pressure ...................... 1.7 KW 1400 r.p.m. 1680 r.p.m. Max. 8 bar, Min. 4 bar Accessories included in delivery Grinding wheel dresser Protective goggles Dressing template, cross bits 126° Dressing template, straight Accessories optional Timer for gauge-grinder, 60 sec. Foot pedal Timer, 30 sec. Spare rollers for wheel dresser Grinding templates Grinding wheels Mandrels Grinding wheel dresser Recommended lubricants Air tool oil, 1 litre Grease, 0.4 kg cartridge 796-1858 797-5771 797-6035-06 797-6035-45 Dimensions: (HxWxD mm) 1250x1350x1350 Weight .................................... 245 kg Grinding units: Rated power .......................... 0,37 kW Stroke frequency 50Hz .......... 140 strokes/min Stroke frequency 60Hz .......... 168 strokes/min Semiautomatic gauge grinding unit (796-2960-XX): Rated power .......................... 0,45 kW Stroke frequency 50Hz .......... 93 strokes/min Stroke frequency 60Hz .......... 112 strokes/min Speed 50Hz............................ 120 r.p.m. Speed 60Hz ........................... 144 r.p.m. Weight .................................... 75 kg 797-6015-56 797-5730-13 797-6015-60 796-1867 See page 112 See page 110/111 See page 112 See page 112 797-5870-90 797-5773-20 NOTE! Grinding wheels and mandrels are not included. 102 • TOP HAMMER DRILLING TOOLS Grinding Cross bit grinder RG340 Part No. RG340 RG340 is a frontal grinding machine. Intended for frontal grinding of cross bits up to Ø 64 mm. RG340, with pneumatic bit holder 1) 796-3301-XX 1) The last two digits (XX) in the ordering code are used to specify the electrical equipment, see table. 260 V 380/420 V 440 V 550 V 660 V 500 V 220-240 V 220-290 V 380-415 V 550 V 600 V 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60 Hz 796-330X-51 796-330X-52 796-330X-55 796-330X-56 796-330X-57 796-330X-58 796-330X-59 796-330X-60 796-330X-61 796-330X-65 796-330X-66 8-1_100b Technical data Rated power .......................... Speed 50Hz............................ Speed 60Hz ........................... Water pressure ...................... Dimensions: (HxWxD mm) ..... Weight .................................... 1.7 KW 1400 r.p.m. 1680 r.p.m. Max. 8 bar/ Min. 4 bar 1250x1350x1350 210 kg Accessories included in delivery Grinding wheel dresser Protective goggles Dressing template, cross bits 126° Accessories optional Pneumatic bit-holder without mandrel Foot pedal Timer, 30 sec. Spare rollers for wheel dresser Grinding templates Grinding wheels Mandrels Grinding wheel dresser Recommended lubricants Air tool oil, 1 litre Grease, 0.4 kg cartridge 796-1858 797-5771 797-6035-06 Grinding units: Rated power .......................... 2 x 0,37 kW Stroke frequency 50Hz .......... 140 strokes/min Stroke frequency 60Hz .......... 168 strokes/min 797-6020 797-5730-13 797-6015-60 796-1867 See page 112 See page 110/111 See page 112 See page 112 NOTE! Grinding wheels and mandrels are not included. 797-5870-90 797-5773-20 TOP HAMMER DRILLING TOOLS • 103 Grinding Cross bit grinder RG360 Part No. RG360 RG360 is a frontal grinding machine. Intended for frontal grinding of X-bits up to Ø 76 mm. RG360 with pneumatic bit holder 796-3601-XX 1) 1) The last two digits (XX) in the ordering code are used to specify the electrical equipment, see table. 260 V 380/420 V 440 V 550 V 660 V 500 V 220-240 V 220-290 V 380-415 V 550 V 600 V 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60 Hz 796-360X-51 796-360X-52 796-360X-55 796-360X-56 796-360X-57 796-360X-58 796-360X-59 796-360X-60 796-360X-61 796-360X-65 796-360X-66 8-1_100b Technical data Rated power .......................... Speed 50Hz............................ Speed 60Hz ........................... Water pressure ...................... Dimensions (HxWxD mm) ...... Weight .................................... 1.7 kW 1400 r.p.m. 1680 r.p.m. max. 8 bar/ Min. 4 bar 1250x1350x1350 245 kg Accessories included in delivery Grinding wheel dresser Protective goggles Dressing template, X-bits 75° Dressing template, X-bits 105° Accessories optional Pneumatic bit-holder without mandrel Foot pedal Timer, 30 sec. Spare rollers for wheel dresser Grinding templates Grinding wheels Mandrels Grinding wheel dresser Recommended lubricants Air tool oil, 1 litre Grease, 0.4 kg cartridge 796-1858 797-5771 797-6035-07 797-6035-08 Grinding units: Rated power .......................... 2 x 0,37 kW Stroke frequency 50Hz .......... 140 strokes/min Stroke frequency 60Hz ................168 strokes/min 797-6020 797-5730-13 797-6015-60 796-1867 See page 112 See page 110/111 See page 112 See page 112 797-5870-90 797-5773-20 NOTE! Grinding wheels and mandrels are not included. 104 • TOP HAMMER DRILLING TOOLS Grinding Integral steel grinder RG100P Part No. RG100P Mobile, lightweight, pneumatic grinder. Intended for frontal and gauge grinding of chisel integral steels. Complete grinder, air powered Accessories included in delivery Grinding wheel for dry grinding Protective goggles T - hexagon wrench Accessories optional Grinding wheels: For dry grinding For wet grinding In line oiler Kit for grinding plug-hole drill steel steels Mounting bracket (for drill rig) Support for integral steels Grinding template for chisel bit Grinding template for plug-hole steels Max 8 bar/ Min. 6 bar 40-60 l/sec 1.7 kW 4900 r.p.m. 12.5 mm (1/2") ID 9.5 mm (3/8") ID 660x550x350 127x63x32 mm 16.5 kg 80 mm 110° Recommended lubricants Air tool oil, 1 litre Grease, 0,4 kg cartridge 796-5300 797-1227-15 797-5771 797-5766-06 8-1_73 Technical data Air pressure ........................... Air consumption .................... Rated power (motor).............. Idling speed ........................... Hose connections: Air, air hose............................ Air or water hose for cooling . Dimensions: HxWxD mm ....... Grinding wheel dimesions ..... Weight inclusive of grinding wheel Cutting-edge radius .............. Cutting-edge angle................ 797-1227-15 797-1227-10 797-5747-50 797-5489-50 797-5330-91 797-5330-92 795-1343 795-1336 797-5870-90 797-5773-20 W 8-1_80 D D1 d D = 127 mm W = 63 mm d = 32 mm D1 = w Grinding wheel TOP HAMMER DRILLING TOOLS • 105 Grinding Integral steel grinder RG100H Part No. RG100H Mobile, lightweight, hydraulic grinder. Intended for frontal and gauge grinding of chisel integral steel. Complete grinder, hydraulic powered Accessories included in delivery Grinding wheel for dry grinding Protective goggles T - hexagon wrench Accessories optional Grinding wheels: For dry grinding For wet grinding Kit for grinding plug hole drill steels Mounting bracket (for drill rig) Support for integral steels Grinding template for chisel bit Grinding template for plug hole steels 796-5330 797-1227-15 797-5771 797-5766-06 8-1_73C 797-1227-15 797-1227-10 797-5489-50 797-5330-91 797-5330-92 795-1343 795-1336 Technical data Hydraulic pressure ................ Oil flow consumption ............. Air pressure ........................... Air consumption .................... Rated power (motor).............. Idling speed ........................... Hose connections: Hydraulic, hydraulic hose ...... Air, air hose............................ Water, water hose ................. Dimensions: HxWxD mm ....... Grinding wheel dimensions ... Max 200 bar/ Min. 140 bar 12 l/min Max 8 bar 5-10 l/sec 4 kW 3700 r.p.m. R 3/8" female thread 9.5 mm (3/8") ID 9.5 mm (3/8") ID 600x550x350 127x63x32 mm Recommended lubricants Grease, 0.4 kg cartridge 797-5773-20 Cutting-edge radius .............. 80 mm Cutting-edge angle................ 110° W 8-1_80 D D1 d D = 127 mm W = d = 32 mm D1 = w= 50 mm 63 mm 80 mm w Grinding wheel 106 • TOP HAMMER DRILLING TOOLS Grinding Integral steel grinder RG120E Part No. RG120E Electric grinder intended for frontal and gauge grinding of chisel integral steels. Complete grinder (without water tray) 1) 796-5012-XX1) The last two digits (XX) in the ordering code are used to specify the electrical equipment, see table. 8-1_61 Technical data Air pressure ................................ Air consumption ......................... Idling speed ................................ Air motor ..................................... Hose connections: Air, air hose................................. Water, water hose ...................... Weight inclusive of grinding wheel Cutting-edge radius ................... Cutting-edge angle..................... Max 8 bar/ Min. 6 bar 20-45 l/sec 4200 r.p.m. 1.5 kW 12.5 mm (1/2") ID 9.5 mm (3/8") ID 38 kg 80 mm 110° 220-240 V 260 V 380/420 V 440 V 550 V 660 V 500 V 220-240 V 220-290 V 380-415 V 550 V 600 V 1 phase 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 3 phases 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 60 Hz 60 Hz 60 Hz 60 Hz 796-5012-50 796-5012-51 796-5012-52 796-5012-55 796-5012-56 796-5012-57 796-5012-58 796-5012-59 796-5012-60 796-5012-61 796-5012-65 796-5012-66 Accessories included in delivery Grinding wheel for dry grinding T - hexagon wrench 6 mm Protective goggles Accessories optional Grinding wheels: For dry grinding For wet grinding Water tray (plastic) Support legs (set 2 pcs) Grinding template for chisel bit 797-1252-15 797-5766-06 797-5771 W 8-1_80 D D1 d 797-1252-15 797-1252-10 797-5346 797-5347 795-1343 D = 152 mm W = 83 mm d = 63.5 mm D1 = w Grinding wheel TOP HAMMER DRILLING TOOLS • 107 Grinding Integral steel grinder RG140P/H Part No. RG140P/H RG140P and 140H are intended for frontal and gauge grinding of integral steels vith 3 or 4 inserts and threaded or tapered bits. Grinder RG140P, pneumatic powered Grinder RG140H, hydraulic powered Accessories included in delivery Grinding wheel dresser T - hexagon wrench Protective goggles Pressing template for crossbit Accessories optional Grinding wheel, dry, 132° Grinding wheel, dry, straight for gauge grinding Dressing template 4-inserts (cross bit) Dressing template 3-inserts Grinding template, cross bit Spare rollers for wheel dresser Mounting bracket (for drill rig) For Sandvik DC120 (Commando 120): Hydraulic mounting kit Recommended lubricants Air tool oil (IXP), 1 litre Grease (IXH), 0,4 kg cartridge 796-3800 796-3830 8-1_104 796-1858 797-5766-06 797-5771 797-6035-08 Technical data Sanroc IXP Sanroc IXH Max.200 bar 12 l/min – Min. 6 bar – 4.0 KW 3000 r.p.m. 250x240x395 200x28x32 200x32x32 18 kg – R 3/8" Hydraulic pressure ....................... – Min. 140 bar Oil flow consumption .................... – Air pressure .................................. Max 8 bar Air consumption ........................... 40-60 l/sec Rated power ................................. 1.7 KW Idling speed .................................. 3000 r.p.m. Dimensions: Grinder (HxWxD mm) .................... 250x285x395 Grinding wheel 132°, DxWxd mm. 200x28x32 Grinding wheel straight, DxWxd mm200x32x32 Weight ........................................... 20 kg Air hose......................................... 12.5 mm (1/2") ID Hydraulic hose .............................. – 797-1185-28 797-1101-25 797-6035-08 797-6035-23 795-1343 796-1867 797-5330-91 797-5775-20 797-5870-90 797-5773-20 NOTE! Grinding wheels and mandrels are not included. 108 • TOP HAMMER DRILLING TOOLS Grinding Grinding cups For button size Part No. Grinding cups for RG410-RG460 grinders Sancup Super, (white) For redressing super-spherical buttons 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 16 mm 18 mm 7 mm 8 mm 9 mm 10 mm 11 mm 12 mm 13 mm 14 mm 16 mm 18 mm 797-5400-07 797-5400-08 797-5400-09 797-5400-10 797-5400-11 797-5400-12 797-5400-13 797-5400-14 797-5400-16 797-5400-18 797-5295-07 797-5295-08 797-5295-09 797-5295-10 797-5295-11 797-5295-12 797-5295-13 797-5295-14 797-5295-16 797-5295-18 8-1_56 Shank Ø 9 mm. Sancup Super, (red) For redressing R-ballistic buttons 8-1_57 Shank Ø 9 mm. Grinding cups for AC: LSD, CME: VS 200/ 220GTA, Jasco and others Sancup (black) For redressing spherical buttons 7-8-9 mm 10 mm 11 mm 12-13 mm 14 mm 16 mm Shank Ø 8 mm. * For older grinder remove O-ring before use (VS 200) 797-5356-08 797-5356-10 797-5356-11 797-5356-12 797-5356-14 797-5356-16 Sancup (black) For redressing ballistic buttons 8-9 mm 10 mm 11 mm 12-13 mm 14 mm 16 mm 797-5366-09 797-5366-10 797-5366-11 797-5366-12 797-5366-14 797-5366-16 Shank Ø 8 mm. * For older grinder remove O-ring before use (VS 200) TOP HAMMER DRILLING TOOLS • 109 Grinding Grinding wheels Bit insert angle mm Wheel angle D W d Part No. Grinding wheel, wet grinding W 90° Cross bits 90° 90° 90° 75° X-bits 75° 105° 105° 33-35 38-41 43-45 48-51 64 76 64 76 132° 132° 132° 132° 126° 126° 139° 139° 300 300 300 300 300 300 300 300 23 26 29 32 35 44 48 58 32 32 32 32 32 32 32 32 797-1190-23 797-1190-26 797-1190-29 797-1190-32 797-1175-35 797-1175-44 797-1105-48 797-1105-58 D d 8-1_23 Straight wheel for gauge grinding 35-76 300 32 32 797-1100-32 D W d Part No. Grinding wheel for RG140P, RG140H (132°) W For cross bits 33-43 mm Dry Straight wheel for gauge grinding Dry 200 200 200 28 32 25 32 32 32 797-1185-28 797-1101-32 797-1101-25 D d 8-1_81 110 • TOP HAMMER DRILLING TOOLS Grinding Grinding wheels D W d D1 w Part No. Grinding wheel for RG100P, RG100H and RG120P, RG120E W 8-1_24 For RG100 For RG100 For RG120 For RG120 D 125 125 150 150 63 63 83 83 32 32 63.5 63.5 80 80 100 100 50 50 64 64 