NEC4000 Programming

NEC RSenCounter 4000 Reference Manual Part No. 2350REF01 August 2001 This manual has been developed by NEC Infrontia, Inc. It is intended for the use of its customers and service personnel, and should be read in its entirety before attempting to install or program the system. Any comments or suggestions for improving this manual would be appreciated. Forward your remarks to: NEC Infrontia, Inc. 4 Forest Parkway, Shelton, CT 06484 Attention: Manager, Technical Publications [email protected] Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation with respect to, any of the Equipment covered. This manual is subject to change without notice and NEC Infrontia, Inc. has no obligation to provide any updates or corrections to this manual. Further, NEC Infrontia, Inc. also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this manual is complete or accurate in all respects and NEC Infrontia, Inc. shall not be liable for any errors or omissions. In no event shall NEC Infrontia, Inc. be liable for any incidental or consequential damages in connection with the use of this manual. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied or reproduced without prior written consent of NEC Infrontia, Inc. © 2001 by NEC Infrontia, Inc. All Rights Reserved Printed in U.S.A. Table of Contents S-Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 S-Mode Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 S-MODE MENU STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 STATION NUMBER ASSIGNMENT [S1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 SYSTEM CONFIGURATION [S2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 SYSTEM WIDE FEATURES [S2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 STATION GROUP [S2-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 STATION 1 [S2-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 STATION REGISTRATION [S2-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 STATION 1 [S2-3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 MASTER AND BACK UP ASSIGNMENT [S2-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 EDIT MEMORY ALLOCATION TABLE [S3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 COMMON CONFIGURATION [S3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 SYSTEM MASTER [S3-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 TRACKING MASTER [S3-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 LOCAL STATION [S3-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 KEY ASSIGNMENT [S4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 KEY BOARD LEVEL 1 SELECTED [S4-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 KEYBOARD LEVEL PROGRAMMING [S4-1-1] . . . . . . . . . . . . . . . . . . . . . . . . . . .12 DOWNLOAD PROGRAMS [S5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 SYSTEM SOFTWARE [S5-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 SYSTEM SOFTWARE-BY STATION GROUP [S5-1-2] . . . . . . . . . . . . . . . . . . . . .14 SYSTEM SOFTWARE-BY RANGE [S5-1-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 INSTALLATION PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 RUN THE SYSTEM TEST SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 INITIALIZATION [S6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 CLEAR RAM AND INSTALL DEFAULT PROGRAM [S6-1] . . . . . . . . . . . . . . . . . . . . . .15 CLEAR TOTAL AND COUNTERS [S6-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 [S6-3] to [S6-9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 INSTALL DEFAULT MESSAGES [S6-10] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 ALL MESSAGES [S6-10-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 SCREEN SYSTEM DESCRIPTOR [S6-10-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 RECEIPT/CHECK SYSTEM DESCRIPTOR [S6-10-5] . . . . . . . . . . . . . . . . . . . . . . .16 RECEIPT/CHECK HEADER AND FOOTER [S6-10-6] . . . . . . . . . . . . . . . . . . . . . .16 CREDIT CARD AGREEMENT MESSAGE (CHARGE) [S6-10-7] . . . . . . . . . . . . .16 CREDIT CARD AGREEMENT MESSAGE (CREDIT) [S6-10-8] . . . . . . . . . . . . . .16 GUEST CHECK TRAIL MESSAGE [S6-10-9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 KITCHEN PRINTER MESSAGE [S6-10-10] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 REPORT MESSAGE [S6-10-11] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 INSTALL DEFAULT FUNCTION KEYS [S6-11] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 INSTALL DEFAULT KEYBOARD [S6-12] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 SYSTEM PASSWORD [S7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 SYSTEM TEST [S8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 2350REF01 N Table of Contents- 1 Table of Contents P-MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 P-MODE MENU STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 P-MODE MENU STRUCTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 EDIT SYSTEM CONFIGURATION [P1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 SYSTEM WIDE FEATURES [P1-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 STATION GROUP [P1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 STATION 1 [P1-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 STATION REGISTRATION [P1-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 STATION 1 [P1-3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 MASTER AND BACK UP ASSIGNMENT [P1-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 DOWNLOAD SYSTEM CONFIGURATION [P1-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 REPORT GROUPS AND TIME PERIODS [P2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 MAJOR GROUP [P2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 MAJOR GROUP RECORD [P2-1-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 SUB GROUP [P2-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 SUB GROUP [P2-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 PRODUCT MIX GROUP [P2-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 PRODUCT MIX GROUP [P2-3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 TIME PERIODS AUTO CONFIGURATION [P2-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 TIME PERIOD BY MANUAL CONFIGURATION [P2-5] . . . . . . . . . . . . . . . . . . . . . . . . .27 TAXES [P3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 TAX CONFIGURATION [P3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 TAX 1 [P3-1-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 TAX TABLE PROGRAMMING [P3-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 TAX TABLE PROGRAMMING [P3-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 TAX OPTION [P3-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 SYSTEM OPTION [P4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 GLOBAL OPTION [P4-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 TRANSACTION OPTION [P4-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 TABLE SERVICE OPTION [P4-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 DRAWER AND TENDER OPTION [P4-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 PRINT FORMAT AND OPTION [P4-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 RECEIPT OPTION [P4-5-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 RECEIPT FORMAT [P4-5-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 KITCHEN REQUISITION [P4-5-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 REPORT [P4-5-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 TRANSACTION LOG [P4-5-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 SYSTEM LOG [P4-5-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 KEY STROKE HISTORY [P4-5-7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 CTS (CLOSED TRANSACTION SUMMARY) [P4-5-8] . . . . . . . . . . . . . . . . . . . . . .42 CLOSING OPTION [P4-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 DISPLAY OPTION [P4-7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 SCREEN CONFIGURATION [P4-8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 ORDER/CHECK INFORMATION LINE (Line 1) [P4-8-1] . . . . . . . . . . . . . . . . . . .44 ITEM LINE (Line 2-17) [P4-8-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 ACTION LINE (Line 19) [P4-8-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 SERVICE INFORMATION LINE [P4-8-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 STATUS LINE [P4-8-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 TENDER INFORMATION (Line 17) [P4-8-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 Table of Contents - 2 N 2350REF01 Table of Contents PLU PROGRAMMING [P5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 PLU [P5-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 CREATE OR EDIT PLU [P5-1-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 CREATE PLU BY RANGE [P5-1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 DELETE PLU [P5-1-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 DELETE PLU BY RANGE [P5-1-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 PLU ACCESS FROM KEYBOARD [P5-1-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 PLU ACCESS FROM PLU LIST [P5-1-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 EDIT OPTIONAL PLU RECEIPT DESCRIPTOR [P5-1-7] . . . . . . . . . . . . . . . . . . . .54 EDIT KP/KVS DESCRIPTOR [P5-1-8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 EDIT KP/KVS DESCRIPTOR [P5-1-8-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 MENU KEY RELOCATION [P5-1-9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 PLU PROPERTY [P-5-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 PLU [P5-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 PLU SHIFT [P5-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 PLU SHIFT [P5-3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 PLU PRICE EDIT [P5-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 PRICE EDIT [P5-4-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 PLU PRICE TABLE [P5-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62 PRICE TABLE [P5-5-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 PLU PRICE LEVEL SCHEDULER [P5-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 CONDIMENT TABLE [P5-7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 CONDIMENT TABLE [P5-7-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 CONDIMENT CHAIN [P5-8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 CONDIMENT CHAIN [P5-8-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 LINKED PLU TABLE [P5-9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 LINKED PLU TABLE (LPT) [P5-9-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 DISCOUNT CATEGORY [P5-10] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 DISCOUNT CATEGORY [P5-10-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68 PRINT PLU BY TBL, PRICE LIST, PRICE SCHEDULER [P5-11] . . . . . . . . . . . . . . . . . .69 DOWNLOAD [P5-13] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 INVENTORY [P6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 SPECIAL ITEM STOCK [P6-1-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 MESSAGES [P7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 FIXED SCREEN MESSAGE ON ACTION LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 SCREEN MESSAGE [P7-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 SCREEN MESSAGE (SHORT) [P7-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 SCREEN MESSAGE (LONG) [P7-2-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 DEFAULT SYSTEM COLOR [P7-2-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 RECEIPT/GUEST CHECK MESSAGE [P7-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 RECEIPT/GUEST CHECK HEADER AND FOOTER [P7-3-1] . . . . . . . . . . . . . . . .90 RECEIPT/GUEST CHECK SYSTEM MESSAGE [P7-3-2] . . . . . . . . . . . . . . . . . . . .90 CREDIT CARD AGREEMENT MESSAGE (CHARGE) [P7-3-3] . . . . . . . . . . . . . .95 CREDIT CARD AGREEMENT MESSAGE (CREDIT) [P7-3-4] . . . . . . . . . . . . . . .95 GUEST CHECK TRAIL MESSAGE [P7-3-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96 KITCHEN PRINTER MESSAGE [P7-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 KITCHEN PRINTER MESSAGE [P7-4-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97 KP GROUP DESCRIPTOR [P7-4-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 REPORT MESSAGE [P7-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 REPORT MESSAGE [P7-5-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99 2350REF01 N Table of Contents- 3 Table of Contents MONTH AND DAY MESSAGE [P7-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 MONTH AND DAY MESSAGE [P7-6-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 KEYBOARD SYSTEM [P8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110 EDIT FUNCTION KEY FROM KEYBOARD [P8-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110 EDIT FUNCTION KEY FROM KEYBOARD [P8-1-1] . . . . . . . . . . . . . . . . . . . . . .110 EDIT FUNCTION KEY FROM A LIST [P8-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 EDIT FUNCTION KEY FROM A LIST [P8-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . .111 EDIT MACRO KEY [P8-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 MACRO KEY EDIT [P8-3-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112 TIME ACTIVATE KEY [P8-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113 TIME ACTIVATE KEY [P8-4-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 TLU KEY PROGRAMMING [P8-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114 TLU KEY PROGRAMMING [P8-5-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 MLU KEY PROGRAMMING [P8-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 MLU KEY PROGRAMMING [P8-6-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116 COUPON AND AUTO-COMBO [P9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 COUPON AND AUTO-COMBO OPTION [P9-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 COUPON [P9-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 COUPON [P9-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118 AUTO COMBO PROGRAMMING [P9-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 AUTO COMBO PROGRAMMING [P9-3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122 HUMAN RESOURCES [P10] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124 EMPLOYEE FILE [P10-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124 EMPLOYEE FILE [P10-1-1/999] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125 TIME & ATTENDANCE [P10-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 GLOBAL OPTIONS [P10-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126 HOLIDAY PAY PROGRAMMING [P10-2-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . .127 JOB CODE TABLE [P10-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128 JOB CODE TABLE [P10-3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129 PAY RATE TABLE [P10-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129 PAY RATE TABLE [P10-4-1/60] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130 AUTHORITY LEVEL [P10-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130 PRINT EMPLOYEE LIST [P10-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 PERIPHERALS [P11] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 CREATE/EDIT PRINTER LIST (1-30) [P11-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 CREATE/EDIT PRINTER LIST [P11-1-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137 RECEIPT/REPORT/LOG PRINTER ASSIGNMENT [P11-2] . . . . . . . . . . . . . . . . . . . . . .137 RECEIPT/REPORT/LOG PRINTER ASSIGNMENT [P11-2-1] . . . . . . . . . . . . . . .138 CREATE/EDIT KITCHEN PRINTER TABLE [P11-3] . . . . . . . . . . . . . . . . . . . . . . . . . . .139 KP TABLE [P11-3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140 KP TABLE ASSIGNMENT TO KP LEVEL [P11-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141 KP TABLE ASSIGNMENT TO KP LEVEL [P11-4-1] . . . . . . . . . . . . . . . . . . . . . .142 KVS PROGRAMMING [P11-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142 SCALE [P11-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143 SCALE [P11-6-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143 TARE WEIGHT TABLE [P11-6-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 CREDIT CARD INTERFACE [P11-7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144 CREDIT CARD INTERFACE (P11-7-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 CREDIT CARD MODEM LIST [P11-7-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 CREDIT CARD MODEM ASSIGNMENT [P11-7-3] . . . . . . . . . . . . . . . . . . . . . . .146 Table of Contents - 4 N 2350REF01 Table of Contents CREDIT CARD TYPE CONFIGURATION [P11-7-4] . . . . . . . . . . . . . . . . . . . . . . .146 TERMINAL MODE [P11-7-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147 SCANNER [P11-8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 SCANNER INTERFACE [P11-8-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148 EAN13 INF. EMBEDDED BAR CODE [P11-8-2] . . . . . . . . . . . . . . . . . . . . . . . . . .149 OTHER PERIPHERAL CONFIGURATIONS [P11-15] . . . . . . . . . . . . . . . . . . . . . . . . . . .149 POLLING MODEM CONNECTION [P11-15-1] . . . . . . . . . . . . . . . . . . . . . . . . . . .149 USER CARD DEFINITION [P11-15-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150 EMPLOYEE CARD CONFIGURATION [P11-15-3] . . . . . . . . . . . . . . . . . . . . . . . .150 DOWNLOAD LOGO TO TM-T88 [P11-15-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151 POLE DISPLAY [P11-15-7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152 DRIVE THRU ORDER CONFIRMATION BOARD (OCB) [P11-15-8] . . . . . . . . .152 PRINT A LIST BY STATION [P11-16] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154 PRINT A LIST BY PERIPHERAL [P11-17] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155 RS-232 WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157 TRAINING [P12] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 TRANSACTION OPTION [P12-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 REPORT OPTION [P12-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 PRINTING OPTION [P12-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158 UTILITY [P13] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 DOWNLOAD PROGRAM [P13-1] OR AFTER [P12-1-2] . . . . . . . . . . . . . . . . . . . . . . . . .159 DOWNLOAD APPLICATION PROGRAMS-All [P13-1-1] . . . . . . . . . . . . . . . . . .159 DOWNLOAD APPLICATION PROGRAMS BY STATION GROUP [P13-1-2] / [P12-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 DOWNLOAD APPLICATION PROGRAMS BY STATION NUMBER [P13-1-1-3] / [P12-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159 Z1 AND PRE-POLL Z1 STRINGS [P13-2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Z1 & PRE-POLL Z1 STRINGS # 1 [P13-2-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160 Z2 AND PRE-POLL Z2 STRINGS [P13-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162 Z2 & PRE-POLL Z2 STRINGS # 1 [P13-3-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163 PROGRAM PRINT [P13-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 SYSTEM CONFIGURATION [P13-4-1] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165 REPORT GROUPS AND TIME PERIOD [P13-4-2] . . . . . . . . . . . . . . . . . . . . . . . .165 TAXES [P13-4-3] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .167 SYSTEM OPTION [P13-4-4] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168 PLU [P13-4-5] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169 INVENTORY [P13-4-6] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 MESSAGES [P13-4-7] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .171 KEYBOARD SYSTEM [P13-4-8] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .173 COUPON AND AUTO-COMBO [P13-4-9] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174 HUMAN RESOURCES [P13-4-10] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175 PERIPHERALS [P13-4-11] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176 TRAINING [P13-4-12] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177 Z & PRE-POLL STRINGS [P13-4-13] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177 2350REF01 N Table of Contents- 5 Table of Contents Table of Contents - 6 N 2350REF01 S-Mode S-Mode Menu Structure S-Mode S-Mode Menu Structure S-MODE MENU STRUCTURE S-MODE 1 STATION NUMBER ASSIGNMENT 2 SYSTEM CONFIGURATION 3 EDIT MEMORY ALLOCATION 1 4 KEY ASSIGNMENT 5 DOWNLOAD PROGRAMS 6 INITIALIZATION 7 SYSTEM PASSWORD q q 1 This will conﬁgure the memory based on the Memory Allocation Table. In programming, all Character ﬁelds are left justiﬁed and Integer and Numeric ﬁelds are right justiﬁed. STATION NUMBER ASSIGNMENT [S1] S-MODE:SYSTEM CONFIGURATION ASSIGN STATION # (1-24) 99 SYSTEM CONFIGURATION [S2] S-MODE:SYSTEM CONFIGURATION 1 SYSTEM WIDE FEATURE 2 STATION GROUP 3 STATION REGISTRATION 4 MASTER & BACKUP ASSIGNMENT q Changes here will not be broadcasted. SYSTEM WIDE FEATURES [S2-1] S-MODE:SYSTEM WIDE FEATURE STORE ID # STORE NAME DECIMAL POINT (0-3) DECIMAL CHARACTER (0=".", 1=",") CURRENCY MARK CALENDAR FORMAT (0=M/D/Y, 1=D/M/Y, 2=Y/M/D) SYSTEM DATE SYSTEM DAY (0=SU,1=M,2=T,3=W,4=T,5=F,6=SA) SYSTEM TIME # OF NETWORK RETRIES # OF PRINTER RETRIES ORDER # SYSTEM (0=COMMON, 1=LOCAL) STARTING ORDER # TRACK1 # SYSTEM (0=AUTO, 1=MANUAL) TRACK2 # SYSTEM (0=AUTO, 1=MANUAL) (1/2) abcdefgh XXXXXXXXXXXX 9 9 XXX 9 MM/DD/YYYY 9 HH:MM 9 9 9 99999 9 9 0-1 0-1 2350REF01 NEC RSenCounter 4000 Reference Manual x 1 S-Mode S-Mode Menu Structure S-MODE:SYSTEM WIDE FEATURE RECALL OWN TRACK # ORDER ONLY RSC. DOWNLOADS FILES TO MODEM STA ONLY (2/2) N N System Wide Feature [S2-1]: Programming ﬁelds and explanations Field Descriptor STORE ID # STORE NAME DECIMAL POINT (0-3) CURRENCY MARK CALENDAR FORMAT SYSTEM DATE SYSTEM DAY SYSTEM TIME # OF NETWORK RETRY # OF PRINTER RETRY ORDER # SYSTEM? STARTING ORDER# 00:00 2 2 Local 00001 2 $ MM/DD/YY Default 1 Explanation 8 character alpha/numeric 12 character alpha/numeric Deﬁne the number of digits after the decimal point for Amount Currency Mark Deﬁne which calendar format to use Enter the system date Enter or assign the system day Enter the system time # of retries to attempt before prompt # of retries to attempt before prompt System wide common order # system or not Works in conjunction with Z Tran. Control ﬂag in system option-closing control. Local Order# system uses station number + last 3 digits of this number. TRACK 1 # SYSTEM? TRACK 2 # SYSTEM RECALL OWN TRACK# ORDER ONLY? AUTO INCR. Manual NO If YES, then a person who stored and the person who recalls the order must match. The order will be retrieved in FIFO unless designated. If YES, then PC download will automatically download programs to all other stations in the system. RSC. DOWNLOADS FILES TO MODEM STA ONLY NO 2 x NEC RSenCounter 4000 Reference Manual 2350REF01 S-Mode S-Mode Menu Structure STATION GROUP [S2-2] (1/2) S-MODE:STATION GROUP # DESCRIPTOR 99 ABCDEFGHIJKL q 99=1-24 Maximum of 24 Station Groups are available Press [1] [ENTER] or [ENTER] STATION 1 [S2-2-1] * STATION 2 TO 24 are in the same format. S-MODE:STATION GROUP STATION GROUP # (1-24) STATION GROUP DESCRIPTOR q q 99 XXXXXXXXXXXX 1-24 Maximum of 24 Station Groups are available Station Group Descriptor will be used to group stations under the same descriptor name for the station group reports. Station Group [S2-2]: Programming ﬁelds and explanations Field Descriptor STATION GROUP 1 Default STA GRP 1 Explanation Give a descriptor to this group Not mandatory STATION GROUP 24 Not mandatory 2350REF01 NEC RSenCounter 4000 Reference Manual x 3 S-Mode S-Mode Menu Structure STATION REGISTRATION [S2-3] Window 1 S-MODE:STATION REGISTRATION # 99 q DESCRIPTOR ABCDEFGHIJKL ACTIVE Y TYPE XXXXXXXX Station 16-24 are on the second page. Press [1] [ENTER] or [ENTER] STATION 1 [S2-3-1] * STATION 1 TO 24 are in the same format. S-MODE:STATION REGISTRATION STATION # (1-24) STATION DESCRIPTOR STATION GROUP (1-24) ACTIVE STARTING TRANSACTION # (1-9999) DEFAULT ORDER DESTINATION (0=NO DEST. 1=EATIN,2=TAKEOUT,3=TRK1,4=TRK2,5=DT) STATION TYPE (0=TS, 1=QS CNTR, 2=DT OT, 3=DT CSHR, 4=DT OT CSHR) SEND DT ORDER TO STATION (0-24) [SERVE] BY THIS STA. STOPS SVC.TIMER ENFORCE SERVE/PARK ENTRY ENFORCE STORE TRACKING SCREEN SAVER IN SEC (0-999) 99 XXXXXXXXXXXX 99 Y 9999 9 9 99 Y Y Y 999 Station Registration [S2-3-1]: Programming ﬁelds and explanations Field Descriptor STATION # STATION DESCRIPTOR STATION GROUP ACTIVE STARTING TRANSACTION # DEFAULT ORDER DESTINATION () STATION TYPE Default 1 ‘STATION 1’ 1 YES 0001 0 0 TABLE SERVICE Explanation Allow entering number to access stations 2-24. This descriptor will display on the lower left front display. The report of this station will be in this group. Used in conjunction with the closing control ﬂag. This deﬁnes the Screen format. DT OT is the same as QS CNTR except DT OT enforces [SEND DTO]. 