International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. CD registered Period from 21 February to 23 March 2004 These documents are currently under consideration in the technical committee. They have been registered at the Central Secretariat. *Available in English only TC 12 ISO/CD 80000-1 ISO/CD 80000-10 ISO/CD 80000-11 ISO/CD 80000-12 ISO/CD 80000-2 Quantities, units, symbols, conversion factors Quantities and units – Part 1: General (Revision of ISO 31-0:1992) Quantities and units – Part 10: Atomic and nuclear physics (Revision of ISO 31-9:1992, ISO 31-10:1992) Quantities and units – Part 11: Characteristic numbers (Revision of ISO 31-12:1992) Quantities and units – Part 12: Solid state physics (Revision of ISO 31-13:1992) Quantities and units – Part 2: Mathematical signes and symbols to be used in the naturalsciences and technology (Revision of ISO 31-11:1992) Quantities and units – Part 5: Thermodynamics (Revision of ISO 31-4:1992) Quantities and units – Part 6: Electromagnetism (Revision of ISO 31-5:1992) Quantities and units – Part 7: Light (Revision of ISO 31-6:1992) Quantities and units – Part 9: Physical chemistry and molecular physics (Revision of ISO 31-8:1992) Quantities and units – Part 13: Informationscience and technology Zinc and zinc alloys Zinc alloy ingots intended for casting (Revision of ISO 301:1981) Aircraft and space vehicles Aerospace – Drives, internal, six lobes – Metric series Sieves, sieving and other sizing methods * Sample preparation – Sampling and sample splitting of particulate materials for the characterization of particulate properties Cast iron and pig iron Compacted (vermicular) graphite cast irons – Classification Paints and varnishes Paints and varnishes – Evaluation of degradation of paint coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance – Part 6: Assessment of degree of chalking by tape method (Revision of ISO 4628-6:1990) ISO/CD 80000-5 ISO/CD 80000-6 ISO/CD 80000-7 ISO/CD 80000-9 IEC/CD 80000-13 TC 18 ISO/CD 301 TC 20 ISO/CD 12257 TC 24 ISO/CD 14488 TC 25 ISO/CD 16112 TC 35 ISO/CD 4628-6 ISO/CD 11507 Paints and varnishes – Exposure of coatings to artificial weathering – Exposure to fluorescent UV and water (Revision of ISO 11507:1997) Paints and varnishes – Determination of wet-scrub resistance and cleanability of coatings (Revision of ISO 11998:1998) Light metals and their alloys Aluminium and aluminium alloys – Alloyed ingots for remelting – Specifications Nuclear energy Guidelines for plutonium dioxide (PuO2) sampling in a nuclear reprocessing plant (Revision of ISO 11482:1993) Simultaneous determination of uranium and plutonium in dissolver solutions from reprocessing plants – Combined method using K-absorption edge and X-ray fluorescence spectrometry (Revision of ISO 13464:1998) Fire safety Reaction to fire tests – Full-scale staircase test Cranes Cranes – Competency of appointed person Cranes – Competency of crane inspectors Iron ore and direct reduced iron Iron ores for blast furnace and direct reduction feedstocks – Determination of the tumble and abrasion indices (Revision of ISO 3271:1995) Iron ores for blast furnace and direct reduction feedstocks – Determination of bulk density – Method 1 in a small container and Method 2 in a large container (Revision of ISO 3852:1988) Iron ores for blast furnace feedstocks – Determination of the reducibility index – Static reduction with CO and N2 (Revision of ISO 4695:1995) Iron ores for blast furnace feedstocks – Detremination of low-temperature reductiondisintegration indices – Part 1: Static reduction with CO, CO2, H2 and N2 (Revision of ISO 4696-1:1996) Iron ores for blast furnace feedstocks – Determination of low-temperature reductiondisintegration indices – Part 2: Static reduction with CO and N2 (Revision of ISO 4696-2:1998) Iron ores for blast furnace feedstocks – Determination of the free-swelling index – Static reduction with CO and N2 (Revision of ISO 4698:1994) Iron ores for blast furnace and direct reduction feedstocks – Determination of the crushing strength index (Revision of ISO 4700:1996) Iron ores for blast furnace feedstocks – Determination of the final degree of reduction – Static reduction with CO and N2 (Revision of ISO 7215:1995) Iron ores for blast furnace feedstocks – Determination of reduction behaviour under load – Static reduction with CO, H2 and N2 (Revision of ISO 7992:1992) ISO/CD 11998 TC 79 ISO/CD 17615 TC 85 ISO/CD 11482 ISO/CD 13464 TC 92 ISO/CD 22269 TC 96 ISO/CD 23813 ISO/CD 23814 TC 102 ISO/CD 3271 ISO/CD 3852 ISO/CD 4695 ISO/CD 4696-1 ISO/CD 4696-2 ISO/CD 4698 ISO/CD 4700 ISO/CD 7215 ISO/CD 7992 ISO/CD 8371 ISO/CD 11256 Iron ores for blast furnace feedstocks – Determination of the decrepitation index (Revision of ISO 8371:1994) Iron ore pellets – Determination of clustering of feedstock for direct reduction by gas reforming processes (Revision of ISO 11256:1998) Iron ores – Determination of disintegration and metallization of feedstock for direct reduction by gas reforming processes (Revision of ISO 11257:1998) Iron ores – Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes (Revision of ISO 11258:1999) Iron ores for blast furnace feedstocks – Determination of low-temperature reductiondisintegration indices – Dynamic test reduction with CO, CO2, H2 and N2 (Revision of ISO 13930:1998) Direct reduced iron – Determination of tumble strength of hot briquetted iron (HBI) (Revision of ISO 15967:2000) Direct reduced iron – Determination of apparent density and water absorption of hot briquetted iron (HBI) (Revision of ISO 15968:2000) Freight containers Series 1 freight containers – Classification, dimensions and ratings – Amendment 2: 45 containers Series 1 freight containers – Specification and testing – Part 1: General cargo containers for general purposes – Amendment 4: 45 Containers Series 1 freight containers – Rationale for structural test criteria (Revision of ISO/TR 15070:1996) Dentistry Dental root-canal instruments – Part 1: Files, reamers, barbed broaches, rasps, paste carriers, explorers and cotton broaches (Revision of ISO 3630-1:1992) Dental rotary instruments – Mandrels (Revision of ISO 13295:1994) Dentistry – Structure and content of codification normative documents Dentistry – Polishers Dentistry – Periodontal probes Tobacco and tobacco products Determination of cut width for the delimitation of fine-cut tobacco and pipe tobacco Water quality Water quality – Interlaboratory comparisons for proficiency testing of laboratories Water quality – Determination of sulfates by flow analysis (CFA and FIA) Ergonomics Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces – Part 1: Hot surfaces Thermal performance and energy use in the built environment Thermal insulation – Ageing of thermal insulation materials – Determination of settling of fibrous loose-fill thermal insulation used in attic applications Timber structures Timber