797-1227-15 797-1227-10 797-1252-15 797-1252-10 D1 d w D W d D1 w Part No. Secoroc: Junior and Senior, AC: Teroc 1500/1501 W 8-1_24 Wet 200 102 32 150 80 797-1250-10 D D1 d w TOP HAMMER DRILLING TOOLS • 111 Grinding Grinding accessories Part No. Mandrel, complete for pneumatic bit holder, also for semi-automatic gauge-grinding unit For R23 (29/32") thread For R25 (1") thread For R28 (1 1/8") thread For R32 (1 1/4") thread For α330 thread For R35 (1 3/8") thread For R38/T38 (1 1/2") thread For T45 (1 3/4") thread Wheel dresser, complete - Shaft (1 pcs) 1) - Bearing bushing (2 pcs) 1) - Screw (6 pcs) 1) - Cover (2 pcs) 1) - 1 set of dresser rollers 1) 797-6020-23 797-6020-25 797-6020-28 797-6020-32 797-6020-33 797-6020-35 797-6020-38 797-6020-45 796-1858 8-1_103 Wheel dresser 796-1862 796-1863 796-1865 796-1866 796-1867 8-1_37 1) Included in a complete unit. For plug hole drill steels type 721-XXXX and 722-XXXX 795-1336 For integrals with cross bit / For cross and X-bits with diameter up to 115 mm / For integrals with chisel bit and motor drill steels 3 mm Radius 80 mm 2 mm eel Wh Max height of antitaper Bits Integrals 0 8-1_89 10 Carbide insert 110 For buttons up to 16 mm 795-1396 For OD-bits 795-1340 Pneumatic bit-holder, complete without mandrel for Sandvik RG300/320/340/360 grinders 797-6020 8-1 99 112 • TOP HAMMER DRILLING TOOLS Whe 80 70 60 50 40 30 20 10 0 el Wh eel 795-1343 Auxiliary tools Auxiliary tools Page Bit adapters ................................................................................. 115 Reduction couplings ................................................................... 115 Wrenches and knock-off-tools .................................................. 116 Fishing tools, thread grease and gauges .................................... 117 Drill steel straightener................................................................ 118 Auxiliary tools Bit adapters 2-1_158b F D L M Wrench flat mm 28.5 38 38 38 38 38 44.5 44.5 44.5 44.5 44.5 38 44.5 44.5 Threads F R23 R25 R28 R32 R32 T35 R38 R38 T38 T38 T38 T45 T45 T51 M R32 R32 R32 T38 R38 T38 R32 T38 R32 T45 R38 T38 T51 T45 Dimensions L mm ft 200 173 230 225 225 250 270 245 270 285 280 265 285 285 - Part No. in 7 7/8” 6 13/16” 9 1/16” 8 55/64” 8 55/64” 9 27/32” 10 41/64” 9 21/32” 10 41/64” 11 7/32" 11 1/32” 10 7/16" 11 7/32" 11 7/32" D mm 35 45 40 45 45 48 55 55 57 57 57 63 63 71 in 1 3/8” 1 3/4” 1 37/64” 1 49/64” 1 49/64” 1 7/8” 2 5/32” 2 5/32” 2 1/4" 2 1/4" 2 1/4” 2 31/64" 2 31/64" 2 51/64" 7837-3301 7832-3301 7839-3301 7833-4401 7833-4301 7337-4401 7834-3303 7834-4401 7334-3301 7334-5401 7334-4301 7335-4401 7335-6401 7336-5401 Reduction couplings 2-1_293b D F1 L F2 Threads F1 R32 R32 R38 T38 T38 T38 T51 F2 R28 R25 R32 R32 R38 T45 T45 Dimensions L mm ft 165 160 170 195 185 220 218 - Part No. in 6 1/2” 6 1/4” 6 3/4” 7 11/16” 7 9/32” 8 43/64” 8 19/32” D mm 44 43 55 55 55 61 71 in 1 47/64” 1 11/16” 2 5/32” 2 5/32” 2 5/32” 2 13/32” 2 51/64” 7993-0444 7993-2443 7994-3455 7314-3555 7314-4455 7314-6261 7316-6271 TOP HAMMER DRILLING TOOLS • 115 Auxiliary tools Wrenches and knock-off-tools Dimensions L mm ft Part No. in D mm in For integral drill steels and shank rods 8-1_15 Hex 19 Hex 22 Hex 28 600 600 600 1' 1' 1' 11 5/8" 11 5/8" 11 5/8" 19 22 28 3/4" 7/8" 1 1/8" 795-1407 795-1408 795-2423 D L For extension rods D 4-1_33 Hex 25, Round 32 Hex 28 Hex 32, Round 39 Round 46 DTH Hex 35 Round 52 4-1_34 300 300 370 370 380 620 850 – – 1' 1' 1' 2' 2' 11 13/16" 11 13/16" 2 9/16" 2 9/16" 2 31/32” 13/32" 9 15/32" 25 28 32 38 65 35 45 1" 1 1/8" 1 1/4" 1 1/2" 2 7/12” 1 25/64" 1 3/4" 795-1431 795-1492 795-1432 795-1494 795-1495 795-2476 795-1420 L D L Knock-off-tools for Hex 22 and Hex 25 pilot rods, type 7922-XXXX-XX 795-1469 Knock-off-tools for tapered bits 2-1_485 2-1_114 Hex 22 Hex 25 795-1467 795-1468 Pneumatic knock-off-tool for tapered bits Complete unit Chisel (wear part) Guide sleeve 796-1400 797-5712-01 797-5114-03 Technical data Air pressure ............................... Air consumption ........................ Air hose ..................................... Dimensions: (HxWxD mm) ......... Weight ....................................... 6-8 bar 7-9 l/s 12.5 mm (1/2") ID 500x300x120 18 kg 8-1_111 116 • TOP HAMMER DRILLING TOOLS Auxiliary tools Fishing tools, thread grease and gauges Dimensions D D1 L Thread Part No. Fishing sleeve For catching R22 Hex. rods 33 R22 coupling sleeves 35 R25 Hex. rods 39 R25 coupling sleeves 38 R28 Hex. rods/coupling sleeves 48 R32 round/Hex. rods/coupling sleeves 48 R38 round rods/coupling sleeves 60 T35 round rods/coupling sleeves 52 T38 round rods/coupling sleeves/MF-rods 60 T45 round rods/coupling sleeves/MF-rods 71 T51 round rods/coupling sleeves/MF-rods 80 GT60 rods 92 GT60 rods 89 ST68 tubes Ø87 102 D 8-1_17 L – – – – 42.5 46 – 50 57.2 68 75.5 87.5 84.5 92 185 225 215 275 335 300 353 284 353 393 440 450 450 410 R22 R22 R25 R25 R28 R32 R38 T35 T38 T45 T51 GT60 GT60 ST68 795-1629 795-1630 795-1631 795-1632 795-1687 795-1604 795-1605 795-1613 795-1607 795-1608 795-1609 795-2601 795-2603 795-1696 Fishing pike 8-1_18 D D1 L For catching R22 rods 1) R25 rods 1) R28 rods 1) R32 rods 1) R38 rods 2) T38 rods 2) T45 rods 2) T51 rods 2) ST58 tubes Ø76 2) ST68 tubes Ø87 2) 10 12 14.8 19.4 18 19.4 25 27 57 71 4 4 4 4 8 8 8 15 24 32 160 200 220 280 237 237 275 285 500 541 R22 R25 R28 R32 R38 T38 T45 T51 ST58 ST68 795-1600 795-1601 795-1686 795-1606 795-1611 795-1676 795-1681 795-1690 795-1699 795-2600 1) Without flushing hole. 2) With flushing hole. Thread grease Can 4.5 kg Can 18.0 kg Tube 0.40 kg Low temperature grease, can 18.0 kg Barrel 50 kg Barrel 240 kg 215 300 53/57 300 370 610 – – – – – – 170 380 235 380 690 870 – – – – – – 795-1960 795-1961 795-1962 795-1963 795-1967 795-1964 8-1_19 Gauges / Wear gauge for male and female threads 795-1336 8-1_7 Gauges / Chuck wear gauge 795-1343 8-1_44 TOP HAMMER DRILLING TOOLS • 117 Auxiliary tools Drill steel straightener Part No. Drill steel straightener for Hex19 to Round 52 Manual/Hydraulic Electric/Hydraulic, 380V/50Hz Support leg, 1 piece 796-2930 796-2930-52 796-2931 8-1_ 90 118 • TOP HAMMER DRILLING TOOLS Code information Small hole drilling tools Third figure group Integral steels with reduced width of bit (small gauge steel) ................................................................................................... xxx-xxxx-50 Integral steels with reduced width of bit, + tolerance (small gauge steel) ................................................................................ xxx-xxxx-5005 Integral steels, Premium plus, H22, insert height 19 mm ....................................................................................................... xxx-xxxx-65 Shank rod, drilled for flushing tube 4.5-5 mm, packing .......................................................................................................... xxxx-xxxx-13 Shank rod, drilled for flushing tube < 7 mm, no packing ......................................................................................................... xxxx-xxxx-11 Tapered rod, drilled for flushing tube < 7 mm, carburized ...................................................................................................... xxxx-6xxx-11 Tapered rod, drilled for flushing tube < 7 mm, HF- hardened ................................................................................................. xxxx-11xx-11 Cross bit, cemented carbide grade 42 .................................................................................................................................. xxxx-xxxx-42 Tapered button bits, cemented carbide grade XT48 with ballistic buttons ............................................................................... xxxx-xxxx-B48 Bench drilling tools Third figure group Insert bits, cemented carbide grade 11 .................................................................................................................................. xxxx-xxxx-11 Insert bits, cemented carbide grade 42.................................................................................................................................. xxxx-xxxx-42 Button bits, cemented carbide grade MP 45, with spherical buttons ....................................................................................... Button bits, cemented carbide grade MP 45, with ballistic buttons.......................................................................................... Button bits, cemented carbide grade DP 65, with spherical buttons ....................................................................................... Button bits, cemented carbide grade DP 55, with ballistic buttons ......................................................................................... Button bits, cemented carbide grade MP 45, with ballistic buttons ......................................................................................... xxxx-xxxx-S45 xxxx-xxxx-R45 xxxx-xxxx-S65 xxxx-xxxx-R55 xxxx-xxxx-R45 Extension rod, Guide tube, carburized ................................................................................................................................... xxxx-xxxx-20 Extension rod, HF- hardened ................................................................................................................................................ xxxx-xxxx-30 MF-rod, for surface drilling.................................................................................................................................................... xxxx-xxxx-70 Drifting and tunneling tools Third figure group Cross bits, cemented carbide grade 42 ................................................................................................................................ xxxx-xxxx-42 Button bits, cemented carbide grade XT48 with spherical buttons .......................................................................................... Button bits, cemented carbide grade XT48 with ballistic buttons ............................................................................................. Button bits, cemented carbide grade DP 65 with spherical buttons ......................................................................................... Button bits, one extra hole for side flushing............................................................................................................................ xxxx-xxxx-S48 xxxx-xxxx-R48 xxxx-xxxx-S65 xxxx-xxxxA-xxx Rods, carburized................................................................................................................................................................... xxxx-xxxx-20 TOP HAMMER DRILLING TOOLS • 119 Code information Tools for long hole drilling underground Third figure group Insert bits, cemented carbide grade 11 .................................................................................................................................. xxxx-xxxx-11 Insert bits, cemented carbide grade 42.................................................................................................................................. xxxx-xxxx-42 Button bits, cemented carbide grade MP 45, with spherical buttons ....................................................................................... Button bits, cemented carbide grade MP 45, with ballistic buttons.......................................................................................... Button bits, cemented carbide grade DP 65, with spherical buttons ....................................................................................... Button bits, cemented carbide grade DP 65, with semi-ballistic buttons ................................................................................. Button bits, cemented carbide grade MP 45, with semi-ballistic buttons ................................................................................ xxxx-xxxx-S45 xxxx-xxxx-B45 xxxx-xxxx-S65 xxxx-xxxx-R65 xxxx-xxxx-R45 Extension rod, carburized ..................................................................................................................................................... xxxx-xxxx-20 Drill tube, carburized ............................................................................................................................................................ xxxx-xxxx-26 Drill tube, carburized, with permanent back flow valve ........................................................................................................... xxxx-xxxx-46 MF-rod, carburized .............................................................................................................................................................. xxxx-xxxx-20 Bit classification code H M S C F V A N Very hard to hard rock Medium hard rock Soft rock _ > 2500 bar (250 MPa) 1500-2500 bar (150-250 MPa) < 1500 bar (150 MPa) Homogeneous (competent) rock Fissured rock Very abrasive rock Abrasive rock Non-abrasive rock > 40% silica 20-40% silica _ 0-20% silica 120 • TOP HAMMER DRILLING TOOLS Safety information Grinding of Cemented Carbide Grinding or heating a cemented carbide product will produce dust or fumes of hazardous