lighting You Yo u cod. 9900781 MARTINI S.p.A. Industria per l’illuminazione Via Provinciale, 24 41033 - Concordia s/S - Modena (Italy) tel. +39 0535 48111 - fax +39 0535 48220 web: www.martinilight.com e-mail:
[email protected] 1 Product index 2 Alphabetical index 7 The company and LED technology 8 fixtures for interiors 38 fixtures for exteriors 300 Light control systems 496 Symbols used 504 Contents 2 Contents Fixtures for interiors Leader, pg. 40 Virgola, pg. 94 Milo, pg.104 Sax 130 track, pg. 124 Sax 130 recessed, pg. 128 Sax 80 recessed, pg. 134 Bex, pg. 140 Saturno, pg. 150 Wipp, pg. 154 Pico, pg. 192Set, pg. 180 Perla, pg. 170 Bend, pg. 84 Essential, pg. 188 Last minute! Last minute! 3 Contents Fixtures for interiors Gioba, pg. 198 Sistema Decimetro, pg. 210 Ego, pg. 228 Venere, pg. 246 Sheet, pg. 232 Dome, pg. 252 Cut, pg. 260 Stralis recessed, pg. 264 Tube, pg. 272 Roof, pg. 280 503, pg. 286 Eden, pg. 290 Electrifi ed tracks, pg. 294 Last minute! 4 Contents Fixtures for exteriors Stilis, pg.308 Ego, pg.334 Lucylle, pg.340 Selva, pg.344 Selva linear, pg.350 Moove, pg.356 Wipp, pg.358 Lux, pg.364 Stralis, p.384 Perla, p.388 Set, pg.394 Aveline, pg.400 Aton, pg.404 Giulius, pg.410 Nod, pg.330 5 Contents Fixtures for exteriors Drop, pg.416Edo, pg.412 Fix, pg.420 Grisi, pg.424 Roof, pg.430 Osio Pil, pg.436 Piana, pg.442 Walkie Car 230-300, pg.446 Walkie Car 160, pg.450 Walkie Eco, pg.454 Walkie Talkie 50-90-150, p.456 Walkie, pg.466 Walkie Talkie 65, pg.472 Brikko, pg.476 Sasso, pg.480 Porfi do, pg.486 6 In order to constantly improve its products and enhance their performance, Martini reserves the right to modify the products without prior notice. Contents Fixtures for exteriors Poles, pg. 492 7 Alphabetical index Fixtures for interiors 503 Bend Bex Electrifi ed tracks Cut Dome Eden Ego Essential Gioba Leader Milo Perla Pico Roof Led Saturno Sax 80 recessed Sax 130 track Sax 130 recessed Set Sheet Sistema Decimetro Stralis recessed Tube Venere Virgola Wipp and Miniwipp Fixtures for exteriors Aton Aveline Brikko Drop Edo Ego Fix Giulius Grisi wall mounted Lucylle Lux Moove Nod Osio Pil Pali Perla Piana Porfi do Roof LED Sasso Selva Selva Linear Stilis Stralis spotlight Walkie Car 160 Led Walkie Car 230/300 Walkie Eco RGB Walkie Led Walkie Talkie 50/90/150 Walkie Talkie 65 Led Wipp pg. 286 pg. 84 pg. 140 pg. 294 pg. 260 pg. 252 pg. 290 pg. 228 pg. 188 pg. 198 pg. 40 pg. 104 pg. 170 pg. 192 pg. 280 pg. 150 pg. 134 pg. 124 pg. 128 pg. 180 pg. 232 pg. 210 pg. 264 pg. 272 pg. 246 pg. 94 pg. 154 pg. 404 pg. 400 pg. 476 pg. 416 pg. 412 pg. 334 pg. 420 pg. 410 pg. 424 pg. 340 pg. 364 pg. 356 pg. 330 pg. 436 pg. 492 pg. 388 pg. 442 pg. 486 pg. 430 pg. 480 pg. 344 pg. 350 pg. 394 pg. 308 pg. 384 pg. 450 pg. 446 pg. 454 pg. 466 pg. 456 pg. 472 pg. 358 Martini Light 8 MARTINI specialises in providing advanced and customised lighting solutions. Thanks to the expertise and experience accumulated over the years, we are able to offer innovative, cutting-edge products in terms of both performance and design uniformity. MARTINI designs, develops, engineers and manufactures all products in its own offi ces and plants. The company offers a wide range of fi xtures for interiors and exteriors, and places great emphasis on developing highly performing LED-based systems. In addition, we are willing to support customers in searching for innovative and customised solutions. The company is highly attentive towards safeguarding the environment and conforms its behaviour and investments to the most advanced international reference standards. Our desire is to bring the charm of light into every project we undertake, by sharing the passion and the culture of light with those professionals who believe that “illuminating” has more than a merely functional role, but generates emotions as well. www.martinilight.com 9 10 Our warranty is unique because: · It is an extension of the legal warranty. · In extending the warranty we do not add any limits regarding the % of exhausted products. · We never put limits to the warranty for the number of hours of operation of the system. · ...and, above all, our warranty does not compel you to renounce your protection rights acknowledged by the law. MARTINI extends the legal warranty from 2 to 3 years. from 2 to 3 years genuine warranty 11 The law guarantees you under certain conditions of use for two years. We extend this warranty to 3 years. As simple as that. All transparent. All straightforward. We do not need to fill in pages and pages with notes, ifs and buts... Martini is your partner. Read the terms and conditions in our website: www.martinilight.com Law terms because 3 is worth more than 5 genuine qualitygenuine warranty 12 Milan, Torre di Luce (i.e. Tower of Light), sponsored by Audi Martini puts all its know-how at the disposal of customers in helping them to find tailored and innovative lighting solutions. Our ability to master technology and group all production processes within the company enables us to create highly performing and customised solutions, with reliable lead times. Milan, Christmas 2010: in the centre of Milan - Piazza Castello - a 30-metre high tower of light based on the project by architect Luca Trazzi. Approximately 80 luminous panels mounting RGB LEDs, size 120x60 cm, vary their colour according to a sophisticated lighting scheme. The “Sheet” luminous sheets are powered by solar panels mounted on the tower itself. An AUDI-dedicated space lies at the base of the tower to promote the company's leading car models: it is entirely illuminated with MARTINI LED fixtures. Project: Luca Trazzi - Milan tailored light Martini as Partner 13 The new Enzo Ferrari museum in Modena Located on the site of Enzo Ferrari's place of birth and home, a new museum steeped in history yet futuristically designed thanks to its cutting-edge technological solutions. MARTINI is the partner company for all the lighting solutions. Project: FUTURE SYSTEMS Studio in London, by architects Jan Kaplicky and Andrea Morgante. Martini as Partner tailored light 14 Production technologies and the environment MARTINI designs, develops, engineers and manufactures all products in the catalogue in its own offices and plants, while displaying special care and attentiveness towards the environment coupled with sensible, logical behaviour and investments. The products are manufactured in the production plant located in the province of Modena, thereby enabling us to optimise materials procurement and production processes. Raw material purchases are grouped and scheduled so as to optimise and reduce road transport. Our coating plants implement water-based paint that ensures a 90% reduction in the use of solvents, for guaranteeing a healthier environment. The entire production cycle that leads to the finished product takes place in-house, which reduces the need for road transport as opposed to the use of multiple external suppliers. Our awareness has lead us to join GBC Italia (Green Building Council Italy), where we share common goals regarding responsible and sustainable architecture and receive important inputs from shared experiences. Because improvement is always attainable. Moreover, we believe that in order to promote a sustainable building culture based on energy- efficient buildings with limited environmental impact, we not only need highly performing fixtures but also low-impact production processes that safeguard the environment. Consequently, this helps to promote awareness to design in a broad sense that invloves the entire production cycle of the lighting fixture - from the initial idea to the fixture's conversion as recycled material, or its decommissioning. Technology for the environment Martini, LED technology and the environment 15 We believe that LED technology represents the future, because: · it is highly efficient (above 100 lm/W). · it respects the environment: it poses no problems for end-of-life disposal (ROHS) · The light spectrum is devoid of infrared or ultraviolet components. · It has a high colour rendering index (CRI). · It produces a stable light over time. · It has immediate ignition. · It features easy dimming. · It ensures reduced energy consumption and maximum reduction in CO2 emissions. Technology for the environment Martini, LED technology and the environment 16 17 GM LED technology 18 The latest technological frontier for achieving maximum performance coupled with unique quality: a single light source for a uniform and unprecedented light quality, without any multiple- shadow effects. The LED ARRAY is available with the following colour temperatures: 4,000 °K CRI 82 3,000°K CRI 82 2,950°K CRI 97 developed according to our exclusive specifications. The LED Array and the multi-chip GM LED 19 chrome light facetedchrome hard faceted 20 The optics the optics GM LED The computerised design of the optics allows for optimising their shape and finish according to the desired light distribution. The 99,98%- pure aluminium coating ensures a high reflection coefficient. The various optics are designed to satisfy the different requirements of a carefully- studied lighting project. Should these requirements change, the reflector can be replaced with a simple click, thanks to the spring-based locking ring. 21 accessories GM LED The glass screens and click system Extra-clear transparent, satin and blade-of-light filter glass screens. Light concentrates, radiates and stretches to form the desired shape. click system : always simple, always without tools, always with a click. Satin glass = diffuse light Transparent glass = direct light Transparent / satin glass = asymmetrical light 22 The thermal project GM LED EDA (Enveloping Dynamic Air) Know-how and experience cretae the conditions for reliable innovation. The use of advanced computer-based modelling systems for comparing the range of possible solutions, prototyping for verifying the reliability of solutions and the total belief in the project's value have led us to develop a new LED-based lighting concept. 23 The thermal project GM LED EDA (Enveloping Dynamic Air) The die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system is designed to create a flow of convective air that brushes the heat dissipating surface and ensures optimal LED operation. This innovative system ensures that the flow of air passes through the fins, regardless of whether the heat dissipator is positioned vertically or horizontally. Pendant or oriented fixtures offer clear examples of how a thermal project must adapt to the various installation situations and always guarantee the reliability of the implemented technology. 24 3 mm thickness LEADER Led technology 25 A LEADER in technological innovation for developing new aesthetic concepts and new design opportunities for evolved lighting and architectural projects. Spot-on solutions 26 The latest technological frontier for achieving maximum performance coupled with unique quality: a single light source for a uniform and unprecedented light quality, without any multiple- shadow effects. The LED ARRAY is available with the following colour temperatures: 4,000 °K CRI 82 3,000°K CRI 82 2,950°K CRI 97 developed according to our exclusive specifi cations. the Led Array LEADER LED The LED Array and the multi-chip 27 Various optical systems of different sizes are available, in addition to fi nishes for the most diverse lighting and design needs. Various light distribution options from 110° beam opening angle – for using the maximum available light fl ow and achieving high ambient lighting uniformity – to 15°, thanks to the refl ective 99,98%-pure aluminium optic for accent and high-impact lighting. Optical systems the optics LEADER LED 28 An extremely effective heat dissipation system disperses the heat of the LEDs over a straight, broad surface that extends width-wise over a thickness of barely 3 mm. The thermal project The thermal project LEADER LED 29 high illuminance values, low power LEADER LED SUPERFLOOD 22 W 30 The latest technological frontier for achieving maximum performance coupled with unique quality: a single light source for a unique and uniform light quality without any multiple-shadow effects; a single "point" generates the light for developing a sophisticated optical project. LED ARRAY available with the following LED colour temperatures: 4,000 °K CRI 82 3,000 °K CRI 82 2,950 °K CRI 97 developed according to our exclusive specifications. The colour temperature colour temperature GM and LEADER LED 31 The Colour Rendering Index (CRI) of a light source indicates its ability to reproduce colours. The average value indicated is unable to specify how the relevant light source reproduces specific colours in a broad colour range. In order to ensure greater clarity and provide attentive designers with a useful tool in selecting the best light source, we supply the colour rendering value of the single sample colours. GM and LEADER LED CRI Colour rendering index 32° 42° 60° 32 cones and polarised 6 W 33 6 W superfl ood cones and polarised 15° 22° 40° 34 cone and polarised 22 W 35 cones and polarised 22 W superfl ood In order to calculate 18 W values depreciate 22 W values by 12% 15° 22° 40° 36 cone and polarised 25 W 18° 35° 45° 37 50 W cone and polarised 38 indoor 39 indoor 40 A range of products highlighting the value of the project in its manifold applications. design: Lapo Grassellini New! Leader LED 41 Leader LED 42 A coordinated fixture available in the spotlight, wall- mounted or pendant version, in two dimensions for two different LED array power outputs based on LEADER technology: the square-shaped aluminium plate with 18 cm sides fits a centrally-mounted square-shaped extruded aluminium optical system with high-performance 99,98%-pure aluminium faceted optic for 15°, 22°, 40°, beam opening angles; equipped with an 22 W LED ARRAY. UGR value below 19. Also available in the SuperFLOOD version with 110° beam opening angle. General features and technical details the pendant fixture Square LED 43 General features and technical details The square-shaped aluminium plate with 12 cm sides fits a centrally-mounted square-shaped extruded aluminium optical system with high- performance 99,98%-pure aluminium faceted optic for 32°, 43°, 60°, beam opening angles; equipped with a 6 W GM LED. The extruded aluminium control gear compartment is secured to the plate by means of a joint that allows for adjusting the optic by 90° with respect to its vertical axis. Coated