ECP VST P MET ET 006 Piping Material Specification

April 30, 2018 | Author: Anonymous | Category: Documents
Share
Report this link


Description

PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 RELACIÓN DE VERSIONES Este documento es propiedad de ECOPETROL S.A. no debe ser copiado, reproducido y/o circulado sin su autorización This document is property of ECOPETROL S.A. it shall not be copied, reproduced and/or circulated without authorization ECP-VST-G-GEN-FT-001 1/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 TABLA DE CONTENIDO Página 1.  OBJETO ............................................................................................................................................................................... 3  2.  ALCANCE ............................................................................................................................................................................ 3  3.  GLOSARIO .......................................................................................................................................................................... 3  4.  DOCUMENTOS DEROGADOS ........................................................................................................................................... 4  5.  REFERENCIAS NORMATIVAS ........................................................................................................................................... 4  6.  CONDICIONES GENERALES ............................................................................................................................................. 6  6.1.  DEFICIÓN DE CODIFICACIÓN PIPING CLASS............................................................................................................ 6  6.1.1.  Identificación de las Clases de Tubería “Piping Class” ............................................................................................ 6  7.  DESARROLLO .................................................................................................................................................................. 10  7.1.  BASES DE DISEÑO ..................................................................................................................................................... 10  7.1.1.  Aspectos generales. ................................................................................................................................................... 10  7.2.  TAG PARA MATERIALES DE PIPING CLASS ........................................................................................................... 10  7.2.1.  Válvulas ....................................................................................................................................................................... 10  7.2.2.  Tubería ......................................................................................................................................................................... 14  7.2.3.  Bridas ........................................................................................................................................................................... 14  7.2.4.  Accesorios ................................................................................................................................................................... 14  7.2.5.  Pernos, Esparragos y Tuercas .................................................................................................................................. 15  7.2.6.  Empaques .................................................................................................................................................................... 15  7.2.7.  Derivación de Conexiones ......................................................................................................................................... 15  7.3.  LISTADO DE FLUIDOS................................................................................................................................................ 16  7.4.  DESCRIPCION DE CLASES DE TUBERIA ................................................................................................................. 23  8.  REGISTROS ...................................................................................................................................................................... 23  9.  CONTINGENCIAS.............................................................................................................................................................. 23  10. BIBLIOGRAFÍA .................................................................................................................................................................. 23  11. ANEXOS ............................................................................................................................................................................ 23  ECP-VST-G-GEN-FT-001 2/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 1. OBJETO Esta especificación establece los criterios de diseño para el uso de las clases de tubería, para los proyectos de ECOPETROL S.A. 2. ALCANCE Este documento contiene los requerimientos específicos para la selección de los materiales que serán usados en cuanto a la calidad, el diseño y la construcción de las tuberías. Está especificación aplica para todas las clases de tubería, adaptables a cada fluido de proceso específico y de acuerdo con los límites de diseño, presión y temperatura. El término tubería, hace referencia a tuberías, válvulas y accesorios de tubería. Materiales equivalentes y/o superiores a los especificados en las clases de tubería, podrán ser sustituidos con la aprobación de ECOPETROL S.A., y/o su Representante. 3. GLOSARIO AL: Aluminum (Aluminio) RF: Raised Face (Cara Resaltada) BB: Bolted Bonnet (Bonete Pernado) RB: Reduced Bore (Obturación Reducida) BC: Bolted Cover (Tapa Pernada) RP: Regular Port (Puerto Común) BE: Beveled End (Extremos Biselados) RTJ: Ring Type Joint (Junta Tipo Anillo) BW: Butt Welded End (Extremos Soldados) SCH: Schedule (Cedula) CS: Carbon Steel (Acero Al Carbono) SMLS: Seamless (Sin Costura) ERW: Electric Resistance Welded (Soldado Por Resistencia Eléctrica) SPW: Spiral Wound ( Envuelto en Espiral) SS: Stainless Steel (Acero Inoxidable) FB: Full Bore (Obturación completa) STD: Standard (Estandar) ECP-VST-G-GEN-FT-001 3/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 GO: Gear Operated (Operado con Engranaje) SW: Socket Weld (Para soldar a enchufe) HWO: Handle wheel Operator (Operada Volante Manual) T&C: Threaded & Coupled (Roscado y con Unión) THD: Threaded (Roscado) LR: Long Radius. (Radio Largo) TBE: Threaded Both End (Ambos Extremos Roscados) LO: Lever Operator (Operador Nivelado) TOE: Threaded One End (Un Extremo Roscado) NPT: National Standard Pipe Thread (Rosca Estandar Para Tuberia) WN: Welding Neck (Cuello Soldable) WT.: Wall Thickness (Espesor de Pared) OS&Y: Outside Screw & Yoke WGT.: Weight (Peso) PE: Plain End (Extremos Planos) 4. DOCUMENTOS DEROGADOS 1703-002-00-14-0-ET-001 CRITERIOS DE DISEÑO – CLASES DE TUBERÍA. PIPING CLASS VIT. 5. REFERENCIAS NORMATIVAS American Society of Mechanical Engineers (ASME): ASME B31.1 Power Piping ASME B31.3 Process Piping ASME B31.4 Pipe Line Transportation Systems for Fluid Hydrocarbons and Other Liquids ASME B31.8 Gas Transmission and Distribution Piping Systems ASME B36.10 Welded and Seamless Wrought Steel Pipe ASME B36.19 Stainless Steel Pipe ASME B16.1 Cast Iron Pipe Flanges and Flanged Fittings ASME B16.3 Malleable Iron Threaded Fittings ECP-VST-G-GEN-FT-001 4/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 ASME B16.5 Pipe Flanges and Flanged Fittings ASME B16.9 Factory-Made Wrought Steel Butt welding Fittings ASME B16.10 Face-to-Face and End to End Dimensions of Valves ASME B16.11 Forged Fittings, Socket-Welding and Threaded ASME B16.12 Cast Iron Threaded Drainage Fittings ASME B16.20 Metallic Gaskets for Pipe Flanges – Ring joint, Spiral Wound and Jacketed ASME B16.21 Nonmetallic Flat Gaskets for Pipe Flanges ASME B16.24 Bronze Pipe Flanges and Flanged Fittings ASME B16.25 Butt-Welding Ends ASME B16.34 Valves - Flanged, Threaded, and Welding End ASME B16.36 Orifice Flanges ASME B16.39 Malleable Iron Threaded Pipe Unions ASME B16.42 Ductile Iron Pipe Flanges and Flanged Fittings ASME B16.47 Large Diameter Steel Flanges NPS 26 through NPS 60 ASME B46.1 Surface Texture ASME B1.20.1 Pipe Threads, General Purpose ASME Sec. II Materials Specification ASME Sec. V Non-destructive examination ASME Sec. IX Welding and brazing qualifications Manufacturers Standardization Society of the Valve and Fittings Industry (MSS): MSS-SP-25 Standard Marking System for Valves, Fittings, Flanges and Unions MSS-SP-43 Wrought Stainless Steel Butt-Welding Fittings MSS-SP-44 Steel Pipeline Flanges MSS-SP-67 Butterfly Valves MSS-SP-70 Cast Iron Gate Valves, Flanged and Threaded Ends MSS-SP-71 Gray Iron Swing Check Valves, Flanged and Threaded Ends MSS-SP-72 Ball Valves with Flanged or Butt-Welding Ends for General Service MSS-SP-78 Cast Iron Plug Valves, Flanged and Threaded Ends ECP-VST-G-GEN-FT-001 5/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 MSS-SP-80 Bronze gate, Globe, Angle and Check Valves MSS-SP-81 Stainless Steel, Bonnetless, Flanged Knife Gate Valves MSS-SP-85 Cast Iron Globe and Angle Valves, Flanged and Threaded Ends MSS-SP-88 Diaphragm Type Valves MSS-SP-79 Socket-Welding Reducer Inserts MSS-SP-97 Forged Carbon Steel Branch Outlet Fittings - Socket Welding, Threaded, and Butt-Welding Ends MSS-SP-110 Ball Valves Threaded, Socket-Welding , Solder Joint, Grooved and Flare Ends American Society for Testing and Materials (ASTM) American Petroleum Institute (API): API 6FA Fire Test for Valves. API 6A Specification for Wellhead and Christmas Tree Equipment, API 17D Subsea Wellhead And Christmas Treee Equipment API 6FD Fire Test for Check Valves API RP-591 Process Valve Qualification Procedure API STD 594 Check Valves, Wafer, Wafer-lug and Double Flanged Type API STD 598 Valve Inspection and Testing API STD 599 Metal Plug Valves - Flanged, Threaded and Welding End API STD 600 Bolted Bonnet Steel Gate Valves for Petroleum and Natural Gas Industries API STD 602 Compact Steel Gate Valves - Flanged, Threaded, Welding and Extended Body Ends API STD 603 Corrosion-Resistant, Bolted Bonnet Gate Valves–Flanged and Butt-Welding Ends API STD 608 Metal Ball Valves - Flanged, Threaded and Butt-Welding Ends API STD 609 Butterfly Valves – Double Flanged, Lug and Wafer-Type Asociación Nacional de Ingenieros de la Corrosión NACE: Materials Requirements - Sulfide Stress Cracking Resistant Metallic Materials for Oil Field Equipment 6. CONDICIONES GENERALES 6.1. DEFICIÓN DE CODIFICACIÓN PIPING CLASS 6.1.1. Identificación de las Clases de Tubería “Piping Class” ECP-VST-G-GEN-FT-001 6/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 La identificación de tuberías corresponde a lo siguiente: 1er campo XX 2do campo # 3er Campo X 4to Campo # 5to Campo X 6to Campo ## En donde: 1er Campo: Designación del Material 2do Campo: ASME Rating 3er Campo: Tipo de conexión 4to Campo: Tolerancia de Corrosión 5to Campo: Código de diseño 6to Campo: Consecutivo de Proyecto • 1er Campo: Designación del Material Tabla 1. Designación del Material Campo Material Especificación de Material AA Aceros Carbono Gr. B, Verificar ASME Sec. IX Grupo P o S y de acuerdo ASME II API 5L. ASTM A 106 GR B AB Aceros Carbono alta resistencia 42,000 psi en adelante Verificar ASME Sec. IX Grupo P o S y de acuerdo ASME II API 5L AC Aceros Carbono Gr. B, Killed, high temperature ASTM A 381 AD Aceros Carbono Baja temperatura (-50°F PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 CF Acero Inoxidable TP 347 ASTM A-312 TP 347 CG Acero Inoxidable TP 317L ASTM A-312 TP 317L CH Acero Inoxidable TP 304H ASTM A-312 TP 304H CI 6 Mo UNS N-08367 CJ DUPLEX UNS S-31803 CK SUPER DUPLEX CL Acero Inoxidable SX ASTM A-312-SX CM Alloy 20 (Carpenter 20 SS) ASTM B-464, B729 DA FRP FRP DB CPVC CPVC DC PVC PVC DE HDPE DF PTFE DG Aluminio Aluminio La especificación ASTM de los materiales corresponde a la utilizada por ECOPETROL S.A. Variaciones a los materiales pueden realizarse con la aprobación de ECOPETROL S.A. Para servicios en refinación y petroquímica tubería de diámetros mayores a 24” en acero carbón y mayores o iguales a 8” en acero inoxidable pueden ser Welded Pipe EFW y 100% RT o UT. • 2do Campo: Clase ASME Rating / API Tabla 2. Clase ASME Rating / API Campo Class 1 ASME Rating Class 150 2 ASME Rating Class 300 3 ASME Rating Class 600 4 ASME Rating Class 900 5 ASME Rating Class 1500 6 ASME Rating Class 2500 8 ASME Rating Class 20000 9 ASME Rating Class 60000 10 API 5000 11 API 10000 12 API 15000 ECP-VST-G-GEN-FT-001 8/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 • 3er Campo: Tipo de Conexiones Principales Tabla 3 Tipo de conexiones principales Campo Descripción A Raised Face (RF) B Ring Joint (RTJ) C Flat Face (FF) D Clamp Style Hub End Connectors (e.g. Grayloc) E Socketweld (SW) F Threaded NPT G Compact Flanges (e.g. Taperlok) Special • 4to Campo: Sobre Espesor por Corrosión Tabla 4. Sobre espesor por Corrosión Campo Sobre-espesor para una vida de 20 años1 0 0.00 a 0.01” (1/100”) 1 0.03125” (1/32”) 2 0.0625” (1/16”) 3 0.125” (1/8”) 4 0.1875” (3/16”) 5 0.25” (1/4”) • 5to Campo: Código de diseño Tabla 5. Código de diseño Campo Descripción 1 ASME B31.8 2 ASME B31.4 3 ASME B31,3 4 ASME B31.1 • 6to Campo: Consecutivo de Proyecto 1 El sobre espesor es de acuerdo al listado de fluidos y su aplicación. ECP-VST-G-GEN-FT-001 9/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 Asignar numeración para uso de una clase específica dentro de un proyecto donde se realicen variaciones a la clase. Para servicios especiales en las notas de la clase se debe agregar la descripción registrada en la siguiente tabla. Tabla 6. Consecutivo de Proyecto Descripción Sin Requerimientos Especiales Adaptación Especial Mejorado para resistir el “Sulfide Stress Cracking” (Sour Service) Hydrogen Service Lethal Service Underground CPVC + Cast Iron Valves Revestimiento Interno - Polipropileno Revestimiento Interno – Teflón FRP Para Soda Cáustica Jacketed Pipe Tracing Tubing 7. DESARROLLO 7.1. BASES DE DISEÑO 7.1.1. Aspectos generales. • Factor de Diseño de acuerdo a Código: Tabla 7. Factor de diseño de acuerdo a código Campo Descripción 1 ASME B31.8 ( De acuerdo al Código) 2 ASME B31.4 (0.72, 0.65, 0.6 y 0.5) de acuerdo a evaluación de riesgos. La utilización debe estar con previa autorización de Ecopetrol. • Temperatura de Diseño: La temperatura máxima es de 1500°F y la temperatura mínimas es de -155 °F 7.2. TAG PARA MATERIALES DE PIPING CLASS 7.2.1. Válvulas ECP-VST-G-GEN-FT-001 10/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 Tabla 8. Tag de identificación de Válvulas TAG de identificación Valves shall be tagged and identified on all drawings as follows: Ejemplo: GA02A0B1C XX ## X # X # XX 1. Tipo de válvula 2. Rating 3. Tipo de conexión 4. Material del Cuerpo 5. Material del Trim 6. Port 7. Consecutivo para Condiciones especificas • 1er Campo: Tipo de Válvula Tabla 9. Tipo de Válvula TIPO DE VÁLVULA GA Compuerta (Gate) BA Bola (Ball) PL Tapón (Plug) GL Globo (Globe) CK Cheque Swing (Check) CW Cheque Wafer (Check) CL Cheque Lift (Check) CT Cheque Tilting Disc (Check) NE Aguja (Needle) BT Mariposa (Butterfly) DI Diafragma (Diaphragm) MA Manifold MF Monoflange ECP-VST-G-GEN-FT-001 11/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 • 2do Campo: Rating Tabla 10. Rating Campo Class 01. ASME Rating Class 150 02. ASME Rating Class 300 03. ASME Rating Class 600 04. ASME Rating Class 8002 05. ASME Rating Class 900 06. ASME Rating Class 1500 07. ASME Rating Class 2500 08. ASME Rating Class 4500 09. API 5000 10. API 10000 11. API 15000 12. 2500 psi3 13. 3000 psi4 14. 5000 psi5 15. 6000 psi6 • 3er Campo: Tipo de Conexión Tabla 11. Tipo de Conexión Campo Descripción A Raised Face B Ring Joint C Flat Face D Clamp Style Hub End Connectors (e.g. Grayloc) E Buttweld F Socketweld G Plain end H Threaded NPT I Compact Flanges (e.g. Taperlok) Special • 4to Campo: Material del Cuerpo 2 Usualmente para válvulas (no incluye bola) SW, THRD en clases ANSI 150, 300 y 600. Se utiliza esta clase. 3 Usualmente para Válvulas de Bola SW, THRD en clases ANSI 150, 300 y 600. Se utiliza esta designación 4 Usualmente para Válvulas manifold PE, SW, THRD en clases ANSI 150, 300 y 600. Se utiliza esta designación 5 Usualmente para Válvulas de Bola SW, THRD en clases ANSI 900, 1500. Se utiliza esta designación 6 Usualmente para Válvulas manifold PE, SW, THRD en clases ANSI 900, 1500. Se utiliza esta designación ECP-VST-G-GEN-FT-001 12/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 Los materiales deben ser de acuerdo a ASME B16.34 Tabla 12. Material del Cuerpo Campo Descripción 0 Carbón steel 1 Carbón steel (Low Tem) 2 Cast Iron 3 Ductile Iron 4 Aceros aleados 5 Aceros Inoxidables 6 Bronze 7 Otros • 5to Campo: Materiales Internos Tabla 13. Materiales Internos Campo Descripción APLICACIÓN A API TRIM 1 Para válvulas contacto metal-metal de acuerdo a API 600 o API 602 B API TRIM 8 Para válvulas contacto metal-metal de acuerdo a API 600 o API 602 C API TRIM 10 Para válvulas contacto metal-metal de acuerdo a API 600 o API 602 D API TRIM 12 Para válvulas contacto metal-metal de acuerdo a API 600 o API 602 E API TRIM 5 Para válvulas contacto metal-metal de acuerdo a API 600 o API 602 F CS ENP (Electro Niquel Plate) Utilizar de acuerdo ASTM B456 G SS13% Cr Uso para Bola y Tapón de acuerdo ASME B16.34 H SS TP304 Uso para Bola y Tapón de acuerdo ASME B16.34 I SS TP316 Uso para Bola y Tapón de acuerdo ASME B16.34 J BRONZE Especificar Norma de utilización. K OTROS • 6to Campo: Port Tabla 14. Port PORT 1 Full Port 2 Reducer Port 3 Full Port through conduit (Pig Service) • 7to Campo: Condiciones especiales Si son definidas condiciones especiales adicionales se podrán agregar de ser requeridas a partir de la L. De ser requerido se podrán incluir combinación de condiciones especiales. ECP-VST-G-GEN-FT-001 13/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 Tabla 15. Condiciones Especiales CONDICIÓN ESPECIFICAL A Cryogenic service B Marine Service (per USCG) C NACE (per ISO 15156/MR0175) D NACE MR0103 E D.O.T. Certified F UL/FM Certified G Single block and bleed sbb H Double block and bleed dbb I Low Emission J Fire Safe Certified K Extended Bonnet L Disponible 7.2.2. Tubería Tabla 16. Tag Tubería TAG TUBERIA T-01 ASTM A-53 Gr. B/ A-106 Gr. B/ API 5L Gr. B/X42 (SEAMLESS / ERW HFI/ SAW) T-02 API 5L X52/ X60/ X65/ X70/ X75/ X80 PSL1. (SEAMLESS / ERW HFI/ SAW) T-03 ASTM A-333 Gr. 6 (SEAMLESS) T-04 API 5L X52/ X60/ X65/ X70/ X75/ X80 PSL2. (SEAMLESS / ERW HFI/ SAW) (TEMPERATURA DE DISEÑO -50°F) Esta identificación de tubería no aplica para refinación y petroquímica. 7.2.3. Bridas Tabla 17. Tag Bridas TAG BRIDAS7 B-01 SOCKET WELD FLANGE, ASTM A-105, ASME B16.5 (1/2” HASTA 24”) ANSI B16.47 (26” HASTA 60”) B-02 WELDING NECK FLANGE, ASTM A-105, ASME B16.5 (1/2” HASTA 24”) ANSI B16.47 (26” HASTA 60”) B-03 BLIND FLANGE, ASTM A-105, ANSI B16.5 (1/2” HASTA 24”) ANSI B16.47 (26” HASTA 60”) B-04 WELDING NECK FLANGE, MSS SP-44 Gr. F42/F52/F60/F65/F70/F80, ANSI B16.5 (1/2” HASTA 24”) ANSI B16.47 (26” HASTA 60”) Definir con Serie A o B. Esta identificación de Bridas no aplica para refinación y petroquímica. 7.2.4. Accesorios 7 El esfuerzo admisible del accesorio (SMYS) del accesorio debe tener como mínimo el SMYS de la tubería ECP-VST-G-GEN-FT-001 14/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 Tabla 18. Tag Accesorios TAG ACCESORIOS8,9 A-01 SOCKET WELD / THREADED: 90° ELLBOW / 45° ELLBOW / TEE / REDUCER TEE / BUSHING / PLUG / COUPLING / HALF COUPLING / CONCENTRIC SWAGE / ECCENTRIC SWAGE / REDUCTION COUPLING (800#/ 3000# / 6000#) ASTM A-105, ANSI B16.11 A-02 BUTTWELD: 90° ELLBOW LR / 45° ELLBOW LR/ STRAIGHT TEE / SPLIT TEE / REDUCER TEE / CONCENTRIC REDUCER / ECCENTRIC REDUCER / CAP, ASTM A-234 Gr. WPB, ANSI B16.9 A-03 BUTTWELD: 90° ELLBOW LR / 45° ELLBOW LR/ STRAIGHT TEE / SPLIT TEE / REDUCER TEE / CONCENTRIC REDUCER / ECCENTRIC REDUCER / CAP, MSS SP-75 Gr. WPHY 42/52/60/65/70/75/80, ANSI B16.9 A-04 BUTTWELD: 90° ELLBOW LR / 45° ELLBOW LR/ STRAIGHT TEE / SPLIT TEE / REDUCER TEE / CONCENTRIC REDUCER / ECCENTRIC REDUCER / CAP, A182 F 11 CL 2, ANSI B16.11 A-05 BUTTWELD: 90° ELLBOW LR / 45° ELLBOW LR/ STRAIGHT TEE / SPLIT TEE / REDUCER TEE / CONCENTRIC REDUCER / ECCENTRIC REDUCER / CAP, A234 WP 11, ANSI B16.9 A-06 BUTTWELD: 90° ELLBOW LR / 45° ELLBOW LR/ STRAIGHT TEE / SPLIT TEE / REDUCER TEE / CONCENTRIC REDUCER / ECCENTRIC REDUCER / CAP, A182 F 11 CL 2, ANSI B16.11 A-07 BUTTWELD: 90° ELLBOW LR / 45° ELLBOW LR/ STRAIGHT TEE / SPLIT TEE / REDUCER TEE / CONCENTRIC REDUCER / ECCENTRIC REDUCER / CAP, A234 WP 11, ANSI B16.9 Esta identificación de Accesorios de tubería no aplica para refinación y petroquímica. 7.2.5. Pernos, Esparragos y Tuercas Tabla 19. Tag Accesorios para Pernos, Espárragos y Tuercas TAG ACCESORIOS P-01 Stud bolt threaded full length with continuous threads, including two heavy semifinished hexagonal nuts, ASTM 193 Gr. B7 / ASTM A-194 Gr. 2H. ASME B18.2.1, ASME B18.2.2. DIMENSIONS ANSI B16.5 AND ANSI B16.47 Esta identificación de Pernos, Espárragos y Tuercas no aplica para refinación y petroquímica. 7.2.6. Empaques Tabla 20. Tag Accesorios para Empaques TAG ACCESORIOS E-01 SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EZTERNAL CENTERING RINGS, 304 SS, DIMENSIONS ANSI B16.5 AND ANSI B16.47, ANSI B16.20, ANSI B16.21 E.02 SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EZTERNAL CENTERING RINGS, 316 SS, DIMENSIONS ANSI B16.5 AND ANSI B16.47, ANSI B16.20, ANSI B16.21 Esta identificación de Empaques no aplica para refinación y petroquímica 7.2.7. Derivación de Conexiones 8 El esfuerzo admisible del accesorio (SMYS) del accesorio debe tener como mínimo el SMYS de la tubería 9 Todos los Plug son con cabeza hexagonal ECP-VST-G-GEN-FT-001 15/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" 48" S S S S W W W W W W W W W R R R R R R R T 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S S T 1.5" R R R T R = TEE REDUCCIÓN 1" R R T 3/4" R T 1/2" T W = WELDOLET DIAMETRO CONECCIÓN DI AM E TR O C AB EZ AL NOMENCLATURA S = SOCKOLET T = TEE 7.3. LISTADO DE FLUIDOS IDENTIFICACIÓN DE LOS FLUIDOS ÍTEM FLUID / FLUIDO REFERENCIA CATEGORÍA 1 AMMONIUM CARBONATE CARBONATO DE AMONIO ACB N 2 SULPHURIC ACID DILUID "WEAK" (2% TO 30%, LOW PRESSURE) ÁCIDO SULFÚRICO DILUÍDO (2% TO 30%, BAJA PRESIÓN) ACDA M 3 SPENT SULPHURIC ACID. MISCELLANEOUS SERVICE ÁCIDO SULFÚRICO GASTADO, SERVICIO MISCELÁNEO ACDB M 4 STRONG SULPHURIC ACID ÁCIDO SULFÚRICO FUERTE ACDC M 5 LUBE OIL ACEITE LUBRICANTE ACI N 6 AMMONIUM CHLORIDE CLORURO DE AMONIO ACL N 7 ACID VAPORS VAPORES ÁCIDOS ACU N ECP-VST-G-GEN-FT-001 16/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 8 AMINE CLOSED DRAIN, AMMONIUM HYDROXIDE DRENAJE CERRADO DE AMINA, HIDRÓXIDO DE AMONIO ADH M 9 ADDITIVE ADITIVO ADT N 10 ACID FLARE AFL 11 CYCLE OIL – LIGHT ACEITE DE CICLO LIVIANO ALC N 12 AMMONIA AMONIACO AMM N 13 AMINE REGENERATOR ARG 14 AROMATIC HYDROCARBONS HIDROCARBUROS AROMÁTICOS ARM M 15 ASPHALT ASFALTO ASP M 16 AMMONIUM SULPHATE SULFATO DE AMONIO ASU N 17 ACID SEWER, VENTS AND DRAINS OF STRONG SULPHURIC ACID SUMIDERO ÁCIDO, VENTEOS Y DRENAJES DE ÁCIDO SULFÚRICO FUERTE ASW N 18 VENT TO ATMOSPHERE ATM 19 LIQUID SULPHUR AZÚFRE LÍQUIDO AZU M 20 LUBE OIL BASIS BASE DE ACEITE LUBRICANTE BAS N 21 BLOW DOWN BD 22 BOILER FEED WATER AGUA DE ALIMENTACIÓN DE CALDERA BFW N 23 BUTHANE BUTANO BUT D 24 CATALYST CATALIZADOR CAT N 25 CAUSTIC SODA, CAUSTIC SODA (10% TO 30%) SODA CAÚSTICA, SODA CAÚSTICA (10% A 30%) CAU N 26 MICROCRISTALLINE HARD WAX CERA DURA MICROCRISTALINA CHW N 27 CYCLOHEXANE CICLOHEXANO CIC M 28 CLARIFIED WATER AGUA CLARIFICADA CLW N 29 CONDENSATE CONDENSADO CND D ECP-VST-G-GEN-FT-001 17/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 30 COMBUSTION AIR COA 31 GASOLINE MOTOR REGULAR GASOLINA MOTOR REGULAR COC N 32 CRACKING GAS GAS DE CRAQUEO CRA N 33 BLENDED CRUDE CRUDO MEZCLADO CRM N 34 NAPHTHENIC CRUDE CRUDO NAFTÉNICO CRN N 35 PARAPHINIC CRUDE CRUDO PARAFÍNICO CRP N 36 RESIDUE CRUDE CRUDO DE RESIDUO CRR N 37 CRUDE OIL CRUDO CRU N 38 SULPHURIC ACID CONCENTRATED (93% TO 98%) ÁCIDO SULFÚRICO CONCENTRADO CSA N 39 MICROCRISTALLINE SOFT WAX CERA BLANDA MICROCRISTALINA CSW N 40 CUPIAGUA CRUDE CRUDO DE CUPIAGUA CUP M 41 CUSIANA CRUDE CRUDO DE CUSIANA CUS N 42 COOLING WATER – RETURN AGUA DE ENFRIAMIENTO - RETORNO CWR N 43 COOLING WATER – SUPPLY AGUA DE ENFRIAMIENTO – SUMINISTRO CWS D 44 AMINE (Di-Ethil-Amine) AMINA (Di-Etil-Amina) DEA D 45 DECOKING. INLET & OUTLET SECTIONS OF VISBREAKING HEATERS DECOQUIZADO, SECCIONES DE ENTRADA & SALIDA DE HORNOS DE VISCORREDUCTORA DEK M 46 DEIONIZED WATER AGUA DEIONIZADA DIW N 47 DECOKING STEAM VAPOR DECOQUIZADO DKS D 48 SULPHURIC ACID DILUID (2& TO 30%) ÁCIDO SULFÚRICO DILUÍDO (2% TO 30%) DSA N 49 DIESEL OIL “ACPM” DIESEL “ACPM” DSO M 50 DEMINERALIZED WATER AGUA DESMINERALIZADA DWA N 51 ETHANE ETANO ETA D ECP-VST-G-GEN-FT-001 18/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 52 ETHYLENE, ETHYLENE GAS ETILENO, GAS DE ETILENO ETI N 53 SEWER SUMIDERO EWS N 54 FLUOROPROTEINIC FIRE FOAM ESPUMA FLUOROPROTEÍNICA PARA CONTRAINCENDIO EXP D 55 GASOLINE MOTOR EXTRA GASOLINA MOTOR EXTRA EXT N 56 DEMEX BOTTOMS FONDOS DEMEX FDX N 57 SOUR GAS GAS ÁCIDO FGA N 58 FLUSHING OIL ACEITE DE LIMPIEZA FLO M 59 FLUE GAS GAS DE CHIMENEA FLU N 60 FUEL GAS GAS COMBUSTIBLE FUG D 61 FUEL OIL ACEITE COMBUSTIBLE FUO N 62 FIRE WATER AGUA CONTRAINCENDIO FWA N 63 GASOIL GASOLEO GLS D 64 GLYCOL GLICOL GLY N 65 GENERAL PROCESS PROCESO GENERAL GP 66 CYCLE OIL – HEAVY ACEITE DE CICLO PESADO HCO D 67 HIGH HYDROTREATED DIESEL DIESEL HDD 68 HEAVY HYDROCARBON HIDROCARBURO PESADO HEY N 69 HEAVY FUEL OIL ACEITE COMBUSTIBLE PESADO HFO N 70 HEAVY NAPHTHA NAFTA PESADA HGA N 71 HEAVY GASOIL GASOLEO PESADO HGO N 72 HOT OIL ACEITE CALIENTE HOL N 73 HIGH PRESSURE STEAM CONDENSATE HPC 74 HIGH PRESSURE STEAM VAPOR DE ALTA PRESIÓN HPS N ECP-VST-G-GEN-FT-001 19/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 75 HOT WATER AGUA CALIENTE HTW D 76 HYDROGEN HIDRÓGENO HYD N 77 HYDROCARBONS + HYDROGEN HIDROCARBUROS + HIDRÓGENO HYH N 78 HYDRAZINE HIDRACINA HYM N 79 INSTRUMENT AIR AIRE DE INSTRUMENTOS INA N 80 JET FUEL COMBUSTIBLE DE JET JET D 81 KEROSENE QUEROSENO KER N 82 POLYETHYLENE PELLETS, PELLET COOLING WATER PELLETS DE POLIETILENO, AGUA DE ENFRIAMIENTO PARA POLIETILENO LAC N 83 CHILLED WATER AGUA REFRIGERADA LCW N 84 LIGHT NAPHTHA NAFTA LIVIANA LGA N 85 LIGHT GASOIL GASOLEO LIVIANO LGO N 86 LIGHT HARD WAX CERA DURA LIVIANA LHW N 87 LOW HYDROTREATED DIESEL LHD 88 PEROXIDE PERÓXIDO LLPE N 89 VERY LOW PRESSURE STEAM VAPOR DE EXHOSTO LLS M 90 LUBRICATING OIL ACEITE MINERAL LMO D 91 LIQUID POLYETHYLENE POLIETILENO LÍQUIDO LP N 92 LOW PRESSURE CONDENSATE CONDENSADO DE BAJA PRESIÓN LPC N 93 ETHYLENE GAS + POLYETHYLENE, POLYETHYLENE + ETHYLENE GAS DE ETILENO + POLIETILENO, POLIETILENO + ETILENO LPE N 94 LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS GAS LICUADO DE PETRÓLEO, INCLUYE CORRIENTES DE OLEFINAS LPG N 95 LOW PRESSURE STEAM VAPOR DE BAJA PRESIÓN LPS N 96 LIGHT SOFT WAX CERA BLANDA LIVIANA LSW N ECP-VST-G-GEN-FT-001 20/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 97 AMINE (Mono-Ethil-Amine) AMINA (Mono-Etil-Amina) MEA D 98 METHANOL METANOL MEL M 99 MERCAPTAN MERCAPTANO MER N 100 MEDIUM HARD WAX CERA DURA MEDIA MHW N 101 MEDIUM PRESSURE STEAM CONDENSATE MPC 102 MEDIUM PRESSURE STEAM VAPOR DE MEDIA PRESIÓN MPS N 103 MEDIUM SOFT WAX CERA BLANDA MEDIA MSW N 104 LIGHT NAPHTHA + HYDROGEN NAFTA LIVIANA + HIDRÓGENO NAH D 105 NAPHTHA NAFTA NAP N 106 HYDROTREATED NAPHTHA + HYDROGEN NAFTA HIDROTRATADA + HIDRÓGENO NHH N 107 HYDROTREATED NAPHTHA NAFTA HIDROTRATADA NHT N 108 NITROGEN NITRÓGENO NIT N 109 NATURAL GAS GAS NATURAL NTG D 110 OILY WATER AGUAS ACEITOSAS OEW N 111 HEAVY OIL ACEITE PESADO OIL N 112 OILY WATER SEWER SUMIDERO DE AGUAS ACEITOSAS OSW N 113 PROCESS GAS P 114 PLATFORMADO + HYDROGEN PLATFORMADO + HIDRÓGENO PLH N 115 PLATFORMADO PLATFORMADO PLT M 116 POLYETHYLENE POLIETILENO POL M 117 PROPANOL PROPANOL PPL N 118 PROPYLENE PROPILENO PPN N 119 PROPANE PROPANO PRY N ECP-VST-G-GEN-FT-001 21/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 120 PSA PURGE GAS(HYDROGEN) PSA GAS DE PURGA ( HIDROGENO) PUH 121 POTABLE WATER AGUA POTABLE PWA N 122 QUENCH OIL ACEITE DE ENFRIAMIENTO QHO D 123 CHEMICALS QUIMICOS QUI D 124 RAW WATER AGUA CRUDA RAW N 125 REFORMATE REFORMADO REF D 126 RAIN WATER SEWER RWS 127 SEAL OIL ACEITE DE SELLO SEO D 128 SLOP. HEAVY SLOP SLOP PESADO SLH N 129 SLOP SLOP SLP N 130 SO2 GAS GAS SO2 SO2 N 131 SANITARY SEWER SUMIDERO SANITARIO SSW D 132 HYDROGEN SULPHIDE SULFURO DE HIDRÓGENO SUA D 133 DISCHARGE TO FLARE BLOWDOWN ALIVIOS DE PRESIÓN A TEA SVH M 134 SOFTENED WATER AGUA SUAVIZADA SWA N 135 SOUR WATER AGUA ÁCIDA SWI D 136 SWEET GAS SWG 137 SOUR WATER SEWER SWS 138 SLURRY SLURRY TAR M 139 TAIL GAS TG 140 TOTAL NAPHTHA TNA 141 FILTERED WATER AGUA FILTRADA TRW N 142 INDUSTRIAL AIR AIRE INDUSTRIAL UTA D ECP-VST-G-GEN-FT-001 22/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 143 HYDROCARBONS VAPORS VAPORES DE HIDROCARBUROS VAP D 144 PROCESS GAS (H2 GENERATION UNIT) GAS DE PROCESO VAP 145 WASTE WATER AGUA RESIDUAL WWT N 7.4. DESCRIPCION DE CLASES DE TUBERIA Anexo 1. Se encuentran los documentos con la descripción de las clases de tubería para uso de Refinación y producción. Anexo 2. Se encuentran los documentos con la descripción de las clases de tubería para uso en transporte con el formato (VIT-GDD-F-028). 8. REGISTROS No aplica. 9. CONTINGENCIAS No se prevén contingencias para esta Especificación Técnica. 10. BIBLIOGRAFÍA No aplica. 11. ANEXOS Anexo 1. Documentos Clases Piping class Producción y Refinación. Anexo 2. Documentos Clases Piping class Transporte. Para mayor información sobre este documento dirigirse a quien lo elaboró, en nombre de la dependencia responsable: Elaboró: Reynaldo Prada Grataron Teléfono: 6847431 Dependencia: ICP – UGC ECP-VST-G-GEN-FT-001 23/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 ANEXO 1 ECP-VST-G-GEN-FT-001 24/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 AROMATIC HYDROCARBONS ARM 150 272 BLENDED CRUDE CRM 200 260 CHEMICALS QUI 300 230 CHILLED WATER LCW 400 200 CLARIFIED WATER CLW 500 170 CONDENSATE CND PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA1A23A-01 FLANGE FINISH DATE: 5-oct-04 RF 500 170 CONDENSATE CND 600 140 COOLING WATER - RETURN CWR 650 125 COOLING WATER - SUPPLY CWS 700 110 CRUDE OIL CRU CUPIAGUA CRUDE CUP CUSIANA CRUDE CUS CYCLE OIL - HEAVY HCO CYCLE OIL - LIGHT ALC DEMINERALIZED WATER DWA DIESEL OIL “ACPM” DSO FILTERED WATER TRW FIRE WATER FWA FLUE GAS FLU FLUOROPROTEINIC FIRE FOAM EXP FUEL GAS FUG ECP-VST-G-GEN-FT-001 25/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA1A23A-01 FLANGE FINISH DATE: 5-oct-04 RF FUEL OIL FUO GASOIL GLS GASOLINE MOTOR EXTRA EXT GASOLINE MOTOR REGULAR COC HEAVY FUEL OIL HFO HEAVY GASOIL HGO HEAVY NAPHTHA HGAHEAVY NAPHTHA HGA HIGH PRESSURE STEAM HPS HOT OIL HOL HOT WATER HTW HYDROCARBONS VAPORS VAP HYDROGEN HYD INDUSTRIAL AIR UTA INSTRUMENT AIR INA JET FUEL JET KEROSENE KER LIGHT GASOIL LGO LIGHT NAPHTHA LGA LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG LOW PRESSURE CONDENSATE LPC LOW PRESSURE STEAM LPS LUBE OIL ACI ECP-VST-G-GEN-FT-001 26/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA1A23A-01 FLANGE FINISH DATE: 5-oct-04 RF LUBE OIL BASIS BAS LUBRICATING OIL LMO MEDIUM PRESSURE STEAM MPS NAPHTHA NAP NAPHTHENIC CRUDE CRN NATURAL GAS NTG NITROGEN NITNITROGEN NIT OILY WATER OEW OILY WATER SEWER OSW POTABLE WATER PWA PROPANE PRY QUENCH OIL QHO RAW WATER RAW SANITARY SEWER SSW SEAL OIL SEO SEWER EWS SLOP SLP SLOP. HEAVY SLOP SLH SOFTENED WATER SWA VERY LOW PRESSURE STEAM LLS WASTE WATER WWT ECP-VST-G-GEN-FT-001 27/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA1A23A-01 FLANGE FINISH DATE: 5-oct-04 RF NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 28/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA1A23A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA1A23A-01 2 1/2 12 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA1A23A-01 14 24 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA1A23A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16 34 TESTS AS PER API 598 TRIM F8 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA1A23A-01 2 1/2 24 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA1A23A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA1A23A-01 2 1/2 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BUTTERFLY VALVE AA1A23A-01 2 1/2 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 9 BUTTERFLY VALVE AA1A23A-01 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 10 BALL VALVE AA1A23A-01 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 11 BALL VALVE AA1A23A-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR ECP-VST-G-GEN-FT-001 29/761 PIPING CLASS CLASS: AA1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 12 BALL VALVE AA1A23A-01 2 1/2 12 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, SS 316 BALL, HANDWHEEL OPERATOR 13 BALL VALVE AA1A23A-01 14 24 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, SS 316 BALL, GEAR OPERATOR 14 PLUG VALVE AA1A23A-01 2 1/2 12 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 15 PLUG VALVE AA1A23A-01 14 24 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 16 PIPE AA1A23A-01 1/2 2 PE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 17 PIPE AA1A23A-01 2 1/2 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 18 PIPE AA1A23A-01 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 45 DEGREES AA1A23A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 20 ELBOW 45 DEGREES AA1A23A-01 2 1/2 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ELBOW 45 DEGREES AA1A23A-01 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 ELBOW 90 DEGREES AA1A23A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS, , , PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 ELBOW 90 DEGREES AA1A23A-01 2 1/2 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ELBOW 90 DEGREES AA1A23A-01 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 CONCENTRIC REDUCER AA1A23A-01 1/2 2 80 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 26 CONCENTRIC REDUCER AA1A23A-01 2 1/2 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 CONCENTRIC REDUCER AA1A23A-01 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 ECCENTRIC REDUCER AA1A23A-01 1/2 2 80 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 29 ECCENTRIC REDUCER AA1A23A-01 2 1/2 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 ECCENTRIC REDUCER AA1A23A-01 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 REDUCER INSERT AA1A23A-01 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 32 CAP AA1A23A-01 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 33 CAP AA1A23A-01 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 34 CAP AA1A23A-01 2 1/2 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 35 CAP AA1A23A-01 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 36 STRAIGHT AND REDUCER TEE AA1A23A-01 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 37 STRAIGHT AND REDUCER TEE AA1A23A-01 2 1/2 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 38 STRAIGHT AND REDUCER TEE AA1A23A-01 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 30/761 PIPING CLASS CLASS: AA1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 39 OLET AA1A23A-01 1/2 2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS- SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 40 OLET AA1A23A-01 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS- SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 41 OLET AA1A23A-01 2 1/2 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 42 OLET AA1A23A-01 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 43 PLUG AA1A23A-01 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 44 COUPLING AA1A23A-01 1/2 2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 45 COUPLING AA1A23A-01 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 46 HALF COUPLING AA1A23A-01 1/2 2 3000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 47 HALF COUPLING AA1A23A-01 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 48 NIPPLE AA1A23A-01 1/2 2 THD 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 49 NIPPLE AA1A23A-01 1/2 2 PE 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 50 FLANGE AA1A23A-01 1/2 2 150 RF 80 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 51 FLANGE AA1A23A-01 2 1/2 8 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 52 FLANGE AA1A23A-01 10 24 150 RF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 53 BLIND FLANGE AA1A23A-01 1/2 24 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 54 ORIFICE FLANGE AA1A23A-01 1/2 2 300 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 55 ORIFICE FLANGE AA1A23A-01 2 1/2 8 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 56 ORIFICE FLANGE AA1A23A-01 10 24 300 RF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 57 BLIND PLATE AA1A23A-01 14 24 150 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 58 SPACER RING AA1A23A-01 14 24 150 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 59 FIGURE 8 AA1A23A-01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS59 FIGURE 8 AA1A23A 01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 60 DRIP RINGS AA1A23A-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 61 GASKET AA1A23A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 62 BOLTING AA1A23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 31/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA1A23A-01 ECP-VST-G-GEN-FT-001 32/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 AMINE (Di-Ethil-Amine) DEA CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS A1A33A-01 FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF ANSI RATING 150 272 AMINE (Mono-Ethil-Amine) MEA 200 260 AMMONIA AMM 300 230 AROMATIC HYDROCARBONS ARM 400 200 ASPHALT ASP 500 170 BOILER FEED WATER BFW 600 140 BUTHANE BUT 650 125 CATALYST CAT 700 110 CAUSTIC SODA CAU CHEMICALS QUI CHILLED WATER LCW CLARIFIED WATER CLW CONDENSATE CND ECP-VST-G-GEN-FT-001 33/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 DESIGN TEMPERATURE (°F): From: -20 To: 750 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS A1A33A-01 FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF ANSI RATING COOLING WATER - RETURN CWR COOLING WATER - SUPPLY CWS CRACKING GAS CRA CRUDE OIL CRU CUPIAGUA CRUDE CUPCUPIAGUA CRUDE CUP CUSIANA CRUDE CUS CYCLE OIL - HEAVY HCO CYCLE OIL - LIGHT ALC DECOKING STEAM DKS DEMEX BOTTOMS FDX DEMINERALIZED WATER DWA DIESEL OIL “ACPM” DSO ETHANE ETA ETHYLENE ETI FILTERED WATER TRW FIRE WATER FWA FLUE GAS FLU ECP-VST-G-GEN-FT-001 34/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 DESIGN TEMPERATURE (°F): From: -20 To: 750 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS A1A33A-01 FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF ANSI RATING FLUOROPROTEINIC FIRE FOAM EXP FUEL GAS FUG FUEL OIL FUO GASOIL GLS GASOLINE MOTOR EXTRA EXT GASOLINE MOTOR REGULAR COC GLYCOL GLY HEAVY FUEL OIL HFO HEAVY GASOIL HGO HEAVY NAPHTHA HGA HIGH PRESSURE STEAM HPS HOT OIL HOL HOT WATER HTW HYDROCARBONS VAPORS VAP HYDROGEN HYD INDUSTRIAL AIR UTA ECP-VST-G-GEN-FT-001 35/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 DESIGN TEMPERATURE (°F): From: -20 To: 750 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS A1A33A-01 FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF ANSI RATING INSTRUMENT AIR INA KEROSENE KER LIGHT GASOIL LGO LIGHT HARD WAX LHWLIGHT HARD WAX LHW LIGHT NAPHTHA LGA LIGHT SOFT WAX LSW LIQUID POLYETHYLENE LP LIQUID SULPHUR AZU LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN F LPG LOW PRESSURE CONDENSATE LPC LOW PRESSURE STEAM LPS LUBE OIL ACI LUBE OIL BASIS BAS LUBRICATING OIL LMO MEDIUM HARD WAX MHW ECP-VST-G-GEN-FT-001 36/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 DESIGN TEMPERATURE (°F): From: -20 To: 750 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS A1A33A-01 FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF ANSI RATING MEDIUM PRESSURE STEAM MPS MEDIUM SOFT WAX MSW METHANOL MEL MICROCRISTALLINE HARD WAX CHW MICROCRISTALLINE SOFT WAX CSW NAPHTHA NAP NAPHTHENIC CRUDE CRN NATURAL GAS NTG NITROGEN NIT OILY WATER OEW OILY WATER SEWER OSW PLATFORMADO PLT POLYETHYLENE + ETHYLENE LPE POTABLE WATER PWA PROPANE PRY PROPYLENE PPN ECP-VST-G-GEN-FT-001 37/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 DESIGN TEMPERATURE (°F): From: -20 To: 750 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS A1A33A-01 FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF ANSI RATING QUENCH OIL QHO RAW WATER RAW REFORMATE REF RESIDUE CRUDE CRR SANITARY SEWER SSW SEAL OIL SEO SEWER EWS SLOP SLP SLOP. HEAVY SLOP SLH SO2 GAS SO2 SOFTENED WATER SWA VERY LOW PRESSURE STEAM LLS ECP-VST-G-GEN-FT-001 38/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 DESIGN TEMPERATURE (°F): From: -20 To: 750 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS A1A33A-01 FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF ANSI RATING WASTE WATER WWT NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 39/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: A1A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE A1A33A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE A1A33A-01 2 1/2 12 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE A1A33A-01 14 24 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS GRAPHITE STEM PACKING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE A1A33A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A- 105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE A1A33A-01 2 1/2 24 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE A1A33A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE A1A33A-01 2 1/2 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 40/761 PIPING CLASS CLASS: A1A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 8 BUTTERFLY VALVE A1A33A-01 2 1/2 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 9 BUTTERFLY VALVE A1A33A-01 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 10 BALL VALVE A1A33A-01 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 11 BALL VALVE A1A33A-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 12 BALL VALVE A1A33A-01 2 1/2 12 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 13 BALL VALVE A1A33A-01 14 24 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 14 PLUG VALVE A1A33A-01 2 1/2 12 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PERB16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 15 PLUG VALVE A1A33A-01 14 24 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 16 PIPE A1A33A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 17 PIPE A1A33A-01 2 1/2 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 18 PIPE A1A33A-01 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 45 DEGREES A1A33A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 20 ELBOW 45 DEGREES A1A33A-01 2 1/2 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ELBOW 45 DEGREES A1A33A-01 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 ELBOW 90 DEGREES A1A33A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 ELBOW 90 DEGREES A1A33A-01 2 1/2 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ELBOW 90 DEGREES A1A33A-01 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 CONCENTRIC REDUCER A1A33A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 26 CONCENTRIC REDUCER A1A33A-01 2 1/2 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 41/761 PIPING CLASS CLASS: A1A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 27 CONCENTRIC REDUCER A1A33A-01 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 ECCENTRIC REDUCER A1A33A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 29 ECCENTRIC REDUCER A1A33A-01 2 1/2 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 ECCENTRIC REDUCER A1A33A-01 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 REDUCER INSERT A1A33A-01 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 32 CAP A1A33A-01 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 33 CAP A1A33A-01 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 34 CAP A1A33A-01 2 1/2 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 35 CAP A1A33A-01 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 36 STRAIGHT AND REDUCER TEE A1A33A-01 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 37 STRAIGHT AND REDUCER TEE A1A33A-01 2 1/2 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 38 STRAIGHT AND REDUCER TEE A1A33A-01 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A38 STRAIGHT AND REDUCER TEE A1A33A 01 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 39 OLET A1A33A-01 1/2 2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 40 OLET A1A33A-01 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 41 OLET A1A33A-01 2 1/2 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 42 OLET A1A33A-01 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 43 PLUG A1A33A-01 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 44 COUPLING A1A33A-01 1/2 2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 45 COUPLING A1A33A-01 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 46 HALF COUPLING A1A33A-01 1/2 2 3000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 47 HALF COUPLING A1A33A-01 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 48 NIPPLE A1A33A-01 1/2 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 49 NIPPLE A1A33A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 50 FLANGE A1A33A-01 1/2 2 150 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 51 FLANGE A1A33A-01 2 1/2 8 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 52 FLANGE A1A33A-01 10 24 150 RF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 53 BLIND FLANGE A1A33A-01 1/2 24 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 42/761 PIPING CLASS CLASS: A1A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 54 ORIFICE FLANGE A1A33A-01 1/2 2 300 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A- 105. 55 ORIFICE FLANGE A1A33A-01 2 1/2 8 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A- 105. 56 ORIFICE FLANGE A1A33A-01 10 24 300 RF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A- 105. 