4 x NEC RSenCounter 4000 Reference Manual 2350REF01 S-Mode S-Mode Menu Structure Station Registration [S2-3-1]: Programming ﬁelds and explanations Field Descriptor SEND DRIVE THROUGH ORDER TO STATION [SERVE] BY THIS STA. STOPS SVC.TIMER ENFORCE SERVE/PARK ENTRY ENFORCE STORE TRACKING SCREEN SAVER IN SEC. NO Default Explanation This is not available in TBL SVC. Deﬁne the destination station number to which the order is sent. If YES, then this station’s {SERVE} key to bump off the DT Order will be used to stop DT Service Timer Must enter either SERVE or PARK key before starting the new order. Tender key entry is prohibited if this is YES NO NO 180 MASTER AND BACK UP ASSIGNMENT [S2-4] S-MODE:MASTER & BACK UP ASSIGNMENT SYSTEM MASTER STATION # TRACKING: MASTER STATION # (1-24) 99 99 BACK UP STATION # (0-24) (1-24) 99 99 BACK UP STATION # (0-24) Master and Backup Assignments [S2-4]: Programming ﬁelds and explanations Field Descriptor SYSTEM: MASTER STATION # BACK UP STATION # TRACKING: MASTER STATION # BACK UP STATION # STATION 1 0 The number of the order Track File. Credit Card Tran. File STATION 1 0 Holds clock data, product projection, Z1 & Z2 Prepoll Area. Default Explanation 2350REF01 NEC RSenCounter 4000 Reference Manual x 5 S-Mode S-Mode Menu Structure EDIT MEMORY ALLOCATION TABLE [S3] S-MODE 1 COMMON CONFIGURATION 2 SYSTEM MASTER 3 TRACKING MASTER 4 LOCAL STATION REMAINING MEMORY 2321968 COMMON CONFIGURATION [S3-1] S-MODE:MEMORY ALLOCATION-COMMON CONFIGURATION # OF PLU PROPERTY # OF PLU # OF PLU SHIFT # OF PRICE TABLE # OF CONDIMENT TABLE # OF CONDIMENT CHAIN # OF LINKED PLU TABLE # OF MAJOR GROUP # OF SUB GROUP # OF PROD. MIX GROUP # OF EMPLOYEE # OF CASHIER # OF KITCHEN PRINTER TABLE # OF MACRO # OF TLU # OF MLU (1/3) 9999 9999 999 999 999 999 999 99 999 99 999 999 99 99 999 999 5 digits internally 5 digits internally S-MODE:MEMORY ALLOCATION-COMMON CONFIGURATION # OF COUPON # OF AUTO-COMBO TABLE # OF SPECIAL ITEM STOCK # OF RECEIPT DESCRIPTOR # OF TIME PERIOD TIME PERIOD: MAJOR GROUP TIME PERIOD: EAT-IN TIME PERIOD: TAKE-OUT TIME PERIOD: TRACK 1 TIME PERIOD: TRACK 2 TIME PERIOD: DRIVE THRU TIME PERIOD: DRIVE THRU SVC TIME # OF SHIFT IN A DAY # OF ITEM/TRANS. # OF PAID ORDER RECALL # OF CASH PULL (2/3) 999 99 999 999 999 Y Y Y Y Y Y Y 9 999 99 99 S-MODE:MEMORY ALLOCATION-COMMON CONFIGURATION GRAPHIC PRINTER LOGO (3/3) N 6 x NEC RSenCounter 4000 Reference Manual 2350REF01 S-Mode S-Mode Menu Structure Common Conﬁgurations [S3-1]: Programming ﬁelds and related ﬂags. Page 1/3 Field Descriptor # OF PLU PROPERTY # OF PLU # OF PLU SHIFT # OF PRICE TABLE # OF CONDIMENT TABLE # OF CONDIMENT CHAIN # OF LINKED PLU TABLE # OF MAJOR GROUP # OF SUB GROUP # OF PROD. MIX GROUP # OF EMPLOYEE # OF CASHIER # OF KITCHEN PRINTER TABLE # OF MACRO # OF TLU # OF MLU Default 20 500 20 10 50 10 10 20 50 5 20 10 5 30 10 30 Explanation 2350REF01 NEC RSenCounter 4000 Reference Manual x 7 S-Mode S-Mode Menu Structure Common Conﬁgurations [S3-1]: Programming ﬁelds and related ﬂags. Page 2/3 Field Descriptor # OF COUPON # OF AUTO-COMBO TABLE # OF SPECIAL ITEM STOCK # OF RECEIPT DESCRIPTOR # OF TIME PERIOD TIME PERIOD: MAJOR GROUP TIME PERIOD: EAT-IN TIME PERIOD: TAKE-OUT TIME PERIOD: TRACK 1 TIME PERIOD: TRACK 2 TIME PERIOD: DRIVE THRU TIME PERIOD: DRIVE THRU SVC TIME # OF SHIFT IN DAY # OF ITEM/TRANS. # OF PAID ORDER RECALL # OF CASH PULL Default 20 10 0 0 24 YES NO NO NO NO NO NO 0 50 5 10 Explanation (MULTIPLE OF 12) Same format as Financial =BANK DEPOSIT Common Conﬁgurations [S3-1]: Programming ﬁelds and related ﬂags. Page 3/3 Field Descriptor GRAPHIC PRINTER LOGO Default NO Explanation 8 x NEC RSenCounter 4000 Reference Manual 2350REF01 S-Mode S-Mode Menu Structure SYSTEM MASTER [S3-2] S-MODE:MEMORY ALLOCATION-SYSTEM MASTER CLOCK DATA FOR PAY PERIOD (0=NO,1=WK,2=BI-WK,3=SEMI-MO,4=MO) USE PRODUCT PROJECTIONS # OF Z1/Z2 PRE-POLL AREA KVS SERVICE TIME REPORT AREA # OF BUSINESS FLASH REPORT # OF CTS CONSOLIDATION AREA 9 N 0 N 99 9999 System Master [S3-2]: Programming ﬁelds and explanations Field Descriptor CLOCK DATA FOR PAY PERIOD (0=NO,1=WK,2=BIWK,3=SEMI-MO.4=MO.) Default WK Explanation Provide a maximum of WK=7+7, BWK=14+7. SEMI-MO.=16+7 DAYS punch record area. # OF EMPLOYEES x 10 x14/21/23 +MM/DD/YYYY. USE PRODUCT PROJECTIONS # OF Z1/Z2 PRE-POLL AREA Note 1) KVS SERVICE TIME REPORT AREA # OF BUSINESS FLASH REPORT # OF CTS CONSOLIDATION AREA q NO 0 This will reserve the area for # of Z1 or Z2 pre-poll. Need at least 1 for PC polling If YES, then reserve 108 periods x # OF Z1/Z2 PRE-POLL AREA Report is created when System wide Z1 Financial is taken at the System Master. 0=Disabled N 1-99 0-9999 Note 1: Pre-Poll of Z1 or Z2 will not be allowed more than the number of times set in the S-Mode Memory Allocation. Pre-polled data is polled and cleared by either the PC or manually at the NEC RSenCounter 4000. Pre-polled Data is polled in FIFO fashion. TRACKING MASTER [S3-3] S-MODE:MEMORY ALLOCATION-TRACKING MASTER # OF ORDER TRACK # OF CREDIT CARD TRACKING FILES 9999 1800 2350REF01 NEC RSenCounter 4000 Reference Manual x 9 S-Mode S-Mode Menu Structure LOCAL STATION [S3-4] S-MODE:MEMORY ALLOCATION-LOCAL STATION # OF DRIVE –THRU ORDER # OF CLOSED TRANS. SUMMARY (CTS) # OF KEY STROKE HISTORY AREA FOR TRANSACTION LOG AREA FOR SYSTEM LOG 99 9999 99999 9999 9999 q This information will not be downloaded to other station. In short, each station has to be programmed separately. Location Station [S3-4]: Programming ﬁelds and related ﬂags. Field Descriptor # OF DRIVE-THRU ORDER # OF CLOSED TRANS. SUMMARY (CTS) # OF KEY STROKE HISTORY AREA FOR TRANSACTION LOG (256 BYTES) x AREA FOR SYSTEM LOG BYTES) x (256 Default 0 0 0 0 0 Explanation 10 x NEC RSenCounter 4000 Reference Manual 2350REF01 S-Mode S-Mode Menu Structure KEY ASSIGNMENT [S4] S-MODE:KEY ASSIGNMENT # DESCRIPTOR 9 ABCDEFGHIJKL INTERNAL NAME KEY BRD LVL X S-MODE:KEY ASSIGNMENT # 1 2 3 4 5 q 1 DESCRIPTOR BREAKFAST LUNCH DINNER SUN. BRUNCH MANAGER INTERNAL NAME KEY BRD LVL 1 KEY BRD LVL 2 KEY BRD LVL 3 KEY BRD LVL 4 KEY BRD LVL 5 1 Corresponding keyboard level’s function key descriptor. Reﬂect this keyboard level on Line 20 Status Line. Press [1] [Enter] KEY BOARD LEVEL 1 SELECTED [S4-1] S-MODE:KEY ASSIGNMENT KB LEVEL 1 BREAKFAST PRESS THE KEY TO BE PROGRAMMED Key Assignment [S4-1]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR INTERNAL NAME Default Explanation Select Keyboard level Press [LOC. 1] 2350REF01 NEC RSenCounter 4000 Reference Manual x 11 S-Mode S-Mode Menu Structure KEYBOARD LEVEL PROGRAMMING [S4-1-1] S-MODE:KEY ASSIGNMENT – KB LEVEL 1 BREAKFASTABC CURRENT:CHEESE BURGEREXT 12345678901234 NEW ASSIGNMENT: KEY LOC. 001 KEY TYPE (0, 1-6) 1 CODE # xxxxxxxxxxxxxxxx 12345678901234 CODE# 00000000000001 00000000000002 00000000000004 00000000000005 12345678901233 12345678901234 12345678901235 12345678901236 12345678901237 12345678901238 Display Level & Descriptor Display current information xxx..DESCRIPTOR DESCRIPTOR TOMATO LETTUCE PICKLES MAYO HAMBURGER CHEESE BURGER HOT DOG GRILLED CHICKEN ROAST BEEF CHICKEN SANDWICH KEY TYPE 1=PLU 2=PLU SFT 3=FUNC 4=MACRO 5=TLU 6=MLU 0=TO MENU Press [EXIT] KEYBOARD LEVEL PROGRAMMING [S4-1-1-EXIT] S-MODE:KEY ASSIGNMENT KB LEVEL 1 BREAKFAST PRESS THE KEY TO BE PROGRAMMED PREVIOUS KEY ASSIGNMENT: LOC. 001 KEY TYPE CODE # DESCRIPTOR PLU 12345678901234 CHEESE BURGEREXT Key Assignment [S4-1-1]: Programming ﬁelds and related ﬂags. Field Descriptor KB LEVEL (DESCRIPTOR) CURRENT: (CODE #) NEW ASSIGNMENT:KEY LOC. KEY TYPE CODE # Key Code # Display KB Level Descriptor Current Key Descriptor Current Key Code # Physical Key Location pressed (Vertically counted from upper left. Default Explanation 12 x NEC RSenCounter 4000 Reference Manual 2350REF01 S-Mode S-Mode Menu Structure q Note 2: If PLU NO. is not found (= not registered), then prompt PLU# NOT FOUND! SELECT 1 2 TRY ANOTHER PLU # CREATE NEW PLU q q [1] The cursor will go to [S4-1-1] CODE # ﬁeld (blank ﬁeld). LINE 6 CODE # 0 [2] create a new INACTIVE PLU by this number and go to [S4-1-1] CODE# ﬁeld. LINE 6 CODE # NEW PLU 12345678901234 DOWNLOAD PROGRAMS [S5] S-MODE:DOWNLOAD PROGRAMS 1 SYSTEM SOFTWARE 1 2 3 4 2 SYSTEM CONFIGURATION 3 MEMORY ALLOCATION (COMMON COFIG. ONLY) 4 KEYBOARD INFORMATION 5 ALL OF ABOVE EXCEPT SYSTEM SOFTWARE q q q 1 2 3 q 4 System software is the Flash EPROM program. System conﬁguration in all programs in [S2] System Conﬁguration programming. Memory allocation (COMMON AREA) can be downloaded. If there is an allocation error such as a lack of memory at the downloaded station, then display “INCORRECT MEMORY ALLOCATION” error at the downloaded station. Master and/or Local Areas have to be manually allocated at the each station according to the system conﬁguration. [S5-1], [S5-2], [S5-3], or [S5-4] SYSTEM SOFTWARE [S5-1] S-MODE:SYSTEM SOFTWARE 1 SYSTEM WIDE 2 STATION GROUP 3 RANGE q Station list may be provided upon request. 2350REF01 NEC RSenCounter 4000 Reference Manual x 13 S-Mode S-Mode Menu Structure SYSTEM SOFTWARE-BY STATION GROUP [S5-1-2] S-MODE:SYSTEM SOFTWARE-STA. GROUP DOWNLOAD TO STATION GROUP (1-24) 00 SYSTEM SOFTWARE-BY RANGE [S5-1-3] S-MODE:SYSTEM SOFTWARE-RANGE DOWNLOAD TO STATION NUMBER: START (1-24) END (1-24) 00 00 INSTALLATION PROCEDURE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. STATION NUMBER ASSIGNMENT [S1]. (Boot ROM may hold only [S1] menu) In S-MODE, hold [1], [2], or [3] depending on communication speed for downloading system software from PC (RSConnect.exe) Download system software to Master Station through RSConnect.exe. Upon completion, turn off the power and turn on the power with [EXIT] key in S-Mode. SYSTEM CONFIGURATION [S2] SYSTEM WIDE FEATURE [S2-1] STATION GROUP [S2-2] (Not mandatory) STATION REGISTRATION [S2-3] (make all stations active to be downloaded) MASTER AND BACKUP ASSIGNMENT [S2-4] Connect each station. Download System Software from the Master station to satellite stations. a) At each station to be downloaded, hold [7] and turn the power on in S-Mode b) At each station to be downloaded, enter the station number with [ENTER], e.g. [0][2][ENTER] for the station number 2. c) At the master, perform Download System Software-All Stations [S5-1-1] to start downloading the System Software. EDIT MEMORY ALLOCATION [S3] KEY ASSIGNMENT [S4] (Not mandatory) DOWNLOAD SYSTEM CONFIGURATION TO STATIONS [S5-2] from the Master Station DOWNLOAD MEMORY ALLOCATION (COMMON AREA) TO STATIONS [S5-3] from the Master Station The memory requirement at each station is calculated based on System Conﬁguration [S2] accordingly. DOWNLOAD KEY BOARD INFORMATION [S5-4]. (Not mandatory) At each station perform Station Registration [S3] to configure Local and/or Masters accordingly. 12. 13. 14. 15. 16. 