using water-based paint that ensures a 90% reduction in the use of solvents. the pendant fixtures Square Mini LED 44 the wall-mounted fi xtures Square LED General features and technical details UGR value below 19. The extruded aluminium control gear compartment is secured to the plate by means of a joint that allows for adjusting the optic by 90° with respect to its vertical axis. 45 The square-shaped aluminium plate with 12 cm sides fi ts a centrally-mounted square-shaped extruded aluminium optical system with high- performance 99,98%-pure aluminium faceted optic for 32°, 43°, 60°, beam opening angles; equipped with a 6 W GM LED. The extruded aluminium control gear compartment is secured to the plate by means of a joint that allows for adjusting the optic by 90° with respect to its vertical axis. Coated using water-based paint that ensures a 90% reduction in the use of solvents. General features and technical details the wall-mounted fi xtures Square Mini LED 46 The wall-mounted fixture - in the compact version - mounts the LED chip without the aid of the parabola for light position adjustment, so as to minimise the thickness of the plate + optic system. An excellent compromise, ideal for applications in which the upper section of the lighting body is concealed. General features and technical details compact range wall-mounted fixtures Square superflood LED 47 setting Square LED 48 The luminaire is equipped with a 22 W GM LED. Coated using water-based paint that ensures a 90% reduction in the use of solvents. General features and technical details the pendant track fixture Square LED 49 The lighting body is equipped with a 6 W GM LED. Coated using water-based paint that ensures a 90% reduction in the use of solvents. General features and technical details the pendant track fixture Square Mini LED 50 A family of recessed fixtures available in two dimensions for two different LED array power outputs based on LEADER technology. SQUARE RECESSED: The square-shaped aluminium plate with 18 cm sides fits a centrally-mounted square-shaped extruded aluminium optical system with high- performance 99,98%-pure aluminium faceted optic for 15°, 22°, 40°, beam opening angles; equipped with an 18 W LED array. UGR value below 19. Available in the SuperFLOOD version with 110° beam opening angle. SQUARE MINI-RECESSED: The square-shaped aluminium plate with 12 cm sides fits a centrally-mounted square-shaped extruded aluminium optical system with high- performance 99,98%-pure aluminium faceted optic for 32°, 43°, 60°, beam opening angles; equipped with a 6 W LED array. General features and technical details the recessed fixtures Square LED side 120mm side 180mmside 180mm 51 SQUARE MAXI-RECESSED: The square-shaped aluminium plate with 22 cm sides fits a centrally-mounted square-shaped extruded aluminium optical system with high- performance 99,98%-pure aluminium faceted optic for 32°, 43°, 60°, beam opening angles; equipped with a 6 W LED array. setting Square LED side 220mm side 120mm 52 Details make the difference: the perfect alignment between the metal dissipating surface and the LED protective glass screens ensures a highly effective, clean and sober design. The sheet-glass alignment. the recessed and pendant fi xtures Square LED 53 The products are available in the following colours: _white _bronze _Cor-Ten _black _light grey _dark grey the colours the recessed fi xtures Square LED 54 Square, round or triangular aluminium pendant fixtures, with 3 mm thickness, coated with water- based paint (and powders) that ensures a 90% reduction in the use of solvents. Equipped with 18 W LED ARRAY based on LEADER technology. The screen-printed and transparent protective screen lies flush with the aluminium sheet, while the light distribution is roto-symmetrical with 110° beam opening angle. The electronic ballasts (included) are available in the standard or 0-10 V analogue dimmable version and are mounted on the sheet with protective casing. The plates are equipped with steel cables that include a device for rapid micrometric adjustment without the aid of tools. General features and technical details the pendant fixtures Even LED 55 setting Even LED 56 Rectangular and elliptical aluminium pendant fixtures, with 3 mm thickness, coated with water- based paint (and powders) that ensures a 90% reduction in the use of solvents. Equipped with 18 W LED ARRAY based on LEADER technology. The screen-printed and transparent protective screen lies flush with the aluminium sheet, while the light distribution is roto-symmetrical with 110° beam opening angle. The electronic ballasts (included) are available in the standard or 0-10 V analogue dimmable version and are mounted on the sheet with protective casing. The plates are equipped with steel cables that include a device for rapid micrometric adjustment without the aid of tools. General features and technical details the pendant fixtures Even LED 57 setting Even LED 58 The square LED recessed and pendant fixtures setting 59 The square LED recessed and pendant fixtures setting 60 Aluminium fixture based on LEADER technology, with 3 mm thickness, equipped with 18 W and 6 W LED ARRAY. The screen-printed and transparent protective screen has a diameter of 50 mm and roto-symmetrical light distribution with 110° beam opening angle. The electronic ballast is remote and must be ordered separately. The product can be installed on plasterboard surfaces by completely recessing the heat dissipation system so that only the 50 mm diameter optic part of the LED remains visible. It can also be installed on masonry walls and ceilings by placing the heat dissipation system under the plaster so that only the optic part of the LED remains visible. General features and technical details recessed fixture Button LED 61 setting Button LED IP20 IP20 IP20 IP20 180 180 90 90 18 0 18 0 30 0 30 0 180 180 50 50 18 0 18 0 30 0 30 0 11 822715 62 technical sheets: track Square LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 track 22 W 82 15° 1.50 30964.____ 22 W 82 22° 1.50 30965.____ 22 W 82 40° 1.50 30966.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 track 22 W 82 110° 1.40 38281.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 track 22 W Warm White 97 15° 1.50 30967.__WW 22 W Warm White 97 22° 1.50 30968.__WW 22 W Warm White 97 40° 1.50 30969.__WW Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 track 22 W Warm White 97 110° 1.40 38282.__WW integrated electronic control gear integrated electronic control gear integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30964.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 38281.11NW) IP20 IP20 120 120 55 55 12 0 12 0 23 0 23 0 11 822715 63 technical sheets: track Square LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 track 6 W 82 32° 1.20 38275.____ 6 W 82 43° 1.20 38276.____ 6 W 82 60° 1.20 38277.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 track 6 W Warm White 97 32° 1.20 38278.__WW 6 W Warm White 97 43° 1.20 38279.__WW 6 W Warm White 97 60° 1.20 38280.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 38275.11NW) Electrified tracks and base-mounted see pg. 294 and subsequents IP20 IP20 180 180 180 180 90 90 50 50 18 0 18 0 18 0 18 0 30 0 30 0 30 0 30 0 IP20 IP20 11 822715 64 technical sheets: wall-mounted Square LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 wall-mounted 22 W 82 15° 1.70 20964.____ 22 W 82 22° 1.70 20965.____ 22 W 82 40° 1.70 20966.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 wall-mounted 22 W Warm White 97 15° 1.70 20967.__WW 22 W Warm White 97 22° 1.70 20968.__WW 22 W Warm White 97 40° 1.70 20969.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 20964.11NW) Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 wall-mounted 22 W 82 110° 1.70 28281.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 wall-mounted 22 W Warm White 97 110° 1.70 28282.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 28281.11NW) 120 120 55 55 12 0 12 0 23 0 23 0 IP20 IP20 11 822715 65 technical sheets: wall-mounted Square LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 wall-mounted 6 W 82 32° 1.40 28275.____ 6 W 82 43° 1.40 28276.____ 6 W 82 60° 1.40 28277.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 wall-mounted 6 W Warm White 97 32° 1.40 28278.__WW 6 W Warm White 97 43° 1.40 28279.__WW 6 W Warm White 97 60° 1.40 28280.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 28275.11NW) 11 822715 66 technical sheets: pendant Square LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 pendant 22 W 82 15° 1.50 50964.____ 22 W 82 22° 1.50 50965.____ 22 W 82 40° 1.50 50966.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 pendant 22 W Warm White 97 15° 1.50 50967.__WW 22 W Warm White 97 22° 1.50 50968.__WW 22 W Warm White 97 40° 1.50 50969.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50964.11NW). Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 pendant 22 W 82 110° 1.40 58281.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 pendant 22 W Warm White 97 110° 1.40 58282.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 58281.11NW) IP20 IP20 180x180 180x180 180x180 180x180 27 0 27 0 23 0 23 0 IP20 IP20 11 822715 67 technical sheets: pendant Square LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 pendant 6 W 82 32° 1.20 58275.____ 6 W 82 43° 1.20 58276.____ 6 W 82 60° 1.20 58277.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 pendant 6 W Warm White 97 32° 1.20 58278.__WW 6 W Warm White 97 43° 1.20 58279.__WW 6 W Warm White 97 60° 1.20 58280.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 58275.11NW). 120x120 120x120 23 0 23 0 IP20 IP20 IP20 IP20 IP20 IP20 18 0 18 0 18 0 18 0 180 180 180 180 hole Ø 130 hole Ø 130 hole Ø 130 hole Ø 130 11 82 2715 79 86 68 technical sheets: recessed Square LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 recessed 18\22 W 82 15° 1.30 30180.____ 18\22 W 82 22° 1.30 30181.____ 18\22 W 82 40° 1.30 30182.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 recessed 18\22 W Warm White 97 15° 1.30 30183.__WW 18\22 W Warm White 97 22° 1.30 30184.__WW 18\22 W Warm White 97 40° 1.30 30185.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30180.11NW). electronic control gear available as an accessory electronic control gear available as an accessory Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 recessed 18\22 W 82 110° 1.40 30186.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 180x180 recessed 18\22 W Warm White 97 110° 1.40 30187.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30186.11NW) electronic control gear available as an accessory electronic control gear available as an accessory see page 95 IP20 IP20 IP20 IP20 12 0 12 0 12 0 12 0 120 120 120 120 hole Ø 90 hole Ø 90 hole Ø 90 hole Ø 90 11 82 2715 79 86 69 technical sheets: recessed Square LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 recessed 6 W 82 110° 0.80 30176.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 recessed 6 W Warm White 97 110° 0.80 30177.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30176.11NW) electronic control gear available as an accessory electronic control gear available as an accessory see page 95 Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 recessed 6 W 82 32° 0.90 30170.____ 6 W 82 43° 0.90 30171.____ 6 W 82 60° 0.90 30172.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Square 120x120 recessed 6 W Warm White 97 32° 0.90 30173.__WW 6 W Warm White 97 43° 0.90 30174.__WW 6 W Warm White 97 60° 0.90 30175.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30170.11NW). electronic control gear available as an accessory electronic control gear available as an accessory IP40 IP40 11 82 2715 79 86 220 12 2 22 0 220 12 2 22 0 70 technical sheets: recessed Square LED Description LED power Colour rendering Beam Wv [Kg] Code Technical drawing [mm] Square 220x220 recessed 50W 82 18° / 30380.____ 50W 82 35° / 30381.____ 50W 82 45° / 30382.____ Description LED power Colour temperature Colour rendering Beam Wv [Kg] Code Technical drawing [mm] Square 220x220 recessed 50W Warm white 97 18° / 30383.__WW 50W Warm white 97 35° / 30384.__WW 50W Warm white 97 45° / 30385.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30380.11NW) integrated electronic control gear 71 11 82 2715 79 86 IP20 IP20 600 600 60 0 60 0 m ax . 2 ,5 00 m ax . 2 ,5 00 72 technical sheets: pendant Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even square pendant 600x600 4 x 18 W 82 110° 4.50 50170.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even square pendant 600x600 4 x 18 W Warm White 97 110° 4.50 50171.__WW 4 x 6 W Warm White 97 110° 4.50 50200.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50170.11NW) Electronic ballast available as accessory Electronic ballast available as accessory 11 82 2715 79 86 IP20 IP20 600 600 60 0 60 0 m ax . 2 ,5 00 m ax . 2 ,5 00 73 technical sheets: pendant Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even square pendant 600x600 4 x 18 W 82 110° 7.50 50172.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even square pendant 600x600 4 x 18 W Warm White 97 110° 7.50 50173.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50172.11NW) 11 82 2715 79 86 IP20 IP20 1500 25 0 m ax . 2 ,5 00 1500 25 0 m ax . 2 ,5 00 74 technical sheets Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even rectangular pendant 1500x250 indirect emission 4 x 18 W 82 110° 4.50 50174.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even rectangular pendant 1500x250 indirect emission 4 x 18 W Warm White 97 110° 4.50 50175.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50174.11NW) Electronic ballast available as accessory Electronic ballast available as accessory 11 82 2715 79 86 IP20 IP20 1500 25 0 m ax . 2 ,5 00 1500 25 0 m ax . 2 ,5 00 75 technical sheets Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even rectangular pendant 1500x250 2 x 18 W 82 110° 4.50 50176.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even rectangular pendant 1500x250 2 x 18 W Warm White 97 110° 4.50 50177.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50176.11NW) Electronic ballast available as accessory Electronic ballast available as accessory 11 82 2715 79 86 IP20 IP20 1500 25 0 m ax . 2 ,5 00 1500 25 0 m ax . 2 ,5 00 76 technical sheets Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even rectangular pendant 1500x250 2 x 18 W 82 110° 6.10 50179.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even rectangular pendant 1500x250 2 x 18 W Warm White 97 110° 6.10 50181.