57 BLIND PLATE A1A33A-01 14 24 150 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 58 SPACER RING A1A33A-01 14 24 150 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 59 FIGURE 8 A1A33A-01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70,59 FIGURE 8 A1A33A 01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 60 DRIP RINGS A1A33A-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 61 GASKET A1A33A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 62 BOLTING A1A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 43/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T S 8 W R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: A1A33A-01 ECP-VST-G-GEN-FT-001 44/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 HYDROGEN SULPHIDE SUA 150 272 SLURRY TAR 200 260 300 230 400 200 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 3/16" PIPING CLASS AA1A43A-01 FLANGE FINISH DATE: 5-oct-04 RF 500 170 600 140 650 125 700 110 ECP-VST-G-GEN-FT-001 45/761 Elaborado 25/03/2011 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PIPING CLASS NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 46/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA1A43A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA1A43A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA1A43A-01 3 12 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA1A43A-01 14 24 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA1A43A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA1A43A-01 3 24 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA1A43A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA1A43A-01 3 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BUTTERFLY VALVE AA1A43A-01 3 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 9 BUTTERFLY VALVE AA1A43A-01 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 10 BALL VALVE AA1A43A-01 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A- 105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR ECP-VST-G-GEN-FT-001 47/761 PIPING CLASS CLASS: AA1A43A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 11 BALL VALVE AA1A43A-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A- 105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 12 BALL VALVE AA1A43A-01 3 12 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 13 BALL VALVE AA1A43A-01 14 24 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 14 PLUG VALVE AA1A43A-01 3 12 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 15 PLUG VALVE AA1A43A-01 14 24 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 16 PIPE AA1A43A-01 1/2 3/4 PE XXS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 17 PIPE AA1A43A-01 1 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 18 PIPE AA1A43A-01 3 4 BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 19 PIPE AA1A43A-01 6 24 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 20 ELBOW 45 DEGREES AA1A43A-01 1/2 3/4 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16 11 SOCKET WELDING ENDS ASDIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 ELBOW 45 DEGREES AA1A43A-01 1 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 ELBOW 45 DEGREES AA1A43A-01 3 4 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ELBOW 45 DEGREES AA1A43A-01 6 24 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ELBOW 90 DEGREES AA1A43A-01 1/2 3/4 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 25 ELBOW 90 DEGREES AA1A43A-01 1 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 26 ELBOW 90 DEGREES AA1A43A-01 3 4 BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 ELBOW 90 DEGREES AA1A43A-01 6 24 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 CONCENTRIC REDUCER AA1A43A-01 1/2 3/4 XXS CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 29 CONCENTRIC REDUCER AA1A43A-01 1 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 30 CONCENTRIC REDUCER AA1A43A-01 3 4 BW 80 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 CONCENTRIC REDUCER AA1A43A-01 6 24 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 ECCENTRIC REDUCER AA1A43A-01 1/2 3/4 XXS CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 33 ECCENTRIC REDUCER AA1A43A-01 1 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 34 ECCENTRIC REDUCER AA1A43A-01 3 4 BW 80 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 48/761 PIPING CLASS CLASS: AA1A43A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 35 ECCENTRIC REDUCER AA1A43A-01 6 24 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 36 REDUCER INSERT AA1A43A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 37 CAP AA1A43A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 38 CAP AA1A43A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 39 CAP AA1A43A-01 3 4 BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 40 CAP AA1A43A-01 6 24 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 41 STRAIGHT AND REDUCER TEE AA1A43A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 42 STRAIGHT AND REDUCER TEE AA1A43A-01 3 4 BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 43 STRAIGHT AND REDUCER TEE AA1A43A-01 6 24 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 44 OLET AA1A43A-01 1/2 2 6000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 45 OLET AA1A43A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 46 OLET AA1A43A-01 3 4 BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 47 OLET AA1A43A-01 6 24 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 48 PLUG AA1A43A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 49 COUPLING AA1A43A 01 1/2 2 6000 THD CARBON STEEL COUPLING ASTM A 105 DIMENSIONS AS PER49 COUPLING AA1A43A-01 1/2 2 6000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 50 COUPLING AA1A43A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 51 HALF COUPLING AA1A43A-01 1/2 2 6000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 52 HALF COUPLING AA1A43A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 53 NIPPLE AA1A43A-01 1/2 3/4 THD XXS CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 54 NIPPLE AA1A43A-01 1 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 55 NIPPLE AA1A43A-01 1/2 3/4 PE XXS CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 56 NIPPLE AA1A43A-01 1 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 57 FLANGE AA1A43A-01 1/2 3/4 150 RF XXS CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 58 FLANGE AA1A43A-01 1 2 150 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 59 FLANGE AA1A43A-01 3 4 150 RF 80 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 60 FLANGE AA1A43A-01 6 24 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 61 BLIND FLANGE AA1A43A-01 1/2 24 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 49/761 PIPING CLASS CLASS: AA1A43A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 62 ORIFICE FLANGE AA1A43A-01 1 2 300 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 63 ORIFICE FLANGE AA1A43A-01 3 4 300 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 64 ORIFICE FLANGE AA1A43A-01 6 24 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 65 BLIND PLATE AA1A43A-01 14 24 150 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 66 SPACER RING AA1A43A-01 14 24 150 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16 5 RAISED FACE ENDSDIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 67 FIGURE 8 AA1A43A-01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 68 DRIP RINGS AA1A43A-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 69 GASKET AA1A43A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 70 BOLTING AA1A43A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 50/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA1A43A-01 ECP-VST-G-GEN-FT-001 51/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 FIRE WATER FWA 150 272 200 260 300 230 400 200 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador1/8" PIPING CLASS AA1C33A-01 FLANGE FINISH DATE: 10-ene-00 FF ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 400 200 500 170 600 140 650 125 700 110 ECP-VST-G-GEN-FT-001 52/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 DESIGN TEMPERATURE (°F): From: -20 To: 700 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador1/8" PIPING CLASS AA1C33A-01 FLANGE FINISH DATE: 10-ene-00 FF ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 53/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA1C33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA1C33A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA1C33A-01 3 12 150 FF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA1C33A-01 14 24 150 FF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA1C33A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA1C33A-01 3 24 150 FF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA1C33A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA1C33A-01 3 12 150 FF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BUTTERFLY VALVE AA1C33A-01 3 12 150 FF CARBON STEEL, BUTTERFLY VALVE, LUGGED TYPE, ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 9 BUTTERFLY VALVE AA1C33A-01 14 24 150 FF CARBON STEEL, BUTTERFLY VALVE, LUGGED TYPE, ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 10 BALL VALVE AA1C33A-01 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, CONSTRUCTION AS PER ASME B 16.34, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 11 BALL VALVE AA1C33A-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, CONSTRUCTION AS PER ASME B 16.34, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 12 BALL VALVE AA1C33A-01 3 12 150 FF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR ECP-VST-G-GEN-FT-001 54/761 PIPING CLASS CLASS: AA1C33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 13 BALL VALVE AA1C33A-01 14 24 150 FF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 14 PLUG VALVE AA1C33A-01 3 12 150 FF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, HANDWHEEL OPERATOR 15 PLUG VALVE AA1C33A-01 14 24 150 FF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, GEAR OPERATOR 16 PIPE AA1C33A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 17 PIPE AA1C33A-01 3 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 18 PIPE AA1C33A-01 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 45 DEGREES AA1C33A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 20 ELBOW 45 DEGREES AA1C33A-01 3 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ELBOW 45 DEGREES AA1C33A-01 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 ELBOW 90 DEGREES AA1C33A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 ELBOW 90 DEGREES AA1C33A-01 3 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ELBOW 90 DEGREES AA1C33A-01 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 CONCENTRIC REDUCER AA1C33A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1 20 1 OR BEVELED END AS PER ASME B16 25PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 26 CONCENTRIC REDUCER AA1C33A-01 3 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 CONCENTRIC REDUCER AA1C33A-01 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 ECCENTRIC REDUCER AA1C33A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 29 ECCENTRIC REDUCER AA1C33A-01 3 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 ECCENTRIC REDUCER AA1C33A-01 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 REDUCER INSERT AA1C33A-01 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 32 CAP AA1C33A-01 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 33 CAP AA1C33A-01 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 34 CAP AA1C33A-01 3 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 35 CAP AA1C33A-01 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 36 STRAIGHT AND REDUCER TEE AA1C33A-01 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 37 STRAIGHT AND REDUCER TEE AA1C33A-01 3 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 38 STRAIGHT AND REDUCER TEE AA1C33A-01 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 39 OLET AA1C33A-01 1/2 2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS- SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 40 OLET AA1C33A-01 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING ENDS AS PER ASME B16.11 41 OLET AA1C33A-01 3 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 42 OLET AA1C33A-01 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 55/761 PIPING CLASS CLASS: AA1C33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 43 PLUG AA1C33A-01 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 44 COUPLING AA1C33A-01 1/2 2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 45 COUPLING AA1C33A-01 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 46 HALF COUPLING AA1C33A-01 1/2 2 3000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 47 HALF COUPLING AA1C33A-01 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 48 NIPPLE AA1C33A-01 1/2 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 49 NIPPLE AA1C33A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 50 FLANGE AA1C33A-01 1/2 2 150 FF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 51 FLANGE AA1C33A-01 3 8 150 FF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 52 FLANGE AA1C33A-01 10 24 150 FF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 53 BLIND FLANGE AA1C33A-01 1/2 24 150 FF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 54 ORIFICE FLANGE AA1C33A-01 1/2 2 300 FF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 55 ORIFICE FLANGE AA1C33A-01 3 8 300 FF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 56 ORIFICE FLANGE AA1C33A-01 10 24 300 FF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16 36 COMPLETE WITH SPACING JACK SCREWS BOLTS ASTMASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 57 BLIND PLATE AA1C33A-01 14 24 150 FF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, FLAT FACE ENDS 58 SPACER RING AA1C33A-01 14 24 150 FF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, FLAT FACE ENDS 59 FIGURE 8 AA1C33A-01 1/2 12 150 FF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, FLAT FACE ENDS 60 DRIP RINGS AA1C33A-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, FLAT FACE ENDS 61 GASKET AA1C33A-01 1/2 24 150 FF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR FLAT FACE FLANGES ASME B16.5 62 BOLTING AA1C33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 56/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 0 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA1C33A-01 ECP-VST-G-GEN-FT-001 57/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 CAUSTIC SODA (10% TO 30%) CAU 150 272 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AA1A33A-01 FLANGE FINISH DATE: 5-oct-04 RF ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 58/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA1A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA1A33A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM Monel K, AISI 304 SPIRAL WOUND BONNET GASKET PTFE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, MONEL INTEGRAL SEAT RINGS, PTFE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA1A33A-01 3 12 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM Monel K, AISI 304 SPIRAL WOUND BONNET GASKET PTFE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, MONEL RENEWABLE SEAT RINGS, PTFE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA1A33A-01 14 24 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM Monel K, AISI 304 SPIRAL WOUND BONNET GASKET PTFE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, MONEL RENEWABLE SEAT RINGS, PTFE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA1A33A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM Monel K, AISI 304 SPIRAL WOUND GASKET WITH PTFE FILLER BOLTED CAP 316 SS BALL MONEL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 GASKET WITH PTFE FILLER, BOLTED CAP, 316 SS BALL, MONEL INTEGRAL SEAT, . 5 CHECK VALVE AA1A33A-01 3 24 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM Monel K, AISI 304 SPIRAL WOUND BONNET GASKET PTFE FILLER, BOLTED CAP, MONEL RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA1A33A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM Monel K, AISI 304 SPIRAL WOUND GASKET WITH PTFE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, PTFE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA1A33A-01 3 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM Monel K, AISI 304 SPIRAL WOUND BONNET GASKET PTFE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, MONEL RENEWABLE SEAT RINGS, PTFE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BUTTERFLY VALVE AA1A33A-01 3 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 9 BUTTERFLY VALVE AA1A33A-01 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 10 BALL VALVE AA1A33A-01 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A- 105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM Monel K, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR ECP-VST-G-GEN-FT-001 59/761 PIPING CLASS CLASS: AA1A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 11 BALL VALVE AA1A33A-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A- 105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM Monel K, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 12 BALL VALVE AA1A33A-01 3 12 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM Monel K, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 13 BALL VALVE AA1A33A-01 14 24 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM Monel K, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 14 PLUG VALVE AA1A33A-01 3 12 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM Monel K, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 15 PLUG VALVE AA1A33A-01 14 24 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM Monel K, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 16 PIPE AA1A33A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 17 PIPE AA1A33A-01 3 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 18 PIPE AA1A33A-01 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 45 DEGREES AA1A33A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16 11AS PER ASME B16.11 20 ELBOW 45 DEGREES AA1A33A-01 3 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ELBOW 45 DEGREES AA1A33A-01 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 ELBOW 90 DEGREES AA1A33A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 ELBOW 90 DEGREES AA1A33A-01 3 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ELBOW 90 DEGREES AA1A33A-01 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 CONCENTRIC REDUCER AA1A33A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 26 CONCENTRIC REDUCER AA1A33A-01 3 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 CONCENTRIC REDUCER AA1A33A-01 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 ECCENTRIC REDUCER AA1A33A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 29 ECCENTRIC REDUCER AA1A33A-01 3 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 ECCENTRIC REDUCER AA1A33A-01 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 REDUCER INSERT AA1A33A-01 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 32 CAP AA1A33A-01 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 33 CAP AA1A33A-01 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 60/761 PIPING CLASS CLASS: AA1A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 34 CAP AA1A33A-01 3 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 35 CAP AA1A33A-01 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 36 STRAIGHT AND REDUCER TEE AA1A33A-01 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 37 STRAIGHT AND REDUCER TEE AA1A33A-01 3 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 38 STRAIGHT AND REDUCER TEE AA1A33A-01 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 39 OLET AA1A33A-01 1/2 2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 40 OLET AA1A33A-01 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 41 OLET AA1A33A-01 3 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 42 OLET AA1A33A-01 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 43 PLUG AA1A33A-01 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 44 COUPLING AA1A33A-01 1/2 2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 45 COUPLING AA1A33A-01 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 46 HALF COUPLING AA1A33A-01 1/2 2 3000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 47 HALF COUPLING AA1A33A 01 1/2 2 3000 SW CARBON STEEL HALF COUPLING ASTM A 105 DIMENSIONS47 HALF COUPLING AA1A33A-01 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 48 NIPPLE AA1A33A-01 1/2 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 49 NIPPLE AA1A33A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 50 FLANGE AA1A33A-01 1/2 2 150 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 51 FLANGE AA1A33A-01 3 8 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 52 FLANGE AA1A33A-01 10 24 150 RF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 53 BLIND FLANGE AA1A33A-01 1/2 24 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 54 ORIFICE FLANGE AA1A33A-01 1/2 2 300 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 55 ORIFICE FLANGE AA1A33A-01 3 8 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. ECP-VST-G-GEN-FT-001 61/761 PIPING CLASS CLASS: AA1A33A-01 Item PIPING ELEMENT CLASS DN from DN to RATI NG FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 56 ORIFICE FLANGE AA1A33A-01 10 24 300 RF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A- 105. 57 BLIND PLATE AA1A33A-01 14 24 150 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 58 SPACER RING AA1A33A-01 14 24 150 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 59 FIGURE 8 AA1A33A-01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 60 DRIP RINGS AA1A33A-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 61 GASKET AA1A33A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH PTFE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 62 BOLTING AA1A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 62/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA1A33A-01 ECP-VST-G-GEN-FT-001 63/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-106 CARBON STEEL, REQUIREMENTS AS PER NACE MR0103 DESIGN TEMPERATURE (°F): From: -20 To: 250 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 DISCHARGE TO FLARE BLOWDOWN SVH 150 272 SOUR WATER SWI 200 260 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 AA1A33A-01 ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PIPING CLASS CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: 5-oct-04 RF 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 64/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA1A33A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM SS316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, HANDWHEEL 2 GATE VALVE AA1A33A-01 3 8 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, REQUIREMENTS AS PER NACE MR0103, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM SS316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA1A33A-01 10 12 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM SS316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA1A33A-01 1/2 2 800 SW CARBON STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM SS316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE AA1A33A-01 3 12 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM SS316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE INTEGRAL SEAT RINGS, . 6 GLOBE VALVE AA1A33A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM SS316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, HANDWHEEL 7 GLOBE VALVE AA1A33A-01 3 8 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM SS316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 65/761 PIPING CLASS CLASS: AA1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 8 GLOBE VALVE AA1A33A-01 10 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM SS316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 BUTTERFLY VALVE AA1A33A-01 3 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, REQUIREMENTS AS PER NACE MR0103, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 10 BUTTERFLY VALVE AA1A33A-01 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, REQUIREMENTS AS PER NACE MR0103, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 11 PIPE AA1A33A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, PLAIN ENDS 12 PIPE AA1A33A-01 3 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 13 PIPE AA1A33A-01 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 45 DEGREES AA1A33A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 15 ELBOW 45 DEGREES AA1A33A-01 3 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 45 DEGREES AA1A33A-01 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES AA1A33A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 18 ELBOW 90 DEGREES AA1A33A-01 3 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 90 DEGREES AA1A33A-01 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR WPB DIMENSIONS AS PER ASME B16 9 REQUIREMENTS ASGR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER AA1A33A-01 1/2 2 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR0103, PLAIN END, OR BEVELED END AS PER ASME B16.25 21 CONCENTRIC REDUCER AA1A33A-01 3 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 22 CONCENTRIC REDUCER AA1A33A-01 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER AA1A33A-01 1/2 2 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR0103, PLAIN END, OR BEVELED END AS PER ASME B16.25 24 ECCENTRIC REDUCER AA1A33A-01 3 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 25 ECCENTRIC REDUCER AA1A33A-01 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 26 CAP AA1A33A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 CAP AA1A33A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 28 CAP AA1A33A-01 3 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 29 CAP AA1A33A-01 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE AA1A33A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 66/761 PIPING CLASS CLASS: AA1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 31 STRAIGHT AND REDUCER TEE AA1A33A-01 3 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 32 STRAIGHT AND REDUCER TEE AA1A33A-01 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 33 OLET AA1A33A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS- SP-97, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 34 OLET AA1A33A-01 3 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 35 OLET AA1A33A-01 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 36 PLUG AA1A33A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 37 COUPLING AA1A33A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 38 NIPPLE AA1A33A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, PLAIN ENDS 39 FLANGE AA1A33A-01 1/2 2 150 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACEDIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 40 FLANGE AA1A33A-01 3 8 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 41 FLANGE AA1A33A-01 10 24 150 RF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 42 BLIND FLANGE AA1A33A-01 1 1/2 24 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 43 FIGURE 8 AA1A33A-01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 44 DRIP RINGS AA1A33A-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 45 GASKET AA1A33A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 46 BOLTING AA1A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 67/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA1A33A-01 ECP-VST-G-GEN-FT-001 68/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-106 CARBON STEEL, REQUIREMENTS AS PER NACE MR-01-03 DESIGN TEMPERATURE (°F): From: -20 To: 250 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 SOUR GAS FGA 150 272 ACID VAPORS ACU 200 260 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS AA1A53A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/4" FLANGE FINISH DATE: 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 69/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA1A53A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA1A53A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, F10 TRIM, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, HANDWHEEL 2 GATE VALVE AA1A53A-01 3 8 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, REQUIREMENTS AS PER NACE MR0103, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, F10 TRIM, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA1A53A-01 10 12 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, F10 TRIM, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA1A53A-01 1/2 2 800 SW CARBON STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, F10 TRIM, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT RINGS, . PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 5 CHECK VALVE AA1A53A-01 3 12 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, F10 TRIM, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE INTEGRAL SEAT RINGS, . 6 GLOBE VALVE AA1A53A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, F10 TRIM, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, HANDWHEEL 7 GLOBE VALVE AA1A53A-01 3 8 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, F10 TRIM, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE AA1A53A-01 10 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, F10 TRIM, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 BUTTERFLY VALVE AA1A53A-01 3 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, REQUIREMENTS AS PER NACE MR0103, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR ECP-VST-G-GEN-FT-001 70/761 PIPING CLASS CLASS: AA1A53A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 10 BUTTERFLY VALVE AA1A53A-01 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, REQUIREMENTS AS PER NACE MR0103, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 11 PIPE AA1A53A-01 1/2 1 1/2 PE XXS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, PLAIN ENDS 12 PIPE AA1A53A-01 2 3 BE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 13 PIPE AA1A53A-01 4 6 BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, BEVELED, , ENDS AS PER ASME B16.25 14 PIPE AA1A53A-01 8 10 BE 60 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 15 PIPE AA1A53A-01 12 12 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 45 DEGREES AA1A53A-01 1/2 1 1/2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 17 ELBOW 45 DEGREES AA1A53A-01 2 3 BW 160 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 45 DEGREES AA1A53A-01 4 6 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 45 DEGREES AA1A53A-01 8 10 BW 60 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 20 ELBOW 45 DEGREES AA1A53A-01 12 12 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 21 ELBOW 90 DEGREES AA1A53A-01 1/2 1 1/2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 22 ELBOW 90 DEGREES AA1A53A-01 2 3 BW 160 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 23 ELBOW 90 DEGREES AA1A53A-01 4 6 BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 24 ELBOW 90 DEGREES AA1A53A-01 8 10 BW 60 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 25 ELBOW 90 DEGREES AA1A53A-01 12 12 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 26 CONCENTRIC REDUCER AA1A53A-01 1/2 1 1/2 XXS CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR0103, PLAIN END, OR BEVELED END AS PER ASME B16.25 27 CONCENTRIC REDUCER AA1A53A-01 2 3 BW 160 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 28 CONCENTRIC REDUCER AA1A53A-01 4 6 BW 80 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 71/761 PIPING CLASS CLASS: AA1A53A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 29 CONCENTRIC REDUCER AA1A53A-01 8 10 BW 60 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 30 CONCENTRIC REDUCER AA1A53A-01 12 12 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 31 ECCENTRIC REDUCER AA1A53A-01 1/2 1 1/2 XXS CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR0103, PLAIN END, OR BEVELED END AS PER ASME B16.25 32 ECCENTRIC REDUCER AA1A53A-01 2 3 BW 160 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 33 ECCENTRIC REDUCER AA1A53A-01 4 6 BW 80 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 34 ECCENTRIC REDUCER AA1A53A-01 8 10 BW 60 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 35 ECCENTRIC REDUCER AA1A53A-01 12 12 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 36 CAP AA1A53A-01 1/2 1 1/2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 37 CAP AA1A53A-01 1/2 1 1/2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 38 CAP AA1A53A-01 2 3 BW 160 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 39 CAP AA1A53A-01 4 6 BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 40 CAP AA1A53A-01 8 10 BW 60 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 41 CAP AA1A53A-01 12 12 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 42 STRAIGHT AND REDUCER TEE AA1A53A-01 1/2 1 1/2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103 SOCKET WELDING ENDS AS PER ASME B16 11MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 43 STRAIGHT AND REDUCER TEE AA1A53A-01 2 3 BW 160 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 44 STRAIGHT AND REDUCER TEE AA1A53A-01 4 6 BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 45 STRAIGHT AND REDUCER TEE AA1A53A-01 8 10 BW 60 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 46 STRAIGHT AND REDUCER TEE AA1A53A-01 12 12 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 47 OLET AA1A53A-01 1/2 1 1/2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS- SP-97, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 48 OLET AA1A53A-01 2 3 BW 160 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 49 OLET AA1A53A-01 4 6 BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 50 OLET AA1A53A-01 8 10 BW 60 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 51 OLET AA1A53A-01 12 12 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR0103, BEVELED ENDS AS PER ASME B16.25 52 PLUG AA1A53A-01 1/2 1 1/2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 53 COUPLING AA1A53A-01 1/2 1 1/2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR0103, SOCKET WELDING ENDS AS PER ASME B16.11 54 NIPPLE AA1A53A-01 1/2 1 1/2 PE XXS CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR0103, PLAIN ENDS 55 FLANGE AA1A53A-01 1/2 1 1/2 150 RF XXS CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 72/761 PIPING CLASS CLASS: AA1A53A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 56 FLANGE AA1A53A-01 2 3 150 RF 160 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 57 FLANGE AA1A53A-01 4 6 150 RF 80 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 58 FLANGE AA1A53A-01 8 10 150 RF 60 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 59 FLANGE AA1A53A-01 12 12 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 60 BLIND FLANGE AA1A53A-01 1 1/2 12 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, REQUIREMENTS AS PER NACE MR0103, RAISED FACE FLANGED END 61 FIGURE 8 AA1A53A-01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR 70 DIMENSIONS AS PER ASME B16 5GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 62 DRIP RINGS AA1A53A-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 63 GASKET AA1A53A-01 1/2 12 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 64 BOLTING AA1A53A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 73/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA1A53A-01 ECP-VST-G-GEN-FT-001 74/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL WITH TEFLON LINER To: 257 DESIGN TEMPERATURE (°F): From: -20 To: 500 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 257 SULPHURIC ACID CONCENTRATED (93% TO 98%) CSA 150 245 200 234 300 207 400 180 500 153 O S PIPING CLASS AA103A-01 DATE: 5-oct-04 ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 1/100" FLANGE FINISH POR: Adolfo Triviño / Jaime AmadorCORROSION ALLOWANCE NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- RATINGS ARE LIMITED BY THE PLASTIC MATERIAL AS PER ASTM F-1545. LINERS MANUFACTURERS FOR PIPING USE THE PRESSURE RATINGS INDICATED IN THIS TABLE. 90% 150 300 600 900 1500 -20 to 100 257 666 1332 1998 3335 150 245 636 1274 1910 3186 200 234 608 1215 1823 3038 300 207 590 1184 1773 2952 400 180 572 1143 1710 2853 500 153 540 1080 1616 2696 100% 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 75/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA103A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA103A-01 1 2 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CN7M (A20), ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, HARDFACE SEATS, HANDWHEEL 2 GATE VALVE AA103A-01 3 12 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CN7M (A20), ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, HARDFACE SEATS, HANDWHEEL 3 CHECK VALVE AA103A-01 1 12 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CN7M (A20), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED COVER, HARDFACE SEATS, 4 GLOBE VALVE AA103A-01 1 8 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CN7M (A20), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, ALLOY 20 SWIVEL DISC PLUG TYPE, HARDFACE SEATS, HANDWHEEL 5 PLUG VALVE AA103A-01 1 2 150 RF STAINLESS STEEL, PLUG VALVE, ASTM A-351 GR. CN7M (A20), ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, ALLOY 20 PLUG, HARDFACE SEATS, HANDWHEEL 6 PLUG VALVE AA103A-01 3 12 150 RF STAINLESS STEEL, PLUG VALVE, ASTM A-351 GR. CN7M (A20), ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS RATING AS PER ASME B16 5 CONSTRUCTION AS PER ASME B16 34 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, ALLOY 20 PLUG, HARDFACE SEATS, HANDWHEEL 7 BALL VALVE AA103A-01 1 12 150 RF STAINLESS STEEL, BALL VALVE, ASTM A-351 GR. CN7M (A20), ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, ALLOY 20 TRIM, FLOATING BALL, ALLOY 20 BALL AND STEM, HANDWHEEL 8 PIPE AA103A-01 1 6 150 RF 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), DIMENSIONS AS PER ASME B36.10, WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 9 PIPE AA103A-01 8 12 150 RF 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), DIMENSIONS AS PER ASME B36.10, WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 10 ELBOW 45 DEGREES AA103A-01 1 6 150 RF 40 CARBON STEEL, FLANGED ELBOW 45 DEGREES, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 11 ELBOW 45 DEGREES AA103A-01 8 12 150 RF 20 CARBON STEEL, FLANGED ELBOW 45 DEGREES, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 12 ELBOW 90 DEGREES AA103A-01 1 6 150 RF 40 CARBON STEEL, FLANGED ELBOW 90 DEGREES, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 13 ELBOW 90 DEGREES AA103A-01 8 12 150 RF 20 CARBON STEEL, FLANGED ELBOW 90 DEGREES, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 14 CONCENTRIC REDUCER AA103A-01 1 6 150 RF 40 CARBON STEEL, FLANGED CONCENTRIC REDUCER, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 15 CONCENTRIC REDUCER AA103A-01 8 12 150 RF 20 CARBON STEEL, FLANGED CONCENTRIC REDUCER, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 16 ECCENTRIC REDUCER AA103A-01 1 6 150 RF 40 CARBON STEEL, FLANGED CONCENTRIC REDUCER, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 17 ECCENTRIC REDUCER AA103A-01 8 12 150 RF 20 CARBON STEEL, FLANGED CONCENTRIC REDUCER, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 18 STRAIGHT AND REDUCER TEE AA103A-01 1 6 150 RF 40 CARBON STEEL, FLANGED STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 19 STRAIGHT AND REDUCER TEE AA103A-01 8 12 150 RF 20 CARBON STEEL, FLANGED STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), WITH ASME B16.5 RATING 150# LAP JOINT FLANGES, MOLDED RAISED FACE 20 FLANGE AA103A-01 1 6 150 RF 40 CARBON STEEL, THREADED FLANGE (ONLY USED ON SPOOL PIECES ADJUSTMENT FOR FINAL CONNECTION TO FLANGED PIPE), ASTM A-105, DIMENSIONS AS PER ASME B16.5, MOLDED RAISED FACE FLANGED END 21 FLANGE AA103A-01 8 12 150 RF 20 CARBON STEEL, THREADED FLANGE (ONLY USED ON SPOOL PIECES ADJUSTMENT FOR FINAL CONNECTION TO FLANGED PIPE), ASTM A-105, DIMENSIONS AS PER ASME B16.5, MOLDED RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 76/761 PIPING CLASS CLASS: AA103A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 22 BLIND FLANGE AA103A-01 1 12 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105 WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), DIMENSIONS AS PER ASME B16.5, MOLDED RAISED FACE FLANGED END 23 FIGURE 8 AA103A-01 1 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70 WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), DIMENSIONS AS PER ASME B16.5, MOLDED RAISED FACE ENDS 24 DRIP RINGS AA103A-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70 WITH TEFLON LINER (0,125" MINIMUM THICKNESS LINER), DIMENSIONS AS PER ASME B16.5, MOLDED RAISED FACE ENDS 25 GASKET AA103A-01 1 12 150 FF SOFT IRON, GASKET, FLAT RING, THICKNESS 1/8" INCHES, GYLON 3000 MATERIAL (GARLOCK) OR EQUIVALENT, DIMENSIONS AS PER ASME B 16.5 & ASME B16 21& ASME B16.21 , 26 BOLTING AA103A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 77/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA103A-01 ECP-VST-G-GEN-FT-001 78/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 740 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES PIPING MATERIAL SPECIFICATION CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA2A23A-01 FLANGE FINISH DATE: 5-oct-04 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 AROMATIC HYDROCARBONS ARM 150 707 ASPHALT ASP 200 675 BLENDED CRUDE CRM 300 655 BOILER FEED WATER BFW 400 635 BUTHANE BUT 500 600 CHEMICALS QUI 600 550 CLARIFIED WATER CLW 650 535 CONDENSATE CND 700 535 COOLING WATER - RETURN CWR 750 505 COOLING WATER - SUPPLY CWS 800 410 CRUDE OIL CRU 850 270 CUPIAGUA CRUDE CUP 900 170 CUSIANA CRUDE CUS 950 105 DIESEL OIL “ACPM” DSO 1000 50 ETHANE ETA ETHYLENE ETI ECP-VST-G-GEN-FT-001 79/761 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 740 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 RF ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA2A23A-01 FLANGE FINISH DATE: 5-oct-04 FILTERED WATER TRW FIRE WATER FWA FLUE GAS FLU FUEL GAS FUG GASOLINE MOTOR EXTRA EXT GASOLINE MOTOR REGULAR COC GLYCOL GLY HEAVY NAPHTHA HGA INDUSTRIAL AIR UTA INSTRUMENT AIR INA KEROSENE KER LIGHT NAPHTHA LGA LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG MEDIUM PRESSURE STEAM MPS METHANOL MEL NAPHTHA NAP NITROGEN NIT POTABLE WATER PWA PROPANE PRY PROPYLENE PPN SOFTENED WATER SWA WASTE WATER WWT NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F ECP-VST-G-GEN-FT-001 80/761 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 740 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 RF ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA2A23A-01 FLANGE FINISH DATE: 5-oct-04 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 81/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA2A23A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL CÓDIGO CNE ECP-VST-P-MET-ET-006 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES , 2 GATE VALVE AA2A23A-01 3 12 300 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA2A23A-01 14 24 300 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR ECP-VST-G-GEN-FT-001 82/761 PIPING CLASS CLASS: AA2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 4 CHECK VALVE AA2A23A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA2A23A-01 3 24 300 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA2A23A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA2A23A-01 3 12 300 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 83/761 PIPING CLASS CLASS: AA2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 8 BUTTERFLY VALVE AA2A23A-01 3 12 300 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A- 216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 9 BUTTERFLY VALVE AA2A23A-01 14 24 300 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A- 216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 10 BALL VALVE AA2A23A-01 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 11 BALL VALVE AA2A23A-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 12 BALL VALVE AA2A23A-01 3 12 300 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A- 216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 13 BALL VALVE AA2A23A-01 14 24 300 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A- 216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 14 PLUG VALVE AA2A23A-01 3 12 300 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR ECP-VST-G-GEN-FT-001 84/761 PIPING CLASS CLASS: AA2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 15 PLUG VALVE AA2A23A-01 14 24 300 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 16 PIPE AA2A23A-01 1/2 2 PE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 17 PIPE AA2A23A-01 3 24 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 45 DEGREES AA2A23A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 19 ELBOW 45 DEGREES AA2A23A-01 3 24 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 ELBOW 90 DEGREES AA2A23A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 ELBOW 90 DEGREES AA2A23A-01 3 24 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 CONCENTRIC REDUCER AA2A23A-01 1/2 2 80 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 23 CONCENTRIC REDUCER AA2A23A-01 3 24 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ECCENTRIC REDUCER AA2A23A-01 1/2 2 80 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 25 ECCENTRIC REDUCER AA2A23A-01 3 24 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 85/761 PIPING CLASS CLASS: AA2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 26 REDUCER INSERT AA2A23A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 27 CAP AA2A23A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 CAP AA2A23A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 CAP AA2A23A-01 3 24 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE AA2A23A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 31 STRAIGHT AND REDUCER TEE AA2A23A-01 3 24 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 OLET AA2A23A-01 1/2 2 6000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 33 OLET AA2A23A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 34 OLET AA2A23A-01 3 24 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 35 PLUG AA2A23A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 36 COUPLING AA2A23A-01 1/2 2 6000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 37 COUPLING AA2A23A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 38 HALF COUPLING AA2A23A-01 1/2 2 6000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 86/761 PIPING CLASS CLASS: AA2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 39 HALF COUPLING AA2A23A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 40 NIPPLE AA2A23A-01 1/2 2 THD 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 41 NIPPLE AA2A23A-01 1/2 2 PE 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 42 FLANGE AA2A23A-01 1/2 2 300 RF 80 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 43 FLANGE AA2A23A-01 3 24 300 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 44 BLIND FLANGE AA2A23A-01 1/2 24 300 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 45 ORIFICE FLANGE AA2A23A-01 1 2 300 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. ECP-VST-G-GEN-FT-001 87/761 PIPING CLASS CLASS: AA2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 46 ORIFICE FLANGE AA2A23A-01 3 24 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 47 BLIND PLATE AA2A23A-01 14 24 300 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 48 SPACER RING AA2A23A-01 14 24 300 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 49 FIGURE 8 AA2A23A-01 1/2 12 300 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 50 DRIP RINGS AA2A23A-01 2 24 300 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 51 GASKET AA2A23A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 52 BOLTING AA2A23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 88/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA2A23A-01 ECP-VST-G-GEN-FT-001 89/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 740 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 AROMATIC HYDROCARBONS ARM 150 707 ASPHALT ASP 200 675 BOILER FEED WATER BFW 300 655 BUTHANE BUT PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AA2A33A-01 FLANGE FINISH DATE: 5-oct-04 400 635 CAUSTIC SODA CAU 500 600 CHEMICALS QUI 600 550 CONDENSATE CND 650 535 CRUDE OIL CRU 700 535 CYCLE OIL - HEAVY HCO 750 505 CYCLE OIL - LIGHT ALC 800 410 DECOKING STEAM DKS 850 270 DEMEX BOTTOMS FDX 900 170 DIESEL OIL “ACPM” DSO 950 105 ETHANE ETA 1000 50 ETHYLENE ETI GASOIL GLS GASOLINE MOTOR EXTRA EXT ECP-VST-G-GEN-FT-001 90/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 740 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AA2A33A-01 FLANGE FINISH DATE: 5-oct-04 GASOLINE MOTOR REGULAR COC GLYCOL GLY HEAVY GASOIL HGO HEAVY NAPHTHA HGA HIGH PRESSURE STEAM HPS HYDROGEN HYD HYDROTREATED NAPHTHA NHT KEROSENE KER LIGHT GASOIL LGO LIGHT NAPHTHA LGA LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG LOW PRESSURE CONDENSATE LPC LOW PRESSURE STEAM LPS MEDIUM PRESSURE STEAM MPS NATURAL GAS (350#) NTG METHANOL MEL NAPHTHA NAP NITROGEN NIT PLATFORMADO PLT POLYETHYLENE + ETHYLENE LPE ECP-VST-G-GEN-FT-001 91/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 740 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AA2A33A-01 FLANGE FINISH DATE: 5-oct-04 POTABLE WATER PWA PROPANE PRY PROPYLENE PPN QUENCH OIL QHO SOFTENED WATER SWA NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F ECP-VST-G-GEN-FT-001 92/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 740 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 750 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AA2A33A-01 FLANGE FINISH DATE: 5-oct-04 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 93/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA2A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA2A33A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA2A33A-01 3 12 300 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA2A33A-01 14 24 300 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA2A33A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER BOLTED CAP 316 SS BALL STELLITE PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA2A33A-01 3 24 300 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA2A33A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA2A33A-01 3 12 300 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BUTTERFLY VALVE AA2A33A-01 3 12 300 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 9 BUTTERFLY VALVE AA2A33A-01 14 24 300 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 10 BALL VALVE AA2A33A-01 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A- 105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR ECP-VST-G-GEN-FT-001 94/761 PIPING CLASS CLASS: AA2A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 11 BALL VALVE AA2A33A-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A- 105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 12 BALL VALVE AA2A33A-01 3 12 300 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 13 BALL VALVE AA2A33A-01 14 24 300 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 14 PLUG VALVE AA2A33A-01 3 12 300 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 15 PLUG VALVE AA2A33A-01 14 24 300 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 16 PIPE AA2A33A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 17 PIPE AA2A33A-01 3 24 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 45 DEGREES AA2A33A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16 11 SOCKET WELDING ENDS AS PER ASMEAS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 19 ELBOW 45 DEGREES AA2A33A-01 3 24 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 ELBOW 90 DEGREES AA2A33A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 ELBOW 90 DEGREES AA2A33A-01 3 24 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 CONCENTRIC REDUCER AA2A33A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 23 CONCENTRIC REDUCER AA2A33A-01 3 24 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ECCENTRIC REDUCER AA2A33A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 25 ECCENTRIC REDUCER AA2A33A-01 3 24 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 26 REDUCER INSERT AA2A33A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 27 CAP AA2A33A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 CAP AA2A33A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 CAP AA2A33A-01 3 24 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE AA2A33A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 31 STRAIGHT AND REDUCER TEE AA2A33A-01 3 24 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 OLET AA2A33A-01 1/2 2 6000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 33 OLET AA2A33A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 34 OLET AA2A33A-01 3 24 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 95/761 PIPING CLASS CLASS: AA2A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 35 PLUG AA2A33A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 36 COUPLING AA2A33A-01 1/2 2 6000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 37 COUPLING AA2A33A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 38 HALF COUPLING AA2A33A-01 1/2 2 6000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 39 HALF COUPLING AA2A33A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 40 NIPPLE AA2A33A-01 1/2 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 41 NIPPLE AA2A33A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 42 FLANGE AA2A33A-01 1/2 2 300 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 43 FLANGE AA2A33A-01 3 24 300 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 44 BLIND FLANGE AA2A33A-01 1/2 24 300 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 45 ORIFICE FLANGE AA2A33A-01 1 2 300 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 46 ORIFICE FLANGE AA2A33A-01 3 24 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A 194 GR 2H AND PLUGS ASTM A 105A-194 GR. 2H AND PLUGS ASTM A-105. 