P R O D U C T S | 2 0 1 2 joiners’ hardware handbook new uni qu e • IN N OVATION CONTENTS Contents 1. 1.1 1.2 1.3 1.4 1.5 2. 2.1 2.2 2.3 2.4 2.5 2.6 3. 3.1 3.2 4. 4.1 5. 5.1 5.2 5.3 5.4 5.5 5.6 6. 6.1 6.2 6.3 6.4 6.5 6.6 6.7 6.8 6.9 6.10 6.11 7. 7.1 8. 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 8.10 7. 7.1 DECORATIVE HARDWARE Aluminium & Stainless Steel Handles & Knobs Contemporary Handles & Knobs Wooden Handles Antique Handles & Knobs Aluminium Finger Grips TABLE LEGS Kitchen Table Legs Office Table Legs Aluminium Legs Universal Consols & Couch Feet Cabinet & Couch Feet Aluminium Frame Components DOORS Aluminium Sliding Door System Aluminium Glass Door Profiles P4, P6 and P7 SIBU Decorative Structure Sheets CABINET ORGANISERS & ACCESSORIES Cabinet Organisers Wire Organisers Drawer Organisers - Adjustable Cutlery Trays Lighting Solutions Shelf Supports Floating Cabinet Brackets HARDWARE Wire Management Wire Management & Vents Knock Down Fittings Brackets & Connectors Hinges Office Hardware Castors Nails, Rumber Nuts, Screws & Bolts Catches, Escutcheons & Locks Door Lifts Full Extension Drawer Slides & Damping Systems HARN Drawer Systems SALICE General Instructions Series 800 Series 200 Series 700 - Silentia Series Push Series 200 for Glass Doors Lift Systems - Single Flap Doors Lift Systems - Folding Doors Lift Systems - Parallel Opening System Accessories MAPS Raiël Maps Page 02 - 05 06 - 15 16 17 18 - 21 22 23 24 25 - 27 28 - 29 30 - 31 32 - 33 34 35 36 - 37 38 - 42 43 44 - 47 48 - 49 50 - 51 52 53 54 - 55 56 57 58 - 59 60 61 62 63 64 65 66 - 68 69 70 71 72 - 74 75 76 - 79 80 - 83 84 - 86 87 88 Finish Description Antique Brass Anodised Gold Antique Iron Black Antique Nickel Antique Pewter Antique Silver Matt Black Black Black Nickel Brushed Satin Nickel Bright Silver Brushed Nickel Brass Cast Iron Chrome Dull Bronze Dull Satin Nickel Gun Blue Matt Chrome Matt Nickel Matt Silver Natural Anodised Oak Natural/Light Oak Dark/Black Oxidised Tin Polished Brass Pearl Silver Red Rust Satin Chrome Matt Stainless Steel Silver Powder Cote Silver Vein White Symbol Description Centre to Centre Measurement Length Width Height Ø Diameter Knob Height Square Knob - all sides are equal Square Knob’s Height Unit Width To Edge We reserve the right to change any technical specifications without prior notice. The photos may differ from the actual product. 1 DECORATIVE HARDWARE 1.1 Aluminium & Stainless Steel Handles & Knobs Item No: 460 Slope Handle with Cut-Out 160 184 8 34 new new new RAH752 RAH751 RAH753 8 Item No: 465 Bullet D-Handle 160 190 12 32 12 new new RAH755 RAH754 Item No: 457 L-Grip 32 42 11 20 128 138 11 20 RAH767 RAH766 20 new new RAH765 RAH764 Item No: 1520 40 Euro Grip 95 x 40 64 95 10 40 10 20 new RAH844 new Item No: 1598 Darling Grip 95 x 35 64 95 35 18 15 35 RAH913 RAH912 RAH914 02 DECORATIVE HARDWARE 1.1 Aluminium & Stainless Steel Handles & Knobs Item No: 06 Alex T06 Handle 128 149 12 30 new new new 1 RAH673 RAH745 RAH794 Item No: 50 Arch Handle 96 192 236 10 28 10 116 10 28 Ø new RAH731 RAH733 Item No: 46 Oval Arch Handle 96 115 15 28 RAH735 RAH734 RAH670 128 153 15 28 160 190 15 28 192 229 15 28 RAH740 RAH739 RAH672 RAH643 RAH915 RAH916 15 Ø new new new new new new RAH736 MB W Item No: 592 12mm Steel Bar Handle 96 156 12 30 192 252 12 30 300 24 284 344 12 30 400 28 Ø new new RIH1015 RIH1011 RIH1013 RIH1014 RIH1010 RIH1012 Item No: 27 Ø new new new new KR Bar Knobs 12 18 RAK122 14 20 20 25 24 30 RAK125 RAK123 RAK124 RAK281 RAK284 RAK283 RAK285 03 1 DECORATIVE HARDWARE 1.1 Aluminium & Stainless Steel Handles & Knobs Item No: 495 Square D-Handle with Wide Pillar 128 158 9.5 32 new 192 222 9.5 32 320 350 9.5 32 448 478 9.5 32 RAH768 RAH769 RAH770 RAH771 Item No: 459 Square D-Handle 96 108 12 30 160 172 12 30 320 332 12 30 448 460 12 30 new new new RAH773 RAH776 RAH778 RAH779 RAH772 RAH775 RAH774 RAH777 Item No: 9 AlexT15 Grip 32 42 14 21 128 140 14 21 234 294 14 21 new RAH746 RAH747 RAH748 14 Item No: 578 Roman Bar Handle 128 150 39 192 214 39 256 278 39 RIH275 384 406 39 480 502 39 612 634 39 RIH985 762 784 39 RIH986 new RIH273 RIH274 RIH276 RIH277 04 DECORATIVE HARDWARE 1.1 Aluminium & Stainless Steel Handles & Knobs Item No: 1850 Tower Grip Handle 224 248 4 32 new new 4 1 RAH934 RAH935 7.8 Item No: 448 UFO Arch Handle 128 152 25 30 288 343 25 30 448 530 25 30 25 new new new new RAH783 RAH781 RAH785 RAH786 RAH782 RAH780 RAH784 Item No: 454 Half Round Arch 192 216 19 33 348 394 19 33 392 444 19 33 478 544 19 33 19 new new new new new RAH756 RAH757 RAH758 MB W RAH917 RAH918 RAH759 RAH760 RAH761 Item No: 54 14mm Arch Handle 195 244 14 35 234 294 14 35 314 394 14 35 519 659 14 35 Ø new Ø14 RAH741 RAH742 RAH743 RAH744 Item No: 455 Half Round Handle with Oval Pillars 96 156 19 32 19 new new RAH763 RAH762 05 1 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Bullet D Grip Left or Right Bullet D Centre Grip Item No: 1601 Item No: 1600 224 252 12 32 RAH921 woo woo d d 352 380 12 32 RAH922 RWH696 RWH697 352 380 12 32 RAH923 RWH698 RWH699 RWH694 RWH695 new Round Slot Grip Left or Right Round Slot Centre Grip Item No: 1603 Item No: 1602 224 252 12 32 RAH924 d woo woo d 352 380 12 32 RAH925 RWH702 RWH703 352 380 12 32 RAH926 RWH704 RWH705 RWH700 RWH701 new Item No: 1583 Postbox Handle 96 113 16 RIH1416 RIH1417 128 145 16 RIH1418 RIH1419 113/145 14 96/128 33 42 102/134 06 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1608 1 Oslo Knob 45 32 RAK290 RAK291 Ø woo woo d d RWK404 RWK405 Item No: 37 Ø new 16 AK12 Knob (Ø16mm) Finish 24 RS Code RAK128 Item No: 40 Ø new 24 AK16 Knob (Ø24mm) Finish 20 RS Code RAK135 Item No: 39 Ø new 30 AK15 Knob (Ø30mm) Finish 25 RS Code RAK129 Item No: 453 25mm Square Knob & Square Pillar Finish RS Code RAH792 new 25x25 31 Item No: 21 Ø new 30 new 30 AK11 Knob (Ø30mm) Finish 30 30 RS Code RAK126 RAK288 Item No: 452 Ø new 25 Round Knob & Round Pillar (Ø24mm) Finish RS Code RAH791 25 Item No: 463 Angle Grip 32 42 33 20 20 new Item No: 1569 Ceramic Knob RS Code Ø 27 32 new new RAH749 RAH750 RIH1414 07 1 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1609 Capped Tappered Knob Ø22mm 22 23 RAK292 RAK293 Ø woo woo d d RWK406 RWK407 new Item No: 1621 Capped Ridge Knob Ø26mm 26 28 RAK294 RAK295 RWK408 RWK409 Ø woo woo d d * Free assorted caps supplied with each knob. Wood Caps Black & White Metal Caps Maple, Oak, Cherry, Mahogany, Beech, Black, White, Tan, Enoco, Eggshell new Item No: 1623 Tulip Ridge Knob Ø64mm 32 64 32 RAK296 RAK297 RWK410 RWK411 Ø woo woo d d new Item No: 1624 Heart Knob 50 30 RSK488 RSK489 Ø Red White 50 30 08 46 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1605 1 Alex TO3 12mm 128 152 12 32 RAH930 RAH929 new Item No: 1606 Alex TO3 50mm 128 152 50 32 RAH931 new Item No: 1607 Alex TO1 12mm 128 152 12 32 RAH933 RAH932 new Item No: 1604 Mini Grips Flag 14 12 32 RAH927 16 24 12 32 RAH928 09 1 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1564 Circular Handle 160 170 25 RIH1406 320 330 25 RIH1407 new Item No: 1565 Square Handle 160 170 24 RIH1408 256 266 24 RIH1409 new Item No: 1566 Slotted Handle 192 205 28 RIH1410 320 335 34 RIH1411 new Item No: 1567 Leather Pull’s 128 155 25 Knob 65 25 RIH1412 Leather Coffee RIH1413 10 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1102 1 Cubic Handle 160 265 40 30 RIH1055 new Item No: 1101 Cubic Knob 32 40 40 30 32 60 60 30 RIH1053 RIH1054 new Item No: 1104 Concave Handle 160 200 40 30 RIH1052 new Item No: 1103 Concave Pull 32 40 40 30 32 60 60 30 RIH1050 RIH1051 new Item No: 1105 Dimple Pull 32 40 40 25 32 60 60 30 RIH1056 RIH1057 11 1 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs I new Item No: 1563 Flower Handle Left & Right 96 110 25 RIH1400 RIH1401 RIH1402 RIH1403 LEFT RIGHT LEFT RIGHT new Item No: 1568 Crystal Handle & Knob 128 140 25 RIH1405 Knob 16 25 RIH1404 new Item No: 1128 Crystal Prism Glass & Chrome Knob 30 40 RIK146 RIK150 new Item No: 1628 Crystal Piramyd Knob 35mm x 40mm 40 35 RIK149 Ø Crystal Black Ø Crystal new Item No: 1543 Round Glass Knob 44 x 34mm 34 44 RIK148 new Item No: 1543 Crystal Knob Flat 35mm x 40mm 40 35 RIK147 Ø Crystal Ø Crystal 12 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs 1 new Item No: 1760 Titania Crystal & Knob 128 160 30 RIH1507 Knob 50 22 RIH1508 new Item No: 1759 Calypso Crystal Knob 30 28 RIH1506 20 18 RIH1505 new Item No: 1761 Electra Crystal Knob 20 50 26 RIH1509 new Item No: 1771 Tappered Crystal Knob 22 30 RIK280 Ø new Item No: 1772 AK21 Crystal Knob 18 28 RIK281 new Item No: 1774 AK12 Crystal Knob 16 25 RIK282 Ø Ø new Item No: 1773 Square D Wide Pillar Crystal Handle 128 158 9.5 32 RIH1567 13 1 DECORATIVE HARDWARE 1.2 Contemporary Handles and Knobs new Item No: 1758 Slot Handle 128 135 18 28 RIH1501 RIH1502 192 168 18 28 RIH1503 RIH1504 new Item No: 1757 Dimple Knob 33 25 RIH1499 RIH1500 Ø new Item No: 1756 Aphrodita Crystal Handle & Knob 160 198 9 30 RIH1496 320 358 9 30 Knob 48 11 20 RIH1497 RIH1498 new Item No: 1754 Stellar Crystal Handle 128 140 12 26 RIH1491 RIH1492 192 202 12 26 RIH1493 new Item No: 1745 Square Crystal Knob Knob 30 x 30 30 RIH1495 Knob 44 x 44 30 RIH1494 14 DECORATIVE HARDWARE 1.2 Contemporary Handles & Knobs new Item No: 1626 1 Maniglia Handle 320 340 30 30 RIH1449 160 185 27 27 RIH1450 new Item No: 1627 Twisted Handle 320 352 32 25 RIH1451 160 194 28 25 RIH1452 new Item No: 1118 Oak Half Round Arch 128 165 20 30 192 233 20 35 RWH682 RWH683 woo d d woo RWH680 RWH681 15 1 DECORATIVE HARDWARE 1.3 Wooden Handles new Item No: 1119 12mm Square-D Wide Pillar 128 147 12 30 192 211 12 30 RWH686 RWH687 woo woo d d RWH684 RWH685 new Item No: 1120 20mm Square D-handle with Wide Pillar 128 147 20 30 192 211 20 30 RWH690 RWH691 woo woo d d RWH688 RWH689 new Item No: 1121 30mm Square-D Wide Pillar 192 211 30 30 woo d d woo RWH692 RWH693 16 DECORATIVE HARDWARE 1.4 Antique Handles and Knobs new Item No: 1765 1 Victoria Handle 96 110 16 22 RIH1522 RIH1523 RIH1524 new Item No: 1768 Regent Handle 76 104 22 22 RIH1534 RIH1533 new Item No: 1770 Bastion Handle 96 162 18 22 RIH1538 RIH1539 new Item No: 1766 Bastion Knob 32 25 RIK279 RIK278 new Item No: 1767 Paris Drop Handle 33 55 RIH1531 RIH1532 Ø Ø new Item No: 1769 Buttercup Handle 64 104 28 25 RIH1535 RIH1537 RIH1536 17 1 DECORATIVE HARDWARE 1.5 Aluminium Finger Grips new Finger Grips Flat - Small (Natural Anodised) Item No: 1132 RS Code RAH800 RAH801 RAH802 RAH803 RAH804 RAH805 RAH806 RAH807 RAH808 RAH809 RAH840 Item No: 1133 RS Code RAH810 RAH811 RAH812 RAH813 RAH814 RAH815 RAH816 RAH817 RAH818 RAH819 RAH841 Description Small Finger Grip Flat Size 147mm 297mm 310mm 371mm 397mm 447mm 497mm 597mm 747mm 897mm 3m lengths 3.2 6.4 10 11.5 19 30 new Finger Grips Flat - Large (Natural Anodised) Description Large Finger Grip Flat Size 147mm 297mm 310mm 371mm 397mm 447mm 497mm 597mm 747mm 897mm 3m lengths 10 6.4 3.2 3.2 6.4 10 21 new Finger Grips Curved - Small (Natural Anodised) Item No: 1134 RS Code RAH820 RAH821 RAH822 RAH823 RAH824 RAH825 RAH826 RAH827 RAH828 RAH829 RAH842 Description Small Finger Grip Curved Size 147mm 297mm 310mm 371mm 397mm 447mm 497mm 597mm 747mm 897mm 3m lengths 19 42.5 new Finger Grips Curved - Large (Natural Anodised) Item No: 1135 RS Code RAH830 RAH831 RAH832 RAH833 RAH834 RAH835 RAH836 RAH837 RAH838 RAH839 RAH843 Item No: 1827 Description Size 147mm 297mm 310mm 371mm 397mm 447mm 497mm 597mm 747mm 897mm 3m lengths 10 6.4 3.2 Large Finger Grip Curved 35 new Aluminium Handle Edge AE2519 Description Aluminium Finger Grip 19.5 Size 3m length RS Code RIH1807 18 DECORATIVE HARDWARE 1.5 Aluminium Finger Grips new Finger Grips 1 Flat - Large Grip 1 Item No: 1595 Description Finger Grip Flat Size 297mm 397mm 447mm 497mm 597mm 747mm 897mm RAH859 RAH862 RAH865 RAH868 RAH871 RAH874 RAH877 RAH860 RAH863 RAH866 RAH869 RAH872 RAH875 RAH878 RAH861 RAH864 RAH867 RAH870 RAH873 RAH876 RAH879 297/397/447/497/597/747/897 19.2 50 197/297/347/397/497/647/797 50 32 10 7.4 3.2 13 new Finger Grip 2 Angled Large Grip Item No: 1597 Description Finger Grip Size 297mm 397mm 447mm 497mm 597mm 747mm 897mm RAH898 RAH900 RAH902 RAH904 RAH906 RAH908 RAH910 RAH899 RAH901 RAH903 RAH905 RAH907 RAH909 RAH911 297/397/447/497/597/747/897 19.2 50 197/297/347/397/497/647/797 50 36.5 10 7.4 3.2 17.7 new Finger Grip 2 Angled Centre Rounded Item No: 1596 Description Finger Grip Size 297mm 397mm 447mm 497mm 597mm 747mm 897mm RAH883 RAH885 RAH887 RAH889 RAH891 RAH894 RAH896 RAH884 RAH886 RAH888 RAH890 RAH892 RAH895 RAH897 297/397/447/497/597/747/897 19.2 150 10 7.4 3.2 17.7 36.5 new Finger Grip 3 Flat Large Rounded Item No: 1594 Description Finger Grip Size 297mm 397mm 447mm 497mm 597mm 747mm 897mm RAH845 RAH847 RAH849 RAH851 RAH853 RAH855 RAH857 19.2 RAH846 RAH848 RAH850 RAH852 RAH854 RAH856 RAH858 297/397/447/497/597/747/897 36 10 7.4 13 35 3.2 Note: Subtract 2mm on your door or drawer height to accommodate the finger grip. Applicable to all four products on this page. 19 1 DECORATIVE HARDWARE 1.5 Aluminium Finger Grips new Aluminium Handle Edge - AH6001, 3m lengths Item No: 1828 RS Code RIH1805 Description Aluminium Handle Edge - AH 6001 49 new Aluminium Handle Edge - AH6002, 3m lengths Item No: 1829 RS Code RIH1806 Description Aluminium Handle Edge - AH 6002 66 new Stainless Steel Corner Bracket - CS-02 Item No: 1830 RS Code RIH1809 Description Stainless steel corner bracket - CS-02 new Small Flat Finger Grip, 3m lengths Item No: 1831 RS Code RAH840 Description Small Flat Finger Grip, 3m lengths 11.5 10 6.4 3.2 new Aluminium Finger Grip, 3m lengths Item No: 1034 RS Code RIH1808 Description Aluminium Finger Grip, 3m lengths door 19.5 10 cabinet bottom 3.2 6.4 Grip doors from behind to open door. Handleless doors. 