__WW integrated electronic control gear Description Code Linear joining element for continuous row installation 91178.__ Description Code Cable for pass-through wiring 91179.00 Optional accessories integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50179.11NW) 11 82 2715 79 86 IP20 IP20 600 60 0 m ax . 2 ,5 00 600 60 0 m ax . 2 ,5 00 77 technical sheets Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even triangular pendant 3 x 18 W 82 110° 4.50 50182.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even triangular pendant 3 x 18 W Warm White 97 110° 4.50 50183.__WW 3 x 6 W Warm White 97 110° 4.50 50201.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50182.11NW) Electronic ballast available as accessory Electronic ballast available as accessory 11 82 2715 79 86 IP20 IP20 1000 1000 25 0 25 0 m ax . 2 ,5 00 m ax . 2 ,5 00 78 technical sheets Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even elliptical pendant 2 x 18 W 82 110° 3.50 50184.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even elliptical pendant 2 x 18 W Warm White 97 110° 3.50 50185.__WW 2 x 6 W Warm White 97 110° 3.50 50202.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50184.11NW) Electronic ballast available as accessory Electronic ballast available as accessory 11 82 2715 79 86 IP20 IP20 Ø 700 m ax . 2 ,5 00 Ø 700 m ax . 2 ,5 00 79 technical sheets Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even round pendant 4 x 18 W 82 110° 4.50 50186.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even round pendant 4 x 18 W Warm White 97 110° 4.50 50187.__WW 4 x 6 W Warm White 97 110° 4.50 50203.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50186.11NW) Electronic ballast available as accessory Electronic ballast available as accessory 11 82 2715 79 86 IP20 IP20 Ø 700 m ax . 2 ,5 00 Ø 700 m ax . 2 ,5 00 80 technical sheets Even LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Even round pendant 4 x 18 W 82 110° 7.50 50188.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Even round pendant 4 x 18 W Warm White 97 110° 7.50 50189.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50188.11NW) IP20 IP20 IP20 IP20 Ø 66 Ø 66 Ø 66 Ø 66 11 81 technical sheets Button LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Button recessed flush- fitted 18\22 W 82 110° 1.20 30162.11__ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Button recessed for under-plaster wall or ceiling installation 18\22 W 82 110° 3.00 30166.11__ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Button recessed flush- fitted 18\22 W Warm White 97 110° 1.20 30163.11WW Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Button recessed for under-plaster wall or ceiling installation 18\22 W Warm White 97 110° 3.00 30167.11WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30162.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30166.11NW) Electronic ballast available as accessory Electronic ballast available as accessory Electronic ballast available as accessory Electronic ballast available as accessory IP20 IP20 IP20 IP20 Ø 66 Ø 66 Ø 66 Ø 66 11 82 technical sheets Button LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Button recessed flush- fitted 6 W 82 110° 1.20 30160.11__ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Button recessed for under-plaster wall or ceiling installation 6 W 82 110° 3.00 30164.11__ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Button recessed flush- fitted 6 W Warm White 97 110° 1.20 30161.11WW Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Button recessed for under-plaster wall or ceiling installation 6 W Warm White 97 110° 3.00 30165.11WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30160.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30164.11NW) Electronic ballast available as accessory Electronic ballast available as accessory Electronic ballast available as accessory Electronic ballast available as accessory 83 technical sheets Square, Even, Button LED Optional accessories for Square, Even, Button 6 -18 - 22 W Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 2 LED warm white (WW) 38937.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 idoneo per pilotare 1 LED warm white (WW) 38956.00 dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38937.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 2 LEDs warm white (WW) 38936.00 dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 2 LEDs neutral white (NW) 38946.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED warm white (WW) 38955.00 electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED neutral white (NW) 38936.00 Optional recessed accessory 6W Optional recessed accessory 18W Optional recessed accessory 22W 84 Form is function. design: Lapo Grassellini Last minute! Bend LED 85 86 wall-mounted fixture Bend The extremely minimalist wall-mounted fixture is formed of a 3 mm thick aluminium sheet folded by 85° degrees with either one or two LED ARRAYS housed in the upper section. Complete with protective screen. The power supply compartment is housed at the rear. The distance between the wall and the aluminium sheet is minimal because the power supply unit fits into a standard plastic junction box set into the wall. General features and technical details IP40 IP40 IP40 IP40 11 2715 250 138 10 8 250 138 10 8 400 138 10 8 400 138 10 8 87 technical sheets Bend Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Bend wall-mounted 250 22 W 82 15° / 20215.____ 22 W 82 22° / 20216.____ 22 W 82 40° / 20217.____ Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Bend wall-mounted 400 2x18 W 82 15° / 20221.____ 2x18 W 82 22° / 20222.____ 2x18 W 82 40° / 20223.____ Description LED power Colour rendering Beam w[Kg] Code Code Technical drawing [mm] Bend wall-mounted 250 22 W Warm white 97 15° / 20218.__WW 22 W Warm white 97 22° / 20219.__WW 22 W Warm white 97 40° / 20220.__WW Description Potenza LED Temperatura colore Resa cromatica Fascio Peso [Kg] Codice Disegno tecnico [mm] Bend applique 400 2x18W Warm white 97 15° / 20224.__WW 2x18W Warm white 97 22° / 20225.__WW 2x18W Warm white 97 40° / 20226.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 20215.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 20221.11NW) 88 LED technology comes to the office with a series of products combining great design with excellent visual comfort and low power consumption. Floor lamp with an 18W 4 LED ARRAY available in two versions: 1) an uplighter controlled by two buttons for two light settings. 2) a dual light source version with 3 LED ARRAYS for the uplighter and one LED for the direct light with a visual comfort optical system suitable for use in areas with video display terminals (UGR lower than 19). Two light settings controlled by 2 buttons for separate control of the indirect and direct light sources. Version with LED dimming also available. General features and technical details Floor lamp Bend 89 Table lamp Bend General features and technical details Table lamp with a 6W LED ARRAY and a touch- sensitive button for switching on-off and dimming the LED. 90 setting Bend 91 IP40 11 514 580 24 0 19 06 92 Technical sheets Bend Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Bend direct/indirect emission floor lamp 4x18W 82 18° / 01231.____ 4x18W 82 35° / 01232.____ 4x18W 82 45° / 01233.____ Bend dimmable direct/indirect emission floor lamp 4x18W 82 18° / 01234.____ 4x18W 82 35° / 01235.____ 4x18W 82 45° / 01236.____ add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 01231.11NW 514 580 24 0 19 06 11 IP40 IP40 11 700120 35 0 93 Technical sheets Bend Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Bend indirect emission floor lamp 4x18W 82 18° / 01340.____ 4x18W 82 35° / 01341.____ 4x18W 82 45° / 01342.____ Bend dimmable indirect emission floor lamp 4x18W 82 18° / 01343.____ 4x18W 82 35° / 01344.____ 4x18W 82 45° / 01345.____ Description LED power Colour rendering Beam Code Code Technical drawing [mm] Bend dimmable table lamp 6W 82 32° / 11231.____ 6W 82 43° / 11232.____ 6W 82 60° / 11233.____ add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 01340.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 11231.11NW) 27 94 design: Lapo Grassellini Functionality, simplicity, performance. New! Virgola GM LED 95 The evolution of the species: a new family of accent lighting fi xtures based on the GM LED project that blends the new highly performing LED ARRAY lamps with the sophisticated performance of dedicated optics. High effi ciency and extraordinary performance stemming from a design that combines functionality and simplicity. Body composed of an external extruded aluminium optical assembly laser-cut at an angle of 30° and internal aluminium ring for gyroscopic adjustment; the latter houses a die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system designed to create a fl ow of convective air that brushes the dissipating surface measuring 77,048 mm2 and ensures optimal LED operation. The product is equipped with a self-restoring thermal protection. General features and technical details the gyroscopic 111 Virgola GM LED 96 the single cardan 111 The CARDAN version ensures dual adjustability of the optic. High-performance faceted aluminium optic for 15°, 22° and 40° beam opening angles. UGR value below 19. The optics can be interchanged without the aid of tools thanks to the CLIK SYSTEM spring-based locking ring. The electronic ballast is housed inside an extruded aluminium compartment. General features and technical details Virgola GM LED 97 the double cardan 111 Virgola GM LED General features and technical details 2-OPTIC CARDAN version: dual adjustability of the optics ensuring perfect balancing, even on pendant tracks. The electronic ballast is housed inside an extruded aluminium compartment. Coated using water-based paint that ensures a 90% reduction in the use of solvents. The spotlight is perfectly balanced and can be suitably installed on pendant tracks. Screens and click-fi t accessories can be mounted without the aid of tools. 98 setting Virgola GM LED 11 8227 IP20 IP20 190 22 0 12 0 190 22 0 12 0 99 technical sheets: 22 W Virgola GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Virgola GM 111 adjustable 22 W 82 15° 2.00 30790.____ 22 W 82 22° 2.00 30791.____ 22 W 82 40° 2.00 30792.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Virgola GM 111 adjustable 22 W Warm White 97 15° 2.00 30793.__WW 22 W Warm White 97 22° 2.00 30794.__WW 22 W Warm White 97 40° 2.00 30795.__WW Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30790.11NW) Electricfied track and base-mounted see page 294 and subsequents 11 8227 IP20 IP20 212 22 0 14 5 212 22 0 14 5 100 technical sheets: 22 W Virgola GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Virgola GM 111 gyroscopic 22 W 82 15° 2.20 30796.____ 22 W 82 22° 2.20 30797.____ 22 W 82 40° 2.20 30798.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Virgola GM 111 gyroscopic 22 W Warm White 97 15° 2.20 30799.__WW 22 W Warm White 97 22° 2.20 30800.__WW 22 W Warm White 97 40° 2.20 30801.__WW Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30796.11NW) Electricfied track and base-mounted see page 294 and subsequents IP20 IP20 469 469 22 0 22 0 14 5 14 5 11 8227 101 technical sheets: 22 W Virgola GM LED Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Virgola GM 111 gyroscopic 2 x 22 W 82 15° 4.40 30802.____ 2 x 22 W 82 22° 4.40 30803.____ 2 x 22 W 82 40° 4.40 30804.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Virgola GM 111 gyroscopic 2 x 22 W Warm White 97 15° 4.40 30805.__WW 2 x 22 W Warm White 97 22° 4.40 30806.__WW 2 x 22 W Warm White 97 40° 4.40 30807.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30790.11NW) Electricfied track and base-mounted see page 294 and subsequents 11 8227 IP20 IP20 190 22 0 12 0 190 22 0 12 0 IP20 469 22 0 14 5 11 8227 102 Technical sheets: 25W Virgola GM led Description LED power Colour rendering Beam W [Kg] Code Disegno tecnico [mm] Virgola adjustable 25W 82 15° 2,00 30330.____ 25W 82 22° 2,00 30331.____ 25W 82 40° 2,00 30332.____ Descrizione LED power Colour tempera- ture Colour rendering Beam Peso [Kg] Code Disegno tecnico [mm] Virgola adjustable 25W Warm white 97 15° 2,00 30333.__WW 25W Warm white 97 22° 2,00 30334.__WW 25W Warm white 97 40° 2,00 30335.__WW Description LED power Colour temperature Beam W [Kg] Code Disegno tecnico [mm] Virgola gyroscopic 2x25W 82 15° 4,40 30342.____ 2x25W 82 22° 4,40 30343.____ 2x25W 82 40° 4,40 30344.____ integrated electronic control gear integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30330.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30342.11NW) Electricfied track and base-mounted see page 294 and subsequents 11 8227 IP20 IP20 212 22 0 14 5 212 22 0 14 5 IP20 469 22 0 14 5 11 8227 103 schede tecniche: 25W Virgola GM led Description LED power Colour rendering Beam W [Kg] Code Disegno tecnico [mm] Virgola gyroscopic 25W 82 15° 2,20 30336.____ 25W 82 22° 2,20 30337.____ 25W 82 40° 2,20 30338.____ Description LED power Colour tempera- ture Colour rendering Beam Peso [Kg] Code Disegno tecnico [mm] Virgola gyroscopic 25W Warm white 97 15° 2,20 30339.__WW 25W Warm white 97 22° 2,20 30340.__WW 25W Warm white 97 40° 2,20 30341.__WW Description LED power Colour tempera- ture Colour rendering Beam W [Kg] Code Disegno tecnico [mm] Virgola gyroscopic 2x25W Warm white 97 15° 4,40 30345.__WW 2x25W Warm white 97 22° 4,40 30346.__WW 2x25W Warm white 97 40° 4,40 30347.