47 BLIND PLATE AA2A33A-01 14 24 300 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 48 SPACER RING AA2A33A-01 14 24 300 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 49 FIGURE 8 AA2A33A-01 1/2 12 300 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 50 DRIP RINGS AA2A33A-01 2 24 300 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 51 GASKET AA2A33A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 52 BOLTING AA2A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 96/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA2A33A-01 ECP-VST-G-GEN-FT-001 97/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 740 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 HYDROTREATED NAPHTHA NHT 150 707 HYDROTREATED NAPHTHA + HYDROGEN NHH 200 675 LIGHT NAPHTHA + HYDROGEN NAH 300 655 PLATFORMADO + HYDROGEN PLH 400 635 500 600 600 550 650 535 700 535 750 505 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA2B23A-01 FLANGE FINISH DATE: 5-oct-04 RTJ ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 800 410 850 270 900 170 950 105 1000 50 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 98/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA2B23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA2B23A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA2B23A-01 3 8 300 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA2B23A-01 10 24 300 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA2B23A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16 10 SOCKET WELDING ENDS AS PER ASME B16 11 CONSTRUCTION AS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA2B23A-01 3 24 300 RTJ CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA2B23A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA2B23A-01 3 8 300 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE AA2B23A-01 10 12 300 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE AA2B23A-01 1/2 2 PE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE AA2B23A-01 3 24 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES AA2B23A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES AA2B23A-01 3 24 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 99/761 PIPING CLASS CLASS: AA2B23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 13 ELBOW 90 DEGREES AA2B23A-01 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES AA2B23A-01 3 24 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER AA2B23A-01 1/2 2 80 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER AA2B23A-01 3 24 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER AA2B23A-01 1/2 2 80 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER AA2B23A-01 3 24 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 REDUCER INSERT AA2B23A-01 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP AA2B23A-01 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 21 CAP AA2B23A-01 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 CAP AA2B23A-01 3 24 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 STRAIGHT AND REDUCER TEE AA2B23A-01 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 24 STRAIGHT AND REDUCER TEE AA2B23A-01 3 24 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 OLET AA2B23A-01 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16 11SOCKET WELDING ENDS AS PER ASME B16.11 26 OLET AA2B23A-01 3 24 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 27 PLUG AA2B23A-01 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING AA2B23A-01 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING AA2B23A-01 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 30 NIPPLE AA2B23A-01 1/2 2 PE 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 31 FLANGE AA2B23A-01 1/2 2 300 RTJ 80 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 32 FLANGE AA2B23A-01 3 24 300 RTJ 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 33 BLIND FLANGE AA2B23A-01 1/2 24 300 RTJ CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 34 ORIFICE FLANGE AA2B23A-01 1 2 300 RTJ 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105., RING JOINT FLANGED END 35 ORIFICE FLANGE AA2B23A-01 3 24 300 RTJ 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105., RING JOINT FLANGED END 36 FIGURE 8 AA2B23A-01 1/2 12 300 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 37 BLIND PLATE AA2B23A-01 14 24 300 RTJ CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 38 SPACER RING AA2B23A-01 14 24 300 RTJ CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 39 DRIP RINGS AA2B23A-01 2 24 300 RTJ CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 40 GASKET AA2B23A-01 1/2 24 300 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 41 BOLTING AA2B23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 100/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA2B23A-01 ECP-VST-G-GEN-FT-001 101/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 1480 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 800 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1480 ETHANE ETA 150 1415 ETHYLENE ETI 200 1350 METHANOL MEL 300 1315 PROPYLENE PPN 400 1270 BOILER FEED WATER BFW 500 1200 POLYETHYLENE + ETHYLENE LPE 600 1095 HIGH PRESSURE STEAM HPS 650 1075 700 1065 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AA3A33A-01 FLANGE FINISH DATE: 5-oct-04 RF PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING 750 1010 800 825 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 102/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA3A33A-01 3 GATE VALVE AA3A33A-01 14 24 600 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA3A33A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA3A33A-01 3 24 600 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA3A33A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA3A33A-01 3 12 600 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE HANDWHEEL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 PRESSURE, HANDWHEEL 8 BALL VALVE AA3A33A-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 9 BALL VALVE AA3A33A-01 3 12 600 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A- 216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 10 BALL VALVE AA3A33A-01 14 24 600 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A- 216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 11 PLUG VALVE AA3A33A-01 3 12 600 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 12 PLUG VALVE AA3A33A-01 14 24 600 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 13 PIPE AA3A33A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 14 PIPE AA3A33A-01 3 24 BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES AA3A33A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 45 DEGREES AA3A33A-01 3 24 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES AA3A33A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 18 ELBOW 90 DEGREES AA3A33A-01 3 24 BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CONCENTRIC REDUCER AA3A33A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 20 CONCENTRIC REDUCER AA3A33A-01 3 24 BW 80 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER AA3A33A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER AA3A33A-01 3 24 BW 80 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 REDUCER INSERT AA3A33A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 103/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 24 CAP AA3A33A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 25 CAP AA3A33A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 26 CAP AA3A33A-01 3 24 BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 STRAIGHT AND REDUCER TEE AA3A33A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 STRAIGHT AND REDUCER TEE AA3A33A-01 3 24 BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 OLET AA3A33A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 30 OLET AA3A33A-01 3 24 BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 31 PLUG AA3A33A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 32 COUPLING AA3A33A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 33 HALF COUPLING AA3A33A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 34 NIPPLE AA3A33A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 35 FLANGE AA3A33A-01 1/2 2 600 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 36 FLANGE AA3A33A-01 3 24 600 RF 80 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 37 BLIND FLANGE AA3A33A-01 1/2 24 600 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 38 ORIFICE FLANGE AA3A33A-01 1 2 600 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 39 ORIFICE FLANGE AA3A33A-01 3 24 600 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 40 BLIND PLATE AA3A33A-01 14 24 600 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 41 SPACER RING AA3A33A-01 14 24 600 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 42 FIGURE 8 AA3A33A-01 1/2 12 600 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 43 DRIP RINGS AA3A33A-01 2 24 600 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 44 GASKET AA3A33A-01 1/2 24 600 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 45 BOLTING AA3A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 104/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA3A33A-01 ECP-VST-G-GEN-FT-001 105/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 1480 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1480 HIGH PRESSURE STEAM HPS 150 1415 200 1350 300 1315 400 1270 500 1200 600 1095 650 1075 700 1065 750 1010 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA3B23A-01 FLANGE FINISH DATE: 5-oct-04 RTJ 800 825 850 535 900 345 950 205 1000 105 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 106/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA3B23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA3B23A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA3B23A-01 3 6 600 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA3B23A-01 8 24 600 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA3B23A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A- 105, DIMENSIONS AS PER ASME B16.10, SOCKET PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA3B23A-01 3 24 600 RTJ CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA3B23A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 107/761 PIPING CLASS CLASS: AA3B23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 7 GLOBE VALVE AA3B23A-01 3 6 600 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE AA3B23A-01 8 12 600 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE AA3B23A-01 1/2 2 PE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE AA3B23A-01 3 24 BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES AA3B23A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES AA3B23A-01 3 24 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES AA3B23A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES AA3B23A-01 3 24 BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER AA3B23A-01 1/2 2 80 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER AA3B23A-01 3 24 BW 80 CARBON STEEL CONCENTRIC REDUCER ASTM A 234 GR16 CONCENTRIC REDUCER AA3B23A-01 3 24 BW 80 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER AA3B23A-01 1/2 2 80 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER AA3B23A-01 3 24 BW 80 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 REDUCER INSERT AA3B23A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP AA3B23A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 21 CAP AA3B23A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 CAP AA3B23A-01 3 24 BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 STRAIGHT AND REDUCER TEE AA3B23A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 24 STRAIGHT AND REDUCER TEE AA3B23A-01 3 24 BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 OLET AA3B23A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 26 OLET AA3B23A-01 3 24 BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 108/761 PIPING CLASS CLASS: AA3B23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 27 PLUG AA3B23A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING AA3B23A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING AA3B23A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 30 NIPPLE AA3B23A-01 1/2 2 PE 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 31 FLANGE AA3B23A-01 1/2 2 600 RTJ 80 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 32 FLANGE AA3B23A-01 3 24 600 RTJ 80 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 33 BLIND FLANGE AA3B23A-01 1/2 24 600 RTJ CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 34 ORIFICE FLANGE AA3B23A-01 1 24 600 RTJ 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITHFLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 35 FIGURE 8 AA3B23A-01 1/2 12 600 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 36 BLIND PLATE AA3B23A-01 14 24 600 RTJ CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 37 SPACER RING AA3B23A-01 14 24 600 RTJ CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 38 DRIP RINGS AA3B23A-01 2 24 600 RTJ CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 39 GASKET AA3B23A-01 1/2 24 600 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 40 BOLTING AA3B23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 109/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA3B23A-01 ECP-VST-G-GEN-FT-001 110/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 1480 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1480 HIGH PRESSURE STEAM HPS 150 1415 ETHYLENE GAS ETI 200 1350 300 1315 400 1270 500 1200 600 1095 650 1075 700 1065 750 1010 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AA3B33A-01 FLANGE FINISH DATE: 5-oct-04 RTJ PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING 800 825 850 535 900 345 950 205 1000 105 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 111/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA3B33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA3B33A-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA3B33A-01 3 6 600 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA3B33A-01 8 24 600 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA3B33A-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA3B33A-01 3 24 600 RTJ CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA3B33A-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16 10 SOCKET WELDING ENDS AS PER ASME B16 11 CONSTRUCTION AS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA3B33A-01 3 6 600 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE AA3B33A-01 8 12 600 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE AA3B33A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE AA3B33A-01 3 24 BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES AA3B33A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES AA3B33A-01 3 24 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES AA3B33A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES AA3B33A-01 3 24 BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER AA3B33A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER AA3B33A-01 3 24 BW 80 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER AA3B33A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER AA3B33A-01 3 24 BW 80 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 112/761 PIPING CLASS CLASS: AA3B33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 19 REDUCER INSERT AA3B33A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP AA3B33A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 21 CAP AA3B33A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 CAP AA3B33A-01 3 24 BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 STRAIGHT AND REDUCER TEE AA3B33A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 24 STRAIGHT AND REDUCER TEE AA3B33A-01 3 24 BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 OLET AA3B33A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING ENDS AS PER ASME B16.11 26 OLET AA3B33A-01 3 24 BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 27 PLUG AA3B33A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING AA3B33A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING AA3B33A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 30 NIPPLE AA3B33A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 31 FLANGE AA3B33A-01 1/2 2 600 RTJ 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 32 FLANGE AA3B33A-01 3 24 600 RTJ 80 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED ENDPER ASME B16.5, RING JOINT FLANGED END 33 BLIND FLANGE AA3B33A-01 1/2 24 600 RTJ CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 34 ORIFICE FLANGE AA3B33A-01 1 2 600 RTJ 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 35 ORIFICE FLANGE AA3B33A-01 3 24 600 RTJ 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 36 FIGURE 8 AA3B33A-01 1/2 12 600 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 37 BLIND PLATE AA3B33A-01 14 24 600 RTJ CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 38 SPACER RING AA3B33A-01 14 24 600 RTJ CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 39 DRIP RINGS AA3B33A-01 2 24 600 RTJ CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 40 GASKET AA3B33A-01 1/2 24 600 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 41 BOLTING AA3B33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 113/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA3B33A-01 ECP-VST-G-GEN-FT-001 114/761 Elaborado 25/03/2011 CLASS 900 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 2220 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 2220 ETHYLENE GAS ETI 150 2122 POLYETHYLENE + ETHYLENE LPE 200 2025 LIQUID POLYETHYLENE LP 300 1970 400 1900 500 1795 600 1640 650 1610 700 1600 750 1510 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RTJ ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA4B23A-01 FLANGE FINISH DATE: 5-oct-04 800 1235 850 805 900 515 950 310 1000 155 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 115/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA4B23A-01 Ite m PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA4B23A-01 1/2 2 1500 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA4B23A-01 3 4 900 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA4B23A-01 6 12 900 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER BOLTED BONNET OUTSIDE SCREW AND PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA4B23A-01 1/2 2 1500 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA4B23A-01 3 12 900 RTJ CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA4B23A-01 1/2 2 1500 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA4B23A-01 3 4 900 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 116/761 PIPING CLASS CLASS: AA4B23A-01 Ite m PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 8 GLOBE VALVE AA4B23A-01 6 12 900 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE AA4B23A-01 1/2 2 PE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE AA4B23A-01 3 - BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 PIPE AA4B23A-01 4 12 BE 120 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES AA4B23A-01 1/2 2 6000 SW 80 CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES AA4B23A-01 3 - BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 45 DEGREES AA4B23A-01 4 12 BW 120 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 90 DEGREES AA4B23A-01 1/2 2 6000 SW 80 CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 90 DEGREES AA4B23A-01 3 - BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES AA4B23A-01 4 12 BW 120 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 CONCENTRIC REDUCER AA4B23A-01 1/2 2 80 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 19 CONCENTRIC REDUCER AA4B23A-01 3 - BW 80 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER AA4B23A-01 4 12 BW 120 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER AA4B23A-01 1/2 2 80 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER AA4B23A-01 3 - BW 80 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER AA4B23A-01 4 12 BW 120 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 REDUCER INSERT AA4B23A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 25 CAP AA4B23A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 26 CAP AA4B23A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 117/761 PIPING CLASS CLASS: AA4B23A-01 Ite m PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 27 CAP AA4B23A-01 3 - BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 CAP AA4B23A-01 4 12 BW 120 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 STRAIGHT AND REDUCER TEE AA4B23A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 30 STRAIGHT AND REDUCER TEE AA4B23A-01 3 - BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 STRAIGHT AND REDUCER TEE AA4B23A-01 4 12 BW 120 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 OLET AA4B23A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 33 OLET AA4B23A-01 3 - BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 34 OLET AA4B23A-01 4 12 BW 120 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 35 PLUG AA4B23A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 36 COUPLING AA4B23A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 37 HALF COUPLING AA4B23A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16 11 SOCKET WELDING ENDS AS PER ASMEAS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 38 NIPPLE AA4B23A-01 1/2 2 PE CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 39 FLANGE AA4B23A-01 1/2 2 1500 RTJ CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 40 FLANGE AA4B23A-01 3 12 900 RTJ CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 41 BLIND FLANGE AA4B23A-01 1/2 2 1500 RTJ CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 42 BLIND FLANGE AA4B23A-01 3 12 900 RTJ CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 43 ORIFICE FLANGE AA4B23A-01 1 2 1500 RTJ 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 44 ORIFICE FLANGE AA4B23A-01 3 - 900 RTJ 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END ECP-VST-G-GEN-FT-001 118/761 PIPING CLASS CLASS: AA4B23A-01 Ite m PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 45 ORIFICE FLANGE AA4B23A-01 4 12 900 RTJ 120 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 46 FIGURE 8 AA4B23A-01 1/2 2 1500 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 47 FIGURE 8 AA4B23A-01 3 12 900 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 48 DRIP RINGS AA4B23A-01 3 12 900 RTJ CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 49 GASKET AA4B23A-01 1/2 2 1500 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 50 GASKET AA4B23A-01 3 12 900 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 51 BOLTING AA4B23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 119/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA4B23A-01 ECP-VST-G-GEN-FT-001 120/761 Elaborado 25/03/2011 CLASS 1500 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 3705 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 3705 ETHYLENE GAS ETI 150 3540 200 3375 300 3280 400 3170 500 2995 600 2735 650 2685 700 2665 750 2520 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RTJ ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/100" PIPING CLASS AA5B03A-01 FLANGE FINISH DATE: 5-oct-04 800 2060 850 1340 900 860 950 515 1000 260 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 121/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA5B03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA5B03A-01 1/2 2 1500 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA5B03A-01 3 8 1500 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 CHECK VALVE AA5B03A-01 1/2 2 1500 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 4 CHECK VALVE AA5B03A-01 3 8 1500 RTJ CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 5 GLOBE VALVE AA5B03A-01 1/2 2 1500 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 6 GLOBE VALVE AA5B03A-01 3 8 1500 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 PIPE AA5B03A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 8 PIPE AA5B03A-01 3 8 BE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 9 ELBOW 45 DEGREES AA5B03A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 10 ELBOW 45 DEGREES AA5B03A-01 3 8 BW 160 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 90 DEGREES AA5B03A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 90 DEGREES AA5B03A-01 3 8 BW 160 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 CONCENTRIC REDUCER AA5B03A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 14 CONCENTRIC REDUCER AA5B03A-01 3 8 BW 160 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ECCENTRIC REDUCER AA5B03A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 ECCENTRIC REDUCER AA5B03A-01 3 8 BW 160 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 REDUCER INSERT AA5B03A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 122/761 PIPING CLASS CLASS: AA5B03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 18 CAP AA5B03A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 19 CAP AA5B03A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP AA5B03A-01 3 8 BW 160 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 STRAIGHT AND REDUCER TEE AA5B03A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 STRAIGHT AND REDUCER TEE AA5B03A-01 3 8 BW 160 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 OLET AA5B03A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 24 OLET AA5B03A-01 3 8 BW CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 25 PLUG AA5B03A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 26 COUPLING AA5B03A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 27 HALF COUPLING AA5B03A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE AA5B03A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE AA5B03A-01 1/2 2 1500 RTJ 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 30 FLANGE AA5B03A-01 3 8 1500 RTJ 160 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 31 BLIND FLANGE AA5B03A-01 1/2 8 1500 RTJ CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 32 ORIFICE FLANGE AA5B03A-01 1 2 1500 RTJ 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. RING JOINT END. 33 ORIFICE FLANGE AA5B03A-01 3 8 1500 RTJ 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. RING JOINT END. 34 FIGURE 8 AA5B03A-01 1/2 8 1500 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 35 DRIP RINGS AA5B03A-01 3 8 1500 RTJ CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 36 GASKET AA5B03A-01 1/2 8 1500 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 37 BOLTING AA5B03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 123/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA5B03A-01 ECP-VST-G-GEN-FT-001 124/761 Elaborado 25/03/2011 CLASS 1500 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 3705 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 3705 ETHYLENE GAS ETI 150 3540 POLYETHYLENE + ETHYLENE LPE 200 3375 LIQUID POLYETHYLENE LP 300 3280 400 3170 500 2995 600 2735 650 2685 700 2665 750 2520 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RTJ ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AA5B23A-01 FLANGE FINISH DATE: 5-oct-04 750 2520 800 2060 850 1340 900 860 950 515 1000 260 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 125/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA5B23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA5B23A-01 1/2 2 1500 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA5B23A-01 3 4 1500 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA5B23A-01 6 12 1500 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA5B23A-01 1/2 2 1500 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION ASTM A 105 DIMENSIONS AS PER ASME PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA5B23A-01 3 12 1500 RTJ CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA5B23A-01 1/2 2 1500 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA5B23A-01 3 4 1500 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE AA5B23A-01 6 12 1500 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE AA5B23A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE AA5B23A-01 3 12 BE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES AA5B23A-01 1/2 2 6000 SW 160 CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES AA5B23A-01 3 12 BW 160 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 126/761 PIPING CLASS CLASS: AA5B23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 13 ELBOW 90 DEGREES AA5B23A-01 1/2 2 6000 SW 160 CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES AA5B23A-01 3 12 BW 160 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER AA5B23A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER AA5B23A-01 3 12 BW 160 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER AA5B23A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER AA5B23A-01 3 12 BW 160 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 REDUCER INSERT AA5B23A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP AA5B23A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 21 CAP AA5B23A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 CAP AA5B23A-01 3 12 BW 160 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 STRAIGHT AND REDUCER TEE AA5B23A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 24 STRAIGHT AND REDUCER TEE AA5B23A-01 3 12 BW 160 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 OLET AA5B23A 01 1/2 2 6000 SW CARBON STEEL SOCKOLET ASTM A 105 DIMENSIONS AS PER MSS SP 9725 OLET AA5B23A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 26 OLET AA5B23A-01 3 12 BW 160 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 27 PLUG AA5B23A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING AA5B23A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING AA5B23A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 30 NIPPLE AA5B23A-01 1/2 2 PE CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 31 FLANGE AA5B23A-01 1/2 12 1500 RTJ 160 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 32 BLIND FLANGE AA5B23A-01 1/2 12 1500 RTJ 160 CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 33 ORIFICE FLANGE AA5B23A-01 1 2 1500 RTJ 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 34 ORIFICE FLANGE AA5B23A-01 3 12 1500 RTJ 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 35 FIGURE 8 AA5B23A-01 1/2 12 1500 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 36 DRIP RINGS AA5B23A-01 2 12 1500 RTJ CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 37 GASKET AA5B23A-01 1/2 12 1500 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 38 BOLTING AA5B23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 127/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA5B23A-01 ECP-VST-G-GEN-FT-001 128/761 Elaborado 25/03/2011 CLASS 2500 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 6170 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 2500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 6170 ETHYLENE GAS ETI 150 5897 POLYETHYLENE + ETHYLENE LPE 200 5625 LIQUID POLYETHYLENE LP 300 5470 400 5280 500 4990 600 4560 650 4475 700 4440 750 4200 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/100" PIPING CLASS AA6B03A-01 FLANGE FINISH DATE: 5-oct-04 RTJ 800 3430 850 2230 900 1430 950 860 1000 430 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 2500 -20 to 100 285 740 1480 2220 6170 150 272 707 1415 2122 5897 200 260 675 1350 2025 5625 300 230 655 1315 1970 5470 400 200 635 1270 1900 5280 500 170 600 1200 1795 4990 600 140 550 1095 1640 4560 650 125 535 1075 1610 4475 700 110 535 1065 1600 4440 750 95 505 1010 1510 4200 800 80 410 825 1235 3430 850 65 270 535 805 2230 900 50 170 345 515 1430 950 35 105 205 310 860 1000 20 50 105 155 430 ECP-VST-G-GEN-FT-001 129/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA6B03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA6B03A-01 1/2 2 2500 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA6B03A-01 3 - 2500 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 CHECK VALVE AA6B03A-01 1/2 2 2500 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 4 CHECK VALVE AA6B03A-01 3 - 2500 RTJ CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 , 5 GLOBE VALVE AA6B03A-01 1/2 2 2500 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 6 GLOBE VALVE AA6B03A-01 3 - 2500 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 PIPE AA6B03A-01 1/2 2 PE XXS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 8 PIPE AA6B03A-01 3 - BE XXS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 9 ELBOW 45 DEGREES AA6B03A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 10 ELBOW 45 DEGREES AA6B03A-01 3 - BW XXS CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 90 DEGREES AA6B03A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 90 DEGREES AA6B03A-01 3 - BW XXS CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 CONCENTRIC REDUCER AA6B03A-01 1/2 2 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 14 CONCENTRIC REDUCER AA6B03A-01 3 - BW XXS CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ECCENTRIC REDUCER AA6B03A-01 1/2 2 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 ECCENTRIC REDUCER AA6B03A-01 3 - BW XXS CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 REDUCER INSERT AA6B03A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 130/761 PIPING CLASS CLASS: AA6B03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 18 CAP AA6B03A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 19 CAP AA6B03A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP AA6B03A-01 3 - BW XXS CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 STRAIGHT AND REDUCER TEE AA6B03A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 STRAIGHT AND REDUCER TEE AA6B03A-01 3 - BW XXS CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 OLET AA6B03A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 24 OLET AA6B03A-01 3 - BW XXS CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 25 PLUG AA6B03A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 26 COUPLING AA6B03A-01 1/2 2 6000 SW XXS CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 27 HALF COUPLING AA6B03A-01 1/2 2 6000 SW XXS CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE AA6B03A-01 1/2 2 PE XXS CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE AA6B03A-01 1/2 2 2500 RTJ XXS CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 30 FLANGE AA6B03A-01 3 - 2500 RTJ XXS CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 31 BLIND FLANGE AA6B03A-01 1/2 3 2500 RTJ XXS CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 32 ORIFICE FLANGE AA6B03A-01 1 2 2500 RTJ XXS CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTSCOMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 33 ORIFICE FLANGE AA6B03A-01 3 - 2500 RTJ XXS CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 34 FIGURE 8 AA6B03A-01 1/2 3 2500 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 35 DRIP RINGS AA6B03A-01 2 3 2500 RTJ CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 36 GASKET AA6B03A-01 1/2 3 2500 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 37 BOLTING AA6B03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 131/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA6B03A-01 ECP-VST-G-GEN-FT-001 132/761 Elaborado 25/03/2011 CLASS 2500 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 6170 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 2500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 3600 ETHYLENE GAS ETI 550 3600 POLYETHYLENE + ETHYLENE LPE LIQUID POLYETHYLENE LP NOTES: 1.- DESIGN LIMITS ACCORDING TO POLYETHYLENE PIPING CLASS SUPPLIED BY ECOPETROL. 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/100" PIPING CLASS AA6B03A-01 FLANGE FINISH DATE: 5-oct-04 RTJ PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING 150 300 600 900 2500 REDUCIDO A PRESIÓN ECP -20 to 100 285 740 1480 2220 4651 150 272 707 1415 2122 200 260 675 1350 2025 300 230 655 1315 1970 400 200 635 1270 1900 500 170 600 1200 1795 550 3600 600 140 550 1095 1640 650 125 535 1075 1610 700 110 535 1065 1600 750 95 505 1010 1510 800 80 410 825 1235 850 65 270 535 805 900 50 170 345 515 950 35 105 205 310 1000 20 50 105 155 ECP-VST-G-GEN-FT-001 133/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AA6B03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AA6B03A-01 1/2 2 2500 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA6B03A-01 3 6 2500 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AA6B03A-01 8 12 2500 RTJ CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AA6B03A-01 1/2 2 2500 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AA6B03A-01 3 12 2500 RTJ CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AA6B03A 01 1/2 2 2500 SW CARBON STEEL GLOBE VALVE ASTM A 105 DIMENSIONS AS PER ASME PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 6 GLOBE VALVE AA6B03A-01 1/2 2 2500 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AA6B03A-01 3 6 2500 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE AA6B03A-01 8 12 2500 RTJ CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE AA6B03A-01 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE AA6B03A-01 3 12 BE XXS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES AA6B03A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES AA6B03A-01 3 12 BW XXS CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES AA6B03A-01 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES AA6B03A-01 3 12 BW XXS CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER AA6B03A-01 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER AA6B03A-01 3 12 BW XXS CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER AA6B03A-01 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER AA6B03A-01 3 12 BW XXS CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 134/761 PIPING CLASS CLASS: AA6B03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 19 REDUCER INSERT AA6B03A-01 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP AA6B03A-01 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 21 CAP AA6B03A-01 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 CAP AA6B03A-01 3 12 BW XXS CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 STRAIGHT AND REDUCER TEE AA6B03A-01 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 24 STRAIGHT AND REDUCER TEE AA6B03A-01 3 12 BW XXS CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 OLET AA6B03A-01 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING ENDS AS PER ASME B16.11 26 OLET AA6B03A-01 3 12 BW XXS CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 27 PLUG AA6B03A-01 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING AA6B03A-01 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING AA6B03A-01 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 30 NIPPLE AA6B03A-01 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 31 FLANGE AA6B03A-01 1/2 2 2500 RTJ 160 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 32 FLANGE AA6B03A-01 3 12 2500 RTJ XXS CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 33 BLIND FLANGE AA6B03A-01 1/2 12 2500 RTJ CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 34 ORIFICE FLANGE AA6B03A-01 1 2 2500 RTJ 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 35 ORIFICE FLANGE AA6B03A-01 3 12 2500 RTJ XXS CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, CO S C G C SC S O S S GCOMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105, RING JOINT FLANGED END 36 FIGURE 8 AA6B03A-01 1/2 12 2500 RTJ CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 37 DRIP RINGS AA6B03A-01 2 12 2500 RTJ CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 38 GASKET AA6B03A-01 1/2 12 2500 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 39 BOLTING AA6B03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 135/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AA6B03A-01 ECP-VST-G-GEN-FT-001 136/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL - KILLED To: 285 ASTM A-350 GR. LF2 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 BUTHANE BUT 150 272 CHEMICALS QUI 200 260 LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG 300 230 LIGHT NAPHTHA LGA 400 200 500 170 600 140 650 125 700 110 750 95 800 80 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AB1A23A-01 FLANGE FINISH DATE: 5-oct-04 RF PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF2, NOT RECOMMENDED FOR PROLONGED USE ABOVE 800 °F, THE CARBIDE PHASE OF STEEL MAY BE CONVERTED TO GRAPHITE. 3.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 137/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AB1A23A-01 1/2 2 800 SW KILLED CARBON STEEL, GATE VALVE, ASTM A-350 GR. LF2, ACCORDING TO API 602, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AB1A23A-01 3 12 150 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AB1A23A-01 14 24 150 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AB1A23A-01 1/2 2 800 SW KILLED CARBON STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS PISTON, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AB1A23A-01 3 24 150 RF KILLED CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01- 75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AB1A23A-01 1/2 2 800 SW KILLED CARBON STEEL, GLOBE VALVE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AB1A23A-01 3 12 150 RF KILLED CARBON STEEL, GLOBE VALVE, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BALL VALVE AB1A23A-01 1/2 2 800 SW KILLED CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-350 GR. LF2, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 9 BALL VALVE AB1A23A-01 3 12 150 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 10 BALL VALVE AB1A23A-01 14 24 150 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR ECP-VST-G-GEN-FT-001 138/761 PIPING CLASS CLASS: AB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 11 PLUG VALVE AB1A23A-01 3 12 150 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 12 PLUG VALVE AB1A23A-01 14 24 150 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 13 PIPE AB1A23A-01 1/2 2 PE 80 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, PLAIN ENDS 14 PIPE AB1A23A-01 3 8 BE 40 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 15 PIPE AB1A23A-01 10 24 BE 20 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 45 DEGREES AB1A23A-01 1/2 2 3000 SW KILLED CARBON STEEL, ELBOW 45 DEGREES, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11 17 ELBOW 45 DEGREES AB1A23A-01 3 8 BW 40 KILLED CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 45 DEGREES AB1A23A-01 10 24 BW 20 KILLED CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 90 DEGREES AB1A23A-01 1/2 2 3000 SW KILLED CARBON STEEL, ELBOW 90 DEGREES, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11 20 ELBOW 90 DEGREES AB1A23A-01 3 8 BW 40 KILLED CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 21 ELBOW 90 DEGREES AB1A23A-01 10 24 BW 20 KILLED CARBON STEEL ELBOW 90 DEGREES LONG RADIUS ASTM A-42021 ELBOW 90 DEGREES AB1A23A-01 10 24 BW 20 KILLED CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 22 CONCENTRIC REDUCER AB1A23A-01 1/2 2 80 KILLED CARBON STEEL, CONCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 23 CONCENTRIC REDUCER AB1A23A-01 3 8 BW 40 KILLED CARBON STEEL, CONCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01- 75, BEVELED ENDS AS PER ASME B16.25 24 CONCENTRIC REDUCER AB1A23A-01 10 24 BW 20 KILLED CARBON STEEL, CONCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01- 75, BEVELED ENDS AS PER ASME B16.25 25 ECCENTRIC REDUCER AB1A23A-01 1/2 2 80 KILLED CARBON STEEL, ECCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR-01-75, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 26 ECCENTRIC REDUCER AB1A23A-01 3 8 BW 40 KILLED CARBON STEEL, ECCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01- 75, BEVELED ENDS AS PER ASME B16.25 27 ECCENTRIC REDUCER AB1A23A-01 10 24 BW 20 KILLED CARBON STEEL, ECCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01- 75, BEVELED ENDS AS PER ASME B16.25 28 CAP AB1A23A-01 1/2 2 3000 THD KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 29 CAP AB1A23A-01 1/2 2 3000 SW KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 30 CAP AB1A23A-01 3 8 BW 40 KILLED CARBON STEEL, CAP, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 31 CAP AB1A23A-01 10 24 BW 20 KILLED CARBON STEEL, CAP, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 32 STRAIGHT AND REDUCER TEE AB1A23A-01 1/2 2 3000 SW KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR- 01-75, SOCKET WELDING ENDS AS PER ASME B16.11 33 STRAIGHT AND REDUCER TEE AB1A23A-01 3 8 BW 40 KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 34 STRAIGHT AND REDUCER TEE AB1A23A-01 10 24 BW 20 KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 35 OLET AB1A23A-01 1/2 2 3000 SW KILLED CARBON STEEL, SOCKOLET, ASTM A-350 GR. LF2, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 36 OLET AB1A23A-01 3 8 BW 40 KILLED CARBON STEEL, WELDOLET, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 37 OLET AB1A23A-01 10 24 BW 20 KILLED CARBON STEEL, WELDOLET, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 38 PLUG AB1A23A-01 1/2 2 3000 THD KILLED CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, MALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 139/761 PIPING CLASS CLASS: AB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 39 COUPLING AB1A23A-01 1/2 2 3000 SW KILLED CARBON STEEL, COUPLING, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 40 NIPPLE AB1A23A-01 1/2 2 PE 80 KILLED CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01- 75, PLAIN ENDS 41 FLANGE AB1A23A-01 1/2 2 150 RF 80 KILLED CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 42 FLANGE AB1A23A-01 3 8 150 RF 40 KILLED CARBON STEEL, WELDING NECK FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 43 FLANGE AB1A23A-01 10 24 150 RF 20 KILLED CARBON STEEL, WELDING NECK FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 44 BLIND FLANGE AB1A23A-01 1/2 24 150 RF KILLED CARBON STEEL, BLIND FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 45 ORIFICE FLANGE AB1A23A-01 1 1/2 2 300 RF 80 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 46 ORIFICE FLANGE AB1A23A-01 3 8 300 RF 40 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 47 ORIFICE FLANGE AB1A23A-01 10 24 300 RF 20 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 48 BLIND PLATE AB1A23A-01 14 24 150 RF KILLED CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 49 SPACER RING AB1A23A-01 14 24 150 RF KILLED CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 50 FIGURE 8 AB1A23A-01 1/2 12 150 RF KILLED CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16 5 RAISED FACE ENDSAS PER ASME B16.5, RAISED FACE ENDS 51 DRIP RINGS AB1A23A-01 2 24 150 RF KILLED CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 52 GASKET AB1A23A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, SS316 INNER RING, THICKNESS 1/8" INCHES, AISI 316 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 53 BOLTING AB1A23A-01 KILLED CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7M / ASTM A 194 GR. 2HM, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 140/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AB1A23A-01 ECP-VST-G-GEN-FT-001 141/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL - KILLED To: 285 ASTM A-350 GR. LF2 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 ETHYLENE ETI 150 272 POLYETHYLENE POL 200 260 ETHANE ETA 300 230 METHANOL MEL 400 200 PROPYLENE PPN 500 170 600 140 650 125 700 110 750 95 800 80 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AB1A33A-01 FLANGE FINISH DATE: 5-oct-04 RF PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING 800 80 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF2, NOT RECOMMENDED FOR PROLONGED USE ABOVE 800 °F, THE CARBIDE PHASE OF STEEL MAY BE CONVERTED TO GRAPHITE. 3.