structures – Wood-based panels – Structural properties Quality management and quality assurance ISO/CD 11257 ISO/CD 11258 ISO/CD 13930 ISO/CD 15967 ISO/CD 15968 TC 104 ISO 668:1995/ CD Amd 2 ISO 1496-1: 1990/CD Amd 4 ISO/CD TR 15070 TC 106 ISO/CD 3630-1 ISO/CD 13295 ISO/CD 16059 ISO/CD 21671 ISO/CD 21672 TC 126 ISO/CD 20193 TC 147 ISO/CD 20612 ISO/CD 22743 TC 159 ISO/DIS 13732-1 TC 163 ISO/CD 18393 TC 165 ISO/CD 16572 TC 176 ISO/CD 9000 TC 184 ISO/CD 15531-43 TC 185 ISO/CD 4126-10 TC 190 ISO/CD 17512 ISO/CD 17924 TC 197 ISO/CD 16110 TC 204 ISO/CD TS 18234-5 TC 206 ISO/CD 22214 TC 210 ISO/CD 14971- A Quality management systems – Fundamentals and vocabulary (Revision of ISO 9000:2000; ISO 9000:2000/CD Amd 1) Industrial automation systems and integration Industrial manufacturing management data – Part 43: Manufacturing flow management data – Conceptual model for flow monitoring and manufacturing data exchange Safety devices for protection against excessive pressure Safety devices for protection against excessive pressure – Part 10: Sizing of safety valves and connected inlet and outlet lines for gas/liquid two-phase flow Soil quality Soil quality – Avoidance test for testing the quality of soils and the toxicity of chemicals – Test with earthworms (Eisenia fetida) Soil quality - Bioavailability of metals in contaminated soil – Physiologically based extraction method Hydrogen technologies Hydrogen generators using fuel processing technologies Intelligent transport systems Traffic and Travel Information (TTI) – TTI via Transport Protocol Expert Group (TPEG) datastreams – Part 5: Public Transport Information Application Fine ceramics Fine ceramics (advanced ceramics, advanced technical ceramics) – Test method for cyclic bending fatigue of monolithic ceramics at room temperature Quality management and corresponding general aspects for medical devices Medical devices – Application of risk management to medical devices – Part A: (Intended project will include Annex B in vitro devices, developed by TC 212) (Revision of ISO 14971:2000; ISO 14971:2000/ Amd 1:2003) Clinical laboratory testing and in vitro diagnostic test systems In vitro diagnostic medical devices – Information supplied by the manufacturer Information technology Information technology – Framework for metamodel interoperability – Part 1: Reference model Information technology – Framework for metamodel interoperability – Part 2: Core (MOF/XMI extensions) TC 212 ISO/CD 18112 JTC 1 ISO/IEC CD 19763-1 ISO/IEC CD 19763-2 DIS circulated Period from 21 February to 23 March 2004 These documents have obtained substantial support within the appropriate ISO technical committee They have been submitted to the ISO member bodies for voting by the date shown *Available in English only Vote terminates TC 2 ISO/DIS 8992 TC 6 ISO/DIS 23713 TC 10 Fasteners Fasteners – General requirements for bolts, screws, studs and nuts (Revision of ISO 8992:1986) Paper, board and pulps *Pulps – Determination of fibre coarseness by automated optical analysis – Polarized light method Technical product documentation 2004-08-11 2004-08-12 ISO/DIS 82045-5 TC 12 *Document management – Part 5: Application of metadata for the construction and facility management sector Quantities, units, symbols, conversion factors 2004-08-12 ISO/DIS 80000-3.2 *Quantities and units – Part 3: Space and time (Revision of ISO 31-1:1992, ISO 31-2:1992) ISO/DIS 80000-4 TC 17 ISO/DIS 23717 TC 22 ISO/DIS 11157 *Quantities and units – Part 4: Mechanics (Revision of ISO 31-3:1992) Steel Steel wire and wire products – Hose reinforcement wire Road vehicles Road vehicles – Brake lining assembly performance – Test using inertia dynamometer (Revision of ISO 11157:1999) ISO/DIS 15031-4.3 Road vehicles – Communication between vehicle and external test equipment for emissions-related diagnostics – Part 4: External test equipment TC 23 ISO/DIS 23206 TC 25 ISO/DIS 185 TC 29 ISO/DIS 10071-2 Tractors and machinery for agriculture and forestry *Agricultural wheeled tractors and attachments – Front loaders – Carriages for attachments Cast iron and pig iron Grey (lamellar graphite) cast irons – Classification (Revision of ISO 185:1988) Small tools Tools for pressing – Ball-lock punches – Part 2: Ball-lock punches for heavy duty (Revision of ISO 10071:1991) TC 34 ISO/DIS 3976 ISO/DIS 8870 ISO/DIS 21871 Food products *Milk fat – Determination of peroxide value (Revision of ISO 3976:1977) *Milk and milk products – Detection of thermonuclease produced by coagulasepositive staphylococci Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of low numbers of presumptive Bacillus cereus – Most probable number technique and detection method Paints and varnishes Paints and varnishes – Terms and definitions (Revision of ISO 4618-2:1999, ISO 4618-3:1999, ISO 4618-1:1998; ISO/DIS 4618-4) TC 37 ISO/DIS 1951 TC 44 ISO/DIS 22827-1 ISO/DIS 22827-2 TC 45 ISO/DIS 37 Terminology and other language resources *Presentation/representation of entries in dictionaries (Revision of ISO 1951:1997) Welding and allied processes Acceptance tests for Nd:YAG laser beam welding machines – Machines with optical fibre delivery – Part 1: Laser assembly Acceptance tests for Nd:YAG laser beam welding machines – Machines with optical fibre delivery – Part 2: Moving mechanism Rubber and rubber products *Rubber, vulcanized or thermoplastic – Determination of tensile stress-strain properties (Revision of ISO 37:1994) 2004-08-19 2004-07-26 2004-08-04 2004-08-16 2004-05-05 2004-08-03 2004-08-16 2004-08-05 2004-07-26 2004-08-25 2004-08-11 TC 35 ISO/DIS 4618 2004-08-18 2004-08-19 2004-08-25 2004-08-25 2004-08-10 ISO/DIS 248 ISO/DIS 1304 *Rubbers, raw – Determination of volatile-matter content (Revision of ISO 248:1991) Rubber compounding ingredients – Carbon black – Determination of iodine adsorption number (Revision of ISO 1304:1999) *Rubber, vulcanized – Antistatic and conductive products – Determination of electrical resistance (Revision of ISO 2878:1987) *Rubber, vulcanized – Determination of low-temperature characteristics – Temperature-retraction procedure (TR test) (Revision of ISO 2921:1997) *Rubber hoses and hose assemblies for water suction and discharge – Specification (Revision of ISO 4641:1991) *Rubber and plastics hose and hose assemblies with wire reinforcements – Hydraulic impulse test with flexing (Revision of ISO 6802:1991) *Rubber, vulcanized or thermoplastic – Hardness testing – Introduction and guide Chemistry *Carbonaceous materials used in the production of aluminium – Green and calcined coke – Determination of ash content (Revision of ISO 8005:1984) Plastics *Plastics – Polyethylene (PE) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties (Revision of ISO 1872-2:1997, ISO 1872-2:1997/Amd 1:2000) *Plastics – Differential scanning calorimetry (DSC) – Part 3: Determination of temperature and enthalpy of melting and crystallization – Amendment 1 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries 2004-08-02 2004-07-26 ISO/DIS 2878 2004-08-02 ISO/DIS 2921 2004-08-02 ISO/DIS 4641 2004-07-26 ISO/DIS 6802 2004-08-04 ISO/DIS 18517 TC 47 ISO/DIS 8005 2004-08-11 2004-08-03 TC 61 ISO/DIS 1872-2 2004-08-04 ISO 11357-3: 1999/DAmd 1 TC 67 2004-08-04 ISO/DIS 13628-7.2 *Petroleum and natural gas industries – Design and operation of subsea production systems – Part 7: Completion/workover riser systems ISO/DIS 19901-7 *Petroleum and natural gas industries – Specific requirements for offshore structures – Part 7: Stationkeeping systems for floating offshore structures and mobile offshore units Internal combustion engines Reciprocating internal combustion engines – Vocabulary of components and systems – Part 1: Structure and external covers (Revision of ISO 7967-1:1987) ISO/DIS 7967-4 Reciprocating internal combustion engines – Vocabulary of components and systems – Part 4: Pressure charging and air/exhaust gas ducting systems (Revision of ISO 7967-4:1988) ISO/DIS 7967-6 Reciprocating internal combustion engines – Vocabulary of components and systems – Part 6: Lubricating systems (Revision of ISO 7967-6:1992) ISO/DIS 7967-7 Reciprocating internal combustion engines – Vocabulary of components and systems – Part 7: Governing systems (Revision of ISO 7967-7:1998) ISO/DIS 7967-8 Reciprocating internal combustion engines – Vocabulary of components and systems – Part 8: Starting systems (Revision of ISO 7967-8:1994) 2004-05-10 2004-08-18 TC 70 ISO/DIS 7967-1 2004-08-09 2004-08-02 2004-08-02 2004-08-09 2004-08-09 TC 72 ISO/DIS 366-4 Textile machinery and machinery for dry-cleaning and industrial laundering Textile machinery and accessories – Reeds – Part 4: Dimensions and designations of plastic-bound metal reeds (Revision of ISO 366-4:1992) Textile machinery and accessories – Reeds – Part 5: Dimensions and designation of profil capsulas Textile machinery and accessories – Strip steel for dents of reeds – Part 1: Cold rolled strip steel (Revision of ISO 9473:1988) Textile machinery and accessories – Strip steel for dents of reeds – Part 2: Hardened strip steel (Revision of ISO 9473:1988) Dentistry *Dentistry – Casting and baseplate waxes Mechanical vibration and shock *Mechanical vibration and shock – Cold provocation tests for the assessment of peripheral vascular function – Part 1: Measurement and evaluation of finger skin temperature *Mechanical vibration and shock – Cold provocation tests for the assessment of peripheral vascular function – Part 2: Measurement and evaluation of finger systolic blood pressure Anaesthetic and respiratory equipment *Respiratory tract humidifiers for medical use – Particular requirements for respiratory humidification systems (Revision of ISO 8185:1997, ISO 8185:1997/Cor 1:2001) *Suction catheters for use in the respiratory tract (Revision of ISO 8836:1997) Earth-moving machinery *Earth-moving machinery – Determination of sound power level noise emissions – Stationary test conditions (Revision of ISO 6393:1998) *Earth-moving machinery – Determination of the emission sound pressure level at the operator's position – Stationary test conditions (Revision of ISO 6394:1998) *Earth-moving machinery – Determination of sound power level noise emissions – Dynamic test conditions (Revision of ISO 6395:1988, ISO 6395:1988/Amd 1:1996) *Earth-moving machinery – Determination of emission sound pressure level at operator's position – Dynamic test conditions (Revision of ISO 6396:1992) Fluid power systems Pneumatic fluid power – Connections – Ports and stud ends – Amendment 1 Air quality *Meteorology – Air temperature measurements – Test methods for comparing the performance of thermometer shields/screens and defining important characteristics Water quality *Water quality – Sampling – Part 6: Guidance on sampling of rivers and streams (Revision of ISO 5667-6:1990) 2004-08-12 2004-08-23 2004-08-17 2004-08-03 2004-08-11 2004-08-03 2004-08-04 2004-08-05 ISO/DIS 366-5 ISO/DIS 9473-1 2004-08-05 2004-08-05 ISO/DIS 9473-2 2004-08-05 TC 106 ISO/DIS 15854 TC 108 ISO/DIS 14835-1 ISO/DIS 14835-2 2004-08-03 TC 121 ISO/DIS 8185 ISO/DIS 8836 TC 127 ISO/DIS 6393 2004-08-23 ISO/DIS 6394 2004-08-03 ISO/DIS 6395 2004-08-03 ISO/DIS 6396 2004-08-03 TC 131 ISO 16030: 2001/DAmd 1 TC 146 ISO/DIS 17714 TC 147 ISO/DIS 5667-6 TC 150 ISO/DIS 16428.2 ISO 25539-1: 2003/DAmd 1 TC 156 ISO/DIS 12732 Implants for surgery Implants for surgery – Test solution and environmental conditions for static and dynamic corrosion and wear tests on implantable materials and medical devices *Cardiovascular implants – Endovascular devices – Part 1: Endovascular prostheses – Amendment 1: Test methods Corrosion of metals and alloys Corrosion of metals and alloys – Method for electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method) Ergonomics *3D scanning methodologies for internationally compatible anthropometric databases Mechanical testing of metals Metallic materials – Bend test (Revision of ISO 7438:1985) Optics and photonics 2004-05-03 2004-08-11 2004-08-04 2004-08-04 2004-05-10 2004-08-17 TC 159 ISO/DIS 20685 TC 164 ISO/DIS 7438 TC 172 ISO/DIS 17123-5.3 *Optics and optical instruments – Field procedures for testing geodetic and surveying instruments – Part 5: Electronic tacheometers TC 184 Industrial automation systems and integration ISO/DIS 14649-12 *Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 12: Process data for turning ISO/DIS 14649-121 *Industrial automation systems and integration – Physical device control – Data model for computerized numerical controllers – Part 121: Tools for turning ISO/DIS 16100-3 *Industrial automation systems and integration – Manufacturing software capability profiling for interoperability – Part 3: Interface services, protocols and capability templates Safety devices for protection against excessive pressure Safety devices for protection against excessive pressure – Part 3: Safety valves and bursting disc safety devices in combination (Revision of ISO 6718:1991) TC 198 ISO/DIS 11737-1 Sterilization of health care products *Sterilization of medical devices – Microbiological methods – Part 1: Determination of a population of microorganisms on products (Revision of ISO 11737-1:1995) ISO/DIS 13408-6 TC 206 ISO/DIS 20502 TC 219 ISO/DIS 24335 ISO/DIS 24336 ISO/DIS 24338 JTC 1 *Aseptic processing of health care products – Part 6: Isolator systems Fine ceramics *Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of adhesion of ceramic coatings by scratch testing Floor coverings Laminate floor coverings – Determination of impact resistance Laminate floor coverings – Determination of thickness swelling after partial immersion in water Laminate floor coverings – Determination of abrasion resistance Information technology 2004-08-16 2004-08-03 2004-08-02 TC 185 ISO/DIS 4126-3 2004-08-25 2004-08-11 2004-08-04 2004-08-04 