ingredients which can be inhaled, swallowed or come in contact with the skin or eyes. The limiting ingredient in cemented carbide is, from a health and safety point of view, Cobalt. Another hazardous ingredient is Tungsten Carbide. Cobalt is classified as harmful - may cause sensitization by inhalation or skin contact. Inhalation or skin contact may also cause irritation. Sensitive persons may experience an allergic reaction. Repeated inhalation of aerosols containing Cobalt may cause obstruction in the respiratory organs. Long term inhalation of increased concentrations may cause permanent disease. Precautions - Avoid formation and inhalation of dust. - Wet grinding is recommended instead of dry grinding. - Always use Exhaust Ventilation which is adequate to limit personal exposure well below the Occupational Exposure Limits. - Use Respiratory Protection if ventilation is not available or adequate. - Use Safety Goggles when necessary - Wear suitable Gloves and Protective Clothing. TOP HAMMER DRILLING TOOLS • 121 Numerical index with weight table Part No. Weight (kg) 1,80 2,40 2,50 3,00 3,00 3,00 3,00 4,20 4,20 4,20 5,40 5,40 5,40 5,40 6,00 6,00 6,60 6,60 7,90 7,90 7,90 10,30 10,20 12,70 12,70 15,20 15,10 17,60 17,60 20,10 20,10 22,50 22,50 24,70 27,00 29,50 0,60 0,70 0,70 0,80 0,78 0,80 0,90 1,00 1,30 1,30 1,70 2,10 2,20 2,20 3,00 3,90 5,65 1,40 1,40 2,30 5,40 4,10 4,20 4,70 3,80 6,35 4,45 Package size (pcs) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 30 Page Part No. Weight (kg) 9,90 3,00 2,75 4,00 3,30 4,70 3,80 4,10 6,35 6,00 5,50 6,25 3,90 5,40 5,40 6,30 3,90 5,90 4,60 4,30 5,50 6,55 3,60 5,30 5,60 6,90 8,40 5,20 5,80 5,45 5,90 5,10 5,80 6,10 6,90 10,25 6,25 8,90 9,70 9,10 8,85 9,50 5,60 5,50 6,60 6,30 5,80 6,90 7,80 7,60 5,90 7,20 8,60 6,20 6,80 7,20 9,50 9,30 10,10 11,90 13,90 11,20 13,30 15,90 8,60 Package size (pcs) Page 714-0434-65 714-0635-65 714-0641-65 714-0829 714-0833-65 714-0834-65 714-0840-65 714-1232-65 714-1234-65 714-1240-65 714-1628-50 714-1631 714-1633-65 714-1639-65 714-1833-65 714-1839-65 714-2030 714-2033-65 714-2427-50 714-2432-65 714-2438-65 714-3231 714-3237-65 714-4030 714-4036-65 714-4829 714-4835-65 714-5628-50 714-5634-65 714-6427-50 714-6433-65 714-7226-50 714-7232-65 714-8026-50 714-8825-5005 714-9625-5005 721-1517 721-1620 721-1622 721-1922 721-2020 721-2420 721-2820 721-3120 724-0424 724-0429 724-0627 724-0823 724-0828 724-0834 724-1226 724-1627 724-2426 728-0424 728-0429 728-0828 7304-3550-01 7304-3590-03 7304-3591-01 7304-3593-01 7304-3652-01 7304-3655-01 7304-3656-01 122 • 30 5 5 5 5 5 5 5 20 20 20 20 20 20 20 20 20 20 1 1 1 1 2 1 2 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 78 77-78, 89 77-78, 89 77-78 78 79 78 7304-3825-02 7304-4200-30 7304-4500-60 7304-4700-01 7304-4700-50 7304-4706-01 7304-4720-01 7304-4723-01 7304-4780-01 7304-4791-01 7304-4993-01 7304-7426-01 7304-7500-60 7304-7502-60 7304-7525-19 7304-7526-80 7304-7531-01 7304-7532-01 7304-7535-02 7304-7536-01 7304-7537-01 7304-7541-02 7304-7543-60 7304-7554-01 7304-7557-01 7304-7576-01 7304-7577-02 7304-7581-60 7304-7583-40 7304-7585-01 7304-7586-01 7305-3591-01 7305-3593-01 7305-3655-01 7305-3690-02 7305-3826-02 7305-4791-01 7305-6008-01 7305-6010-01 7305-7400-01 7305-7414-01 7305-7417-01 7305-7520-01 7305-7525-19 7305-7526-80 7305-7532-01 7305-7537-01 7305-7541-02 7305-7546-19 7305-7551-01 7305-7557-01 7305-7576-01 7305-7577-02 7305-7586-01 7306-3655-02 7306-3690-03 7306-3692-01 7306-6008-01 7306-6010-02 7306-6014-02 7306-6019-02 7306-6021-02 7306-6022-02 7306-6025-02 7306-7528-02 2 2 2 2 1 2 2 2 2 1 1 1 2 1 1 1 2 1 1 1 1 1 1 1 1 79 76 76 84 84 84 82 82 80 80 79 80 80-81, 89 76, 82 81 80 85 86 85 85 86 86 80-81 85 85 86 86 80 89 85 85 77-78 77-78 79 79 79 80 87 87 86 80 80 83 81 80 86 86 86 81 86 85 86 86 85 79 79 79 87 87 87 87 88 88 87 83 1 1 1 1 1 1 1 1 1 1 1 1 TOP HAMMER DRILLING TOOLS Numerical index with weight table Part No. Weight (kg) 16,10 8,10 4,50 3,70 4,15 4,45 5,55 5,25 5,60 2,30 1,50 1,90 2,85 3,65 4,00 25,00 29,40 33,80 39,20 44,00 27,80 33,20 38,60 44,00 48,00 57,00 24,10 10,60 13,30 16,10 25,50 30,00 36,40 29,25 34,00 18,30 35,00 39,90 44,80 33,70 37,10 42,00 46,10 25,50 27,50 24,00 27,50 32,00 37,00 42,20 44,00 32,90 40,00 47,00 66,50 17,60 21,00 35,00 41,20 47,50 Package size (pcs) Page Part No. Weight (kg) 50,00 56,00 85,00 23,00 27,00 50,50 56,50 87,00 16,10 25,40 32,00 35,00 35,00 40,10 45,00 50,00 17,40 17,30 22,00 21,70 26,60 16,90 16,80 22,35 2,60 3,35 3,30 2,90 3,70 3,80 1,90 33,20 41,00 40,00 40,00 47,00 1,70 1,70 1,85 2,30 2,30 3,00 1,70 1,70 2,20 2,20 2,05 2,60 1,65 1,65 2,30 2,30 2,00 1,95 2,40 2,90 3,00 Package size (pcs) 10 5 7 10 10 10 10 10 5 Page 7306-7530-02 7306-7551-02 7307-3576-01 7307-3593-01 7307-3652-01 7307-3656-01 7307-7535-02 7307-7557-01 7307-7585-01 7307-7586-01 7314-3555 7314-3652 7314-4455 7314-6261 7316-3671 7316-6271 7324-4131-20 7324-4137-20 7324-4143-20 7324-4149-20 7324-4155-20 7324-4231-20 7324-4237-20 7324-4243-20 7324-4249-20 7324-4255-20 7324-4261-20 7324-4331C-30 7324-4712C-20 7324-4715C-20 7324-4718C-20 7324-4731-70 7324-4737-70 7324-4743-70 7324-6537-20 7324-6543-20 7324-6931-20 7324-7243-20 7324-7249-20 7324-7255-20 7324-8543-20 7324-8549-20 7324-8555-20 7324-8561-20 7324-8637-20 7324-8643-20 7324-9631-20 7324-9637-20 7324-9643-20 7324-9649-20 7324-9655-20 7324-9661-20 7325-7331C-30 7325-7337C-30 7325-7343C-30 7325-7361C-30 7325-7715C-20 7325-7718C-20 7325-7731-70 7325-7737-70 7325-7743-70 83 86 76 78 78 78 85 85 85 85 115 25, 29 115 115 45 115 27 27 27 27 27 27 27 27 27 27 27 40 55 55 55 39 39 39 25 25 40 29 29 29 29 29 29 29 25 25 25 25 25 25 25 25 43 43 43 43 57 57 42 42 42 2 7326-5337C-30 7326-5343C-30 7326-5361C-30 7326-5515C-20 7326-5518C-20 7326-5537-70 7326-5543-70 7326-5561-70 7327-4718-20 7327-4731-20 7327-4737-20 7327-4743-20 7327-5243-20 7327-5249-20 7327-5255-20 7327-5261-20 7328-6009-02 7328-6020-01 7328-6035-01 7329-3716-01 7329-3720-01 7329-6009-02 7329-6020-01 7329-6035-01 7334-3301 7334-4301 7334-5401 7335-4401 7335-6401 7336-5401 7337-4401 7378-7615-26 7378-7618-26 7379-8715-26 7379-8715-46 7379-8718-26 7514-2664-R55 7514-2664-S45 7514-2670-S45 7514-2676-R55 7514-2676-S45 7514-2689-S45 7514-3864-S45 7514-3864-S65 7514-3876-S45 7514-3876-S65 7514-4064-11 7514-4076A-11 7514-5964-R55 7514-5964-S45 7514-5976-R55 7514-5976-S45 7514-7864-R55 7514-7864-S45 7514-7870-S45 7514-7876-R55 7514-7876-S45 45 45 45 59 59 45 45 45 53 31, 37 37 37 31 31 31 31 87 88 88 79 79 87 88 88 115 115 115 115 115 115 115 61 61 62 62 62 38 38 38 38 38 38 38, 54 38, 54 38 38 39 39 38, 54 38, 54 38 38 38, 54 38, 54 39, 54 39 39 • 