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 142/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AB1A33A-01 1/2 2 800 SW KILLED CARBON STEEL, GATE VALVE, ASTM A-350 GR. LF2, ACCORDING TO API 602, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AB1A33A-01 3 12 150 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AB1A33A-01 14 24 150 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 4 CHECK VALVE AB1A33A-01 1/2 2 800 SW KILLED CARBON STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS PISTON, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AB1A33A-01 3 24 150 RF KILLED CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01- 75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AB1A33A-01 1/2 2 800 SW KILLED CARBON STEEL, GLOBE VALVE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AB1A33A-01 3 12 150 RF KILLED CARBON STEEL, GLOBE VALVE, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BALL VALVE AB1A33A-01 1/2 2 800 SW KILLED CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-350 GR. LF2, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 9 BALL VALVE AB1A33A-01 3 12 150 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 10 BALL VALVE AB1A33A-01 14 24 150 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 11 PLUG VALVE AB1A33A-01 3 12 150 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR ECP-VST-G-GEN-FT-001 143/761 PIPING CLASS CLASS: AB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 12 PLUG VALVE AB1A33A-01 14 24 150 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 13 PIPE AB1A33A-01 1/2 2 PE 160 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, PLAIN ENDS 14 PIPE AB1A33A-01 3 8 BE 40 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 15 PIPE AB1A33A-01 10 24 BE 20 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 45 DEGREES AB1A33A-01 1/2 2 3000 SW KILLED CARBON STEEL, ELBOW 45 DEGREES, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11 17 ELBOW 45 DEGREES AB1A33A-01 3 8 BW 40 KILLED CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 45 DEGREES AB1A33A-01 10 24 BW 20 KILLED CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 90 DEGREES AB1A33A-01 1/2 2 3000 SW KILLED CARBON STEEL, ELBOW 90 DEGREES, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11 20 ELBOW 90 DEGREES AB1A33A-01 3 8 BW 40 KILLED CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 21 ELBOW 90 DEGREES AB1A33A-01 10 24 BW 20 KILLED CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 22 CONCENTRIC REDUCER AB1A33A 01 1/2 2 160 KILLED CARBON STEEL CONCENTRIC SWAGE ASTM A 420 GR WPL622 CONCENTRIC REDUCER AB1A33A-01 1/2 2 160 KILLED CARBON STEEL, CONCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 23 CONCENTRIC REDUCER AB1A33A-01 3 8 BW 40 KILLED CARBON STEEL, CONCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 24 CONCENTRIC REDUCER AB1A33A-01 10 24 BW 20 KILLED CARBON STEEL, CONCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 25 ECCENTRIC REDUCER AB1A33A-01 1/2 2 160 KILLED CARBON STEEL, ECCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR-01-75, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 26 ECCENTRIC REDUCER AB1A33A-01 3 8 BW 40 KILLED CARBON STEEL, ECCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 27 ECCENTRIC REDUCER AB1A33A-01 10 24 BW 20 KILLED CARBON STEEL, ECCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 28 CAP AB1A33A-01 1/2 2 3000 THD KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 29 CAP AB1A33A-01 1/2 2 3000 SW KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 30 CAP AB1A33A-01 3 8 BW 40 KILLED CARBON STEEL, CAP, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 31 CAP AB1A33A-01 10 24 BW 20 KILLED CARBON STEEL, CAP, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 32 STRAIGHT AND REDUCER TEE AB1A33A-01 1/2 2 3000 SW KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR- 01-75, SOCKET WELDING ENDS AS PER ASME B16.11 33 STRAIGHT AND REDUCER TEE AB1A33A-01 3 8 BW 40 KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR- 01-75, BEVELED ENDS AS PER ASME B16.25 34 STRAIGHT AND REDUCER TEE AB1A33A-01 10 24 BW 20 KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR- 01-75, BEVELED ENDS AS PER ASME B16.25 35 OLET AB1A33A-01 1/2 2 3000 SW KILLED CARBON STEEL, SOCKOLET, ASTM A-350 GR. LF2, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 144/761 PIPING CLASS CLASS: AB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 36 OLET AB1A33A-01 3 8 BW 40 KILLED CARBON STEEL, WELDOLET, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 37 OLET AB1A33A-01 10 24 BW 20 KILLED CARBON STEEL, WELDOLET, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 38 PLUG AB1A33A-01 1/2 2 3000 THD KILLED CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 39 COUPLING AB1A33A-01 1/2 2 3000 SW KILLED CARBON STEEL, COUPLING, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 40 NIPPLE AB1A33A-01 1/2 2 PE 160 KILLED CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01- 75, PLAIN ENDS 41 FLANGE AB1A33A-01 1/2 2 150 RF 160 KILLED CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 42 FLANGE AB1A33A-01 3 8 150 RF 40 KILLED CARBON STEEL, WELDING NECK FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 43 FLANGE AB1A33A-01 10 24 150 RF 20 KILLED CARBON STEEL, WELDING NECK FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 44 BLIND FLANGE AB1A33A-01 1/2 24 150 RF KILLED CARBON STEEL, BLIND FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 45 ORIFICE FLANGE AB1A33A-01 1 1/2 2 300 RF 160 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 46 ORIFICE FLANGE AB1A33A-01 3 8 300 RF 40 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR B7M NUTS ASTM A 194 GR 2HM AND PLUGS ASTM A 350 GR LF2193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 47 ORIFICE FLANGE AB1A33A-01 10 24 300 RF 20 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 48 BLIND PLATE AB1A33A-01 14 24 150 RF KILLED CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 49 SPACER RING AB1A33A-01 14 24 150 RF KILLED CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 50 FIGURE 8 AB1A33A-01 1/2 12 150 RF KILLED CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 51 DRIP RINGS AB1A33A-01 2 24 150 RF KILLED CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 52 GASKET AB1A33A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, SS316 INNER RING, THICKNESS 1/8" INCHES, AISI 316 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 53 BOLTING AB1A33A-01 KILLED CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7M / ASTM A 194 GR. 2HM, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 145/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AB1A33A-01 ECP-VST-G-GEN-FT-001 146/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL - KILLED To: 740 ASTM A-350 GR. LF2 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 BUTHANE BUT 150 707 CHEMICALS QUI 200 675 LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG 300 655 LIGHT NAPHTHA LGA 400 635 500 600 600 550 650 535 700 535 750 505 800 410 850 270 900 170 950 105 1000 50 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF2, NOT RECOMMENDED FOR PROLONGED USE ABOVE 800 °F, THE CARBIDE PHASE OF STEEL MAY BE CONVERTED TO GRAPHITE. 3.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" PIPING CLASS AB2A23A-01 FLANGE FINISH DATE: 5-oct-04 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 147/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AB2A23A-01 1/2 2 800 SW KILLED CARBON STEEL, GATE VALVE, ASTM A-350 GR. LF2, ACCORDING TO API 602, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598 TRIM 12 (AISI 316) WITH STELLITE AISI 316 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AB2A23A-01 3 12 300 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, ECP-VST-G-GEN-FT-001 148/761 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 3 GATE VALVE AB2A23A-01 14 24 300 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AB2A23A-01 1/2 2 800 SW KILLED CARBON STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICALSUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS PISTON, STELLITE INTEGRAL SEAT, . ECP-VST-G-GEN-FT-001 149/761 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 5 CHECK VALVE AB2A23A-01 3 24 300 RF KILLED CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AB2A23A-01 1/2 2 800 SW KILLED CARBON STEEL, GLOBE VALVE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16 11 CONSTRUCTION AS PER ASME B16 34ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE ECP-VST-G-GEN-FT-001 150/761 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 7 GLOBE VALVE AB2A23A-01 3 12 300 RF KILLED CARBON STEEL, GLOBE VALVE, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING 8 BALL VALVE AB2A23A-01 1/2 2 800 SW KILLED CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-350 GR. LF2, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR 01 75 SOCKET WELDING ENDS AS PERPER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, 9 BALL VALVE AB2A23A-01 3 12 300 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED 10 BALL VALVE AB2A23A-01 14 24 300 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 ECP-VST-G-GEN-FT-001 151/761 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 11 PLUG VALVE AB2A23A-01 3 12 300 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL 12 PLUG VALVE AB2A23A-01 14 24 300 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 TRIM 12 (AISI 316) WITH STELLITE BOLTEDAPI 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR 13 PIPE AB2A23A-01 1/2 2 PE 80 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, PLAIN ENDS 14 PIPE AB2A23A-01 3 24 BE 40 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS 15 ELBOW 45 DEGREES AB2A23A-01 1/2 2 6000 SW KILLED CARBON STEEL, ELBOW 45 DEGREES, ASTM A- 350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET 16 ELBOW 45 DEGREES AB2A23A-01 3 24 BW 40 KILLED CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, ECP-VST-G-GEN-FT-001 152/761 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 17 ELBOW 90 DEGREES AB2A23A-01 1/2 2 6000 SW KILLED CARBON STEEL, ELBOW 90 DEGREES, ASTM A- 350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET 18 ELBOW 90 DEGREES AB2A23A-01 3 24 BW 40 KILLED CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, 19 CONCENTRIC REDUCER AB2A23A-01 1/2 2 80 KILLED CARBON STEEL, CONCENTRIC SWAGE, ASTM A- 420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR 20 CONCENTRIC REDUCER AB2A23A-01 3 24 BW 40 KILLED CARBON STEEL, CONCENTRIC REDUCER, ASTM A- 420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS 21 ECCENTRIC REDUCER AB2A23A 01 1/2 2 80 KILLED CARBON STEEL ECCENTRIC SWAGE ASTM A 42021 ECCENTRIC REDUCER AB2A23A-01 1/2 2 80 KILLED CARBON STEEL, ECCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR-01-75, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END 22 ECCENTRIC REDUCER AB2A23A-01 3 24 BW 40 KILLED CARBON STEEL, ECCENTRIC REDUCER, ASTM A- 420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS 23 CAP AB2A23A-01 1/2 2 6000 THD KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, FEMALE THREADED ENDS AS PER 24 CAP AB2A23A-01 1/2 2 6000 SW KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ECP-VST-G-GEN-FT-001 153/761 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 25 CAP AB2A23A-01 3 24 BW 40 KILLED CARBON STEEL, CAP, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME 26 STRAIGHT AND REDUCER TEE AB2A23A-01 1/2 2 6000 SW KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET 27 STRAIGHT AND REDUCER TEE AB2A23A-01 3 24 BW 40 KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS 28 OLET AB2A23A-01 1/2 2 6000 SW KILLED CARBON STEEL, SOCKOLET, ASTM A-350 GR. LF2, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER 29 OLET AB2A23A 01 3 24 BW 40 KILLED CARBON STEEL WELDOLET ASTM A 420 GR29 OLET AB2A23A-01 3 24 BW 40 KILLED CARBON STEEL, WELDOLET, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME 30 PLUG AB2A23A-01 1/2 2 6000 THD KILLED CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, MALE 31 COUPLING AB2A23A-01 1/2 2 6000 SW KILLED CARBON STEEL, COUPLING, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ECP-VST-G-GEN-FT-001 154/761 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 32 NIPPLE AB2A23A-01 1/2 2 PE 80 KILLED CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, PLAIN ENDS 33 FLANGE AB2A23A-01 1/2 2 300 RF 80 KILLED CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, 34 FLANGE AB2A23A-01 3 24 300 RF 40 KILLED CARBON STEEL, WELDING NECK FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED 35 BLIND FLANGE AB2A23A-01 1/2 24 300 RF KILLED CARBON STEEL, BLIND FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE 36 ORIFICE FLANGE AB2A23A-01 1 1/2 2 300 RF 80 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16 36 GENERAL REQUIREMENTS AS PER ASMEASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM 37 ORIFICE FLANGE AB2A23A-01 3 24 300 RF 40 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM ECP-VST-G-GEN-FT-001 155/761 PIPING CLASS CLASS: AB2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 38 BLIND PLATE AB2A23A-01 14 24 300 RF KILLED CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 39 SPACER RING AB2A23A-01 14 24 300 RF KILLED CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 40 FIGURE 8 AB2A23A-01 1/2 12 300 RF KILLED CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 41 DRIP RINGS AB2A23A-01 2 24 300 RF KILLED CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, 42 GASKET AB2A23A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, SS316 INNER RING, THICKNESS 1/8" INCHES AISI 316 SS DIMENSIONS AS PER ASME B16 20INCHES, AISI 316 SS, DIMENSIONS AS PER ASME B16.20, 43 BOLTING AB2A23A-01 KILLED CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7M / ASTM A 194 GR. 2HM, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME NOTES: ECP-VST-G-GEN-FT-001 156/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AB2A23A-01 ECP-VST-G-GEN-FT-001 157/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL - KILLED To: 740 ASTM A-350 GR. LF2 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 ETHYLENE ETI 150 707 POLYETHYLENE POL 200 675 ETHANE ETA 300 655 METHANOL MEL 400 635 PROPYLENE PPN 500 600 600 550 650 535 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AB2A33A-01 FLANGE FINISH DATE: 5-oct-04 RF PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING 650 535 700 535 750 505 800 410 850 270 900 170 950 105 1000 50 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF2, NOT RECOMMENDED FOR PROLONGED USE ABOVE 800 °F, THE CARBIDE PHASE OF STEEL MAY BE CONVERTED TO GRAPHITE. 3.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 158/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AB2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AB2A33A-01 1/2 2 800 SW KILLED CARBON STEEL, GATE VALVE, ASTM A-350 GR. LF2, ACCORDING TO API 602, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AB2A33A-01 3 12 300 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AB2A33A-01 14 24 300 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AB2A33A-01 1/2 2 800 SW KILLED CARBON STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS PISTON, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AB2A33A-01 3 24 300 RF KILLED CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AB2A33A-01 1/2 2 800 SW KILLED CARBON STEEL, GLOBE VALVE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AB2A33A-01 3 12 300 RF KILLED CARBON STEEL, GLOBE VALVE, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BALL VALVE AB2A33A-01 1/2 2 800 SW KILLED CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-350 GR. LF2, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 9 BALL VALVE AB2A33A-01 3 12 300 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 10 BALL VALVE AB2A33A-01 14 24 300 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 11 PLUG VALVE AB2A33A-01 3 12 300 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 12 PLUG VALVE AB2A33A-01 14 24 300 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 13 PIPE AB2A33A-01 1/2 2 PE 160 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, PLAIN ENDS 14 PIPE AB2A33A-01 3 24 BE 40 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES AB2A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, ELBOW 45 DEGREES, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 45 DEGREES AB2A33A-01 3 24 BW 40 KILLED CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 159/761 PIPING CLASS CLASS: AB2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 17 ELBOW 90 DEGREES AB2A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, ELBOW 90 DEGREES, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, SOCKET WELDING ENDS AS PER ASME B16.11 18 ELBOW 90 DEGREES AB2A33A-01 3 24 BW 40 KILLED CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 19 CONCENTRIC REDUCER AB2A33A-01 1/2 2 160 KILLED CARBON STEEL, CONCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 20 CONCENTRIC REDUCER AB2A33A-01 3 24 BW 40 KILLED CARBON STEEL, CONCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER AB2A33A-01 1/2 2 160 KILLED CARBON STEEL, ECCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR-01-75, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER AB2A33A-01 3 24 BW 40 KILLED CARBON STEEL, ECCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 23 CAP AB2A33A-01 1/2 2 6000 THD KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 24 CAP AB2A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 25 CAP AB2A33A-01 3 24 BW 40 KILLED CARBON STEEL, CAP, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 26 STRAIGHT AND REDUCER TEE AB2A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR- 01-75, SOCKET WELDING ENDS AS PER ASME B16.11 27 STRAIGHT AND REDUCER TEE AB2A33A-01 3 24 BW 40 KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR- 01-75, BEVELED ENDS AS PER ASME B16.25 28 OLET AB2A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, SOCKOLET, ASTM A-350 GR. LF2, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 29 OLET AB2A33A-01 3 24 BW 40 KILLED CARBON STEEL, WELDOLET, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 30 PLUG AB2A33A-01 1/2 2 6000 THD KILLED CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01- 75, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 31 COUPLING AB2A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, COUPLING, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 32 NIPPLE AB2A33A-01 1/2 2 PE 160 KILLED CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01- 75, PLAIN ENDS 33 FLANGE AB2A33A-01 1/2 2 300 RF 160 KILLED CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 34 FLANGE AB2A33A-01 3 24 300 RF 40 KILLED CARBON STEEL, WELDING NECK FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 35 BLIND FLANGE AB2A33A-01 1/2 24 300 RF KILLED CARBON STEEL, BLIND FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 36 ORIFICE FLANGE AB2A33A-01 1 1/2 2 300 RF 160 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 37 ORIFICE FLANGE AB2A33A-01 3 24 300 RF 40 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 38 BLIND PLATE AB2A33A-01 14 24 300 RF KILLED CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 39 SPACER RING AB2A33A-01 14 24 300 RF KILLED CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 40 FIGURE 8 AB2A33A-01 1/2 12 300 RF KILLED CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 41 DRIP RINGS AB2A33A-01 2 24 300 RF KILLED CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 42 GASKET AB2A33A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, SS316 INNER RING, THICKNESS 1/8" INCHES, AISI 316 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 43 BOLTING AB2A33A-01 KILLED CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7M / ASTM A 194 GR. 2HM, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 160/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AB2A33A-01 ECP-VST-G-GEN-FT-001 161/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL - KILLED To: 1480 ASTM A-350 GR. LF2 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1480 ETHYLENE ETI 150 1415 POLYETHYLENE POL 200 1350 300 1315 400 1270 500 1200 600 1095 650 1075 700 1065 750 1010 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" PIPING CLASS AB3A33A-01 FLANGE FINISH DATE: 5-oct-04 RF 800 825 850 535 900 345 950 205 1000 105 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF2, NOT RECOMMENDED FOR PROLONGED USE ABOVE 800 °F, THE CARBIDE PHASE OF STEEL MAY BE CONVERTED TO GRAPHITE. 3.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 162/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: AB3A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AB3A33A-01 1/2 2 800 SW KILLED CARBON STEEL, GATE VALVE, ASTM A-350 GR. LF2, ACCORDING TO API 602, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AB3A33A-01 3 12 600 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE AB3A33A-01 14 24 600 RF KILLED CARBON STEEL, GATE VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE AB3A33A-01 1/2 2 800 SW KILLED CARBON STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS PISTON, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE AB3A33A-01 3 24 600 RF KILLED CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE AB3A33A-01 1/2 2 800 SW KILLED CARBON STEEL, GLOBE VALVE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE AB3A33A-01 3 12 600 RF KILLED CARBON STEEL, GLOBE VALVE, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, AISI 316 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 163/761 PIPING CLASS CLASS: AB3A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 8 BALL VALVE AB3A33A-01 1/2 2 800 SW KILLED CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-350 GR. LF2, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 9 BALL VALVE AB3A33A-01 3 12 600 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 10 BALL VALVE AB3A33A-01 14 24 600 RF KILLED CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, ASTM A-352 GR. LCB, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR- 01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 11 PLUG VALVE AB3A33A-01 3 12 600 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 12 PLUG VALVE AB3A33A-01 14 24 600 RF KILLED CARBON STEEL, PLUG VALVE, ASTM A-352 GR. LCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, REQUIREMENTS AS PER NACE MR-01-75, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM 12 (AISI 316) WITH STELLITE, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 13 PIPE AB3A33A-01 1/2 2 PE 160 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, PLAIN ENDS 14 PIPE AB3A33A-01 3 24 BE 80 KILLED CARBON STEEL, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES AB3A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, ELBOW 45 DEGREES, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 45 DEGREES AB3A33A-01 3 24 BW 80 KILLED CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES AB3A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, ELBOW 90 DEGREES, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 18 ELBOW 90 DEGREES AB3A33A-01 3 24 BW 80 KILLED CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 19 CONCENTRIC REDUCER AB3A33A-01 1/2 2 160 KILLED CARBON STEEL, CONCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 20 CONCENTRIC REDUCER AB3A33A-01 3 24 BW 80 KILLED CARBON STEEL, CONCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER AB3A33A-01 1/2 2 160 KILLED CARBON STEEL, ECCENTRIC SWAGE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-95, REQUIREMENTS AS PER NACE MR-01-75, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER AB3A33A-01 3 24 BW 80 KILLED CARBON STEEL, ECCENTRIC REDUCER, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 23 CAP AB3A33A-01 1/2 2 6000 THD KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 24 CAP AB3A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, CAP, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 25 CAP AB3A33A-01 3 24 BW 80 KILLED CARBON STEEL, CAP, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 26 STRAIGHT AND REDUCER TEE AB3A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 27 STRAIGHT AND REDUCER TEE AB3A33A-01 3 24 BW 80 KILLED CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-420 GR. WPL6, DIMENSIONS AS PER ASME B16.9, REQUIREMENTS AS PER NACE MR- 01-75, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 164/761 PIPING CLASS CLASS: AB3A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 28 OLET AB3A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, SOCKOLET, ASTM A-350 GR. LF2, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 29 OLET AB3A33A-01 3 24 BW 80 KILLED CARBON STEEL, WELDOLET, ASTM A-420 GR. WPL6, DIMENSIONS AS PER MSS-SP-97, REQUIREMENTS AS PER NACE MR-01-75, BEVELED ENDS AS PER ASME B16.25 30 PLUG AB3A33A-01 1/2 2 6000 THD KILLED CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 31 COUPLING AB3A33A-01 1/2 2 6000 SW KILLED CARBON STEEL, COUPLING, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.11, REQUIREMENTS AS PER NACE MR-01-75, SOCKET WELDING ENDS AS PER ASME B16.11 32 NIPPLE AB3A33A-01 1/2 2 PE 160 KILLED CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-333 GR.6, DIMENSIONS AS PER ASME B36.10, REQUIREMENTS AS PER NACE MR-01-75, PLAIN ENDS 33 FLANGE AB3A33A-01 1/2 2 600 RF 160 KILLED CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 34 FLANGE AB3A33A-01 3 24 600 RF 80 KILLED CARBON STEEL, WELDING NECK FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 35 BLIND FLANGE AB3A33A-01 1/2 24 600 RF KILLED CARBON STEEL, BLIND FLANGE, ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 36 ORIFICE FLANGE AB3A33A-01 1 1/2 2 600 RF 160 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 37 ORIFICE FLANGE AB3A33A-01 3 24 600 RF 80 KILLED CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-350 GR. LF2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7M, NUTS ASTM A-194 GR. 2HM AND PLUGS ASTM A-350 GR. LF2. 38 BLIND PLATE AB3A33A-01 14 24 600 RF KILLED CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 39 SPACER RING AB3A33A-01 14 24 600 RF KILLED CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 40 FIGURE 8 AB3A33A-01 1/2 12 600 RF KILLED CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 41 DRIP RINGS AB3A33A-01 2 24 600 RF KILLED CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 42 GASKET AB3A33A-01 1/2 24 600 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, SS316 INNER RING, THICKNESS 1/8" INCHES, AISI 316 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 43 BOLTING AB3A33A-01 KILLED CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7M / ASTM A 194 GR. 2HM, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 165/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AB3A33A-01 ECP-VST-G-GEN-FT-001 166/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 290 A-182 GR. F12 CL. 2 / A-182 GR. F11 CL. 2 DESIGN TEMPERATURE (°F): From: -20 To: 850 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 290 HYDROGEN HYD 150 272 HIGH PRESSURE STEAM HPS 200 260 300 230 400 200 500 170 600 140 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES PIPING MATERIAL SPECIFICATION RF PIPING CLASS BA1A23A-01 ANSI RATING 650 125 700 110 750 95 800 80 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.9 2.- A-182 GR. F12 Cl. 2 / A-182 GR. F11 Cl. 2, BOTH, SHALL BE NORMALIZED AND TEMPERED 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 720 1455 2165 3610 400 200 695 1385 2080 3465 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 320 640 955 1595 1000 20 215 430 650 1080 1050 ,,, 145 290 430 720 1100 ,,, 95 190 290 480 1150 ,,, 60 125 185 310 1200 ,,, 40 75 115 190 ECP-VST-G-GEN-FT-001 167/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BA1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BA1A23A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F11 CL. 2, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BA1A23A-01 3 8 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BA1A23A-01 10 24 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BA1A23A-01 1/2 2 800 SW ALLOY STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE BA1A23A-01 3 24 150 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS CÓDIGO CNE ECP-VST-P-MET-ET-006 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE BA1A23A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BA1A23A-01 3 8 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BA1A23A-01 10 12 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BA1A23A-01 1/2 2 PE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo),DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BA1A23A-01 3 6 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 PIPE BA1A23A-01 8 24 BE 20 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES BA1A23A-01 1/2 2 3000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES BA1A23A-01 3 6 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 168/761 PIPING CLASS CLASS: BA1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 14 ELBOW 45 DEGREES BA1A23A-01 8 24 BW 20 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 90 DEGREES BA1A23A-01 1/2 2 3000 SW ALLOY STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 90 DEGREES BA1A23A-01 3 6 BW 40 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES BA1A23A-01 8 24 BW 20 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 CONCENTRIC REDUCER BA1A23A-01 1/2 2 80 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 19 CONCENTRIC REDUCER BA1A23A-01 3 6 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER BA1A23A-01 8 24 BW 20 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER BA1A23A-01 1/2 2 80 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER BA1A23A-01 3 6 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER BA1A23A-01 8 24 BW 20 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 CAP BA1A23A-01 1/2 2 3000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 25 CAP BA1A23A-01 1/2 2 3000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 26 CAP BA1A23A-01 3 6 BW 40 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25 27 CAP BA1A23A-01 8 24 BW 20 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25 28 STRAIGHT AND REDUCER TEE BA1A23A-01 1/2 2 3000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 STRAIGHT AND REDUCER 3 6 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, TEE BA1A23A-01 DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE BA1A23A-01 8 24 BW 20 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 OLET BA1A23A-01 1/2 2 3000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERMSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 32 OLET BA1A23A-01 3 6 BW 40 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 33 OLET BA1A23A-01 8 24 BW 20 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 34 PLUG BA1A23A-01 1/2 2 3000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 COUPLING BA1A23A-01 1/2 2 3000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 36 NIPPLE BA1A23A-01 1/2 2 PE 80 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr -1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 37 FLANGE BA1A23A-01 1/2 2 150 RF 80 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 38 FLANGE BA1A23A-01 3 6 150 RF 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 39 FLANGE BA1A23A-01 8 24 150 RF 20 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 40 BLIND FLANGE BA1A23A-01 1/2 24 150 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END 41 ORIFICE FLANGE BA1A23A-01 1 2 300 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 ECP-VST-G-GEN-FT-001 169/761 PIPING CLASS CLASS: BA1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 42 ORIFICE FLANGE BA1A23A-01 3 6 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 43 ORIFICE FLANGE BA1A23A-01 8 24 300 RF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 44 FIGURE 8 BA1A23A-01 1/2 12 150 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 45 SPACER RING BA1A23A-01 14 24 150 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 46 BLIND PLATE BA1A23A-01 14 24 150 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 47 DRIP RINGS BA1A23A-01 2 24 150 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 48 GASKET BA1A23A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 49 BOLTING BA1A23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 170/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BA1A23A-01 ECP-VST-G-GEN-FT-001 171/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 290 A-182 GR. F12 CL. 2 / A-182 GR. F11 CL. 2 DESIGN TEMPERATURE (°F): From: -20 To: 850 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 290 CHEMICALS QUI 150 272 LIGHT NAPHTHA + HYDROGEN NAH 200 260 HIGH PRESSURE STEAM HPS 300 230 400 200 500 170 600 140 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS BA1A33A-02 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: 5-oct-04 650 125 700 110 750 95 800 80 850 65 900 50 950 35 1000 20 1050 ,,, 1100 ,,, 1150 ,,, 1200 ,,, NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.9 2.- A-182 GR. F12 Cl. 2 / A-182 GR. F11 Cl. 2, BOTH, SHALL BE NORMALIZED AND TEMPERED 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 720 1455 2165 3610 400 200 695 1385 2080 3465 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 320 640 955 1595 1000 20 215 430 650 1080 1050 ,,, 145 290 430 720 1100 ,,, 95 190 290 480 1150 ,,, 60 125 185 310 1200 ,,, 40 75 115 190 ECP-VST-G-GEN-FT-001 172/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS:BA1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BA1A33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F11 CL. 2, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BA1A33A-01 3 8 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BA1A33A-01 10 24 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BA1A33A-01 1/2 2 800 SW ALLOY STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE BA1A33A-01 3 24 150 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 , 6 GLOBE VALVE BA1A33A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BA1A33A-01 3 8 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BA1A33A-01 10 12 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BA1A33A-01 1/2 3/4 PE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo),DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BA1A33A-01 1 2 PE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo),DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 11 PIPE BA1A33A-01 3 8 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 12 PIPE BA1A33A-01 10 24 BE 20 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 45 DEGREES BA1A33A-01 1/2 2 3000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 45 DEGREES BA1A33A-01 3 8 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 173/761 PIPING CLASS CLASS:BA1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 15 ELBOW 45 DEGREES BA1A33A-01 10 24 BW 20 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 90 DEGREES BA1A33A-01 1/2 2 3000 SW ALLOY STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 17 ELBOW 90 DEGREES BA1A33A-01 3 8 BW 40 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 90 DEGREES BA1A33A-01 10 24 BW 20 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CONCENTRIC REDUCER BA1A33A-01 1/2 3/4 160 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 20 CONCENTRIC REDUCER BA1A33A-01 1 2 80 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 21 CONCENTRIC REDUCER BA1A33A-01 3 8 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 CONCENTRIC REDUCER BA1A33A-01 10 24 BW 20 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER BA1A33A-01 1/2 3/4 160 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 24 ECCENTRIC REDUCER BA1A33A-01 1 2 80 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 25 ECCENTRIC REDUCER BA1A33A-01 3 8 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 26 ECCENTRIC REDUCER BA1A33A-01 10 24 BW 20 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 CAP BA1A33A-01 1/2 2 3000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 CAP BA1A33A-01 1/2 2 3000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 CAP BA1A33A-01 3 8 BW 40 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25 30 CAP BA1A33A 01 10 24 BW 20 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASMEBA1A33A-01 , , ,B16.9, BEVELED ENDS AS PER ASME B16.25 31 STRAIGHT AND REDUCER TEE BA1A33A-01 1/2 2 3000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 32 STRAIGHT AND REDUCER TEE BA1A33A-01 3 8 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 33 STRAIGHT AND REDUCER TEE BA1A33A-01 10 24 BW 20 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 34 OLET BA1A33A-01 1/2 2 3000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 35 OLET BA1A33A-01 3 8 BW 40 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 36 OLET BA1A33A-01 10 24 BW 20 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 37 PLUG BA1A33A-01 1/2 2 3000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 38 COUPLING BA1A33A-01 1/2 2 3000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 39 NIPPLE BA1A33A-01 1/2 3/4 PE 160 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr -1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 40 NIPPLE BA1A33A-01 1 2 PE 80 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr -1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 41 FLANGE BA1A33A-01 1/2 3/4 RF 160 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 42 FLANGE BA1A33A-01 1 2 RF 80 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 43 FLANGE BA1A33A-01 3 8 150 RF 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 44 FLANGE BA1A33A-01 10 24 150 RF 20 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 45 BLIND FLANGE BA1A33A-01 1/2 24 150 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 174/761 PIPING CLASS CLASS:BA1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 46 ORIFICE FLANGE BA1A33A-01 1/2 3/4 300 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 47 ORIFICE FLANGE BA1A33A-01 1 2 300 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 48 ORIFICE FLANGE BA1A33A-01 3 8 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 49 ORIFICE FLANGE BA1A33A-01 10 24 300 RF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 50 FIGURE 8 BA1A33A-01 1/2 12 150 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 51 SPACER RING BA1A33A-01 14 24 150 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 52 BLIND PLATE BA1A33A-01 14 24 150 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 53 DRIP RINGS BA1A33A-01 2 24 150 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 54 GASKET BA1A33A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 55 BOLTING BA1A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 175/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BA1A33A-01 ECP-VST-G-GEN-FT-001 176/761 Elaborado 10/12/2010 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 750 A-182 GR. F12 CL. 2 / A-182 GR. F11 CL. 2 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 750 HYDROGEN HYD 150 750 HIGH PRESSURE STEAM HPS 200 750 300 720 400 695 500 665 600 605 650 590 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS BA2A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 700 570 750 530 800 510 850 485 900 450 950 320 1000 215 1050 145 1100 95 1150 60 1200 40 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.9 2.- A-182 GR. F12 Cl. 2 / A-182 GR. F11 Cl. 2, BOTH, SHALL BE NORMALIZED AND TEMPERED 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 720 1455 2165 3610 400 200 695 1385 2080 3465 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 320 640 955 1595 1000 20 215 430 650 1080 1050 ,,, 145 290 430 720 1100 ,,, 95 190 290 480 1150 ,,, 60 125 185 310 1200 ,,, 40 75 115 190 ECP-VST-G-GEN-FT-001 177/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BA2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BA2A23A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F11 CL. 2, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BA2A23A-01 3 8 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BA2A23A-01 10 24 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BA2A23A-01 1/2 2 800 SW ALLOY STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE BA2A23A-01 3 24 300 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE BA2A23A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BA2A23A-01 3 8 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BA2A23A-01 10 12 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BA2A23A-01 1/2 2 PE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo),DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BA2A23A-01 3 24 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES BA2A23A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES BA2A23A-01 3 24 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES BA2A23A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES BA2A23A-01 3 24 BW 40 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER BA2A23A-01 1/2 2 80 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 178/761 PIPING CLASS CLASS: BA2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 16 CONCENTRIC REDUCER BA2A23A-01 3 24 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER BA2A23A-01 1/2 2 80 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER BA2A23A-01 3 24 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CAP BA2A23A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 20 CAP BA2A23A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 CAP BA2A23A-01 3 24 BW 40 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER TEE BA2A23A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER TEE BA2A23A-01 3 24 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BA2A23A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERMSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET BA2A23A-01 3 24 BW 40 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG BA2A23A-01 1/2 2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING BA2A23A-01 1/2 2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BA2A23A-01 1/2 2 PE 80 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr -1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE BA2A23A-01 1/2 2 300 RF 80 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 30 FLANGE BA2A23A-01 3 24 300 RF 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 31 BLIND FLANGE BA2A23A-01 1/2 24 300 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END 32 ORIFICE FLANGE BA2A23A-01 1 2 300 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7 NUTS ASTM A 194 GR 2H AND PLUGS ASTM A 182 GR F11 CL 2B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 33 ORIFICE FLANGE BA2A23A-01 3 24 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 34 FIGURE 8 BA2A23A-01 1/2 12 300 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 35 SPACER RING BA2A23A-01 14 24 300 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PERASME B16.5, RAISED FACE ENDS 36 BLIND PLATE BA2A23A-01 14 24 300 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PERASME B16.5, RAISED FACE ENDS 37 DRIP RINGS BA2A23A-01 2 24 300 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 38 GASKET BA2A23A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 39 BOLTING BA2A23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 179/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BA2A23A-01 ECP-VST-G-GEN-FT-001 180/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 750 A-182 GR. F12 CL. 2 / A-182 GR. F11 CL. 2 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 750 CHEMICALS QUI 150 750 LIGHT NAPHTHA + HYDROGEN NAH 200 750 HIGH PRESSURE STEAM HPS 300 720 400 695 500 665 600 605 650 590 700 570 5-oct-04 RF PIPING CLASS BA2A33A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 750 530 800 510 850 485 900 450 950 320 1000 215 1050 145 1100 95 1150 60 1200 40 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.9 2.- A-182 GR. F12 Cl. 2 / A-182 GR. F11 Cl. 2, BOTH, SHALL BE NORMALIZED AND TEMPERED 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 720 1455 2165 3610 400 200 695 1385 2080 3465 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 320 640 955 1595 1000 20 215 430 650 1080 1050 ,,, 145 290 430 720 1100 ,,, 95 190 290 480 1150 ,,, 60 125 185 310 1200 ,,, 40 75 115 190 ECP-VST-G-GEN-FT-001 181/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BA2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BA2A33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F11 CL. 2, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BA2A33A-01 3 8 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER 3 GATE VALVE BA2A33A-01 10 24 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER 4 CHECK VALVE BA2A33A-01 1/2 2 800 SW ALLOY STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE 3 24 300 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 BA2A33A-01 FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE BA2A33A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BA2A33A-01 3 8 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BA2A33A-01 10 12 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR 9 PIPE BA2A33A-01 1/2 2 PE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BA2A33A-01 3 24 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES BA2A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES BA2A33A-01 3 24 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A- 234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES BA2A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES BA2A33A-01 3 24 BW 40 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A- 234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 182/761 PIPING CLASS CLASS: BA2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 15 CONCENTRIC REDUCER BA2A33A-01 1/2 2 160 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER BA2A33A-01 3 24 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER BA2A33A-01 1/2 2 160 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER BA2A33A-01 3 24 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CAP BA2A33A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 20 CAP BA2A33A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 CAP BA2A33A-01 3 24 BW 40 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER TEE BA2A33A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER TEE BA2A33A-01 3 24 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BA2A33A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET BA2A33A-01 3 24 BW 40 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG BA2A33A-01 1/2 2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING BA2A33A-01 1/2 2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BA2A33A-01 1/2 2 PE 160 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE BA2A33A-01 1/2 2 300 RF 160 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED ENDFLANGED END 30 FLANGE BA2A33A-01 3 24 300 RF 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 31 BLIND FLANGE BA2A33A-01 1/2 24 300 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 32 ORIFICE FLANGE BA2A33A-01 1 2 300 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 33 ORIFICE FLANGE BA2A33A-01 3 24 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 34 FIGURE 8 BA2A33A-01 1/2 12 300 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 35 SPACER RING BA2A33A-01 14 24 300 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 36 BLIND PLATE BA2A33A-01 14 24 300 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 37 DRIP RINGS BA2A33A-01 2 24 300 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 38 GASKET BA2A33A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 39 BOLTING BA2A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 40 NOTES: ECP-VST-G-GEN-FT-001 183/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BA2A33A-01 ECP-VST-G-GEN-FT-001 184/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 750 A-182 GR. F12 CL. 2 / A-182 GR. F11 CL. 2 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 750 HYDROTREATED NAPHTHA + HYDROGEN NHH 150 750 LIGHT NAPHTHA + HYDROGEN NAH 200 750 300 720 400 695 500 665 600 605 650 590 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RTJ PIPING CLASS BA2B33A-01 ANSI RATING 700 570 750 530 800 510 850 485 900 450 950 320 1000 215 1050 145 1100 95 1150 60 1200 40 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.9 2.