20 DECORATIVE HARDWARE 1.5 Aluminium Finger Grips The Handle Profile 3PH can either be made to fit your door as a pocket handle or be used to fit the full width of your door. The profile can either be purchased in 4m lengths as well as the two various end caps, either for a pocket or a full width version. Pre-cut lengths are available in the following sizes: new Handle Profle 3PH Pocket 1 Item No: 1700 Size 186mm 286mm 336mm 386mm 486mm 636mm 786mm For Door Width 296 396 446 496 596 746 896 RS Code RIH1810 RIH1811 RIH1812 RIH1813 RIH1814 RIH1815 RIH1816 RS Code RIH1791 RIH1792 RIH1793 RIH1794 RIH1795 RIH1796 RIH1797 Description Handle Profile 3PH Pocket Version Can be cut to any sizes which then is fitted on top of the door or drawer. End caps for pocket are then screwed onto the sides of the handle. Calculation for cutting 3VPH handle, width of your door minus 110mm. Calculation material subtract 10mm for the ends caps. eg. door width 296mm, 296-110mm = 186mm, actual material length 186mm - 10mm = 176mm step1 - EA4 sides of door step2 - router out pocket step3 - make a 3.5mm groove new Handle Profle 3PH Full Length Item No: 1701 For Door Width 296 396 446 496 596 746 896 Item No: 1560 RS Code RIH1817 RIH1818 RIH1819 RIH1820 RIH1821 RIH1822 RIH1823 RS Code RIH1798 RIH1799 RIH1800 RIH1801 RIH1802 RIH1803 RIH1804 Description Handle Profile 3PH Size 296mm 396mm 446mm 496mm 596mm 746mm 896mm step - create 12mm depth groove new Handle Profle 3PH Description Handle Profile 3PH 19 Size 4m 4m Finish RS Code RIH1397 RIH1622 Full Width Version Can be cut to any sizes which the full width end caps are then fixed with a super strong, fast curing glue (superglue ) only a small drip at the tongue of the end cap. The door or drawer must be grooved 3.5mm by 12mm deep. Cold glue can be used in the groove and left to set. Calculation for cutting 3VPH handle, finished size minus 14mm for the end caps. eg. door width 296mm, actual material length 296mm - 14mm = 282mm 45 new End Cap 3PH Full Width Item No: 1562 Finish RS Code RIH1399 RIH1624 Description 10 8 3.2 new End Cap 3PH Pocket End Cap Full Width End Cap Full Width Item No: 1561 Finish RS Code RIH1398 RIH1623 Super Glue Description Super Glue Item No: 1035 Size 3g RS Code RKW358 Description End Cap Pocket Version End Cap Pocket Version 21 2 TABLE LEGS 2.1 Kitchen Table Legs Ø80 x 1100 Brushed Satin Nickel Ø60 x 700 Brushed Satin Nickel Ø80 x 870 Brushed Satin Nickel Ø80 x 870 Stainless Steel Ø60 x 700 Natural Anodised Ø60 x 700 Natural Anodised Square leg 700 x 60 x 60 Description 700 x 60 x 60mm Leg BSN Size RS Code Item No: R new Round Legs 1100/870/700 Description 700 x 60 Leg BSN 870 x 60 Leg BSN 700 X 80 Leg BSN 870 x 80 Leg BSN 1100 x 80 Leg BSN new *Square legs 700/870 x 80 x 80 Size 700 x Ø60mm 870 x Ø60mm 700 x Ø80mm 870 x Ø80mm 1100 x Ø80mm RS Code RKL307 RKL310 RKL308 RKL309 RKL311 Item No: 103 104 106 107 108 700 x 60 x 60mm RKL290 103 140mm 140mm *Legs are available standard with a centre fixed base plates. Side fixing base plates are available which have to be orderd seperately. Universal base plates for side and centre fixing available soon. 140mm Description Size RS Code RKL295 Item No: 1523 new Counter Leg 700 x 80 x 80 Leg Stainless Steel Hairline 700 x 80 x 80mm Size RS Code Item No: Description Counter Leg NA Counter Leg Stainless Steel Hairline 220mm 105mm 60 x 60 x 870mm RKL304 1532 60 x 60 x 870mm RKL305 1532 700 x 80 x 80 Leg Aluminium 700 x 80 x 80mm RKL294 1523 870 x 80 x 80 Leg Stainless Steel Hairline 870 x 80 x 80mm RKL297 1523 870 x 80 x 80 Leg Aluminium 870 x 80 x 80mm RKL296 1523 Side Fixing Base Plate for 80 Leg 140 x 140 x 5mm RKL364 1524 *All legs supplied with centre fixing base plates, side fixing base plates are available new * Square legs 700/870 x 60 x 60 Description Size RS Code Item No: 700 x 60 x 60 Leg Stainless Steel Hairline 700 x 60 x 60mm RKL299 1525 700 x 60 x 60 Leg Aluminium 700 x 60 x 60mm RKL298 1525 870 x 60 x 60 Leg Stainless Steel Hairline 870 x 60 x 60mm RKL301 1525 870 x 60 x 60 Leg Aluminium 870 x 60 x 60mm RKL300 1525 Side Fixing Base Plate for 60 Leg 105 x 105 x 5mm RKL365 1531 *All legs supplied with centre fixing base plates, side fixing base plates are available new *Leg Round Edges 700 x 60 x 60 870mm Description 60 x 60mm 60 / 80 Size RS Code Item No: 700 x 60 x 60 Leg Stainless Steel Hairline 700 x 60 x 60mm RKL303 1526 700 x 60 x 60 Leg Aluminium 700 x 60 x 60mm RKL302 1526 Side Fixing Base Plate Round Edges Leg 105 x 105 x 5mm RKL363 1533 *All legs supplied with centre fixing base plates, side fixing base plates are available 22 TABLE LEGS 2.2 Office Table Legs 2 700 x Ø80 Charcoal 700 x Ø60 Silver 700 x 60 Charcoal 700 x Ø50 Tapered Brushed Nickel 700 x Ø50 Angled Tapered Charcoal new Office Legs 140 Description 700 x Ø80 Leg 700 x Ø60 Round Leg 700 x 60 Square Leg 700 x Ø50 Tappered Leg 700 x Ø50 Angled Leg Size 700 x Ø80 700 x Ø60 700 x 60 x 60 700 x Ø50 700 x Ø50 BN RKL314 RKL388 RKL338 RKL317 RKL341 Silver RKL312 RKL389 RKL337 RKL315 Charcoal RKL313 RKL390 RKL336 RKL316 Item No. 1527 103 1585 1529 1586 3 96 96 Top Plate 140 RKL340 RKL339 new Ø60 Round & 60 Square Couch Feet & Coffee Table Legs Description Couch Feet Ø60 Coffee Table Leg Ø60 Couch Feet 60 mm Coffee Table Leg 60 mm Size 150 x Ø60 BN RKL381 Silver Charcoal Item No. 1613 1614 1611 1612 90 90 90 RKL382 RKL383 RKL385 RKL386 RKL376 RKL377 RKL379 RKL380 380 x Ø60 RKL384 150 x 60 x 60 RKL375 380 x 60 x 60 RKL378 90 Ø60 Top Plate 60 x 60 Top Plate 150 150 380 Ø60 60 380 Ø60 60 23 2 TABLE LEGS 2.3 Aluminium Legs 48 Square Leg Couch Feet Description 65.5 Square Leg Concealed Base Square Leg Concealed Base Square Leg Concealed Base Square Leg Small Base Square Leg Small Base Size Square Leg Small Base Square Leg Large Base Square Leg Large Base Square Leg Large Base Concealed Small Large 40 Item No: 476/477/478 Size 75mm 105mm 145mm 85mm 115mm 155mm 85mm 115mm 155mm RS Code RKL154 RKL152 RKL159 RKL153 RKL160 RKL158 RKL166 RKL165 RKL164 48 Round Leg Couch Feet Description Round Leg Concealed Base Round Leg Concealed Base Round Leg Concealed Base Round Leg Small Base Round Leg Small Base Round Leg Small Base Round Leg Large Base Round Leg Large Base Round Leg Large Base Item No: 473/474/475 Size 75mm 105mm 145mm 85mm 115mm 155mm 85mm 115mm 155mm RS Code RKL163 RKL161 RKL162 RKL157 RKL156 RKL155 RKL169 RKL168 RKL167 Concealed Small Large Size 65.5 Ø40 48 new Square Leg Couch Feet Item No: 476/477/478 Size 75mm 105mm 145mm 85mm 115mm 155mm 85mm 115mm 155mm RS Code RKL321 RKL322 RKL323 RKL335 RKL326 RKL327 RKL324 RKL334 RKL325 65.5 Description Square Leg Concealed Base Square Leg Concealed Base Square Leg Concealed Base Square Leg Small Base Square Leg Small Base Square Leg Small Base Square Leg Large Base Square Leg Large Base Square Leg Large Base Concealed Small Large 40 48 Size new Round Leg Couch Feet Item No: 473/474/475 Size 75mm 105mm 145mm 85mm 115mm 155mm 85mm 115mm 155mm RS Code RKL318 RKL328 RKL319 RKL320 RKL332 RKL333 RKL329 RKL330 RKL331 65.5 Description Round Leg Concealed Base Round Leg Concealed Base Round Leg Concealed Base Round Leg Small Base Round Leg Small Base Round Leg Small Base Round Leg Large Base Round Leg Large Base Round Leg Large Base Size Concealed Small Large Ø40 24 TABLE LEGS 2.4 Universal Consoles and Couch Feet Selecting the various console components, which are sold separately, various combinations are possible to create various applications. NB! All components are sold separately - you choose and create! Aluminium available in Natural Anodised and Brushed Nickel. 2 new 40 x 40mm Square Aluminium Console Item No: 1784 Size RS Code RS Code RKL394 RKL396 RKL398 RKL400 RKL395 RKL397 RKL399 RKL401 40 Ø40 new Ø40mm Round Aluminium Console Item No: 1786 Size RS Code RS Code RKL411 RKL413 RKL415 RKL417 Description Description Ø40mm Round Aluminium Console Ø40mm Round Aluminium Console Ø40mm Round Aluminium Console Ø40mm Round Aluminium Console 40 x 40mm Square Aluminium Console 150mm 40 x 40mm Square Aluminium Console 100mm 40 x 40mm Square Aluminium Console 80mm 40 x 40mm Square Aluminium Console 35mm 150mm RKL410 100mm RKL412 80mm 35mm RKL414 RKL416 150/100/80/35 new 40 x 12mm Square End Cap Item No: 1792 RS Code RS Code RKL432 RKL433 40 Ø40 new Ø40 x 12mm Round End Cap Item No: 1788 RS Code RS Code RKL426 RKL427 Description 40 x 12mm Square End Cap Description Ø40 x 12mm Round End Cap new 40 x 12mm Square Fusing Disc Item No: 1793 12 12 new Ø40 x 12mm Round Fusing Disc Item No: 1789 Description RS Code RS Code RKL433 Description RS Code RS Code 40 x 12mm Square Fusing Disc RKL434 Ø40 x 12mm Round Fusing Disc RKL428 RKL427 Brushed Nickel End Cap also used as a Fusing Disc. new Ø24.5mm Round Aluminium Console Item No: 1787 Brushed Nickel End Cap also used as a Fusing Disc. new 25 x 25mm Square Aluminium Console Item No: 1785 Size 135mm 95mm 60mm 25mm RS Code RS Code 25 Ø24.5 Description 25 x 25mm Square Aluminium Console 25 x 25mm Square Aluminium Console 25 x 25mm Square Aluminium Console 25 x 25mm Square Aluminium Console Description Ø24.5mm Round Aluminium Console Ø24.5mm Round Aluminium Console Ø24.5mm Round Aluminium Console Ø24.5mm Round Aluminium Console Size 135mm 95mm 60mm 25mm RS Code RS Code RKL418 RKL420 RKL422 RKL424 RKL419 RKL421 RKL423 RKL425 RKL402 RKL404 RKL406 RKL408 RKL403 RKL405 RKL407 RKL409 135/95/60/25 25 2 TABLE LEGS 2.4 Universal Consoles and Couch Feet new 25 x 12mm Square End Cap Item No: 1794 RS Code RS Code RKL435 RKL436 new Ø24.5 x 12mm Round End Cap Item No: 1790 Description 25 x 12mm Square End Cap Description RS Code RS Code 25 Ø24.5 Ø24.5 x 12mm Round End Cap RKL429 RKL430 12 12 new 25x 12mm Square Fusing Disc Item No: 1795 new Ø40 x 12mm Round Fusing Disc Item No: 1791 RS Code RS Code Description RS Code RS Code RKL436 Description 25 x 12mm Square Fusing Disc RKL437 Ø24.5 x 12mm Round Fusing Disc RKL431 RKL430 Brushed Nickel End Cap also used as a Fusing Disc. Brushed Nickel End Cap also used as a Fusing Disc. new Ø40 x 20mm Round Base Foot Item No: 1798 new Rubber Cushion Disc for Glass Item No: 1797 RS Code RKL438 RKL439 Description RS Code RS Code Ø40 Description Ø39.5 x 1mm Rubber Cushion Disc for Glass Ø24 x 1mm Rubber Cushion Disc for Glass Ø39.5 20 Ø40 x 20mm Round Base Foot RKL440 RKL441 new M10 Bolts Item No: 1835 RS Code RKL445 RKL446 RKL447 Ø24 new M10 Ready Bolts Item No: 1836 RS Code RKL443 RKL444 Description M10 x 45 Bolt & washer for 32mm tops M10 x 35 Bolt & washer for 16-22mm tops M10 x 15 Bolt for fastening the top plate Description M10 x 35 Ready Bolt for end caps & base foot M10 x 20 Ready Bolt for fusing discs 45 35 15 new Round Fusing Discs for Legs 35 20 Item No: 1837 Size RS Code RS Code Description new 65 x 65 Top Plate Item No: 1799 Size 65 x 65 RS Code RKL442 Round fusing disc for Ø60mm legs Ø62 x 12 RKL448 RKL449 Round fusing disc for Ø80mm legs Ø82 x 12 RKL450 RKL451 Description 65 x 65mm Top Plate Ø62/Ø82 65 26 8 12 2 TABLE LEGS 2.4 Universal Consoles and Couch Feet Selecting the various console components, which are sold separately, various combinations are possible to create various applications. Aluminium available in Natural Anodised and Brushed Nickel. NB! All components are sold separately - you choose and create! 