123 5 5 1 1 1 5 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 10 10 10 5 5 5 5 5 3 5 5 5 5 5 5 5 5 3 3 5 5 5 3 3 15 15 15 15 5 15 10 10 10 10 10 10 10 5 5 10 15 10 10 10 5 10 10 5 5 10 10 TOP HAMMER DRILLING TOOLS Numerical index with weight table Part No. Weight (kg) 1,85 2,00 2,00 3,20 3,10 4,00 2,50 2,35 3,10 3,00 2,30 2,30 3,40 3,60 4,00 4,00 2,40 2,45 3,20 3,20 5,90 3,20 3,25 3,05 4,30 4,40 6,00 6,20 2,85 3,10 3,05 4,50 4,50 4,10 4,10 3,15 4,75 4,30 5,50 6,60 3,60 6,10 7,85 10,20 4,35 4,45 5,60 6,00 3,20 3,60 5,80 8,10 4,15 4,15 5,75 5,75 8,35 8,15 10,50 4,35 4,25 1,30 1,50 Package size (pcs) 5 5 5 3 1 5 5 3 3 5 5 3 3 1 1 3 3 3 3 1 3 3 3 3 3 1 1 3 3 3 3 3 3 3 3 1 1 1 3 1 1 1 1 1 1 1 3 3 1 1 3 3 1 1 1 1 1 3 3 Page Part No. Weight (kg) Package size (pcs) Page 7514-7964-R55 7514-7964-S45 7514-7964-S45 7514-7976-R55 7514-7976-S45 7515-2602-S45 7515-2676-R55 7515-2676-S45 7515-2689-R55 7515-2689-S45 7515-3876-S45 7515-3876-S65 7515-3889-S45 7515-3889-S65 7515-5902-R55 7515-5902-S45 7515-5976-R55 7515-5976-S45 7515-5989-R55 7515-5989-S45 7515-7802-S45 7515-7876-R55 7515-7876-S45 7515-7876-S65 7515-7889-R55 7515-7889-S45 7515-7902-R55 7515-7902-S45 7515-7970-R55 7515-7976-R55 7515-7976-S45 7515-7989-R55 7515-7989-S45 7515-8270-R45 7515-8270-R45 7515-8276-R45 7515-8289-R45 7516-2602-S45 7516-2615-S45 7516-2627-S45 7516-2689-S45 7516-4902-S45 7516-4915-S45 7516-4927-S45 7516-5902-R55 7516-5902-S45 7516-5915-S45 7516-5927-S45 7516-5989-R55 7516-5989-S45 7516-7802-S45 7516-7815-S45 7516-7889-R55 7516-7889-S45 7516-7902-R55 7516-7902-S45 7516-7915-R55 7516-7915-S45 7516-7927-S45 7516-7989-R55 7516-7989-S45 7517-7854-R45 7517-7857-R45 124 • 39, 54 39, 54 54 39 39 41 41 41, 56 41 41 41, 56 41, 56 41, 56 41, 56 41 41 41 41, 56 41 41, 56 42 41 41, 56 56 42 42 42 42 42 42, 56 42, 56 42 42, 56 42 56 42, 56 42 44 44 44 44, 58 44 44 44 44 44 44 44 44 44, 58 44 44 44 44, 58 44 44 44 44 44 44, 58 44, 58 37, 53 37, 53 7525-8476-R65 7528-5652C-S65 7528-8489-R65 7529-5652C-S65 7529-6652-S45 7529-6902-S65 7529-7302-R65 7529-7315-R65 7529-8402-R65 7529-8415-R65 7600-6014-02 7600-6022-03 7600-6025-02 7600-6030-01 7600-6031-01 7600-7530-02 7610-1137-70 7610-1143-70 7610-1161-70 7610-1443-70 7620-3802-S45 7620-3815-S45 7620-3827-S55 7620-3892-S45 7620-3896-S45 7620-4792-R55 7620-4902-S45 7620-4915-S45 7620-4927-S55 7620-4940-S55 7620-4952-S55 7620-5902-S45 7620-5915-R55 7620-5915-S45 7620-5927-S55 7620-5940-S55 7620-5952-S55 7620-7902-R55 7620-7902-S45 7620-7915-R55 7620-7915-S45 7620-7927-S55 7620-7940-S55 7620-7996-S45 7620-8118-S55 7620-8702-R45 7620-8792-R45 7640-7653-70 7640-8716-70 7640-8743-70 7721-4802-S45 7721-4802-S48 7721-4827-S45 7721-4827-S48 7721-4889-S45 7721-4889-S48 7722-4864-S45 7722-4876-S45 7722-4889-S45 3,40 4,00 14,80 8,90 5,20 5,65 7,50 5,20 5,90 12,95 14,55 16,70 21,00 20,80 16,90 73,00 82,00 110,00 85,00 6,00 7,25 8,85 5,15 5,30 5,60 7,25 9,50 12,60 16,70 20,00 5,95 7,30 7,50 9,45 12,10 13,75 7,00 7,10 9,40 9,40 12,70 16,15 6,20 10,05 7,50 6,05 111,50 39,30 106,00 2,05 2,05 3,50 3,50 1,45 1,45 0,85 1,25 1,70 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 5 5 1 1 1 1 1 4 4 3 3 4 4 5 5 4 60 61 61 62 62 62 62 62 62 62 87 88 87 88 87 83 47 47 47 47 46 46 46 46 46 46 47 47 47 47 47 46 46 46 46 46 46 46 46 46 46 46 46 46 47 46 46 47 47 47 26, 30 28 26, 30 28 26, 30 28 7, 20-23, 26 7, 20-23, 26 7, 22-23, 26 TOP HAMMER DRILLING TOOLS Numerical index with weight table Part No. Weight (kg) Package size (pcs) Page Part No. Weight (kg) 0,61 0,61 0,63 0,65 0,45 0,55 0,65 0,40 0,30 0,30 0,45 0,55 0,45 0,45 0,50 0,55 0,65 0,61 0,61 0,63 0,65 0,75 0,95 0,65 0,75 0,75 0,82 0,80 0,80 0,85 0,85 0,95 0,95 0,65 0,75 3,15 0,30 0,30 0,25 0,30 0,30 0,30 0,20 0,20 0,24 0,30 0,21 0,25 0,30 0,30 0,30 0,20 0,25 0,30 0,15 0,15 Package size (pcs) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Page 7723-4802-S45 7723-4827-S45 7732-1045-42 7732-1051-42 7732-1435-42 7732-1438-42 7732-1441-42 7732-5235-S48 7732-5237-S48 7732-5238-R48 7732-5238-S48 7732-5241-S48 7732-5345F-R48 7733-1064-42 7733-1345A-42 7733-1451-42 7733-2664-S45 7733-2676-S45 7733-5243-S48 7733-5245-S48 7733-5245-S65 7733-5248-S48 7733-5251-S48 7733-5251-S65 7733-5345-R48 7733-5345-S48 7733-5348-S48 7733-5351-R48 7733-5351-S48 7733-5357C-S48 7733-5443-R48 7733-5445-R48 7733-5448-R48 7733-5451-R48 7733-5602-S45 7733-7851-R55 7733-7851-S45 7733-7851-S45 7733-7864-S45 7733-8251-R45 7733-8257-R45 7737-1435-42 7737-1438-42 7737-1633-11 7737-4438A-B48 7737-5235-R48 7737-5241-R48 7737-5345-R48 7738-1448-42 7738-5248-S48 7738-5251-S48 7738-5348A-R48 7738-5348A-S48 7738-5348-R48 7738-5348-S48 7738-5351-R48 7738-5351-S48 7738-5602-S45 7738-7854-R48 7738-7854-S48 7739-1438-42 7739-1441-42 3,60 5,20 0,65 0,80 0,45 0,55 0,69 0,40 0,45 0,49 0,49 0,52 0,77 1,50 0,80 1,05 1,65 2,00 0,70 0,75 0,75 0,92 0,97 0,97 0,77 0,78 0,95 0,95 0,96 1,15 0,69 0,78 0,92 0,97 3,20 1,15 1,15 1,15 2,10 1,25 1,65 0,45 0,50 0,40 0,45 0,35 0,45 0,53 1,00 0,90 0,99 0,96 0,97 0,99 0,97 0,99 0,97 3,15 1,25 1,20 0,55 0,65 2 2 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 5 10 10 5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 5 5 10 10 52, 55 55 10, 13 13 13, 19 10, 13, 19 10, 13, 19 13, 19 19 13 13, 19 13, 19 13 35 24 35, 51 35 35 24 24 24 24 24 24 24 24 24 24, 35, 51 24, 35, 51 35, 51 24 24 24 24 26 35 35 51 35 35, 51 35, 51 12 12 12 12 12 12 12 29 29 29 29 29 29 29 29 29 30 31 31 16, 22 16, 22 7739-5238-R48 7739-5238-S48 7739-5241-S48 7739-5243-S48 7764-1435-42 7764-1438-42 7764-1441-42 7764-1633-42 7764-4433-S48 7764-4435-S48 7764-5235-R48 7764-5237-S48 7764-5238-R48 7764-5238-S48 7764-5241-S48 7765-1438-42 7765-1441-42 7765-5238-R48 7765-5238-S48 7765-5241-S48 7765-5243-S48 7766-1345A-42 7766-1448-42 7766-5243-S48 7766-5245-S48 7766-5245-S65 7766-5248-S48 7766-5345A-R48 7766-5345A-S48 7766-5348A-R48 7766-5348A-S48 7766-5351A-R48 7766-5351A-S48 7766-5443-R48 7766-5445-R48 7766-5602-S45 7770-5233-B48 7770-5235-B48 7770-9028-42 7770-9030-42 7770-9032-42 7770-9035-42 7776-1932-B48 7776-1936-B48 7776-1938-B48 7776-1940-B48 7776-4432-B48 7776-4435-B48 7776-4438-B48 7776-4440-B48 7776-6438-B48 7795-5232-B48 7795-5235-B48 7795-5238-B48 7795-6428-B48 7795-6430-B48 16, 22 16, 22 16, 22 16 21 21 21 21 21 21 15 21 15 21 21 23 23 23 23 23 23 27 27 27 27 27 27 27 27 27 27 27 27 27 27 28 8 8 8 8 8 8 9 9 9 9 9 9 9 9 9 8 8 8 8 8 7801-6103-13 7801-6110-13 1,10 3,40 1 10 11, 75 11 • 125 TOP HAMMER DRILLING TOOLS Numerical index with weight table Part No. Weight (kg) Package size (pcs) Page Part No. Weight (kg) 18,10 2,30 2,70 2,75 2,65 1,85 1,30 1,30 1,45 4,60 4,40 1,20 1,80 1,85 