- A-182 GR. F12 Cl. 2 / A-182 GR. F11 Cl. 2, BOTH, SHALL BE NORMALIZED AND TEMPERED 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 720 1455 2165 3610 400 200 695 1385 2080 3465 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 320 640 955 1595 1000 20 215 430 650 1080 1050 ,,, 145 290 430 720 1100 ,,, 95 190 290 480 1150 ,,, 60 125 185 310 1200 ,,, 40 75 115 190 ECP-VST-G-GEN-FT-001 185/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BA2B33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BA2B33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F11 CL. 2, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BA2B33A-01 3 8 300 RTJ ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BA2B33A-01 10 24 300 RTJ ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BA2B33A-01 1/2 2 800 SW ALLOY STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE BA2B33A-01 3 24 300 RTJ ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE BA2B33A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER BOLTED BONNET PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 BA2B33A 01 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BA2B33A-01 3 8 300 RTJ ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BA2B33A-01 10 12 300 RTJ ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BA2B33A-01 1/2 3/4 PE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo),DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BA2B33A-01 1 2 PE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo),DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 11 PIPE BA2B33A-01 3 24 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES BA2B33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES BA2B33A-01 3 24 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 90 DEGREES BA2B33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 15 ELBOW 90 DEGREES BA2B33A-01 3 24 BW 40 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 CONCENTRIC REDUCER BA2B33A-01 1/2 3/4 160 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 17 CONCENTRIC REDUCER BA2B33A-01 1 2 80 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 186/761 PIPING CLASS CLASS: BA2B33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 18 CONCENTRIC REDUCER BA2B33A-01 3 24 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 ECCENTRIC REDUCER BA2B33A-01 1/2 3/4 160 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 20 ECCENTRIC REDUCER BA2B33A-01 1 2 80 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 21 ECCENTRIC REDUCER BA2B33A-01 3 24 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 CAP BA2B33A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 23 CAP BA2B33A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 24 CAP BA2B33A-01 3 24 BW 40 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25 25 STRAIGHT AND REDUCER TEE BA2B33A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 26 STRAIGHT AND REDUCER TEE BA2B33A-01 3 24 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 OLET BA2B33A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERMSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 28 OLET BA2B33A-01 3 24 BW 40 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 29 PLUG BA2B33A-01 1/2 2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 30 COUPLING BA2B33A-01 1/2 2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 31 NIPPLE BA2B33A-01 1/2 3/4 PE 160 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr -1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 32 NIPPLE BA2B33A-01 1 2 PE 80 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr -1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 33 FLANGE BA2B33A-01 1/2 3/4 300 RTJ 160 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 34 FLANGE BA2B33A-01 1 2 300 RTJ 80 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 35 FLANGE BA2B33A-01 3 24 300 RTJ 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RING JOINT FLANGED END 36 BLIND FLANGE BA2B33A-01 1/2 24 300 RTJ ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS ASPER ASME B16.5, RING JOINT FLANGED END 37 ORIFICE FLANGE 1 2 300 RTJ 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE) ASTM A 182 GR F11 CL 2 BA2B33A-01 WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2, RING JOINT FLANGED END 38 ORIFICE FLANGE BA2B33A-01 3 24 300 RTJ 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2, RING JOINT FLANGED END 39 FIGURE 8 BA2B33A-01 1/2 12 300 RTJ ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RING JOINT ENDS 40 SPACER RING BA2B33A-01 14 24 300 RTJ ALLOY STEEL, SPACER RING, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PERASME B16.5, RING JOINT ENDS 41 BLIND PLATE BA2B33A-01 14 24 300 RTJ ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PERASME B16.5, RING JOINT ENDS 42 DRIP RINGS BA2B33A-01 2 24 300 RTJ ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 43 GASKET BA2B33A-01 1/2 24 300 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 44 BOLTING BA2B33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 187/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BA2B33A-01 ECP-VST-G-GEN-FT-001 188/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 1500 A-182 GR. F12 CL. 2 / A-182 GR. F11 CL. 2 DESIGN TEMPERATURE (°F): From: -20 To: 750 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1500 HYDROTREATED NAPHTHA NHT 150 1500 200 1500 300 1455 400 1385 500 1330 600 1210 650 1175 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS BA3123A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 700 1135 750 1065 800 1015 850 975 900 900 950 640 1000 430 1050 290 1100 190 1150 125 1200 75 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.9 2.- A-182 GR. F12 Cl. 2 / A-182 GR. F11 Cl. 2, BOTH, SHALL BE NORMALIZED AND TEMPERED 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 720 1455 2165 3610 400 200 695 1385 2080 3465 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 320 640 955 1595 1000 20 215 430 650 1080 1050 ,,, 145 290 430 720 1100 ,,, 95 190 290 480 1150 ,,, 60 125 185 310 1200 ,,, 40 75 115 190 ECP-VST-G-GEN-FT-001 189/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BA3123A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BA3123A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F11 CL. 2, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BA3123A-01 3 8 600 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BA3123A-01 10 24 600 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BA3123A-01 1/2 2 800 SW ALLOY STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE BA3123A-01 3 24 600 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16 10 SOCKET WELDING ENDS AS PER ASME B16 11 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 BA3123A-01 PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BA3123A-01 3 8 600 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BA3123A-01 10 12 600 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BA3123A-01 1/2 2 PE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo),DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BA3123A-01 3 24 BE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES BA3123A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES BA3123A-01 3 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 190/761 PIPING CLASS CLASS: BA3123A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 13 ELBOW 90 DEGREES BA3123A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES BA3123A-01 3 24 BW 80 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER BA3123A-01 1/2 2 80 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER BA3123A-01 3 24 BW 80 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER BA3123A-01 1/2 2 80 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER BA3123A-01 3 24 BW 80 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CAP BA3123A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 20 CAP BA3123A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 CAP BA3123A-01 3 24 BW 80 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER TEE BA3123A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER TEE BA3123A-01 3 24 BW 80 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BA3123A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERMSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET BA3123A-01 3 24 BW 80 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG BA3123A-01 1/2 2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING BA3123A-01 1/2 2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BA3123A-01 1/2 2 PE 80 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr -1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE BA3123A-01 1/2 2 600 RF 80 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 30 FLANGE BA3123A-01 3 24 600 RF 80 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16 5 RAISED FACE FLANGED ENDBA3123A 01 DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 31 BLIND FLANGE BA3123A-01 1/2 24 600 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END 32 ORIFICE FLANGE BA3123A-01 1 2 600 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 33 ORIFICE FLANGE BA3123A-01 3 24 600 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2 34 FIGURE 8 BA3123A-01 1/2 12 600 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 35 SPACER RING BA3123A-01 14 24 600 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 36 BLIND PLATE BA3123A-01 14 24 600 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 37 DRIP RINGS BA3123A-01 2 24 600 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 38 GASKET BA3123A-01 1/2 24 600 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 39 BOLTING BA3123A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 40 NOTES: ECP-VST-G-GEN-FT-001 191/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BA3123A-01 ECP-VST-G-GEN-FT-001 192/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 1500 A-182 GR. F12 CL. 2 / A-182 GR. F11 CL. 2 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1500 HYDROTREATED NAPHTHA + HYDROGEN NHH 150 1500 200 1500 300 1455 400 1385 500 1330 600 1210 650 1175 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RTJ PIPING CLASS BA3B33A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: 5-oct-04 700 1135 750 1065 800 1015 850 975 900 900 950 640 1000 430 1050 290 1100 190 1150 125 1200 75 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.9 2.- A-182 GR. F12 Cl. 2 / A-182 GR. F11 Cl. 2, BOTH, SHALL BE NORMALIZED AND TEMPERED 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 720 1455 2165 3610 400 200 695 1385 2080 3465 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 320 640 955 1595 1000 20 215 430 650 1080 1050 ,,, 145 290 430 720 1100 ,,, 95 190 290 480 1150 ,,, 60 125 185 310 1200 ,,, 40 75 115 190 ECP-VST-G-GEN-FT-001 193/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BA3B33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATIN G FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BA3B33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F11 CL. 2, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BA3B33A-01 3 8 600 RTJ ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BA3B33A-01 10 24 600 RTJ ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC6, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BA3B33A-01 1/2 2 800 SW ALLOY STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE BA3B33A-01 3 24 600 RTJ ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16 10 SOCKET WELDING ENDS AS PER ASME B16 11 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 BA3B33A-01 PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BA3B33A-01 3 8 600 RTJ ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BA3B33A-01 10 12 600 RTJ ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC6, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BA3B33A-01 1/2 2 PE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo),DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BA3B33A-01 3 24 BE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr - 1/2% Mo), DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES BA3B33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES BA3B33A-01 3 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES BA3B33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES BA3B33A-01 3 24 BW 80 ALLOY STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 194/761 PIPING CLASS CLASS: BA3B33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATIN G FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 15 CONCENTRIC REDUCER BA3B33A-01 1/2 2 80 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER BA3B33A-01 3 24 BW 80 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER BA3B33A-01 1/2 2 80 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A-234 GR. WP11, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER BA3B33A-01 3 24 BW 80 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CAP BA3B33A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 20 CAP BA3B33A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 CAP BA3B33A-01 3 24 BW 80 ALLOY STEEL, CAP, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER TEE BA3B33A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER TEE BA3B33A-01 3 24 BW 80 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-234 GR. WP11, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BA3B33A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERMSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET BA3B33A-01 3 24 BW 80 ALLOY STEEL, WELDOLET, ASTM A-234 GR. WP11, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG BA3B33A-01 1/2 2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING BA3B33A-01 1/2 2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BA3B33A-01 1/2 2 PE 80 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P11 (1-1/4% Cr -1/2% Mo), DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE BA3B33A-01 1/2 2 600 RTJ 80 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RING JOINT END 30 FLANGE BA3B33A-01 3 24 600 RTJ 80 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F11 CL. 2,DIMENSIONS AS PER ASME B16.5, RING JOINT END 31 BLIND FLANGE BA3B33A-01 1/2 24 600 RTJ ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F11 CL. 2, DIMENSIONS ASPER ASME B16.5, RING JOINT END 32 ORIFICE FLANGE BA3B33A-01 1 2 600 RTJ 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16 36 COMPLETE WITH SPACING JACK SCREWS BOLTS ASTM ABA3B33A 01 ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2, RING JOINT END 33 ORIFICE FLANGE BA3B33A-01 3 24 600 RTJ 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F11 CL. 2, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-182 GR. F11 CL. 2, RING JOINT END 34 FIGURE 8 BA3B33A-01 1/2 12 600 RTJ ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RING JOINT ENDS 35 SPACER RING BA3B33A-01 14 24 600 RTJ ALLOY STEEL, SPACER RING, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RING JOINT ENDS 36 BLIND PLATE BA3B33A-01 14 24 600 RTJ ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 11 CL. 2, DIMENSIONS ASPER ASME B16.5, RING JOINT ENDS 37 DRIP RINGS BA3B33A-01 2 24 600 RTJ ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 11 CL. 2, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 38 GASKET BA3B33A-01 1/2 24 600 RTJ SOFT IRON, OVAL RING GASKET, SOFT IRON 90 BHN MAXIMUM, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 39 BOLTING BA3B33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 195/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BA3B33A-01 ECP-VST-G-GEN-FT-001 196/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 1500 ASTM A 182 GR. F22 CL. 3 / ASTM A 217 GR. WC9 DESIGN TEMPERATURE (°F): From: -20 To: 850 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1500 HYDROTREATED NAPHTHA + HYDROGEN NHH 150 1500 LIGHT NAPHTHA + HYDROGEN NAH 200 1500 300 1455 400 1410 500 1330 600 1210 650 1175 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RTJ PIPING CLASS BB3B33A-01 ANSI RATING 700 1135 750 1065 800 1015 850 975 900 900 950 755 1000 520 1050 350 1100 220 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.10 2.- ASTM A 217 GR. WC9 NORMALIZED AND TEMPERED MATERIAL ONLY. 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 275 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 730 1455 2185 3640 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 375 755 1130 1885 1000 20 260 520 780 1305 1050 ,,, 175 350 525 875 1100 ,,, 110 220 330 550 1150 ,,, 70 135 205 345 1200 ,,, 40 80 125 205 ECP-VST-G-GEN-FT-001 197/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BB3B33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BB3B33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F22, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BB3B33A-01 3 8 600 RTJ ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC9, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BB3B33A-01 10 24 600 RTJ ALLOY STEEL, GATE VALVE, ASTM A-217 GR. WC9, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BB3B33A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F22, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE BB3B33A-01 3 24 600 RTJ ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. WC9, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE BB3B33A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F22, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BB3B33A-01 3 8 600 RTJ ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC9, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BB3B33A-01 10 12 600 RTJ ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. WC9, DIMENSIONS AS PER ASME B16.10, RING JOINT FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BB3B33A-01 1/2 2 PE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P22, DIMENSIONS AS PER ASMEB36.10, PLAIN ENDS 10 PIPE BB3B33A-01 3 24 BE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P22, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES BB3B33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F22, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES BB3B33A-01 3 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP22,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES BB3B33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F22, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES BB3B33A-01 3 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP22,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER BB3B33A-01 1/2 2 160 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP22, DIMENSIONS AS PERMSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER BB3B33A-01 3 24 BW 80 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP22, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER BB3B33A-01 1/2 2 160 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP22, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 198/761 PIPING CLASS CLASS: BB3B33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 18 ECCENTRIC REDUCER BB3B33A-01 3 12 BW 80 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP22, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CAP BB3B33A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F22, DIMENSIONS AS PER ASME B16.11, FEMALETHREADED ENDS AS PER ASME B1.20.1, NPT 20 CAP BB3B33A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F22, DIMENSIONS AS PER ASME B16.11, SOCKETWELDING ENDS AS PER ASME B16.11 21 CAP BB3B33A-01 3 24 BW 80 ALLOY STEEL, CAP, ASTM A 234 GR. WP22, DIMENSIONS AS PER ASME B16.9,BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER TEE BB3B33A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F22, DIMENSIONS ASPER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER TEE BB3B33A-01 3 24 BW 80 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP22, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BB3B33A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F22, DIMENSIONS AS PER MSS-SP-97,SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET BB3B33A-01 3 24 BW 80 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP22, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 26 PLUG BB3B33A-01 1/2 1 1/2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F22, DIMENSIONS AS PERASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING BB3B33A-01 1/2 1 1/2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F22, DIMENSIONS AS PER ASME B16.11,SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BB3B33A-01 1/2 1 1/2 PE 160 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P22, DIMENSIONS AS PERASME B36.10, PLAIN ENDS 29 FLANGE BB3B33A-01 1/2 2 600 RTJ 160 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F22, DIMENSIONS AS PERASME B16.5, RING JOINT FLANGED END 30 FLANGE BB3B33A-01 3 24 600 RTJ 80 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F22, DIMENSIONS AS PERASME B16.5, RING JOINT FLANGED END 31 BLIND FLANGE BB3B33A-01 1 1/2 24 600 RTJ ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F22, DIMENSIONS AS PER ASME B16.5,RING JOINT FLANGED END 32 FIGURE 8 BB3B33A-01 1/2 12 600 RTJ ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 22 CL. 2, DIMENSIONS AS PER ASMEB16.5, RING JOINT ENDS 33 BLIND PLATE BB3B33A-01 14 24 600 RTJ ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 22 CL. 2, DIMENSIONS AS PER ASMEB16.5, RING JOINT ENDS 34 SPACER RING BB3B33A-01 14 24 600 RTJ ALLOY STEEL, SPACER RING, ASTM A-387 GR. 22 CL. 2, DIMENSIONS AS PER ASMEB16.5, RING JOINT ENDS 35 DRIP RINGS BB3B33A 01 2 24 600 RTJ ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1 20 1 ASTM A 387 GR 22 CL 2 DIMENSIONS AS PER ASME B16 5 RING35 DRIP RINGS BB3B33A-01 2 24 600 RTJ PER ASME B1.20.1, ASTM A-387 GR. 22 CL. 2, DIMENSIONS AS PER ASME B16.5, RING JOINT ENDS 36 GASKET BB3B33A-01 1/2 24 600 RTJ STAINLESS STEEL, OVAL RING GASKET, SS 304, 130 BHN MAXIMUM, DIMENSIONS ASPER ASME B16.20, SUITABLE FOR RING JOINT FLANGES ASME B16.5 37 BOLTING BB3B33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 199/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BB3B33A-01 ECP-VST-G-GEN-FT-001 200/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAIINLESS STEEL To: 720 ASTM A-182 GR. F304 H DESIGN TEMPERATURE (°F): From: -300 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -300 to 100 720 FLUE GAS FLU 150 660 200 600 300 540 400 495 500 465 600 435 650 430 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 RF PIPING CLASS CH2A23A-01 ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 650 430 700 425 750 415 800 405 850 395 900 390 950 380 1000 320 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.1 150 300 600 900 1500 -20 to 100 275 720 1440 2160 3600 150 252 660 1320 1980 3300 200 230 600 1200 1800 3000 300 205 540 1080 1620 2700 400 190 495 995 1490 2485 500 170 465 930 1395 2330 600 140 435 875 1310 2185 650 125 430 860 1290 2150 700 110 425 850 1275 2125 750 95 415 830 1245 2075 800 80 405 805 1210 2015 850 65 395 790 1190 1980 900 50 390 780 1165 1945 950 35 380 765 1145 1910 1000 20 320 640 965 1605 1050 ,,, 310 615 925 1545 1100 ,,, 255 515 770 1285 1150 ,,, 200 400 595 995 1200 ,,, 155 310 465 770 ECP-VST-G-GEN-FT-001 201/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CH2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CH2A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F304H, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CH2A23A-01 3 8 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE CH2A23A-01 10 24 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE CH2A23A-01 1/2 2 800 SW STAINLESS STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F304H, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED COVER, STELLITE INTEGRAL SEAT, . STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16 10 RAISED FACE FLANGED ENDS RATING AS PER ASME B16 5 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 5 CHECK VALVE CH2A23A-01 3 24 300 RF B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5,CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE CH2A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F304H, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE CH2A23A-01 3 8 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE CH2A23A-01 10 12 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE CH2A23A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304H, DIMENSIONSAS PER ASME B36.19, PLAIN ENDS 10 PIPE CH2A23A-01 3 12 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304H, DIMENSIONSAS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 11 PIPE CH2A23A-01 14 24 BE 40 (B36.10) STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304H, DIMENSIONSAS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES CH2A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F304H, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES CH2A23A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304H, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 202/761 PIPING CLASS CLASS: CH2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 14 ELBOW 45 DEGREES CH2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304H, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 90 DEGREES CH2A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F304H, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 90 DEGREES CH2A23A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304H, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES CH2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304H, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 CONCENTRIC REDUCER CH2A23A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP304H, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 19 CONCENTRIC REDUCER CH2A23A-01 3 12 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304H,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER CH2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304H,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER CH2A23A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP304H, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER CH2A23A-01 3 12 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP304H,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER CH2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP304H,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 CAP CH2A23A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F304H, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 25 CAP CH2A23A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F304H, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 26 CAP CH2A23A-01 3 12 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP304H, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 CAP CH2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, CAP, ASTM A-403 GR. WP304H, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F304H, 28 STRAIGHT AND REDUCER TEE CH2A23A-01 1/2 2 3000 SW DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 STRAIGHT AND REDUCER TEE CH2A23A-01 3 12 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304H,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE CH2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304H,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 OLET CH2A23A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F304H, DIMENSIONS AS PERMSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 32 OLET CH2A23A-01 3 12 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F304H, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 33 OLET CH2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F304H, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 34 PLUG CH2A23A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F304H, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 COUPLING CH2A23A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304H, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 36 NIPPLE CH2A23A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304H,DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 37 FLANGE CH2A23A-01 1/2 2 300 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F304H,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 38 FLANGE CH2A23A-01 3 12 300 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304H,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 39 FLANGE CH2A23A-01 14 24 300 RF 40 (B36.10) STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304H,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 203/761 PIPING CLASS CLASS: CH2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 40 BLIND FLANGE CH2A23A-01 1 1/2 12 300 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F304H, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END 41 ORIFICE FLANGE CH2A23A-01 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304H, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304H 42 ORIFICE FLANGE CH2A23A-01 3 12 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304H, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304H 43 ORIFICE FLANGE CH2A23A-01 14 24 300 RF 40 (B36.10) STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304H, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304 44 FIGURE 8 CH2A23A-01 1/2 12 300 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 304H, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 45 SPACER RING CH2A23A-01 14 24 300 RF STAINLESS STEEL, SPACER RING, ASTM A-240 GR. 304H, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 46 BLIND PLATE CH2A23A-01 14 24 300 RF STAINLESS STEEL, BLIND PLATE, ASTM A-240 GR. 304H, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 47 DRIP RINGS CH2A23A-01 2 24 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 304H, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 48 GASKET CH2A23A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 49 BOLTING CH2A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B8 CL. 2 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 204/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T W R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CH2A23A-01 ECP-VST-G-GEN-FT-001 205/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL 5 Cr, 1/2 Mo To: 290 ASTM A-182 GR. F5 / ASTM A-182 GR. F5a DESIGN TEMPERATURE (°F): From: -20 ASTM A-217 GR. C5 (NORMALIZED AND TEMPERED ONLY) To: 800 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 290 DIESEL OIL “ACPM” DSO 150 272 HEAVY GASOIL HGO 200 260 HEAVY HYDROCARBON HEY 300 230 400 200 500 170 600 140 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS BC1A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 650 125 700 110 750 95 800 80 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.13 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 747 1495 2243 3737 200 260 745 1490 2235 3725 300 230 715 1430 2150 3580 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1055 1585 2640 800 80 510 1015 1525 2540 850 65 485 965 1450 2415 900 50 370 740 1110 1850 950 35 275 550 825 1370 1000 20 200 400 595 995 1050 ,,, 145 290 430 720 1100 ,,, 100 200 300 495 1150 ,,, 60 125 185 310 1200 ,,, 35 70 105 170 ECP-VST-G-GEN-FT-001 206/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BC1A23A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F5, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BC1A23A-01 3 8 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BC1A23A-01 10 24 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BC1A23A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE BC1A23A-01 3 12 150 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, S S S S S O O G S G PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 6 GLOBE VALVE BC1A23A-01 1/2 2 800 SW TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITEFILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BC1A23A-01 3 8 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BC1A23A-01 10 12 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BC1A23A-01 1/2 2 PE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, PLAIN ENDS 10 PIPE BC1A23A-01 3 8 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 11 PIPE BC1A23A-01 10 24 BE 20 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES BC1A23A-01 1/2 2 3000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES BC1A23A-01 3 8 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 45 DEGREES BC1A23A-01 10 24 BW 20 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 90 DEGREES BC1A23A-01 1/2 2 3000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 90 DEGREES BC1A23A-01 3 8 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES BC1A23A-01 10 24 BW 20 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 CONCENTRIC REDUCER BC1A23A-01 1/2 2 80 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 19 CONCENTRIC REDUCER BC1A23A-01 3 8 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER BC1A23A-01 10 24 BW 20 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER BC1A23A-01 1/2 2 80 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER BC1A23A-01 3 8 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER BC1A23A-01 10 24 BW 20 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 CAP BC1A23A-01 1/2 2 3000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, FEMALETHREADED ENDS AS PER ASME B1.20.1, NPT 25 CAP BC1A23A-01 1/2 2 3000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKETWELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 207/761 PIPING CLASS CLASS: BC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 26 CAP BC1A23A-01 3 8 BW 40 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELEDENDS AS PER ASME B16.25 27 CAP BC1A23A-01 10 24 BW 20 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELEDENDS AS PER ASME B16.25 28 STRAIGHT AND REDUCER TEE BC1A23A-01 1/2 2 3000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 STRAIGHT AND REDUCER TEE BC1A23A-01 3 8 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE BC1A23A-01 10 24 BW 20 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 OLET BC1A23A-01 1/2 2 3000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F5, DIMENSIONS AS PER MSS-SP-97,SOCKET WELDING ENDS AS PER ASME B16.11 32 OLET BC1A23A-01 3 8 BW 40 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 33 OLET BC1A23A-01 10 24 BW 20 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 34 PLUG BC1A23A-01 1/2 2 3000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 COUPLING BC1A23A-01 1/2 2 3000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11,SOCKET WELDING ENDS AS PER ASME B16.11 36 NIPPLE BC1A23A-01 1/2 2 PE 80 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PERASME B36.10, PLAIN ENDS 37 FLANGE BC1A23A-01 1/2 2 150 RF 80 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 38 FLANGE BC1A23A-01 3 8 150 RF 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 39 FLANGE BC1A23A-01 10 24 150 RF 20 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 40 BLIND FLANGE BC1A23A-01 1 1/2 24 150 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.5,RAISED FACE FLANGED END 41 FIGURE 8 BC1A23A-01 1/2 12 150 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 42 BLIND PLATE BC1A23A-01 14 24 150 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 43 SPACER RING BC1A23A-01 14 24 150 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 44 DRIP RINGS BC1A23A-01 2 24 150 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 45 GASKET BC1A23A-01 1/2 24 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16 5B16.5 46 BOLTING BC1A23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 208/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BC1A23A-01 ECP-VST-G-GEN-FT-001 209/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL 5 Cr, 1/2 Mo To: 290 ASTM A-182 GR. F5 / ASTM A-182 GR. F5a DESIGN TEMPERATURE (°F): From: -20 ASTM A-217 GR. C5 (NORMALIZED AND TEMPERED ONLY) To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 290 GASOIL GLS 150 272 HEAVY HYDROCARBON HEY 200 260 300 230 400 200 500 170 600 140 650 125 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: 5-oct-04 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS BC1A33A-01 ANSI RATING 650 125 700 110 750 95 800 80 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.13 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 747 1495 2243 3737 200 260 745 1490 2235 3725 300 230 715 1430 2150 3580 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1055 1585 2640 800 80 510 1015 1525 2540 850 65 485 965 1450 2415 900 50 370 740 1110 1850 950 35 275 550 825 1370 1000 20 200 400 595 995 1050 ,,, 145 290 430 720 1100 ,,, 100 200 300 495 1150 ,,, 60 125 185 310 1200 ,,, 35 70 105 170 ECP-VST-G-GEN-FT-001 210/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BC1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BC1A33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F5, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BC1A33A-01 3 8 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BC1A33A-01 10 24 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BC1A33A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE BC1A33A-01 3 24 150 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, S S S S S O O G S G PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 6 GLOBE VALVE BC1A33A-01 1/2 2 800 SW TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITEFILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BC1A33A-01 3 8 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BC1A33A-01 10 12 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BC1A33A-01 1/2 2 PE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, PLAIN ENDS 10 PIPE BC1A33A-01 3 8 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 11 PIPE BC1A33A-01 10 24 BE 20 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES BC1A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES BC1A33A-01 3 8 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 45 DEGREES BC1A33A-01 10 24 BW 20 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 90 DEGREES BC1A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 90 DEGREES BC1A33A-01 3 8 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES BC1A33A-01 10 24 BW 20 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 CONCENTRIC REDUCER BC1A33A-01 1/2 2 160 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 19 CONCENTRIC REDUCER BC1A33A-01 3 8 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER BC1A33A-01 10 24 BW 20 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER BC1A33A-01 1/2 2 160 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER BC1A33A-01 3 8 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER BC1A33A-01 10 24 BW 20 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 211/761 PIPING CLASS CLASS: BC1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 24 CAP BC1A33A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, FEMALETHREADED ENDS AS PER ASME B1.20.1, NPT 25 CAP BC1A33A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKETWELDING ENDS AS PER ASME B16.11 26 CAP BC1A33A-01 3 8 BW 40 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELEDENDS AS PER ASME B16.25 27 CAP BC1A33A-01 10 24 BW 20 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELEDENDS AS PER ASME B16.25 28 STRAIGHT AND REDUCER TEE BC1A33A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 STRAIGHT AND REDUCER TEE BC1A33A-01 3 8 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE BC1A33A-01 10 24 BW 20 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 OLET BC1A33A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F5, DIMENSIONS AS PER MSS-SP-97,SOCKET WELDING ENDS AS PER ASME B16.11 32 OLET BC1A33A-01 3 8 BW 40 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 33 OLET BC1A33A-01 10 24 BW 20 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 34 PLUG BC1A33A-01 1/2 2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 COUPLING BC1A33A-01 1/2 2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11,SOCKET WELDING ENDS AS PER ASME B16.11 36 NIPPLE BC1A33A-01 1/2 2 PE 160 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PERASME B36.10, PLAIN ENDS 37 FLANGE BC1A33A-01 1/2 2 150 RF 160 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 38 FLANGE BC1A33A-01 3 8 150 RF 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 39 FLANGE BC1A33A-01 10 24 150 RF 20 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 40 BLIND FLANGE BC1A33A-01 1 1/2 24 150 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.5,RAISED FACE FLANGED END 41 FIGURE 8 BC1A33A-01 1/2 12 150 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 42 BLIND PLATE BC1A33A-01 14 24 150 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 43 SPACER RING BC1A33A-01 14 24 150 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 44 DRIP RINGS BC1A33A-01 2 24 150 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDSENDS 45 GASKET BC1A33A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 46 BOLTING BC1A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 212/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BC2A23A-01 ECP-VST-G-GEN-FT-001 213/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL 5 Cr, 1/2 Mo To: 290 ASTM A-182 GR. F5 / ASTM A-182 GR. F5a DESIGN TEMPERATURE (°F): From: -20 ASTM A-217 GR. C5 (NORMALIZED AND TEMPERED ONLY) To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 290 MEDIUM PRESSURE STEAM MPS 150 272 200 260 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 850 65 900 50 950 35 1000 20 5-oct-04 RF PIPING CLASS BC1A53A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/4" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.13 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 747 1495 2243 3737 200 260 745 1490 2235 3725 300 230 715 1430 2150 3580 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1055 1585 2640 800 80 510 1015 1525 2540 850 65 485 965 1450 2415 900 50 370 740 1110 1850 950 35 275 550 825 1370 1000 20 200 400 595 995 1050 ,,, 145 290 430 720 1100 ,,, 100 200 300 495 1150 ,,, 60 125 185 310 1200 ,,, 35 70 105 170 ECP-VST-G-GEN-FT-001 214/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BC1A53A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BC1A53A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F5, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BC1A53A-01 3 8 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BC1A53A-01 10 24 150 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BC1A53A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE BC1A53A-01 3 24 150 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . ALLOY STEEL GLOBE VALVE ASTM A 182 GR F5 DIMENSIONS AS PER ASME B16 10 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 6 GLOBE VALVE BC1A53A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BC1A53A-01 3 8 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BC1A53A-01 10 24 150 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BC1A53A-01 1/2 2 PE XXS ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, PLAIN ENDS 10 PIPE BC1A53A-01 3 3 BE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 11 PIPE BC1A53A-01 4 6 BE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 12 PIPE BC1A53A-01 8 24 BE 60 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 45 DEGREES BC1A53A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 45 DEGREES BC1A53A-01 3 3 BW 160 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES BC1A53A-01 4 6 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 45 DEGREES BC1A53A-01 8 24 BW 60 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES BC1A53A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 18 ELBOW 90 DEGREES BC1A53A-01 3 3 BW 160 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 90 DEGREES BC1A53A-01 4 6 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 ELBOW 90 DEGREES BC1A53A-01 8 24 BW 60 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 CONCENTRIC REDUCER BC1A53A-01 1/2 2 XXS ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PERMSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 22 CONCENTRIC REDUCER BC1A53A-01 3 3 BW 160 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 215/761 PIPING CLASS CLASS: BC1A53A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 23 CONCENTRIC REDUCER BC1A53A-01 4 6 BW 80 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 CONCENTRIC REDUCER BC1A53A-01 8 24 BW 60 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 ECCENTRIC REDUCER BC1A53A-01 1/2 2 XXS ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 26 ECCENTRIC REDUCER BC1A53A-01 3 3 BW 160 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 ECCENTRIC REDUCER BC1A53A-01 4 6 BW 80 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 ECCENTRIC REDUCER BC1A53A-01 8 24 BW 60 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 CAP BC1A53A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, FEMALETHREADED ENDS AS PER ASME B1.20.1, NPT 30 CAP BC1A53A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKETWELDING ENDS AS PER ASME B16.11 31 CAP BC1A53A-01 3 3 BW 160 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9,BEVELED ENDS AS PER ASME B16.25 32 CAP BC1A53A-01 4 6 BW 80 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9,BEVELED ENDS AS PER ASME B16.25 33 CAP BC1A53A-01 8 24 BW 60 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9,BEVELED ENDS AS PER ASME B16.25 34 STRAIGHT AND REDUCER TEE BC1A53A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 35 STRAIGHT AND REDUCER TEE BC1A53A-01 3 3 BW 160 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 36 STRAIGHT AND REDUCER TEE BC1A53A-01 4 6 BW 80 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 37 STRAIGHT AND REDUCER TEE BC1A53A-01 8 24 BW 60 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 38 OLET BC1A53A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F5, DIMENSIONS AS PER MSS-SP-97,SOCKET WELDING ENDS AS PER ASME B16.11 39 OLET BC1A53A-01 3 3 BW 160 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 40 OLET BC1A53A-01 4 6 BW 80 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 41 OLET BC1A53A-01 8 24 BW 60 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 42 PLUG BC1A53A-01 1/2 1 1/2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT ALLOY STEEL COUPLING ASTM A-182 GR F5 DIMENSIONS AS PER ASME B16 1143 COUPLING BC1A53A-01 1/2 1 1/2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11,SOCKET WELDING ENDS AS PER ASME B16.11 44 NIPPLE BC1A53A-01 1/2 1 1/2 PE XXS ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PERASME B36.10, PLAIN ENDS 45 FLANGE BC1A53A-01 1/2 2 150 RF XXS ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 46 FLANGE BC1A53A-01 3 3 150 RF 160 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 47 FLANGE BC1A53A-01 4 6 150 RF 80 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 48 FLANGE BC1A53A-01 8 24 150 RF 60 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 49 BLIND FLANGE BC1A53A-01 1 1/2 24 150 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.5,RAISED FACE FLANGED END 50 FIGURE 8 BC1A53A-01 1/2 12 150 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 51 BLIND PLATE BC1A53A-01 14 24 150 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 52 SPACER RING BC1A53A-01 14 24 150 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 53 DRIP RINGS BC1A53A-01 2 24 150 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 54 GASKET BC1A53A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 55 BOLTING BC1A53A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 216/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BC1A53A-01 ECP-VST-G-GEN-FT-001 217/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL 5 Cr, 1/2 Mo To: 750 ASTM A-182 GR. F5 / ASTM A-182 GR. F5a DESIGN TEMPERATURE (°F): From: -20 ASTM A-217 GR. C5 (NORMALIZED AND TEMPERED ONLY) To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 750 DIESEL OIL “ACPM” DSO 150 747 HEAVY GASOIL HGO 200 745 HEAVY HYDROCARBON HEY 300 715 400 705 500 665 600 605 650 590 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS BC2A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 650 590 700 570 750 530 800 510 850 485 900 370 950 275 1000 200 1050 145 1100 100 1150 60 1200 35 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.13 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 747 1495 2243 3737 200 260 745 1490 2235 3725 300 230 715 1430 2150 3580 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1055 1585 2640 800 80 510 1015 1525 2540 850 65 485 965 1450 2415 900 50 370 740 1110 1850 950 35 275 550 825 1370 1000 20 200 400 595 995 1050 ,,, 145 290 430 720 1100 ,,, 100 200 300 495 1150 ,,, 60 125 185 310 1200 ,,, 35 70 105 170 ECP-VST-G-GEN-FT-001 218/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BC2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BC2A23A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F5, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BC2A23A-01 3 8 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BC2A23A-01 10 24 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BC2A23A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE BC2A23A-01 3 24 300 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE BC2A23A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BC2A23A-01 3 8 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ALLOY STEEL GLOBE VALVE ASTM A 217 GR C5 DIMENSIONS AS PER ASME PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 8 GLOBE VALVE BC2A23A-01 10 24 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BC2A23A-01 1/2 2 PE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, PLAIN ENDS 10 PIPE BC2A23A-01 3 24 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES BC2A23A-01 1/2 2 3000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES BC2A23A-01 3 24 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES BC2A23A-01 1/2 2 3000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES BC2A23A-01 3 24 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER BC2A23A-01 1/2 2 80 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PERMSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER BC2A23A-01 3 24 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER BC2A23A-01 1/2 2 80 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PERMSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER BC2A23A-01 3 24 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CAP BC2A23A-01 1/2 2 3000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, FEMALETHREADED ENDS AS PER ASME B1.20.1, NPT 20 CAP BC2A23A-01 1/2 2 3000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 CAP BC2A23A-01 3 24 BW 40 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9,BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER TEE BC2A23A-01 1/2 2 3000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER TEE BC2A23A-01 3 24 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONSAS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BC2A23A-01 1/2 2 3000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F5, DIMENSIONS AS PER MSS-SP-97,SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET BC2A23A-01 3 24 BW 40 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 26 PLUG BC2A23A-01 1/2 2 3000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 219/761 PIPING CLASS CLASS: BC2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 27 COUPLING BC2A23A-01 1/2 2 3000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11,SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BC2A23A-01 1/2 2 PE 80 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PERASME B36.10, PLAIN ENDS 29 FLANGE BC2A23A-01 1/2 2 300 RF 80 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END 30 FLANGE BC2A23A-01 3 24 300 RF 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 31 BLIND FLANGE BC2A23A-01 1 1/2 24 300 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASMEB16.5, RAISED FACE FLANGED END 32 FIGURE 8 BC2A23A-01 1/2 12 300 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 5, DIMENSIONS AS PER ASMEB16.5, RAISED FACE ENDS BLIND PLATE BC2A23A-01 14 24 150 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS SPACER RING BC2A23A-01 14 24 150 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 33 DRIP RINGS BC2A23A-01 2 24 300 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 34 GASKET BC2A23A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 35 BOLTING BC2A23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 220/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BC2A23A-01 ECP-VST-G-GEN-FT-001 221/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL 5 Cr, 1/2 Mo To: 750 ASTM A-182 GR. F5 / ASTM A-182 GR. F5a DESIGN TEMPERATURE (°F): From: -20 ASTM A-217 GR. C5 (NORMALIZED AND TEMPERED ONLY) To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 750 GASOIL GLS 150 747 FLUSHING OIL FLO 200 745 HEAVY HYDROCARBON HEY 300 715 400 705 500 665 600 605 5-oct-04 RF PIPING CLASS BC2A33A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 650 590 700 570 750 530 800 510 850 485 900 370 950 275 1000 200 1050 145 1100 100 1150 60 1200 35 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.13 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 747 1495 2243 3737 200 260 745 1490 2235 3725 300 230 715 1430 2150 3580 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1055 1585 2640 800 80 510 1015 1525 2540 850 65 485 965 1450 2415 900 50 370 740 1110 1850 950 35 275 550 825 1370 1000 20 200 400 595 995 1050 ,,, 145 290 430 720 1100 ,,, 100 200 300 495 1150 ,,, 60 125 185 310 1200 ,,, 35 70 105 170 ECP-VST-G-GEN-FT-001 222/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BC2A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BC2A33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F5, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BC2A33A-01 3 8 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BC2A33A-01 10 24 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BC2A33A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 INTEGRAL SEAT, . 