__WW integrated electronic control gear integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30336.11NW) Electricfied track and base-mounted see page 294 and subsequents 104 A new way of interpreting accent lighting: all the advantages of the new GM LED project blending the new highly performing LED ARRAY lights and the excellent performance of sophisticated dedicated optics. design: Lapo Grassellini New! Milo GM Led 105 Professional spotlight equipped with the new LED ARRAY technology. Available in two versions with different functions. The version with balanced ballast (on this page) is suitable for installation on tracks – even pendant. Body comprising an extruded aluminium optical assembly that houses the die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system, designed to create a fl ow of convective air that brushes the 77,048 mm2 (15,931 mm2 in the GM 50 version) dissipating surface and ensures optimal LED operation. The product is equipped with a self-restoring thermal protection. High-performance prismatic aluminium optic for 15°, 22° and 40° (32°, 43°, 60° in the GM 50 version) beam opening angles. UGR value below 19. The optics can be interchanged without the aid of tools thanks to the CLIK SYSTEM spring-based locking system. General features and technical details 50 and 111 Milo GM Led 106 The electronic ballast is housed inside an extruded aluminium compartment. Coated using water- based paint that ensures a 90% reduction in the use of solvents. Screens and click-fi t accessories can be mounted without the aid of tools. General features and technical details compact 111 version Milo GM Led 107 setting Milo GM Led 108 The pendant fixtures are available with two different diameters: 90mm for a power output of 6 W and and 140 mm for a power output of 22, 25, 50 W. The extruded element is always 350 mm high; the following colours are available: white, bronze, black and grey. General features and technical details the pendant fixtures Milo GM Led 109 the pendant fixtures Milo GM Led 110 111 11 8227 IP20 IP20 15 33 9 Ø 90 m ax . 1 50 0 33 9 Ø 90 m ax . 1 50 0 112 technical sheets Milo GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Milo GM 50 pendant track 6 W 82 32° 1.30 50712.____ 6 W 82 43° 1.30 50713.____ 6 W 82 60° 1.30 50714.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Milo GM 50 pendant track 6 W Warm White 97 32° 1.30 50715.__WW 6 W Warm White 97 43° 1.30 50716.__WW 6 W Warm White 97 60° 1.30 50717.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50712.11NW) Electricfied track and base-mounted see page 294 and subsequents IP40 IP40 11 822715 Ø 90 33 9 m ax 1 50 0 Ø 90 33 9 m ax 1 50 0 113 technical sheets Milo 50 LED Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo pendant 6 W 82 32° 1,30 50350.____ 6 W 82 43° 1,30 50351.____ 6 W 82 60° 1,30 50352.____ Description LED power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo pendant 6 W Warm white 97 32° 1,30 50353.__WW 6 W Warm white 97 43° 1,30 50354.__WW 6 W Warm white 97 60° 1,30 50355.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50350.11NW) IP40 IP40 11 822715 Ø 90 33 9 Ø 90 33 9 IP20 IP20 33 9 Ø 90 m ax 1 50 0 33 9 Ø 90 m ax 1 50 0 114 Milo 50 LED technical sheets Description LED Power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo ceiling-mounted 6 W 82 32° 1,20 30350.____ 6 W 82 43° 1,20 30351.____ 6 W 82 60° 1,20 30352.____ Description LED Power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo ceiling-mounted 6 W Warm white 97 32° 1,20 30353.__WW 6 W Warm white 97 43° 1,20 30354.__WW 6 W Warm white 97 60° 1,20 30355.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30350.11NW) integrated electronic control gear Description LED Power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo pendant track 6 W 82 32° 1,30 50385.____ 6 W 82 43° 1,30 50386.____ 6 W 82 60° 1,30 50387.____ Description LED Power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo pendant track 6 W Warm white 97 32° 1,30 50388.__WW 6 W Warm white 97 43° 1,30 50389.__WW 6 W Warm white 97 60° 1,30 50390.__WW alimentazione elettronica integrata alimentazione elettronica integrata aggiungere al codice la finitura colore e la desinenza NW (Neutral White) o WW (Warm White) per scegliere la temperatura colore (es.: 50385.11NW) Electricfied track and base-mounted see page 294 and subsequents IP20 IP20 128 215 14 1 128 215 14 1 11 8227 IP20 IP20 136 130 15 0 136 130 15 0 115 technical sheets Milo GM 50 LED Description LED Power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo2 GM 50 spotlight 6 W 82 32° 1,60 30706.____ 6 W 82 43° 1,60 30707.____ 6 W 82 60° 1,60 30708.____ Description LED Power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo2 GM 50 spotlight 6 W Warm white 97 32° 1,60 30709.__WW 6 W Warm white 97 43° 1,60 30710.__WW 6 W Warm white 97 60° 1,60 30711.__WW Description LED Power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo1 GM 50 spotlight 6 W 82 32° 1,40 30700.____ 6 W 82 43° 1,40 30701.____ 6 W 82 60° 1,40 30702.____ Description LED Power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo1 GM 50 spotlight 6 W Warm white 97 32° 1,40 30703.__WW 6 W Warm white 97 43° 1,40 30704.__WW 6 W Warm white 97 60° 1,40 30705.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50712.11NW) integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50712.11NW) integrated electronic control gear Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories fixture suitable for installation on pendant, recessed or ceiling-mounted tracks. fixture suitable for installation on pendant, recessed or pendant tracks. fixture suitable for installation on pendant, recessed or pendant tracks. fixture suitable for installation on pendant, recessed or ceiling-mounted tracks. Electricfied track and base-mounted see page 294 and subsequents 11 8227 IP20 IP20 Ø 139 33 9 m ax 1 50 0 Ø 139 33 9 m ax 1 50 0 116 technical sheets Milo GM 111 LED Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo GM 111 Pendant track 22 W 82 15° 3,00 50730.____ 22 W 82 22° 3,00 50731.____ 22 W 82 40° 3,00 50732.____ Description LED power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo GM 111 Pendant track 22 W Warm white 97 15° 3,00 50733.__WW 22 W Warm white 97 22° 3,00 50734.__WW 22 W Warm white 97 40° 3,00 50735.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50730.11NW) integrated electronic control gear Electricfied track and base-mounted see page 294 and subsequents m ax 1 50 0 m ax 1 50 0 11 822715 IP40 IP40 117 technical sheets Milo 111 LED Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo 111 Pendant 22 W 82 15° 3,00 50360.____ 22 W 82 22° 3,00 50361.____ 22 W 82 40° 3,00 50362.____ Description LED power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo 111 Pendant 22 W Warm white 97 15° 3,00 50363.__WW 22 W Warm white 97 22° 3,00 50364.__WW 22 W Warm white 97 40° 3,00 50365.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50360.11NW) integrated electronic control gear 11 822715 IP40 IP40 118 technical sheets Milo 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Milo ceiling-mounted 22 W 82 15° 2,90 30360.____ 22 W 82 22° 2,90 30361.____ 22 W 82 40° 2,90 30362.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Milo ceiling-mounted 22 W Warm white 97 15° 2,90 30363.__WW 22 W Warm white 97 22° 2,90 30364.__WW 22 W Warm white 97 40° 2,90 30365.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30360.11NW) integrated electronic control gear 11 8227 IP20 IP20 15 Ø 139 33 9 m ax 1 50 0 Ø 139 33 9 m ax 1 50 0 119 technical sheets Milo GM 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Milo Pendant track 22 W 82 15° 3,00 50391.____ 22 W 82 22° 3,00 50392.____ 22 W 82 40° 3,00 50393.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Milo Pendant track 22 W Warm white 97 15° 3,00 50394.__WW 22 W Warm white 97 22° 3,00 50395.__WW 22 W Warm white 97 40° 3,00 50396.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30391.11NW) integrated electronic control gear Electricfied track and base-mounted see page 294 and subsequents IP20 IP20 185 160 18 4 185 160 18 4 11 8227 IP20 IP20 160 315 18 4 160 315 18 4 120 technical sheets Milo 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Milo1 GM 111 spotlight 22 W 82 15° 2.50 30718.____ 22 W 82 22° 2.50 30719.____ 22 W 82 40° 2.50 30720.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Milo1 GM 111 spotlight 22 W Warm White 97 15° 2.50 30721.__WW 22 W Warm White 97 22° 2.50 30722.__WW 22 W Warm White 97 40° 2.50 30723.__WW integrated electronic control gear integrated electronic control gear fixture suitable for installation on recessed or ceiling-mounted tracks. fixture suitable for installation on recessed or ceiling-mounted tracks. add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30718.11NW) Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Milo2 GM 111 spotlight 22 W 82 15° 3.20 30724.____ 22 W 82 22° 3.20 30725.____ 22 W 82 40° 3.20 30726.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Milo2 GM 111 spotlight 22 W Warm White 97 15° 3.20 30727.__WW 22 W Warm White 97 22° 3.20 30728.__WW 22 W Warm White 97 40° 3.20 30729.__WW integrated electronic control gear fixture suitable for installation on pendant, recessed or pendant tracks. fixture suitable for installation on pendant, recessed or pendant tracks. integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30724.11NW) Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories Electricfied track and base-mounted see page 294 and subsequents 11 822715 m ax 1 50 0 m ax 1 50 0 IP40 IP40 121 Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo Pendant 50 W 82 18° 3,20 50370.____ 50 W 82 35° 3,20 50371.____ 50 W 82 45° 3,20 50372.____ Description LED power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo Pendant 50 W Warm white 97 18° 3,20 50373.__WW 50 W Warm white 97 35° 3,20 50374.__WW 50 W Warm white 97 45° 3,20 50375.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50370.11NW) integrated electronic control gear technical sheets Milo 111 LED 11 822715 IP40 IP40 Ø 139 33 9 m ax 1 50 0 Ø 139 33 9 m ax 1 50 0 122 technical sheets Milo 111 LED Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo pendant track 50 W 82 18° 3,20 50376.____ 50 W 82 35° 3,20 50377.____ 50 W 82 45° 3,20 50378.____ Description LED power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo pendant track 50 W Warm white 97 18° 3,20 50379.__WW 50 W Warm white 97 35° 3,20 50380.__WW 50 W Warm white 97 45° 3,20 50381.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50370.11NW) Electricfied track and base-mounted see page 294 and subsequents 11 822715 IP40 IP40 123 technical sheets Milo 111 LED Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo ceiling-mounted 50 W 82 18° 3,10 30370.____ 50 W 82 35° 3,10 30371.____ 50 W 82 45° 3,10 30372.____ Description LED power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Milo ceiling-mounted 50 W Warm white 97 18° 3,10 30373.__WW 50 W Warm white 97 35° 3,10 30374.__WW 50 W Warm white 97 45° 3,10 30375.__WW integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30370.11NW) integrated electronic control gear 124 design: Alessandro Papotti Extensive application options coupled with a single coordinated design, thanks to the recessed extractable spotlight version. New! Sax 130 GM LED track 125 General features and technical details track-mounted spotlight Sax 130 GM LED Professional spotlight equipped with the new LED ARRAY technology. The control gear compartment is made of die-cast aluminium. The die-cast aluminium optical assembly allows for accurate lamp position locking, and houses the die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system designed to create a fl ow of convective air that brushes the dissipating surface measuring 77,048 mm2, while also ensuring optimal LED operation. The product is equipped with a self-restoring thermal protection. 126 High-performance faceted aluminium optic for 15°, 22° and 40° beam opening angles. UGR value below 19. The optics can be interchanged without the aid of tools thanks to the CLIK SYSTEM spring-based locking ring. Coated using water-based paint that ensures a 90% reduction in the use of solvents. The spotlight is perfectly balanced and can be suitably installed on pendant tracks. Screens and click-fit accessories can be mounted without the aid of tools. General features and technical details track-mounted spotlight Sax 130 GM LED 11 8227 IP20 IP20 72 26 0 238 148 145 72 26 0 238 148 145 127 technical sheets Sax 130 GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 130 GM 111 spotlight 22 W 82 15° 3.90 30748.____ 22 W 82 22° 3.90 30749.____ 22 W 82 40° 3.90 30750.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 130 GM 111 spotlight 22 W Warm White 97 15° 3.90 30751.__WW 22 W Warm White 97 22° 3.90 30752.__WW 22 W Warm White 97 40° 3.90 30753.__WW integrated electronic control gear integrated electronic control gear Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30748.11NW) Electricfied track and base-mounted see page 294 and subsequents 128 design: Martini Staff The Sax 130 recessed range completes the track’s field of application: a single design, multiple applications. New! Sax 130 GM LED recessed 129 General features and technical details recessed fixtures Sax 130 GM LED Professional spotlight equipped with the new LED ARRAY technology. The control gear compartment is made of die-cast aluminium. The die-cast aluminium optical assembly allows for accurate lamp position locking, and houses the die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system designed to create a flow of convective air that brushes the dissipating surface measuring 77,048 mm2, while also ensuring optimal LED operation. The product is equipped with a self-restoring thermal protection. High-performance faceted aluminium optic for 15°, 22° and 40° beam opening angles. UGR value below 19. The optics can be interchanged without the aid of tools thanks to the CLIK SYSTEM spring-based locking ring. Coated using water-based paint that ensures a 90% reduction in the use of solvents. The spotlight is perfectly balanced and can be suitably installed on pendant tracks. Screens and click-fit accessories can be mounted without the aid of tools. 11 8227 IP20 IP20 182×182 198 26 5 19 8 13 0 182×182 198 26 5 19 8 13 0 130 technical sheets Sax 130 GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 130 GM 111 recessed 18/22 W 82 15° 3.90 30754.____ 18/22 W 82 22° 3.90 30755.____ 18/22 W 82 40° 3.90 30756.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 130 GM 111 recessed 18/22 W Warm White 97 15° 3.90 30757.__WW 18/22 W Warm White 97 22° 3.90 30758.__WW 18/22 W Warm White 97 40° 3.90 30759.__WW electronic control gear available as an accessory add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30754.11NW) electronic control gear available as an accessory IP20 IP20 182×352 368 26 5 13 0 19 8 182×352 368 26 5 13 0 19 8 11 8227 131 technical sheets Sax 130 GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 130 GM 111 recessed 2 x 18/22 W 82 15° 7.50 30760.____ 2 x 18/22 W 82 22° 7.50 30761.____ 2 x 18/22 W 82 40° 7.50 30762.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 130 GM 111 recessed 2 x 18/22 W Warm White 97 15° 7.50 30763.__WW 2 x 18/22 W Warm White 97 22° 7.50 30764.__WW 2 x 18/22 W Warm White 97 40° 7.50 30765.