Chapter 1 Overview ......................................................................................... 1.1 Preparations ........................................................................................... 1.2 Basic Procedures ................................................................................... Chapter 2 Network Check ............................................................................... 2.1 Check Network Communication ............................................................. 2.2 Check Network Attribute Configuration .................................................. 2.3 Check Client Software ............................................................................ 2.3.1 Check "M900 M1800 Client" .......................................................... 2.3.2 Check "M900 M1800 Maintenance" ............................................... 2.3.3 Check "M900 M1800 Alarm" .......................................................... Chapter 3 Hardware Commissioning ............................................................. 3.1 Related Concepts ................................................................................... 3.1.1 Loading .......................................................................................... 3.1.2 Loading Modes .............................................................................. 3.1.3 Load File List .................................................................................. 3.2 Basic Procedures of Hardware Commissioning ..................................... 3.3 Power-on/Loading Procedures ............................................................... 3.3.1 Preparations ................................................................................... 3.3.2 Power-on/Loading Sequence and Path ......................................... 3.3.3 Powering on AM Cabinet for Loading ............................................ 3.3.4 Powering on LIM Cabinet for Loading ............................................ 3.3.5 Powering on SRM Cabinet for Loading.......................................... 3.3.6 Powering on SPM Cabinet for Loading .......................................... 3.3.7 Parallel Loading ............................................................................. 3.4 Check Loading Effect ............................................................................. 3.4.1 Solutions to Inconsistent Foreground and Background Data......... 3.4.2 Checking Methods for Board Version Consistency between Foreground and Background .................................................................. 3.5 Important Points upon Loading .............................................................. 3.5.1 GCPC and GSPC Loading ............................................................. 3.5.2 Global Resource Loading .............................................................. 3.5.3 Path Loading .................................................................................. 3.6 Common Loading Problems and Solutions ............................................ 3.6.1 AMP, CDP or GSPC Loading Unsuccessful .................................. 3.6.2 GQSI/BCC Loading Unsuccessful ................................................. 3.6.3 GMHI Loading Successful but GSRC/GSPT Loading Unsuccessful ........................................................................................... 3.6.4 Loading Failure Caused by Lack of Basic Configuration Data ....... 1-1 1-1 1-1 2-1 2-1 2-1 2-2 2-2 2-2 2-3 3-1 3-1 3-1 3-2 3-4 3-5 3-5 3-5 3-6 3-8 3-9 3-9 3-11 3-11 3-12 3-12 3-14 3-15 3-15 3-15 3-16 3-16 3-16 3-16 3-17 3-17 3.6.5 Inconsistency between CDP Loading Program and Data Version .................................................................................................... 3.6.6 Cases about CDP Loading upon Upgrading .................................. Chapter 4 Trunk and Signaling Commissioning ........................................... 4.1 Basic Commissioning Procedures .......................................................... 4.2 Loading of Trunks and Signaling Data ................................................... 4.3 Commissioning of Trunk and Signaling in Local Office .......................... 4.4 Joint Commissioning of Trunks and Signaling ....................................... 4.4.1 Preparations prior to Joint Commissioning .................................... 4.4.2 Basic Procedures for Joint Commissioning ................................... 4.5 Troubleshooting in Trunk and Signaling Commissioning ....................... Chapter 5 Service Commissioning ................................................................ 5.1 Basic Procedures ................................................................................... 5.2 Data Loading .......................................................................................... 5.3 Service Test ........................................................................................... 5.3.1 Basic Service Dialing Test ............................................................. 5.4 Supplementary Service Verification ....................................................... 5.4.1 IN Service Verification .................................................................... 5.4.2 Handover Function Verification ...................................................... 5.5 Charging Verification .............................................................................. 5.5.1 Charging Gateway Verification ...................................................... 5.5.2 Bill Verification ............................................................................... 