2,50 2,30 1,00 1,40 2,50 3,60 4,80 3,60 4,60 5,70 6,90 9,00 11,50 9,50 9,99 11,74 14,06 11,60 12,50 13,76 15,00 5,80 6,30 8,00 9,80 13,20 16,40 19,70 6,00 7,50 9,00 11,00 17,70 21,70 9,50 12,50 15,00 20,00 15 15 10 10 10 10 10 15 15 15 15 15 15 15 10 15 15 Package size (pcs) 1 4 1 4 1 4 4 4 1 1 1 1 1 1 1 1 1 20 20 20 20 20 20 20 20 20 Page 7814-7136-11 7802-6103-13 7802-6108-13 7802-6110-13 7802-7103-14 7802-7503-20 7803-3100-30 7803-3576-01 7803-3588-01 7803-3590-03 7803-3591-01 7803-3593-01 7803-3602-30 7803-3652-01 7803-3656-01 7803-3670-02 7803-4200-30 7803-4700-01 7803-4700-50 7803-4703-01 7803-4725-01 7803-4726-01 7803-7500-61 7803-7531-01 7803-7532-01 7803-7535-02 7803-7547-01 7803-7549-01 7803-7553-01 7803-7557-01 7803-7585-01 7803-7586-01 7803-7662-01 7803-7663-01 7804-3575-01 7804-3575-01 7804-3590-03 7804-3590-03 7804-3590-03 7804-3590-03 7804-3652-01 7804-3670-02 7804-4700-01 7804-4725-01 7804-4993-01 7804-7500-60 7804-7500-60 7804-7500-60 7804-7500-60 7804-7531-01 7804-7536-01 7804-7554-01 7804-7585-01 7805-6015 7805-7015 7807-6103-11 7807-6124-11 7807-6132-11 7807-6136-11 7807-7103-11 7807-7136-11 7809-7547-01 126 • 1,10 3,00 3,50 1,40 1,60 2,00 4,75 3,35 3,90 4,10 4,60 2,10 3,70 4,10 4,70 2,60 3,70 2,70 3,60 3,30 2,75 3,00 3,85 5,70 4,20 2,55 2,55 3,90 5,60 5,10 5,40 5,70 5,70 4,05 4,05 4,20 4,20 4,20 4,20 3,80 4,25 3,90 3,80 5,50 3,50 3,50 3,50 3,50 4,15 4,40 5,20 5,30 10,45 10,40 1,20 7,70 11,50 12,50 1,30 18,10 2,70 1 10 10 1 1 2 1 2 1 1 1 2 2 2 1 2 2 2 2 1 2 2 2 1 1 2 2 2 1 1 1 1 1 2 2 1 1 1 1 2 0 2 0 1 2 2 2 2 1 1 1 1 2 4 1 1 4 1 1 1 2 10, 13, 75 10, 13 10, 13 75 75 76 77, 83 76, 83 77, 89 77-78, 83, 89 77-78 84 78 78 78 76 84 84 89 82 82 80-81, 89 85 86 85 84 84 85 85 85 85 84 84 76 83 77 78 89 89 78 78 84 82 79 80 81 81 89 85 85 85 85 81 81 12, 75 12 12 12 12, 75 12 84 7821-1435 7821-2935 7821-3040 7821-3440 7821-5440 7822-1526 7822-2526 7822-2726 7822-2826 7822-3526 7823-2647 7823-3647 7832-3301 7833-4301 7833-4401 7834-3303 7834-4401 7837-3301 7839-3301 7851-1308-20 7851-1312-20 7851-1316-20 7852-2309-20 7852-2312-20 7852-2315-20 7852-2318-20 7852-2324-20 7852-2331-20 7853-1724-20 7853-1726-20 7853-1731-20 7853-1737-20 7853-1824-20 7853-1826-20 7853-1829-20 7853-1831-20 7853-2631-20 7853-2637-20 7853-3309-20 7853-3312-20 7853-3315-20 7853-3318-20 7853-3324-30 7853-3331-30 7853-3337-30 7853-5109-20 7853-5112-20 7853-5115-20 7853-5118-20 7853-5131-20 7853-5137-20 7853-6224-20 7853-6226-20 7853-7631-20 7853-7637-20 15 22-23 23 28 26 30 22 20 21 23 26 55 52 115 115 115 115 115 115 115 11 11 11 14 14 14 14 14 14 21 21 21 21 21 21 21 21 23 23 52 52 52 52 36 36 36 52 52 52 52 36 36 19 19 22 22 TOP HAMMER DRILLING TOOLS Numerical index with weight table Part No. Weight (kg) Package size (pcs) Page Part No. Weight (kg) 5,50 3,50 3,50 1,00 0,80 4,40 3,10 3,45 5,20 0,21 0,30 1,65 3,90 0,60 3,90 6,00 8,40 0,93 1,70 0,51 0,73 0,70 0,84 0,93 1,50 0,50 3,00 2,00 10,90 4,90 4,90 18,00 0,55 240,00 4,30 5,70 10,00 10,20 16,00 24,00 24,00 48,00 28,00 46,00 77,50 40,00 40,00 76,00 89,00 0,00 2,00 2,00 0,05 0,02 0,20 0,01 0,25 50,00 60,00 5,00 120,00 Package size (pcs) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 15 15 10 10 10 10 1 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Page 7854-8637-20 7854-8643-20 7854-8649-20 7854-9631-20 7854-9637-20 7854-9643-20 7854-9649-20 7857-4821-20 7857-4831-20 7859-2931-20 7870-1140-11 7870-1144-11 7870-1148-11 7870-1156-11 7870-1164-11 7870-1172-11 7870-1180-11 7870-5124-11 7870-5132-11 7870-6106-11 7870-6112-11 7870-6118-11 7870-6120-11 7870-6124-11 7870-6131-11 7870-6137-11 7876-6106-11 7876-6108-11 7876-6112-11 7876-6118-11 7876-6120-11 7876-6124-11 7876-6131-11 7876-6136-11 790-1100 790-2100 790-2200 790-2300 790-3100 790-4100 790-4200 790-6100 791-4101 791-4102 791-4103 791-4105 7922-6108-11 7922-6112-11 7922-6116-11 7922-6120-11 7922-6124-11 795-1336 795-1336 795-1340 795-1343 795-1396 795-1407 795-1408 23,50 27,00 30,50 23,10 27,80 32,80 37,00 6,40 10,00 14,50 17,10 13,90 14,80 17,50 19,80 22,50 7,92 10,24 2,28 4,16 6,04 6,54 7,92 9,79 11,40 2,20 2,70 4,10 5,90 7,80 7,80 9,60 11,00 34,00 4,50 4,50 2,00 42,00 52,00 76,00 45,00 0,03 0,05 0,05 5,00 3,30 4,70 5,60 7,00 7,90 0,01 0,01 0,01 0,02 0,01 4,20 3,10 15 10 10 15 15 10 10 20 20 15 15 15 15 15 15 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1 1 1 1 1 1 1 1 1 1 1 1 20 20 20 20 20 1 1 1 1 1 1 1 25 25 25 25 25 25 25 12 12 16 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 9 9 9 9 9 9 9 9 70 70 70 71 69 69 69 71 69 69 69 69, 71 7 7 7 7 7 105 112, 117 112 105, 112 93-94, 96, 98, 112 116 116 795-1420 795-1431 795-1432 795-1467 795-1468 795-1469 795-1492 795-1494 795-1495 795-1600 795-1601 795-1604 795-1605 795-1606 795-1607 795-1608 795-1609 795-1611 795-1613 795-1629 795-1630 795-1631 795-1632 795-1676 795-1681 795-1686 795-1687 795-1690 795-1696 795-1699 795-1960 795-1961 795-1962 795-1964 795-2423 795-2476 795-2600 795-2601 795-2603 7953-4618-20 7953-4631-20 7955-5618-20 7955-5637-20 7956-6318-21 7956-6337-70 7956-7637-70 7957-7618-20 7957-7618-20 7957-7637-70 7957-8737-70 796-1400 796-1858 796-1858 796-1862 796-1863 796-1865 796-1866 796-1867 796-2930 796-2930-52 796-2931 796-2960-XX 116 116 116 116 116 7, 116 116 116 116 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 117 116 116 117 117 117 36, 52 36 39, 55 39 42, 57 42 42 45 59 45 45 116 101 112 112 112 112 112 101 118 118 118 101 • 127 TOP HAMMER DRILLING TOOLS Numerical index with weight table Part No. Weight (kg) 260,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 380,00 355,00 355,00 355,00 355,00 355,00 355,00 355,00 355,00 355,00 355,00 355,00 355,00 335,00 335,00 335,00 335,00 335,00 335,00 335,00 335,00 335,00 335,00 335,00 335,00 22,00 18,00 46,00 38,00 43,00 38,00 46,00 38,00 38,00 38,00 38,00 43,00 38,00 38,00 38,00 2,70 2,90 18,00 16,50 Package size (pcs) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Page Part No. Weight (kg) 95,00 95,00 95,00 95,00 95,00 95,00 95,00 95,00 95,00 95,00 95,00 95,00 95,00 95,00 50,00 96,00 96,00 96,00 96,00 96,00 96,00 96,00 96,00 96,00 96,00 96,00 96,00 96,00 96,00 48,00 56,00 70,00 74,00 43,00 55,00 Package size (pcs) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Page 796-3201-XX 796-3231-XX 796-32XX-51 796-32XX-51 796-32XX-52 796-32XX-52 796-32XX-55 796-32XX-55 796-32XX-56 796-32XX-56 796-32XX-57 796-32XX-57 796-32XX-58 796-32XX-58 796-32XX-59 796-32XX-59 796-32XX-60 796-32XX-60 796-32XX-61 796-32XX-61 796-32XX-65 796-32XX-65 796-32XX-66 796-32XX-66 796-3301-XX 796-330X-51 796-330X-52 796-330X-55 796-330X-56 796-330X-57 796-330X-58 796-330X-59 