2004-08-02 2004-08-03 2004-07-26 2004-07-26 ISO/IEC DIS 17341 *Information technology – Data interchange on 120 mm and 80 mm optical disk using +RW format – Capacity: 4,7 Gbytes and 1,46 Gbytes per side (Recording speed up to 4X) (Revision of ISO/IEC PRF 17341) ISO/IEC DIS 17344 *Information technology – Data interchange on 120 mm and 80 mm Optical disk using +R format – Capacity: 4,7 Gbytes and 1,46 Gbytes per side (Recording speed up to 4X) 2004-07-26 ISO/IEC DIS 17345 *Information technology – Data interchange on 130 mm rewritable and write once read many ultra density optical (UDO) disk cartridges – Capacity: 30 Gbytes per cartridge – First generation ISO/IEC DIS 17346 *Information technology – Data interchange on 90 mm optical disk cartridges – Capacity: 1,3 Gbytes per cartridge ISO/IEC DIS 21481 *Information technology – Telecommunications and information exchange between systems – Near Field Communication Interface and Protocol -2 (NFCIP-2) ISO/IEC DIS 23290 *Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Mapping functions for the tunnelling of QSIG through H.323 networks (Revision of ISO/IEC 23290:2002) 2004-07-26 2004-07-26 2004-08-11 2004-07-26 FDIS circulated Period from 21 February to 23 March 2004 These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown *Available in English only Vote terminates TC 2 ISO/FDIS 10684 TC 5 ISO/FDIS 16132 TC 6 ISO/FDIS 302 ISO/FDIS 11475 Fasteners Fasteners – Hot dip galvanized coatings Ferrous metal pipes and metallic fittings Seal coats for cement mortar linings Paper, board and pulps * Pulps – Determination of Kappa number (Revision of ISO 302:1981) Paper and board – Determination of CIE whiteness, D65/10 degrees (outdoor daylight) (Revision of ISO 11475:1999) TC 8 ISO/FDIS 15749-4 TC 10 ISO/FDIS 129-1 Ships and marine technology * Ships and marine technology – Drainage systems on ships and marine structures – Part 4: Sanitary drainage, sewage disposal pipes Technical product documentation Technical drawings – Indication of dimensions and tolerances – Part 1: General principles (Revision of ISO 129:1985; ISO 406:1987) TC 20 ISO/FDIS 15859-1 ISO/FDIS 15859-10 ISO/FDIS 15859-11 ISO/FDIS 15859-12 ISO/FDIS 15859-13 ISO/FDIS 15859-2 Aircraft and space vehicles Space systems – Fluid characteristics, sampling and test methods – Part 1: Oxygen Space systems – Fluid characteristics, sampling and test methods – Part 10: Water Space systems – Fluid characteristics, sampling and test methods – Part 11: Ammonia Space systems – Fluid characteristics, sampling and test methods – Part 12: Carbon dioxide Space systems – Fluid characteristics, sampling and test methods – Part 13: Breathing air Space systems – Fluid characteristics, sampling and test methods – Part 2: Hydrogen 2004-04-26 2004-04-26 2004-04-26 2004-04-26 2004-04-26 2004-04-26 2004-05-04 2004-05-04 2004-05-12 2004-05-15 2004-05-16 2004-04-26 15859-2 ISO/FDIS 15859-3 ISO/FDIS 15859-4 ISO/FDIS 15859-5 ISO/FDIS 15859-6 ISO/FDIS 15859-7 ISO/FDIS 15859-8 ISO/FDIS 15859-9 TC 22 ISO/FDIS 6969 ISO/FDIS 13216-2 TC 23 ISO/FDIS 11783-6 TC 28 ISO/FDIS 13737 TC 29 ISO/FDIS 1832 ISO/FDIS 16462 ISO/FDIS 16463 TC 34 ISO/FDIS 1735 Hydrogen Space systems – Fluid characteristics, sampling and test methods – Part 3: Nitrogen Space systems – Fluid characteristics, sampling and test methods – Part 4: Helium Space systems – Fluid characteristics, sampling and test methods – Part 5: Nitrogen tetroxide propellants Space systems – Fluid characteristics, sampling and test methods – Part 6: Monomethylhydrazine propellant Space systems – Fluid characteristics, sampling and test methods – Part 7: Hydrazine propellant Space systems – Fluid characteristics, sampling and test methods – Part 8: Kerosine propellant Space systems – Fluid characteristics, sampling and test methods – Part 9: Argon Road vehicles Road vehicles – Sound signalling devices – Tests after mounting on vehicle (Revision of ISO 6969:1999) Road vehicles – Anchorages in vehicles and attachments to anchorages for child restraint systems – Part 2: Top tether anchorages and attachments Tractors and machinery for agriculture and forestry Tractors and machinery for agriculture and forestry – Serial control and communications data network – Part 6: Virtual terminal Petroleum products and lubricants Petroleum products and lubricants – Determination of low-temperature cone penetration of lubricating greases Small tools Indexable inserts for cutting tools – Designation (Revision of ISO 1832:1991, ISO 1832:1991/Amd 1:1999; ISO 1832:1991/DAmd 2) Cubic boron nitride inserts, tipped or solid – Dimensions, types Polycristalline diamond inserts, tipped – Dimensions, types Food products Cheese and processed cheese products – Determination of fat content – Gravimetric method (Reference method) (Revision of ISO 1735:1987) Sensory analysis – Methodology – Triangle test (Revision of ISO 4120:1983) Dried milk – Determination of moisture content (Reference method) Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of presumptive Bacillus cereus – Colony-count technique at 30 degrees C (Revision of ISO 7932:1993, ISO 7932:1993/Cor 1:1997; ISO 7932:1993/DAmd 1) 2004-05-18 2004-05-04 2004-05-04 2004-05-11 2004-05-04 2004-04-26 2004-05-23 2004-05-15 2004-04-26 2004-04-26 2004-04-26 2004-04-26 2004-04-26 2004-04-26 2004-04-26 ISO/FDIS 4120 ISO/FDIS 5537 ISO/FDIS 7932 2004-05-09 2004-05-04 2004-05-11 ISO/FDIS 10399 ISO/FDIS 16820 ISO/FDIS 18593 TC 35 ISO/FDIS 19840.2 Sensory analysis – Methodology – Duo-trio test (Revision of ISO 10399:1991) Sensory analysis – Methodology – Sequential analysis Microbiology of food and animal feeding stuffs – Horizontal methods for sampling techniques from surfaces using contact plates and swabs Paints and varnishes * Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Measurement of, and acceptance criteria for, the thickness of dry film on rough surfaces 2004-05-09 2004-05-09 2004-05-04 2004-05-18 19840.2 TC 36 ISO/FDIS 2467 dry film on rough surfaces Cinematography Cinematography – Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints – Positions and dimensions (Revision of ISO 2467:1980) Cinematography – Audio head tones for use in international exchange of 35 mm analogue magnetic film masters – Specifications and location (Revision of ISO 12611:1997) Acoustics 2004-05-18 2004-05-18 2004-05-04 ISO/FDIS 12611 2004-04-26 TC 43 ISO/FDIS 140-14 * Acoustics – Measurement of sound insulation in buildings and of building elements – Part 14: Guidelines for special situations in the field ISO/FDIS 10052 TC 44 ISO/FDIS 14174 ISO/FDIS 18278-1 ISO/FDIS 18278-2 TC 48 ISO/FDIS 4797 TC 54 ISO/FDIS 4724 ISO/FDIS 4733 ISO/FDIS 21389 TC 61 ISO/FDIS 844 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method Welding and allied processes Welding consumables – Fluxes for submerged arc welding – Classification Resistance welding – Weldability – Part 1: Assessment of weldability for resistance spot, seam and projection welding of metallic materials Resistance welding – Weldability – Part 2: Alternative procedures for the assessment of sheet steels for spot welding Laboratory glassware and related apparatus Laboratory glassware – Boiling flasks with conical ground joints (Revision of ISO 4797:1981) Essential oils Oil of cedarwood, Virginian type (Juniperus virginiana L.) (Revision of ISO 4724:1984) Oil of cardamom [Elettaria cardamomum (L.) Maton] (Revision of ISO 4733:1981) Oil of gum turpentine, Chinese type (mainly from Pinus massoniana Lamb.) Plastics * Rigid cellular plastics – Determination of compression properties (Revision of ISO 844:2001) ISO/FDIS 1209-1 * Rigid cellular plastics – Determination of flexural properties – Part 1: Basic bending test (Revision of ISO 1209-1:1990) ISO/FDIS 1209-2 * Rigid cellular plastics – Determination of flexural properties – Part 2: Determination of flexural strength and apparent flexural modulus of elasticity (Revision of ISO 1209-2:1990) ISO 4613-2: 1995/FDAmd 1 ISO/FDIS 8256 ISO/FDIS 16012 ISO/PRF 17212 Plastics – Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties – Amendment 1 Plastics – Determination of tensile-impact strength (Revision of ISO 8256:1990, ISO 8256:1990/Cor 1:1991) Plastics – Determination of linear dimensions of test specimens * Structural adhesives – Guidelines for the surface preparation of metals and plastics prior to adhesive bonding (Revision of ISO 13895:1996, ISO 4588:1995) TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries 2004-05-12 2004-05-18 2004-05-18 2004-05-04 2004-05-04 2004-05-09 2004-05-09 2004-04-26 2004-05-04 2004-05-04 2004-05-18 2004-05-11 2004-05-23 9999-01-01 ISO/FDIS 10417 * Petroleum and natural gas industries – Subsurface safety valve systems – Design, installation, operation and redress 2004-05-04 Design, installation, operation and redress (Revision of ISO 10417:1993) TC 71 Concrete, reinforced concrete and pre-stressed concrete 2004-05-10 (Revision of ISO 2736-1:1986) TC 85 ISO/FDIS 6962 Nuclear energy Nuclear energy – Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste (Revision of ISO 6962:1982) ISO/FDIS 10981 Nuclear fuel technology – Determination of uranium in reprocessing- plant dissolver solution – Liquid chromatography method (Revision of ISO 10981:1993) ISO/FDIS 22188 TC 106 ISO/FDIS 6360-4 ISO/FDIS 6360-6 ISO/FDIS 21530 TC 107 ISO/FDIS 12683 Monitoring for inadvertent movement and illicit trafficking of radioactive material Dentistry Dentistry – Number coding system for rotary instruments – Part 4: Specific characteristics of diamond instruments Dentistry – Number coding system for rotary instruments – Part 6: Specific characteristics of abrasive instruments Dentistry – Materials used for dental equipment surfaces – Determination of resistance to chemical disinfectants Metallic and other inorganic coatings Mechanically deposited coatings of zinc – Specification and test methods 2004-05-18 2004-05-25 2004-05-04 2004-05-04 2004-05-04 2004-05-04 2004-04-26 2004-05-04 ISO/FDIS 1920-1 * Testing of concrete – Part 1: Sampling of fresh concrete ISO/FDIS 17836 * Thermal spraying – Determination of the deposition efficiency for thermal spraying TC 111 ISO/FDIS 2415 ISO/FDIS 16798 TC 115 Round steel link chains, chain slings, components and accessories Forged shackles for general lifting purposes – Dee shackles and bow shackles (Revision of ISO 2415:1987) Links of Grade 8 for use with slings Pumps 2004-05-19 2004-05-17 2004-05-18 ISO/FDIS 13710 * Petroleum, petrochemical and natural gas industries – Reciprocating positive displacement pumps TC 121 ISO/FDIS 10651-2 Anaesthetic and respiratory equipment Lung ventilators for medical use – Particular requirements for basic safety and essential performance – Part 2: Home care ventilators for ventilator-dependent patients (Revision of ISO 10651-2:1996) ISO/FDIS 10651-6 TC 122 ISO/FDIS 21898 TC 131 ISO/FDIS 16656 ISO/FDIS 16874 ISO/FDIS 17082 ISO/FDIS 21287 Lung ventilators for medical use – Particular requirements for basic safety and essential performance – Part 6: Home-care ventilatory support devices (Revision of ISO 10651-2:1996) Packaging Packaging – Flexible intermediate bulk containers (FIBCs) for non-dangerous goods Fluid power systems Hydraulic fluid power – Single rod short-stroke cylinders with bores from 32 mm to 100 mm for use at 10 MPa (100 bar) – Mounting dimensions Hydraulic fluid power – Identification of manifold assemblies and their components Pneumatic fluid power – Valves – Data to be included in supplier literature Pneumatic fluid power – Cylinders – Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm 2004-04-26 2004-04-26 2004-05-23 2004-05-09 2004-05-10 2004-05-04 2004-05-22 TC 138 ISO/FDIS 8796 Plastics pipes, fittings and valves for the transport of fluids Polyethylene PE 32 and PE 40 pipes for irrigation laterals – Susceptibility to environmental stress cracking induced by insert-type fittings – Test method and requirements (Revision of ISO 8796:1989) Thermoplastics valves for industrial applications – Pressure test methods and requirements – Part 1: General (Revision of ISO 9393-1:1994) Plastics pipes and fittings – Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels – Metric series – Specifications – Part 2: Fittings for heat-fusion jointing Air quality Indoor air – Part 2: Sampling strategy for formaldehyde Water quality * Water quality – Determination of phosphorus – Ammonium molybdate spectrometric method (Revision of ISO 6878:1998) Implants for surgery 2004-05-19 2004-04-26 2004-05-19 2004-05-15 ISO/FDIS 9393-1 2004-05-18 ISO/FDIS 14531-2 TC 146 ISO/FDIS 16000-2 TC 147 ISO/FDIS 6878 2004-05-18 TC 150 ISO/FDIS 16429 * Implants for surgery – Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods TC 153 ISO/FDIS 10434 Valves Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (Revision of ISO 10434:1998) TC 156 ISO/FDIS 21207 TC 163 Corrosion of metals and alloys Corrosion tests in artificial atmospheres – Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying Thermal performance and energy use in the built environment 2004-05-18 2004-04-26 ISO/FDIS 13791 * Thermal performance of buildings – Calculation of internal temperatures of a room in summer without mechanical cooling – General criteria and validation procedures TC 165 ISO/FDIS 22157-1 TC 182 ISO/FDIS 14688-2.2 TC 190 ISO/FDIS 11275 ISO/FDIS 15175 ISO/FDIS 16772 TC 209 ISO/FDIS 14644-7 TC 212 Timber structures * Bamboo – Determination of physical and mechanical properties – Part 1: Requirements Geotechnics * Geotechnical investigation and testing – Identification and classification of soil – Part 2: Principles for a classification Soil quality Soil quality – Determination of unsaturated hydraulic conductivity and waterretention characteristic – Wind's evaporation method Soil quality – Characterization