2 End Cap square or round. M10x30 Ready Bolt for glass or minimum 8mm in thickness. Glass Rubber used between the glass and aluminium end cap and console. Aluminium consols available in two sizes and four height sizes. Glass Fusing Disc square or round. M10x20 Ready Bolt used to fasten the fusing disc to the aluminium console. Aluminium consoles available in two sizes and four height sizes. Glass 40x40 Ø40 25x25 Ø24.5 40x40 Ø40 25x25 Ø24.5 M10x45 Bolt to fasten the console to a maximum 38mm top or a M10x35 bolt can be used if a minimum 16 top is used. M10x45 Bolt to fasten the console to a maximum 38mm top or a M10x35 bolt can be used if a minimum 16 top is used. Application 1 A Ø10.5mm hole is drilled through the glass, which is then fastened to the console using a round or square end cap. Application 2 A fusing disc is fused to the glass. Wood Cabinet 65 x 65 top plate M10x15 Bolt used to fasten the top to the console. Aluminium consoles available in two sizes and four height sizes. 65 x 65 top plate M10x15 Bolt used to fasten the top plate to the console/leg. Aluminium console/leg available in one size and four height sizes. 40x40 Ø40 25x25 Ø24.5 Ø40 M10x20 Ready Bolt used to fasten the base foot to the aluminium console/leg. M10x45 Bolt to fasten the console to maximum 38mm top or a M10x35 bolt can be used if a minimum 16 top is used. Application 3 The console is fitted to a wooden top. Application 4 The console is fitted as a leg underneath a cabinet. Square leg application refer to page 24 Glass Glass Ø62mm Fusing disc for a Ø60mm leg Ø82mm Fusing disc for a Ø80mm leg Application 5 Fusing a Ø60mm leg on a glass top using a Ø62mm fusing disc. Application 6 Fusing a Ø80mm leg on a glass top using a Ø82mm fusing disc. 27 2 TABLE LEGS 2.5 Cabinet and Couch Feet 45 Square Leg Description new Square Leg 80 x 40 x 40mm, Satin Nickel new Square Leg 150 x 40 x 40mm, Satin Nickel 45 Item No: 1094 Size 80mm 150mm RS Code RKL291 RKL292 80 / 150 60 new Dune Item No: 1580 Size 140mm 20 95 Description Dune Aluminium Polished RS Code RKL369 80 50 35 135 new Nave 140 Item No: 1579 Size 100mm RS Code RKL368 Description 235 120 Nave Aluminium Polished 45 M10 100 new Vuzero Item No: 1575 Size 40mm 225 Description Vuzero Aluminium Polished RS Code RKL372 Ø10 Ø10 Ø40 28 TABLE LEGS 2.5 Cabinet and Couch Feet new Angelo 2 Item No: 1578 Size 170mm RS Code RKL371 105 105 Description Angelo Aluminium Polished 170 new Sesto Item No: 1581 Size 130mm RS Code RKL367 105 105 Description Sesto Chrome 130 170 new Spigolo Item No: 1577 Size 130mm RS Code RKL370 20 90 60 Description Spigolo Aluminium Polished 105 130 35 29 2 TABLE LEGS 2.6 Aluminium Frame Components A wide variety of applications which include: Aluminium Framed Island Units, Aluminium Framed Tables, Aluminium Framed Trolley’s, Easy Drilling Jigs available for easy drilling and assembling, DIY Ready. new Aluminium Frame 38mm & 40mm Item No: 1306 Size 38 x 38mm 38 x 38mm 40 x 40mm 40 x 40mm RS Code RIH1252 RIH1254 RIH1253 RIH1255 new Corner Fitting - Screws included Item No: 1658 RS Code RIH1526 Description Aluminium Frame 6252B (3m Lengths) Aluminium Frame 6252B (3m Lengths) Aluminium Frame 6252C (3m Lengths) Aluminium Frame 6252C (3m Lengths) Description Corner Fitting Silver - set of four 38mm 6252B 40mm 6252C new Wheel Fitting Grey Item No: 1659 RS Code RIH1527 Description Wheel Fitting, M10 Grey - set of four 38mm 40mm new Eva Castor Dark Grey Item No: 1522 Size 75mm RS Code RIH1321 Description Eva Dark Grey ABS Core, Light Grey PU Thread with brake new Corner End Cap Item No: 1660 RS Code RIH1528 Description Corner End Cap - set of four 42 M10 15 100 new Table Top Fastening Bracket Item No: 1635 RS Code RIH1529 Description Table Top Fastening Bracket - set of four Ø75 Island Units Application Example 30 TABLE LEGS 2.6 Aluminium Frame Components new Drilling Jigs 2 Item No:1664 RS Code RIH1562 RIH1563 RIH1564 Description Drilling Jig A Drilling Jig B Drilling Jig C A B C Trolleys Tables C B B A B A B B 24.5 5 18 10 20 C A 10 18 5 18 10 20 10 B 24.5 24.5 B 10 20 C 31 3 DOORS 3.1 Aluminium Sliding Door System The first DIY solution for the South African market. • Save bedroom space • DIY solution • Ideal for bedrooms or room dividers • Modernise your home • Easy to assemble and fit • Fits wood, glass or mirror finishes • Designed for standard SA board sizes • Accepts 16mm board or 5mm glass & mirror Available kits: 1 Single Door Kit 2 x 2700 door profiles 1 x 2m top & bottom profile 2 2m Top & Bottom Track Kit 1 x 2m top track 1 x 2m bottom track 3 3m Top & Bottom Track Kit 1 x 3m top track 1 x 3m bottom track 4 Top & Bottom Wheel Set 2 bottom wheels, 2 top wheels 1 allen key, 1 stopper, 12 screws 5 H-Profile 1 x 1m H profile kit 2 x 20mm screws. 2 screw caps 6 Glass Gasket 4 x 2700 length glass gasket (for glass panels) 1 x 1m neopreen foam strip 7 Dust Sealing Brush 1 Roll 10m (optional goes on one side of the door frame) 8 Double Sided Tape 1 roll 25m (if the bottom rail is fitted to a non-porous surface) new Jack Doors Item No: 1534 Kit RS Code RAD001 RAD002 RAD003 RAD004 RAD005 RAD006 RAD007 RAD008 RAD009 RAD010 RAD011 RAD012 RAD013 RAD014 RAD015 RAD016 RAD017 RAD018 RAD019 RAD020 RAD021 RAD022 RAD023 RAD024 RAD025 RAD026 RAD027 RAD028 RAD089 RAD090 RAD091 Description Door set single White Door set single Black Door set single Maple Door set single Cherry Door Profile Top Profile e Top Track Door set single Wenge Door set single NA Top & bottom track set 2m Wenge Top & bottom track set 2m NA Top & bottom track set 2m White Top & bottom track set 2m Black Top & bottom track set 2m Maple Top & bottom track set 2m Cherry Top & bottom track set 3m White Top Wheel H Profile Bottom Track Top & bottom track set 3m Black Top & bottom track set 3m Maple Top & bottom track set 3m Cherry Top & bottom track set 3m Wenge Top & bottom track set 3m NA Sliding door Wheel Kit H-Profile 1m White H-Profile 1m Black H-Profile 1m Maple H-Profile 1m Cherry H-Profile 1m Wenge H-Profile 1m NA Glass gasket set Sealing dust brush set Double sided tape Bottom Wheel et t Glass Gasket Sealing Dust Brush 1 roll 10m Grip Handle Other Handle Option Finger Pull Flat RAH470 Alext16 RAH703 Grip handle 70mm Black Grip handle 70mm NA Grip handle 70mm White * All profiles are available in bulk on request 32 DOORS 3.1 Aluminium Sliding Door System STEP ONE: TECHNICAL OVERVIEW Understanding the Jack Sliding Door System 3 STEP TWO: ONE SLIDING DOOR CONSISTS OF THE FOLLOWING: 1 4 5 6 7 Single Door Kit Wheel Set Kit H-Profile Kit if there are more than one panel Glass Gasket if glass panels are used Brush (optional on one side of the door) THREE EQUAL DOORS Size per door = (open width - 34mm) ÷ 3 + 34mm 2 2 1 3 OW OH OW - Opening Width OH - Opening Height TWO EQUAL DOOR SEQUENCE Size per door = (open width - 34mm) ÷ 2 + 34mm 1 Firstly, measure the opening height and width where you would want to use the Jack Sliding Door System. The opening width will determine the length of the top & bottom track you require. Either a kit 2 which consists out of a 2m top & bottom track or a kit 3, a 3m top & bottom track. The maximum height of the opening must not be greater than 2730mm. When you have calculated and decided what door sequence you will use in each track, note that your maximum door width must not exceed 1068mm. Refer to door sequence formula table. When installing the Jack Sliding Door System in front of a cupboard, leave 110mm clear space in front, 82mm for the doors and an extra 28mm to avoid injury with your fingers when handling the doors. Minimum sets needed for two doors: X2 1 Single Door kit & X2 4 Wheel Set kit Minimum sets needed for three doors: X3 1 Single Door kit & X3 4 Wheel Set kit FOUR EQUAL DOORS FIVE EQUAL DOORS Size per door = ( open width -34mm) ÷ 4 + 34mm Size per door = (open width – 34mm) ÷ 5 + 34 2 1 3 4 1 2 3 4 5 Minimum sets needed for four doors: X4 1 Single Door kit & X4 4 Wheel Set kit Minimum sets needed for five doors: X5 1 Single Door kit & X5 4 Wheel Set kit STEP THREE: Decide on the style of door by choosing one of the many sequences to suite your specifications and style. DOOR WIDTH CALCULATION: If the dust sealing brush is applied to the side profiles subtract 6mm from the open width. Decide how many panels each door will have, and if glass or board panels are used. This system accepts 16mm board or 5mm glass. Only toughened glass must be used. When a mirror is used make sure a safety film is applied to the back of the mirror. GENERAL: The door height is always the same which is the opening height minus 33mm. Panel width is always the same which is the doors width minus 48mm. BOARD/GLASS PANEL HEIGHT CALCULATIONS: ONE PANEL TWO EQUAL PANELS min. 110mm FIG 1 Panel height = door height - 6mm 26mm Panel height = (door height ÷ 2) - 6mm 28mm visible area 26mm visible area 26mm visible area 26mm THREE EQUAL PANELS door height UNEQUAL PANELS shelves Finishes available: WHITE BLACK SILVER MATT ANODISED • Matches PG Bison Melawood range STD MAPLE • WINSOR CHERRY • AFRICAN WENGE • Outer panel height = (door height - 104 ÷ 3) +33 inner panel height (door height - 104 ÷ 3) +20 Outer panel height = (door height - 104 ÷ 3) +33 inner panel height (door height - 104 ÷ 3) +20 Component formula’s Top and bottom track Vertical Profile (Door height) Open width - 1mm Open height - 33mm Top and bottom U-channel H-profile Door width - 68mm Door width - 68mm 33 3 DOORS 3.2 Aluminium Glass Door Profiles P4, P6 & P7 All doors can be made to order in the 2 profiles and glass finishes depending on the specified requirements. Clear Glass, Frosted Glass, Clear Glass Frosted Film, Ocean View. Please note a technical information form will need to be filled out and the lead time from date of order will be approximately 2-3 weeks. We advise when placing the order that all lower level doors and handles or knobs which are fitted directly to the glass be ordered with toughened glass to prevent any injury. All profiles can be purchased in lengths and the components separately for DIY, however the glass will not be supplied. Please note no hinges are supplied nor is any drilling for the hinges. Standard concealed hinges are used. Please refer to Section 10. P4 Profile Description P4 Profile 3m Length 3m Length 3m Length new new Item No: 530 RS Code RIH784 RIH1249 RIH1250 Using Glass Gasket 22 P6 Profile Description new Item No: 1272 RS Code RIH785 P7 Profile Description 3m Length new new 3M VHB Tape 25m roll Item No: 1305 RS Code RIH1251 RIH1565 P6 Profile 3m Length Using Glass Gasket 22 22 44 44 44 Max. 5mm Max. 5mm C5 Gasket Using Glass/Wood Gasket C5 Gasket Using Glass/Wood Gasket 22 Glass 4mm SPAR C5 3M tape Bevel 1x1 44 Max. 7mm 3M tape P4 Profile P6 Profile Max. 7mm P7 Profile Gaskets Description S8 Dust Gasket for Wood/Glass up to 7mm - 3m Length S8-1 Dust Gasket for Glass up to 5mm - 3m Length Item No: 518/520 RS Code RIH781 RIH782 For Wood/Glass up to 7mm For Glass up to 5mm C5 Corner Bracket Description C5 Corner Bracket (Set of 4 with screws) Item No: 517 RS Code RIH780 Drilling detail for corner fitting 1 21.5 68° ø8 21.5 ø4 Steps to follow when ordering complete made doors: 1. 2. 3. 