5.6 Troubleshooting in Service Commissioning ........................................... Chapter 6 Specified Trunk Commissioning .................................................. 6.1 Significance of Specified Trunk Test ...................................................... 6.2 Test Type and Dialing Scheme .............................................................. 6.3 Specified Trunk Test in VMSC ............................................................... 6.3.1 Specified Speech Test ................................................................... 6.3.2 Specified A Interface Circuit Test................................................... 6.3.3 Specified TUP Circuit Test ............................................................. 6.3.4 Specified ECP Channel Test ......................................................... 6.4 Specified Trunk Test of GMSC............................................................... 6.4.1 Special Test Call Prefix for Tandem to GMSC ............................... 6.4.2 Not Special Test Call Prefix for Tandem to GMSC ........................ Chapter 7 Equipment Preliminary Acceptance and Cutover ....................... 7.1 Equipment Preliminary Acceptance ....................................................... 7.2 Cutover ................................................................................................... Appendix A Upgrade Instruction .................................................................... 3-17 3-18 4-1 4-1 4-1 4-1 4-2 4-2 4-2 4-4 5-1 5-1 5-1 5-1 5-2 5-2 5-3 5-4 5-4 5-4 5-7 5-9 6-1 6-1 6-1 6-2 6-2 6-10 6-11 6-13 6-14 6-14 6-16 7-1 7-1 7-1 A-1 A.1 Setup/upgrade Tool ............................................................................... A.1.1 Path of Upgrade Tool .................................................................... A.1.2 Functions of Upgrade Tool ............................................................ A.1.3 Application Environment of Upgrade Tool ..................................... A.2 Upgrade BAM Software with Setup/Upgrade Tool................................. A.2.1 Preparations .................................................................................. A.2.2 BAM Software Upgrade Procedures ............................................. A.2.3 Handle BAM Software Upgrade Failure ........................................ A.3 Host Upgrade Instruction ....................................................................... A.3.1 Preparations .................................................................................. A.3.2 Upgrade Process ........................................................................... A.3.3 Fallback Process ........................................................................... Appendix B Patch Operations ........................................................................ B.1 Patch Operations on Host System ......................................................... B.1.1 Functions of Host Patches ............................................................. B.1.2 Host Patch Features ...................................................................... B.1.3 Host Patch Status .......................................................................... B.1.4 Host Patch Operation Commands ................................................. B.1.5 Host Patch Operation Procedures ................................................. B.2 Cautions for Patch Operations ............................................................... Appendix C Online Expansion ....................................................................... C.1 Expansion Modes and Configuration Instructions ................................. C.1.1 LIM Module Expansion Principle ................................................... C.1.2 SPM Expansion Principle .............................................................. C.1.3 SRM Expansion Principle .............................................................. C.2 LIM Module Expansion Process ............................................................ C.2.1 Add GE16 and GECS Board ......................................................... C.2.2 Add LIM Frame.............................................................................. C.3 SPM Module Expansion Process .......................................................... C.3.1 Add GCPC Board .......................................................................... C.3.2 Add GVDP Board .......................................................................... C.3.3 Add SPM Frame ............................................................................ C.4 SRM Module Expansion Process .......................................................... C.4.1 Add GSRC Board .......................................................................... C.4.2 Add GSPT Board........................................................................... Appendix D Abbreviations and Acronyms .................................................... A-1 A-1 A-2 A-2 A-2 A-3 A-6 A-11 A-13 A-13 A-14 A-15 B-1 B-1 B-1 B-1 B-2 B-3 B-4 B-8 C-1 C-1 C-1 C-3 C-3 C-3 C-3 C-4 C-4 C-4 C-5 C-5 C-6 C-6 C-6 D-1 HUAWEI M900/M1800 MSC/SSP/IP Installation Manual - System Commissioning V610 M900/M1800 MSC/SSP/IP Installation Manual Volume Manual Version Product Version BOM System Commissioning T2-030443-20040110-C-6.21 V610 31040843 Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. Please feel free to contact our local office or company headquarters. Huawei Technologies Co., Ltd. Address: Administration Building, Huawei Technologies Co., Ltd., Bantian, Longgang District, Shenzhen, P. R. China Postal Code: 518129 Website: http://www.huawei.com Email:
[email protected] Copyright © 2004 Huawei Technologies Co., Ltd. All Rights Reserved No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks , HUAWEI, C&C08, EAST8000, HONET, , ViewPoint, INtess, ETS, DMC, TELLIN, InfoLink, Netkey, Quidway, SYNLOCK, Radium, M900/M1800, TELESIGHT, Quidview, Musa, Airbridge, Tellwin, Inmedia, VRP, DOPRA, iTELLIN, HUAWEI OptiX, C&C08 iNET, NETENGINE, OptiX, iSite, U-SYS, iMUSE, OpenEye, Lansway, SmartAX, infoX, TopEng are trademarks of Huawei Technologies Co., Ltd. All other trademarks mentioned in this manual are the property of their respective holders. Notice The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute the warranty of any kind, express or implied. About This Manual Release Notes This manual applies to M900/M1800 MSC/SSP/IP V610. Organization This manual introduces the tests, commissoning methods and checks carried out for the system after the hardware and software installation. It consists of the following sections: Chapter 1 Overview It briefs the preparations and basic procedures for system commissioning. Chapter 2 Network Check It covers network communication check, network attribute configuration check, and client software check. Chapter 3 Hardware Commissioning It covers hardware data configuration, board power-on and loading, board operation check, and hardware data configuration check. Chapter 4 Trunk and Signaling Commissioning This part introduces the interconnection of the trunks and signaling interworking between the local office and the transmission/peer office, and the methods to check the connection and configuration of inter-MSC trunks and signaling. Chapter 5 Service Commissioning This part describes the commissioning methods of basic services and intelligent services, and the ways to check the system’s ability to provide services and the system’s charging function. Chapter 6 Specified Trunk Commissioning This part introduces the method of commissioning specified trunk by extracting 1 or 2 timeslots in each E1 system in a office direction. Chapter 7 Equipment Preliminary Acceptance and Cutover This party gives the contents of preliminary acceptance before the cutover and points for attention during the system cutover. Appendix A Upgrade Instruction It gives the instructions on upgrading a BAM server software and Host software. Appendix B Patch Operations This part introduces the basic concepts and methods of patching operations, along with the functions, features, status, commands and operation steps of patches. Appendix C Online Expansion It describes the capacity expansion methods of LIM, SPM and SRM. Appendix D Abbreviations and Acronyms Intended Audience The manual is intended for the following readers: Operator of the report system Telecommunications management personnel Intelligent network system engineers Conventions The manual uses the following conventions: I. General conventions Convention Arial Arial Narrow Boldface Courier New Description Normal paragraphs are in Arial. Warnings, Cautions, Notes and Tips are in Arial Narrow. Headings are in Boldface. Terminal Display is in Courier New. II. Command conventions Convention Boldface italic [] { x | y | ... } [ x | y | ... ] { x | y | ... } * [ x | y | ... ] * Description The keywords of a command line are in Boldface. Command arguments are in italic. Items (keywords or arguments) in square brackets [ ] are optional. Alternative items are grouped in braces and separated by vertical bars. One is selected. Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected. Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected. Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected. III. GUI conventions Convention [] / Description Button names are inside angle brackets. For example, click the button. Window names, menu items, data table and field names are inside square brackets. For example, pop up the [New User] window. Multi-level menus are separated by forward slashes. For example, [File/Create/Folder]. IV. Keyboard operation Format Description Press the key with the key name inside angle brackets. For example, , , , or . Press the keys concurrently. For example, means the three keys should be pressed concurrently. Press the keys in turn. For example, means the two keys should be pressed in turn. V. Mouse operation Action Click Double Click Drag Description Press the left button or right button quickly (left button by default). Press the left button twice continuously and quickly. Press and hold the left button and drag it to a certain position. VI. Symbols Eye-catching symbols are also used in the manual to highlight the points worthy of special attention during the operation. They are defined as follows: Caution, Warning, Danger: Means reader be extremely careful during the operation. Note, Comment, Tip, Knowhow, Thought: Means a complementary description. Environmental Protection This product has been designed to comply with the requirements on environmental protection. For the proper storage, use and disposal of this product, national laws and regulations must be observed. Installation Manual - System Commissioning M900/M1800 MSC/SSP/IP Table of Contents Table of Contents Chapter 1 Overview ....................................................................................................................... 1-1 1.1 Preparations....................................................................................................................... 1-1 1.2 Basic Procedures............................................................................................................... 1-1 Chapter 2 Network Check............................................................................................................. 2-1 2.1 Check Network Communication ........................................................................................ 