of soil related to groundwater protection Soil quality – Determination of mercury in aqua regia soil extracts with coldvapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry Cleanrooms and associated controlled environments Cleanrooms and associated controlled environments – Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments) Clinical laboratory testing and in vitro diagnostic test systems 2004-05-04 2004-04-26 2004-05-18 2004-05-15 2004-04-26 2004-05-04 2004-05-18 ISO/FDIS 15198 * Clinical laboratory medicine – In vitro diagnostic medical devices – Validation of user quality control procedures by the manufacturer 2004-05-11 TC 213 ISO/FDIS 1101.2 Dimensional and geometrical product specifications and verification Geometrical Product Specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out (Revision of ISO 1101:1983) Health informatics 2004-05-10 2004-05-25 Committee on conformity assessment * Conformity assessment – General requirements for accreditation bodies accrediting conformity assessment bodies (Revision of ISO/IEC Guide 58:1993, ISO/IEC Guide 61:1996, ISO/IEC TR 17010:1998) 2004-05-11 TC 215 CASCO ISO/IEC FDIS 17011 ISO/FDIS 17120 * Health informatics – Country identifier standards JTC 1 ISO/IEC FDIS 7811-7 Information technology * Identification cards – Recording technique – Part 7: Magnetic stripe – High coercivity, high density 2004-05-04 2004-04-26 ISO/IEC 7816-2: * Information technology – Identification cards – Integrated circuit(s) cards with 1999/FDAmd 1 contacts – Part 2: Dimensions and location of the contacts – Amendment 1: Assignment of contacts C4 and C8 ISO/IEC FDIS 7816-8 ISO/IEC FDIS 7816-9 ISO/IEC FDIS 11581-5 ISO/IEC 12207: 1995/FDAmd 2 ISO/IEC 13818-1:2000/ FDAmd 3 ISO/IEC FDIS 14496-18 ISO/IEC FDIS 14496-19 * Identification cards – Integrated circuit cards – Part 8: Commands for security operations (Revision of ISO/IEC 7816-8:1999) * Identification cards – Integrated circuit cards – Part 9: Commands for card management (Revision of ISO/IEC 7816-9:2000) * Information technology – User system interfaces and symbols – Icon symbols and functions – Part 5: Tool icons * Information technology – Software life cycle processes – Amendment 2 * Information technology – Generic coding of moving pictures and associated audio information: Systems – Part 1: – Amendment 3 * Information technology – Coding of audio-visual objects – Part 18: Font compression and streaming * Information technology - Coding of audio-visual objects – Part 19: Synthesized texture stream 2004-04-26 2004-04-26 2004-04-26 2004-05-01 2004-04-26 2004-05-11 2004-05-18 Standards published New International Standards published between 21 February and 23 March 2004 *Available in English only ** French version of standard previously published in English only Price group CIE ISO 15469:2004 ISO/TS 17226: 2003** TC 2 ISO 4762:2004 ISO 10642:2004 ISO 21269:2004 International Commission on Illumination * Spatial distribution of daylight – CIE standard general sky Leather – Chemical tests – Determination of formaldehyde content Fasteners Hexagon socket head cap screws Hexagon socket countersunk head screws Hexagon socket head cap screws with metric fine pitch thread F D D D E TC 5 ISO 15465:2004 TC 10 ISO 7200:2004 TC 17 ISO 6930-2: 2004 TC 20 ISO 14619: 2003** TC 21 TC 22 ISO 6519:2004 ISO 11898-1: 2003** ISO/TR 12350: 2004 ISO 15765-1: 2004 ISO 16845:2004 ISO/TS 16951: 2004 TC 23 ISO 5674:2004 ISO 8224-1: 2003** ISO 17612:2004 ISO 22368-1: 2004 ISO 22368-2: 2004 ISO 22368-3: 2004 TC 28 ISO 3679:2004 ISO 3680:2004 ISO 20844:2004 ISO 20846:2004 ISO 20847:2004 Ferrous metal pipes and metallic fittings Pipework – Stripwound metal hoses and hose assemblies Technical product documentation Technical product documentation – Data fields in title blocks and document headers Steel High yield strength steel plates and wide flats for cold forming – Part 2: Delivery condition for normalized, normalized rolled and as-rolled steels Aircraft and space vehicles Space systems – Space experiments – General requirements Equipment for fire protection and fire fighting V B S M B W N Road vehicles * Diesel engines – Fuel injection pumps – Tapers for shaft ends and hubs Road vehicles – Controller area network (CAN) – Part 1: Data link layer and physical signalling * Road vehicles - Injury risk curves for evaluation of occupant protection in side impact Road vehicles – Diagnostics on Controller Area Networks (CAN) – Part 1: General information Road vehicles – Controller area network (CAN) – Conformance test plan * Road vehicles – Ergonomic aspects of transport information and control systems (TICS) – Procedures for determining priority of on-board messages presented to drivers Tractors and machinery for agriculture and forestry Tractors and machinery for agriculture and forestry – Guards for power take-off (PTO) drive-shafts – Strength and wear tests and acceptance criteria Traveller irrigation machines – Part 1: Operational characteristics and laboratory and field test methods * Tractors and machinery for agriculture and forestry – Auxiliary-power-transmission connector for the operator station Crop protection equipment – Test methods for the evaluation of cleaning systems – Part 1: Internal cleaning of complete sprayers Crop protection equipment – Test methods for the evaluation of cleaning systems – Part 2: External cleaning of sprayers Crop protection equipment – Test methods for the evaluation of cleaning systems – Part 3: Internal cleaning of tank Petroleum products and lubricants Determination of flash point – Rapid equilibrium closed cup method Determination of flash/no flash – Rapid equilibrium closed cup method Petroleum and related products – Determination of the shear stability of polymercontaining oils using a diesel injector nozzle Petroleum products – Determination of sulfur content of automotive fuels – Ultraviolet fluorescence method Petroleum products – Determination of sulfur content of automotive fuels – Energy- dispersive X-ray fluorescence spectrometry J J E F F L R D B D C F F C G ISO 7240-15: 2004 * Fire detection and alarm systems – Part 15: Multisensor fire detectors ISO 20884:2004 TC 29 ISO 8764-2: 2004 Petroleum products – Determination of sulfur content of automotive fuels – Wavelength-dispersive X-ray fluorescence spectrometry Small tools Assembly tools for screws and nuts – Screwdrivers for cross-recessed head screws – Part 2: General requirements, lengths of blades and marking of hand-operated screwdrivers D B ISO 16916:2004 TC 33 ISO 12677: 2003** TC 34 Tools for moulding – Tool specification sheet for injection moulds Refractories Chemical analysis of refractory products by XRF – Fused cast bead method Food products D W free E L ISO 3720:1986/ Cor * Black tea – Definition and basic requirements – Technical Corrigendum 2 2:2004 ISO/TS 6090: 2004 * Milk and dried milk, buttermilk and