4. Choose glass type. Indicate if you require the glass to be toughened. Choose Aluminium Profile P4, P6 or P7. Indicate : - size of door - handle positioning on glass or door frame - hinges are not supplied nor is any drilling Ordering forms are available at any one of our many branches or can be downloaded from our website: www.raiel.com. 34 SIBU DESIGN 4.1 Decorative Structure Sheets 4 new LL Leguan Nero N/A Item No: 1273 Size 2600 x 1000 x 1.6 RS Code RIS220 Description LL Leguan Nero N/A new SL Dakota Metal N/A Item No: 1273 Size 2612 x 1000 x 2 RS Code RIS221 Description SL Dakota Metal N/A new SL Lava Copper N/A Item No: 1273 Size 2612 x 1000 x 1.7 RS Code RIS222 Description SL Lava Copper N/A new SL Dakota Copper N/A Item No: 1273 Size 2612 x 1000 x 2 RS Code RIS223 Description SL Dakota Copper N/A new SL Urban Titan N/A Item No: 1273 Size 2612 x 1000 x 2.2 RS Code RIS224 Description SL Urban Titan N/A S/A = Self Adhesive N/A = Non Adhesive 35 5 CABINET ORGANISERS & ACCESSORIES 5.1 Cabinet Organisers Ring Wine Racks Description Ø95mm 645/960mm new 6 Ring Wine Rack new 9 Ring Wine Rack Item No: 1117 Size 660 x 195 x 110mm 960 x 195 x 110mm RS Code RKW432 RKW450 Glass Rack Description new Glass Rack (1 Column) new Glass Rack (2 Column) Item No: 885 Size 340 x 115 x 63mm 340 x 215 x 63mm 340 x 435 x 63mm RS Code RKW407 RKW408 RKW311 Ø6mm 19 0m m Glass Rack (4 Column) Min. Int. Width 168mm Min. Int. Depth 520mm Min. Int.Height 560mm 3 Layer Spice Pull-out 200mm SIDE 525 Item No: 1521 Size 200mm RS Code RKW102 DOOR 525 Description new 200mm Spice Pull-Out A6 128 160 100 40 BT A5 25 25 25 A5 = 45mm + Door overhang to side A6 = 40mm + Door overhang to bottom Wicker Baskets Description Oak Multi Colour Burgundy Maple Dark Burgundy Item No: 964 Size 450mm 450mm 450mm 450mm 500mm 500mm 500mm 500mm RS Code RKW470 RKW471 RKW472 RKW473 RKW474 RKW475 RKW476 RKW477 Min. Int. Width 418mm for 450 Min. Int. Width 468mm for 500 Min. Int. Depth cabinet 510mm new Wicker Basket Oak new Wicker Basket Maple new Wicker Basket Multi Colour Burgundy new Wicker Basket Dark Burgundy new Wicker Basket Oak new Wicker Basket Maple new Wicker Basket Multi Colour Burgundy new Wicker Basket Dark Burgundy Veggie Basket Description Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Basket White / Height 200mm Veggie Basket Silver / Height 200mm Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Basket White / Height 200mm Veggie Basket Silver / Height 200mm Veggie Basket White / Height 110mm Veggie Basket Silver / Height 110mm Veggie Spacer White Item No: 112 Size 300mm 300mm 400mm 400mm 450mm 450mm 450mm 450mm 500mm 500mm 500mm 500mm 600mm 600mm 25mm RS Code excl. runners RKW321 RKW322 RKW123 RKW124 RKW125 RKW126 RKW324 RKW127 RKW128 RKW129 RKW130 RKW131 RKW132 RKW323 RKW133 RS Code incl. runners RKW501 RKW502 RKW489 RKW490 RKW491 RKW492 RKW494 RKW493 RKW495 RKW496 RKW497 RKW498 RKW499 RKW500 Veggie baskets now sold with or without Clover runners. Spacers are sold seperately. 36 CABINET ORGANISERS & ACCESSORIES 5.1 Cabinet Organisers Non Slip Mat Description Non-Slip Mat Light Grey 600mm x 1m x 1.5mm Non-Slip Mat Light Grey 600mm x 20m x 1.5mm Non-Slip Mat Light Grey 480mm x 1m x 1.5mm Non-Slip Mat Light Grey 480mm x 20m x1.5mm new Non-Slip Mat White 480mm x 1m x1.5mm new Non-Slip Mat White 480mm x 20m x1.5mm new Non-Slip Mat Black 480mm x 1m x1.5mm new Non-Slip Mat Black 480mm x 20m x1.5mm 5 Item No: 917 RS Code RIH671 RIH674 RKW309 RKW310 RKW453 RKW449 RKW464 RKW463 BLACK WHITE Broom Holder Description new Broom Holder Item No: 1446 RS Code RIH1296 Iron Holder Description Iron Holder GREY Item No: 1125 RS Code RIH1114 Open Rail Holder 15mm Description Item No: 782 Size RS Code PCR150 new Open Rail Holder 15mm - Silver Plastic 15 x 52mm Vacuum Fitting Holder Description Vacuum Fitting Holder Tie Rail 305mm Description new Tie Rail 305mm Nickel Plated Item No: 1126 RS Code RIH1115 Item No: 1419 Size 305mm RS Code RIH1295 37 5 CABINET ORGANISERS & ACCESSORIES 5.2 Wire Organisers new Spice Pull-out 150mm, Soft Close Item No: 1810 Size 150mm RS Code RKW479 Description 150mm Alu basket spice pull-out 150 385 min 500 100 Load capacity 25kg Load capacity 25kg new Tray Basket 3 Layer Item No: 1811 Size 200mm 300mm 200mm 300mm RS Code RKW480 RKW481 RKW482 RKW456 Description Tray Basket 3 layer with metal base Tray Basket 3 layer with metal base Tray Basket 3 layer with wooden base Tray Basket 3 layer with wooden base 200/300 Metal Base Wooden Base 160/260 38 385 min 500 CABINET ORGANISERS & ACCESSORIES 5.2 Wire Organisers new Lazy Susan Unit 5 Item No: 1812 Size 900mm 900mm RS Code RKW483 RKW458 Description 270° Lazy Susan with metal basket 270° Lazy Susan with wooden base Minimum Internal Cabinet Width 860mm 400 Bottom Minimum Internal Cabinet Width 860mm 400 Metal Basket Load capacity 10kg per basket Wooden Base new Magic Corner Item No: 1813 Size RS Code Description Magic Corner Universal with metal basket Magic Corner Universal with wooden base 660x515x600mm RKW484 660x515x600mm RKW461 Minimum Internal Width 700mm Minimum Internal Depth 550mm Minimum door opening 450mm Load capacity 6kg per basket Wooden Base Metal Basket 39 5 CABINET ORGANISERS & ACCESSORIES 5.2 Wire Organisers new 110° Tandem Pantry Unit Item No: 1814 Size RS Code Description 110° Tandem Unit with metal basket 110° Tandem Unit with wooden basket Height 1959 - 2359mm 450/500mm RKW485 450/500mm RKW457 450/500 385 min 550 Metal Basket Load capacity 5kg big basket and 2kg small basket Wooden Base 40 CABINET ORGANISERS & ACCESSORIES 5.2 Wire Organisers new High Pantry Pull-Out with Soft Closing 5 Item No: 1815 Size 300mm 400mm 300mm 400mm RS Code RKW455 RKW486 RKW487 RKW454 Description High Pantry Pull-Out with metal basket, 6 layer High Pantry Pull-Out with metal basket, 6 layer High Pantry Pull-Out with wooden basket, 6 layer High Pantry Pull-Out with wooden basket, 6 layer Height 1959 - 2359mm 300/400 250/350 Wooden trays Metal trays 460 min 550 min 550 Load capacity 10kg per basket 41 5 CABINET ORGANISERS & ACCESSORIES 5.2 Wire Organisers new Revolving High Pantry Pull-Out with Soft Closing Item No: 1816 Size 400mm 400mm RS Code RKW488 RKW459 Description High Pantry pull-out with metal basket, 6 layer High Pantry pull-out with wooden basket,6 layer Height 1959 - 2359mm 400 350 Wooden trays 538 min 550 min 550 Metal baskets min 375 Load capacity 10kg per basket 42 CABINET ORGANISERS & ACCESSORIES 5.3 Drawer Organisers - Adjustable Cutlery Trays 5 Movable (adjustable) dividers Cutlery Tray Description Cutlery Tray Grey Cutlery Tray White 900mm (see max & min) Cutlery Tray Grey Cutlery Tray White Cutlery Tray Grey Cutlery Tray White Cutlery Tray Grey Cutlery Tray White Cutlery Tray DIVIDER Grey Cutlery Tray DIVIDER White Cutlery Tray DIVIDER Grey Cutlery Tray DIVIDER White 600mm (see max & min) Item No: 669 Width 900mm 900mm 600mm 600mm 500mm 500mm 450mm 450mm 142mm 142mm 95mm 95mm Depth - all 480mm RS Code RIH1090 RIH1094 RIH1089 RIH1093 RIH1088 RIH1092 RIH1087 RIH1091 RIH1096 RIH1098 RIH1095 RIH1097 Tray Maximum & Minimum cutting sizes for custom fitting Drawer Width 900mm 900mm 900mm 900mm 500mm (see max & min) Cutlery Tray DIVIDERS Maximum Size (dxy) 480 x 830mm 480 x 530mm 480 x 430mm 480 x 380mm Minimum Size (dxy) 410 x 755mm 410 x 455mm 410 x 355mm 410 x 315mm 450mm (see max & min) Each tray is supplied with 2 small dividers (94mm) and 1 large divider (143mm). Extra dividers available on order. 43 5 CABINET ORGANISERS & ACCESSORIES 5.4 Lighting Solutions Fluorescent Cabinet Light Description Surface Mount Fluorescent Cabinet Light Item No: 1832 Size Ø88mm RS Code RKW409 24mm Ø88mm Leadwire 0.5m LED Adjustable Downlight - set of 3 Ø40mm Description LED Adjustable Downlight - set of 3 lights 1 x Transformer included Replacement Transformer Item No: 1833 Size Ø52mm RS Code RKW410 RKW429 Ø52mm Leadwire 1.5m (each set contains 3 lights) 35mm Rectangular Surf/Mount Downlight Description Item No: 1110 Size RS Code Rectangular Surface Mounted Downlight 132 x 85 x 50mm RKW418 Transformer (sold separately) KET 60A RKW419 Replacement Bulbs 12 V RKW430 13 50mm 2m m 85 mm 1 x Transformer required for every 3 lights connected Rectangular Surf/Mount Downlight Description Item No: 1113 Size RS Code 17 8m m 13 9m m 65mm Rectangular Surface Mounted Downlight 178 x 139 x 65mm RKW420 with Socket (Transformer included) Replacement Bulbs 12 V RKW430 Full technical information available on request. Specifications and design subject to change without notice. 44 CABINET ORGANISERS & ACCESSORIES 5.4 Lighting Solutions Corner Light with 4 Sockets Description Corner Light with 4 Sockets (to fit 2-point plugs) Replacement corner light, phospor tube Item No: 1109 Size 855mm 18W RS Code RKW417 RKW428 5 65 mm 85 mm 855 mm Butt Joint Connector Linkable Cabinet Light Description Linkable Cabinet Light with Sensor Linkable Cabinet Light with Sensor Replacement Phosphor Tube Replacement Phosphor Tube Item No: 1106 Size 354 x 68 x 24mm 582 x 68 x 24mm 354mm (8W) 582mm (13W) RS Code RKW413 RKW414 RKW426 RKW427 68 mm 68 mm 24 mm 354 / 582 mm Can link up to maximum 10 identical units. Detection angle 60˚ (maximum time duration 10sec, 3min or 5min preset) Motion Sensor Closet Light with Sensor Description Closet Light with Sensor Closet Light with Sensor Replacement closet triphosphor fluo tube Replacement closet triphosphor fluo tube Item No: 1834 Size 867mm 1167mm 867mm (14W) 1167mm (21W) RS Code RKW411 RKW412 RKW425 RKW431 50mm 50mm Detection angle 110˚ (maximum time duration 3min) 867mm / 1167mm Motion Sensor 45 5 CABINET ORGANISERS & ACCESSORIES 5.4 Lighting Solutions Fluorescent Cupboard Shelf Light Description Fluorescent Cupboard Shelf Light Item No: 1114 Size 867mm RS Code RKW421 867mm Push Button Switch Description Push Button Switch 350mm Item No: 1115 Size 35 x 23 x 11mm RS Code RKW422 Full technical information available on request. Specifications & design subject to change without notice. Push Button Switch - Switch activated with opening and closing of door. Magnetic Touch Switch Description Magnetic Touch Switch Item No: 1116 Size Ø16mm x 11mm RS Code RKW423 Full technical information available on request. Specifications & design subject to change without notice. new Aluminium Led Strip Item No: 1187/1188 Size 865mm RS Code RKW445 RKW446 Description Aluminium Led Strip LED Driver 3 Way Connector 867mm new Surface Mount Int. Lighting EXT22 Item No: 1750 Size 567mm 867mm 1168mm 24V RS Code RKW503 RKW504 RKW514 RKW505 Description Interior Lighting Surface Mount EXT22 Interior Lighting Surface Mount EXT22 Interior Lighting Surface Mount EXT22 24V Transformer Interior lighting for pull-out units with 165mm light segments with an optical sensor. 22 46 12 CABINET ORGANISERS & ACCESSORIES 5.4 Lighting Solutions new ECOREGLED Surface Mount 5 Item No: 1751 Size 300mm 900mm 12V RS Code RKW506 RKW507 RKW508 Description ECOREGLED Surface Mount 300mm ECOREGLED Surface Mount 900mm 12V Transformer The eco-FRIENDLY AND ECONOMICAL GENERATION of the surface-mounted series for COUNTERTOP lighting. 34 mm 100 Practical touch button for 100% power-on, 50% light reductions, power-off. new Recessed Profile INC30 12 Item No: 1752 Size 567mm 867mm 24V RS Code RKW509 RKW510 RKW505 Description Recessed Profile INC30 Recessed Profile INC30 24V Transformer Interior lighting for wall cabinets with optical sensor. 30 new Recessed Profile INC17 for Wardrobes 10 Item No: 1753 Size 2400-2600mm 24V RS Code RKW511 RKW505 Description Recessed Profile INC17 for wardrobes 24V Transformer Interior Lighting for Wardrobes with light segments and presence sensor. 17 12 47 5 CABINET ORGANISERS & ACCESSORIES 5.5 Shelf Supports Shelf Support Description Shelf Support 276LC • • • • • • Item No: 1243 Size 112mm RS Code RIH1197 min. 103 Ø12 22 For invisible fastening of shelves in woodwork or masonry Wood thicknesses: minimum 24mm Height adjustment: ±2mm Inclination adjustment via supporting bolt which presses on the rear plate when turned in Distance between shelf supports: maximum 700mm Shelf depth: maximum 300mm 112 4 70 14.5 Ø12 11 Supporting Bolt 68 54 6 6 20 Shelf Support (with locking mechanism) Description Shelf Support 276 LCN • • • • • Item No: 1244 Size 112mm RS Code RIH1198 22 Ø12 Ø8 A locking fitting prevents the joint from disengagement For invisible fastening of shelves in woodwork or masonry Wood thicknesses: minimum 24mm Height adjustment: ±2mm Inclination adjustment via supporting bolt which presses on the rear plate when turned in • Distance between shelf supports: maximum 700mm • Shelf depth: maximum 300mm 112 92 Ø12 Ø7 6 11 6 LOAD IN KG evenly distributed 20 Ø15 70 14.5 68 54 10 20 105 93 5 Ø15 15 10 20 0 250 300 DEPTH IN MM 48 CABINET ORGANISERS & ACCESSORIES 5.5 Shelf Supports Heavy Duty Shelf Support Description Shelf Support Concealed Heavy Duty Triade XXL Item No: 1662 RS Code RIH1530 5 TRIADE XXL is a concealed mounting bracket for shelves minimum 40mm thick. It is provided with three independent adjustments: 1. Vertical 2. Horizontal 3. Inclination The capacity loading is 20kg each (shelf weight included) for a shelf max 400mm deep. Shelf minimum depth is 300mm. PATENT PENDING Ø16 49 Zinc Alloy and Steel 62 3,5 285 74,5 VERY IMPORTANT: Centre of the hole is shifted 3,5mm upwards. Please keep in mind when levelling the shelf. FIXING TO CEMENT WALL VERY IMPORTANT: Triade XXL has to be installed with the arrow facing upwards. FIXING: • to cement wall with rawlplugs Ø8mm & pan head screws Ø5x50mm. It is the responsibility of the customer: • to ensure the wall is of a suitable quality to hold the shelf fixing in place. SHELF INSERTING AND HORIZONTAL ADJUSTMENT Tilt the shelf to match both supporting pins and shelf housings Insert partially the shelf Adjust the shelf horizontally according to the application (i.e. multi-shelf composition) +2 ,5 +2 ,5 COMBINATION SHELF LOAD