2-1 2.2 Check Network Attribute Configuration ............................................................................. 2-1 2.3 Check Client Software ....................................................................................................... 2-2 2.3.1 Check "M900 M1800 Client" ................................................................................... 2-2 2.3.2 Check "M900 M1800 Maintenance"........................................................................ 2-2 2.3.3 Check "M900 M1800 Alarm" ................................................................................... 2-3 Chapter 3 Hardware Commissioning .......................................................................................... 3-1 3.1 Related Concepts .............................................................................................................. 3-1 3.1.1 Loading.................................................................................................................... 3-1 3.1.2 Loading Modes........................................................................................................ 3-2 3.1.3 Load File List ........................................................................................................... 3-4 3.2 Basic Procedures of Hardware Commissioning ................................................................ 3-5 3.3 Power-on/Loading Procedures .......................................................................................... 3-5 3.3.1 Preparations ............................................................................................................ 3-5 3.3.2 Power-on/Loading Sequence and Path .................................................................. 3-6 3.3.3 Powering on AM Cabinet for Loading ..................................................................... 3-8 3.3.4 Powering on LIM Cabinet for Loading..................................................................... 3-9 3.3.5 Powering on SRM Cabinet for Loading................................................................... 3-9 3.3.6 Powering on SPM Cabinet for Loading................................................................. 3-11 3.3.7 Parallel Loading..................................................................................................... 3-11 3.4 Check Loading Effect....................................................................................................... 3-12 3.4.1 Solutions to Inconsistent Foreground and Background Data ............................... 3-12 3.4.2 Checking Methods for Board Version Consistency between Foreground and Background .................................................................................................................... 3-14 3.5 Important Points upon Loading........................................................................................ 3-15 3.5.1 GCPC and GSPC Loading.................................................................................... 3-15 3.5.2 Global Resource Loading...................................................................................... 3-15 3.5.3 Path Loading ......................................................................................................... 3-16 3.6 Common Loading Problems and Solutions ..................................................................... 3-16 3.6.1 AMP, CDP or GSPC Loading Unsuccessful ......................................................... 3-16 3.6.2 GQSI/BCC Loading Unsuccessful ........................................................................ 3-16 3.6.3 GMHI Loading Successful but GSRC/GSPT Loading Unsuccessful.................... 3-17 3.6.4 Loading Failure Caused by Lack of Basic Configuration Data ............................. 3-17 i Installation Manual - System Commissioning M900/M1800 MSC/SSP/IP Table of Contents 3.6.5 Inconsistency between CDP Loading Program and Data Version ....................... 3-17 3.6.6 Cases about CDP Loading upon Upgrading......................................................... 3-18 Chapter 4 Trunk and Signaling Commissioning ........................................................................ 4-1 4.1 Basic Commissioning Procedures ..................................................................................... 4-1 4.2 Loading of Trunks and Signaling Data .............................................................................. 4-1 4.3 Commissioning of Trunk and Signaling in Local Office ..................................................... 4-1 4.4 Joint Commissioning of Trunks and Signaling................................................................... 4-2 4.4.1 Preparations prior to Joint Commissioning ............................................................. 4-2 4.4.2 Basic Procedures for Joint Commissioning ............................................................ 4-2 4.5 Troubleshooting in Trunk and Signaling Commissioning .................................................. 4-4 Chapter 5 Service Commissioning .............................................................................................. 5-1 5.1 Basic Procedures............................................................................................................... 5-1 5.2 Data Loading...................................................................................................................... 5-1 5.3 Service Test ....................................................................................................................... 5-1 5.3.1 Basic Service Dialing Test ...................................................................................... 