buttermilk powder, whey and whey powder – Detection of phosphatase activity ISO 21572:2004 TC 35 ISO 15880: 2000** TC 38 ISO 16663-2: 2003** TC 39 ISO 13041-1: 2004 TC 43 ISO 15665: 2003/Cor 1: 2004 TC 44 ISO 14327:2004 ISO 15614-5: 2004 ISO 18273:2004 ISO 18274:2004 TC 45 ISO 35:2004 ISO 5470-2: 2003** ISO 11344:2004 ISO 13363:2004 TC 51 ISO 8611-1: 2004 TC 61 ISO 1183-1: 2004** ISO 2580-2: 2003** ISO 2897-2: 2003** ISO 9773:1998/ Amd 1:2003** ISO 10366-2: 2003** Foodstuffs – Methods for the detection of genetically modified organisms and derived products – Protein based methods Paints and varnishes Paints, varnishes and binders – Determination of MEQ value of water- based coating materials and binders Textiles Fishing nets – Method of test for the determination of mesh size – Part 2: Length of mesh Machine tools Test conditions for numerically controlled turning machines and turning centres – Part 1: Geometric tests for machines with a horizontal workholding spindle Acoustics Acoustics – Acoustic insulation for pipes, valves and flanges – Technical Corrigendum 1 Welding and allied processes Resistance welding – Procedures for determining the weldability lobe for resistance spot, projection and seam welding Specification and qualification of welding procedures for metallic materials – Welding procedure test – Part 5: Arc welding of titanium, zirconium and their alloys Welding consumables – Wire electrodes, wires and rods for welding of aluminium and aluminium alloys – Classification Welding consumables – Wire and strip electrodes, wires and rods for arc welding of nickel and nickel alloys – Classification Rubber and rubber products Natural rubber latex concentrate – Determination of mechanical stability Rubber- or plastics-coated fabrics – Determination of abrasion resistance – Part 2: Martindale abrader * Rubber, raw synthetic – Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography * Rubber and plastics hoses for marine-engine wet-exhaust systems – Specification Pallets for unit load method of materials handling Pallets for materials handling – Flat pallets – Part 1: Test methods Plastics Plastics – Methods for determining the density of non-cellular plastics – Part 1: Immersion method, liquid pyknometer method and titration method Plastics – Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties Plastics – Impact-resistant polystyrene (PS-I) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties Plastics – Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source – Amendment 1: Specimens Plastics – Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials – Part 2: Preparation of test specimens and determination of properties B B Q free G L C K B D K E N E D XZ D properties ISO 11402:2004 * Phenolic, amino and condensation resins – Determination of free-formaldehyde content F D ISO 11403-2: 2004 * Plastics – Acquisition and presentation of comparable multipoint data – Part 2: Thermal and processing properties TC 63 ISO 7458:2004 ISO 7459:2004 ISO 8113:2004 TC 67 Glass containers Glass containers – Internal pressure resistance – Test methods Glass containers – Thermal shock resistance and thermal shock endurance – Test methods Glass containers – Resistance to vertical load – Test method Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries G XA B C A ISO 10426-4: 2004 * Petroleum and natural gas industries – Cements and materials for well cementing – Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure ISO 10437: 2003** TC 68 ISO/TR 9564-4: 2004 ISO 16609:2004 TC 70 ISO 14314:2004 TC 76 ISO 15747: 2003** TC 83 ISO 11087:2004 TC 85 ISO 17874-1: 2004 TC 89 ISO 17064:2004 TC 96 ISO/TR 16880: 2004 TC 100 ISO 606:2004 TC 106 ISO 3823-2: 2003** ISO 6360-1: 2004 ISO 14233: 2003** ISO 14356: 2003** ISO 14801: 2003** TC 121 ISO 5362: 2000** ISO 5366-3: 2001** Petroleum, petrochemical and natural gas industries – Steam turbines – Specialpurpose applications Financial services * Banking – Personal Identification Number (PIN) management and security – Part 4: Guidelines for PIN handling in open networks * Banking – Requirements for message authentication using symmetric techniques Internal combustion engines Reciprocal internal combustion engines – Recoil starting equipment – General safety requirements Transfusion, infusion and injection equipment for medical and pharmaceutical use Plastics containers for intravenous injection Sports and recreational equipment Alpine ski-bindings – Retention devices – Requirements and test methods Nuclear energy Remote handling devices for radioactive materials – Part 1: General requirements Wood-based panels * Wood-based panels – Fibreboard, particleboard and oriented strand board (OSB) – Vocabulary Cranes * Cranes – Bridge and gantry cranes – International Standards for design and manufacturing requirements and recommendations Chains and chain wheels for power transmission and conveyors Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets Dentistry Dentistry – Rotary bur instruments – Part 2: Finishing burs * Dentistry – Number coding system for rotary instruments – Part 1: General characteristics Dentistry – Polymer-based die materials Dentistry – Duplicating material Dentistry – Fatigue test for endosseous dental implants Anaesthetic and respiratory equipment Anaesthetic reservoir bags Anaesthetic and respiratory equipment – Tracheostomy tubes – Part 3: Paediatric tracheostomy tubes C N C H E M A D N S K E P D F F ISO 15001: 2003** TC 127 ISO 6746-2: 2003/Cor 1: 2004 ISO 7132: 2003** ISO 12510:2004 ISO 14401-1: 2004 ISO 14401-2: 2004 TC 130 ISO 2836:2004 TC 135 ISO 18175:2004 TC 138 ISO/TS 15874-7:2003** ISO/TS 15875-7:2003** ISO/TS 15876-7:2003** ISO/TS 15877-7:2003** TC 146 Anaesthetic and respiratory equipment – Compatibility with oxygen Earth-moving machinery Earth-moving machinery – Definitions of dimensions and codes – Part 2: Equipment and attachments – Technical Corrigendum 1 Earth-moving machinery – Dumpers – Terminology and commercial specifications Earth-moving machinery – Operation and maintenance – Maintainability guidelines Earth-moving machinery – Field of vision of surveillance and rear-view mirrors – Part 1: Test methods Earth-moving machinery – Field of vision of surveillance and rear-view mirrors – Part 2: Performance criteria Graphic technology * Graphic technology – Prints and printing inks – Assessment of resistance of prints to various agents Non-destructive testing * Non-destructive testing – Evaluating performance characteristics of ultrasonic pulseecho testing systems without the use of electronic measurement instruments Plastics pipes, fittings and valves for the transport of fluids Plastics piping systems for hot and cold water installations – Polypropylene (PP) – Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations – Crosslinked polyethylene (PE-X) – Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations – Polybutylene (PB) – Part 7: Guidance for the assessment of conformity Plastics piping systems for hot and cold water installations – Chlorinated poly(vinyl chloride) (PVC-C) – Part 7: Guidance for the assessment of conformity Air quality R free N F B E D L F F F F ISO 16000-6: 2004 * Indoor air – Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID TC 171 ISO 446:2004 TC 172 ISO 10110-17: 2004 TC 184 ISO 9409-1: 2004 Document management applications * Micrographics – ISO character and ISO test chart No. 1 – Description and use Optics and photonics Optics and photonics – Preparation of drawings for optical elements and systems – Part 17: Laser irradiation damage threshold Industrial automation systems and integration Manipulating industrial robots – Mechanical interfaces – Part 1: Plates M D B C P ISO 15531-1: 2004 * Industrial automation systems and integration – Industrial manufacturing management data – Part 1: General overview TC 185 ISO 4126-1: 2004 ISO 4126-4: 2004 ISO 4126-7: 2004 TC 188 ISO 14945:2004 TC 190 ISO 16133:2004 TC 193 ISO 6974-2: 2001** Safety devices for protection against excessive pressure Safety devices for protection against excessive pressure – Part 1: Safety valves Safety devices for protection against excessive pressure – Part 4: Pilot-operated safety valves Safety devices for protection against excessive pressure – Part 7: Common data Small craft Small craft – Builder's plate Soil quality Soil quality – Guidance on the establishment and maintenance of monitoring programmes Natural gas Natural gas – Determination of composition with defined uncertainty by gas chromatography – Part 2: Measuring-system characteristics and statistics for processing of data M M Q C Q M chromatography – Part 2: Measuring-system characteristics and statistics for processing of data TC 194 ISO 10993-1: 2003** TC 198 ISO 17664:2004 TC 202 ISO 16700:2004 TC 212 ISO 15197: 2003** TC 213 ISO/TS 15530-3:2004 TC 215 ISO 22857:2004 JTC 1 ISO/IEC 7816-11:2004 ISO/IEC TR 9126-4:2004 ISO/IEC 10118-3:2004 Biological evaluation of medical devices Biological evaluation of medical devices – Part 1: Evaluation and testing Sterilization of health care products * Sterilization of medical devices – Information to be provided by the manufacturer for the processing of resterilizable medical devices Microbeam analysis * Microbeam analysis – Scanning electron microscopy – Guidelines for calibrating image magnification Clinical laboratory testing and in vitro diagnostic test systems In vitro diagnostic test systems – Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus Dimensional and geometrical product specifications and verification * Geometrical Product Specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement – Part 3: Use of calibrated workpieces or standards Health informatics * Health informatics – Guidelines on data protection to facilitate trans-border flows of personal health information Information technology * Identification cards – Integrated circuit cards – Part 11: Personal verfication through biometric methods * Software engineering – Product quality – Part 4: Quality in use metrics * Information technology – Security techniques – Hash-functions – Part 3: Dedicated hash-functions Q U X free U H Q H J G ISO/IEC * Information technology – Metadata registries (MDR) – Part 3: Registry metamodel and 11179-3:2003/ Cor basic attributes – Technical Corrigendum 1 1:2004 ISO/IEC TR 14143-5:2004 ISO/IEC 14772-2:2004 * Information technology – Software measurement – Functional size measurement – Part 5: Determination of functional domains for use with functional size measurement * Information technology – Computer graphics and image processing – The Virtual Reality Modeling Language (VRML) – Part 2: External authoring interface (EAI) N T free ISO/IEC * Information technology – Multimedia content description interface – Part 3: Visual – 15938-3:2002/ Cor Technical Corrigendum 1 1:2004 ISO/IEC 15948: 2004 ISO/IEC TR 20943-3:2004 ISO/IEC 21000-5:2004 * Information technology – Computer graphics and image processing – Portable Network Graphics (PNG): Functional specification * Information technology – Procedures for achieving metadata registry content consistency – Part 3: Value domains * Information technology – Multimedia framework (MPEG-21) – Part 5: Rights Expression Language W Q XB Standards confirmed The following International Standards are confirmed for a five year period: TC 17 ISO 683-1:1987 ISO 683-10:1987 Steel (reconfirmed) (reconfirmed) ISO 683-11:1987 ISO 683-9:1988 ISO 4954:1993 ISO/TR 11637:1997 ISO 11692:1994 TC 45 ISO 1823-1:1997 ISO 1823-2:1997 ISO 4672:1997 ISO 5772:1998 ISO 7751:1991 ISO 11424:1996 ISO 11425:1996 TC 86 ISO 13256-1:1998 ISO 13256-2:1998 ISO 13261-1:1998 ISO 13261-2:1998 TC 108 ISO 1940-2:1997 ISO 5347-10:1993 ISO 5347-12:1993 ISO 5347-13:1993 ISO 5347-14:1993 ISO 5347-15:1993 ISO 5347-16:1993 ISO 5347-17:1993 ISO 5347-18:1993 ISO 5347-19:1993 ISO 5347-5:1993 ISO 5347-7:1993 ISO 5347-8:1993 ISO 5348:1998 ISO 16063-1:1998 TC 147 ISO/TR 11905-2: 1997 TC 150 ISO 14602:1998 TC 213 ISO 1119:1998 ISO 2538:1998 ISO 3650:1998 ISO 4291:1985 ISO 5458:1998 ISO 8785:1998 (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) Rubber and rubber products Refrigeration and air-conditioning Mechanical vibration and shock (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) (reconfirmed) Water quality Implants for surgery Dimensional and geometrical product specifications and verification (reconfirmed) ISO 13565-3:1998 ISO 14253-1:1998 Standards withdrawn Period from 21 February to 23 March 2004 TC 5 ISO 7657:1995 ISO 7658:1984 ISO 8444:1985 ISO 8445:1995 ISO 8446:1995 ISO 8447:1986 ISO 8448:1986 ISO 8449:1995 ISO 8450:1986 TC 23 ISO 5674-1:1992 ISO 5674-2:1992 TC 35 ISO 9020:1994 TC 61 ISO 9397:1995 TC 68 ISO 8730:1990 ISO 8731-1:1987 ISO 8731-2:1992 ISO 9807:1991 TC 100 ISO 1395:1977 TC 112 ISO 3753:1977 TC 130 ISO 2837:1996 ISO 11628:1995 TC 171 ISO 1116:1999 ISO 6343:1981 JTC 1 ISO 8372:1987 ISO/IEC 14536: 1995 Information technology Graphic technology (replaced by ISO 2836:2004) (replaced by ISO 2836:2004) Document management applications Ferrous metal pipes and metallic fittings (replaced by ISO 15465:2004) (replaced by ISO 15465:2004) (replaced by ISO 15465:2004) (replaced by ISO 15465:2004) (replaced by ISO 15465:2004) (replaced by ISO 15465:2004) (replaced by ISO 15465:2004) (replaced by ISO 15465:2004) (replaced by ISO 15465:2004) Tractors and machinery for agriculture and forestry (replaced by ISO 5674:2004) (replaced by ISO 5674:2004) Paints and varnishes (replaced by ISO 11402:2004) Plastics (replaced by ISO 11402:2004) Financial services (replaced by ISO 16609:2004) (replaced by ISO 16609:2004) (replaced by ISO 16609:2004) (replaced by ISO 16609:2004) Chains and chain wheels for power transmission and conveyors (replaced by ISO 606:2004) Vacuum technology