__WW electronic control gear available as an accessory add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30760.11NW) electronic control gear available as an accessory 11 8227 IP20 IP20 182×518 538 26 5 19 8 13 0 182×518 538 26 5 19 8 13 0 132 technical sheets Sax 130 GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 130 GM 111 recessed 3 x 18/22 W 82 15° 11.0 30766.____ 3 x 18/22 W 82 22° 11.0 30767.____ 3 x 18/22 W 82 40° 11.0 30768.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 130 GM 111 recessed 3 x 18\22 W Warm White 97 15° 11.0 30769.__WW 3 x 18\22 W Warm White 97 22° 11.0 30770.__WW 3 x 18\22 W Warm White 97 40° 11.0 30771.__WW electronic control gear available as an accessory add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30766.11NW) electronic control gear available as an accessory 11 8227 133 technical sheets Sax 130 GM LED Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 2 LED warm white (WW) 38937.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 idoneo per pilotare 1 LED warm white (WW) 38956.00 dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38937.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 2 LEDs warm white (WW) 38936.00 dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 2 LEDs neutral white (NW) 38946.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED warm white (WW) 38955.00 electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED neutral white (NW) 38936.00 Optional recessed accessory 18W Optional recessed accessory 22W 134 Sax 80: compact dimensions, yet highly powerful. design: Alessandro Papotti New! Sax 80 GM LED recessed 135 General features and technical details recessed fi xtures Sax 80 GM LED Professional spotlight equipped with the new LED ARRAY technology. The control gear compartment is made of die-cast aluminium. The die-cast aluminium optical assembly allows for accurate lamp position locking, and houses the die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system designed to create a fl ow of convective air that brushes the dissipating surface measuring 15,931 mm2, while also ensuring optimal LED operation. The product is equipped with a self-restoring thermal protection. 136 High-performance faceted aluminium optic for 32°, 43° and 60° beam opening angles. Coated using water-based paint that ensures a 90% reduction in the use of solvents. The spotlight is perfectly balanced and can be suitably installed on pendant tracks. Screens and click-fi t accessories can be mounted without the aid of tools. General features and technical details recessed fi xtures Sax 80 GM LED 137 technical sheets Sax 80 GM LED 11 8227 IP20 IP20 IP20 IP20 134 17 0 13 4 70 118×118 134 17 0 13 4 70 118×118 240 17 0 13 4 70 118×224 240 17 0 13 4 70 118×224 138 technical sheets Sax 80 GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 80 GM 50 recessed 6 W 82 32° 1.60 30980.____ 6 W 82 43° 1.60 30981.____ 6 W 82 60° 1.60 30982.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 80 GM 50 recessed 2 x 6 W 82 32° 2.80 30986.____ 2 x 6 W 82 43° 2.80 30987.____ 2 x 6 W 82 60° 2.80 30988.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 80 GM 50 recessed 6 W Warm White 97 32° 1.60 30983.__WW 6 W Warm White 97 43° 1.60 30984.__WW 6 W Warm White 97 60° 1.60 30985.__WW Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 80 GM 50 recessed 2 x 6 W Warm White 97 32° 2.80 30989.__WW 2 x 6 W Warm White 97 43° 2.80 30990.__WW 2 x 6 W Warm White 97 60° 2.80 30991.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30980.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30986.11NW) electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory 11 8227 IP20 IP20 346 17 0 13 4 70 118×330 346 17 0 13 4 70 118×330 139 technical sheets Sax 80 GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 80 GM 50 recessed 3 x 6 W 82 32° 4.20 30992.____ 3 x 6 W 82 43° 4.20 30993.____ 3 x 6 W 82 60° 4.20 30994.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Sax 80 GM 50 recessed 3 x 6 W Warm White 97 32° 4.20 30995.__WW 3 x 6 W Warm White 97 43° 4.20 30996.__WW 3 x 6 W Warm White 97 60° 4.20 30997.__WW Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30992.11NW) Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 electronic ballast available as accessory electronic ballast available as accessory Optional recessed accessory 6W 140 Sober forms and extreme functionality make BEX one of the most innovative and versatile products in the advanced lighting project. design: Lapo Grassellini New! Bex GM LED 141 General features and technical details gyroscopic recessed fi xture Bex GM LED Professional adjustable recessed fi xture equipped with the new LED ARRAY technology. Body comprising a hinged die-cast aluminium supporting bezel that can be adjusted from +90° to -30°, which houses a die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system designed to create a fl ow of convective air that brushes the 77,048 mm2 dissipating surface, and ensures optimal LED operation. The product is equipped with a self-restoring thermal protection. Anthracite-coated internal steel cap. Body comprising a high-performance prismatic aluminium optic for 15°, 22°, 40°, beam opening angles. UGR value below 19. The optics can be interchanged without the aid of tools thanks to the CLIK SYSTEM spring-based locking system. 142 setting Bex GM LED 143 setting Bex GM LED 144 General features and technical details Coated using water-based paint that ensures a 90% reduction in the use of solvents. Screens and click-fit accessories can be mounted without the aid of tools. The light projection can be adjusted by either pulling out the fixture by 90° or inserting it into the false ceiling with maximum 30° inclination and 330° rotation. gyroscopic recessed fixture Bex GM LED 145 gyroscopic recessed fi xture Bex GM LED 11 82 IP20 IP20 hole Ø 160 hole Ø 160 Ø 1 70 80 Ø 1 70 80 146 technical sheets Bex GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Bex GM 111 round recessed 18\22 W 82 15° 1.20 30680.____ 18\22 W 82 22° 1.20 30681.____ 18\22 W 82 40° 1.20 30682.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Bex GM 111 round recessed 18\22 W Warm White 97 15° 1.20 30683.__WW 18\22 W Warm White 97 22° 1.20 30684.__WW 18\22 W Warm White 97 40° 1.20 30685.__WW Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30680.11NW) electronic ballast available as accessory electronic ballast available as accessory 11 82 IP20 IP20 hole Ø 160 hole Ø 160 17 0 170 80 17 0 170 80 147 technical sheets Bex GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Bex GM 111 square recessed 18\22 W 82 15° 1.20 30686.____ 18\22 W 82 22° 1.20 30687.____ 18\22 W 82 40° 1.20 30688.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Bex GM 111 square recessed 18\22 W Warm White 97 15° 1.20 30689.__WW 18\22 W Warm White 97 22° 1.20 30690.__WW 18\22 W Warm White 97 40° 1.20 30691.__WW add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30686.11NW) Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 2 LED warm white (WW) 38937.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 idoneo per pilotare 1 LED warm white (WW) 38956.00 dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38937.00 Description Code Picture electronic ballast 110-240V 50-60Hz class 2 suitable for controlling 2 LEDs warm white (WW) 38936.00 dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 2 LEDs neutral white (NW) 38946.00 Description Code Picture electronic ballast 110-240V 50-60Hz class 2 suitable for controlling 1 LED warm white (WW) 38955.00 electronic ballast 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38936.00 electronic ballast available as accessory electronic ballast available as accessory Optional recessed accessory 18W Optional recessed accessory 22W 11 82 IP20 IP20 hole Ø 160 hole Ø 160 Ø 1 70 80 Ø 1 70 80 148 technical sheets Bex GM LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Bex round recessed 25W 82 15° 1,20 30386.____ 25W 82 22° 1,20 30387.____ 25W 82 40° 1,20 30388.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Bex round recessed 25W Warm white 97 15° 1,20 30389.__WW 25W Warm white 97 22° 1,20 30390.__WW 25W Warm white 97 40° 1,20 30391.__WW recessed optional accessories 25W Description Code Picture dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz isuitable for controlling 1 LED neutral white (NW) o 1 LED warm white (WW) 38949.00 add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30386.11NW) electronic ballast available as accessory electronic ballast available as accessory 11 82 IP20 IP20 hole Ø 160 hole Ø 160 17 0 170 80 17 0 170 80 149 Bex GM LED technical sheets Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Bex square recessed 25W 82 15° 1,20 30392.____ 25W 82 22° 1,20 30393.____ 25W 82 40° 1,20 30394.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Bex square recessed 25W Warm white 97 15° 1,20 30395.__WW 25W Warm white 97 22° 1,20 30396.__WW 25W Warm white 97 40° 1,20 30397.__WW recessed optional accessories 25W Description Code Picture dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 1 LED neutral white (NW) o 1 LED warm white (WW) 38949.00 add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30392.11NW) electronic ballast available as accessory electronic ballast available as accessory 150 Simplicity, functionality and power packed into a micro-fi xture. design: Stepan Babian New! Saturno GM 50 LED 151 Professional adjustable and extractable recessed fi xture made of die-cast aluminium. The light projection can be adjusted by either pulling out the fi xture by 90° or inserting it into the false ceiling with maximum 15° inclination. Rotates through 330°. General features and technical details gyroscopic mini recessed Saturno GM 50 LED 152 General features and technical details The die-cast aluminium optical assembly allows for accurate lamp position locking, and houses the die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system designed to create a fl ow of convective air that brushes the dissipating surface measuring 15,931 mm2, while also ensuring optimal LED operation. The product is equipped with a self-restoring thermal protection. High-performance faceted aluminium optic for 32°, 43°, 60° beam opening angles. gyroscopic mini recessed Saturno GM LED 11 82 IP20 IP20 12 5 Ø 118 hole Ø 105 12 5 Ø 118 hole Ø 105 153 technical sheets Saturno GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Saturno GM 50 recessed 6 W 82 32° 0.60 30736.____ 6 W 82 43° 0.60 30737.____ 6 W 82 60° 0.60 30738.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Saturno GM 50 recessed 6 W Warm White 97 32° 0.60 30739.__WW 6 W Warm White 97 43° 0.60 30740.__WW 6 W Warm White 97 60° 0.60 30741.__WW Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30736.11NW) Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 154 design: Martini Staff Tradition, innovation and great versatility. New! Wipp and Miniwipp GM LED See also outdoor section page 358 155 Adjustable recessed fi xture. Internal black-coated steel structure with visible bezel. Optical support consisting of a double aluminium ring for gyroscopic adjustment. General features and technical details the recessed fi xtures Miniwipp 50 and 111 GM LED New! Wipp and Miniwipp GM LED 156 The die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system is designed to create a fl ow of convective air that brushes the 77,048 mm2 (15,931 mm2 in the GM LED 50 version) dissipating surface, and ensures optimal LED operation. The product is equipped with a self-restoring thermal protection. General features and technical details attachments Miniwipp GM 50 LED 157 High-performance prismatic aluminium optic for 15°, 22° and 40° (32°, 43° and 60° in the 50 version) beam opening angles. UGR value below 19. The optics can be interchanged without the aid of tools thanks to the CLIK SYSTEM spring-based locking system. General features and technical details attachments Wipp GM 111 LED 158 Multifunctional fl oor lamp with emergency function and loudspeaker: a comprehensive and extremely versatile product. Special versions produced according to specifi c requests. General features and technical details the fl oor lamp Wipp GM 111 LED 159 General features and technical details Coated using water-based paint that ensures a 90% reduction in the use of solvents. Screens and click-fi t accessories can be mounted without the aid of tools. the pendant fi xtures Wipp GM 111 LED 160 setting Wipp GM 111 LED 11 8215 IP20 IP20 501 18 1 16 5 168×488 Plasterboard drilling 501 18 1 16 5 168×488 Plasterboard drilling 161 technical sheets Wipp GM 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 recessed 3 x 18\22 W 82 15° 8.00 30957.____ 3 x 18\22 W 82 22° 8.00 30958.____ 3 x 18\22 W 82 40° 8.00 30959.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 recessed 3 x 18\22 W Warm White 97 15° 8.00 30960.__WW 3 x 18\22 W Warm White 97 22° 8.00 30961.__WW 3 x 18\22 W Warm White 97 40° 8.00 30962.__WW add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30957.11NW) electronic control gear available as an accessory electronic control gear available as an accessory Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 2 LED warm white (WW) 38937.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 idoneo per pilotare 1 LED warm white (WW) 38956.00 dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38937.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 2 LEDs warm white (WW) 38936.00 dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 2 LEDs neutral white (NW) 38946.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED warm white (WW) 38955.00 electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED neutral white (NW) 38936.00 Optional recessed accessory 18W Optional recessed accessory 22W 11 8215 IP20 IP20 422 35 5 m ax . 1 50 0 422 35 5 m ax . 1 50 0 162 technical sheets Wipp GM 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 pendant 4 x 18 W 82 15° 8.50 30920.____ 4 x 18 W 82 22° 8.50 30921.____ 4 x 18 W 82 40° 8.50 30922.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 pendant 4 x 18 W Warm White 97 15° 8.50 30923.__WW 4 x 18 W Warm White 97 22° 8.50 30924.__WW 4 x 18 W Warm White 97 40° 8.50 30925.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30920.11NW) 11 8215 IP20 IP20 IP20 IP20 53 9 15 0 205 40 53 9 15 0 205 40 69 2 15 0 205 40 69 2 15 0 205 40 163 technical sheets Wipp GM 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 attachment 1 2 x 18 W 82 15° 4.60 30926.