17. RUN THE SYSTEM TEST SOFTWARE 1. Hold [0] and turn the power on in S-MODE. 14 x NEC RSenCounter 4000 Reference Manual 2350REF01 S-Mode S-Mode Menu Structure INITIALIZATION [S6] 1 2 3 4 5 6 9 10 11 12 q q 1 CLEAR CLEAR CLEAR CLEAR CLEAR CLEAR RAM AND INSTALL DEFAULT PROGRAM TOTALS AND COUNTERS ORDER TRACKING,P.O.R., & PENDING ORDERS 1 PRODUCT PROJECTIONS TIME KEEPING CREDIT TRACKING FILES (LOGO) ON RECEIPT/CHECK MESSAGES FUNCTION KEYS KEY BOARD CLEAR BIT IMAGE INSTALL DEFAULT INSTALL DEFAULT INSTALL DEFAULT Pending orders include interrupted orders. Display the long message “INSTALLED” in the error message window after 10, 11, and 12. CLEAR RAM AND INSTALL DEFAULT PROGRAM [S6-1] CLEAR RAM AND INSTALL DEFAULT PROGRAM ARE YOU SURE? NO CLEAR TOTAL AND COUNTERS [S6-2] CLEAR TOTAL AND COUNTERS ARE YOU SURE? NO [S6-3] to [S6-9] q q [S6-3] to [S6-9] are same as above in format. Default value to the prompt is “NO” INSTALL DEFAULT MESSAGES [S6-10] 1 2 3 4 5 6 7 8 9 10 11 ALL MESSAGES SCREEN MESSAGE (SHORT) SCREEN MESSAGE (LONG) ERROR MESSAGE RECEIPT/CHECK SYSTEM MESSAGE RECEIPT/CHECK HEADER AND FOOTER CREDI CARD AGREEMENT MESSAGE (CHARGE) CREDIT CARD AGREEMENT MESSAGE (CREDIT) GUEST CHECK TRAIL MESSAGE KITCHEN PRINTER MESSAGE REPORT MESSAGE 2350REF01 NEC RSenCounter 4000 Reference Manual x 15 S-Mode S-Mode Menu Structure ALL MESSAGES [S6-10-1] q This will update all of 2 to 5. SCREEN SYSTEM DESCRIPTOR [S6-10-2] S-MODE:INSTALL DEFAULT SCREEN MESSAGE (SHORT) ENTER # TO ADD OR REPLACE (999 REPLACE AND ADD ALL) 999 RECEIPT/CHECK SYSTEM DESCRIPTOR [S6-10-5] 1 S-MODE:INSTALL DEFAULT RECEIPT/CHECK SYSTEM MESSAGE 2 ENTER # TO ADD OR REPLACE 3 (999 REPLACE AND ADD ALL) 4 5 999 RECEIPT/CHECK HEADER AND FOOTER [S6-10-6] CREDIT CARD AGREEMENT MESSAGE (CHARGE) [S6-10-7] CREDIT CARD AGREEMENT MESSAGE (CREDIT) [S6-10-8] GUEST CHECK TRAIL MESSAGE [S6-10-9] KITCHEN PRINTER MESSAGE [S6-10-10] REPORT MESSAGE [S6-10-11] 1 S-MODE:INSTALL DEFAULT REPORT MESSAGE 2 ENTER # TO ADD OR REPLACE 3 (999 REPLACE AND ADD ALL) 4 5 999 INSTALL DEFAULT FUNCTION KEYS [S6-11] 1 S-MODE:INSTALL DEFAULT FUNCTION KEYS 2 ENTER # TO ADD OR REPLACE 3 (999 REPLACE AND ADD ALL) 4 5 q 999 For those messages that require # will have its own unique record number to be accessed in the memory. INSTALL DEFAULT KEYBOARD [S6-12] q After the Default Keyboard Installation, it will display the message: “DEFAULT KEY BOARD INSTALLED”. 16 x NEC RSenCounter 4000 Reference Manual 2350REF01 S-Mode S-Mode Menu Structure SYSTEM PASSWORD [S7] S-MODE:SYSTEM PASSWORD ENTER YOUR SYSTEM PASSWORD SUPPORT PHONE # CONTACT 1 CONTACT 2 9999 ____________ ____________ ____________ Factory Default value is 9999 SYSTEM TEST [S8] q Hold [0] and turn power on in S-Mode. TEST PROGRAM 01.RAM NON DESTRUCTIVE 02.RAM WRITE FOR M.LOSS 03.RAM LOSS TEST 04.RS232C PORT 1 05.RS232C PORT 2 06.RS232C PORT 3 07.LAN 08.OPERATION DISPLAY 09.CUSTOMER DISPLAY 10.KEYBOARD 11.KEYLOCK SWITCH 12.REAL TIME CLOCK 13.CASH DRAWER A OPEN 14.CASH DROWER B OPEN 15.FLASH MEMORY 06/09/00(FRI) 20:06:55 16.EX-RAM NON DESTRUCTIVE 17.EX-RAM WRITE FOR M.LOSS 18.EX-RAM LOSS TEST 19.EX-RS232C PORT 4 20.EX-RS232C PORT 5 21.CARD READER – OPTION 22.CLERK KEY – OPTION 23. 24. 25. 26. 27.BUZZER 28.POWER LED 29.CHECK SUM 30. 2350REF01 NEC RSenCounter 4000 Reference Manual x 17 S-Mode S-Mode Menu Structure - For Your Notes - 18 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE P-MODE P-MODE MENU STRUCTURE P-MODE MENU STRUCTURE P-MODE: EDIT SYSTEM CONFIGURATION 1 EDIT SYSTEM CONFIGURATION 2 REPORT GROUPS AND TIME PERIODS 3 TAXES 4 SYSTEM OPTION 5 PLU 6 INVENTORY 7 MESSAGES 8 KEYBOARD SYSTEM 9 COUPON AND AUTO-COMBO 10 HUMAN RESOURCES 11 PERIPHERALS 12 TRAINING 13 UTILITY EDIT SYSTEM CONFIGURATION [P1] P-MODE: EDIT SYSTEM CONFIGURATION 1 SYSTEM WIDE FEATURE 2 STATION GROUP 3 STATION REGISTRATION 4 MASTER & BACKUP ASSIGNMENT 5 DOWNLOAD SYSTEM WIDE FEATURES [P1-1] P-MODE:SYSTEM WIDE FEATURE STORE ID # STORE NAME DECIMAL POINT (0-3) DECIMAL CHARACTER (0=".", 1=",") CURRENCY MARK CALENDAR FORMAT (0=M/D/Y, 1=D/M/Y, 2=Y/M/D) SYSTEM DATE SYSTEM DAY (0=SU,1=M,2=T,3=W,4=T,5=F,6=SA) SYSTEM TIME # OF NETWORK RETRIES # OF PRINTER RETRIES ORDER # SYSTEM (0=COMMON, 1=LOCAL) STARTING ORDER # TRACK1 # SYSTEM (0=AUTO, 1=MANUAL) TRACK2 # SYSTEM (0=AUTO, 1=MANUAL) (1/2) abcdefgh XXXXXXXXXXXX 9 9 XXX 9 MM/DD/YYYY 9 HH:MM 9 9 9 99999 9 9 0-1 0-1 P-MODE:SYSTEM WIDE FEATURE RECALL OWN TRACK # ORDER ONLY RSC. DOWNLOADS FILES TO MODEM STA ONLY (2/2) N N 2350REF01 NEC RSenCounter 4000 Reference Manual x 19 P-MODE P-MODE MENU STRUCTURE System Wide Features [P1-1]: Programming ﬁelds and explanations Field Descriptor STORE ID # STORE NAME DECIMAL POINT DECIMAL CHARACTER CURRENCY MARK CALENDAR FORMAT SYSTEM DATE SYSTEM DAY SYSTEM TIME 2 . $ M/D/Y 01/01/2000 0 00:00 Currency Mark Deﬁne which calendar format to use. Enter the system date Enter or assign the system day Enter the system time. (13:00 = 1:00 PM) Internally 4 digits 00:00 is a valid time Number of retries to attempt before prompt. Number of retries to attempt before prompt. System wide common order # system or not Works in conjunction with Z Tran. OPTION ﬂag in system option-closing OPTION. Local= Number system uses the station number + last 3 digit of this number. Default 0 Explanation 8 character alpha/numeric 12 character alpha/numeric Deﬁne the number of digits after the decimal point for amount # OF NETWORK RETRY # OF PRINTER RETRY ORDER # SYSTEM STARTING ORDER # 2 2 LOCAL 00001 TRACK 1 # SYSTEM TRACK 2 # SYSTEM RECALL OWN TRACK # ORDER ONLY RSC. DOWNLOADS FILES TO MODEM STA ONLY AUTO INCR. MANUAL ENTRY NO If YES, then a person who stored and the person who recalls the order must match. Order will be retrieved in FIFO unless designated. If YES, then the PC download will automatically download programs to all other stations in system. NO 20 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE STATION GROUP [P1-2] P-MODE:STATION GROUP # DESCRIPTOR 99 ABCDEFGHIJKL q 99=1-24 Maximum of 24 Station Groups are available Station Group [P1-2]: Programming ﬁelds and explanations Field Descriptor Default 1 STA GRP 1 Explanation STATION GROUP # STATION GROUP DESCRIPTOR # DESCRIPTOR [1][ENTER] or [ENTER] STATION 1 [P1-2-1] P-MODE:STATION GROUP STATION GROUP # (1-24) STATION GROUP DESCRIPTOR 99 XXXXXXXXXXXX 1-24 Station 1 [P1-2-1]: Programming ﬁelds and explanations Field Descriptor STATION GROUP # STATION GROUP DESCRIPTOR Default 1 STA GRP 1 Explanation Give a descriptor to this group STATION REGISTRATION [P1-3] P-MODE:STATION REGISTRATION # DESCRIPTOR ACTIVE 99 ABCDEFGHIJKL Y q TYPE SEND TO XXXXXXXXXX ->99 99=1-24 Station 16-24 are on the second page. Station Registration [P1-3]: Programming ﬁelds and explanations Field Descriptor # STATION DESCRIPTOR TYPE SEND TO Default 1 ‘STATION 1’ TABLE SERVICE 0 Explanation Allow entering number to access the station. A station number to which this Station send DT order. [1][ENTER] or [ENTER] 2350REF01 NEC RSenCounter 4000 Reference Manual x 21 P-MODE P-MODE MENU STRUCTURE STATION 1 [P1-3-1] * STATION 1 TO 24 are in the same format. P-MODE:STATION REGISTRATION STATION # (1-24) STATION DESCRIPTOR STATION GROUP (1-24) ACTIVE STARTING TRANSACTION # (1-9999) DEFAULT ORDER DESTINATION (0=NO DEST. 1=EATIN,2=TAKEOUT,3=TRK1,4=TRK2,5=DT) STATION TYPE (0=TS,1=QS CNTR) 2=DT OT, 3=DT CSHR, 4=DT OT CSHR) SEND DT ORDER TO STATION (0-24) [SERVE] BY THIS STA. STOPS SVC.TIMER ENFORCE SERVE/PARK ENTRY ENFORCE STORE TRACKING SCREEN SAVER IN SEC (0-999) # OF BEEPS IN PRINTER ERROR DISABLE ERROR TONE DISABLE KEY TOUCH TONE 99 XXXXXXXXXXXX 99 Y 9999 9 9 99 Y Y Y 999 99 N N Station 1 [P1-3-1]: Programming ﬁelds and explanations Field Descriptor STATION # STATION DESCRIPTOR STATION GROUP ACTIVE STARTING TRANSACTION # DEFAULT ORDER DESTINATION STATION TYPE Default 1 ‘STATION 1’ 1 Y 0001 0 TABLE SERVICE Explanation Allow entering number to access another station. The report of this station will be in this group. Used in conjunction with the closing OPTION ﬂag. This deﬁnes the Screen format DT OT is same as QS CNTR except DT OT enforce [SEND DTO] and STOR/ RECALL are N/A. This is not available in TBL SVC. Deﬁne the destination Station # where the order sent to. SEND DT ORDER TO SATION SERVE BY THIS STA. STOPS SVC. TIMER ENFORCE SERVE/PARK ENTRY ENFORCE STORE TRACKING SCREEN SAVER IN SEC # OF BEEPS IN PRINTER ERROR DISABLE ERROR TONE DISABLE KEY TOUCH TONE N0 If Y, then this station’s {SERVE} key to bump off the DT Order will be used to stop DT Service Timer Must enter either SERVE or PARK key before starting the new order. Tender key entry is prohibited if this is Y NO NO 180 0-99 N N Enables or disables tone when error condition is encountered. Disables beeps when keys are depressed. 22 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE MASTER AND BACK UP ASSIGNMENT [P1-4] P-MODE:MASTER & BACK UP ASSIGNMENT SYSTEM: MASTER STATION # (1-24) BACK UP STATION # (0-24) TRACKING: MASTER STATION # (1-24) BACK UP STATION # (0-24) 99 99 99 99 Master and Back Up Assignment: Programming ﬁelds and explanations Field Descriptor SYSTEM : MASTER STATION # BACK UP STATION # TRACKING: MASTER STATION # BACK UP STATION # 1 0 The number of the order track ﬁle. Credit Card Tran. File No Backup for Default 1 0 Holds Clock Date, Z1 & Z2 Prepoll Area, and Closed Transaction File (TBD) No Backup for Default Default Explanation DOWNLOAD SYSTEM CONFIGURATION [P1-5] [P1-5] is the same as DOWNLOAD APPLICATION PROGRAMS BY STATION GROUP [P13-1-2] / [P12-3] on page 159. 2350REF01 NEC RSenCounter 4000 Reference Manual x 23 P-MODE P-MODE MENU STRUCTURE REPORT GROUPS AND TIME PERIODS [P2] P-MODE :REPORT 1 MAJOR GROUP 2 SUB GROUP 3 PRODUCT MIX 4 TIME PERIOD 5 TIME PERIOD GROUPS AND TIME PERIODS GROUP : AUTO CONFIGURATION : MANUAL CONFIGURATION MAJOR GROUP [P2-1] MAJOR GROUP 1/7 –7/7 (Maximum) P-MODE:MAJOR GROUP # DESCRIPTOR 99 ABCDEFGHIJKL ON RCPT. YES ON T.P. REPORT YES 99=1-99 Major Group [P2-1]: Programming ﬁelds and explanations Allocatable to Max 99 groups Field Descriptor # DESCRIPTOR ON RCPT. ON T.P. REPORT SALES REPORT Default 1 Explanation Enter the product Major Group number to access. Major Group descriptor Y/N If Y, then this Major Group will print on the Receipt If Y, then this Major Group will print on the Time Period Report 0-9 Reﬂect on Cashier Rep. & Cashier Sales Rep. [ENTER] MAJOR GROUP RECORD [P2-1-1] P-MODE:MAJOR GROUP MAJOR GROUP # DESCRIPTOR ON RECEIPT PRINT ON THE TIME PERIOD REPORT 99 XXXXXXXXXXXX Y Y Major Group Record [P2-1-1]: Programming ﬁelds and explanations Allocatable to Max 99 groups Field Descriptor MAJOR GROUP # DESCRIPTOR ON RECEIPT PRINT ON THE TIME PERIOD REPORT MAJ GRP 1 N N Print Major Group on the receipt Reﬂect this group on the Time Period Report or not Default Explanation Enter number to jump to another Major Group record 24 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE SUB GROUP [P2-2] Window 1 Page 1/63 – 63/63 (Maximum 999 Groups) P-MODE:SUB GROUP # DESCRIPTOR 999 ABCDEFGHIJKL TO MAJ GRP. 01 XXXXXXXXXXXX SALES REPORT 9 999=MEMORY ALLOC. SALES REPORT=0-9 Sub Group [P2-2]: Programming ﬁelds and explanations Allocatable to Max 999 groups Field Descriptor # DESCRIPTOR TO MAJ GRP. SALES REPORT Maj Grp. number Reporting to Maj Grp.’s descriptor Reporting to Reﬂect on Cashier Rep.& Cashier Sales Rep. Default 1 Explanation Enter the product Sub Grp.number to access. [1][ENTER] SUB GROUP [P2-2-1] P-MODE:SUB GROUP SUB GROUP # DESCRIPTOR REPORT TO MAJOR GROUP REPORT TO CSHR/SVR SALES REPORT (0-9,0=NO REP) 999 XXXXXXXXXXXX 99 9 Sub Group [P2-2-1]: Programming ﬁelds and explanations Allocatable to Max 999 groups Field Descriptor SUB GROUP # DESCRIPTOR REPORT TO MAJOR GROUP REPORT TO CSHR/SVR SALES REPORT SUB GRP 1 1 0 Enter the sales report number this group will report to. The sales report descriptors are programmed in #119-127, Report Messages, in P-Mode. Default Explanation Enter another sub group number to access from here. 2350REF01 NEC RSenCounter 4000 Reference Manual x 25 P-MODE P-MODE MENU STRUCTURE PRODUCT MIX GROUP [P2-3] Window 1(Maximum 99 Groups) P-MODE:PRODUCT MIX GROUP # DESCRIPTOR 99 ABCDEFGHIJKL PIECES 88 UNIT /XXXX Product Mix Group [P2-3]: Programming ﬁelds and explanations Allocatable to Max 99 groups Field Descriptor # DESCRIPTOR PIECES UNIT Default 1 Explanation Enter the product mix group number to access. “/” + Unit descriptor [1=PRODUCT MIX GROUP # 1][ENTER] PRODUCT MIX GROUP [P2-3-1] P-MODE:PRODUCT MIX GROUP PRODUCT MIX GROUP # DESCRIPTOR PIECE PER UNIT UNIT DESCRIPTOR 99 XXXXXXXXXXXX 999 XXXX Product Mix Group [P2-3-1]: Programming ﬁelds and explanations Allocatable to Max 99 groups Field Descriptor PRODUCT MIX GROUP # DESCRIPTOR PIECE PER UNIT UNIT DESCRIPTOR PROD MIX GRP 1 Default Explanation Enter number to access another record. PROD. MIX 1 (to 255) Forms quantity per whole unit. 4 characters descriptor. 