AND SHELF DEPTH (The figures refer to ONE shelf support) LOAD IN KG evenly distributed 30 25 28,5 400 20 20 0 250 300 350 400 mm MA X DEPTH IN MM + SHELF WEIGHT= 20 Kg MAX + Shelf weight = 20kg maximum 49 5 CABINET ORGANISERS & ACCESSORIES 5.6 Floating Cabinet Brackets Heavy Duty Hanging Brackets The new patented 807 hanging system is a revolution for the world of suspended base cabinets. Made totally in metal, it has a thickness of only 10mm, and is able to support very heavy loads with a guarantee of safety. The innovative and revolutionary anti-drop system which is activated automatically when the bracket is hooked into the wall plate and prevents the cabinet from accidentally falling from the wall. Tested to European norms EN14749, EN14688 and ISO 7170, it has a declared loading capacity of 120 kg, which is stamped on each piece. Very easy to fit, through 4 x 10mm diameter holes in the side panel of the cabinet, where the 4 dowels are inserted, it has an adjustment range of 19mm horizontally and 22mm vertically. The system is completed by a compatible cover in plastic. Load capacity: 120kg per bracket. It is the responsibility of the customer: • to ensure the wall is of a suitable quality to hold shelf fixing in place. • to use the proper hardware fittings according to construction wall. 22mm 19mm 12 new Base Cabinet Hanger Item No: 1657 RS Code RIH1488 RIH1489 10 18 min 20 20 32 Description RH Base cabinet hanger LH Base cabinet hanger 8 new Anti Drop Wall Plate Item No: 1657 RS Code RIH1490 Description Anti drop wall plate 64 12 30 new Hanging Bracket Cover Cap Item No: 1657 RS Code RIH1486 RIH1487 Description 20 RH White Cover cap LH White Cover cap Ø10 50 CABINET ORGANISERS & ACCESSORIES 5.6 Floating Cabinet Brackets 5 96 230 96 18 32 26 250kg load capacity per bracket 182.5 64 100 Top 64 64 5mm up or down adjustment 195 Side 35 Floating Cabinet Bracket Heavy Duty Description new Floating Cabinet Bracket Heavy Duty Item No: 1653 RS Code RIH1427 Load capacity: 250kg per bracket. 2.5mm steel. Black Board cut out detail 51 6 HARDWARE 6.1 Wire Management 22 new Wire Management Item No: 1503 RS Code RIH1313 RIH1312 RIH1311 Description 80mm Round Wire Management Brush Nickel 737 80mm Round Wire Management White 737 80mm Round Wire Management Black 737 Ø80 Ø87 22 new Wire Management Item No: 1536 RS Code RIH1247 RIH1248 RIH1629 Description 80mm Round Wire Management Black 80mm Round Wire Management Oak 80mm Round Wire Management Silver Ø80 95 22 new Wire Management Item No: 1554 RS Code Description 85 Ø80 80mm Square Wire Management Black BK 737-80F RIH1316 80mm Square Wire Management Brush Nickel BK 737-80F RIH1317 85 22 new Wire Management Item No: 1555 RS Code RIH1315 Description 85 Ø80 80mm Square Wire Management Black BK 738-80F 85 22 new Wire Management Item No: 1556 RS Code RIH1314 Description 80mm Round Wire Management Black BK 738-80Y Ø80 new Hole Saw Cutter Item No: 1800 RS Code RIH1616 RIH1615 Description Ø85 Ø60 Hole Saw Cutter Ø80 Hole Saw Cutter Ø70 20 Ø60 60mm Wire Management Description Black Grey Oak Item No: 921 RS Code RIH646 RIH648 RIH647 52 HARDWARE 6.2 Wire Managements & Vents Cable Outlets Description new new 6 Item No: 1136 Size 240 x 80 x 13mm 80 x 80 x 13mm RS Code RKW433 RKW434 Cable Outlet (oblong) Cable Outlet (square) 240 80 80 70 80 70 14 230 14 70 Aluminium Air Vent Description new Aluminium Air Vent Item No: 791 Size 400 x 80mm RS Code RIH1108 400 80 65 1.20 17.80 380 320 10 Plastic Airvents Description new Plastic Airvent (Brown) new Plastic Airvent (Silver) Item No: 1131 Size 225 x 65 x 10mm 225 x 65 x 10mm RS Code RIH1186 RIH1120 67 60 219 225 53 6 HARDWARE 6.3 Knock Down Fittings Brown & White Plastic Rafix Description 20mm BROWN Plastic Rafix with die-cast cam 20mm WHITE Plastic Rafix with die-cast cam Item No: 1141 RS Code RIH1125 RIH1126 new Wedge Fitting Item No: 1280 RS Code RIH1178 RIH1179 RIH1180 RIH1181 RIH1182 RIH1183 Description Wedge Fitting Black Wedge Fitting White Wedge Fitting Grey Wedge Fitting Cherry Wedge Fitting Oak Wedge Fitting Brown 20 1.2 12.5 8 22 Drilling A 9.5 24 M4 Connecting Bolt for sleeve Description M4 Connecting Bolt for sleeve Item No: 1145 RS Code RIH1130 Double sided assembly using 2 connecting screws with M4 threads in a sleeve for Ø5mm hole. M4 A Ø5 A Plastice Rafix without Cam Description 20mm WHITE Plastic Rafix without Cam Item No: 1142 RS Code RIH1127 1.2 20 12.5 8 22 9.5 24 Rafix Pin with Euro Thread Description Rafix pin with Euro Thread Item No: 1143 RS Code RIH1128 Modesty Blocks Description new Modesty Block White Plastic new Modesty Block Oak Plastic new Modesty Block Brown Plastic Item No: 1391 RS Code RIH1291 RIH1299 RIH1292 for Ø5 hole 54 HARDWARE 6.3 Knock Down Fittings Zinc Cam Description 15mm Zinc Cam only Item No: 1137 RS Code RIH1121 Ø15 8 12.5 34.5 6 12 Ø15 Ø8 Corner Pin (Euro thread) Description Corner pin 15mm with Euro thread Item No: 1138 RS Code RIH1122 34 11 for Ø5 hole Corner Pin (M6 thread) Description 34mm Corner Pin M6 (used with Nylon Dowel) Item No: 1293 RS Code RIH1123 34 11 M6 Corner Pin (M4 thread) Description Corner Pin M4 (34mm) Item No: 1139 RS Code RIH1131 Ø15 12.5 Double sided screw-mounting using 2 corner pins with M4 threads in a sleeve for Ø5mm hole. 34.5 (used with M4 Double connecting sleeve for double sided connections) Ø8 Ø5 M4 Double Connecting Sleeve Description Double Connecting Sleeve M4 Item No: 1144 RS Code RIH1129 Nylon Dowel (M6 thread) Description 10mm Nylon Dowel with M6 thread Item No: 1140 RS Code RIH1124 M4 for Ø5 hole for Ø10 hole M6 14 11 55 6 HARDWARE 6.4 Brackets and Connectors new Hasp & Staple 75mm Item No: 1546 RS Code RIH1393 new Flat Plate with Epoxy Item No: 1388 RS Code RIH1286 Description Hasp & Staple 75mm Brass Plated Description Flat Plate with Epoxy 82 46 new Galvanised Fixing Plate (4 Holes) Item No: 1287 RS Code RIH1234 new Triangle Hanging Plate - Galvanised Item No: 1288 RS Code RIH1235 Description Galvanised Fixing Plate 40 x 50 x 1.6mm Description Triangle Hanging Plate - Galvanised 50 40 50 98 new Hanging Plate 62mm (3 Holes) Item No: 1384 RS Code RIH1285 new Shelf Studs Item No: 1416 RS Code RIH1294 RIH1298 Description Hanging Plate 62mm 62 Description Shelf Stud Brass Plated Shelf Stud for Brass Plated Socket 50 new Mounting Bracket Small Item No: 805 RS Code RIH1320 new Mirror Corners Small STD 6mm Item No: 1399 RS Code RIH1293 Description Steel mounting bracket, small white Description Mirror Corners Small STD 6mm, Nickel Plated 22 35 30 56 HARDWARE 6.5 Hinges new Butt Hinge 50mm Brass 6 Item No: 1333 RS Code RIH1275 new Easy Fit Hinge 64mm Nickel Item No: 1330 RS Code Description Butt Hinge 50mm Brass Plated Description Easy Fit Hinge 64mm - 1.2mm Matt Nickel Plated RIH1271 new Cranked Hinge Yellow Zinc Item No: 1335 RS Code RIH1277 new Easy Fit Hinge 64mm Brass Item No: 1330 RS Code Description Cranked Hinge Yellow Zinc Description Easy Fit Hinge 64mm - 1.2mm Matt Brass Plated RIH1272 new Flush Hinge 50mm Yellow Zinc Item No: 1329 RS Code RIH1269 new Single Cranked Hinge Yellow Zinc Item No: 1332 RS Code Description Flush Hinge 50mm Yellow Zinc Plated Steel Description Single Cranked Hinge 6mm Offset Yellow Zinc plated RIH1274 new Easy Fit Hinge 55mm Brass Item No: 1329 RS Code RIH1270 new Round Backflap Hinge Brass Item No: 1334 RS Code RIH1276 Description Easy Fit Hinge 55mm Brass Plated Steel Description Round backflap Brass Plated Steel 57 6 HARDWARE 6.6 Office Hardware new Wire Basket Fixing Bracket new Item No: 1617 Size 86mm RS Code RIH1436 new Wire Management Basket - 1.2m Item No: 1617 Size RS Code RIH1420 RIH1625 RIH1421 Description Fixing bracket for wire basket Fixing bracket for wire basket 3 Description Wire Management Basket, 1.2m (incl. 4 clips) 86 Wire Management Basket, 1.2m (incl. 4 clips) 130 Wire Management Basket Clips 86 130mm RIH1626 30 30 73 130 96 86/130 118/144 73 new Fixing Bracket Item No: 1618 RS Code RIH1440 46 new 140 x 140mm Plate Item No: 1619 RS Code RIH1441 Description Fixing Bracket Office Furniture, width 40mm Description 140 x 140mm Fixing Plate 354 96 96 140 96 96 9.5 40 1.5 3 140 96 new 140 x 44mm Plate Item No: 1620 RS Code RIH1442 44 new Rectangular Screen Bullet Fixing Bracket Item No: 1618 RS Code RIH1439 Description 140 x 44mm Fixing Plate Description Fixing Bracket Rectangular Screen Bullet 70 45 96 3 140 3 19 6.5 new Rectangulat Screen Bullet Item No: 1636 RS Code RIH1437 RIH1438 new Screen Bracket Item No: 1638 RS Code RIH1444 Description Rectangular Screen bullet Rectangular Screen bullet Description Screen Bracket 105 150 50 5 155 50 10 58 HARDWARE new new Support Bracket 6 6.6 Office Hardware Item No: 1804 RS Code RIH1617 M8 Item No: 1802 RS Code RIH1627 70 50 new Ø38 x M8 Base Leveler Description Support Bracket Description Ø38 x M8 base leveler 15 70 9.5 Ø38 new Ø50mm Expanding Base Leveler Item No: 1806 Ø25 insert pressed into leveler to expand Ø20 new Ø25 x M6 Base Leveler Item No: 1805 RS Code RIH1618 M6 Description Ø50mm Expanding base leveler RS Code RIH1619 Description Ø25 x M6 Base Leveler 15 7 Ø25 Ø35 Ø50 new Modesty Panel Bracket Item No: 1637 RS Code RIH1443 RIH1566 new Filing Drawer Support Bracket Item No: 1803 RS Code RIH1620 Description Modesty Panel Bracket with fixed support Modesty Panel Bracket without support Description Filing drawer support bracket, Black Modesty Panel Bracket sold with fixed support or without support. 96 146 110 340 3 30 110 59 6 HARDWARE 6.7 Castors new Olym Castor Black & White Item No: 1513 Size 75mm 13 26 M10 new Koo Castor Grey & White Item No: 1512 Size 75mm RS Code RIH1323 Description Olym White ABS Core, Black PU Thread, with brake Weight capacity: 50kg RS Code RIH1324 Description Koo Castor Grey & White, without brake Weight Capacity: 50kg 42 M10 15 100 15 100 Ø75 Ø75 Koo Castor Black & White Description new Koo White ABS Core, Black PU Thread, Item No: 1514 Size 75mm RS Code RIH1322 Eva Castor Grey Description new Dark Grey ABS Core, Light Grey PU Item No: 1522 Size 75mm RS Code RIH1321 42 M10 with brake Weight capacity: 50kg Thread, with brake Weight Capacity: 50kg 42 M10 15 100 15 100 Ø75 Ø75 Olym Castor Grey Description new Olym Grey ABS Core, White PU Thread, Item No: 1511 Size 75mm 13 26 M10 new Mini Castor Item No: 1630/1631 Size 50mm 50mm 18 RS Code RIH1325 Description Black with flat base, with brake Black with flat base, without brake Weight Capacity: 45kg RS Code RIH1430 RIH1431 without brake Weight Capacity: 50kg 55 15 100 Ø40 25 25 Ø75 60 35 HARDWARE 6.8 Nails, Rumber Nuts, Screws and Bolts new Rumber Nuts 6 Item No: 1642 RS Code RIH1448 new Director Screw Item No: 774 RS Code RSC190 Description Rumber Nuts M8 x 20mm (Drill Ø11 hole) 20 Description 6 x 50mm Director Screw M8 SW7 Ø11 Ø14.5 new Nail in Wall Anchors Item No: 1308 RS Code RIH1263 RIH1264 Description Nail in Wall Anchors 6 x 70mm Nail in Wall Anchors 6 x 55mm new Rumber Nuts Item No: 1640 RS Code RIH1446 10 M6 SW6 Ø8 Description Rumber Nuts M6 x 10mm (Drill Ø8 hole) new Wall Plugs 6mm / 8mm Ø11.5 Item No: 1127 RS Code RIH1116 RIH1117 Description Wall plugs 6mm Wall plugs 8mm new Rumber Nuts Item No: 1641 RS Code RIH1447 17 M6 SW6 Ø8 Description Rumber Nuts M6 x 17mm (Drill Ø8 hole) new Panel Pins & Wire Nails Item No: 1432 RS Code RIH1202 RIH1203 RIH1204 RIH1205 RIH1206 RIH1207 RIH1236 RIH1237 RIH1238 RIH1239 RIH1240 RIH1241 RIH1242 RIH1243 RIH1245 Description Panel Pin - 25 x 1.6mm (0.5kg) Panel Pin - 40 x 1.6mm (0.5kg) Panel Pin - 50 x 2mm (0.5kg) Wire Nail Wire Nail Wire Nail Panel Pin Panel Pin Panel Pin Wire Nail Wire Nail Wire Nail Wire Nail Wire Nail Wire Nail 25 x 1.6mm (0.5kg) 40 x 2mm (0.5kg) 50 x 2.5mm (0.5kg) 16 x 1.25mm (0.5kg) 20 x 1.25mm (0.5kg) 32 x 1.6mm (0.5kg) 63 x 2.8mm (0.5kg) 75 x 3.5mm (0.5kg) 100 x 4mm (0.5kg) 125 x 5mm (0.5kg) 150 x 5.6mm (0.5kg) 32 x 2mm (0.5kg) Ø10.5 new Rumber Nuts Item No: 1801 RS Code RIH1621 25 M10 SW10 Ø13 Description Rumber Nuts M10 x 25mm (Drill Ø13 hole) Ø16 61 6 HARDWARE 6.9 Catches, Escutcheons and Locks 13mm Adhesive Hole Covers Description White 20 per sheet) White (2000 per box) Alum (20 per sheet) Alum (2000 per box) Black (20 per sheet) Black (2000 per box) Ash/Maple (20 per sheet) Ash/Maple (2000 per box) Oak (20 per sheet) Oak (2000 per box) Cherry (20 per sheet) Cherry (2000 per box) Mahogany (20 per sheet) Mahogany (2000 per box) Beech (20 per sheet) Beech (2000 per box) new Tan (126 per sheet) new Tan (12600 per box) new Enoco (126 per sheet) new Enoco (12600 per box) new Eggshell (126 per