____ 2 x 18 W 82 22° 4.60 30927.____ 2 x 18 W 82 40° 4.60 30928.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 attachment 1 3 x 18 W 82 15° 6.00 30932.____ 3 x 18 W 82 22° 6.00 30933.____ 3 x 18 W 82 40° 6.00 30934.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 attachment 1 2 x 18 W Warm White 97 15° 4.60 30929.__WW 2 x 18 W Warm White 97 22° 4.60 30930.__WW 2 x 18 W Warm White 97 40° 4.60 30931.__WW Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 attachment 1 3 x 18 W Warm White 97 15° 6.00 30935.__WW 3 x 18 W Warm White 97 22° 6.00 30936.__WW 3 x 18 W Warm White 97 40° 6.00 30937.__WW integrated electronic control gear integrated electronic control gear integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30926.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30932.11NW) 11 8215 IP20 IP20 500355 27 00 / 32 00 90° 90° 500355 27 00 / 32 00 90° 90° 164 technical sheets Wipp GM 111 LED Description LED power Colour rendering Beam H [mm] W [kg] Code Technical drawing [mm] Wipp GM 111 floor lamp 6 x 18 W 82 15° 2700 56.0 02280.____ 6 x 18 W 82 15° 3200 57.0 02283.____ 6 x 18 W 82 22° 2700 56.0 02281.____ 6 x 18 W 82 22° 3200 57.0 02284.____ 6 x 18 W 82 40° 2700 56.0 02282.____ 6 x 18 W 82 22° 3200 57.0 02285.____ Description LED power Colour temperature Colour rendering Beam H [mm] W [kg] Code Technical drawing [mm] Wipp GM 111 floor lamp 6 x 18 W Warm White 97 15° 2700 56.0 02286.__WW 6 x 18 W Warm White 97 15° 3200 57.0 02289.__WW 6 x 18 W Warm White 97 22° 2700 56.0 02287.__WW 6 x 18 W Warm White 97 22° 3200 57.0 02290.__WW 6 x 18 W Warm White 97 40° 2700 56.0 02288.__WW 6 x 18 W Warm White 97 40° 3200 57.0 02291.__WW integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 02280.11NW) 11 8215 IP20 IP20 IP20 IP20 181 18 1 16 5 168×168 Plasterboard drilling 181 18 1 16 5 168×168 Plasterboard drilling 341 18 1 16 5 168×328 Plasterboard drilling 341 18 1 16 5 168×328 Plasterboard drilling 165 technical sheets Wipp GM 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 recessed 18\22 W 82 15° 2.80 30945.____ 18\22 W 82 22° 2.80 30946.____ 18\22 W 82 40° 2.80 30947.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 recessed 2 x 18\22 W 82 15° 5.40 30951.____ 2 x 18\22 W 82 22° 5.40 30952.____ 2 x 18\22 W 82 40° 5.40 30953.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 recessed 18\22 W Warm White 97 15° 2.80 30948.__WW 18\22 W Warm White 97 22° 2.80 30949.__WW 18\22 W Warm White 97 40° 2.80 30950.__WW Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Wipp GM 111 recessed 2 x 18\22 W Warm White 97 15° 5.40 30954.__WW 2 x 18\22 W Warm White 97 22° 5.40 30955.__WW 2 x 18\22 W Warm White 97 40° 5.40 30956.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30945.11NW) electronic control gear available as an accessory electronic control gear available as an accessory electronic control gear available as an accessory add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30951.11NW) electronic control gear available as an accessory IP20 IP20 IP20 IP20 11 8215 118×118 13 1 131 90 Plasterboard drilling 118×118 13 1 131 90 Plasterboard drilling 13 1 90 241 118×228 Plasterboard drilling 13 1 90 241 118×228 Plasterboard drilling 166 technical sheets Miniwipp GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 recessed 6 W 82 32° 0.80 30900.____ 6 W 82 43° 0.80 30901.____ 6 W 82 60° 0.80 30902.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 recessed 2 x 6 W 82 32° 1.50 30906.____ 2 x 6 W 82 43° 1.50 30907.____ 2 x 6 W 82 60° 1.50 30908.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 recessed 6 W Warm White 97 32° 0.80 30903.__WW 6 W Warm White 97 43° 0.80 30904.__WW 6 W Warm White 97 60° 0.80 30905.__WW Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 recessed 2 x 6 W Warm White 97 32° 1.50 30909.__WW 2 x 6 W Warm White 97 43° 1.50 30910.__WW 2 x 6 W Warm White 97 60° 1.50 30911.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30900.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30906.11NW) electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory IP20 IP20 11 8215 35 1 90 131 118×338 Plasterboard drilling 35 1 90 131 118×338 Plasterboard drilling 167 technical sheets Miniwipp GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 recessed 3 x 6 W 82 32° 2.20 30912.____ 3 x 6 W 82 43° 2.20 30913.____ 3 x 6 W 82 60° 2.20 30914.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 recessed 3 x 6 W Warm White 97 32° 2.20 30915.__WW 3 x 6 W Warm White 97 43° 2.20 30916.__WW 3 x 6 W Warm White 97 60° 2.20 30917.__WW Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30912.11NW) electronic ballast available as accessory electronic ballast available as accessory Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 Optional recessed accessory 6W 11 82 IP20 IP20 IP20 IP20 15 46 2 19 0 153 40 46 2 19 0 153 40 55 6 19 0 153 40 55 6 19 0 153 40 168 technical sheets Miniwipp GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 attachment 1 2 x 6 W 82 32° 2.90 30885.____ 2 x 6 W 82 43° 2.90 30886.____ 2 x 6 W 82 60° 2.90 30887.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 attachment 1 3 x 6 W 82 32° 3.40 30891.____ 3 x 6 W 82 43° 3.40 30892.____ 3 x 6 W 82 60° 3.40 30893.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 attachment 1 3 x 6 W Warm White 97 32° 3.40 30894.__WW 3 x 6 W Warm White 97 43° 3.40 30895.__WW 3 x 6 W Warm White 97 60° 3.40 30896.__WW Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Miniwipp GM 50 attachment 1 2 x 6 W Warm White 97 32° 2.90 30888.__WW 2 x 6 W Warm White 97 43° 2.90 30889.__WW 2 x 6 W Warm White 97 60° 2.90 30890.__WW integrated electronic control gear integrated electronic control gear integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30885.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30891.11NW) 169 Optional accessories Miniwipp GM 50 LED Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories 170 design: Giampiero Peia For discreet illumination where light takes centre stage. New! Perla GM LED See also outdoor section page 388 171 The fixtures are either totally recessed or equipped with a closing bezel. Aluminium body manufactured by means of a spin-forming and laser-cutting process. The optical assembly is secured using a PPS support with bayonet mount and fixed through a stainless steel spring. The die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system is designed to create a flow or convective air that brushes the dissipating surface measuring 77,048 mm2 (15,931 mm2 in the 50 version), and ensures optimal LED operation. The product is equipped with a self-restoring thermal protection. General features and technical details 50 and 111 Perla GM LED 172 setting Perla GM LED 173 General features and technical details High-performance faceted aluminium optic for 15°, 22°, 40° beam opening angles. UGR value below 19. The optics can be interchanged without the aid of tools thanks to the CLIK SYSTEM spring-based locking system. 50 and 111 Perla GM LED 11 IP20 IP20 IP20 IP20 Required accessories 15 Ø 110 15 0 Ø 108 Ø 110 15 0 Ø 108 17 0 17 0 107x107 107x107 115×115 Plasterboard drilling 115×115 Plasterboard drilling 174 technical sheets Perla GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 50 round recessed with bezel 6 W 82 32° 0.80 30860.____ 6 W 82 43° 0.80 30861.____ 6 W 82 60° 0.80 30862.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 50 square recessed with bezel 6 W 82 32° 0.90 30866.____ 6 W 82 43° 0.90 30867.____ 6 W 82 60° 0.90 30868.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 50 square recessed with bezel 6 W Warm White 97 32° 0.90 30869.__WW 6 W Warm White 97 43° 0.90 30870.__WW 6 W Warm White 97 60° 0.90 30871.__WW Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 50 round recessed with bezel 6 W Warm White 97 32° 0.80 30863.__WW 6 W Warm White 97 43° 0.80 30864.__WW 6 W Warm White 97 60° 0.80 30865.__WW Description Code Picture decorative round bezel for Perla GM 50 (Ø 122) 93444.__ Description Code Picture decorative square bezel for Perla GM 50 (122x122 mm) 93445.__ add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30860.11NW) add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30866.11NW) electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory 11 15 IP20 IP20 Ø 115 15 0 Ø 108 Ø 115 15 0 Ø 108 IP20 IP20 115x115 17 0 107×107 115x115 17 0 107×107 175 technical sheets Perla GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 50 round recessed flush- fitted 6 W 82 32° 0.70 30872.____ 6 W 82 43° 0.70 30873.____ 6 W 82 60° 0.70 30874.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 50 round recessed flush- fitted 6 W Warm White 97 32° 0.70 30875.__WW 6 W Warm White 97 43° 0.70 30876.__WW 6 W Warm White 97 60° 0.70 30877.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30872.11NW) Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 50 square recessed flush- fitted 6 W 82 32° 0.70 30878.____ 6 W 82 43° 0.70 30879.____ 6 W 82 60° 0.70 30880.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 50 square recessed flush- fitted 6 W Warm White 97 32° 0.70 30881.__WW 6 W Warm White 97 43° 0.70 30882.__WW 6 W Warm White 97 60° 0.70 30883.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30878.11NW) add after the colour temperature “B” letter to choose the white interior ring (e.g.: 30856.11NWB) electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory 176 Perla GM 50 LED technical sheets Description Code Picture kit containing 3 mm spacers for Perla GM 50 round fl ush-fi tted (for 9 mm thick plasterboard) 92201.00 Description Code Picture kit containing 3 mm spacers for Perla GM 50 square fl ush-fi tted (for 9 mm thick plasterboard) 92202.00 Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 Optional recessed accessory 6W IP20 IP20 IP20 IP20 Required accessories 21 0 Ø 160 21 0 Ø 160 Ø 165 Ø 165 21 0 165x165 175×175 Plasterboard drilling 21 0 165x165 175×175 Plasterboard drilling 11 15 177 Perla GM 111 LED technical sheets Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 111 round recessed with bezel 18\22 W 82 15° 1.50 30835.____ 18\22 W 82 22° 1.50 30836.____ 18\22 W 82 40° 1.50 30837.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 111 square recessed with bezel 18\22 W 82 15° 1.60 30841.____ 18\22 W 82 22° 1.60 30842.____ 18\22 W 82 40° 1.60 30843.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 111 square recessed with bezel 18\22 W Warm White 97 15° 1.60 30844.__WW 18\22 W Warm White 97 22° 1.60 30845.__WW 18\22 W Warm White 97 40° 1.60 30846.__WW Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 111 round recessed with bezel 18\22 W Warm White 97 15° 1.50 30838.__WW 18\22 W Warm White 97 22° 1.50 30839.__WW 18\22 W Warm White 97 40° 1.50 30840.__WW Description Code Picture decorative round bezel for Perla GM 111 (Ø 200) 93440.__ Description Code Picture decorative square bezel for Perla GM 111 (205x205 mm) 93441.__ add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30835.11NW) add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30841.11NW) electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory 21 0 Ø 160 Ø 165 21 0 Ø 160 Ø 165 21 0 165×165 175x175 21 0 165×165 175x175 IP20 IP20 IP20 IP20 11 15 178 technical sheets Perla GM 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 111 round recessed flush- fitted 18\22 W 82 15° 1.40 30847.____ 18\22 W 82 22° 1.40 30848.____ 18\22 W 82 40° 1.40 30849.____ Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 111 square recessed flush- fitted 18\22 W 82 15° 1.50 30853.____ 18\22 W 82 22° 1.50 30854.____ 18\22 W 82 40° 1.50 30855.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 111 round recessed flush- fitted 18\22 W Warm White 97 15° 1.40 30850.__WW 18\22 W Warm White 97 22° 1.40 30851.__WW 18\22 W Warm White 97 40° 1.40 30852.__WW Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Perla GM 111 square recessed flush- fitted 18\22 W Warm White 97 15° 1.50 30856.__WW 18\22 W Warm White 97 22° 1.50 30857.__WW 18\22 W Warm White 97 40° 1.50 30858.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30847.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30853.11NW) add after the colour temperature “B” letter to choose the white interior ring (e.g.: 30847.11NWB) electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory electronic ballast available as accessory 179 technical sheets Perla GM 111 LED Description Code Picture kit containing 3 mm spacers for Perla GM 111 round fl ush-fi tted (for 9 mm thick plasterboard) 92203.00 Description Code Picture kit containing 3 mm spacers for Perla GM 111 square fl ush-fi tted (for 9 mm thick plasterboard) 92204.00 Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 2 LED warm white (WW) 38937.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 idoneo per pilotare 1 LED warm white (WW) 38956.00 dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38937.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 2 LEDs warm white (WW) 38936.00 dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 2 LEDs neutral white (NW) 38946.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED warm white (WW) 38955.00 electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED neutral white (NW) 38936.00 Optional recessed accessory 18W Optional recessed accessory 22W 180 Sober and innovative. Discover the full potential of this 18 W LED- based fixture. design: Martini Staff New! Set GM LED See also outdoor section page 394 181 50 and 111 recessed Fixed recessed fixture comprising a steel ring coated with water-based paint that ensures a 90% reduction in the use of solvents. Optical assembly secured by means of stainless steel springs. The die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system is designed to create a flow or convective air that brushes the dissipating surface measuring 77,048 mm2 (15,931 mm2 in the GM 50 version), and ensures optimal LED operation. The product is equipped with a self-restoring thermal protection. High-performance prismatic aluminium optic for 15°, 22° and 40° (32°, 43°and 62° in the GM 50 version) beam opening angles. UGR value below 19. The optics can be interchanged without the aid of tools thanks to the CLIK SYSTEM spring-based locking system. General features and technical details Set GM LED 182 setting Set GM LED 183 Available in bronze, white, grey and black. the colours the colours Set GM LED 11 822715 IP20 IP20 Ø 80 Ø 80 184 technical sheets Set GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Set GM 50 recessed 6 W 82 32° 0.30 30816.