26 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE TIME PERIODS AUTO CONFIGURATION [P2-4] P-MODE:TIME PERIOD AUTO CONFIGURATION TIME PERIOD BY EVERY (15,30,60MIN.) STARTING TIME FROM (HH:00) ENABLE AUTO CONFIGURATION 99 HH:00 Y HH in 24 hour clock Time Periods Auto Conﬁguration [P2-4]: Programming ﬁelds and explanations Allocatable to Max 99 groups Field Descriptor TIME PERIOD BY EVERY STARTING TIME FROM ENABLE AUTO CONFIGURATION Default 00 00:00 N Explanation System will conﬁgure the time period such as 06:00 to :29 …and etc. TIME PERIOD BY MANUAL CONFIGURATION [P2-5] MAX 108 PERIODS PAGE1/9 –9/9 P-MODE:MANUAL CONFIGURATION 1 2 3 4 5 6 7 8 9 10 11 12 q q FROM FROM FROM FROM FROM FROM FROM FROM FROM FROM FROM FROM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM TO TO TO TO TO TO TO TO TO TO TO TO HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM HH:MM EXCL. FROM TOTAL N N N N N N N N N N N N (1/9)-(Check Memory Allocation) Accept 00:00 Hour in 24 hour clock. If both FROM and TO time is 00:00, then this period will be ignored. Time Period by Manual Conﬁguration [P2-5]: Programming ﬁelds and related ﬂags Field Descriptor Default Explanation Max 108 periods 00:00 00:00 N Starting time of this Period Ending time of this Period. If “Y”, then do not include in the total at the end of the report. 999 FROM TO EXCLU. FROM TOTAL 2350REF01 NEC RSenCounter 4000 Reference Manual x 27 P-MODE P-MODE MENU STRUCTURE TAXES [P3] P-MODE 1 TAX 2 TAX 3 TAX : CONFIGURATION TABLE PROGRAMMING OPTION TAX CONFIGURATION [P3-1] P-MODE:TAX CONFIGURATION # DESCRIPTOR TYPE 9 ABCDEFGHIJKL TABLE 1 RATE(%) 99.99 9=1-6 Tax Conﬁguration [P3-1]: Programming ﬁelds and explanations Field Descriptor # DESCRIPTOR TYPE RATE (%) Shown only on TYPE=TAX % Default 1 Explanation Enter the TAX # TAX 1 [P3-1-1] TAX TYPE = [TAX %] P-MODE:TAX CONFIGURATION TAX 9 DESCRIPTOR TAX TYPE (0=TAX %,1=TABLE1,2=TABLE2) TAX RATE (%) ADD ON OR VAT (0=ADD ON,1=VAT) MAXIMUM NON TAXABLE AMOUNT PRINT TAX PRINT ZERO TAX q XXXXXXXX 9 99.99 9 99.99 Y Y 9=TAX No *1 *1 *2 *2 q *1 = Skip on TAX TYPE=1 and 2 Previously programmed ﬁgures in ﬁelds may remain as it is when TAX TYPE is changed from 0 to 1, however it will be ignored. *2 = These ﬂags are used when SYSTEM OPTION –RECEIPT FORMAT ; ‘PRINT ONLY SUM OF ALL TAXES=N’ 28 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE Tax 1 [P3-1-1]: Programming ﬁelds and related ﬂags. Field Descriptor TAX 9 DESCRIPTOR TAX TYPE TAX RATE (%) ADD ON OR VAT MAXIMUM NON-TAXABLE AMOUNT PRINT TAX 0 Y 0 0.00 0 Skip on TAX TYPE=1,2 Default Explanation Show selected Tax # PRINT ZERO TAX N TAX TABLE PROGRAMMING [P3-2] P-MODE:TAX TABLE # DESCRIPTOR 1 ABCDEFGHIJKL 2 ABCDEFGHIJKL TAX TABLE 1 TAX TABLE 2 Tax Table [P3-2]: Programming ﬁelds and explanations Field Descriptor # DESCRIPTOR Default 1 Explanation Enter the TAX Table # [1][ENTER] or [ENTER] TAX TABLE PROGRAMMING [P3-2-1] P-MODE:TAX TABLE 1 PROGRAMMING FIRST # 9999 SECOND # 99 MAX. NON-TAXABLE SALES AMOUNT 99.99 FIRST TAX 99.99 NON-REPEAT BREAK; 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 (1/2) 9=TAX TABLE # 1 or 2 Cursor moves from left to right 2350REF01 NEC RSenCounter 4000 Reference Manual x 29 P-MODE P-MODE MENU STRUCTURE P-MODE:TAX TABLE 9 PROGRAMMING FIRST # SECOND # MAX. NON-TAXABLE SALES AMOUNT FIRST TAX REPEAT BREAK; 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 (2/2) 9999 99 99.99 99.99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 99 Tax Table [3-2-1]: Programming ﬁelds and related ﬂags. Field Descriptor FIRST # SECOND # MAX. NON-TAXABLE SALES AMOUNT FIRST TAX NON-REPEAT BREAK: REPEAT BREAK Default 0000 00 00.00 00.00 00 00 Explanation Sales amount under this will not be taxed. Tax amount under this will not be collected. 86 ﬁelds provided. 86 ﬁelds provided. TAX OPTION [P3-3] P-MODE:TAX OPTION ROUND FACTOR (01,50,99) NET PLU BY VAT 99 N 01/50/99 Tax Option [P3-3]: Programming ﬁelds and related ﬂags. Field Descriptor ROUND FACTOR NET PLU VAT Default 50 Explanation If Y, then subtract VAT amount from each PLU sales amount in PLU Report 30 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE SYSTEM OPTION [P4] P-MODE :SYSTEM OPTION 1 GLOBAL OPTION 2 TRANSACTION OPTION 3 TABLE SERVICE OPTION 4 DRAWER & TENDER OPTION 5 PRINT FORMAT AND OPTION 6 CLOSING OPTION 7 DISPLAY OPTION 8 SCREEN CONFIGURATION GLOBAL OPTION [P4-1] P-MODE:SYSTEM OPTION-GLOBAL OPTION CASHIER/SERVER(0=POP UP,1=STAY DOWN) ENFORCE SECRET CSHR/SVR SIGN ON CODE AUTO QUIT AFTER STORE/SVC./TENDER(SEC) PRICE LEVEL (0=POP UP,1=STAY DOWN) KEYBOARD LEVEL(0=POP UP,1=STAY DOWN) CONSOLIDATION LIKE ITEMS SORT ITEMS TO R/K/D PRINT AND DISPLAY ITEM QTY OF "1" AUTO STORE OPEN TRANS.(SEC) RUSH TIME 1 FOR ORDER (SEC) MGR. REQ. TO CANCEL PRINT q q q 9 N 99 1 1 Y Y Y 999 999 N *3 *1 *1 *2 *1 0=disabled *2 It will ask “1. RETRY 2. BACK-UP 3. CANCEL PRINT” In taking Z, if ‘CANCEL PRINT’ is selected, then do not reset Z area. *3 Condiment KPG must be set to “0” to follow the main item in sorting to KP Items will be sorted after SEND DTO, TENDER, SERVICE, or STORE. 2350REF01 NEC RSenCounter 4000 Reference Manual x 31 P-MODE P-MODE MENU STRUCTURE Global Option [P4-1]: Programming ﬁelds and related ﬂags. Field Descriptor CASHIER/SERVER ENFORCE SECRET CSHR/SVR SIGN ON CODE X OUT CODES ENTERED ON DISPLAY AUTO QUIT AFTER STORE/SVC./ TENDER(SEC) PRICE LEVEL KEYBOARD LEVEL CONSOLIDATION LIKE ITEMS SORT ITEMS TO R/K/D * No Item Sort to Tran. Log PRINT AND DISPLAY ITEM QTY. OF “1” AUTO STORE OPEN TRANS. 0 1 1 Y Y Y 0 Store an order after the programmed time. It will be brought up upon sign on by the corresponding cashier or server. After the number of programmed seconds on an order, it will indicate on the order. If =Y, then in printer error, require a MGR to abort print job. Consolidated an item by one item delay method if this ﬂag =Y. Items are sorted by sort key set in PLU at Service/store/send to/tender 0=disabled Default 1 N Explanation If Y, then enforce [CSHR CODE] “SECRET CODE” [CSHR CODE] RUSH TIME 1 FOR ORDER MGR. REQ. TO CANCEL PRINT 0 N • Default 0= Disabled 32 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE TRANSACTION OPTION [P4-2] P-MODE:SYSTEM OPTION-TRANSACTION OPTION ENFORCE : SBTL KEY ENTRY ORDER DESTINATION AT BEGINNING OF TRANSACTION # KEY ENTRY TENT # ENTRY NRGT CALCULATION BY STATION ALLOW : ORDER DISC./SURCHARGE BEFORE SBTL MODIFY DRIVE THRU ORDER [SERVE ORDER] TO BUMP KVS ORDER VOIDS AFTER SUBTOTAL Y Y Y Y Y Y Y Y N N Transaction Option [P4-2]: Programming ﬁelds and related ﬂags. Field Descriptor ENFORCE: SBTL KEY ENTRY N If=Y, then SBTL key entry required before SERVICE, STORE, SEND, TENDER, ORDER DISC, SURCHARGE, or ROUND, however exceptions can be made in the ALLOW section below. Default Explanation ORDER DESTINATION AT BEGINNING OF TRANSACTION # KEY ENTRY TENT # ENTRY NRGT CALCULATION BY STATION N N N N Y If=Y, then Trans. Void Amount can not draw its station’s Gross Sales negative. If this ﬂag is set to "N", then “DAILY GT” in the balancing section will not be a sum of absolute values. DAILY GT will represent a sum of all accounts in this section. ALLOW : ORDER DISC./SURCHARGE BEFORE SBTL MODIFY DRIVE THRU ORDER [SERVE ORDER] TO BUMP KVS ORDER VOIDS AFTER SUBTOTAL Y ORDER DISC OR SURCHARGE is allowed without SBTL key. Drive Through order after sent can not be modiﬁed. Y N N If=N, no voids are allowed after selection of subtotal. 2350REF01 NEC RSenCounter 4000 Reference Manual x 33 P-MODE P-MODE MENU STRUCTURE TABLE SERVICE OPTION [P4-3] P-MODE:SYSTEM OPTION-TABLE SERVICE OPTION TRANSFER A GUEST CHECK AUTOMATICALLY ENFORCE # GUESTS ENTRY ON GUEST CHECK ALLOW MULT. TABLES WITH SAME TABLE # DISPLAY ALL CHECKS WITH SAME TABLE # CONSOLIDATE ITEMS AFTER SERVICE N N N N N Table Service Option [P4-3]: Programming ﬁelds and related ﬂags. Field Descriptor TRANSFER A GUEST CHECK AUTOMATICALLY ENFORCE # GUESTS ENTRY ON GUEST CHECK ALLOW MULT. TABLES WITH SAME TABLE# DISPLAY ALL CHECKS WITH SAME TABLE # CONSOLIDATE ITEMS AFTER SERVICE Default N N Explanation Check will be transferred to a person who picks it up. If this ﬂag says Y, then it will prompt you to enter GUEST # entry when a guest check is created. Check can be opened under the same Table # however under a different check# When table # function key is used, display will present all open checks with the same table number. N N N 34 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE DRAWER AND TENDER OPTION [P4-4] P-MODE:SYSTEM OPTION-DRAWER & TENDER OPTION CASH IN DRAWER AMOUNT LIMIT OPEN DRAWER TIME LIMIT IN SEC MGR REQUIRED FOR SALES OVER DISABLE TRANS. IF DRAWER OPEN ENFORCE BEGIN CASH ENTRY (0=AFTER FINAN'L Z1, 1=AFTER SHIFT Z1, 2=AFTER CSHR Z1, 3=NO COMPULSORY) ENFORCE AMOUNT TENDER ALLOW UNDER TENDER MGR CONTROL ON: NEGATIVE BALANCE SALES ZERO BALANCE SALES CHARGE TIP AUTO DEDUCT FROM CASH OPEN DRAWER ON ZERO BALANCE SALES OPEN DRAWER AFTER FINANCIAL REPORT (0:X 1:Z 2:X or Z, 3:NO) 9999999.99 99 9999999.99 Y 0 Y Y Y Y Y Y 9 Drawer and Tender Option [P4-4]: Programming ﬁelds and related ﬂags. Field Descriptor CASH IN DRAWER AMOUNT LIMIT OPEN DRAWER TIME LIMIT IN SEC MGR REQUIRED FOR SALES OVER Default 0.0 0 0.0 Explanation If over, then ‘MANAGER REQUIRED’ which can be overridden in X DISABLE TRANS. IF DRAWER OPEN ENFORCE BEGIN CASH ENTRY N NO COMPLUSORY If Financial Z1, then prompt “Enter Begin Cash” to the ﬁrst cashier signed on to Drawer A and B after Financial Z1 is taken for this Station. ENFORCE AMOUNT TENDER ALLOW UNDER TENDER MGR CONTROL ON: NEGATIVE BALANCE SALES ZERO BALANCE SALES CHARGE TIP AUTO DEDUCT FROM CASH OPEN DRAWER ON ZERO BALANCE SALES OPEN DRAWER AFTER FINANCIAL REPORT Y N Y N N N 2 2350REF01 NEC RSenCounter 4000 Reference Manual x 35 P-MODE P-MODE MENU STRUCTURE PRINT FORMAT AND OPTION [P4-5] P-MODE :SYSTEM OPTION-PRINT OPTION & FORMAT 1 RECEIPT OPTION 2 RECEIPT FORMAT 3 KITCHEN REQUISITION 4 REPORT 5 TRANSACTION LOG 6 SYSTEM LOG 7 KEY STROKE HISTORY 8 CTS (CLOSED TRANS. SUMMARY) RECEIPT OPTION [P4-5-1] 1P-MODE:SYSTEM OPTION-RECEIPT OPTION 2 PRINT RECEIPT 3 ALLOW TO PRINT MULTIPLE RECEIPTS 4 PRINT RECEIPT AFTER STORE 5 PRINT RCPT. AFTER AUTO/CLERK INTERRUPT 7 PRINT SPLIT RECEIPT 8 Y Y Y Y N Receipt Option [P4-5-1]: Programming ﬁelds and related ﬂags. Field Descriptor RECEIPT OPTION: PRINT RECEIPT N If ‘N’= No automatic printing of receipt, still can be printed by RECEIPT ISSUE key Default Explanation ALLOW TO PRINT MULTIPLE RECEIPT PRINT RECEIPT AFTER STORE PRINT RCPT. AFTER AUTO/ CLERK INTERRUPT PRINT SPLIT RECEIPT Y Y N N If=Y, then print a receipt in split payment, If =N, do not print receipt until ﬁnal payment is complete. RECEIPT FORMAT [P4-5-2] P-MODE:SYSTEM OPTION-RECEIPT FORMAT PRINT ORDER # PRINT ORDER # IN BOLD PRINT MERCHANDISE SUBTOTAL PRINT TRANSACTION # PRINT STATION # PRINT TIME PRINT EMPLOYEE # PRINT SVR/CASHIER'S NAME PRINT "T" FOR TAX AT THE END OF PLU PRINT ONLY SUM OF ALL TAXES PRINT TAX, IF VAT PRINT TAXABLE MERCHANDISE CNT & TOTAL PRINT NON TXBL MERCHANDISE CNT & TOTAL q Y Y Y Y Y Y Y Y Y Y Y Y Y *1 *1 Available when PRINT ONLY SUM OF ALL TAXES=N 36 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE Receipt Format [P4-5-2]: Programming ﬁelds and related ﬂags. Field Descriptor Default Explanation RECEIPT CONFIGURATION: PRINT ORDER # PRINT ORDER # IN BOLD PRINT MERCHANDISE SUBTOTAL PRINT TRANSACTION # PRINT STATION # PRINT TIME PRINT EMPLOYEE # PRINT SVR/CASHIER’S NAME PRINT “T” FOR TAX AT THE END OF PLU PRINT ONLY SUM OF ALL TAXES Y Y Y Y Y Y Y Y N Y If Y, then print only TAX TOTAL, otherwise print both individual TAX 1-6 and TAX TOTAL PRINT TAX, IF VAT PRINT TAXABLE MERCHANDISE CNT & TOTAL PRINT NON TXBL MERCHANDISE CNT & TOTAL N N N Tally the taxable item count and amount separately for printing. Same as above on non-taxable items. KITCHEN REQUISITION [P4-5-3] P-MODE:SYSTEM OPTION-KITCHEN REQUISTION KP OPTION: PRINT ALL KP GROUP ITEMS AT KP SEND ORDER TO KP AT INTERRUPT KP FORMAT: # OF KP LINE FEED PRINT IN DOUBLE HEIGHT PRINT KP HEADER/FOOTER ON KP PRINT SEPARATOR BY MAIN ITEM? PRINT ITEMS BY SEAT # PRINT TOTAL QTY PRINT TOTAL AMOUNT PRINT TOTAL TAX PRINT PRICE ON OPEN ITEM PRINT PRICE ON ITEMS PRINT CASHIER NAME IN BOLD q Y Y 9 Y Y Y Y Y Y Y Y Y Y *1 * 1 If there is any item directed to the printer, this printer will print out all the items that are directed to other Kitchen