sheet) new Eggshell (12600 per box) Item No: 781 RS Code RIH834 RIH835 RIH836 RIH837 RIH838 Black RIH839 RIH840 RIH841 RIH842 RIH843 RIH844 RIH845 RIH846 RIH847 RIH848 Mahogany Cherry Oak Ash/Maple Aluminium White new Escutcheon No 22/23 Item No: 1347 RS Code RIH1283 RIH1284 22 Description Escutcheon Plate No 22 Brass Escutcheon Plate No 23 Brass 23 Necked Flush Bolt 70mm Description 70mm Necked Flush Bolt Nickel Plated Steel new 70mm Necked Flush Bolt Brass Plated Steel Item No: 848 RS Code RIH715 RIH1279 Straight Flush Bolt 70mm Brass RIH849 RIH1556 RIH1557 RIH1558 RIH1559 RIH1560 RIH1561 Eggshell Tan new Item No: 847 RS Code RIH716 RIH1278 Beech new Description 70mm Straight Flush Bolt Nickel Plated Steel new 70mm Straight Flush Bolt Brass Plated Steel Enoco new new Escutcheon Item No: 1307 RS Code RIH1262 RIH1261 RIH1260 Cupboard Rooster Catch Description Cupboard Rooster Catch Nickel Plated Steel new Cupboard Rooster Catch Brass Plated Steel Item No: 855 RS Code RIH712 RIH1281 Description Escutcheon Black Plastic Escutcheon Gold Plastic Escutcheon Brown Plastic 62 HARDWARE 6.10 Door Lifts new Stay Folding 152mm 6 Item No: 1326 RS Code RIH1267 Description Stay Folding 152mm Nickel Plated Steel min 16 size shelf flap determined by trial mounting new Stay Fiction 250mm Item No: 1327 RS Code RIH1268 Description Stay Friction 250mm Zinc Plated Steel min 24 size shelf flap determined by trial mounting new Stay Brake 300mm Item No: 1325 RS Code RIH1266 min 24 Description Stay Brake 300mm Zinc Plated Steel size shelf flap determined by trial mounting 63 6 HARDWARE 6.11 Full Extension Drawer Slides and Damping Systems Full Extension Ball Bearing Slide (45mm self-closing) 45kg load capacity, 45kg per pair on 450mm • APPLICATIONS: Desk drawers, storage cabinets, kitchen cabinets, etc. • FEATURES: Long slide travel. Close automatically. • LOADING CAPACITY: 45kg per pair (450mm length). 45mm Full Extension Ball Bearing Slides, Steel Thickness 1.2mm, Load Capacity 45kg per pair 450mm length (Tested to 50 000 openings) Description Ball bearing slide self closing F/Ext 450mm (Black) Ball bearing slide self closing F/Ext 500mm (Black) Ball bearing slide self closing F/Ext 450mm (BRS) Ball bearing slide self closing F/Ext 500mm (BRS) Drilling detail for 45mm Slide 450 500 A B C D E F 35 64 C B Self-closing mechanism Item No: 1248 RS Code RIH1042 RIH1043 RIH1044 RIH1045 A 450 192 320 445 160 192 500 192 320 495 192 224 D 35 F E 12.7 TRAVEL ±3 A 45.6 35.6 Drawer Damping Systems (Used on standard drawers with standard drawer runners, ball bearings and metabox runners.) new Drawer Damping System Item No: 1663 RS Code RIH1228 Description Drawer Damping System (Sold in pairs.) Maximum weight: 10kg for a 450mm cabinet. For a wider cabinet use both damping systems - left and right. 46 225 on cabinet side board drawer upside 14 129 30 10.5 on cabinet side board Technical data sheet inside packaging. Installation for Meta Box Installation for Ball Bearing slide Installation for Drawer Slide 40 225 on cabinet side board 1 3 2 4 129 14 123 30 on cabinet side board 10.5 64 harn moving innovations HARN 7 Drawer Systems .1 7 ultimate drawer solution TRIOMAX Triomax is the epitome of refined elegance, operation simplicity, superior performance and application diversity. Harn’s commitment to quality and reliability makes Triomax the ultimate partner to any cabinet. Its smooth running action and attractive design blend harmoniously with modern homes and kitchens. The new Triomax T5 drawer systems offer improved lateral stability, quieter operations and precise adjustments. Wide drawers have a tendency to skew when opening force is applied at either one end of the drawer. This is common in drawers equipped with a continuous handle. The new T5 allows for a maximum cabinet width of 1.5 meters without the aid of any external stabiliser. Installation is kept simple and cost effective. Standard load capacity of 50kg caters for most storage requirements. The super smooth sliding action offers effortless opening and closing every time regardless of the drawer’s load weight. KEY FEATURES: • Full extension / Epoxy coated finishing. • Roller bearing concealed runners. • Standard load capacity of 50kg. • Drawer lengths between 270mm to 500mm. • Steel drawer sides of 83mm and 115mm. • Side extendable to 204mm. • Sylent integrated soft-close system. • Integrated lateral stabilisers. www.raiel.com or www.harn.com Harn Triomax catalogues available on request or can be viewed on our website at: impressive IMPAZ IMPAZ drawers runners are popular with cabinet makers. The highly configurable drawer runner system makes it versatile and highly suitable for most requirements. The epoxy coating forms a smooth and durable finishing, making it easy to maintain and looking great for years to come. Designed to inspire with the assurance of quality and reliability, the Harn Impaz drawer system and its versatile accessories make it ideal for most applications. Configurations are only limited by one’s imagination. The installation and assembly procedures are designed to be fast, simple and precise using minimum tools. impaz is a reliable, stylish, practical and economical solution for modern kitchens, homes and offices. It will impress even the most discerning users. KEY FEATURES: • Single extension. • Load capacity of 30kg. • Drawer side heights of 85mm and 149mm. • Side extendable to 213mm. • Drawer lengths between 270mm to 500mm. • Smooth rolling mechanism. Roller runners. • Double out-stop safety feature. • Epoxy coated finishing. www.raiel.com or www.harn.com Harn Impaz catalogues available on request or can be viewed on our website at: reliable BASIC Basic drawer runners. KEY FEATURES: Single extension. Epoxy coated. Load capacity of 20kg. 2.5mm wheel tolerance. Self closing feature. Smooth rolling mechanism. Double out-stop safety feature. Harn Basic catalogues available on request or can be viewed on our website at: www.raiel.com or www.harn.com We reserve the right to change any technical specifications without prior notice. 65 8 SALICE 8.1 General Instructions Proud distributor of hinges We are pleased to announce our strategic alliance with the world famous Italian brand “SALICE”, whose Hinges and Smove are number one in the world, for distribution of their product in South Africa. This is a concrete move to have a better presence in the upper-end fittings market, which include the following: HINGE APPLICATIONS: • Series 800 Clip on Hinges 110° Full Overlay, Half and Inset • Series 200 Clip on Complimentary Hinges 155°, Pie Cut and 45° • Series 700 Clip On Soft Closing Hinges 110° Full Overlays, Half and Inset • Series Push Hinges for handless doors • Series 200 Glass Hinges for inset doors • Accessories for hinges cover caps, etc. LIFT OPENING SYSTEMS: • Single Flap Doors • Folding Doors • Parallel Opening Doors Accredited by SINCERT - DAR - NACCB RAB - INMETRO Accredited by SINCERT - DAR - NACCB RAB KEY to Abbreviations S D T K A L H G = = = = = = = = Thickness of the cabinet side Required door overlay Door thickness Drilling distance Reveal Gap between door and carcass Height of the mounting plate Hinge constant “C” Value With this formula you can obtain the maximum thickness of the moulded door that can be opened without touching adjacent carcass sides, doors or walls, whilst bearing in mind the below L-K-T values. C=20 + K + A SERIES 800 Assembly Instructions with the use of Series 200 Mounting Plates 2 1 3 4 Then press lightly on the end of the arm to secure (clip on) the latch. Application with FULL OVERLAY (F/O) door To remove the hinge from the mounting plate, press release clip as indicated. Application with HALF OVERLAY (H/O) door Application with INSET door 66 Proud distributor of hinges SALICE 8.1 General Instructions HINGE CUP DRILLING 8 RATIOS: HINGES in relation to DOOR WEIGHT Approx. number of hinges required according to the door dimension and weight. 45 9.5 K 11 9.5 5 Ø3 Height of Door (cm) SIDE (LATERAL) ADJUSTMENT Series 200 MAX VARIATION: -1.5 to +4.5mm Width of Door (cm) Weight of Door (N) 1N = 0.102KG Space needed to open the door (mm) -1.5 to +4.5mm (MAX VARIATION) The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have rounded edges. A specially developed technical solution allows the sideways adjustment of the door while maintaining the gap behind the door (“L” value of 0.7mm). The adjustment screw operates in conjunction with the inner leaf of the hinge arm. The door moves in only one direction: parallel to the carcass and without a gap developing between the door and the carcass. 67 8 SALICE 8.1 General Instructions MAX. ADJUSTMENTS: Series 800, 700 & 200 ● SIDE adjustment from -1,5mm to +4,5mm ● HEIGHT adjustment -2mm to +2mm ● DEPTH Series 200: adjustment from -1,5mm to +3mm Series 700 & 800: adjustment from -0,5mm to +2,8mm Series PUSH: Depth adjustment from -0,5mm to +2,8mm Please Note: Whenever adjustments are made exceeding the maximum indicators, the lifespan of the hinges are compromised. Proud distributor of hinges Series 800 MAX VARIATION: -1.5 to 4.5mm -1.5 + 4.5mm Sideways adjustment of the door is made by using the indicated screw. It is possible to recover the gap behind the door (the initial “L” value of 0.7 mm) simply by using the assembly stop located on the underside of the hinge. DEPTH ADJUSTMENT Series 200 HEIGHT ADJUSTMENT The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the door to be adjusted frontally by + 2,8 mm. Finally the fixing screw must be retightened. Series 800 Series 200 with snap-on mounting plates The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the door to be adjusted frontally from -1,5 mm to +3 mm. Finally the fixing screw must be retightened. The hinge fixing screw is slackened and an oval slot on the arm of the hinge enables the door to be adjusted frontally by + 2,8 mm. Finally the fixing screw must be retightened. NB! *If you require any application other than what we offer standard in our stock range please contact our head office for enquiries. 68 Proud distributor of hinges SALICE 8.2 Series 800 ■ IDEAL USE: When an opening angle (up to 110°) is required ■ CUP DEPTH: 11mm ■ DRILLING DISTANCE: 3 to 6mm from edge of door ■ MOUNTING PLATES: Must be ordered seperately to the hinge H= 15 + K - (D) Description Series 800 Clip-on 110° F/O Hinge use with Series 800 Trad. Mount. Plate Series 800 Clip On 110°F/O with Ø8x10 Dowel use with Series 800 Traditional Mount. Plate with Euroscrew Item No. 1151 1181 RS Code RIH1136 RIH1175 8 Series 800 110º Arm 0 (Economy Clip 110° FULL OVERLAY) 1259 1260 RIH1214 RIH1215 Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 9 (Economy Clip 110° HALF OVERLAY) H= 6 + K - (D) Description Series 800 Clip-on 110° H/O Hinge use with Series 800 Trad. Mount.Plate Series 800 Clip On 110° H/O with Ø8x10 Dowel use with Traditional Mount. Plate with Euroscrew Item No. 1152 1182 RS Code RIH1137 RIH1176 1261 1262 RIH1216 RIH1217 Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 17 (Economy Clip 110° INSET) H= -2 + K + A Description Series 800 Clip-on 110° Inset Hinge (use with Series 800 Trad. Mount. Plate) Item No. 1153 1182 RS Code RIH1138 RIH1176 94° Opening K = from 3 to 8 mm Series 800 Clip On 110° Inset with Ø8x10 Dowel (use with Traditional Mount. Plate with Euroscrew) 1263 1262 RIH1218 RIH1217 Option available with Ø8x10 Dowel & Mounting plate with euroscrews Series 800 Traditional Mounting Plates Description Series 800 Trad. Mount. Plate (F/O) Series 800 Trad. Mount. Plate (H/O & Inset) Series 800 Traditional Mount. Plate (F/O) Mount. Plate with Euroscrew Traditional Mount. Plate (H/O & Inset) with Euroscrew Item No. 1181 1182 1260 1262 RS Code RIH1175 RIH1176 RIH1215 RIH1217 Option available with with euroscrews 69 8 SALICE 8.3 Series 200 Proud distributor of hinges Series 200 155º Arm 0 (Series 200 Clip-on 155° FULL OVERLAY) ■ IDEAL USE: For an opening angle of up to 155° (eg. Corner Cupboards) ■ CUP DEPTH: 8mm die-cast cup ■ DRILLING DISTANCE: 3 to 8mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge H= 15 + K - (D) Description Series 200 Clip-on 155° F/O Hinge use with Clip-on Mounting Plate Series 200 Clip-on 155° F/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Item No. 1148 1179 RS Code RIH1133 RIH1173 1254 1255 RIH1209 RIH1210 Option available with Ø8x10 Dowel & Mounting plate with euroscrews Series 200 45º Complimentory Hinges Arm 45° (Series 200 Clip-on 45° Hinge) ■ IDEAL USE: For wooden doors