5-2 5.4 Supplementary Service Verification................................................................................... 5-2 5.4.1 IN Service Verification............................................................................................. 5-3 5.4.2 Handover Function Verification ............................................................................... 5-4 5.5 Charging Verification ......................................................................................................... 5-4 5.5.1 Charging Gateway Verification................................................................................ 5-4 5.5.2 Bill Verification......................................................................................................... 5-7 5.6 Troubleshooting in Service Commissioning ...................................................................... 5-9 Chapter 6 Specified Trunk Commissioning................................................................................ 6-1 6.1 Significance of Specified Trunk Test ................................................................................. 6-1 6.2 Test Type and Dialing Scheme.......................................................................................... 6-1 6.3 Specified Trunk Test in VMSC........................................................................................... 6-2 6.3.1 Specified Speech Test ............................................................................................ 6-2 6.3.2 Specified A Interface Circuit Test.......................................................................... 6-10 6.3.3 Specified TUP Circuit Test .................................................................................... 6-11 6.3.4 Specified ECP Channel Test................................................................................. 6-13 6.4 Specified Trunk Test of GMSC ........................................................................................ 6-14 6.4.1 Special Test Call Prefix for Tandem to GMSC...................................................... 6-14 6.4.2 Not Special Test Call Prefix for Tandem to GMSC ............................................... 6-16 Chapter 7 Equipment Preliminary Acceptance and Cutover .................................................... 7-1 7.1 Equipment Preliminary Acceptance................................................................................... 7-1 7.2 Cutover .............................................................................................................................. 7-1 Appendix A Upgrade Instruction .................................................................................................A-1 A.1 Setup/upgrade Tool...........................................................................................................A-1 A.1.1 Path of Upgrade Tool..............................................................................................A-1 A.1.2 Functions of Upgrade Tool .....................................................................................A-2 A.1.3 Application Environment of Upgrade Tool ..............................................................A-2 ii Installation Manual - System Commissioning M900/M1800 MSC/SSP/IP Table of Contents A.2 Upgrade BAM Software with Setup/Upgrade Tool............................................................A-2 A.2.1 Preparations............................................................................................................A-3 A.2.2 BAM Software Upgrade Procedures.......................................................................A-6 A.2.3 Handle BAM Software Upgrade Failure ...............................................................A-11 A.3 Host Upgrade Instruction.................................................................................................A-13 A.3.1 Preparations..........................................................................................................A-13 A.3.2 Upgrade Process ..................................................................................................A-14 A.3.3 Fallback Process ..................................................................................................A-15 Appendix B Patch Operations......................................................................................................B-1 B.1 Patch Operations on Host System ....................................................................................B-1 B.1.1 Functions of Host Patches......................................................................................B-1 B.1.2 Host Patch Features ...............................................................................................B-1 B.1.3 Host Patch Status ...................................................................................................B-2 B.1.4 Host Patch Operation Commands ..........................................................................B-3 B.1.5 Host Patch Operation Procedures ..........................................................................B-4 B.2 Cautions for Patch Operations ..........................................................................................B-8 Appendix C Online Expansion .....................................................................................................C-1 C.1 Expansion Modes and Configuration Instructions.............................................................C-1 C.1.1 LIM Module Expansion Principle ............................................................................C-1 C.1.2 SPM Expansion Principle .......................................................................................C-3 C.1.3 SRM Expansion