Printers too. 2350REF01 NEC RSenCounter 4000 Reference Manual x 37 P-MODE P-MODE MENU STRUCTURE Example KPG# 1 2 3 4 5 PLU# 01 02 03 04 05 to Printer # 1 1 1 2 4 KPG# 1 2 4 5 0 Sales PLU 01/02/04/05 At the printer Printer # 1 prints out : PLU 01/02/04 Printer # 2 prints out : None Printer # 4 prints out : PLU 01/02/04 Kitchen Requisition [P4-5-3]: Programming ﬁelds and related ﬂags. Field Descriptor KP OPTION: PRINT ALL KP GROUP ITEMS AT KP SEND ORDER TO KP AT INTERRUPT KP FORMAT: # OF KP LINE FEED PRINT IN DOUBLE HEIGHT PRINT KP HEADER/FOOTER ON KP PRINT SEPARATOR BY MAIN ITEM? PRINT ITEMS BY SEAT # PRINT TOTAL QTY PRINT TAX TOTAL PRINT TOTAL AMOUNT PRINT PRICE ON OPEN ITEM N N N N N Y If the item is open item, price information on the item will be transmitted to KP for a cook’s reference. Count Main Item only Programmable in KP SYSTEM DESCRIPTOR 6 N Print items in double height. N N Send items to KP automatically at interrupt. Default Explanation PRINT PRICE ON ITEMS PRINT CASHIER NAME IN BOLD N Y 38 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE REPORT [P4-5-4] P-MODE:SYSTEM OPTION-REPORT INACTIVE TOTALS ON REPORTS: FINANCIAL AND CASHIER REPORT ITEM/PLU SUB/MAJOR/PRODUCT MIX GROUP TIME PERIOD COUPON TIME & ATTENDANCE OTHER REPORTS NON RESET GT & GROSS TOTAL ON Z NON RESET GT & GROSS TOTAL ON X REPORT ORDERS AS #GUEST ON T.P. RPT. PRINT TPMH INSTEAD OF SPMH PRINT ONLY TOTAL ON P.M.G. REPORT ADD WT. TO COUNT TOTAL OF SALES RPT. CUT CASHIER REPORT BY CASHIER CUT STRING REPORT BY REPORTS PRINT PLU # ON SALES REPORTS Y Y Y Y Y Y Y Y Y Y Y Y N Y N Y Report [P4-5-4]: Programming ﬁelds and related ﬂags. Field Descriptor INACTIVE TOTALS ON REPORTS: FINANCIAL AND CASHIER REPORT ITEM/PLU SUB/MAJOR/PRODUCT MIX GROUP TIME PERIOD COUPON TIME & ATTENDANCE OTHER REPORTS NON RESET GT & GROSS TOTAL ON Z NON RESET GT & GROSS TOTAL ON X REPORT ORDERS AS #GUEST ON T.P. RPT. PRINT TPMH INSTEAD OF SPMH PRINT ONLY TOTAL ON P.M.G. REPORT ADD WT. TO COUNT TOTAL OF SALES RPT. CUT CASHIER REPORT BY CASHIER CUT STRING REPORTS BY REPORT PRINT PLU # ON SALES REPORTS N N N N N Y N N N Y N Y N Y N N Default Explanation 2350REF01 NEC RSenCounter 4000 Reference Manual x 39 P-MODE P-MODE MENU STRUCTURE TRANSACTION LOG [P4-5-5] P-MODE:SYSTEM OPTION-TRANSACTION LOG ENABLE FIFO WHEN THE LOG AREA IS FULL PRINT ONLY TRANSACTION WITH NEG. ITEM PRINT STORE RECEIPT ON TRANS. LOG PRINT SVC. WITH PRINT ON TRANS. LOG PRINT SVC. NO PRINT TO TRANS. LOG N Y Y Y Y Transaction Log [P4-5-5]: Programming ﬁelds and related ﬂags. Field Descriptor ENABLE FIFO WHEN THE LOG AREA IS FULL PRINT ONLY TRANSACTION WITH NEG. ITEM PRINT STORE RECEIPT ON TRANS. LOG PRINT SVC. WITH PRINT ON TRANS. LOG PRINT SVC NO PRINT TO TRANS. LOG Default N N Explanation If =Y, then overwrite area in FIFO manner. If = N, then Suspend sales till Z is taken Void, ERR-CORR. Negative PLU, Refund, CPN, Cancel, Trans. Void, Item Disc. Order Disc, Promo, Waste, Auto-Combo, PRICE O/R If Y, then log store receipt on STORE KEY If Y, then log information by SERVICE W/ PRINT N N N 40 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE SYSTEM LOG [P4-5-6] P-MODE:SYSTEM OPTION-SYSTEM LOG ENABLE FIFO WHEN THE LOG AREA IS FULL X REPORTS ON SYSTEM LOG Z REPORTS ON SYSTEM LOG PRINT EMPLOYEE FILE CHANGE PRINT EMPLOYEE PAY RATE CHANGE PRINT EMPLOYEE TIME CLOCK EDIT PRINT CLOCK IN/OUT DATA PRINT PAID OUT/RCVD ACCOUNT RECEIPT PRINT NO SALE ON SYSTEM LOG PRINT PLU PRICE CHANGE PRINT TIPS PAID OUT q q N Y Y Y Y Y Y Y Y Y Y Preamble and post amble will not be printed on journal, however STORE ID# and Store descriptor will be printed. Journal will be printed in key sequence format. System Log [P4-5-6]: Programming ﬁelds and related ﬂags. Field Descriptor Default N N N Y Y Y Y Y Y Y Y Print out the price change who, when, on what, old price, new price. Explanation If =Y, then overwrite area in FIFO manner. If = N, then Suspend sales till Z is taken ENABLE FIFO WHEN THE LOG AREA IS FULL X REPORTS ON SYSTEM LOG Z REPORTS ON SYSTEM LOG PRINT EMPLOYEE FILE CHANGE PRINT EMPLOYEE PAY RATE CHANGE PRINT EMPLOYEE TIME CLOCK EDIT PRINT CLOCK IN/OUT DATA PRINT PAID OUT/RCVD ACCOUNT RECEIPT PRINT NO SALE ON SYSTEM LOG PRINT PLU PRICE CHANGE PRINT TIPS PAID OUT 2350REF01 NEC RSenCounter 4000 Reference Manual x 41 P-MODE P-MODE MENU STRUCTURE KEY STROKE HISTORY [P4-5-7] 1P-MODE:SYSTEM OPTION-KEY STROKE HISTORY 2 ENABLE FIFO WHEN ALLOC. AREA IS FULL 3 Y Key Stroke History [P4-5-7]: Programming ﬁelds and related ﬂags. Field Descriptor ENABLE FIFO WHEN ALLOC. AREA IS FULL Prog. Field or Selection Field by / Y/N Field Lnx. 1 Data Type Flg. Default Y Explanation CTS (CLOSED TRANSACTION SUMMARY) [P4-5-8] 1P-MODE:SYSTEM OPTION-CTS (CLOSED TRANS. SUMMARY) 2 ENABLE KEY HISTORY TRACKING 3 ENABLE FIFO WHEN STATION CTS IS FULL Y Y CTS [P4-5-8]: Programming ﬁelds and related ﬂags. Field Descriptor ENABLE KEY HISTORY TRACKING ENABLE FIFO WHEN STATIN CTS IS FULL Prog. Field or Selection Field by / Y/N Y/N Field Lnx. 1 1 Data Type Flg. Flg. Default N N Explanation N = ’POLL CTS FROM SYS MASTER [129]’ message when remaining area Target PLU# = 13000 Small Coke *7 A Condiment in the Condiment Table will not call TLU, Linked PLU, MLU Tables. It may call another condiment table or chain, however it will not hold the control of the previous Condiment Table. q q 48 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE Create or Edit PLU (P5-1-1-1): Programming ﬁelds and related ﬂags. Field Descriptor PLU# DESCRIPTOR ACTIVE TEXT COLOR PLU TYPE PLU PPTY # PRICE PRICE/HALO PRICE TBL # -PLU PRICE COST LINKED TBL LINKED TBL # ALLOW [CONDIMENT] FUNCTION KEY MLU# 1 MLU# 2 RECEIPT DESCRIPTOR # N 0 0 0 Points to 24 Character Receipt Descriptor record number and displays its descriptor. Y (Black) 15 0 1 0 (PRESET) 0.00 0 N 0.00 0 IF LINKED COND. TYPE-TABLE, display condiment table name after this. Holds number for one of above tables. Skip on LINKED TBL=1,2,3,4Å@ Normal Points to PLU Property that this PLU belongs to. HALO=OPEN HIGH AMOUNT LOCK OUT SKIP ON PRICE=2 SKIP ON PRICE=0,1 No title for this ﬁeld. If=N, then this PLU can not be sold. Default Explanation 2350REF01 NEC RSenCounter 4000 Reference Manual x 49 P-MODE P-MODE MENU STRUCTURE CREATE PLU BY RANGE [P5-1-2] P-MODE:CREATE PLU BY RANGE COPY # 12345678901234 ABCDEFGHIJKLMNOP TO # 12345678901234 - # 12345678901234 CREATE PLUs EVERY 999 ARE YOU SURE TO PROCEED? Y === ORIGNAL PLU INFORMATION === PLU # 99999999999999 DESCRIPTOR XXXXXXXXXXXXXXX X ACTIVE Y TEXT COLOR (0-15) 99 PLU TYPE (0=NORMAL,1=CON9 DIMENT) PLU PPTY # 9999 PRICE (0=PRE9 SET,1=HALO,2=PRICE TBL) PRICE/HALO 999999.99 PRICE TBL # 999 -PLU PRICE Y COST 999999.99 q Following information is Display only Note: Copy everything but descriptor, price, and cost. Create PLU By Range [P5-1-2]: Programming ﬁelds and related ﬂags. Field Descriptor COPY # TO # Default 0 0 Explanation Original PLU From this PLU# to –PLU# will have the same contents as ORIGINAL PLU except PLU DESCRIPTOR. –# CREATE PLUs EVERY ARE YOU SURE TO PROCEED? 0 0 N Original PLU will be copied every xxx starting from COPY TO PLU# DELETE PLU [P5-1-3] P-MODE:DELETE PLU PLU # 12345678901234 DESCRIPTOR ABCDEFGHIJKLMNOP PLU PPTY # 9999 Delete PLU [P5-1-3]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR PLU PPTY # Default 0 Explanation PLU # TO BE DELETED 0 [CURSOR UP/DOWN][ENTER] or PLU # and [ENTER] 50 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE Delete PLU [P5-1-3-1] P-MODE:DELETE PLU ARE YOU SURE TO DELETE THIS PLU? Y === INFORMATION TO BE DELETED === PLU # DESCRIPTOR ACTIVE TEXT COLOR (0-15) PLU TYPE (0=NORMAL,1=CONDIMENT) PLU PPTY # PRICE (0=PRESET,1=HALO,2=PRICE TBL) PRICE/HALO PRICE TBL # -PLU PRICE COST q Following information is Display only 99999999999999 XXXXXXXXXXXXXXXX Y 99 9 9999 9 999999.99 999 Y 999999.99 ‘DELETE PLU INFORMATION’ will be displayed after ‘DELETE PLU#’ is entered. Delete PLU [P5-1-3-1]: Programming ﬁelds and related ﬂags. Field Descriptor ARE YOU SURE TO DELETE THIS PLU? === INFORMATION TO BE DELETED === *** Refer to the above list *** Default N Explanation 2350REF01 NEC RSenCounter 4000 Reference Manual x 51 P-MODE P-MODE MENU STRUCTURE DELETE PLU BY RANGE [P5-1-4] P-MODE:DELETE PLU BY RANGE FROM # TO # ARE YOU SURE TO PROCEED? === INFORMATION TO BE DELETED === PLU # DESCRIPTOR ACTIVE TEXT COLOR (0-15) PLU TYPE (0=NORMAL,1=CONDIMENT) PLU PPTY # PRICE (0=PRESET,1=HALO,2=PRICE TBL) PRICE/HALO PRICE TBL # -PLU PRICE COST 0 0 N 999999 Delete PLU By Range [P5-1-4]: Programming ﬁelds and related ﬂags. Field Descriptor FROM # TO # ARE YOU SURE TO PROCEED Default 0 0 N Explanation PLU ACCESS FROM KEYBOARD [P5-1-5] P-MODE:PLU ACCESS FROM KEYBOARD # DESCRIPTOR 1 KEY LVL1 2 KEY LVL2 3 KEY LVL3 4 KEY LVL4 5 KEY LVL5 q INTERNAL NAME KEY LVL1 KEY LVL2 KEY LVL3 KEY LVL4 KEY LVL5 Corresponding keyboard level’s function key descriptor. Reﬂect this keyboard level on Line 20 Status Line. [1][Enter] P-MODE:PLU ACCESS FROM KEYBOARD KB LEVEL 1 BREAKFAST PRESS THE KEY TO BE PROGRAMMED q q Pertinent PLU record is accessed and shown as below If the key pressed is anything other than the PLU key, then “Not MENU Key [099]” error is displayed. 52 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE PLU Access From Keyboard [P5-1-5]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Default LEVEL 1 Explanation DISPLAY CORRESPONDING KEYBOARD LEVEL FUNCTION KEY DESCRIPTOR Display CREATE OR EDIT PLU [P5-1-1-1] on page 48. [EXIT] will take you back to DELETE PLU BY RANGE [P5-1-4] on page 52. PLU ACCESS FROM PLU LIST [P5-1-6] P-MODE:PLU ACCESS FROM PLU LIST PPTY # DESCRIPTOR 9999 ABCDEFGHIJKL q PLU PPTY # is sorted in ascending order. PLU Access From PLU List [P5-1-6]: Programming ﬁelds and related ﬂags. Field Descriptor PPTY # DESCRIPTOR PLU# Default 0 0=All Explanation Corresponding PPTY’s descriptor First PLU [1][Enter] PLU ACCESS FROM PLU LIST [P5-1-6-1] 1P-MODE:PLU ACCESS FROM PLU LIST 2 PLU # DESCRIPTOR 3 12345678901234 ABCDEFGHIJKLMNOP q q PRICE 999999.99 [EXIT] will bring you back to the previous screen. PLU # is sorted in ascending order. PLU Access From PLU List (P5-1-6-1) Programming ﬁelds and related ﬂags. Field Descriptor PLU # DESCRIPTOR Corresponding PLU’s descriptor Default Explanation 2350REF01 NEC RSenCounter 4000 Reference Manual x 53 P-MODE P-MODE MENU STRUCTURE EDIT OPTIONAL PLU RECEIPT DESCRIPTOR [P5-1-7] P-MODE:EDIT OPTIONAL PLU RECEIPT DESCRIPTOR # DESCRIPTOR 999 ABCDEFGHIJKLMNOPQRSTUVWX Edit Optional PLU Receipt Descriptor [P5-1-7]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Default Explanation EDIT OPTIONAL PLU RECEIPT DESCRIPTOR [P5-1-7-1] P-MODE:EDIT OPTIONAL PLU RECEIPT DESCRIPTOR RECEIPT DESCRIPTOR # 001 DESCRIPTOR XXXXXXXXXXXXXXXXXXXXXXXX Edit Optional PLU Receipt Descriptor [P5-1-7-1]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Default Explanation Optional PLU Receipt descriptor (24 characters) EDIT KP/KVS DESCRIPTOR [P5-1-8] 1P-MODE:EDIT KP/KVS DESCRIPTOR 2 # DESCRIPTOR 3 999 ABCDEFGHIJKL Edit KP/KVS Descriptor [P5-1-8]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Prog. Field or Selection Field by / 1-M.A. Max 999 Field Lnx. 3 12 Data Type Int. Chr. Default Explanation 54 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE EDIT KP/KVS DESCRIPTOR [P5-1-8-1] 1P-MODE:EDIT KP/KVS DESCRIPTOR 2 KP/KVS DESCRIPTOR # 3 DESCRIPTOR 4 5 001 XXXXXXXXXXXX Edit KP/KVS Descriptor [P5-1-8-1]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Prog. Field or Selection Field by / 1-M.A. Max 999 Field Lnx. 3 12 Data Type Int. Chr. Default 0 Explanation KP/KVS descriptor MENU KEY RELOCATION [P5-1-9] 1P-MODE:MENU KEY RELOCATION 2 # DESCRIPTOR 3 9 ABCDEFGHIJKL INTERNAL NAME KEY BRD LVL X Menu Key Relocation [P-5-1-9]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR INTERNAL NAME Explanation Select Keyboard level P-MODE :MENU KEY RELOCATION # DESCRIPTOR 1 BREAKFAST 2 LUNCH 3 DINNER 4 SUN. BRUNCH 5 MANAGER q INTERNAL NAME KEY BRD LVL 1 KEY BRD LVL 2 KEY BRD LVL 3 KEY BRD LVL 4 KEY BRD LVL 5 Corresponding keyboard level’s function key descriptor. Reﬂect this keyboard level on Line 20 Status Line. [1][Enter] 2350REF01 NEC RSenCounter 4000 Reference Manual x 55 P-MODE P-MODE MENU STRUCTURE MENU KEY RELOCATION - Keyboard level 1 [P5-1-9-1] 1P-MODE:MENU KEY RELOCATION 2 KB LEVEL 1 BREAKFAST 3 4 PRESS THE KEY TO BE PROGRAMMED 5 6 7 8 9 0 q Note : Error “Invalid Selection”, if any key other than PLU is pressed. [Loc. 1] Key Location 1 [P5-1-9-1-1] 1P-MODE:MENU KEY RELOCATION–KB LEVEL 1 BREAKFASTABC 2 CURRENT:CHEESE BURGEREXT 12345678901234 3 4 NEW ASSIGNMENT: KEY LOC. 001 5 KEY TYPE (0=EXIT, 1=PLU) 1 6 CODE # xxxxxxxxxxxxxxxx 12345678901234 7 8 CODE # DESCRIPTOR 9 00000000000001 TOMATO 0 00000000000002 LETTUCE 1 00000000000004 PICKLES 2 00000000000005 MAYO 3 12345678901233 HAMBURGER 4 12345678901234 CHEESE BURGER 5 12345678901235 HOT DOG 6 12345678901236 GRILLED CHICKEN 7 12345678901237 ROAST BEEF 8 12345678901238 CHICKEN SANDWICH q Display Level & Descriptor Display current information *1 xxx..DESCRIPTOR Note 1: 1. Default value Field Name Key Type Code # Default Value 1 Key Code of the pressed key 2. 