with positive angled assembly (94° opening) ■ CUP DEPTH: 11mm metal cup ■ DRILLING DISTANCE: 3 to 8mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge Description Series 200 Clip-on 45° Hinge use with Clip-on Mounting Plate Series 200 Clip-on 45° Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Item No. 1149 1179 RS Code RIH1134 RIH1173 1256 1255 RIH1211 RIH1210 Option available with Ø8x10 Dowel & Mounting plate with euroscrews Series 200 Pie Cut Hinges for Corner Cabinets Sprung Hinge (Bi-fold Pie) ■ IDEAL USE: Maximum thickness of the door with square edges: 23mm ■ CUP DEPTH: 11mm die-cast cup. ■ OPENING ANGLE: for first door 70° ■ DRILLING DISTANCE: 3 to 6mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge For thicker doors or doors with mouldings or radiused edges, please refer to our technical assistance. Description Series 200 Clip-on Pie cut Hinge use with Clip-on Mounting Plate Series 200 Clip-on Pie Cut Hinge with Ø8x10 Dowel use with Series 200 Clip-on Mounting Plate with Euroscrew Item No. 1150 1180 RS Code RIH1135 RIH1174 1257 1258 RIH1212 RIH1213 Option available with Ø8x10 Dowel & Mounting plate with euroscrews Clip-on Mounting Plate Description Clip-on Mounting Plate for 155° Hinge Clip-on Mounting Plate for 45° Hinge Clip-on Mounting Plate for Pie Cut Hinge Clip-on Mounting Plate for 155° Hinge with Euroscrew Clip-on Mounting Plate for 45° Hinge with Euroscrew Clip-on Mounting Plate for Pie Cut Hinge with Euroscrew Item No. 1179 1179 1180 RS Code RIH1173 RIH1173 RIH1174 1255 1255 1258 RIH1210 RIH1210 RIH1213 Option available with with euroscrews 70 Proud distributor of hinges SALICE 8.4 Series 700 - Silentia 8 Series Hinges Silentia 700 Soft Closing Arm O (Silentia 110° FULL OVERLAY Hinge) ■ IDEAL USE: New generation hinges with Integrated Soft-closing Systems ■ CUP DEPTH: 13,5mm steel. Cup Spacer must be ordered seperately ■ DRILLING DISTANCE: 3 to 6mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge ■ OPENING ANGLES: 110° H= 15 + K - (D) Description Item No. RS Code RIH1139 RIH1173 Series 700 Silentia Clip-on 110° F/O Hinge 1154 use with Clip-on Mounting Plate 1179 Series 700 Silentia Clip-on 110° F/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 9 (Silentia 110° HALF OVERLAY Hinge) H= 6 + K - (D) Description Item No. 1264 1255 RIH1219 RIH1210 RS Code RIH1140 RIH1141 Series 700 Silentia Clip-on 110° H/O Hinge 1155 1156 use with Clip-on Mounting Plate Series 700 Silentia Clip-on 110° H/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 17 (Silentia 110° INSET Hinge) H= -2 + K + A Description Item No. 1265 1266 RIH1220 RIH1221 RS Code RIH1184 RIH1141 Series 700 Silentia Clip-on 110° Inset Hinge 1185 use with Clip-on Mounting Plate 1156 Series 700 Silentia Clip-on 110° Inset Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Option available with Ø8x10 Dowel & Mounting plate with euroscrews Clip-on Mounting Plate CUP SPACER to REDUCE the CUP DEPTH 1267 1266 RIH1222 RIH1221 Option available with with euroscrews Description Clip-on Mounting Plate for F/O Hinge Clip-on Mount.Plate for H/O & Inset Hinge Clip0on Mounting Plate for F/O Hinge with Euroscrew Clip-on Mount. Plate for H/) & Inset Hinge with Euroscrew Item No. 1154 1156 1255 1266 RS Code RIH1173 RIH1141 RIH1210 RIH1221 Description Silentia Spacer with thickness of 1.2mm Item No. 1157 RS Code RIH1142 71 8 SALICE 8.5 Series Push Proud distributor of hinges Series PUSH The PUSH system is a self-opening system for the doors of all types of handleless furniture. It consists of a series of self-opening hinges, release devices (the PUSH) that can be fitted to the top, base or side panel of the cabinet and retaining catches to be fitted to the back of the door. The PUSH release device is available in a mechanical version that is fitted to the cabinet side using screws and a magnetic version that can be surface mounted using a holder or ecessed into the edge of the cabinet. The retaining catches are pressure fixed with special pistons. For doors over 1600mm in height, we suggest that you use 2 x mechanical release catches or a single magnetic release device together with a supplementary magnetic catch. Series PUSH Hinges & Accessories Arm 0 (Series 200 PUSH 110° FULL OVERLAY Hinge) ■ IDEAL USE: Push action to open & close cupboards with minimum effort ■ CUP DEPTH: 11mm steel ■ OPENING ANGLES: 110° ■ DRILLING DISTANCE: 3 to 6mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge ■ The PUSH device is available in a mechanical version & magnetic version Description Series 200 Push Clip on 110° F/O Hinge use with Clip-on Mounting Plate Series 200 Push Clip-on 110° F/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Item No. 1160 1179 RS Code RIH1145 RIH1173 1268 1255 RIH1223 RIH1210 Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 17 (Series 200 PUSH 110° HALF OVERLAY Hinge) H= 6 + K - (D) Description Series 200 Push Clip on 110° H/O Hinge use with Clip-on Mounting Plate Series 200 Push Clip-on 110° H/O Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Option available with Ø8x10 Dowel & Mounting plate with euroscrews Arm 17 (Series 200 PUSH 110° INSET Hinge) H= -2 + K + A Description Item No. RS Code RIH1147 RIH1141 Item No. 1161 1156 RS Code RIH1146 RIH1141 1269 1266 RIH1224 RIH1221 Series 200 Push Clip on 110° INSET Hinge 1162 use with Clip-on Mounting Plate 1156 Series 200 Push Clip-on 110°Inset Hinge with Ø8x10 Dowel use with Clip-on Mounting Plate with Euroscrew Option available with Ø8x10 Dowel & Mounting plate with euroscrews Clip-on Mounting Plate Description Item No. 1270 1266 RIH1225 RIH1221 RS Code RIH1173 RIH1141 RIH1210 RIH1221 Option available with with euroscrews Clip-on Mounting Plate for F/O Hinge 1179 Clip-on Mount. Plate for H/O & Inset Hinge 1156 Clip-on Mounting Plate for F/O Hinge with Euroscrew 1255 Clip-on Mounting Plate for H/O & Inset Hinge with Euroscrew 1266 72 Proud distributor of hinges SALICE 8.5. Series Push Description Mechanical Release Device with adjustment Item No. 1163 RS Code RIH1148 8 Mechanical Release Device with Adjustment Retaining catches for wooden door Description Retaining catches for wooden door Item No. 1164 RS Code RIH1149 Magnetic release Device for Doors 1600mm Description Supplementary Magnetic catch for Doors over 1600mm Item No. 1166 RS Code RIH1151 Optional adapter if magnetic release device if not recessed in the side of the cabinet Description Adjustable plastic adapter for release device Item No. 1167 RS Code RIH1152 73 8 SALICE 8.5. Series Push Proud distributor of hinges APPLICATION of the Mechanical Release Device and the Magnetic Release devise APPLICATION of the Mechanical Release Device The adjustable PUSH system consists of a release device and a screw fixed adapter, which has been developed to improve the action of the system. ADJUSTABILITY: -1mm to +2.5mm (controlled by a small adjuster wheel located at the back) Sideways adjustability: -2mm to +2mm (this can by done by loosening the 2 fixing screws & adjusting along the elongated holes before retightening) 8.5 2.5 35 Y APPLICATION of the Release Device to be recessed Drill a hole Ø10mm and min. 40mm depth in the top, the side or the base panel of the cabinet. Insert the release device into the hole. APPLICATION of the Release Device Application Release the device into the adapter. Place the adapter to the top, the side or base panel of the cabinet, using the drilling value of 37x32mm for final positioning. ø 10 S 26 Min 5 40 min 2.5 T 32 RETAINING CATCH to be inserted Apply the retaining catch to the Magnetic release device. Close the door. The sharp point of the retaining catch will mark where to insert it. 37 2.5 10 Min 74 Proud distributor of hinges SALICE 8.6 Series 200 for Glass Doors 8 Series 200 complimentary hinges for ■ IDEAL USE: Cabinet doors of GLASS or PERSPEX 4 to 6mm thick ■ HOLE DIAMETRE: 26mm ■ OPENING ANGLES: 94° ■ DRILLING DISTANCE: 5.5 to 6.5mm from edge of door (K) ■ MOUNTING PLATES: Must be ordered seperately to the hinge ■ COVER CAPS: Must be ordered seperately to the hinge. Glass Doors 94º Arm 17 (Series 200 GLASS Clip-on 94º INSET Hinge) H= - 4,5 + K + A Description Item No. RS Code RIH1143 RIH1141 RIH1221 Series 200 GLASS Clip-on 94º INSET Hinge 1158 use with Clip-on Mounting Plate 1156 use with Clip-on Mounting Plate with Euroscrew 1266 Clip-On Mounting Plate Description Clip-on Mounting Plate Clip-on Mounting Plate with Euroscrew Item No. 1156 1266 RS Code RIH1141 RIH1221 Option available with with euroscrews Cover Caps Description COVER CAPS for Glass Hinges BLACK COVER CAPS for Glass Hinges SILVER Item No. 1159 1159 RS Code RIH1177 RIH1144 75 8 SALICE 8.7 Lift Systems - Single Flap Doors Proud distributor of hinges Single Flap Door The Push self opening system could be used for doors up to 400mm in height. The door can be opened with or without a handle. General Information: The Gas Piston Strength on the arm is determined in relationship with the dimensions & weight of the doors, which will also determine if one or two arms are neccessary. Their are also two types of pistons available in the various strengths which determines how you want the action of the door to open, which are the following: ■ Standard Piston This piston is for a single operation door, when the door is opened, it opens fully to the top, which the arm is able to be adjusted Min70°- Max90° ■ Progressive Piston This piston is a for a progressive opening door, when you open the door you open and close the door to the angle which you open the door. Correspond Piston strengths available in the stock program to determine the amount of arms needed as well as piston strength required on the graphs, a calculation is CD available on request. The Door can be opened with or without a handle. If a handle is used it can be positioned anywhere on the door. Alternatively, for doors up to 400mm in height that are not fitted with a handle for aesthetic reasons, the push self-opening system can be used. 177 32.5 230 Minimum Space Required 76 Proud distributor of hinges SALICE 8.7 Lift Systems - Single Flap Doors Description Single Flap Door Left Arm Single Flap Door Right Arm (ordered with mounting plate for Door) (for the arm) Item No. 1168 1168 1174 RS Code RIH1153 RIH1154 RIH1167 8 Single Flap Door Left Arm Single Flap Door Right Arm Series 200 110° FULL OVERLAY Hinge Description Series 200 Clip on 110° F/O Hinge (use with Clip-on Mounting Plate) Series 200 Clip on 110° F/O Hinge with Ø8x10 Dowel Available in Push System as well. Item No. 1147 1178 1253 RS Code RIH1132 RIH1172 RIH1208 Mounting Plates (Slim shape) Description Clip-on Mounting Plate Clip-on Mounting Plate for Door Item No. RS Code 1178 1174 RIH1172 RIH1167 Smove for arms for doors up to 6kg in weight or up to 360mm in height Smove for arms for doors over 6kg in weight or over 360mm in height Description Smove for arms for doors up to 6kg in weight or up to 360mm in height Item No. RS Code 1173 RIH1165 Description Smove for arms for doors over 6kg in weight or over 360mm in height Item No. RS Code 1173 RIH1166 Description Smove Push for flap doors Smove for doors if Push Opening system used Item No. RS Code 1570 RIH1415 77 8 SALICE 8.7 Lift Systems - Single Flap Doors GAS PISTON Proud distributor of hinges Description Gas Piston Standard Gas Piston Standard Gas Piston Standard Gas Piston Standard 200N 350N 450N 500N Item No. RS Code 1171 1171 1171 1171 RIH1158 RIH1159 RIH1160 RIH1161 Choosing the correct GAS PISTON for CABINET WIDTHS 600, 900 & 1200 (mm) SINGLE-OPERATION doors using ONE PISTON (1 arm only) The diagram below defines the exact strength (Newton "N") of the piston to be used in relationship with the dimensions and weight of the door. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. kg 9 N 9 kg N 9 kg N 9 450 kg N 8 350 8 8 8 450 SINGLE-OPERATION doors using TWO PISTONS (arm on each side) This diagram defines the exact strength (Newton "N") of the pistons to be used in relationship with the dimensions and weight of the door. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 kg N 18 17 16 15 14 kg N 7 7 350 7 350 6 7 350 6 500 450 13 12 11 10 500 450 6 6 5 5 5 5 350 9 8 7 6 350 4 200 4 200 4 200 4 200 3 3 3 3 200 5 4 3 200 DOOR HEIGHT 300mm 2 DOOR HEIGHT 330mm 2 DOOR HEIGHT 360mm 2 DOOR HEIGHT 390mm 2 DOOR HEIGHT 540mm DOOR HEIGHT 600mm GAS PISTON Description Gas Piston Progressive 150N Gas Piston Progressive 250N Gas Piston Progressive 450N Item No. RS Code 1172 1172 1172 RIH1162 RIH1163 RIH1164 DH = Door Height 600mm Cabinet Width 900mm Cabinet Width 1200mm Cabinet Width PROGRESSIVE-OPERATION doors using ONE PISTON (1 arm only) The diagram below defines the exact strength (Newton "N") of the piston to be used in relationship with the dimensions and weight of the door. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 kg N 18 17 16 15 14 13 12 11 10 250 kg N 18 17 16 kg N 18 17 16 15 14 13 12 11 10 250 9 8 7 150 6 5 4 3 kg N 18 17 16 15 14 13 12 11 10 250 9 8 7 150 6 5 4 3 kg N 18 17 16 15 14 13 12 11 10 9 8 450 7 6 250 150 5 4 3 kg N PROGRESSIVE-OPERATION doors 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 kg N 18 17 450 16 15 14 13 12 250 11 10 9 150 8 7 6 5 4 3 kg N using TWO PISTONS (arm on each side) This diagram defines the exact strength (Newton "N") of the pistons to be used in relationship with the dimensions and weight of the door. It is suggested 450 15.2 15 14 13.4 450 13 12 11 10.4 10 250 9 8 7 150 6 5 4 3 250 9 8 7 150 6 5 4 3 that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. 150 250 150 DH 300mm DH 330mm DH 360mm DH 390mm DH 540mm DH 600mm DH 540mm DH 600mm 78 Proud distributor of hinges SALICE 8.7 Lift Systems - Single Flap Doors 8 Single Flap Door Installation Fixing the support to the cabinet side - a template is provided for easy drilling Deploying the piston Drilling pattern for the door 3 Internal cabinet side D ø 35 K=4 1 2 Fitting hinge to the door Fitting lift to the door 1) 176.5 4 5 Adjusting the opening angle of 12.8 D 32 DISASSEMBLY A) Press the clip of the mounting plate B) Then press firmly at this point Installing the Smove the door 6 Installing the Cover 7 A B 8 9 79 8 SALICE 8.8 Lift Systems - Folding Door Proud distributor of hinges Folding Door Double Flap General Information: The Gas Piston Strength on the arm is determined in relationship with the dimensions & weight of the doors. For a wall cabinet width 600mm, it is possible to use one system only left or right arm. Their are also two types of pistons available in the various strengths which determines how you want the action of the door to open, which are the following: ■ Standard Piston This piston is for a single operation door, when the door is opened, it opens fully to the top. ■ Progressive Piston This piston is a for a progressive opening door, when you open the door you open and close the door to the angle which you open the door. Correspond Piston strengths available in the stock program to determine the amount of arms needed as well as piston strength required on the graphs, a calculation CD is available on request. 10 min. Z 175 103 L 250 33 40 80 Proud distributor of hinges SALICE 8.8 Lift Systems - Folding Door Description Folding Door Left Arm Folding Door Right Arm (ordered with mounting plate for Door) (for the arm) Item No. 1168 1168 1174 RS Code RIH1155 RIH1156 RIH1167 8 Series 200 Clip on 110° FULL OVERLAY Hinge Description Series 200 Clip-on 110° F/O Hinge (use with Clip-on Mounting Plate) Series 200 Clip-on 110° F/O Hinge with Ø8x10 Dowel Item No. 1147 1178 1253 RS Code RIH1132 RIH1172 RIH1208 Mounting Plates (Slim shape) Description Clip-on Mounting Plate Clip-on Mounting Plate for Door Item No. RS Code 1178 1174 RIH1172 RIH1167 Smove for arms for doors up to 6kg in weight or up to 360mm in height Smove for arms for doors over 6kg in weight or over 360mm in height Description Smove for arms for doors up to 6kg in weight or up to 360mm in height Item No. RS Code 1173 RIH1165 Description Smove for arms for doors over 6kg in weight or over 360mm in height Item No. RS Code 1173 RIH1166 CENTRAL HINGE Description Central Hinge for Folding Door Item No. RS Code 1170 RIH1157 81 8 SALICE 8.8 Lift Systems - Folding Door GAS PISTON Proud distributor of hinges Description Gas Piston Standard Gas Piston Standard Gas Piston Standard Gas Piston Standard 200N 350N 450N 500N Item No. RS Code 1171 1171 1171 1171 1172 1172 1172 RIH1158 RIH1159 RIH1160 RIH1161 RIH1162 RIH1163 RIH1164 Gas Piston Progressive 150N Gas Piston Progressive 250N Gas Piston Progressive 450N SINGLE-OPERATION doors using ONE PISTON (one arm only, left or right, for 600mm width) SINGLE-OPERATION doors using TWO PISTONS (two arms for 900mm & 1200mm widths) The diagram below defines the exact strength (Newton "N") of the piston to be used in relation to the dimensions and weight of the door. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. 16 15 14 13 12 11 10 9 8 7 6 5 4 3 200 350 500 450 kg N 16 15 14 13 12 11 10 9 8 7 6 5 4 3 kg N 16 15 14 13 12 11 10 9 8 7 6 5 kg N 16 15 14 13 12 11 10 kg N 500 450 500 450 350 9 8 7 6 5 500 450 350 350 200 4 3 200 4 3 200 DH 600mm Combined DH 660mm Combined DH 720mm Combined DH 780mm Combined PROGRESSIVE-OPERATION doors using ONE PISTON (one arm only, left or right, for 600mm width) PROGRESSIVE-OPERATION doors using TWO PISTONS (two arms for 900mm & 1200mm widths) The PROGRESSIVE-OPERATION is an action that stops where the user releases the handle and does not open further in a single-action. The diagram below defines the exact strength (Newton "N") of the piston/s to be used in relation to the dimensions and weight of the doors. It is suggested that some assembly trials are made. Our technical Assistance Service is at your disposal for any additional information. 16 15 14 13 12 11 10 9 8 7 6 5 4 3 150 250 450 kg N 16 15 14 13 12 11 10 9 8 7 6 5 4 3 kg N kg 16 15 14 13 N 16 15 14 13 12 kg N 450 12 11 10 9 8 450 11 10 9 8 7 6 5 250 450 250 7 6 250 150 5 4 3 150 4 3 150 DH 600mm Combined DH 660mm Combined DH 720mm Combined DH 780mm Combined 82 Proud distributor of hinges SALICE 8.8 Lift Systems - Folding Door 8 Folding Door Installation Fix the support to the cabinet side 1 2 3 FITTING THE DOORS TO THE CABINET 11 ø 35 K=4 21 32 1 Upper door 6 Lower door 4 K=4 ø 35 7 1 11 INSTALLING THE COVER 5 12.8 D 32 192.5* Ø 35 K=4 8 83 8 SALICE Proud distributor of hinges 8.9 Lift Systems - Parallel Opening System Parallel Opening System for doors 440 to 660mm in height General Information: The Gas Piston Strength on the arm is determined in relationship with the dimensions & weight of the doors. Their are also two types of pistons available in the various strengths which determines how you want the action of the door to open, which are the following: ■ Standard Piston This piston is for a single operation door, when the door is opened, it opens fully to the top. ■ Progressive Piston This piston is a for a progressive opening door, when you open the door you open and close the door to the angle which you open the door. Description Lifting Sytem Left Arm Lifting System Right Arm (ordered with mounting plate for Door) (for the arm) Item No. 1824 1824 1174 RS Code RIH1824 RIH1825 RIH1167 Description Stabilising Bar sold in 3m lengths formula = Internal cabinet width -105mm Item No. RS Code 1825 RIH1826 Cut to size depending on your cabinet internal width, Ends & Sleeves sold seperately Description Stabilising Bar Ends inc. sleeve ( sold in pairs ) Item No. RS Code 1826 RIH1827 Description Smove for arms for doors up to 6kg in weight Item No. RS Code 1173 RIH1165 Smove for arms for doors up to 6kg in weight Smove for arms for doors over 6kg in weight Description Smove for arms for doors over 6kg in weight Item No. RS Code 1173 RIH1166 84 Proud distributor of hinges SALICE 8.9 Lift Systems - Parallel Opening System Description Gas Piston Standard Gas Piston Standard Gas Piston Standard Gas Piston Standard 200N 350N 450N 500N Item No. RS Code 1171 1171 1171 1171 RIH1158 RIH1159 RIH1160 RIH1161 8 GAS PISTON Chart for standard pistons with single-operation door opening. For doors from 440 to 660 mm height. Chart to define the exact strength of the pistons to be used in relationship with the dimensions and weight of the doors. Standard pistons are used when the door is required to open fully in a single operation. Door weight (Kg) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2 3 4 5 0.8 0.6 0.4 0.2 6 7 8 9 10 11 12 13 14 15 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 600 900 1200 Piston strength (N) 600 900 1200 200 250 300 350 400 450 500 550 600 Piston strength (N) 250 300 350 400 450 500 550 600 650 Door height 480 mm 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Door height 600 mm 2 3 4 5 0.8 0.6 0.4 0.2 6 7 8 9 10 11 12 13 14 15 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 600 900 1200 Piston strength (N) 600 900 1200 250 300 350 400 450 500 550 600 650 Piston strength (N) 250 300 350 400 450 500 550 600 650 Door height 540 mm Door height 660 mm GAS PISTON Description Gas Piston Progressive 150N Gas Piston Progressive 250N Gas Piston Progressive 450N Item No. RS Code 1172 1172 1172 RIH1162 RIH1163 RIH1164 Chart for progressive pistons with a progressive-operation door opening. For doors from 440 to 660 mm height. Chart to define the exact strength of the pistons to be used in relationship with the dimensions and weight of the doors. Progressive pistons operate progressively and allow the door to stop at any position in the opening cycle. Door weight (Kg) 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 600 900 1200 Piston strength (N) 600 900 1200 150 250 350 450 500 Piston strength (N) 250 350 450 550 650 Door height 480 mm 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Door height 600 mm 2 3 4 5 0.8 0.6 0.4 0.2 6 7 8 9 10 11 12 13 14 15 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 600 900 1200 Piston strength (N) 600 900 1200 250 350 450 550 600 Piston strength (N) 450 550 600 Door height 540 mm Door height 660 mm 85 8 SALICE Dimensions of the system 175 32.5 Proud distributor of hinges 8.9 Lift Systems - Parallel Opening System 149 36 200 375 380 min 45 min Fixing the support to the cabinet side D = Overlay Internal cabinet side 12 32 D 96 335 Hole for additional woodscrew for retaining lever Additional fix ing to be executed after adjustments 122 96 26 18.5 D NB! Full instructions available at www.raiel.com or on request 86 32 32 440 Proud distributor of hinges SALICE 8.10 Accessories 8 COVER CAP Description Series 200 Screw COVER CAP Series 800 Screw COVER CAP Item No. 1175 1175 RS Code RIH1168 RIH1169 Steel COVER CAP Description COVER CAP Item No. 1176 RS Code RIH1170 SMOVE 6SNG Description SMOVE 6SNG Item No. 1177 RS Code RIH1171 Insert Smove D006 at the centre of the top or the base panel of the cabinet. For wood-based and alu-framed doors over 1600 mm height, it may be necessary to use two Smove, one to be inserted into the top and the second into the base panel of the cabinet. Ø10 x 50mm Hole NB! *If you require any application other than what we offer standard in our stock range please contact our head office for enquiries. 87 9 MAPS 9.1 Raiël Maps Malmesbury (Head Office) 5 Municipality Street, Malmesbury 7300 • tel: 022 482 7400 • fax: 022 482 1496 • email:
[email protected] GPS: 33° 27’ 54.76”S • 18° 34’ 12.72”E Maitland (Cape Town) 60 Coronation Avenue, Corner Koeberg Road, Maitland • Tel: 021 510 2798 • Fax: 021 510 5839 GPS: 33° 55’ 21.78”S • 18° 25’ 50.91”E 1 2 3 4 Raiël Head Office Raiël Wood Alumi Jack Doors 4 Stikland (Bellville) 7A Cecil Morgan Way, Off La Belle Road, Stikland • tel: 021 944 5900 • fax: 021 944 5907 GPS: 33° 547’ 05.64”S • 18° 43’ 13.97”E Port Elizabeth Milenium Street, Northend, Port Elizabeth • tel: 041 487 0507 • fax: 041 487 0318 R7 5 Kramerville (Johannesburg) Unit 3, 17 Kramer Road, Kramerville • tel: 011 262 2516 • fax: 011 262 3459 GPS: 26° 05’ 20.91”S • 28° 05’ 05.97”E Durban Unit 3, Marseilles Park, Marseilles Crescent, Briardene • tel: 031 560 0900 • fax: 031 560 0901 SOUTH ROAD M1 ARCHIMEDES ST MARLBO RO DRIV E RAAF M OTORWA Y M1 88 D E VIL IE R S G T ND S DESMO APPEL ROAD KRA MER ROA D M60 Malmesbury|Head Office 5 Municipality Street Malmesbury 7300 South Africa tel: +27(0)22 482 7400 fax: +27(0)22 482 1496 Maitland (Cape Town) 60 Coronation Ave Cnr Koeberg Road, Maitland South Africa tel: +27(0)21 510 2798 fax: +27(0)21 510 5839 Stikland (Bellville) 7A Cecil Morgan Way Off La Belle Road, Stikland South Africa tel: +27(0)21 944 5900 fax: +27(0)21 944 5907 Port Elizabeth Milenium Street, North End Port Elizabeth 6001 South Africa tel: +27(0)41 487 0507 fax: +27(0)41 487 0318 Durban Unit 3, Marseilles Park Marseilles Cres, Briardene South Africa tel: +27(0)31 560 0900 fax: +27(0)31 560 0901 Johannesburg Unit 3, 17 Kramer Road Kramerville South Africa tel: +27(0)11 262 2516 fax: +27(0)11 262 3459 www • r a iel.c o m decorative hardware | mouldings | surfaces | organisers | accessories