5 CHECK VALVE BC2A33A-01 3 24 300 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE BC2A33A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BC2A33A-01 3 8 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BC2A33A-01 10 24 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BC2A33A-01 1/2 2 PE XXS ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONSAS PER ASME B36.10, PLAIN ENDS 10 PIPE BC2A33A-01 3 24 BE 40 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONSAS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 223/761 PIPING CLASS CLASS: BC2A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 11 ELBOW 45 DEGREES BC2A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES BC2A33A-01 3 24 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES BC2A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES BC2A33A-01 3 24 BW 40 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER BC2A33A-01 1/2 2 XXS ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER BC2A33A-01 3 24 BW 40 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER BC2A33A-01 1/2 2 XXS ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER BC2A33A-01 3 24 BW 40 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CAP BC2A33A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ALLOY STEEL CAP ASTM A 182 GR F5 DIMENSIONS AS PER20 CAP BC2A33A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 CAP BC2A33A-01 3 24 BW 40 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER TEE BC2A33A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER TEE BC2A33A-01 3 24 BW 40 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BC2A33A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F5, DIMENSIONS ASPER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET BC2A33A-01 3 24 BW 40 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS ASPER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG BC2A33A-01 1/2 2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING BC2A33A-01 1/2 2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BC2A33A-01 1/2 2 PE XXS ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P5,DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE BC2A33A-01 1/2 2 300 RF XXS ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F5,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 30 FLANGE BC2A33A-01 3 24 300 RF 40 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 224/761 PIPING CLASS CLASS: BC2A33A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 31 BLIND FLANGE BC2A33A-01 1 1/2 24 300 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F5, DIMENSIONSAS PER ASME B16.5, RAISED FACE FLANGED END 32 FIGURE 8 BC2A33A-01 1/2 12 300 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 5, DIMENSIONSAS PER ASME B16.5, RAISED FACE ENDS BLIND PLATE BC2A33A-01 14 24 300 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 5, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS SPACER RING BC2A33A-01 14 24 300 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 5, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 33 DRIP RINGS BC2A33A-01 2 24 300 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 34 GASKET BC2A33A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 35 BOLTING BC2A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 225/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BC2A33A-01 ECP-VST-G-GEN-FT-001 226/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL 5 Cr, 1/2 Mo To: 750 ASTM A-182 GR. F5 / ASTM A-182 GR. F5a DESIGN TEMPERATURE (°F): From: -20 ASTM A-217 GR. C5 (NORMALIZED AND TEMPERED ONLY) To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 750 MEDIUM PRESSURE STEAM MPS 150 747 200 745 300 715 400 705 500 665 600 605 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/4" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS BC2A53A-01 ANSI RATING 650 590 700 570 750 530 800 510 850 485 900 370 950 275 1000 200 1050 145 1100 100 1150 60 1200 35 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.13 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 747 1495 2243 3737 200 260 745 1490 2235 3725 300 230 715 1430 2150 3580 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1055 1585 2640 800 80 510 1015 1525 2540 850 65 485 965 1450 2415 900 50 370 740 1110 1850 950 35 275 550 825 1370 1000 20 200 400 595 995 1050 ,,, 145 290 430 720 1100 ,,, 100 200 300 495 1150 ,,, 60 125 185 310 1200 ,,, 35 70 105 170 ECP-VST-G-GEN-FT-001 227/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BC2A53A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BC2A53A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F5, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE BC2A53A-01 3 8 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE BC2A53A-01 10 24 300 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE BC2A53A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE BC2A53A-01 3 24 300 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE BC2A53A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 7 GLOBE VALVE BC2A53A-01 3 8 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE BC2A53A-01 10 24 300 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE BC2A53A-01 1/2 2 PE XXS ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, PLAIN ENDS 10 PIPE BC2A53A-01 3 4 BE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 11 PIPE BC2A53A-01 6 24 BE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASMEB36.10, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES BC2A53A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES BC2A53A-01 3 4 BW 160 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 45 DEGREES BC2A53A-01 6 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 90 DEGREES BC2A53A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 90 DEGREES BC2A53A-01 3 4 BW 160 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES BC2A53A-01 6 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 CONCENTRIC REDUCER BC2A53A-01 1/2 2 XXS ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PERMSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 19 CONCENTRIC REDUCER BC2A53A-01 3 4 BW 160 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER BC2A53A-01 6 24 BW 80 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER BC2A53A-01 1/2 2 XXS ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PERMSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER BC2A53A-01 3 4 BW 160 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 228/761 PIPING CLASS CLASS: BC2A53A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 23 ECCENTRIC REDUCER BC2A53A-01 6 24 BW 80 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 CAP BC2A53A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, FEMALETHREADED ENDS AS PER ASME B1.20.1, NPT 25 CAP BC2A53A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKETWELDING ENDS AS PER ASME B16.11 26 CAP BC2A53A-01 3 4 BW 160 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9,BEVELED ENDS AS PER ASME B16.25 27 CAP BC2A53A-01 6 24 BW 80 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9,BEVELED ENDS AS PER ASME B16.25 28 STRAIGHT AND REDUCER TEE BC2A53A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 STRAIGHT AND REDUCER TEE BC2A53A-01 3 4 BW 160 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONSAS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE BC2A53A-01 6 24 BW 80 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONSAS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 OLET BC2A53A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F5, DIMENSIONS AS PER MSS-SP-97,SOCKET WELDING ENDS AS PER ASME B16.11 32 OLET BC2A53A-01 3 4 BW 160 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 33 OLET BC2A53A-01 6 12 BW 80 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97,BEVELED ENDS AS PER ASME B16.25 34 PLUG BC2A53A-01 1/2 2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 COUPLING BC2A53A-01 1/2 2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11,SOCKET WELDING ENDS AS PER ASME B16.11 36 NIPPLE BC2A53A-01 1/2 2 PE XXS ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PERASME B36.10, PLAIN ENDS 37 FLANGE BC2A53A-01 1/2 2 300 RF XXS ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F5, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END 38 FLANGE BC2A53A-01 3 4 300 RF 160 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 39 FLANGE BC2A53A-01 6 24 300 RF 80 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PERASME B16.5, RAISED FACE FLANGED END 40 BLIND FLANGE BC2A53A-01 1 1/2 24 300 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASMEB16.5, RAISED FACE FLANGED END 41 FIGURE 8 BC2A53A-01 1/2 12 300 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 5, DIMENSIONS AS PER ASMEB16.5, RAISED FACE ENDS 42 BLIND PLATE BC2A53A-01 14 24 300 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 43 SPACER RING BC2A53A-01 14 24 300 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5,RAISED FACE ENDS 44 DRIP RINGS BC2A53A-01 2 24 300 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND S SS S C G G C SS / C S S45 GASKET BC2A53A-01 1/2 24 300 RF STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 46 BOLTING BC2A53A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 229/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T Versión 1 BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BC2A53A-01 ECP-VST-G-GEN-FT-001 230/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL 5 Cr, 1/2 Mo To: 1500 ASTM A-182 GR. F5 / ASTM A-182 GR. F5a DESIGN TEMPERATURE (°F): From: -20 ASTM A-217 GR. C5 (NORMALIZED AND TEMPERED ONLY) To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1500 GASOIL GLS 150 1495 FLUSHING OIL FLO 200 1490 HEAVY HYDROCARBON HEY 300 1430 400 1410 500 1330 600 1210 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS BC3A33A-01 ANSI RATING 650 1175 700 1135 750 1055 800 1015 850 965 900 740 950 550 1000 400 1050 290 1100 200 1150 125 1200 70 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.13 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 747 1495 2243 3737 200 260 745 1490 2235 3725 300 230 715 1430 2150 3580 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1055 1585 2640 800 80 510 1015 1525 2540 850 65 485 965 1450 2415 900 50 370 740 1110 1850 950 35 275 550 825 1370 1000 20 200 400 595 995 1050 ,,, 145 290 430 720 1100 ,,, 100 200 300 495 1150 ,,, 60 125 185 310 1200 ,,, 35 70 105 170 ECP-VST-G-GEN-FT-001 231/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BC3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BC3A33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F5, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ALLOY STEEL GATE VALVE ASTM A 217 GR C5 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 2 GATE VALVE BC3A33A-01 3 8 600 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 232/761 PIPING CLASS CLASS: BC3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 3 GATE VALVE BC3A33A-01 10 24 600 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C5, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, 4 CHECK VALVE BC3A33A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT, . ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION ASTM A-217 GR C5 5 CHECK VALVE BC3A33A-01 3 24 600 RF INSTALLATION, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . ECP-VST-G-GEN-FT-001 233/761 PIPING CLASS CLASS: BC3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 6 GLOBE VALVE BC3A33A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE BC3A33A-01 3 8 600 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE ALLOY STEEL GLOBE VALVE ASTM A-217 GR 8 GLOBE VALVE BC3A33A-01 10 12 600 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C5, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE 9 PIPE BC3A33A-01 1/2 2 PE XXS ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BC3A33A-01 3 24 BE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P5, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES BC3A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 234/761 PIPING CLASS CLASS: BC3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 12 ELBOW 45 DEGREES BC3A33A-01 3 12 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES BC3A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 90 DEGREES BC3A33A-01 3 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER BC3A33A-01 1/2 2 XXS ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER BC3A33A-01 3 24 BW 80 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ALLOY STEEL ECCENTRIC SWAGE ASTM A 234 17 ECCENTRIC REDUCER BC3A33A-01 1/2 2 XXS ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER BC3A33A-01 3 24 BW 80 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CAP BC3A33A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 20 CAP BC3A33A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 235/761 PIPING CLASS CLASS: BC3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 21 CAP BC3A33A-01 3 24 BW 80 ALLOY STEEL, CAP, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER BC3A33A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER BC3A33A-01 3 24 BW 80 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP5, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BC3A33A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F5, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET BC3A33A-01 3 24 BW 80 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP5, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG BC3A33A-01 1/2 1 1/2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING BC3A33A-01 1/2 1 1/2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BC3A33A-01 1/2 1 1/2 PE XXS ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 335 GR. P5, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE BC3A33A-01 1/2 2 600 RF XXS ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 236/761 PIPING CLASS CLASS: BC3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 30 FLANGE BC3A33A-01 3 24 RF 80 ALLOY STEEL, WELDING NECK FLANGE, ASTM A- 182 GR. F5, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 31 BLIND FLANGE BC3A33A-01 1 1/2 24 600 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F5, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 32 FIGURE 8 BC3A33A-01 1/2 12 600 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS BLIND PLATE BC3A33A-01 14 24 150 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS SPACER RING BC3A33A-01 14 24 150 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 33 DRIP RINGS BC3A33A-01 2 24 600 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-387 GR. 5, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 34 GASKET BC3A33A-01 1/2 24 600 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME 35 BOLTING BC3A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, NOTES: ECP-VST-G-GEN-FT-001 237/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BC3A33A-01 ECP-VST-G-GEN-FT-001 238/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY STEEL To: 1500 ASTM A-182 GR. F9 / ASTM A-217 GR. C12 DESIGN TEMPERATURE (°F): From: -20 To: 850 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1500 DECOKING. INLET & OUTLET SECTIONS OF VISBREAKING HEATERS DEK 150 1500 200 1500 300 1455 400 1410 500 1330 600 1210 650 1175 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS BD3A33A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: 700 1135 750 1065 800 1015 850 975 900 900 950 755 1000 505 1050 345 1100 225 1150 150 1200 105 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.14 2.- ASTM A-217 GR. C12 NORMALIZED AND TEMPERED ONLY. 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 272 750 1500 2250 3750 200 260 750 1500 2250 3750 300 230 730 1455 2185 3640 400 200 705 1410 2115 3530 500 170 665 1330 1995 3325 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 65 485 975 1460 2435 900 50 450 900 1350 2245 950 35 375 755 1130 1885 1000 20 255 505 760 1270 1050 ,,, 170 345 515 855 1100 ,,, 115 225 340 565 1150 ,,, 75 150 225 375 1200 ,,, 50 105 155 255 ECP-VST-G-GEN-FT-001 239/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: BD3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE BD3A33A-01 1/2 2 800 SW ALLOY STEEL, GATE VALVE, ASTM A-182 GR. F9, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 9Cr-1Mo, AISI 304 SPIRAL WOUND BONNET GASKET CERAMIC FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, PACKING SUITABLE FOR 1150°F AND REPLACEABLE UNDER PRESSURE., HANDWHEEL 2 GATE VALVE BD3A33A-01 3 8 600 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C12, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 9Cr-1Mo, AISI 304 SPIRAL WOUND BONNET GASKET CERAMIC FILLER OR PTFE GASKET, BOLTED BONNET OUTSIDE SCREW AND YOKE FLEXIBLE WEDGE PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, PACKING SUITABLE FOR 1150°F AND REPLACEABLE UNDER PRESSURE., HANDWHEEL 3 GATE VALVE BD3A33A-01 10 24 600 RF ALLOY STEEL, GATE VALVE, ASTM A-217 GR. C12, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 9Cr-1Mo, AISI 304 SPIRAL WOUND BONNET GASKET CERAMIC FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, PACKING SUITABLE FOR 1150°F AND REPLACEABLE UNDER PRESSURE., GEAR OPERATOR ECP-VST-G-GEN-FT-001 240/761 PIPING CLASS CLASS: BD3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 4 CHECK VALVE BD3A33A-01 1/2 2 800 SW ALLOY STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F9, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 9Cr-1Mo, AISI 304 SPIRAL WOUND BONNET GASKET CERAMIC FILLER OR PTFE GASKET, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE BD3A33A-01 3 24 600 RF ALLOY STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-217 GR. C12, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 9Cr-1Mo, AISI 304 SPIRAL WOUND BONNET 6 GLOBE VALVE BD3A33A-01 1/2 2 800 SW ALLOY STEEL, GLOBE VALVE, ASTM A-182 GR. F9, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 9Cr-1Mo, AISI 304 SPIRAL WOUND BONNET GASKET CERAMIC FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C12, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED 7 GLOBE VALVE BD3A33A-01 3 8 600 RF DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 9Cr-1Mo, AISI 304 SPIRAL WOUND BONNET GASKET CERAMIC FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, PACKING SUITABLE FOR 1150°F AND REPLACEABLE UNDER PRESSURE., HANDWHEEL 8 GLOBE VALVE BD3A33A-01 10 12 600 RF ALLOY STEEL, GLOBE VALVE, ASTM A-217 GR. C12, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 9Cr-1Mo, AISI 304 SPIRAL WOUND BONNET GASKET CERAMIC FILLER OR PTFE GASKET, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, PACKING SUITABLE FOR 1150°F AND REPLACEABLE UNDER PRESSURE., GEAR OPERATOR ECP-VST-G-GEN-FT-001 241/761 PIPING CLASS CLASS: BD3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 9 PIPE BD3A33A-01 1/2 2 PE 160 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P9,DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 10 PIPE BD3A33A-01 3 24 BE 80 ALLOY STEEL, SEAMLESS PIPE, ASTM A-335 GR. P9,DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER 11 ELBOW 45 DEGREES BD3A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F9, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES BD3A33A-01 3 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP9, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES BD3A33A-01 1/2 2 6000 SW ALLOY STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F9,DIMENSIONS AS PER ASME B16.11, SOCKET WELDING 14 ELBOW 90 DEGREES BD3A33A-01 3 24 BW 80 ALLOY STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WP9, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER BD3A33A-01 1/2 2 160 ALLOY STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WP9,DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED 16 CONCENTRIC REDUCER BD3A33A-01 3 24 BW 80 ALLOY STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WP9, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER BD3A33A-01 1/2 2 160 ALLOY STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WP9,DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED 18 ECCENTRIC REDUCER BD3A33A-01 3 12 BW 80 ALLOY STEEL, ECCENTRIC REDUCER, ASTM A 234 GR.WP9 DIMENSIONS AS PER ASME B16 9 BEVELED ENDS AS18 ECCENTRIC REDUCER BD3A33A 01 3 12 BW 80 WP9, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS 19 CAP BD3A33A-01 1/2 2 6000 THD ALLOY STEEL, CAP, ASTM A-182 GR. F9, DIMENSIONS ASPER ASME B16.11, FEMALE THREADED ENDS AS PER ASME 20 CAP BD3A33A-01 1/2 2 6000 SW ALLOY STEEL, CAP, ASTM A-182 GR. F9, DIMENSIONS ASPER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 21 CAP BD3A33A-01 3 24 BW 80 ALLOY STEEL, CAP, ASTM A 234 GR. WP9, DIMENSIONS ASPER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 STRAIGHT AND REDUCER TEE BD3A33A-01 1/2 2 6000 SW ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182GR. F9, DIMENSIONS AS PER ASME B16.11, SOCKET 23 STRAIGHT AND REDUCER TEE BD3A33A-01 3 24 BW 80 ALLOY STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WP9, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET BD3A33A-01 1/2 2 6000 SW ALLOY STEEL, SOCKOLET, ASTM A-182 GR. F9, DIMENSIONSAS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME 25 OLET BD3A33A-01 3 24 BW 80 ALLOY STEEL, WELDOLET, ASTM A 234 GR. WP9, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 242/761 PIPING CLASS CLASS: BD3A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 26 PLUG BD3A33A-01 1/2 1 1/2 6000 THD ALLOY STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR.F9, DIMENSIONS AS PER ASME B16.11, MALE THREADED 27 COUPLING BD3A33A-01 1/2 1 1/2 6000 SW ALLOY STEEL, COUPLING, ASTM A-182 GR. F9, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 NIPPLE BD3A33A-01 1/2 1 1/2 PE 160 ALLOY STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-335 GR.P9, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 29 FLANGE BD3A33A-01 1/2 2 600 RF 160 ALLOY STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F9, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 30 FLANGE BD3A33A-01 3 24 600 RF 80 ALLOY STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F9, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 31 BLIND FLANGE BD3A33A-01 1 1/2 24 600 RF ALLOY STEEL, BLIND FLANGE, ASTM A-182 GR. F9, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 32 FIGURE 8 BD3A33A-01 1/2 12 600 RF ALLOY STEEL, FIGURE 8 BLIND, ASTM A-387 GR. 91,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 33 BLIND PLATE BD3A33A-01 14 24 600 RF ALLOY STEEL, BLIND PLATE, ASTM A-387 GR. 91,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 34 SPACER RING BD3A33A-01 14 24 600 RF ALLOY STEEL, SPACER RING, ASTM A-387 GR. 91,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 35 DRIP RINGS BD3A33A 01 2 24 600 RF ALLOY STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1 20 1 ASTM A35 DRIP RINGS BD3A33A-01 2 24 600 RF RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A- 387 GR. 9, DIMENSIONS AS PER ASME B16.5, RAISED FACE 36 GASKET BD3A33A-01 1/2 12 600 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH CERAMIC FILLER AND STAINLESS STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 37 BOLTING BD3A33A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B5 / ASTM A 194 GR. 3, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 243/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: BD3A33A-01 ECP-VST-G-GEN-FT-001 244/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 230 ASTM A-182 GR. F316L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 230 AMINE (Di-Ethil-Amine) DEA 150 212 AMINE (Mono-Ethil-Amine) MEA 200 195 AMINE CLOSED DRAIN, AMMONIUM HYDROXIDE ADH 300 175 LIGHT GASOIL LGO 400 160 500 145 600 140 650 125 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS CB1A03A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/100" FLANGE FINISH DATE: 5-oct-04 700 110 750 95 800 80 850 65 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 245/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CB1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CB1A03A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, 2 GATE VALVE CB1A03A-01 3 6 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3M (AISI 316L), ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, 3 CHECK VALVE CB1A03A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL ECP-VST-G-GEN-FT-001 246/761 PIPING CLASS CLASS: CB1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 4 CHECK VALVE CB1A03A-01 3 6 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET 5 GLOBE VALVE CB1A03A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, 6 GLOBE VALVE CB1A03A-01 3 6 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE 7 PIPE CB1A03A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR.TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN 8 PIPE CB1A03A-01 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 9 ELBOW 45 DEGREES CB1A03A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 10 ELBOW 45 DEGREES CB1A03A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME 11 ELBOW 90 DEGREES CB1A03A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 247/761 PIPING CLASS CLASS: CB1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 12 ELBOW 90 DEGREES CB1A03A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME 13 CONCENTRIC REDUCER CB1A03A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME 14 CONCENTRIC REDUCER CB1A03A-01 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ECCENTRIC REDUCER CB1A03A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR 16 ECCENTRIC REDUCER CB1A03A-01 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 REDUCER INSERT CB1A03A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME 18 CAP CB1A03A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F316L,DIMENSIONS AS PER ASME B16.11, FEMALE 19 CAP CB1A03A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F316L,19 CAP CB1A03A-01 1/2 2 3000 SW DIMENSIONS AS PER ASME B16.11, SOCKET 20 CAP CB1A03A-01 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS 21 STRAIGHT AND REDUCER TEE CB1A03A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 22 STRAIGHT AND REDUCER TEE CB1A03A-01 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 OLET CB1A03A-01 1/2 2 3000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 24 OLET CB1A03A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR.F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET ECP-VST-G-GEN-FT-001 248/761 PIPING CLASS CLASS: CB1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 25 OLET CB1A03A-01 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR.F316L, DIMENSIONS AS PER MSS-SP-97, BEVELED 26 PLUG CB1A03A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING CB1A03A-01 1/2 2 3000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING CB1A03A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR.F316L, DIMENSIONS AS PER ASME B16.11, SOCKET 29 HALF COUPLING CB1A03A-01 1/2 2 3000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 30 HALF COUPLING CB1A03A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 31 NIPPLE CB1A03A-01 1/2 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 32 NIPPLE CB1A03A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, 33 FLANGE CB1A03A-01 1/2 2 150 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE,ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME 34 FLANGE CB1A03A-01 3 6 150 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, 35 BLIND FLANGE CB1A03A-01 1/2 6 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR.F316L, DIMENSIONS AS PER ASME B16.5, RAISED 36 ORIFICE FLANGE CB1A03A-01 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 ECP-VST-G-GEN-FT-001 249/761 PIPING CLASS CLASS: CB1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 37 ORIFICE FLANGE CB1A03A-01 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 38 FIGURE 8 CB1A03A-01 1/2 6 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR.316L, DIMENSIONS AS PER ASME B16.5, RAISED 39 DRIP RINGS CB1A03A-01 2 6 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 316L, DIMENSIONS AS PER 40 GASKET CB1A03A-01 1/2 6 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316L SS, DIMENSIONS AS PER ASME B16.20, 41 BOLTING CB1A03A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER NOTES: ECP-VST-G-GEN-FT-001 250/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CB1A03A-01 ECP-VST-G-GEN-FT-001 251/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 230 ASTM A-182 GR. F316L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 230 AMMONIUM CARBONATE ACB 150 212 AMMONIUM CHLORIDE ACL 200 195 AMMONIUM SULPHATE ASU 300 175 CHEMICALS QUI 400 160 CYCLOHEXANE CIC 500 145 GLYCOL GLY 600 140 HYDROGEN SULPHIDE SUA 650 125 JET FUEL JET PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS CB1A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 700 110 LIGHT GASOIL LGO 750 95 MERCAPTAN MER 800 80 PEROXIDE LLPE 850 65 PROPANOL PPL NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 252/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CB1A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3M (AISI 316L), ACCORDING TO API 603, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 2 GATE VALVE CB1A23A-01 3 6 150 RF CF3M (AISI 316L), ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE ECP-VST-G-GEN-FT-001 253/761 PIPING CLASS CLASS: CB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 3 CHECK VALVE CB1A23A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, . 4 CHECK VALVE CB1A23A-01 3 6 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 5 GLOBE VALVE CB1A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 254/761 PIPING CLASS CLASS: CB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 6 GLOBE VALVE CB1A23A-01 3 6 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, 7 PIPE CB1A23A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312GR. TP316L, DIMENSIONS AS PER ASME B36.19, 8 PIPE CB1A23A-01 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 9 ELBOW 45 DEGREES CB1A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 10 ELBOW 45 DEGREES CB1A23A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS ASTM A-403 GR WP 316L DIMENSIONS AS10 ELBOW 45 DEGREES CB1A23A-01 3 6 BW 40S RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME 11 ELBOW 90 DEGREES CB1A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 90 DEGREES CB1A23A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME 13 CONCENTRIC REDUCER CB1A23A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME ECP-VST-G-GEN-FT-001 255/761 PIPING CLASS CLASS: CB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 14 CONCENTRIC REDUCER CB1A23A-01 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ECCENTRIC REDUCER CB1A23A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME 16 ECCENTRIC REDUCER CB1A23A-01 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 REDUCER INSERT CB1A23A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 18 CAP CB1A23A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 19 CAP CB1A23A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET G S S S 16 11WELDING ENDS AS PER ASME B16.11 20 CAP CB1A23A-01 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 STRAIGHT AND REDUCER TEE CB1A23A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 STRAIGHT AND REDUCER TEE CB1A23A-01 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 256/761 PIPING CLASS CLASS: CB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 23 OLET CB1A23A-01 1/2 2 3000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 24 OLET CB1A23A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET CB1A23A-01 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG CB1A23A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING CB1A23A-01 1/2 2 3000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING CB1A23A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING CB1A23A-01 1/2 2 3000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 30 HALF COUPLING CB1A23A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 257/761 PIPING CLASS CLASS: CB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 31 NIPPLE CB1A23A-01 1/2 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 32 NIPPLE CB1A23A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 33 FLANGE CB1A23A-01 1/2 2 150 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 34 FLANGE CB1A23A-01 3 6 150 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 35 BLIND FLANGE CB1A23A-01 1/2 6 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK G O C ) S 182 G 36 ORIFICE FLANGE CB1A23A-01 1 1/2 2 300 RF 80S FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. ECP-VST-G-GEN-FT-001 258/761 PIPING CLASS CLASS: CB1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 37 ORIFICE FLANGE CB1A23A-01 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 38 FIGURE 8 CB1A23A-01 1/2 6 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 39 DRIP RINGS CB1A23A-01 2 6 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 40 GASKET CB1A23A-01 1/2 6 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS THICKNESS 1/8" INCHES AISICENTERING RINGS, THICKNESS 1/8 INCHES, AISI 316L SS, DIMENSIONS AS PER ASME B16.20, 41 BOLTING CB1A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 259/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T S 8 W R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CB1A23A-01 ECP-VST-G-GEN-FT-001 260/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 230 ASTM A-182 GR. F316L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 230 SOUR WATER SWI 150 212 HEAVY OIL OIL 200 195 LIGHT GASOIL LGO 300 175 400 160 500 145 600 140 650 125 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS CB1A33A-01 ANSI RATING 700 110 750 95 800 80 850 65 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 261/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CB1A33A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CB1A33A-01 3 6 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598 TRIM TYPE 316L AISI 316L SPIRAL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE ECP-VST-G-GEN-FT-001 262/761 PIPING CLASS CLASS: CB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 3 CHECK VALVE CB1A33A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, . 4 CHECK VALVE CB1A33A-01 3 6 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16 11 CONSTRUCTION AS PER ASME B16 34 5 GLOBE VALVE CB1A33A-01 1/2 2 800 SW B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 263/761 PIPING CLASS CLASS: CB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 6 GLOBE VALVE CB1A33A-01 3 6 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, 7 PIPE CB1A33A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312GR. TP316L, DIMENSIONS AS PER ASME B36.19, 8 PIPE CB1A33A-01 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 9 ELBOW 45 DEGREES CB1A33A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 10 ELBOW 45 DEGREES CB1A33A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME 11 ELBOW 90 DEGREES CB1A33A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16 11SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 90 DEGREES CB1A33A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 CONCENTRIC REDUCER CB1A33A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 264/761 PIPING CLASS CLASS: CB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 14 CONCENTRIC REDUCER CB1A33A-01 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ECCENTRIC REDUCER CB1A33A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 16 ECCENTRIC REDUCER CB1A33A-01 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 REDUCER INSERT CB1A33A-01 1/2 2 6000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 18 CAP CB1A33A-01 1/2 2 6000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 19 CAP CB1A33A-01 1/2 2 6000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11WELDING ENDS AS PER ASME B16.11 20 CAP CB1A33A-01 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 STRAIGHT AND REDUCER TEE CB1A33A-01 1/2 2 6000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 STRAIGHT AND REDUCER TEE CB1A33A-01 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 265/761 PIPING CLASS CLASS: CB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 23 OLET CB1A33A-01 1/2 2 6000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 24 OLET CB1A33A-01 1/2 2 6000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET CB1A33A-01 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG CB1A33A-01 1/2 2 6000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING CB1A33A-01 1/2 2 6000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING CB1A33A-01 1/2 2 6000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING CB1A33A-01 1/2 2 6000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 30 HALF COUPLING CB1A33A-01 1/2 2 6000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 266/761 PIPING CLASS CLASS: CB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 31 NIPPLE CB1A33A-01 1/2 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 32 NIPPLE CB1A33A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 33 FLANGE CB1A33A-01 1/2 2 150 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 34 FLANGE CB1A33A-01 3 6 150 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 35 BLIND FLANGE CB1A33A-01 1/2 6 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 36 ORIFICE FLANGE CB1A33A-01 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L DIMENSIONS AS PER ASME B16 3636 ORIFICE FLANGE CB1A33A 01 1 1/2 2 300 RF 80S F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ECP-VST-G-GEN-FT-001 267/761 PIPING CLASS CLASS: CB1A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 37 ORIFICE FLANGE CB1A33A-01 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 38 FIGURE 8 CB1A33A-01 1/2 6 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 39 DRIP RINGS CB1A33A-01 2 6 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 40 GASKET CB1A33A-01 1/2 6 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316L SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 41 BOLTING CB1A33A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 268/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CB1A33A-01 ECP-VST-G-GEN-FT-001 269/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 600 ASTM A-182 GR. F316L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 600 CHEMICALS QUI 150 602 GLYCOL GLY 200 605 LIGHT GASOIL LGO 300 455 400 415 500 380 600 360 650 350 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS CB2A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 700 345 750 335 800 330 850 320 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 270/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CB2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CB2A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CB2A23A-01 3 6 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3M (AISI 316L), ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 CHECK VALVE CB2A23A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 3 C C C 3 0 / 800 S G S S S 6 , CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, . 4 CHECK VALVE CB2A23A-01 3 6 300 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . ECP-VST-G-GEN-FT-001 271/761 PIPING CLASS CLASS: CB2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 5 GLOBE VALVE CB2A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 6 GLOBE VALVE CB2A23A-01 3 6 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 PIPE CB2A23A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312GR. TP316L, DIMENSIONS AS PER ASME B36.19, 8 PIPE CB2A23A-01 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 9 ELBOW 45 DEGREES CB2A23A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 10 ELBOW 45 DEGREES CB2A23A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 90 DEGREES CB2A23A 01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME11 ELBOW 90 DEGREES CB2A23A-01 1/2 2 6000 SW 182 GR. F316L, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 90 DEGREES CB2A23A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 272/761 PIPING CLASS CLASS: CB2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 13 CONCENTRIC REDUCER CB2A23A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP- 95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 14 CONCENTRIC REDUCER CB2A23A-01 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ECCENTRIC REDUCER CB2A23A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP- 95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 ECCENTRIC REDUCER CB2A23A-01 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 REDUCER INSERT CB2A23A-01 1/2 2 6000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 18 CAP CB2A23A-01 1/2 2 6000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 19 CAP CB2A23A-01 1/2 2 6000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP CB2A23A-01 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 STRAIGHT AND REDUCER TEE CB2A23A-01 1/2 2 6000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11ASME B16.11 22 STRAIGHT AND REDUCER TEE CB2A23A-01 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 OLET CB2A23A-01 1/2 2 6000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 273/761 PIPING CLASS CLASS: CB2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 24 OLET CB2A23A-01 1/2 2 6000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET CB2A23A-01 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG CB2A23A-01 1/2 2 6000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING CB2A23A-01 1/2 2 6000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING CB2A23A-01 1/2 2 6000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING CB2A23A-01 1/2 2 6000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 30 HALF COUPLING CB2A23A-01 1/2 2 6000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 31 NIPPLE CB2A23A-01 1/2 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 32 NIPPLE CB2A23A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 33 FLANGE CB2A23A-01 1/2 2 300 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 274/761 PIPING CLASS CLASS: CB2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 34 FLANGE CB2A23A-01 3 6 300 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 35 BLIND FLANGE CB2A23A-01 1/2 6 300 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 36 ORIFICE FLANGE CB2A23A-01 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 37 ORIFICE FLANGE CB2A23A-01 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 38 FIGURE 8 CB2A23A-01 1/2 6 300 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 39 DRIP RINGS CB2A23A-01 2 6 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND 40 GASKET CB2A23A-01 1/2 6 300 RF WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316L SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 41 BOLTING CB2A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 275/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CB2A23A-01 ECP-VST-G-GEN-FT-001 276/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 600 ASTM A-182 GR. F316L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 600 CYCLOHEXANE CIC 150 602 HEAVY OIL OIL 200 605 LIGHT GASOIL LGO 300 455 400 415 500 380 600 360 650 350 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/8" FLANGE FINISH DATE: 5-oct-04 RF PIPING CLASS CB2A33A-01 ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 700 345 750 335 800 330 850 320 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 277/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CB2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CB2A33A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CB2A33A-01 3 6 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 CHECK VALVE CB2A33A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, . ECP-VST-G-GEN-FT-001 278/761 PIPING CLASS CLASS: CB2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 4 CHECK VALVE CB2A33A-01 3 6 300 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 5 GLOBE VALVE CB2A33A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, 6 GLOBE VALVE CB2A33A-01 3 6 300 RF AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 PIPE CB2A33A-01 1/2 3/4 PE 160S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L,DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 8 PIPE CB2A33A-01 1 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L,DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 9 PIPE CB2A33A-01 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. T316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 279/761 PIPING CLASS CLASS: CB2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 10 ELBOW 45 DEGREES CB2A33A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 11 ELBOW 45 DEGREES CB2A33A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 90 DEGREES CB2A33A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 90 DEGREES CB2A33A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 CONCENTRIC REDUCER CB2A33A-01 1/2 3/4 160S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 15 CONCENTRIC REDUCER CB2A33A-01 1 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. 