796-330X-60 796-330X-61 796-330X-65 796-330X-66 796-3601-XX 796-360X-51 796-360X-52 796-360X-55 796-360X-56 796-360X-57 796-360X-58 796-360X-59 796-360X-60 796-360X-61 796-360X-65 796-360X-66 796-3800 796-3830 796-5012-50 796-5012-51 796-5012-52 796-5012-55 796-5012-56 796-5012-57 796-5012-58 796-5012-59 796-5012-60 796-5012-61 796-5012-65 796-5012-66 796-5012-XX 796-5100 796-5116 796-5300 796-5330 128 • 101 102 101 102 101 102 101 102 101 102 101 102 101 102 101 102 101 102 101 102 101 102 101 102 103 103 103 103 103 103 103 103 103 103 103 103 104 104 104 104 104 104 104 104 104 104 104 104 108 108 107 107 107 107 107 107 107 107 107 107 107 107 107 93 93 105 106 796-6005-50 796-6005-51 796-6005-52 796-6005-55 796-6005-56 796-6005-57 796-6005-58 796-6005-59 796-6005-60 796-6005-61 796-6005-65 796-6005-66 796-6005-XX 796-6006-XX 796-6050-50 796-6105-50 796-6105-51 796-6105-52 796-6105-55 796-6105-56 796-6105-57 796-6105-58 796-6105-59 796-6105-60 796-6105-61 796-6105-65 796-6105-66 796-6105-XX 796-6106-XX 796-6205 796-6206 796-6215-XX 796-6216-XX 796-6235 796-6236 796-62XX-50 796-62XX-51 796-62XX-52 796-62XX-55 796-62XX-56 796-62XX-57 796-62XX-58 796-62XX-59 796-62XX-60 796-62XX-61 796-62XX-65 796-62XX-66 796-6300 796-6301 796-6310-XX 796-6311-XX 796-6330 796-6331 796-63XX-50 796-63XX-51 796-63XX-52 796-63XX-55 796-63XX-56 796-63XX-57 796-63XX-58 796-63XX-59 796-63XX-60 796-63XX-61 796-63XX-65 796-63XX-66 796-9200-50 796-9200-51 43,00 46,00 65,00 70,00 38,00 43,00 350,00 350,00 98 98 98 98 98 98 98 98 98 98 98 98 98 98 101 99 99 99 99 99 99 99 99 99 99 99 99 99 99 94 94 96 96 95 95 96 96 96 96 96 96 96 96 96 96 96 96 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 97 100 100 TOP HAMMER DRILLING TOOLS Numerical index with weight table Part No. Weight (kg) 275,00 350,00 350,00 350,00 350,00 350,00 350,00 350,00 350,00 350,00 350,00 60,00 2,40 3,00 3,20 3,60 4,00 4,20 4,80 5,40 6,00 6,60 7,20 8,00 9,00 10,00 11,00 12,00 1,20 1,80 0,66 1,05 1,35 4,50 1,85 2,05 6,80 8,20 6,70 6,10 6,75 1,60 3,30 3,70 4,10 4,50 7,90 1,05 1,05 1,00 9,00 3,35 1,85 10,20 11,70 12,40 13,50 15,00 17,30 19,20 21,10 22,90 0,66 Package size (pcs) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Page Part No. Weight (kg) 0,66 1,10 1,10 1,39 1,39 4,86 5,67 6,72 7,29 8,10 8,91 9,72 10,80 12,15 13,50 14,85 16,20 0,10 14,80 14,80 14,80 0,04 0,04 0,05 0,05 0,05 0,06 0,06 0,07 0,08 2,80 4,20 1,00 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,00 0,04 0,04 0,05 0,05 0,05 0,06 0,06 0,07 0,08 0,10 0,06 0,06 4,85 4,85 5,95 1,50 1,05 1,00 7,20 Package size (pcs) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Page 796-9200-52 796-9200-55 796-9200-56 796-9200-57 796-9200-58 796-9200-59 796-9200-60 796-9200-61 796-9200-65 796-9200-66 796-9200-XX 796-9250-xx 7970-1200-xx 7970-1500-xx 7970-1600-xx 7970-1800-xx 7970-2000-xx 7970-2100-xx 7970-2400-xx 7970-2700-xx 7970-3000-xx 7970-3300-xx 7970-3600-xx 7970-4000-xx 7970-4500-xx 7970-5000-xx 7970-5500-xx 7970-6000-xx 7970-600-xx 7970-900-xx 7970-P154D 7970-P156 7970-P158 797-1100-32 797-1101-25 797-1101-32 797-1105-48 797-1105-58 797-1175-35 797-1175-44 7971-1800-xx 797-1185-28 797-1190-23 797-1190-26 797-1190-29 797-1190-32 7971-2100-xx 797-1227-10 797-1227-10 797-1227-15 7971-2400-xx 797-1250-10 797-1252-15 7971-2700-xx 7971-3000-xx 7971-3300-xx 7971-3600-xx 7971-4000-xx 7971-4500-xx 7971-5000-xx 7971-5500-xx 7971-6000-xx 7971-P154D 100 100 100 100 100 100 100 100 100 100 100 100 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 110 110 110 110 110 110 110 68 110 110 110 110 110 68 105 111 105, 111 68 111 111 68 68 68 68 68 68 68 68 68 67 7971-P154D 7971-P156 7971-P156 7971-P158 7971-P158 7972-1800-xx 7972-2100-xx 7972-2400-xx 7972-2700-xx 7972-3000-xx 7972-3300-xx 7972-3600-xx 7972-4000-xx 7972-4500-xx 7972-5000-xx 7972-5500-xx 7972-6000-xx 797-5114-03 797-5130-10 797-5130-10 797-5130-10 797-5295-07 797-5295-08 797-5295-09 797-5295-10 797-5295-11 797-5295-12 797-5295-13 797-5295-14 797-5295-16 797-5330-91 797-5330-92 797-5348-XX 797-5356-08 797-5356-10 797-5356-11 797-5356-12 797-5356-14 797-5356-16 797-5366-09 797-5366-10 797-5366-11 797-5366-12 797-5366-14 797-5366-16 797-5400-07 797-5400-08 797-5400-09 797-5400-10 797-5400-11 797-5400-12 797-5400-13 797-5400-14 797-5400-16 797-5400-18 797-5452 797-5452 797-5488-75 797-5488-75 797-5488-85 797-5489-50 797-5502-50 797-5503-60 797-5510-05 797-5510-06 68 67 68 67 68 67 67 67 67 67 67 67 67 67 67 67 67 116 94 96 98 109 109 109 109 109 109 109 109 109 105 105 98 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 109 93-94 96, 98 94 96, 98 93 105 94, 96 99 94, 96 94, 96 • 129 TOP HAMMER DRILLING TOOLS Numerical index with weight table Part No. Weight (kg) 4,00 2,00 3,00 Package size (pcs) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10 10 10 5 5 5 5 5 5 Page 797-5510-20 797-5510-30 797-5510-40 797-5615-xx 797-5712-01 797-5730-13 797-5747-50 797-5766-06 797-5771 797-5773-20 797-5775-20 797-5870-10 797-5870-20 797-5870-90 797-5910-28 797-6015-56 797-6015-60 797-6020 797-6020-23 797-6020-25 797-6020-28 797-6020-32 797-6020-33 797-6020-35 797-6020-38 797-6020-45 797-6035-06 797-6035-07 797-6035-08 797-6035-45 7985-6315-26 7985-6318-26 7991-2031 7993-0444 7993-2443 7993-3644 7994-3455 7994-3655 7999-3640 1,50 0,07 0,04 1,00 1,00 0,42 1,20 1,23 7,00 0,81 1,00 1,10 0,00 1,26 0,24 0,26 0,23 0,36 28,00 32,00 0,45 1,20 1,05 0,90 1,90 1,70 0,77 94, 96 94, 96 94, 96 100 116 101 93, 105 105 101, 105 94, 96, 98, 101 108 94, 96, 98 94, 96, 98 93-94, 101 94, 96 101 101 101, 103, 112 112 112 112 112 112 112 112 112 101 104 104 101, 102 60 60 11 115 115 20-23, 52 115 25 16, 20 130 • TOP HAMMER DRILLING TOOLS Notes ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... TOP HAMMER DRILLING TOOLS • 131 Notes ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... 132 • TOP HAMMER DRILLING TOOLS Notes ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... TOP HAMMER DRILLING TOOLS • 133 Notes ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... 134 • TOP HAMMER DRILLING TOOLS Notes ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... TOP HAMMER DRILLING TOOLS • 135 Notes ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... ...................................................................................................................................................................... 136 • TOP HAMMER DRILLING TOOLS www.sandvik.com Sandvik Mining and Construction Tools AB SE-811 81 Sandviken, Sweden. Tel +46 26 26 20 00 Fax +46 26 26 23 00 HR-12281-ENG AB Sandvikens Tryckeri
Comments
Copyright © 2025 UPDOCS Inc.