____ 6 W 82 43° 0.30 30817.____ 6 W 82 60° 0.30 30818.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Set GM 50 recessed 6 W Warm White 97 32° 0.30 30819.__WW 6 W Warm White 97 43° 0.30 30820.__WW 6 W Warm White 97 60° 0.30 30821.__WW add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 3081611NW) Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 Optional recessed accessory 6 W IP20 IP20 11 822715 Ø 140 Ø 140 185 technical sheets Set GM 111 LED Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Set recessed 25 W 82 15° 0,90 30220.____ 25 W 82 22° 0,90 30221.____ 25 W 82 40° 0,90 30222.____ Description LED power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Set recessed 25 W Warm white 97 15° 0,90 30223.__WW 25 W Warm white 97 22° 0,90 30224.__WW 25 W Warm white 97 40° 0,90 30225.__WW Description Code Picture dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 1 LED neutral white (NW) o 1 LED warm white (WW) 38949.00 Optional recessed accessory 25W add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30220.11NW) electronic ballast available as an accessory 11 822715 IP20 IP20 Ø 140 Ø 140 186 technical sheets Set GM 111 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Set GM 111 recessed 18/22 W 82 15° 0.90 30810.____ 18/22 W 82 22° 0.90 30811.____ 18/22 W 82 40° 0.90 30812.____ Description LED power Colour temperature Colour rendering Beam W [kg] Code Technical drawing [mm] Set GM 111 recessed 18/22 W Warm White 97 15° 0.90 30813.__WW 18/22 W Warm White 97 22° 0.90 30814.__WW 18/22 W Warm White 97 40° 0.90 30815.__WW add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 3081011NW) Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories 187 Set GM 111 LED technical sheets Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 2 LED warm white (WW) 38937.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 idoneo per pilotare 1 LED warm white (WW) 38956.00 dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38937.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 2 LEDs warm white (WW) 38936.00 dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 2 LEDs neutral white (NW) 38946.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED warm white (WW) 38955.00 electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED neutral white (NW) 38936.00 Optional recessed accessory 18W Optional recessed accessory 22W 188 Light, form, function. design: Lapo Grassellini Last minute! Essential LED 189 Fixed recessed fixtures comprised of a steel ring that houses a high-performance faceted aluminium optic and extruded aluminium LED heat dissipation system. General features and technical details recessed fixture Essential IP40 IP40 IP40 IP40 11 2715 Ø 58 88 Ø 58 88 Ø 92 88 Ø 92 88 190 technical specifications Essential Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Essential recessed 58 6W 82 32° / 30200.____ 6W 82 43° / 30201.____ 6W 82 60° / 30202.____ Description LED power Colour rendering Beam W [Kg] Code Technical drawing [mm] Essential recessed 92 18/22W 82 15° / 30206.____ 18/22W 82 22° / 30207.____ 18/22W 82 40° / 30208.____ Description LED power Colour temperature Colour rendering Beam Peso [Kg] W [Kg] Code Technical drawing [mm] Essential recessed 58 6W Warm white 97 32° / 30203.__WW 6W Warm white 97 43° / 30204.__WW 6W Warm white 97 60° / 30205.__WW Description LED power Colour temperature Colour rendering Beam W [Kg] Code Technical drawing [mm] Essential recessed 92 18/22W Warm white 97 15° / 30209.__WW 18/22W Warm white 97 22° / 30210.__WW 18/22W Warm white 97 40° / 30211.__WW electronic ballast available as an accessory electronic ballast available as an accessory integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30200.11NW) integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30206.11NW) 191 technical specifi cations Essential Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 2 LED warm white (WW) 38937.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 idoneo per pilotare 1 LED warm white (WW) 38956.00 dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38937.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 2 LEDs warm white (WW) 38936.00 dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 2 LEDs neutral white (NW) 38946.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED warm white (WW) 38955.00 electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED neutral white (NW) 38936.00 Optional recessed accessory 6W Optional recessed accessory 18W Optional recessed accessory 22W 192 design: Martini Staff The elegance of glass combined with a high-tech core. New! Pico 80 GM 50 LED 193 General features and technical details round mini recessed Pico 80 GM 50 LED Steel structure coated with white water-based paint that ensures a 90% reduction in the use of solvents. Tempered moulded glass rings secured with a bayonet mount, available in either acid-etched white, matt blue or aquamarine green. The product is equipped with a self-restoring thermal protection. 194 Also available in the square glass version, in either acid-etched white, matt blue or aquamarine green. General features and technical details square mini recessed Pico 80 GM 50 LED 195 Pico 80 GM 50 LED IP20 IP20 33 78 96 Ø 84 11 5 Ø 84 11 5 Ø 73 Plasterboard drilling Ø 73 Plasterboard drilling 196 technical sheets Pico 80 GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Pico 80 GM 50 round recessed 6 W 82 32° 0.30 30822.____ 6 W 82 43° 0.30 30823.____ 6 W 82 60° 0.30 30824.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Pico 80 GM 50 round recessed 6 W Warm White 97 32° 0.30 30825.__WW 6 W Warm White 97 43° 0.30 30826.__WW 6 W Warm White 97 60° 0.30 30827.__WW Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30822.11NW) electronic ballast available as accessory electronic ballast available as accessory Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 IP20 IP20 33 78 96 84.5 x 84.5 11 5 Ø 73 Plasterboard drilling 84.5 x 84.5 11 5 Ø 73 Plasterboard drilling 197 technical sheets Pico 80 GM 50 LED Description LED power Colour rendering Beam W [kg] Code Technical drawing [mm] Pico 80 GM 50 square recessed 6 W 82 32° 0.30 30828.____ 6 W 82 43° 0.30 30829.____ 6 W 82 60° 0.30 30830.____ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Pico 80 GM 50 square recessed 6 W Warm White 97 32° 0.30 30831.__WW 6 W Warm White 97 43° 0.30 30832.__WW 6 W Warm White 97 60° 0.30 30833.__WW Description Code GM 50 transparent screen 93110.00 GM 50 satin screen 93111.00 GM 50 blade of light screen 93112.00 Optional accessories add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30828.11NW) electronic ballast available as accessory electronic ballast available as accessory Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz 700mA class 2 suitable for controlling max 3 lamps 38939.00 Description Code Picture electronic ballast 110-240V 50-60Hz 700mA class 2 suitable for controlling max3 lamps 38938.00 198198 design: Martini Staff New! Gioba multi-LED 199 All th e l igh t y ou re qu ire w ith an un pr ec ed en ted qu ali ty. 200 CRI Multi LED Colour rendering Each of the four optics houses 4 micro-chip LEDs artfully chosen for their different spectrum features: their perfect blending allows for obtaining light with a CRI of 95. 201 Variable photo-spectrum and colour temperature The absolutely innovative aspect of this project is the possibility of choosing the spectrum of the light source. A first step consists in selecting the LEDs to be used, thus various LEDs can be blended to obtain different basic light spectrums, depending on specific requirements. In addition, a switch mounted on the fixture allows for dimming uniform LED groups so as to modify the spectrum and colour temperature. Multi LED the colour temperature 2,600°K 3,600°K The patented optical system comprises 4 different- shaped refl ectors with output fl ow recovery system for achieving a perfectly even and uniform light distribution. 3-D design 3-D design Multi LED 203 the cone and the polarised Multi LED 204 General features and technical details the pendant fi xtures Gioba multi-LED Professional spotlight with dedicated and customisable spectrum. Body consisting of an extruded aluminium optical assembly that houses a fi nned aluminium heat dissipator and a ventilation fan: the combination of these two elements creates an effective heat dispersal system to ensure maximum lighting power from the 16 multi-chip LEDs, coupled with excellent LED blending for a broad and customisable spectrum. The patented optical system is made of plastic with a 99,98% pure aluminium high vacuum plating treatment, and comprises 4 variously-shaped optics with an output fl ow recovery device to guarantee a perfectly uniform and balanced light emission. 205 Each of the four optics houses 4 micro-chip LEDs artfully chosen for their different spectrum features: their perfect blending allows for obtaining light with a CRI of 95, which can however be customised according to specifi c requirements. General features and technical details tthe tracks Gioba multi-LED 206 UGR value always below 19. The electronic ballast is housed inside an extruded aluminium compartment. Coated using water-based paint that ensures a 90% reduction in the use of solvents. The spotlight is perfectly balanced and can be suitably installed on pendant tracks. General features and technical details the recessed fi xtures Gioba multi-LED 207 setting Gioba multi-LED 11 82 IP20 IP20 m ax . 1 50 0 33 9 Ø 139 15 2 19 4 13 9 345 208 technical sheets Gioba multi-LED Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Gioba spotlight 39 W Warm White 95 30° 3.40 30497.__ Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Gioda pendant 39 W Warm White 95 30° 3.20 50497.__ integrated electronic control gear integrated electronic control gear 11 82 IP20 80 Ø 211 248x124 209 technical sheets Gioba multi-LED Description LED power Colour tempera- ture Colour rendering Beam W [kg] Code Technical drawing [mm] Gioba recessed 39 W Warm White 95 30° 2.85 30495.__ integrated electronic control gear 210 Ever changing flowers of light: pure magic emerging from extreme minimalism to blend with the lavishness of an impalpable decoration. design: Lapo Grassellini New! Sistema Decimetro 211 Fixture composed of a steel structure coated by means of a special water-based treatment that ensures a 90% reduction in the use of solvents. In order to ensure maximum efficiency, each single LED is equipped with a pyramid-shaped reflective glossy aluminium reflector. A special prismatic screen is fixed against the multiple reflector: together with the optical project, it allows for achieving a highly original visual effect. The electronic ballasts mounted on the fixture allow for achieving various LED power outputs. Analogue dimming of the LEDs with the 0-10 V system is possible. The floor lamp is 1.8 m high and 30 cm wide; the full-metal base measures 40x40 cm and is 1.5 cm thick. The product makes a stunning impression thanks to its extreme elegance and stately appearance; the fixture's ultra-linear design and "scenic impact" alternate in a constant interplay where light eventually emerges victorious. The ballasts are housed in an inspectable compartment located in the base of the fixture, while dimming of the LEDs can be adjusted through an appropriate button. Also available in the RGB version. General features and technical details the floor lamp Sistema Decimetro 212 General features and technical details the multiple fixtures Sistema Decimetro The name itself, "Sistema Decimetro" (i.e. "Decimetre System"), denotes the idea of a smaller unit that multiplies to generate larger ones, with the following sizes: 30x30, 40x40, 60x60cm; within these proportions, the luminaires find their appropriate application. Alternatively, several lights can be joined together to create entire illuminated walls. Totalling a thickness of 4+1 cm, the single fixtures can be installed recessed, semi-recessed or exposed, on either walls or ceilings. RGB Equipped with electronic ballasts for obtaining any colour by adjusting the single RGB LEDs. The PLUG SYSTEM connectors ensure rapid wiring. 213 the multiple fixtures: setting Sistema Decimetro 214 Even the smallest-sized fixture measuring 10x10 cm with 4+1 cm thickness is able to generate sensational visual effects. For example, when Sistema Decimetro is distributed on a wall, the eye can appreciate the ever changing appearance of the light while it forms circles, ellipses and parabolas. RGB Equipped with electronic ballasts for obtaining any colour by adjusting the single RGB LEDs. The PLUG SYSTEM connectors ensure rapid wiring. General features and technical details the multiple fixtures Sistema Decimetro 215 the multiple fixtures: setting Sistema Decimetro 216 The linear fixtures come in two sizes, namely 60 and 120 cm (10 cm width), and are flush-fitted. Also in this case the directivity of the forms blends with the inherent richness of the flowers of light. The resulting effect, rather than a mere blade of light, is a vivid and mobile surface. An extruded aluminium supporting structure allows for installing the DECIMETRO module recessed into plasterboard false ceilings, flush, or in technical false ceilings. Either single modules or continuous-row systems can be installed. The PLUG SYSTEM connectors ensure rapid wiring. General features and technical details the linear fixtures Sistema Decimetro 217 the linear fixtures: setting Sistema Decimetro 218 Two sizes are available: 120x10 cm and 150x30 cm. The high level of refinement expressed by these fixtures makes them a superb solution for office applications, yet they are similarly adaptable to different environments where refined details and visual effects are nonetheless appreciated. The fixture is equipped with 2 steel suspension cables that offer quick, micrometric adjustment without the aid of tools. The ballast is housed in the ceiling rose. General features and technical details the pendant fixtures Sistema Decimetro 219 the pendant fixtures: setting Sistema Decimetro 220 setting Sistema Decimetro 221 setting Sistema Decimetro IP40 IP40 11 50 1170 m ax . 1 50 0 11 0 50 1460 m ax . 