16 CONCENTRIC REDUCER CB2A33A-01 3 6 BW 40S WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER CB2A33A-01 1/2 3/4 160S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER CB2A33A-01 1 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 19 ECCENTRIC REDUCER CB2A33A-01 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 REDUCER INSERT CB2A33A-01 1/2 2 6000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 280/761 PIPING CLASS CLASS: CB2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 21 CAP CB2A33A-01 1/2 2 6000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 22 CAP CB2A33A-01 1/2 2 6000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 CAP CB2A33A-01 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 STRAIGHT AND REDUCER TEE CB2A33A-01 1/2 2 6000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 25 STRAIGHT AND REDUCER TEE CB2A33A-01 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 26 OLET CB2A33A-01 1/2 2 6000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 OLET CB2A33A-01 1/2 2 6000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 28 OLET CB2A33A-01 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 29 PLUG CB2A33A-01 1/2 2 6000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 30 COUPLING CB2A33A-01 1/2 2 6000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 31 COUPLING CB2A33A-01 1/2 2 6000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 32 HALF COUPLING CB2A33A-01 1/2 2 6000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 281/761 PIPING CLASS CLASS: CB2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 33 HALF COUPLING CB2A33A-01 1/2 2 6000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 34 NIPPLE CB2A33A-01 1/2 3/4 THD 160S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 NIPPLE CB2A33A-01 1 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 36 NIPPLE CB2A33A-01 1/2 3/4 PE 160S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR.TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 37 NIPPLE CB2A33A-01 1 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR.TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 38 FLANGE CB2A33A-01 1/2 3/4 300 RF 160S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 39 FLANGE CB2A33A-01 1 2 300 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 40 FLANGE CB2A33A-01 3 6 300 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 41 BLIND FLANGE CB2A33A-01 1/2 6 300 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 42 ORIFICE FLANGE CB2A33A-01 1/2 3/4 300 RF 160S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. ECP-VST-G-GEN-FT-001 282/761 PIPING CLASS CLASS: CB2A33A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 43 ORIFICE FLANGE CB2A33A-01 1 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 44 ORIFICE FLANGE CB2A33A-01 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 45 FIGURE 8 CB2A33A-01 1/2 12 300 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 316L,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 46 DRIP RINGS CB2A33A-01 2 6 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE 47 GASKET CB2A33A-01 1/2 6 300 RF FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316L SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 48 BOLTING CB2A33A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B8M / ASTM A 194 GR. B8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 283/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CB2A33A-01 ECP-VST-G-GEN-FT-001 284/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAIINLESS STEEL To: 275 ASTM A-182 GR. F304 DESIGN TEMPERATURE (°F): From: -300 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -300 to 100 275 BUTHANE BUT 150 252 CHEMICALS QUI 200 230 ETHYLENE ETI 300 205 HEAVY FUEL OIL HFO 400 190 HEAVY GASOIL HGO 500 170 HYDRAZINE HYM 600 140 LIGHT NAPHTHA LGA 650 125 LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS CC1A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 700 110 LUBE OIL ACI 750 95 METHANOL MEL 800 80 PEROXIDE LLPE 850 65 SEAL OIL SEO 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.1 2.-FOR ETHYLENE SERVICE, THE VALVES SHOULD HAVE AN EXTENDED BONNET 3,-CRYOGENIC SERVICE IS -300ºF TO 250ºF AND 275 PSIG MAXIMUM 150 300 600 900 1500 -20 to 100 275 720 1440 2160 3600 150 252 660 1320 1980 3300 200 230 600 1200 1800 3000 300 205 540 1080 1620 2700 400 190 495 995 1490 2485 500 170 465 930 1395 2330 600 140 435 875 1310 2185 650 125 430 860 1290 2150 700 110 425 850 1275 2125 750 95 415 830 1245 2075 800 80 405 805 1210 2015 850 65 395 790 1190 1980 900 50 390 780 1165 1945 950 35 380 765 1145 1910 1000 20 320 640 965 1605 1050 ,,, 310 615 925 1545 1100 ,,, 255 515 770 1285 1150 ,,, 200 400 595 995 1200 ,,, 155 310 465 770 ECP-VST-G-GEN-FT-001 285/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CC1A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F304, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL STAINLESS STEEL, GATE VALVE, ASTM A-351 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 2 GATE VALVE CC1A23A-01 3 8 150 RF GR. CF8, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 286/761 PIPING CLASS CLASS: CC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 3 GATE VALVE CC1A23A-01 10 24 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE CC1A23A-01 1/2 2 800 SW STAINLESS STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLERWOUND BONNET GASKET GRAPHITE FILLER, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE CC1A23A-01 3 24 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . ECP-VST-G-GEN-FT-001 287/761 PIPING CLASS CLASS: CC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 6 GLOBE VALVE CC1A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE CC1A23A-01 3 8 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS GRAPHITESTELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE CC1A23A-01 10 12 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR ECP-VST-G-GEN-FT-001 288/761 PIPING CLASS CLASS: CC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 9 PIPE CC1A23A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304, DIMENSIONS AS PER ASME 10 PIPE CC1A23A-01 3 12 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A- 312 GR. TP304, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 11 PIPE CC1A23A-01 14 24 BE 20 (B36.10) STAINLESS STEEL, SEAMLESS PIPE, ASTM A- 312 GR. TP304, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES CC1A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 13 ELBOW 45 DEGREES CC1A23A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 14 ELBOW 45 DEGREES CC1A23A-01 14 24 BW 20 (B36.10) STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 15 ELBOW 90 DEGREES CC1A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME STAINLESS STEEL, ELBOW 90 DEGREES, LONG 16 ELBOW 90 DEGREES CC1A23A-01 3 12 BW 40S RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 17 ELBOW 90 DEGREES CC1A23A-01 14 24 BW 20 (B36.10) STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 18 CONCENTRIC REDUCER CC1A23A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP304, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS 19 CONCENTRIC REDUCER CC1A23A-01 3 12 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME 20 CONCENTRIC REDUCER CC1A23A-01 14 24 BW 20 (B36.10) STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME ECP-VST-G-GEN-FT-001 289/761 PIPING CLASS CLASS: CC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 21 ECCENTRIC REDUCER CC1A23A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP304, DIMENSIONS AS PER MSS- SP-95, PLAIN END, OR BEVELED END AS PER 22 ECCENTRIC REDUCER CC1A23A-01 3 12 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME 23 ECCENTRIC REDUCER CC1A23A-01 14 24 BW 20 (B36.10) STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME 24 CAP CC1A23A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F304,DIMENSIONS AS PER ASME B16.11, FEMALE 25 CAP CC1A23A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F304,DIMENSIONS AS PER ASME B16.11, SOCKET 26 CAP CC1A23A-01 3 12 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR.WP304, DIMENSIONS AS PER ASME B16.9, 27 CAP CC1A23A-01 14 24 BW 20 (B36.10)STAINLESS STEEL, CAP, ASTM A-403 GR.WP304, DIMENSIONS AS PER ASME B16.9, 28 STRAIGHT AND REDUCER TEE CC1A23A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS STAINLESS STEEL, STRAIGHT AND REDUCER 29 STRAIGHT AND REDUCER TEE CC1A23A-01 3 12 BW 40S TEE, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 30 STRAIGHT AND REDUCER TEE CC1A23A-01 14 24 BW 20 (B36.10) STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 31 OLET CC1A23A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182GR. F304, DIMENSIONS AS PER MSS-SP-97, 32 OLET CC1A23A-01 3 12 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182GR. F304, DIMENSIONS AS PER MSS-SP-97, 33 OLET CC1A23A-01 14 24 BW 20 (B36.10)STAINLESS STEEL, WELDOLET, ASTM A-182GR. F304, DIMENSIONS AS PER MSS-SP-97, ECP-VST-G-GEN-FT-001 290/761 PIPING CLASS CLASS: CC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 34 PLUG CC1A23A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER 35 COUPLING CC1A23A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR.F304, DIMENSIONS AS PER ASME B16.11, 36 NIPPLE CC1A23A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE,ASTM A-312 GR. TP304, DIMENSIONS AS PER 37 FLANGE CC1A23A-01 1/2 2 150 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE,ASTM A-182 GR. F304, DIMENSIONS AS PER 38 FLANGE CC1A23A-01 3 12 150 RF 40S STAINLESS STEEL, WELDING NECK FLANGE,ASTM A-182 GR. F304, DIMENSIONS AS PER 39 FLANGE CC1A23A-01 14 24 150 RF 20 (B36.10)STAINLESS STEEL, WELDING NECK FLANGE,ASTM A-182 GR. F304, DIMENSIONS AS PER 40 BLIND FLANGE CC1A23A-01 1 1/2 12 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182GR. F304, DIMENSIONS AS PER ASME B16.5, 41 ORIFICE FLANGE CC1A23A-01 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A- 182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK 42 ORIFICE FLANGE CC1A23A-01 3 12 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A- 182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK ECP-VST-G-GEN-FT-001 291/761 PIPING CLASS CLASS: CC1A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDUL E COMPONENTS DESCRIPTION NOTES 43 ORIFICE FLANGE CC1A23A-01 14 24 300 RF 20 (B36.10) STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A- 182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK 44 FIGURE 8 CC1A23A-01 1/2 12 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 304, DIMENSIONS AS PER ASME B16.5, 45 SPACER RING CC1A23A-01 14 24 150 RF STAINLESS STEEL, SPACER RING, ASTM A-240GR. 304, DIMENSIONS AS PER ASME B16.5, 46 BLIND PLATE CC1A23A-01 14 24 150 RF STAINLESS STEEL, BLIND PLATE, ASTM A-240GR. 304, DIMENSIONS AS PER ASME B16.5, 47 DRIP RINGS CC1A23A-01 2 24 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 304, 48 GASKET CC1A23A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, 49 BOLTING CC1A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL49 BOLTING CC1A23A-01 NUTS, ASTM A-193 GR. B8 CL 2 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER NOTES: ECP-VST-G-GEN-FT-001 292/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CC1A23A-01 ECP-VST-G-GEN-FT-001 293/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAIINLESS STEEL To: 720 ASTM A-182 GR. F304 DESIGN TEMPERATURE (°F): From: -300 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -300 to 100 720 BUTHANE BUT 150 660 CHEMICALS QUI 200 600 ETHYLENE ETI 300 540 FLUE GAS FLU 400 495 HEAVY GASOIL HGO 500 465 HYDRAZINE HYM 600 435 LIGHT NAPHTHA LGA 650 430 LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG 700 425 METHANOL MEL 750 415 PEROXIDE LLPE 800 405 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS CC2A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 850 395 900 390 950 380 1000 320 1050 310 1100 255 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.1 2.-FOR ETHYLENE SERVICE, THE VALVES SHOULD HAVE AN EXTENDED BONNET 3,-CRIOGENE SERVICE IS -300ºF TO 250ºF AND 275 PSIG MAXIMUM 150 300 600 900 1500 -20 to 100 275 720 1440 2160 3600 150 252 660 1320 1980 3300 200 230 600 1200 1800 3000 300 205 540 1080 1620 2700 400 190 495 995 1490 2485 500 170 465 930 1395 2330 600 140 435 875 1310 2185 650 125 430 860 1290 2150 700 110 425 850 1275 2125 750 95 415 830 1245 2075 800 80 405 805 1210 2015 850 65 395 790 1190 1980 900 50 390 780 1165 1945 950 35 380 765 1145 1910 1000 20 320 640 965 1605 1050 ,,, 310 615 925 1545 1100 ,,, 255 515 770 1285 1150 ,,, 200 400 595 995 1200 ,,, 155 310 465 770 ECP-VST-G-GEN-FT-001 294/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CC2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CC2A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F304, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CC2A23A-01 3 8 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE CC2A23A-01 10 24 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE CC2A23A-01 1/2 2 800 SW STAINLESS STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE CC2A23A-01 3 24 300 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE CC2A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE CC2A23A-01 3 8 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 GLOBE VALVE CC2A23A-01 10 12 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 9 PIPE CC2A23A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304, DIMENSIONS ASPER ASME B36.19, PLAIN ENDS 10 PIPE CC2A23A-01 3 12 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304, DIMENSIONS ASPER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 11 PIPE CC2A23A-01 14 24 BE 40 (B36.10) STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304, DIMENSIONS ASPER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES CC2A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F304, DIMENSIONSAS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES CC2A23A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 295/761 PIPING CLASS CLASS: CC2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 14 ELBOW 45 DEGREES CC2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 90 DEGREES CC2A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F304, DIMENSIONSAS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 90 DEGREES CC2A23A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES CC2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 CONCENTRIC REDUCER CC2A23A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP304, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 19 CONCENTRIC REDUCER CC2A23A-01 3 12 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER CC2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER CC2A23A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP304, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER CC2A23A-01 3 12 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER CC2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 CAP CC2A23A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F304, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 25 CAP CC2A23A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F304, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 26 CAP CC2A23A-01 3 12 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25, 27 CAP CC2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, CAP, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASMEB16.9, BEVELED ENDS AS PER ASME B16.25 28 STRAIGHT AND REDUCER TEE CC2A23A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 STRAIGHT AND REDUCER TEE CC2A23A-01 3 12 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE CC2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 OLET CC2A23A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F304, DIMENSIONS AS PERMSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 32 OLET CC2A23A-01 3 12 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F304, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 33 OLET CC2A23A-01 14 24 BW 40 (B36.10) STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F304, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 34 PLUG CC2A23A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 COUPLING CC2A23A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 36 NIPPLE CC2A23A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304,DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 37 FLANGE CC2A23A-01 1/2 2 300 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F304,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 38 FLANGE CC2A23A-01 3 12 300 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 39 FLANGE CC2A23A-01 14 24 300 RF 40 (B36.10) STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 40 BLIND FLANGE CC2A23A-01 1 1/2 12 300 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F304, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END 41 ORIFICE FLANGE CC2A23A-01 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304 ECP-VST-G-GEN-FT-001 296/761 PIPING CLASS CLASS: CC2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 42 ORIFICE FLANGE CC2A23A-01 3 12 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304 43 ORIFICE FLANGE CC2A23A-01 14 24 300 RF 40 (B36.10) STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304 44 FIGURE 8 CC2A23A-01 1/2 12 300 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 304, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 45 SPACER RING CC2A23A-01 14 24 300 RF STAINLESS STEEL, SPACER RING, ASTM A-240 GR. 304, DIMENSIONS AS PERASME B16.5, RAISED FACE ENDS 46 BLIND PLATE CC2A23A-01 14 24 300 RF STAINLESS STEEL, BLIND PLATE, ASTM A-240 GR. 304, DIMENSIONS AS PERASME B16.5, RAISED FACE ENDS 47 DRIP RINGS CC2A23A-01 2 24 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 304, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 48 GASKET CC2A23A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 49 BOLTING CC2A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B8 CL. 2 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 297/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T W R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CC2A23A-01 ECP-VST-G-GEN-FT-001 298/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAIINLESS STEEL To: 1440 ASTM A-182 GR. F304 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1440 PEROXIDE LLPE 150 1320 200 1200 300 1080 400 995 500 930 600 875 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS CC3A23A-01 ANSI RATING 650 860 700 850 750 830 800 805 850 790 900 780 950 765 1000 640 1050 615 1100 515 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.1 150 300 600 900 1500 -20 to 100 275 720 1440 2160 3600 150 252 660 1320 1980 3300 200 230 600 1200 1800 3000 300 205 540 1080 1620 2700 400 190 495 995 1490 2485 500 170 465 930 1395 2330 600 140 435 875 1310 2185 650 125 430 860 1290 2150 700 110 425 850 1275 2125 750 95 415 830 1245 2075 800 80 405 805 1210 2015 850 65 395 790 1190 1980 900 50 390 780 1165 1945 950 35 380 765 1145 1910 1000 20 320 640 965 1605 1050 ,,, 310 615 925 1545 1100 ,,, 255 515 770 1285 1150 ,,, 200 400 595 995 1200 ,,, 155 310 465 770 ECP-VST-G-GEN-FT-001 299/761 Elaborado 25/03/2011 Versión 1 PIPING CLASS CLASS: CC3A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CC3A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F304, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CC3A23A-01 3 8 600 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE CC3A23A-01 10 24 600 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE CC3A23A-01 1/2 2 800 SW STAINLESS STEEL, PISTON CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED COVER, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE CC3A23A-01 3 24 600 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE CC3A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 O , OU S SC O , S SC UG , S INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE CC3A23A-01 3 8 600 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM AISI 304, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 PIPE CC3A23A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304, DIMENSIONSAS PER ASME B36.19, PLAIN ENDS 9 PIPE CC3A23A-01 3 10 BE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304, DIMENSIONSAS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 10 PIPE CC3A23A-01 12 24 BE 80 (B36.10) STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304, DIMENSIONSAS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES CC3A23A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES CC3A23A-01 3 10 BW 80S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 45 DEGREES CC3A23A-01 12 24 BW 80 (B36.10) STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 90 DEGREES CC3A23A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 15 ELBOW 90 DEGREES CC3A23A-01 3 10 BW 80S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 90 DEGREES CC3A23A-01 12 24 BW 80 (B36.10) STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 CONCENTRIC REDUCER CC3A23A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP304, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 18 CONCENTRIC REDUCER CC3A23A-01 3 10 BW 80S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CONCENTRIC REDUCER CC3A23A-01 12 24 BW 80 (B36.10) STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 ECCENTRIC REDUCER CC3A23A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP304, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR BEVELED END AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 300/761 PIPING CLASS CLASS: CC3A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 21 ECCENTRIC REDUCER CC3A23A-01 3 10 BW 80S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 ECCENTRIC REDUCER CC3A23A-01 12 24 BW 80 (B36.10) STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 CAP CC3A23A-01 1/2 2 6000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F304, DIMENSIONS AS PER ASMEB16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 24 CAP CC3A23A-01 1/2 2 6000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F304, DIMENSIONS AS PER ASMEB16.11, SOCKET WELDING ENDS AS PER ASME B16.11 25 CAP CC3A23A-01 3 10 BW 80S STAINLESS STEEL, CAP, ASTM A-403 GR. WP304, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 26 CAP CC3A23A-01 12 24 BW 80 (B36.10) STAINLESS STEEL, CAP, ASTM A-403 GR. WP304, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 STRAIGHT AND REDUCER TEE CC3A23A-01 1/2 2 6000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 STRAIGHT AND REDUCER TEE CC3A23A-01 3 10 BW 80S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 STRAIGHT AND REDUCER TEE CC3A23A-01 12 24 BW 80 (B36.10) STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 OLET CC3A23A-01 1/2 2 6000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F304, DIMENSIONS AS PERMSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 31 OLET CC3A23A-01 3 10 BW 80S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F304, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 32 OLET CC3A23A-01 12 24 BW 80 (B36.10) STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F304, DIMENSIONS AS PERMSS-SP-97, BEVELED ENDS AS PER ASME B16.25 33 PLUG CC3A23A-01 1/2 2 6000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 34 COUPLING CC3A23A-01 1/2 2 6000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304, DIMENSIONS AS PERASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 35 NIPPLE CC3A23A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304,DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 36 FLANGE CC3A23A-01 1/2 2 600 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F304,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 37 FLANGE CC3A23A-01 3 10 600 RF 80S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 38 FLANGE CC3A23A-01 12 24 600 RF 80 (B36.10) STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304,DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 39 BLIND FLANGE CC3A23A-01 1 1/2 12 600 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F304, DIMENSIONS ASPER ASME B16.5, RAISED FACE FLANGED END 40 ORIFICE FLANGE CC3A23A-01 1 1/2 2 600 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16 36 COMPLETE WITH SPACING JACK SCREWS BOLTS ASTM A-ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A 193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304 41 ORIFICE FLANGE CC3A23A-01 3 10 600 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304 42 ORIFICE FLANGE CC3A23A-01 12 24 600 RF 80 (B36.10) STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B8 CL. 2, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F304 43 FIGURE 8 CC3A23A-01 1/2 12 600 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 304, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 44 SPACER RING CC3A23A-01 14 24 600 RF STAINLESS STEEL, SPACER RING, ASTM A-240 GR. 304, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 45 BLIND PLATE CC3A23A-01 14 24 600 RF STAINLESS STEEL, BLIND PLATE, ASTM A-240 GR. 304, DIMENSIONS ASPER ASME B16.5, RAISED FACE ENDS 46 DRIP RINGS CC3A23A-01 2 24 600 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 304, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 47 GASKET CC3A23A-01 1/2 24 600 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 48 BOLTING CC3A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B8 CL. 2 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 301/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T W R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CC3A23A-01 ECP-VST-G-GEN-FT-001 302/761 Elaborado 25/03/2011 CLASS 20000 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAIINLESS STEEL To: 20000 SS 304 DESIGN TEMPERATURE (°F): From: -300 To: 600 DESIGN LIMITS Class Temperature 20000 SERVICE REFERENCE NOTES (°F) (PSIG) -300 to 100 30023 ETHYLENE GAS + POLYETHYLENE LPE 200 30023 ETHYLENE GAS ETI 5-oct-04 N/A PIPING CLASS CC83A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador N/A FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 200 30023 ETHYLENE GAS ETI 400 28863 PEROXIDE LLPE 600 27413 800 25382 NOTES: 1.- DESIGN PRESSURES ACCORDING WITH MANUFACTURERS INFORMATION (Autoclave) ECP-VST-G-GEN-FT-001 303/761 PIPING CLASS CLASS: CC83A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 NEEDLE VALVE, TWO WAY VALVE CC83A-01 -- 2 20000 OD STAINLESS STEEL, TWO WAY STRAIGHT THROUGH STOP VALVE, WITH GLANDS, SS 316, 20 000 PSIG SERVICE. MEDIUM PRESSURE TUBING, TRIM SS 316, STEM SS 316, GRAPHITE STEM PACKING , HANDLE 2 NEEDLE VALVE, THREE WAY VALVE CC83A-01 -- 2 20000 OD STAINLESS STEEL, THREE WAY, TWO STEM STOP VALVE, WITH GLANDS, SS 316, 20 000 PSIG SERVICE. MEDIUM PRESSURE TUBING, TRIM SS 316, STEM SS 316, GRAPHITE STEM PACKING , HANDLE 2 NEEDLE VALVE, TWO WAY ANGLE VALVE CC83A-01 -- 2 20000 OD STAINLESS STEEL, TWO WAY ANGLE VALVE, WITH GLANDS, SS 316, 20 000 PSIG SERVICE. MEDIUM PRESSURE TUBING, TRIM SS 316, STEM SS 316, GRAPHITE STEM PACKING , HANDLE 3 BALL CHECK VALVE CC83A-01 -- 2 20000 OD STAINLESS STEEL, BALL CHECK VALVE, WITH GLANDS, SS 316, 20 000 PSIG SERVICE. MEDIUM PRESSURE TUBING, TRIM SS 316, 316 SS BALL, 3 ANGLE BALL CHECK VALVE CC83A-01 -- 2 20000 OD STAINLESS STEEL, ANGLE BALL CHECK VALVE, WITH GLANDS, SS 316, 20 000 PSIG SERVICE. MEDIUM PRESSURE TUBING, TRIM SS 316, 316 SS 4 PIPE CC83A-01 -- 2 20000 PE 0,5 in STAINLESS STEEL, SEAMLESS TUBING (I.D. = 1,0 in), SS 304, PLAIN ENDS, 20000 PSIG SERVICE. MEDIUM PRESSURE TUBING 4 ELBOW 45 DEGREES (BEND) CC83A-01 -- 2 STAINLESS STEEL, ELBOW 45 DEGREES, BEND 1'- 6" RADIUS FROM SEAMLESS TUBING, WITH 8" MIN. TANGENT ONE END, 1'-3" MIN. TANGENT OTHER 5 ELBOW 90 DEGREES (BEND) CC83A-01 -- 2 STAINLESS STEEL, ELBOW 90 DEGREES, BEND 1'- 6" RADIUS FROM SEAMLESS TUBING, WITH 8" MIN. TANGENT ONE END, 1'-3" MIN. TANGENT OTHER 5 ELBOW 45 DEGREES(BLOCK TYPE) CC83A-01 -- 2 20000 OD STAINLESS STEEL, ELBOW 45 DEGREES SPECIAL BLOCK TYPE, TWO WAYS WITH GLANDS, SS 304, 20 000 Lb. MEDIUM PRESSURE STAINLESS STEEL ELBOW 90 DEGREES SPECIAL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 6 ELBOW 90 DEGREES(BLOCK TYPE) CC83A-01 -- 2 20000 OD STAINLESS STEEL, ELBOW 90 DEGREES SPECIAL BLOCK TYPE, TWO WAYS WITH GLANDS, SS 304, 20 000 Lb. MEDIUM PRESSURE 6 TEE(BLOCK TYPE) CC83A-01 -- 2 20000 OD STAINLESS STEEL, TEE SPECIAL BLOCK TYPE, THREE WAYS WITH GLANDS, SS 304, 20 000 Lb. MEDIUM PRESSURE 7 CROSS(BLOCK TYPE) CC83A-01 -- 2 20000 OD STAINLESS STEEL, CROSS SPECIAL BLOCK TYPE. FOUR WAYS WITH GLANDS, SS 304, 20 000 Lb. MEDIUM PRESSURE 7 STRAIGHT COUPLING / UNION COUPLING CC83A-01 -- 2 20000 OD STAINLESS STEEL, STRAIGHT COUPLING / UNION COUPLING, WITH GLANDS, SS 304, 20 000 Lb. MEDIUM PRESSURE 8 BULKHEAD COUPLING CC83A-01 -- 2 20000 OD STAINLESS STEEL, BULKHEAD COUPLING, WITHGLANDS, SS 304, 20 000 Lb. MEDIUM PRESSURE NOTES: ECP-VST-G-GEN-FT-001 304/761 B 24 R 20 A 18 N 16 C 14 H 12 10 S 8 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES Versión 1 I 6 Z 4 E 3 2 T 1½ T 1 T 3/4 T 9/16 T 1/2 T 3/8 T 1/4 T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ 9/16 1/2 3/8 1/4 H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CC83A-01 N/A ECP-VST-G-GEN-FT-001 305/761 Elaborado 25/03/2011 CLASS 60000 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAIINLESS STEEL To: 60000 SS 304 AND ALLOY STEEL AISI E-4340 (ASTM A-519 E-4340) DESIGN TEMPERATURE (°F): From: -20 To: 600 DESIGN LIMITS Class Temperature 60000 SERVICE REFERENCE NOTES (°F) (PSIG) -20 to 100 60000 ETHYLENE GAS + POLYETHYLENE LPE 5-oct-04 N/A PIPING CLASS CC93A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador N/A FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 200 56556 ETHYLENE GAS ETI 400 51634 PEROXIDE LLPE 600 50764 NOTES: 1.- DESIGN PRESSURES ACCORDING WITH MANUFACTURERS INFORMATION (Autoclave) 2.- WELDING ON PIPING INCLUDED IN THIS SPECIFICATION IS PROHIBITED. 3.- EXTERNAL FLANGE THREADS ON 2 5/8" OD TUBING MAY BE LUBRICATED WITH FEL PRO C-5A (COPPER BASED ANTI-SEIZE LUBRICANT) OR EQUIVALENT. 4.- THE ABOVE SPECIFICATIONS ARE TO BE USED FOR INSTRUMENTATION WHERE APPLICABLE. ECP-VST-G-GEN-FT-001 306/761 PIPING CLASS CLASS: CC93A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 NEEDLE VALVE, TWO WAY VALVE CC93A-01 1/4 2 60 000 OD STAINLESS STEEL, TWO WAY STRAIGHT THROUGH STOP VALVE, WITH GLANDS, SS 316, 60 000 PSIG SERVICE. HIGH PRESSURE TUBING, TRIM SS 316, STEM SS 316, GRAPHITE STEM PACKING , HANDLE 2 NEEDLE VALVE, THREE WAY VALV CC93A-01 1/4 2 60 000 OD STAINLESS STEEL, THREE WAY, TWO STEM STOP VALVE, WITH GLANDS, SS 316, 60 000 PSIG SERVICE. HIGH PRESSURE TUBING, TRIM SS 316, STEM SS 316, GRAPHITE STEM PACKING , HANDLE 3 NEEDLE VALVE, TWO WAY ANGLE CC93A-01 1/4 2 60 000 OD STAINLESS STEEL, TWO WAY ANGLE VALVE, WITH GLANDS, SS 316, 60 000 PSIG SERVICE. HIGH PRESSURE TUBING, TRIM SS 316, STEM SS 316, GRAPHITE STEM PACKING , HANDLE 4 BALL CHECK VALVE CC93A-01 1/4 2 60 000 OD STAINLESS STEEL, BALL CHECK VALVE, WITH GLANDS, SS 316, 60 000 PSIG SERVICE. HIGH PRESSURE TUBING, TRIM SS 316, 316 SS BALL, 5 ANGLE BALL CHECK VALVE CC93A-01 1/4 2 60 000 OD STAINLESS STEEL, ANGLE BALL CHECK VALVE, WITH GLANDS, SS 316, 60 000 PSIG SERVICE. HIGH PRESSURE TUBING, TRIM SS 316, 316 SS BALL, 6 PIPE CC93A-01 1/4 -- 60 000 PE 0.083" STAINLESS STEEL, SEAMLESS TUBING (1/4" OD x 0,083" ID), SS 304, PLAIN ENDS, 60000 PSIG SERVICE. HIGH PRESSURE TUBING PIPE TYPE 1 7 PIPE CC93A-01 3/8 -- 60 000 PE 0.125" STAINLESS STEEL, SEAMLESS TUBING (3/8" OD x 1/8" ID), SS 304, PLAIN ENDS, 60000 PSIG SERVICE. HIGH PRESSURE TUBING PIPE TYPE 1 8 PIPE CC93A-01 9/16 -- 60 000 PE 0.187" STAINLESS STEEL, SEAMLESS TUBING (9/16" OD x 3/16" ID), SS 304, PLAIN ENDS, 60000 PSIG SERVICE. HIGH PRESSURE TUBING PIPE TYPE 1 9 PIPE CC93A-01 -- 2 52 000 PE 0.875" ALLOY STEEL, SEAMLESS TUBING (2 5/8" OD x 7/8" ID), AISI E4340, PLAIN ENDS, 50764 PSIG SERVICE. HIGH PRESSURE TUBING PIPE TYPE 2 10 ELBOW 45 DEGREES (BEND) CC93A-01 1/4 0.083" STAINLESS STEEL, ELBOW 45 DEGREES, BEND WITH MINIMUM 6" RADIUS MAY BE USED IN PLACE OF ELBOWS, SS 316, 60 000 Lb. HIGH PRESSURE PIPE TYPE 1 STAINLESS STEEL, ELBOW 45 DEGREES, BEND WITH PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 11 ELBOW 45 DEGREES (BEND) CC93A-01 3/8 0.125" MINIMUM 6" RADIUS MAY BE USED IN PLACE OF ELBOWS, SS 316, 60 000 Lb. HIGH PRESSURE PIPE TYPE 1 12 ELBOW 45 DEGREES (BEND) CC93A-01 9/16 0.187" STAINLESS STEEL, ELBOW 45 DEGREES, BEND WITH MINIMUM 6" RADIUS MAY BE USED IN PLACE OF ELBOWS, SS 316, 60 000 Lb. HIGH PRESSURE PIPE TYPE 1 13 ELBOW 90 DEGREES (BEND) CC93A-01 1/4 0.083" STAINLESS STEEL, ELBOW 90 DEGREES, BEND WITH MINIMUM 6" RADIUS MAY BE USED IN PLACE OF ELBOWS, SS 316, 60 000 Lb. HIGH PRESSURE PIPE TYPE 1 14 ELBOW 90 DEGREES (BEND) CC93A-01 3/8 0.125" STAINLESS STEEL, ELBOW 90 DEGREES, BEND WITH MINIMUM 6" RADIUS MAY BE USED IN PLACE OF ELBOWS, SS 316, 60 000 Lb. HIGH PRESSURE PIPE TYPE 1 15 ELBOW 90 DEGREES (BEND) CC93A-01 9/16 0.187" STAINLESS STEEL, ELBOW 90 DEGREES, BEND WITH MINIMUM 6" RADIUS MAY BE USED IN PLACE OF ELBOWS, SS 316, 60 000 Lb. HIGH PRESSURE PIPE TYPE 1 16 ELBOW 45 DEGREES (BEND) CC93A-01 -- 2 0.875" ALLOY STEEL, ELBOW 45 DEGREES, BEND 2'-3" RADIUS FROM SEAMLESS TUBING, WITH 9" MIN. TANGENT ONE END, 1'-3" MIN. TANGENT OTHER END., AISI E4340, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 2 17 ELBOW 90 DEGREES (BEND) CC93A-01 -- 2 0.875" ALLOY STEEL, ELBOW 90 DEGREES, BEND 2'-3" RADIUS FROM SEAMLESS TUBING, WITH 9" MIN. TANGENT ONE END, 1'-3" MIN. TANGENT OTHER END., AISI E4340, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 2 18 ELBOW 45 DEGREES�(BLOCK TYP CC93A-01 1/4 9/16 60 000 OD STAINLESS STEEL, ELBOW 45 DEGREES SPECIAL BLOCK TYPE, TWO WAYS WITH GLANDS, SS 316, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 1 19 ELBOW 90 DEGREES�(BLOCK TYP CC93A-01 1/4 9/16 60 000 OD STAINLESS STEEL, ELBOW 90 DEGREES SPECIAL BLOCK TYPE, TWO WAYS WITH GLANDS, SS 316, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 1 20 TEE�(BLOCK TYPE) CC93A-01 1/4 9/16 60 000 OD STAINLESS STEEL, TEE SPECIAL BLOCK TYPE, THREEWAYS WITH GLANDS, SS 316, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 1 21 CROSS�(BLOCK TYPE) CC93A-01 1/4 9/16 60 000 OD STAINLESS STEEL, CROSS SPECIAL BLOCK TYPE. FOURWAYS WITH GLANDS, SS 316, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 1 22 STRAIGHT COUPLING / �UNION CO CC93A-01 1/4 9/16 60 000 OD STAINLESS STEEL, STRAIGHT COUPLING / UNION COUPLING, WITH GLANDS, SS 316, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 1 23 BULKHEAD COUPLING CC93A-01 1/4 9/16 60 000 OD STAINLESS STEEL, BULKHEAD COUPLING, WITH GLANDS,SS 316, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 1 24 TEE WYE OR �SPECIAL CONE RIN CC93A-01 -- 2 60 000 ALLOY STEEL, TEE WYE OR SPECIAL CONE RING TEE, AISI E4340, DOW DRAWING B4- 97A-54B100, 60 000 Lb. HIGH PRESSURE FOR PIPE TYPE 2 25 FLANGE CC93A-01 -- 2 60 000 ALLOY STEEL, SPECIAL FLANGE, MACHINED FROM AISI E- 4340, DOW DRAWING B4-97A-54B100, MINIMUM YIELD STRENTH 125 000 PSI FOR PIPE TYPE 2 26 GASKET� CC93A-01 -- 2 60 000 ALLOY STEEL, GASKET SPECIAL CONE RING, AISI E4340,DOW DRAWING B4-97C-54B100, FOR PIPE TYPE 2 27 STUD BOLT CC93A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1. DOW DRAWING B4-97C-54B100, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 FOR PIPE TYPE 2 NOTES: ECP-VST-G-GEN-FT-001 307/761 B 24 R 20 A 18 N 16 C 14 H 12 10 S 8 Elaborado 25/03/2011 CÓDIGO CNE ECP-VST-P-MET-ET-006 BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES Versión 1 I 6 Z 4 E 3 2 T 1½ T 1 T 3/4 T 9/16 T 1/2 T T 3/8 T T T 1/4 T T T T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ 9/16 1/2 3/8 1/4 H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T TEE, WYE OR SPECIAL CONE RING TEE APPLICABLE CLASS: CC93A-01 N/A ECP-VST-G-GEN-FT-001 308/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 230 ASTM A-182 GR. F304L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 230 ADDITIVE ADT 150 212 DEMINERALIZED WATER DWA 200 195 CHEMICALS QUI 300 175 FUEL GAS FUG 400 160 HYDROGEN SULPHIDE SUA 500 145 NITROGEN NIT 600 140 650 125 700 110 750 95 800 80 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 DATE: 5-oct-04 RF CORROSION ALLOWANCE 1/100" POR: Adolfo Triviño / Jaime Amador PIPING CLASS CD1A03A ANSI RATING FLANGE FINISH 850 65 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 309/761 PIPING CLASS CLASS: CD1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CD1A03A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F304L, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CD1A03A-01 3 12 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE CD1A03A-01 14 24 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE CD1A03A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, SS 304L BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE CD1A03A-01 3 24 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE CD1A03A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 310/761 PIPING CLASS CLASS: CD1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 7 GLOBE VALVE CD1A03A-01 3 6 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 BUTTERFLY VALVE CD1A03A-01 3 6 150 RF STAINLESS STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE, ASTM A-182 GR. F304L OR ASTM A- 351 Gr. CF3, ACCORDING TO API 609, SUITABLE TO BE COUPLED BETWEEN FLANGES ENDS, RATING AS PER ASME B16.5, STAINLESS STEEL STEM, ASTM A-182 GR. F304L TRIM, SS 304L DISC, INCONEL SEAT, LEVEL OPERATOR 9 BUTTERFLY VALVE CD1A03A-01 8 24 150 RF STAINLESS STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE, ASTM A-182 GR. F304L OR ASTM A- 351 Gr. CF3, ACCORDING TO API 609, SUITABLE TO BE COUPLED BETWEEN FLANGES ENDS, RATING AS PER ASME B16.5, STAINLESS STEEL STEM, ASTM A-182 GR. F304L TRIM, SS 304L DISC, INCONEL SEAT, GEAR OPERATOR 10 PIPE CD1A03A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 11 PIPE CD1A03A-01 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 PIPE CD1A03A-01 8 24 BE 20S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 45 DEGREES CD1A03A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A- 182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16 11SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 45 DEGREES CD1A03A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES CD1A03A-01 8 24 BW 20S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 90 DEGREES CD1A03A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A- 182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 17 ELBOW 90 DEGREES CD1A03A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 90 DEGREES CD1A03A-01 8 24 BW 20S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CONCENTRIC REDUCER CD1A03A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 182 GR. F304L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 20 CONCENTRIC REDUCER CD1A03A-01 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 CONCENTRIC REDUCER CD1A03A-01 8 24 BW 20S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 ECCENTRIC REDUCER CD1A03A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A- 182 GR. F304L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 23 ECCENTRIC REDUCER CD1A03A-01 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ECCENTRIC REDUCER CD1A03A-01 8 24 BW 20S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 REDUCER INSERT CD1A03A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 26 CAP CD1A03A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 311/761 PIPING CLASS CLASS: CD1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 27 CAP CD1A03A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 CAP CD1A03A-01 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 CAP CD1A03A-01 8 24 BW 20S STAINLESS STEEL, CAP, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE CD1A03A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 31 STRAIGHT AND REDUCER TEE CD1A03A-01 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 STRAIGHT AND REDUCER TEE CD1A03A-01 8 24 BW 20S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 33 OLET CD1A03A-01 1/2 2 3000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F304L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 34 OLET CD1A03A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F304L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 35 OLET CD1A03A-01 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F304L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 36 OLET CD1A03A-01 8 24 BW 20S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F304L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 37 PLUG CD1A03A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME, B1.20.1, NPT 38 COUPLING CD1A03A-01 1/2 2 3000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 39 COUPLING CD1A03A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 40 HALF COUPLING CD1A03A-01 1/2 2 3000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 41 HALF COUPLING CD1A03A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 42 NIPPLE CD1A03A-01 1/2 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 43 NIPPLE CD1A03A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 44 FLANGE CD1A03A-01 1/2 2 150 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 45 FLANGE CD1A03A-01 3 6 150 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 46 FLANGE CD1A03A-01 8 24 150 RF 20S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 47 BLIND FLANGE CD1A03A-01 1/2 24 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 48 ORIFICE FLANGE CD1A03A-01 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, ASTM A 194 GR. 8M AND PLUGS ASTM A- 182 GR. F304L. ECP-VST-G-GEN-FT-001 312/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CD1A03A-01 ECP-VST-G-GEN-FT-001 313/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 230 ASTM A-182 GR. F304L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 230 ADDITIVE ADT 150 212 DEMINERALIZED WATER DWA 200 195 CHEMICALS QUI 300 175 FUEL GAS FUG 400 160 HYDROGEN SULPHIDE SUA 500 145 NITROGEN NIT 600 140 650 125 700 110 750 95 800 80 850 65 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 DATE: 5-oct-04 RF CORROSION ALLOWANCE 1/16" POR: Adolfo Triviño / Jaime Amador PIPING CLASS CD1A23A ANSI RATING FLANGE FINISH 850 65 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 314/761 PIPING CLASS CLASS: CD1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 49 ORIFICE FLANGE CD1A03A-01 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, ASTM A 194 GR. 8M AND PLUGS ASTM A- 182 GR. F304L. 50 ORIFICE FLANGE CD1A03A-01 8 24 300 RF 20S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, ASTM A 194 GR. 8M AND PLUGS ASTM A- 182 GR. F304L. 51 BLIND PLATE CD1A03A-01 14 24 150 RF STAINLESS STEEL, BLIND PLATE, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 52 SPACER RING CD1A03A-01 14 24 150 RF STAINLESS STEEL, SPACER RING, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 53 FIGURE 8 CD1A03A-01 1/2 12 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 54 DRIP RINGS CD1A03A-01 2 24 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 55 GASKET CD1A03A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 STAINLESS STEEL, STUD BOLT WITH TWO SEMI 56 BOLTING CD1A03A-01 , FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B16 / ASTM A-194 GR. 8, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 315/761 PIPING CLASS CLASS: CD1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CD1A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F304L, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CD1A23A-01 3 12 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16 10 RAISED FACE FLANGED ENDS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 3 GATE VALVE CD1A23A-01 14 24 150 RF PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE CD1A23A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, SS 304L BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE CD1A23A-01 3 24 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE CD1A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598 7 GLOBE VALVE CD1A23A-01 3 6 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598 ECP-VST-G-GEN-FT-001 316/761 PIPING CLASS CLASS: CD1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 8 BUTTERFLY VALVE CD1A23A-01 3 6 150 RF STAINLESS STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-182 GR. F304L OR ASTM A-351 Gr. CF3, ACCORDING TO API 609, SUITABLE TO BE COUPLED BETWEEN FLANGES ENDS, RATING AS PER ASME B16.5 9 BUTTERFLY VALVE CD1A23A-01 8 24 150 RF STAINLESS STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-182 GR. F304L OR ASTM A-351 Gr. CF3, ACCORDING TO API 609, SUITABLE TO BE COUPLED BETWEEN FLANGES ENDS, RATING AS PER ASME B16.5 10 PIPE CD1A23A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 11 PIPE CD1A23A-01 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 PIPE CD1A23A-01 8 24 BE 20S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 45 DEGREES CD1A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A- 182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 45 DEGREES CD1A23A-01 3 6 BW 40 STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25 15 ELBOW 45 DEGREES CD1A23A-01 8 24 BW 20S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25 16 ELBOW 90 DEGREES CD1A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A- 182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 17 ELBOW 90 DEGREES CD1A23A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 90 DEGREES CD1A23A-01 8 24 BW 20S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CONCENTRIC REDUCER CD1A23A-01 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 182 GR. F304L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 20 CONCENTRIC REDUCER CD1A23A-01 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 CONCENTRIC REDUCER CD1A23A-01 8 24 BW 20S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 ECCENTRIC REDUCER CD1A23A-01 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A- 182 GR. F304L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1 20 1 BEVELED END AS PER ASME B16 25 23 ECCENTRIC REDUCER CD1A23A-01 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ECCENTRIC REDUCER CD1A23A-01 8 24 BW 20S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 REDUCER INSERT CD1A23A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16 11 26 CAP CD1A23A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 CAP CD1A23A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 317/761 PIPING CLASS CLASS: CD1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 28 CAP CD1A23A-01 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 CAP CD1A23A-01 8 24 BW 20S STAINLESS STEEL, CAP, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE CD1A23A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16 11 31 STRAIGHT AND REDUCER TEE CD1A23A-01 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 STRAIGHT AND REDUCER TEE CD1A23A-01 8 24 BW 20S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 33 OLET CD1A23A-01 1/2 2 3000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F304L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 34 OLET CD1A23A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F304L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 35 OLET CD1A23A-01 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A 403 GR. WP304L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 36 OLET CD1A23A-01 8 24 BW 20S STAINLESS STEEL, WELDOLET, ASTM A 403 GR. WP304L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 37 PLUG CD1A23A 01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F304L, DIMENSIONS AS PER37 PLUG CD1A23A-01 1/2 2 3000 THD ,ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 38 COUPLING CD1A23A-01 1/2 2 3000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 39 COUPLING CD1A23A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 40 HALF COUPLING CD1A23A-01 1/2 2 3000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 41 HALF COUPLING CD1A23A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 42 NIPPLE CD1A23A-01 1/2 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 43 NIPPLE CD1A23A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 44 FLANGE CD1A23A-01 1/2 2 150 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 45 FLANGE CD1A23A-01 3 6 150 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 46 FLANGE CD1A23A-01 8 24 150 RF 20S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 47 BLIND FLANGE CD1A23A-01 1/2 24 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 48 ORIFICE FLANGE CD1A23A-01 1 1/2 2 300 RF 80 STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, ECP-VST-G-GEN-FT-001 318/761 PIPING CLASS CLASS: CD1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 49 ORIFICE FLANGE CD1A23A-01 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, 50 ORIFICE FLANGE CD1A23A-01 8 24 300 RF 20S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, ASTM A 194 GR. 8M AND PLUGS ASTM A-182 GR. F304L. 51 BLIND PLATE CD1A23A-01 14 24 150 RF STAINLESS STEEL, BLIND PLATE, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE END 52 SPACER RING CD1A23A-01 14 24 150 RF STAINLESS STEEL, SPACER RING, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE END 53 FIGURE 8 CD1A23A-01 1/2 12 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE END 54 DRIP RINGS CD1A23A-01 2 24 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 55 GASKET CD1A23A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM 56 BOLTING CD1A23A-01 , A-193 GR. B16 / ASTM A-194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18 2 1 AND ASME B18 2 2NOTES: ECP-VST-G-GEN-FT-001 319/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CD1A23A-01 ECP-VST-G-GEN-FT-001 320/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 600 ASTM A-182 GR. F304L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 600 ADDITIVE ADT 150 602 CHEMICALS QUI 200 605 FUEL GAS FUG 300 455 HYDROGEN SULPHIDE SUA 400 415 NITROGEN NIT 500 380 600 360 650 350 700 345 750 335 800 330 850 320 CORROSION ALLOWANCE 1/16" POR: Adolfo Triviño / Jaime Amador PIPING CLASS CD2A23A-01 ANSI RATING FLANGE FINISH PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 DATE: 5-oct-04 RF NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 321/761 PIPING CLASS CLASS: CD2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CD2A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F304L, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CD2A23A-01 3 12 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE CD2A23A-01 14 24 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 , , RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE CD2A23A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, SS 304L BALL, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE CD2A23A-01 3 24 300 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, TRIM 304L, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 GLOBE VALVE CD2A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598 7 GLOBE VALVE CD2A23A-01 3 6 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598 8 BUTTERFLY VALVE CD2A23A-01 3 6 300 RF STAINLESS STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE, ASTM A-182 GR. F304L OR ASTM A-351 Gr. CF3, ACCORDING TO API 609, SUITABLE TO BE COUPLED BETWEEN FLANGES ENDS, RATING AS PER ASME B16.5 ECP-VST-G-GEN-FT-001 322/761 PIPING CLASS CLASS: CD2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 9 BUTTERFLY VALVE CD2A23A-01 8 24 300 RF STAINLESS STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE, ASTM A-182 GR. F304L OR ASTM A-351 Gr. CF3, ACCORDING TO API 609, SUITABLE TO BE COUPLED BETWEEN FLANGES ENDS, RATING AS PER ASME B16.5 10 PIPE CD2A23A-01 1/2 2 PE 80 STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 11 PIPE CD2A23A-01 3 24 BE 40 STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES CD2A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A- 182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES CD2A23A-01 3 24 BW 40 STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 90 DEGREES CD2A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A- 182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 15 ELBOW 90 DEGREES CD2A23A-01 3 24 BW 40 STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 CONCENTRIC REDUCER CD2A23A-01 1/2 2 80 STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 182 GR. F304L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 17 CONCENTRIC REDUCER CD2A23A-01 3 24 BW 40 STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 ECCENTRIC REDUCER CD2A23A-01 1/2 2 80 STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A- 182 GR. F304L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25, 19 ECCENTRIC REDUCER CD2A23A-01 3 24 BW 40 STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 REDUCER INSERT CD2A23A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A- 182 GR. F304L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 21 CAP CD2A23A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 22 CAP CD2A23A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 CAP CD2A23A-01 3 24 BW 40 STAINLESS STEEL, CAP, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 STRAIGHT AND REDUCER TEE CD2A23A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 25 STRAIGHT AND REDUCER TEE CD2A23A-01 3 24 BW 40 STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A 403 GR. WP304L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 26 OLET CD2A23A-01 1/2 2 3000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F304L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 OLET CD2A23A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F304L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 28 OLET CD2A23A-01 3 24 BW 40 STAINLESS STEEL, WELDOLET, ASTM A 403 GR. WP304L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 29 PLUG CD2A23A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 323/761 PIPING CLASS CLASS: CD2A23A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 30 COUPLING CD2A23A-01 1/2 2 3000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 31 COUPLING CD2A23A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 32 HALF COUPLING CD2A23A-01 1/2 2 3000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 33 HALF COUPLING CD2A23A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 34 NIPPLE CD2A23A-01 1/2 2 THD 80 STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 NIPPLE CD2A23A-01 1/2 2 PE 80 STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP304L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 36 FLANGE CD2A23A-01 1/2 2 300 RF 80 STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 37 FLANGE CD2A23A-01 3 24 300 RF 40 STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 38 BLIND FLANGE CD2A23A-01 1/2 24 300 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 39 ORIFICE FLANGE CD2A23A-01 1 1/2 2 300 RF 80 STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, ASTM A 194 GR. 8M AND PLUGS ASTM A-182 GR. F304L. STAINLESS STEEL, SET OF WELDING NECK 40 ORIFICE FLANGE CD2A23A-01 3 24 300 RF 40 , ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F304L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, ASTM A 194 GR. 8M AND PLUGS ASTM A-182 GR. F304L. 41 BLIND PLATE CD2A23A-01 14 24 300 RF STAINLESS STEEL, BLIND PLATE, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 42 SPACER RING CD2A23A-01 14 24 300 RF STAINLESS STEEL, SPACER RING, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 43 FIGURE 8 CD2A23A-01 1/2 12 300 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 44 DRIP RINGS CD2A23A-01 2 24 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 304L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 45 GASKET CD2A23A-01 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 46 BOLTING CD2A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B16 / ASTM A-194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 324/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CD2A23A-01 ECP-VST-G-GEN-FT-001 325/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 275 ASTM A-182 GR. F321 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 275 HYDROCARBONS + HYDROGEN HYH 150 260 200 245 300 230 400 200 500 170 600 140 650 125 700 110 750 95 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS CE1A03A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/100" FLANGE FINISH DATE: 800 80 850 65 900 50 950 35 1000 20 1050 ,,, 1100 ,,, 1150 ,,, 1200 ,,, NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.4 150 300 600 900 1500 -20 to 100 275 720 1440 2160 3600 150 260 680 1365 2045 3347 200 245 645 1290 1935 3230 300 230 595 1190 1785 2975 400 200 550 1105 1655 2760 500 170 515 1030 1545 2570 600 140 485 975 1460 2435 650 125 480 955 1435 2390 700 110 465 930 1395 2330 750 95 460 915 1375 2290 800 80 450 900 1355 2255 850 65 445 895 1340 2230 900 50 440 885 1325 2210 950 35 385 775 1160 1930 1000 20 355 715 1070 1785 1050 ,,, 315 625 940 1565 1100 ,,, 270 545 815 1360 1150 ,,, 235 475 710 1185 1200 ,,, 185 370 555 925 ECP-VST-G-GEN-FT-001 326/761 PIPING CLASS CLASS: CE1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATIN G FAC E SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CE1A03A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F321 (AISI 321), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CE1A03A-01 3 6 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 GATE VALVE CE1A03A-01 8 12 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 4 GATE VALVE CE1A03A-01 14 24 150 RF , , RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 5 CHECK VALVE CE1A03A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A- 182 GR. F321 (AISI 321), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, . 