Principle .......................................................................................C-3 C.2 LIM Module Expansion Process........................................................................................C-3 C.2.1 Add GE16 and GECS Board ..................................................................................C-3 C.2.2 Add LIM Frame .......................................................................................................C-4 C.3 SPM Module Expansion Process......................................................................................C-4 C.3.1 Add GCPC Board ...................................................................................................C-4 C.3.2 Add GVDP Board ...................................................................................................C-5 C.3.3 Add SPM Frame .....................................................................................................C-5 C.4 SRM Module Expansion Process......................................................................................C-6 C.4.1 Add GSRC Board ...................................................................................................C-6 C.4.2 Add GSPT Board ....................................................................................................C-6 Appendix D Abbreviations and Acronyms .................................................................................D-1 iii Installation Manual - System Commissioning M900/M1800 MSC/SSP/IP Chapter 1 Overview Chapter 1 Overview 1.1 Preparations System commissioning is a series of tests and checks carried out for the system after the hardware and software installation, so as to ensure that the system can meet the design requirements and operate stably, reliably and safely. System commissioning is the most important and complicated part of the office deployment process. Preparation work must be checked item by item in strict compliance with the regulations before the system commissioning to avoid any unexpected problem that might arise in the process. The following requirements should be met for system commissioning: The hardware installation has been checked to be in good condition and compliant with the acceptance standards; The power supply of each frame is in good condition with a normal voltage range; The board trial power-on check is successful with status of each power supply board being normal; O&M software (including that of BAM, iGWB, operation terminal and OMC) is running normally. The software versions are correct. And the network communication is normal. 1.2 Basic Procedures Due to its complexity, the system commissioning process can be divided into the following seven steps: I. Network Check It covers network communication check, network attribute configuration check, and client software check. II. Hardware Commissioning The contents include hardware data configuration, board power-on and loading, board operation check, and hardware data configuration check. 1-1 Installation Manual - System Commissioning M900/M1800 MSC/SSP/IP Chapter 1 Overview III. Trunk and Signaling Commissioning The contents include the interconnection of the trunks and signaling between the local office and the transmission/peer office, and check of the connection and configuration of inter-MSC trunks and signaling. IV. Service Commissioning The contents include commissioning of all basic services and intelligent services provided by the system, check of the system’s ability to normally provide services, and check of the system’s charging function, etc. V. Specified Trunk Commissioning Extract 1 or 2 timeslots for each E1 system on this office direction for specified trunk test, without commissioning the peer office. The purpose is to test the availability of such physical channels as trunk circuit, A interface circuit, ToneID, speech channel, voice file, IWF channel, and ECP channel. VI. Preliminary Acceptance of Project It refers to the preliminary acceptance made with the office party personnel present before the cutover i.e. after the service commissioning is completed. This work should be done as per the checklists and operation guides comprised in M900/M1800 MSC/SSP/IP Acceptance Manual based on the actual conditions of MSC. Before the formal acceptance, the project supervisor should arrange an acceptance carried out by the company alone. VII. Cutover After the project preliminary acceptance, the project supervisor should cooperate with the customer in the formulation of a detailed cutover scheme and the further implementation. In the process of the cutover, use such means as traffic measurement to observe the equipment operation and solve any possible problems following the cutover in time. Note: Operation procedures for system upgrading, patching and online expansion are available in the Appendix of this manual. 1-2 Installation Manual - System Commissioning M900/M1800 MSC/SSP/IP Chapter 2 Network Check Chapter 2 Network Check 2.1 Check Network Communication The following two methods can be used to check whether the network communication on the workstation is normal (The second method is recommended): Open the window [Network Neighbours] and check whether other computers can be viewed. If they are visible, the network communication is normal, otherwise it is abnormal. This method cannot guarantee that the communication between WS and BAM is normal one hundred percent, because BAM may not be able to keep normal communication with the LAN where the WS is located. In the DOS mode run command "Ping 172.20.200.200" (Suppose it is the IP address of the first network adapter of BAM). If the return information is "Reply from 172.20.200.200: byte=32 time