1 50 0 30 4 90W LED (NW) 24W LED (NW) 62W LED (NW) 16W LED (NW) 222 technical sheets Sistema Decimetro Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro pendant 16 W 80 4.50 50128.11__ 24 W 80 4.50 50129.11__ Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro pendant 62 W 80 9.00 50132.11__ 90 W 80 9.00 50133.11__ electronic control gear integrated into the ceiling rose electronic control gear integrated into the ceiling rose add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50128.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 50128.11NW) 11 IP40 IP40 50 50 400 304 40 0 30 4 IP40 IP40 18W LED (NW) 32W LED (NW) 12W LED (NW) 21W LED (NW) 223 technical sheets Sistema Decimetro Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro ceiling-mounted 300x300 12 W 80 2.20 30134.11__ 18 W 80 2.20 30135.11__ Sistema Decimetro ceiling-mounted 300x300 RGB 6 W / 2.20 30134.11RGB Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro ceiling-mounted 400x400 21 W 80 3.70 30136.11__ 32 W 80 3.70 30137.11__ Sistema Decimetro ceiling-mounted 400x400 RGB 10 W / 3.70 30136.11RGB integrated electronic control gear integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30134.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30136.11NW) DMX512 colour controller see page 496 and subsequent DMX512 colour controller see page 496 and subsequent IP40 50 595 59 5 IP40 72W LED (NW) 50W LED (NW) 11 50 400 304 350 18 00 IP40 IP40 90W LED (NW) 62W LED (NW) 224 technical sheets Sistema Decimetro Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro ceiling-mounted 600x600 50 W 80 8.50 30130.11__ 72 W 80 8.50 30131.11__ Sistema Decimetro ceiling-mounted 600x600 RGB 22 W / 8.50 30130.11RGB integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30130.11NW) DMX512 colour controller see page 496 and subsequent Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro floor-standing 62 W 80 18.0 01132.11__ 90 W 80 18.0 01133.11__ Sistema Decimetro RGB floor-standing 28 W / 18.0 01132.11RGB integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 01132.11NW) DMX512 colour controller see page 496 and subsequent 11 IP40 IP40 596 50 11 0 1173 50 11 0 150 80 150 80 225 technical sheets Sistema Decimetro Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro linear recessed 600 8 W 80 2.00 30124.11__ 12 W 80 2.00 30125.11__ Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro linear recessed 1200 16 W 80 3.70 30128.11__ 24 W 80 3.70 30129.11__ integrated electronic control gear integrated electronic control gear Description Code Extruded recess box, L=596 mm 30145.00 Extruded recess box, L=1173 mm 30146.00 End cap (1-piece pack) 30147.00 Joining element 30148.00 Optional accessories add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30124.11NW) add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30128.11NW) 11 50 304 30 4 IP40 IP40 18W LED (NW) 12W LED (NW) 107 10 7 12 0 IP40 226 technical sheets Sistema Decimetro Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro recessed 300x300 12 W 80 1.70 30140.11__ 18 W 80 1.70 30141.11__ Sistema Decimetro recessed 300x300 RGB 6 W / 1.70 30140.11RGB integrated electronic control gear add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30140.11NW) DMX512 colour controller see page 496 and subsequent Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro recessed 100x100 5 W 80 0.80 30118.11__ electronic ballast available as an accessory add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30118.11NW) Description Code 20 W electronic ballast suitable for controlling up to 3 fixtures 35159.00 Optional accessory 11 50 400 40 0 IP40 IP40 32W LED (NW) 21W LED (NW) 50 595 59 5 IP40 IP40 72W LED (NW) 50W LED (NW) 227 technical sheets Sistema Decimetro Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro recessed 400x400 21 W 80 2.80 30142.11__ 32 W 80 2.80 30143.11__ Sistema Decimetro recessed 400x400 RGB 10 W / 2.80 30142.11RGB integrated electronic control gear add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30142.11NW) DMX512 colour controller see page 496 and subsequent Description LED power Colour rendering W [kg] Code Technical drawing [mm] Sistema Decimetro recessed 600x600 50 W 80 6.00 30120.11__ 72 W 80 6.00 30121.11__ Sistema Decimetro recessed 600x600 RGB 22 W / 6.00 30120.11RGB integrated electronic control gear add the fi nish colour to the code and the suffi x NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30120.11NW) DMX512 colour controller see page 496 and subsequent Description Code Picture recess box for fl ush-installation on false ceilings (300X300) 93461.11 recess box for fl ush-installation on false ceilings (400X400) 93462.11 recess box for fl ush-installation on false ceilings (600X600) 93458.11 Optional accessories 228 Light wants to emerge. design: Giampiero Peia New! Ego LED See also outdoor section page 334 229 pendant, bollard, fl oor lamp New products for satisfying a highly desirable design need: that of emotional indoor lighting solutions. A product displaying rigorous design combined with strong personality. Cylinder-shaped aluminium fi xture with 220 mm diameter and 1,800 mm height for the fl oor lamp version, and 600 mm for the bollard version. The laser cutting process effected with a computer-controlled machine allows for obtaining extremely varied geometric fi gures, starting from a simple circle. The lower section comprises an GM LED module with 22 Watt powered, with an 15° light beam. IP65 protection rating, including the electronic ballast housed in a sealed casing. General features and technical details Ego LED 230 setting Ego LED IP40 IP40 IP40 15 Ø 220 Ø 175 Ø 175 18 00 60 0 m ax . 1 50 0 60 0 11 231 technical sheets Ego LED Description LED power Beam W [kg] Code Technical drawing [mm] Ego GM 111 floor-standing 22 W 15° 11.0 01686.____ Description LED power Beam W [kg] Code Technical drawing [mm] Ego GM 111 pendant 22 W 15° 4.50 51687.____ Description LED power Beam W [kg] Code Technical drawing [mm] Ego GM 111 ceiling-mounted 22 W 15° 4.50 31688.____ add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 01686.11NW) add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 51687.11NW) add the finish colour to the code and the suffix NW (4,000K) or WW (3,000K) to select the colour temperature (e.g.: 31688.11NW) 232 16 million dimmable colours! design: Martini Staff New! Sheet LED 233 General features and technical details Panel comprising an anodised aluminium heat dissipating sheet coated with water-based paint that ensures a 90% reduction in the use of solvents. The internal reflector uniformly distributes the light emitted by the flush-fitted LEDs that are concealed from view under the front bezel. Satin-finish and opal polycarbonate closing sheet. A metal frame (to be ordered separately) allows for flush-installation on plasterboard walls, so that only the luminous sheet remains visible. Remote ballast. The sheet's frame has a 35x15 mm cross-sectional size in the RGB version, and 35x10 mm in the white version. wall-mounted/recessed Sheet LED 234 the complete white-light range Sheet LED Luminous area = 220x1220 mm Luminous area = 220x850 mm Luminous area = 220x600 mm Luminous area = 220x220 mm Luminous area = 100x100 mm Luminous area = 100x600 mm Luminous area = 100x850 mm Luminous area = 100x1220 mm Luminous area = 50x850 mm Luminous area = 50x600 mm Luminous area = 50x1220 mm 235 setting Sheet LED 236 the complete RGB range Sheet LED Luminous area = 220x1220 mm Luminous area = 220x850 mm Luminous area = 220x600 mm Luminous area = 220x220 mm Luminous area = 100x100 mm Luminous area = 100x600 mm Luminous area = 100x850 mm Luminous area = 100x1220 mm Luminous area = 50x850 mm Luminous area = 50x600 mm Luminous area = 50x1220 mm 237 setting Sheet LED 238 239 setting Sheet LED 17 0 67 0 15 15 170 170 IP40 IP40 IP40 IP40 240 technical sheets Sheet LED Description Light source Voltage LED power W [kg] Code Technical drawing [mm] Sheet 170x170 White LED 24 VDC 2W 0.70 38470.00__ Sheet 170x170 RGB LED 24 VDC 2 W max. 0.70 38480.00RGB Description Light source Voltage LED power W [kg] Code Technical drawing [mm] Sheet 170x670 White LED 24 VDC 9 W 2.30 38471.00__ Sheet 170x670 RGB LED 24 VDC 9.5 W max. 2.30 38481.00RGB add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38470.00WW) add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38471.00WW) 92 0 12 90 15 15 170 170 IP40 IP40 IP40 IP40 241 technical sheets Sheet LED Description Light source Voltage LED power W [kg] Code Technical drawing [mm] Sheet 170x1290 White LED 24 VDC 18 W 5.00 38473.00__ Sheet 170x1290 RGB LED 24 VDC 18 W max. 5.00 38483.00RGB Description Light source Voltage LED power W [kg] Code Technical drawing [mm] Sheet 170x920 White LED 24 VDC 13 W 4.00 38472.00__ Sheet 170x920 RGB LED 24 VDC 13 W max. 4.00 38482.00RGB add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38473.00WW) add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38472.00WW) IP40 IP40 IP40 IP40 29 0 67 0 15 15 290 290 242 technical sheets Sheet LED Description Light source Voltage LED power W [kg] Code Technical drawing [mm] Sheet 290x290 White LED 24 VDC 4 W 1.80 38474.00__ Sheet 290x290 RGB LED 24 VDC 4 W max. 1.80 38484.00RGB Description Light source Voltage LED power W [kg] Code Technical drawing [mm] Sheet 290x670 White LED 24 VDC 19 W 4.00 38475.00__ Sheet 290x670 RGB LED 24 VDC 19 W max. 4.00 38485.00RGB add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38474.00WW) add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38475.00WW) Description Code ballast + RGB controller 38496.00 Description Code ballast for monochrome white LED sheet 38495.00 IP40 IP40 IP40 IP40 92 0 12 90 15 15 290 290 243 technical sheets Sheet LED Description Light source Voltage LED power W [kg] Code Technical drawing [mm] Sheet 290x920 White LED 24 VDC 26 W 6.50 38476.00__ Sheet 290x920 RGB LED 24 VDC 26 W max. 6.50 38486.00RGB Description Light source Voltage LED power W [kg] Code Technical drawing [mm] Sheet 290x1290 White LED 24 VDC 36 W 9.00 38477.00__ Sheet 290x1290 RGB LED 24 VDC 36 W max. 9.00 38487.00RGB add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38476.00WW) add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38477.00WW) IP40 IP40 IP40 IP40 120 120 244 technical sheets Sheet Led Description Light source Voltage LED power W [Kg] Code Technical drawing [mm] Sheet 120x670 White LED 24 VDC 9,5 W / 38465.00__ Sheet 120x670 RGB LED 24 VDC 9,5W max / 38490.00RGB Description Light source Voltage LED power W [Kg] Code Technical drawing [mm] Sheet 120x920 LED Bianco 24V c.c. 13W / 38466.00__ Sheet 120x920 RGB LED 24 VDC 13W max / 38491.00RGB add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38465.00WW) add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38466.00WW) IP40 IP40 120 245 technical sheets Sheet Led Description Light source Voltage LED power W [Kg] Code Technical drawing [mm] Sheet 120x1290 White LED 24 VDC 18 W / 38467.00__ Sheet 120x1290 RGB LED 24 VDC 18W max / 38492.00RGB add the suffix WW (Warm White) or CW (Cool White) to the code to select the colour temperature (e.g.: 38467.00WW) 246246 Accent light emitted by high-power LEDs, coupled with long-lasting diffuse light background. A new design suitable for a variety of applications. design: Ettore Fantasia New! Venere GM LED 247 Fixture composed of a steel structure with a base measuring 60x60 cm coated with white water- based paint that ensures a 90%reduction in the use of solvents. Attached to it is a truncated-cone shaped front section that descends from the false ceiling and is made of opal polycarbonate, so as to diffuse the light emitted by 4 compact fluorescent lamps. recessed fixtures General features and technical details Venere GM LED 248 Attached to the lower section is an adjustable spotlight with gyroscopic system that houses a GM LED 111 device; the latter comprises the die-cast aluminium EDA (Enveloping Dynamic Air) heat dissipation system designed to create a flow of convective air that brushes the 77,048 mm2 dissipating surface, and ensures optimal LED operation. The product is equipped with a self-restoring thermal protection. High-performance faceted aluminium optic for 15°, 22° and 40° beam opening angles. UGR value below 19. Screens and click-fit accessories can be mounted without the aid of tools. General features and technical details recessed fixtures Venere GM LED 249 setting Venere GM LED 11 596 Ø 250 17 0 59 6 12 4 596 Ø 250 17 0 59 6 12 4 IP20 IP20 LED Warm White (WW) 18W LED Warm White (WW) 18W LED Warm White (WW) 18W 4x22W TC-EL E27 250 technical sheets Venere GM LED Description Light source Wattage Colour rendering Beam Fitting W [kg] Code Technical drawing [mm] Venere GM 111 TC-EL / LED 4× 22 W max. / / E27 4.80 30970.11__ LED* 18/22 W 82 15° / TC-EL / LED 4× 22 W max. / / E27 4.80 30971.11__ LED* 18/22 W 82 22° / TC-EL / LED 4× 22 W max. / / E27 4.80 30972.11__ LED* 18/22 W 82 40° / Description Light source Wattage Colour tem- perature Colour rendering Beam Fitting W [kg] Code Technical drawing [mm] Venere GM 111 TC-EL / LED 4× 22 W max. / / / E27 4.80 30974.__WW LED* 18/22 W Warm White 97 15° / TC-EL / LED 4× 22 W max. / / / E27 4.80 30975.__WW LED* 18/22 W Warm White 97 22° / TC-EL / LED 4× 22 W max. / / / E27 4.80 30976.__WW LED* 18/22 W Warm White 97 40° / electronic control gear available as an accessory add the finish colour to the code and the suffix NW (Neutral White) or WW (Warm White) to select the colour temperature (e.g.: 30970.11NW) surface-mounted installation only *pre-mounted lamp surface-mounted installation only *pre-mounted lamp electronic control gear available as an accessory 251 technical sheets Venere GM LED Description Code Picture varnished steel housing, for fl ush installa- tion on false ceilings. 93459.11 Description Code GM 111 transparent screen 93113.00 GM 111 satin screen 93114.00 GM 111 blade of light screen 93115.00 Optional accessories Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 2 LED warm white (WW) 38937.00 Description Code Picture dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 idoneo per pilotare 1 LED warm white (WW) 38956.00 dimmable electronic ballast 1-10V 110-240V 50-60Hz class 2 suitable for controlling 1 LED neutral white (NW) 38937.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 2 LEDs warm white (WW) 38936.00 dimmable electronic ballast 1-10V/PUSH 220-240V 50-60Hz suitable for controlling 2 LEDs neutral white (NW) 38946.00 Description Code Picture electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED warm white (WW) 38955.00 electronic ballast 110-240V 50-60Hz classe 2 suitable for controlling 1 LED neutral white (NW) 38936.00