3. The initial cursor location within the screen, EDIT KP/KVS DESCRIPTOR [P5-1-81] on page 55, is in the Key Type field. [PG-UP/PG-DWN] scrolls PLU List 3-1) Enter PLU number in CODE# field. 3-2) [EXIT] will; 3-2-1) Check the validity of Code # (see Note 2), if it is valid, then 3-2-2) Assign the Code# to the key 3-2-3) and bring you back to EDIT KP/KVS DESCRIPTOR [P5-1-8-1] on page 55. 3-3) KEY TYPE; 0=EXIT displays the screen, EDIT KP/KVS DESCRIPTOR [P5-18] on page 54. 3-4) [C-UP/C-DWN] are used to step through KEY TYPE and CODE # fields. 56 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE Key Location 1 [P5-1-9-1-1]: Programming ﬁelds and related ﬂags. Field Descriptor KB LEVEL (DESCRIPTOR) CURRENT: (CODE #) NEW ASSIGNMENT:KEY LOC. KEY TYPE CODE # Explanation Display KB Level Descriptor Current Key Descriptor Current Key Code number Physical Key Location pressed (Vertically counted from upper left. Key Code # [EXIT] [P5-1-8-1-1-EXIT] Menu Key Relocation [P5-1-8-1-1] 1P-MODE:MENU KEY RELOCATION 2 KB LEVEL 1 BREAKFAST 3 4 PRESS THE KEY TO BE PROGRAMMED 5 6 7 PREVIOUS KEY ASSIGNMENT: 8 LOC. 001 9 KEY TYPE PLU 0 CODE # 12345678901234 1 DESCRIPTOR CHEESE BURGEREXT 2 q Note 2: Check with Authority Level prior to the following process If PLU NO. is not found (= not registered), then prompt: PLU # 99999999999999 NOT FOUND SELECT 1 TRY ANOTHER PLU # 2 CREATE NEW PLU BY THIS PLU # The cursor will go to the screen, Menu Key Relocation [P5-1-8-1-1] on page 57, CODE number ﬁeld (blank ﬁeld). LINE 6 CODE # 0 Create a new INACTIVE PLU by this number and go to the screen, Menu Key Relocation [P5-18-1-1] on page 57, CODE number ﬁeld. LINE 6 CODE # NEW PLU 12345678901234 2350REF01 NEC RSenCounter 4000 Reference Manual x 57 P-MODE P-MODE MENU STRUCTURE PLU PROPERTY [P-5-2] P-MODE:PLU PROPERTY # DESCRIPTOR 9999 ABCDEFGHIJKL REP.TYPE XXXXXXXX SORT # 99 PLU Property [P5-2]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR REP. TYPE SORT # 1 PLU PPTY 1 Default Explanation PLU Property number PLU [P5-2-1] P-MODE:PLU PROPERTY PLU PPTY # DESCRIPTOR REPORT TYPE (0=NORMAL,1=NON ADD 2=MEMO, 3=NON PROD) NON PROD SALES # (1-3) TAX 123456 OUTPUT TO R/J/K/D INDENTED SORT KEY # COMPUL. SHIFT TYPE 123 CONDIMENT QTY TO R/J/K/D GROUPS: PROD MIX GRP 1 # 99 PROD MIX GRP 2 # 99 SUB GRP # P-MODE:PLU PROPERTY PLU PPTY # DESCRIPTOR OPTION FLAGS: DISCOUNTABLE DISC CATEGORY # (0-99) KITCHEN: KPG # (0-30) KVG # KV. COLOR # (0-7) 6 AUTO GRILL 7 KGG# (0-30) (1/3) 9999 1-(Memory Allocation) XXXXXXXXXXXX 9 9 Y Y Y Y Y Y Y Y Y Y Y 99 Y Y Y Y PIECE COUNT # 99 PIECE COUNT # 99 999 (2/3) 9999 XXXXXXXXXXXX Y 99 99 99 99 9 Y 99 58 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE P-MODE:PLU PROPERTY PLU PPTY # DESCRIPTOR PRINT: RED REVERSE COND. PRICE ROLLED IN MAIN ITEM INVENTORY: SP. ITEM STOCK -INV. ITEM SCALE SCALE PLU TARE WIEGHT TABLE (3/3) 9999 XXXXXXXXXXXX Y Y Y Y Y N 0 PLU Property [P5-2-1] Programming ﬁelds and related ﬂags. Field Descriptor PLU PPTY # DESCRIPTOR REPORT TYPE NON PROD SALES # TAX 123456 OUTPUT TO R/J/K/D INDENTED SORT KEY # COMPUL. SHIFT TYPE 123 CONDIMENT QTY TO R/J/K/D PLU PPTY 1 0 1 NNNNNN YYYY N 1 NNN Y If N, do not show/print quantity of this condiment This key will be used for sort printing and displaying. Only when REPORT TYPE is NON ADD. Default Explanation Hold number of this PLU Property Default descriptor is only on Rec. 1 GROUPS: PROD MIX GRP 1 # PIECE COUNT # PROD. MIX GRP 2 # PIECE COUNT # SUB GRP # 0 0 0 0 1 OPTION FLAGS: DISCOUNTABLE DISC CATEGORY # # N 0 2350REF01 NEC RSenCounter 4000 Reference Manual x 59 P-MODE P-MODE MENU STRUCTURE PLU Property [P5-2-1] Programming ﬁelds and related ﬂags. Field Descriptor Default Explanation KITCHEN: KPG # KVG # KV COLOR REPEATABLE HOLD FIRE AUTO GRILL KGG 0 0 0 N N N 0 PRINT: RED REVERSE COND. PRICE ROLLED IN MAIN ITEM N N N INVENTORY: SP. ITEM STOCK -INV. ITEM N N Special Item stock SCALE SCALE PLU TARE SEIGHT TABLE # N 0 PLU SHIFT [P5-3] Allocatable to max 200 PLU SHIFTS. P-MODE:PLU SHIFT # DESCRIPTOR 999 ABCDEFGHIJKL VALUE 123456 SHIFT TYPE 8 9=1-(MEM. ALLOC.=200), 8=1-3 PLU Shift [P5-3]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR VALUE SHIFT TYPE 000000 1 PLU SHIFT DESCRIPTOR SHIFT VALUE Default Explanation 60 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE PLU SHIFT [P5-3-1] P-MODE:PLU SHIFT PLU SHIFT # DESCRIPTOR SHIFT VALUE SHIFT TYPE (1-3) TEXT COLOR (0-15) 999 XXXXXXXXXXXX 999999 9 99 PLU Shift [P5-3-1]: Programming ﬁelds and related ﬂags. Field Descriptor PLU SHIFT # DESCRIPTOR SHIFT VALUE SHIFT TYPE TEXT COLOR MODIFIER 1 000000 1 15 Default is only on Rec. 1 This VALUE will be used to create the target PLU. Default Explanation PLU PRICE EDIT [P5-4] P-MODE:PLU PRICE EDIT/PLU PPTY SELECTION PPTY # DESCRIPTOR 9999 ABCDEFGHIJKL q 1/2 Select PLU PPTY ﬁrst PLU Price Edit [P5-4]: Programming ﬁelds and related ﬂags. Field Descriptor PPTY # DESCRIPTOR Default Explanation [1][Enter] 2350REF01 NEC RSenCounter 4000 Reference Manual x 61 P-MODE P-MODE MENU STRUCTURE PRICE EDIT [P5-4-1] P-MODE:PLU PRICE EDIT PLU # DESCRIPTOR 12345678901234 ABCDEFGHIJKLMNOP q 2/2 PRICE 999999.99 All the PLUs belonging to PLU PPTY 1 will be listed here. PLU Price Edit [P5-4-1]: Programming ﬁelds and related ﬂags. Field Descriptor Default Explanation PLU # DESCRIPTOR PRICE Current price Display only PLU Price Edit [P5-4-1-1] P-MODE:PLU PRICE EDIT PLU # DESCRIPTOR CURRENT PRICE NEW PRICE q q 99999999999999 XXXXXXXXXXXXXXXX 999999.99 999999.99 This will print out changes to the receipt printer or SYSTEM LOG by option. Change information should include before and after change with by whom, date, time, station, transaction number. PLU Price Edit [P5-4-1-1]: Programming ﬁelds and related ﬂags. Field Descriptor Default Explanation PLU # DESCRIPTOR CURRENT PRICE NEW PRICE Current price 0 Display only PLU PRICE TABLE [P5-5] P-MODE:PLU PRICE TABLE # DESCRIPTOR 999 ABCDEFGHIJKL 62 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE PRICE TABLE [P5-5-1] P-MODE:PLU PRICE TABLE TABLE # DESCRIPTOR PRICE PRICE PRICE PRICE PRICE PRICE PRICE PRICE LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL LEVEL 1 2 3 4 5 6 7 8 999 XXXXXXXXXXXX XXX999999.99 XXX999999.99 XXX999999.99 XXX999999.99 XXX999999.99 XXX999999.99 XXX999999.99 XXX999999.99 1-(Memory Allocation) XXX= Currency Mark PLU Price Table [P5-5]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Default Current table number called “PRICE TBL 1” on the 1st. Rec. Explanation Enter descriptor for this table number. PLU Price Table [P5-5-1]: Programming ﬁelds and related ﬂags. Field Descriptor TABLE # DESCRIPTOR PRICE LEVEL 1-8 Default Current table number called “PRICE TBL 1” on the 1st. Rec. 0.0 Explanation If you enter the new table number, then call the new Table by its number. Enter descriptor for this table number. PLU PRICE LEVEL SCHEDULER [P5-6] P-MODE:PLU PRICE LEVEL SCHEDULER CURRENT DEFAULT LEVEL IN X-MODE PRICE EFFECTIVE: LEVEL PERIOD 1 HH:MM-HH:MM 2 HH:MM-HH:MM 3 HH:MM-HH:MM 4 HH:MM-HH:MM 5 HH:MM-HH:MM 6 HH:MM-HH:MM 7 HH:MM-HH:MM 8 HH:MM-HH:MM q 9 SUN Y Y Y Y Y Y Y Y MON Y Y Y Y Y Y Y Y TUE Y Y Y Y Y Y Y Y WED Y Y Y Y Y Y Y Y THU Y Y Y Y Y Y Y Y FRI Y Y Y Y Y Y Y Y SAT Y Y Y Y Y Y Y Y If there are multiple effective periods applicable, then the earliest price level is selected. (If there is an applicable period with the date not allowed, then this will default to the default level set in X Mode. Programming over midnight is allowed. PRICE LEVEL FUNCTION KEY will override above price schedule. q 2350REF01 NEC RSenCounter 4000 Reference Manual x 63 P-MODE P-MODE MENU STRUCTURE q q If none of the above effective period is applicable, then the price will default to the price level set in X-mode. If both FROM and TO time is 99:99, then this period will be ignored. PLU Price Level Scheduler [P5-6]: Programming ﬁelds and related ﬂags. Field Descriptor CURRENT DEFAULT LEVEL IN X-MODE PRICE EFFECTIVE: LEVEL PERIOD 99:99 -99:99 SUN-SAT Default Display only Explanation 24 hour clock 99:99 99:99 N Starting time & inclusive Ending time & inclusive CONDIMENT TABLE [P5-7] Window 1 P-MODE:CONDIMENT TABLE # DESCRIPTOR 999 ABCDEFGHIJKL (1/70) Condiment Table [P5-7]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Default 1 Explanation Enter Cond. Table No. to access a Condiment Table. CONDIMENT TABLE [P5-7-1] Window 2 P-MODE:CONDIMENT TABLE TABLE # 999 DESCRIPTOR XXXXXXXXXXXX TYPE OF SELECTION (0:LINE ITEM,1:QTY) 9 # OF SELECTION 99 ENFORCE # OF SELECTION Y COLOR OF TABLE (0-15) 99 PLU # DESCRIPTOR # 1 99999999999999 XXXXXXXXXXXXXXXX # 2 99999999999999 XXXXXXXXXXXXXXXX # 3 99999999999999 XXXXXXXXXXXXXXXX # 4 99999999999999 XXXXXXXXXXXXXXXX # 5 99999999999999 XXXXXXXXXXXXXXXX # 6 99999999999999 XXXXXXXXXXXXXXXX # 7 99999999999999 XXXXXXXXXXXXXXXX # 8 99999999999999 XXXXXXXXXXXXXXXX # 9 99999999999999 XXXXXXXXXXXXXXXX (1/3) 1-(Memory Allocation) 64 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE P-MODE:CONDIMENT TABLE TABLE # 999 DESCRIPTOR XXXXXXXXXXXX TYPE OF SELECTION (0:LINE ITEM,1:QTY) 9 # OF SELECTION 99 ENFORCE # OF SELECTION Y COLOR OF TABLE (0-15) 99 PLU # DESCRIPTOR # 1 99999999999999 XXXXXXXXXXXXXXXX # 2 99999999999999 XXXXXXXXXXXXXXXX # 3 99999999999999 XXXXXXXXXXXXXXXX # 4 99999999999999 XXXXXXXXXXXXXXXX # 5 99999999999999 XXXXXXXXXXXXXXXX # 6 99999999999999 XXXXXXXXXXXXXXXX # 7 99999999999999 XXXXXXXXXXXXXXXX # 8 99999999999999 XXXXXXXXXXXXXXXX # 9 99999999999999 XXXXXXXXXXXXXXXX q q (2/3),(3/3)) 1-(Memory Allocation) Condiment Table may hold Condiment and Memo Type PLU A maximum of 27 PLUs can be listed in the table. Condiment Table [P5-7-1]: Programming ﬁelds and related ﬂags. Field Descriptor Default Explanation Enter the number to access another condiment table. “COND. TBL 1” on the 1st. Rec. only 0 (line item) 0 N 0 0 defaults to unlimited choice until ‘CLEAR’ key entered. If=Y, then do not accept ‘CLEAR’ key (0=Done = N) Display color pellet to choose from. Enter Condiment PLU number to be at the location speciﬁed by the number. Descriptor of this Table. TABLE # DESCRIPTOR TYPE OF SELECTION # OF SELECTION ENFORCE # OF SELECTION COLOR OF TABLE PLU # Accept not only CONDIMENT but also PLU PREOPERTY REPORT TYPE = MEMO PLU. DESCRIPTOR PLU Descriptor 2350REF01 NEC RSenCounter 4000 Reference Manual x 65 P-MODE P-MODE MENU STRUCTURE CONDIMENT CHAIN [P5-8] P-MODE:CONDIMENT CHAIN # DESCRIPTOR 999 ABCDEFGHIJKL Condiment Chain [P5-8]: Programming ﬁelds and related ﬂags. Field Descriptor CHAIN # DESCRIPTOR Default 1 COND CHAIN 1 Explanation Enter the chain number to access a record Display only [2][ENTER] or [DOWN ARROW][ENTER] CONDIMENT CHAIN [P5-8-2] P-MODE:CONDIMENT CHAIN CHAIN # DESCRIPTOR # # # # # # # # # # # # q 999 XXXXXXXXXXXX TABLE # 999 999 999 999 999 999 999 999 999 999 999 999 DESCRIPTOR XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX XXXXXXXXXXXX 1-(Memory Allocation) 1 2 3 4 5 6 7 8 9 10 11 12 In the chain, a maximum of 12 condiment tables can be registered. Condiment Chain [P5-8-2]: Programming ﬁelds and related ﬂags. Field Descriptor Default Explanation Jump to another chain for programming. “COND. CHAIN 1” on only on 1st. Rec. Enter descriptor for this chain. CHAIN # DESCRIPTOR TABLE # (12 TABLES MAX) 1.5.9. LINKED PLU TABLE. Enter the 3 digit table number to be in this chain 66 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE LINKED PLU TABLE [P5-9] P-MODE:LINKED PLU TABLE # DESCRIPTOR 999 ABCDEFGHIJKL [2][ENTER] or [DOWN ARROW][ENTER] Linked PLU Table [P5-9]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Default 1 LINK PLU TBL 1 Explanation Enter LPT number. Display only LINKED PLU TABLE (LPT) [P5-9-2] P-MODE:LINKED PLU TABLE LINKED PLU TABLE # DESCRIPTOR # # # # # # # # # # # # q q q 999 XXXXXXXXXXXX DESCRIPTOR XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX 1-(Memory Allocation) 1 2 3 4 5 6 7 8 9 10 11 12 PLU # 99999999999999 99999999999999 99999999999999 99999999999999 99999999999999 99999999999999 99999999999999 99999999999999 99999999999999 99999999999999 99999999999999 99999999999999 In the LINKED PLU TABLE, a maximum of 12 PLUs can be registered. The PLU in the LINKED PLU TABLE will not call another LINKED PLU TABLE. Nesting of the LINKED PLU TABLE is not allowed. Linked PLU Table [P5-9-2]: Programming ﬁelds and related ﬂags. Field Descriptor Default Explanation Enter the LPT number to access another LINKED PLU TABLE. “LNK PLU TBL1” on the 1st. Rec. only Enter descriptor. LINKED PLU TABLE # DESCRIPTOR PLU# (12 PLUS MAX) Enter the PLU to be in this LPT. 2350REF01 NEC RSenCounter 4000 Reference Manual x 67 P-MODE P-MODE MENU STRUCTURE DISCOUNT CATEGORY [P5-10] P-MODE:DISCOUNT CATEGORY # DESCRIPTOR 99 ABCDEFGHIJKL q Window 1 Maximum 99 ﬁxed. Discount Category [P5-10]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR Default 1 DISC CAT 1 Explanation DISCOUNT CATEGORY [P5-10-1] P-MODE:DISCOUNT CATEGORY DISCOUNT CATEGORY # DESCRIPTOR 99 XXXXXXXXXXXX Window 2 1-99 Discount Category [P5-10-1]: Programming ﬁelds and related ﬂags. Record DISCOUNT CATEGORY # DESCRIPTOR 00=DIABLED ‘DISC CAT 1” on 1st. Rec. only 68 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE PRINT PLU BY TBL, PRICE LIST, PRICE SCHEDULER [P5-11] P-MODE :PRINT PLU BY TBL, PRICE LIST, PRICE SCHEDULER 1 PLU PRICE LIST 2 PLU BY PLU PROPERTY 3 PLU BY DISCOUNT CATEGORY 4 PLU BY MENU LOOK UP 5 PLUS BY PRICE TABLE 6 PLUS PRICE TABLE 7 PLUS PRICE SCHEDULER PLU PRICE LIST [P5-12-1] shows the printing format as follows; List plus and its Price, Sub Group number, PLU Property number in ascending order. *** PLU PRICE LIST *** TOTAL PLU = 0025/1500 The number of PLU registered/PLU Mem. Alloc. NO. PLU # PRICE SUB GRP# DESCRIPTOR PLU PPTY# ------------------------------------------------0001 12345678901234 999999.99 999 ABCDEFGHIJKLMNOP 9999 | | 0025 12345678901234 999999.99 999 ABCDEFGHIJKLMNOP 9999 ------------------------------------------------9999 STA. 10 BAR COUNTER ANNIE 12/25/1999 PLU BY PLU PROPERTY [P5-12-2] shows the printing format as follows; Group and list all plus together by PLU Property number. *** PLU BY PLU PROPERTY *** TOTAL PLU PPTY = 0055/0100 PPTY# PPTY NAME DESCRIPTOR PLU # ------------------------------------------------0001 APPETIZER 12345678901235 ABCDEFGHIJKLMNOP 12345678901236 ABCDEFGHIJKLMNPO 43211234567890 FEDCBAGHIJKLMNOP 0002 DRINK 09876543214321 POABCDEFGGUHJNAB | | 0055 DESERT 12345678901234 ABCDEFGHIJKLMNOP ------------------------------------------------9999 STA. 10 BAR COUNTER ANNIE 12/25/1999 2350REF01 NEC RSenCounter 4000 Reference Manual x 69 P-MODE P-MODE MENU STRUCTURE PLU BY DISCOUNT CATEGORY [P5-12-3] shows the printing format as follows; Group and list all plus together by Discount Category number. *** PLU BY DISCOUNT CATEGORY*** TOTAL DISCOUNT CATEGORY = 99 DC# DC NAME DESCRIPTOR PLU # ------------------------------------------------01 SANDWICH 12345678901235 ABCDEFGHIJKLMNOP 12345678901236 ABCDEFGHIJKLMNPO 43211234567890 FEDCBAGHIJKLMNOP 02 LARGE DRINK 09876543214321 POABCDEFGGUHJNAB | | 99 DESERT 12345678901234 ABCDEFGHIJKLMNOP ------------------------------------------------9999 STA. 10 BAR COUNTER ANNIE 12/25/1999 PLU BY Menu Look Up [P5-12-4] shows the printing format as follows; Group and list all plus together by MLU number. *** PLU BY MLU*** TOTAL MENU LOOK UP = 999 MLU# MLU NAME DESCRIPTOR PLU # ------------------------------------------------001 SANDWICH 12345678901234 ABCDEFGHIJKLMNOP 12345678901236 ABCDEFGHIJKLMNPO 43211234567890 FEDCBAGHIJKLMNOP 002 LARGE DRINK 09876543214321 POABCDEFGGUHJNAB | | 999 DESERT 12345678901234 ABCDEFGHIJKLMNOP ------------------------------------------------9999 STA. 10 BAR COUNTER ANNIE 12/25/1999 The number of MLU is from S-Mode Mem. Alloc. 70 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE PLU BY PRICE TABLE [P5-12-5] shows the printing format as follows; Group and list all plus together by Price Table number *** PLU BY PRICE TABLE *** TOTAL PRICE TABLE = 999 TBL# TABLE NAME DESCRIPTOR PLU # ------------------------------------------------001 BREAKFAST SP 12345678901234 ABCDEFGHIJKLMNOP 12345678901236 ABCDEFGHIJKLMNPO 43211234567890 FEDCBAGHIJKLMNOP 002 LUNCH SP 09876543214321 POABCDEFGGUHJNAB | | 999 HAPPY HR SP 12345678901234 ABCDEFGHIJKLMNOP ------------------------------------------------9999 STA. 10 BAR COUNTER ANNIE 12/25/1999 PRICE Table [P5-12-6] shows the printing format as follows; List plus and its Price, Sub Group number, PLU Property number in ascending order. *** PLU PRICE TABLE *** TOTAL PRICE TABLE = 999 TBL# TABLE NAME --------------------------------------001 BREAKFAST SP LEVEL 1 $99999.99 LEVEL 5 $99999.99 LEVEL 2 $99999.99 LEVEL 6 $99999.99 LEVEL 3 $99999.99 LEVEL 7 $99999.99 LEVEL 4 $99999.99 LEVEL 8 $99999.99 002 LUNCH SP LEVEL 1 $99999.99 LEVEL 5 $99999.99 LEVEL 2 $99999.99 LEVEL 6 $99999.99 LEVEL 3 $99999.99 LEVEL 7 $99999.99 LEVEL 4 $99999.99 LEVEL 8 $99999.99 | | 999 HAPPY HR SP LEVEL 1 $99999.99 LEVEL 5 $99999.99 LEVEL 2 $99999.99 LEVEL 6 $99999.99 LEVEL 3 $99999.99 LEVEL 7 $99999.99 LEVEL 4 $99999.99 LEVEL 8 $99999.99 --------------------------------------9999 STA. 10 BAR COUNTER ANNIE 12/25/1999 Price Tables Allocated in S-Mode 2350REF01 NEC RSenCounter 4000 Reference Manual x 71 P-MODE P-MODE MENU STRUCTURE PRICE Scheduler [P5-12-7] shows the printing format as follows; *** PLU PRICE SCHEDULER *** DEFAULT LEVEL # : 1 EFFECTIVE # FROM – TO SUN MON TUE WED THU FRI SAT --------------------------------------------------1 08:00-12:00 Y Y Y Y Y Y Y 2 12:01-14:00 Y Y Y Y Y Y Y 3 14:01-20:00 Y Y Y Y Y Y Y 4 00:00-00:00 Y Y Y Y Y Y Y 5 00:00-00:00 Y Y Y Y Y Y Y 6 00:00-00:00 Y Y Y Y Y Y Y 7 00:00-00:00 Y Y Y Y Y Y Y 8 00:00-00:00 Y Y Y Y Y Y Y --------------------------------------------------9999 STA. 10 BAR COUNTER ANNIE12/25/1999 Default level set in X-Mode DOWNLOAD [P5-13] This is the same as Download Application Programs-Inventory [P13-1-6]. 72 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE INVENTORY [P6] P-MODE : 1 SPECIAL ITEM STOCK 2 3 4 5 SPECIAL ITEM STOCK [P6-1-2] P-MODE:SPECIAL ITEM STOCK # DESCRIPTOR 999 ABCDEFGHIJKLMNOP QTY 999999 OUT YES Special Item Stock [P6-1-2]: Programming ﬁelds and related ﬂags. Field Descriptor # DESCRIPTOR QTY OUT Default 1 Explanation Enter the SPECIAL ITEM STOCK number. PLU Descriptor [P6-1-2-1][X/ENTER] P-MODE:SPECIAL ITEM STOCK SPECIAL ITEM # PLU # DESCRIPTOR OUT OF STOCK STOCK QTY RESET AFTER Z1 QTY AFTER RESET 999 99999999999999 XXXXXXXXXXXX Y 999999 Y 999999 0-(Memory Allocation) Check Validity display only Special Item Stock [P6-1-2-1]: Programming ﬁelds and related ﬂags. Field Descriptor SPECIAL ITEM # PLU# DESCRIPTOR OUT OF STOCK N If = Y, then this item will be out of stock regardless of its positive quantity. If = N, then it’s in stock even – stock quantity. Default 1 Explanation STOCK QTY. RESET AFTER Z1 N QTY AFTER RESET 0 If Y, then reset after Z1 Inventory 2350REF01 NEC RSenCounter 4000 Reference Manual x 73 P-MODE P-MODE MENU STRUCTURE MESSAGES [P7] P-MODE :MESSAGES 1 SCREEN MESSAGE 2 RECEIPT/CHECK MESSAGE 3 KITCHEN PRINTER MESSAGE 4 REPORT MESSAGE 5 MONTH AND DAY MESSAGE 7 8 POLE DISPLAY FIXED SCREEN MESSAGE ON ACTION LINE No. 1 2 3 4 5 6 C-↑↓ P-↑↓ ENTER EXIT NEXT PREV P-Mode R-Mode 1 2 3 4 5 C-↑↓ P-↑↓ X/ENTER DONE=EXIT CLEAR The color will follow the TEXT, BACK COLOR of the Action Line. During Recording Macro, the color will be reversed between TEXT and BACK COLOR SCREEN MESSAGE [P7-2] P-MODE :MESSAGES-SCREEN MESSAGE 1 SCREEN MESSAGE (SHORT) 2 SCREN MESSAGE (LONG) 3 ERROR MESSAGE 4 DEFAULT SYSTEM COLOR SCREEN MESSAGE (SHORT) [P7-2-1] P-MODE:SCREEN MESSAGE (SHORT) # USER DEFINED INTERNAL 999 ABCDEFGH ABCDEFGH q q q q 15 messages per screen. Field length is 8 characters per message. Maximum of 200 messages allocated. Screen messages are left justiﬁed after trimming off trailing spaces. 74 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE Screen Message [P7-2-1]: Programming ﬁelds and related ﬂags. Field Descriptor # USER DEFINED INTERNAL Default to Internal Descriptor Explanation Enter the message number to access. [P7-2-1-1][X/ENTER] P-MODE:SCREEN MESSAGE (SHORT) MESSAGE # (1-200) INTERNAL MSG. USER DEFINED MSG. TEXT COLOR (0-15) 999 XXXXXXXX XXXXXXXX 99 Screen Message [P7-2-1-1]: Programming ﬁelds and related ﬂags. RECORD: MESSAGE # INTERNAL MSG. USER DEFINED MSG. TEXT COLOR Screen Message [P7-2-1-1]: Programming ﬁelds and related ﬂags. # Desc # 1 2 3 4 5 6 7 8 9 10 11 12 13 Field Descriptor TABLE # GUEST # CHECK # NO DEST. EAT IN TAKE-OUT TRACK 1 TRACK 2 DRIVE TH PR LVL 1 PR LVL 2 PR LVL 3 PR LVL 4 Text Color 15 15 15 15 15 15 15 15 15 15 15 15 15 Used at Information Line Information Line Information Line Information Line Information Line Information Line Information Line Information Line Information Line Status Line Status Line Status Line Status Line 2350REF01 NEC RSenCounter 4000 Reference Manual x 75 P-MODE P-MODE MENU STRUCTURE Screen Message [P7-2-1-1]: Programming ﬁelds and related ﬂags. # Desc # 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Field Descriptor PR LVL 5 PR LVL 6 PR LVL 7 PR LVL 8 KB LVL 1 KB LVL 2 KB LVL 3 KB LVL 4 KB LVL 5 KP LVL 1 KP LVL 2 KP LVL 3 KP LVL 4 KP LVL 5 STA# STA# Text Color 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Status Line Status Line Status Line Status Line Status Line Status Line Status Line Status Line Status Line Used at X/Enter Status Window X/Enter Status Window X/Enter Status Window X/Enter Status Window X/Enter Status Window X/Enter Status Window Trans. Void Window Information Line Trans. Void Window Information Line Action Line Item Line (Customer) PO/RA Window SEAT # Selection Window Action Line (Customer) Item Line Item Line Action Line Charge Window Item Line (Customer) PO/RA Window Action Line (RA/PO, Adj. Tender) Item Line (Customer) PO/RA Window Action Line (RA/PO, Adj. Tender) Item Line (Customer) PO/RA Window 29 ORDER # ORDER # 30 TRACK # TRACK # 31 TOTAL TOTAL TOTAL 32 33 34 35 CHANGE TAXES PBAL AMT DUE AMT DUE 36 CASH CASH CASH 37 CHECK CHECK CHECK 38 CHARGE CHARGE 76 x NEC RSenCounter 4000 Reference Manual 2350REF01 P-MODE P-MODE MENU STRUCTURE Screen Message [P7-2-1-1]: Programming ﬁelds and related ﬂags. # Desc # Field Descriptor CHARGE 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 PAID TRAINING MGR GRILL WASTE CLOSED PLUSHIFT FREE SERVICED TIPS : ACCT# : AUTH# : TENDER : CHGTIP BALANCE EXPIR. REF STOCK= NON PROD GROUP TYPE SHIFT SHIFT1 SHIFT2 SHIFT3 SHIFT4 SHIFT5 SHIFT6 SHIFT7 SHIFT8 SHIFT9 DATE SEND TO RCEPT Text Color 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Used at Action Line (RA/PO, Adj. Tender) Item Line (Where is "= = = Action Line Action Line Action Line Action Line (To be Deleted ? Use Function Desc.) Close Screen (Customer) PLU Shift Window Title Item Line Item Line? SVC Key window Charge Window Charge Window Charge Window To be Deleted? AMT DUE is used in Charge Window Charge Window = = =" ???) Charge Window X/ENTER Window X/ENTER Window X/ENTER Window-Title X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window X/ENTER Window 2350REF01 NEC RSenCounter 4000 Reference Manual x 77 P-MODE P-MODE MENU STRUCTURE Screen Message [P7-2-1-1]: Programming ﬁelds and related ﬂags. # Desc # 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 KP LEVEL QS TBL# CHK# GST# OPEN ELAPSE SERVER SEAT# SUBTOTAL TAX SEAT RECALL OPEN MORE->

Description

Comments