6 CHECK VALVE CE1A03A-01 3 6 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 7 CHECK VALVE CE1A03A-01 8 24 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 8 GLOBE VALVE CE1A03A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F321 (AISI 321), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 327/761 PIPING CLASS CLASS: CE1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATIN G FAC E SCHEDULE COMPONENTS DESCRIPTION NOTES 9 GLOBE VALVE CE1A03A-01 3 6 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 10 PIPE CE1A03A-01 1/2 2 PE 10S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP321,DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 11 PIPE CE1A03A-01 3 8 BE 10S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP321, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 PIPE CE1A03A-01 10 24 BE 5S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP321, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 45 DEGREES CE1A03A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 14 ELBOW 45 DEGREES CE1A03A-01 3 8 BW 10S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES CE1A03A-01 10 24 BW 5S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 90 DEGREES CE1A03A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 17 ELBOW 90 DEGREES CE1A03A-01 3 8 BW 10S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 90 DEGREES CE1A03A-01 10 24 BW 5S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 CONCENTRIC REDUCER CE1A03A 01 1/2 2 10S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 321, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR19 CONCENTRIC REDUCER CE1A03A-01 1/2 2 10S WP 321, DIMENSIONS AS PER MSS SP 95, PLAIN END, ORTHREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 20 CONCENTRIC REDUCER CE1A03A-01 3 8 BW 10S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 CONCENTRIC REDUCER CE1A03A-01 10 24 BW 5S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 22 ECCENTRIC REDUCER CE1A03A-01 1/2 2 10S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 321, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 23 ECCENTRIC REDUCER CE1A03A-01 3 8 BW 10S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 ECCENTRIC REDUCER CE1A03A-01 10 24 BW 5S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 REDUCER INSERT CE1A03A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 26 CAP CE1A03A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 CAP CE1A03A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 CAP CE1A03A-01 3 8 BW 10S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 CAP CE1A03A-01 10 24 BW 5S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE CE1A03A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A- 182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 31 STRAIGHT AND REDUCER TEE CE1A03A-01 3 8 BW 10S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A- 403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 STRAIGHT AND REDUCER TEE CE1A03A-01 10 24 BW 5S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A- 403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 328/761 PIPING CLASS CLASS: CE1A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATIN G FAC E SCHEDULE COMPONENTS DESCRIPTION NOTES 33 OLET CE1A03A-01 1/2 2 3000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 34 OLET CE1A03A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 35 OLET CE1A03A-01 3 8 BW 10S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 36 OLET CE1A03A-01 10 24 BW 5S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 37 PLUG CE1A03A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 38 COUPLING CE1A03A-01 1/2 2 3000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 39 COUPLING CE1A03A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 40 HALF COUPLING CE1A03A-01 1/2 2 3000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 41 HALF COUPLING CE1A03A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 42 NIPPLE CE1A03A-01 1/2 2 THD 40S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP321, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 43 NIPPLE CE1A03A-01 1/2 2 PE 10S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312GR. TP321, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 44 FLANGE CE1A03A-01 1/2 2 150 RF 10S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 45 FLANGE CE1A03A-01 3 8 150 RF 10S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 46 FLANGE CE1A03A-01 10 24 150 RF 5S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR F321 DIMENSIONS AS PER ASME B16 5 RAISED FACE46 FLANGE CE1A03A 01 10 24 150 RF 5S GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 47 BLIND FLANGE CE1A03A-01 1/2 24 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 48 ORIFICE FLANGE CE1A03A-01 1 1/2 2 300 RF 10S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A- 182 GR. F321 49 ORIFICE FLANGE CE1A03A-01 3 8 300 RF 10S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A- 182 GR. F321 50 ORIFICE FLANGE CE1A03A-01 10 24 300 RF 5S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A- 182 GR. F321 51 FIGURE 8 CE1A03A-01 1/2 12 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 321,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 52 BLIND PLATE CE1A03A-01 14 24 150 RF STAINLESS STEEL, BLIND PLATE, ASTM A-240 GR. 321,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 53 SPACER RING CE1A03A-01 14 24 150 RF STAINLESS STEEL, SPACER RING, ASTM A-240 GR. 321,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 54 DRIP RINGS CE1A03A-01 2 24 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A- 240 GR. 321, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 55 GASKET CE1A03A-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 321 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 56 BOLTING CE1A03A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B8T / ASTM A 194 GR. 8T, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 329/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CE1A03A-01 ECP-VST-G-GEN-FT-001 330/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 720 ASTM A-182 GR. F321 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 720 HYDROCARBONS + HYDROGEN HYH 150 680 200 645 300 595 400 550 500 515 600 485 650 480 700 465 750 460 800 450 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS CE2A03A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/100" FLANGE FINISH DATE: 5-oct-04 850 445 900 440 950 385 1000 355 1050 315 1100 270 1150 235 1200 185 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.4 150 300 600 900 1500 -20 to 100 275 720 1440 2160 3600 150 260 680 1365 2045 3347 200 245 645 1290 1935 3230 300 230 595 1190 1785 2975 400 200 550 1105 1655 2760 500 170 515 1030 1545 2570 600 140 485 975 1460 2435 650 125 480 955 1435 2390 700 110 465 930 1395 2330 750 95 460 915 1375 2290 800 80 450 900 1355 2255 850 65 445 895 1340 2230 900 50 440 885 1325 2210 950 35 385 775 1160 1930 1000 20 355 715 1070 1785 1050 ,,, 315 625 940 1565 1100 ,,, 270 545 815 1360 1150 ,,, 235 475 710 1185 1200 ,,, 185 370 555 925 ECP-VST-G-GEN-FT-001 331/761 PIPING CLASS CLASS: CE2A03A Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CE2A03A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F321 (AISI 321), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CE2A03A-01 3 6 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL STAINLESS STEEL GATE VALVE ASTM A 351 GR PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 3 GATE VALVE CE2A03A-01 8 12 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE CE2A03A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F321 (AISI 321), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, . 5 CHECK VALVE CE2A03A-01 3 12 300 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . ECP-VST-G-GEN-FT-001 332/761 PIPING CLASS CLASS: CE2A03A Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 6 GLOBE VALVE CE2A03A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F321 (AISI 321), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 GLOBE VALVE CE2A03A-01 3 6 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 8 PIPE CE2A03A-01 1/2 2 PE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP321, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 9 PIPE CE2A03A-01 3 12 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP321, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A- 10 ELBOW 45 DEGREES CE2A03A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A 182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 11 ELBOW 45 DEGREES CE2A03A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 90 DEGREES CE2A03A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A- 182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 90 DEGREES CE2A03A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 CONCENTRIC REDUCER CE2A03A-01 1/2 2 40S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 403 GR. WP 321, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 15 CONCENTRIC REDUCER CE2A03A-01 3 12 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 ECCENTRIC REDUCER CE2A03A-01 1/2 2 40S STAINLESS STEEL, ECENTRIC SWAGE, ASTM A-403 GR. WP 321, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 17 ECCENTRIC REDUCER CE2A03A-01 3 12 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 REDUCER INSERT CE2A03A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 19 CAP CE2A03A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 20 CAP CE2A03A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 21 CAP CE2A03A-01 3 12 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 333/761 PIPING CLASS CLASS: CE2A03A Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 22 STRAIGHT AND REDUCER TEE CE2A03A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 23 STRAIGHT AND REDUCER TEE CE2A03A-01 3 12 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 OLET CE2A03A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 25 OLET CE2A03A-01 3 12 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 26 PLUG CE2A03A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 27 COUPLING CE2A03A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 HALF COUPLING CE2A03A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 NIPPLE CE2A03A-01 1/2 2 PE 40S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP321, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 30 FLANGE CE2A03A-01 1/2 2 300 RF 40S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 31 FLANGE CE2A03A-01 3 12 300 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR F321 DIMENSIONS AS PER ASME B16 531 FLANGE CE2A03A 01 3 12 300 RF 40S A 182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 32 BLIND FLANGE CE2A03A-01 1/2 12 300 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 33 ORIFICE FLANGE CE2A03A-01 1 1/2 2 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F321 34 ORIFICE FLANGE CE2A03A-01 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR B16 NUTS ASTM A 194 GR 8M AND PLUGS 35 FIGURE 8 CE2A03A-01 1/2 12 300 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 321, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 36 DRIP RINGS CE2A03A-01 2 12 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 321, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 37 GASKET CE2A03A-01 1/2 12 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 321 SS, DIMENSIONS AS PER ASME B16 20 SUITABLE FOR RAISED FACE FLANGES 38 BOLTING CE2A03A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B8T / ASTM A 194 GR. 8T, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 334/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CE2A03A-01 ECP-VST-G-GEN-FT-001 335/761 Elaborado 25/03/2011 CLASS 600 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL To: 1440 ASTM A-182 GR. F321 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1440 HYDROCARBONS + HYDROGEN HYH 150 1365 200 1290 300 1190 400 1105 500 1030 600 975 650 955 700 930 750 915 800 900 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/100" FLANGE FINISH DATE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS CE3A03A-01 ANSI RATING 850 895 900 885 950 775 1000 715 1050 625 1100 545 1150 475 1200 370 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.4 150 300 600 900 1500 -20 to 100 275 720 1440 2160 3600 150 260 680 1365 2045 3347 200 245 645 1290 1935 3230 300 230 595 1190 1785 2975 400 200 550 1105 1655 2760 500 170 515 1030 1545 2570 600 140 485 975 1460 2435 650 125 480 955 1435 2390 700 110 465 930 1395 2330 750 95 460 915 1375 2290 800 80 450 900 1355 2255 850 65 445 895 1340 2230 900 50 440 885 1325 2210 950 35 385 775 1160 1930 1000 20 355 715 1070 1785 1050 ,,, 315 625 940 1565 1100 ,,, 270 545 815 1360 1150 ,,, 235 475 710 1185 1200 ,,, 185 370 555 925 ECP-VST-G-GEN-FT-001 336/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CE3A03A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F321 (AISI 321), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, ACCORDING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 2 GATE VALVE CE3A03A-01 3 6 600 RF GR. CF8C (AISI 347) OR AISI 321, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL ECP-VST-G-GEN-FT-001 337/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 3 GATE VALVE CE3A03A-01 8 10 600 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE FLEXIBLE WEDGE STELLITE 4 CHECK VALVE CE3A03A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F321 (AISI 321), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF8C (AISI 347) OR AISI 321, DIMENSIONS AS PER ASME 5 CHECK VALVE CE3A03A-01 3 10 600 RF B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE ECP-VST-G-GEN-FT-001 338/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 6 GLOBE VALVE CE3A03A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A- 182 GR. F321 (AISI 321), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE 7 GLOBE VALVE CE3A03A-01 3 6 600 RF STAINLESS STEEL, GLOBE VALVE, ASTM A- 351 GR. CF8C (AISI 347) OR AISI 321, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 321, AISI 321 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER 8 PIPE CE3A03A-01 1/2 2 PE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A- 312 GR. TP321, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 9 PIPE CE3A03A-01 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A- 312 GR. TP321, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 339/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 10 PIPE CE3A03A-01 8 10 BE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A- 312 GR. TP321, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES CE3A03A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS 12 ELBOW 45 DEGREES CE3A03A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 45 DEGREES CE3A03A-01 8 10 BW 80S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 90 DEGREES CE3A03A-01 1/2 2 6000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS 15 ELBOW 90 DEGREES CE3A03A-01 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS ASTM A-403 GR WP 32116 ELBOW 90 DEGREES CE3A03A-01 8 10 BW 80S LONG RADIUS, ASTM A-403 GR. WP 321,DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 340/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 17 CONCENTRIC REDUCER CE3A03A-01 1/2 2 40S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 321, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END 18 CONCENTRIC REDUCER CE3A03A-01 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 19 CONCENTRIC REDUCER CE3A03A-01 8 10 BW 80S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 20 ECCENTRIC REDUCER CE3A03A-01 1/2 2 40S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 321, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END 21 ECCENTRIC REDUCER CE3A03A-01 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 22 ECCENTRIC REDUCER CE3A03A-01 8 10 BW 80S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER 23 REDUCER INSERT CE3A03A-01 1/2 2 6000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16 11 MALE x FEMALE SOCKET WELDINGB16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 341/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 24 CAP CE3A03A-01 1/2 2 6000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME 25 CAP CE3A03A-01 1/2 2 6000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 26 CAP CE3A03A-01 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 CAP CE3A03A-01 8 10 BW 80S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 STRAIGHT AND REDUCER TEE CE3A03A-01 1/2 2 6000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 STRAIGHT AND REDUCER TEE CE3A03A-01 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 STRAIGHT AND REDUCER TEE CE3A03A-01 8 10 BW 80S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 321, DIMENSIONS AS PER ASME B16 9 BEVELED ENDS AS PERAS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 342/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 31 OLET CE3A03A-01 1/2 2 6000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME 32 OLET CE3A03A-01 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 33 OLET CE3A03A-01 8 10 BW 80S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F321, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 34 PLUG CE3A03A-01 1/2 2 6000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 35 COUPLING CE3A03A-01 1/2 2 6000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 36 HALF COUPLING CE3A03A-01 1/2 2 6000 SW STAINLESS STEEL, HALF COUPLING, ASTM A- 182 GR. F321, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER 37 NIPPLE CE3A03A-01 1/2 2 PE 40S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP321, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS STAINLESS STEEL SOCKET WELDING 38 FLANGE CE3A03A-01 1/2 2 600 RF 40S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED ECP-VST-G-GEN-FT-001 343/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 39 FLANGE CE3A03A-01 3 6 600 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 40 FLANGE CE3A03A-01 8 10 600 RF 80S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 41 BLIND FLANGE CE3A03A-01 1/2 10 600 RF STAINLESS STEEL, BLIND FLANGE, ASTM A- 182 GR. F321, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 42 ORIFICE FLANGE CE3A03A-01 1 1/2 2 600 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A- 182 GR. F321, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM 43 ORIFICE FLANGE CE3A03A-01 3 6 600 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A- 182 GR. F321, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16 36 COMPLETE WITH SPACINGASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM ECP-VST-G-GEN-FT-001 344/761 PIPING CLASS CLASS: CE3A03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 44 ORIFICE FLANGE CE3A03A-01 8 10 600 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A- 182 GR. F321, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM 45 FIGURE 8 CE3A03A-01 1/2 10 600 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A- 240 GR. 321, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 46 DRIP RINGS CE3A03A-01 2 10 600 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A- 240 GR. 321, DIMENSIONS AS PER ASME 47 GASKET CE3A03A-01 1/2 10 600 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 321 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL 48 BOLTING CE3A03A-01 SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B8T / ASTM A 194 GR. 8T, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME NOTES: ECP-VST-G-GEN-FT-001 345/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CE3A03A-01 ECP-VST-G-GEN-FT-001 346/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAIINLESS STEEL To: 230 ASTM A-182 GR. F317L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 230 CRUDE OIL CRU 150 212 GASOIL GLS 200 195 PARAPHINIC CRUDE CRP 300 175 LIGHT GASOIL LGO 400 160 HEAVY GASOIL HGO 500 145 600 140 650 125 700 110 750 95 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS CG1A23A-01 ANSI RATING 750 95 800 80 850 65 NOTES: 1.- DESIGN CALCULATIONS AS PER ASME B31.3. 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 347/761 PIPING CLASS CLASS: CG1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CG1A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F317L (AISI 317L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CG1A23A-01 3 6 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CG3M (AISI 317L), ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, RENEWABLE SEAT RINGS, HANDWHEEL 3 GATE VALVE CG1A23A-01 8 12 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CG3M (AISI 317L), ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 , , , FLEXIBLE WEDGE, RENEWABLE SEAT RINGS, GEAR OPERATOR 4 CHECK VALVE CG1A23A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F317L (AISI 317L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE CG1A23A-01 3 6 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CG3M (AISI 317L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 CHECK VALVE CG1A23A-01 8 12 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CG3M (AISI 317L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 7 GLOBE VALVE CG1A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F317L (AISI 317L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, HANDWHEEL ECP-VST-G-GEN-FT-001 348/761 PIPING CLASS CLASS: CG1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 8 GLOBE VALVE CG1A23A-01 3 6 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CG3M (AISI 317L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, RENEWABLE SEAT RINGS, HANDWHEEL 9 PIPE CG1A23A-01 1/2 2 PE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR.TP317L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 10 PIPE CG1A23A-01 3 8 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP317L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 11 PIPE CG1A23A-01 10 12 BE 10S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP317L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES CG1A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 13 ELBOW 45 DEGREES CG1A23A-01 3 8 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 45 DEGREES CG1A23A-01 10 12 BW 10S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 90 DEGREES CG1A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 16 ELBOW 90 DEGREES CG1A23A-01 3 8 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME16 ELBOW 90 DEGREES CG1A23A 01 3 8 BW 40S ASTM A 403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES CG1A23A-01 10 12 BW 10S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 CONCENTRIC REDUCER CG1A23A-01 1/2 2 40S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 19 CONCENTRIC REDUCER CG1A23A-01 3 8 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A- 403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CONCENTRIC REDUCER CG1A23A-01 10 12 BW 10S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A- 403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 ECCENTRIC REDUCER CG1A23A-01 1/2 2 40S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 22 ECCENTRIC REDUCER CG1A23A-01 3 8 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER CG1A23A-01 10 12 BW 10S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 REDUCER INSERT CG1A23A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 25 CAP CG1A23A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 26 CAP CG1A23A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 27 CAP CG1A23A-01 3 8 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 CAP CG1A23A-01 10 12 BW 10S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 STRAIGHT AND REDUCER TEE CG1A23A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 349/761 PIPING CLASS CLASS: CG1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 30 STRAIGHT AND REDUCER TEE CG1A23A-01 3 8 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 STRAIGHT AND REDUCER TEE CG1A23A-01 10 12 BW 10S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 OLET CG1A23A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F317L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 33 OLET CG1A23A-01 3 8 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F317L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 34 OLET CG1A23A-01 10 12 BW 10S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F317L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 35 PLUG CG1A23A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A- 182 GR. F317L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 36 COUPLING CG1A23A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 37 HALF COUPLING CG1A23A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 38 NIPPLE CG1A23A-01 1/2 2 PE 40S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 312 GR. TP317, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 39 FLANGE CG1A23A-01 1/2 2 150 RF 40S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A- 182 GR. F317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 40 FLANGE CG1A23A-01 3 8 150 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A- 182 GR. F317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END STAINLESS STEEL WELDING NECK FLANGE ASTM A 41 FLANGE CG1A23A-01 10 12 150 RF 10S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A- 182 GR. F317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 42 BLIND FLANGE CG1A23A-01 1/2 12 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 43 ORIFICE FLANGE CG1A23A-01 1 1/2 2 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A- 194 GR. 8M AND PLUGS ASTM A-182 GR. F317L 44 ORIFICE FLANGE CG1A23A-01 3 8 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A- 194 GR. 8M AND PLUGS ASTM A-182 GR. F317L 45 ORIFICE FLANGE CG1A23A-01 10 12 300 RF 10S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A- 194 GR. 8M AND PLUGS ASTM A-182 GR. F317L 46 FIGURE 8 CG1A23A-01 1/2 12 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 47 DRIP RINGS CG1A23A-01 2 12 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 48 GASKET CG1A23A-01 1/2 12 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 317L SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 49 BOLTING CG1A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 350/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CG1A23A-01 ECP-VST-G-GEN-FT-001 351/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 STAIINLESS STEEL To: 600 ASTM A-182 GR. F317L DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 600 CRUDE OIL CRU 150 602 GASOIL GLS 200 605 LIGHT GASOIL LGO 300 455 HEAVY GASOIL HGO 400 415 500 380 600 360 650 350 700 345 750 335 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS CG2A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 800 330 850 320 NOTES: 1.- DESIGN CALCULATIONS AS PER ASME B31.3. 150 300 600 900 1500 -20 to 100 230 600 1200 1800 3000 150 212 602 1107 1660 2765 200 195 605 1015 1520 2530 300 175 455 910 1360 2270 400 160 415 825 1240 2065 500 145 380 765 1145 1910 600 140 360 720 1080 1800 650 125 350 700 1060 1750 700 110 345 685 1030 1715 750 95 335 670 1010 1680 800 80 330 660 985 1645 850 65 320 645 965 1610 900 950 1000 ECP-VST-G-GEN-FT-001 352/761 PIPING CLASS CLASS: CG2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CG2A23A-01 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F317L (AISI 317L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE CG2A23A-01 3 6 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CG3M (AISI 317L), ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, RENEWABLE SEAT RINGS, HANDWHEEL 3 GATE VALVE CG2A23A-01 8 12 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CG3M (AISI 317L), ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, RENEWABLE SEAT RINGS, GEAR OPERATOR 4 CHECK VALVE CG2A23A-01 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F317L (AISI 317L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598 TRIM 317L AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES Elaborado 25/03/2011 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT RINGS, . 5 CHECK VALVE CG2A23A-01 3 12 300 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CG3M (AISI 317L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 6 CHECK VALVE CG2A23A-01 8 12 300 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CG3M (AISI 317L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 7 GLOBE VALVE CG2A23A-01 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F317L (AISI 317L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, HANDWHEEL 8 GLOBE VALVE CG2A23A-01 3 6 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CG3M (AISI 317L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM 317L, AISI 317 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, RENEWABLE SEAT RINGS, HANDWHEEL 9 PIPE CG2A23A-01 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP317L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 10 PIPE CG2A23A-01 3 12 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP317L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES CG2A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES CG2A23A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 90 DEGREES CG2A23A-01 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 353/761 PIPING CLASS CLASS: CG2A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 14 ELBOW 90 DEGREES CG2A23A-01 3 12 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 CONCENTRIC REDUCER CG2A23A-01 1/2 2 40S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 16 CONCENTRIC REDUCER CG2A23A-01 3 12 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ECCENTRIC REDUCER CG2A23A-01 1/2 2 40S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 18 ECCENTRIC REDUCER CG2A23A-01 3 12 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 REDUCER INSERT CG2A23A-01 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 20 CAP CG2A23A-01 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 21 CAP CG2A23A-01 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 CAP CG2A23A-01 3 12 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 STRAIGHT AND REDUCER TEE CG2A23A-01 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 24 STRAIGHT AND REDUCER TEE CG2A23A-01 3 12 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 317L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 OLET CG2A23A-01 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F317L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 26 OLET CG2A23A-01 3 12 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F317L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 27 PLUG CG2A23A-01 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 COUPLING CG2A23A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 29 HALF COUPLING CG2A23A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 30 NIPPLE CG2A23A-01 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP317, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 31 FLANGE CG2A23A-01 1/2 2 300 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 32 FLANGE CG2A23A-01 3 12 300 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 33 BLIND FLANGE CG2A23A-01 1/2 12 300 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 34 ORIFICE FLANGE CG2A23A-01 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F317L 35 ORIFICE FLANGE CG2A23A-01 3 12 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F317L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F317L 36 FIGURE 8 CG2A23A-01 1/2 12 300 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 37 DRIP RINGS CG2A23A-01 2 12 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 317L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 38 GASKET CG2A23A-01 1/2 12 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 317L SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 39 BOLTING CG2A23A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 354/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CG2A23A-01 ECP-VST-G-GEN-FT-001 355/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALLOY 20 To: 290 ASTM B462 GR. N08020 (ANNEALED MATERIAL ONLY) DESIGN TEMPERATURE (°F): From: -20 To: 450 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 290 SPENT SULPHURIC ACID. MISCELLANEOUS SERVICE ACDB 150 275 200 260 300 230 400 200 450 185 500 170 600 140 650 125 700 110 CORROSION ALLOWANCE 1/100" POR: Adolfo Triviño / Jaime Amador FLANGE FINISH DATE: 5-oct-04 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 RF PIPING CLASS CM1A03A-01 ANSI RATING 750 95 800 80 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 3.1 2.- DESIGN CALCULATIONS AS PER ASME B31.3. 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 275 735 1470 2205 3675 200 260 720 1440 2160 3600 300 230 715 1425 2140 3565 400 200 675 1345 2020 3365 450 185 665 1327 1992 3320 500 170 655 1310 1965 3275 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 900 950 1000 ECP-VST-G-GEN-FT-001 356/761 PIPING CLASS CLASS: CM1A03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CM1A03A-01 1/2 2 150 RF ALLOY 20 STEEL, GATE VALVE, ASTM A-351 GR. CN7M, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, HARDFACE SEATS, HANDWHEEL 2 GATE VALVE CM1A03A-01 2 12 150 RF ALLOY 20 STEEL, GATE VALVE, ASTM A-351 GR. CN7M, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, HARDFACE SEATS, HANDWHEEL 3 GATE VALVE CM1A03A-01 14 24 150 RF ALLOY 20 STEEL, GATE VALVE, ASTM A-351 GR. CN7M, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, HARDFACE SEATS, GEAR OPERATOR 4 CHECK VALVE CM1A03A-01 1/2 12 150 RF ALLOY 20 STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CN7M, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, HARDFACE SEATS, 5 GLOBE VALVE CM1A03A-01 1/2 12 150 RF ALLOY 20 STEEL, GLOBE VALVE, ASTM A-351 GR. CN7M, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598 ALLOY 20 TRIM BOLTED BONNET PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, HARDFACE SEATS, HANDWHEEL 6 BUTTERFLY VALVE CM1A03A-01 3 6 150 RF ALLOY 20 STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-351 GR. CN7M, ACCORDING TO API 609, SUITABLE TO BE COUPLED BETWEEN FLANGES ENDS, RATING AS PER ASME B16.5, TESTS AS PER API 598 7 BUTTERFLY VALVE CM1A03A-01 8 24 150 RF ALLOY 20 STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-351 GR. CN7M, ACCORDING TO API 609, SUITABLE TO BE COUPLED BETWEEN FLANGES ENDS, RATING AS PER ASME B16.5, TESTS AS PER API 598 8 PLUG VALVE CM1A03A-01 1 2 150 RF ALLOY 20 STEEL, PLUG VALVE, ASTM A-351 GR. CN7M, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16 34 TEST AS PER API 598 ALLOY 20 9 PLUG VALVE CM1A03A-01 3 6 150 RF ALLOY 20 STEEL, PLUG VALVE, ASTM A-351 GR. CN7M, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16 34 TEST AS PER API 598 ALLOY 20 10 PIPE CM1A03A-01 1/2 2 PE 40S ALLOY 20 STEEL, WELDED PIPE, ASTM B-464 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 11 PIPE CM1A03A-01 3 24 BE 10S ALLOY 20 STEEL, WELDED PIPE, ASTM B-464 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 12 ELBOW 45 DEGREES CM1A03A-01 1/2 2 3000 SW ALLOY 20 STEEL, ELBOW 45 DEGREES, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 357/761 PIPING CLASS CLASS: CM1A03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 13 ELBOW 45 DEGREES CM1A03A-01 3 24 BW 10S ALLOY 20 STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 90 DEGREES CM1A03A-01 1/2 2 3000 SW ALLOY 20 STEEL, ELBOW 90 DEGREES, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 15 ELBOW 90 DEGREES CM1A03A-01 3 24 BW 10S ALLOY 20 STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 CONCENTRIC REDUCER CM1A03A-01 1/2 2 40S ALLOY 20 STEEL, CONCENTRIC SWAGE, ASTM B- 366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER MSS-SP-95, ENDS AS PER ASME B16.25 / B16.11 / B1.20.1 17 CONCENTRIC REDUCER CM1A03A-01 3 24 BW 10S ALLOY 20 STEEL, CONCENTRIC REDUCER, ASTM B- 366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 ECCENTRIC REDUCER CM1A03A-01 1/2 2 40S ALLOY 20 STEEL, ECCENTRIC SWAGE, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER MSS-SP-95, ENDS AS PER ASME B16.25 / B16.11 / B1.20.1 19 ECCENTRIC REDUCER CM1A03A-01 3 24 BW 10S ALLOY 20 STEEL, ECCENTRIC REDUCER, ASTM B- 366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 CAP CM1A03A-01 1/2 2 3000 THD ALLOY 20 STEEL, CAP, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 21 CAP CM1A03A-01 1/2 2 3000 SW ALLOY 20 STEEL, CAP, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 22 CAP CM1A03A-01 3 24 BW 10S ALLOY 20 STEEL, CAP, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25BEVELED ENDS AS PER ASME B16.25 23 STRAIGHT AND REDUCER TEE CM1A03A-01 1/2 2 3000 SW ALLOY 20 STEEL, STRAIGHT TEE, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 24 STRAIGHT AND REDUCER TEE CM1A03A-01 3 24 BW 10S ALLOY 20 STEEL, STRAIGHT TEE, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 STUB END CM1A03A-01 1/2 2 BW 40S ALLOY 20 STEEL, STUB END, TYPE SHORT PATTERN, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.9 / MSS-SP-43, BEVELED ENDS AS PER ASME B16.25 26 STUB END CM1A03A-01 3 24 BW 10S ALLOY 20 STEEL, STUB END, TYPE SHORT PATTERN, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.9 / MSS-SP-43, BEVELED ENDS AS PER ASME B16.25 27 OLET CM1A03A-01 1/2 2 3000 THD ALLOY 20 STEEL, THREDOLET, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER MSS-SP- 97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 OLET CM1A03A-01 1/2 2 3000 SW ALLOY 20 STEEL, SOCKOLET, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING ENDS AS PER ASME B16.11 29 OLET CM1A03A-01 3 24 BW 10S ALLOY 20 STEEL, WELDOLET, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 30 PLUG CM1A03A-01 1/2 2 3000 THD ALLOY 20 STEEL, PLUG SOLID, ROUND HEAD, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 31 COUPLING CM1A03A-01 1/2 2 3000 THD ALLOY 20 STEEL, COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 32 COUPLING CM1A03A-01 1/2 2 3000 SW ALLOY 20 STEEL, COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 358/761 PIPING CLASS CLASS: CM1A03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 33 HALF COUPLING CM1A03A-01 1/2 2 3000 THD ALLOY 20 STEEL, HALF COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 34 HALF COUPLING CM1A03A-01 1/2 2 3000 SW ALLOY 20 STEEL, HALF COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 35 REDUCER COUPLING CM1A03A-01 1/2 2 3000 SW ALLOY 20 STEEL, HALF COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 36 NIPPLE CM1A03A-01 1/2 2 THD 40S ALLOY 20 STEEL, NIPPLE, WELDED PIPE, ASTM B- 464 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 37 NIPPLE CM1A03A-01 1/2 2 PE 40S ALLOY 20 STEEL, NIPPLE, WELDED PIPE, ASTM B- 464 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 38 FLANGE CM1A03A-01 1/2 2 150 RF 40S ALLOY 20 STEEL, SOCKET WELDING FLANGE, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 39 FLANGE CM1A03A-01 3 24 150 RF 10S CARBON STEEL, LAP JOINT, ASTM A-105, WITH EPOXY COATING, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 40 BLIND FLANGE CM1A03A-01 1/2 24 150 RF ALLOY 20 STEEL, BLIND FLANGE, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 41 ORIFICE FLANGE CM1A03A-01 1 1/2 24 300 RF 40S ALLOY 20 STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16 36 42 BLIND PLATE CM1A03A-01 14 24 150 RF ALLOY 20 STEEL, BLIND PLATE, ASTM B-463 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16 5 RAISED FACE ENDSB16.5, RAISED FACE ENDS 43 SPACER RING CM1A03A-01 14 24 150 RF ALLOY 20 STEEL, SPACER RING, ASTM B-463 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 44 FIGURE 8 CM1A03A-01 1/2 12 150 RF ALLOY 20 STEEL, FIGURE 8 BLIND, ASTM B-463 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 45 DRIP RINGS CM1A03A-01 2 12 150 RF ALLOY 20 STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM B-463 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 46 GASKET CM1A03A-01 1/2 24 150 RF ALLOY 20 STEEL, GASKET, FLAT RING, THICKNESS 1/8" INCHES, GARLOCK STYLE GYLON 3500 OR EQUIVALENT, DIMENSIONS AS PER ASME B16.21, 47 BOLTING CM1A03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMIFINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGHT AS PER ASME B1. 1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 48 BOLTING CM1A03A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMIFINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGHT AS PER ASME B1. 1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTAS: ECP-VST-G-GEN-FT-001 359/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CM1A03A-01 ECP-VST-G-GEN-FT-001 360/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 HOT DIP GALVANIZED AS PER ASTM A-123 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 INDUSTRIAL AIR UTA 150 272 INSTRUMENT AIR INA 200 260 CLARIFIED WATER CLW 300 230 POTABLE WATER PWA 400 200 500 170 600 140 650 125 700 110 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 5-oct-04 RF PIPING CLASS AH1A23A-01 ANSI RATING CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 700 110 750 95 800 80 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 361/761 PIPING CLASS CLASS: AH1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AH1A23A-01 1/2 2 800 THD BRONZE, GATE VALVE, ASTM B-62, ACCORDING TO MSS- SP-80, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, TESTS AS PER API 598, BRONZE TRIM, UNION BONNET, INSIDE SCREW AND RISING STEM, SOLID WEDGE, INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AH1A23A-01 3 12 125 RF CAST IRON, GATE VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, UNION BONNET, INSIDE SCREW AND RISING STEM, SOLID WEDGE, RENEWABLE RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 CHECK VALVE AH1A23A-01 1/2 2 800 THD BRONZE, CHECK VALVE - Y PATTERN, SWING TYPE, ASTM B-62, ACCORDING TO MSS-SP-80, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, TESTS AS PER API 598, BRONZE TRIM, SCREWED CAP, INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, . 4 CHECK VALVE AH1A23A-01 3 12 125 RF CAST IRON, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A- 126 GR. B, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, SCREWED CAP, RENEWABLE RINGS GRAPHITE STEM PACKING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 RENEWABLE RINGS, GRAPHITE STEM PACKING 5 GLOBE VALVE AH1A23A-01 1/2 2 800 THD BRONZE, GLOBE VALVE, ASTM B-62, ACCORDING TO MSS-SP-80, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, TESTS AS PER API 598, BRONZE TRIM, UNION BONNET, INSIDE SCREW AND RISING STEM, SWIVEL DISC PLUG TYPE, INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 6 GLOBE VALVE AH1A23A-01 3 12 125 RF CAST IRON, GLOBE VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, INSIDE SCREW AND RISING STEM, RENEWABLE RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 BUTTERFLY VALVE AH1A23A-01 3 6 150 RF DUCTILE IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-395, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM,, BRONZE DISC, TEFLON SEAT, LEVER OPERATOR 8 BUTTERFLY VALVE AH1A23A-01 8 12 150 RF DUCTILE IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-395, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM,, BRONZE DISC, TEFLON SEAT, GEAR OPERATOR 9 PIPE AH1A23A-01 1/2 1 1/2 THD 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, THREADED AND COUPLED, AS PER ASME B1.20.1, NPT 10 PIPE AH1A23A-01 2 2 BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 11 PIPE AH1A23A-01 3 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 362/761 PIPING CLASS CLASS: AH1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 12 PIPE AH1A23A-01 10 12 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 13 ELBOW 45 DEGREES AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 14 ELBOW 45 DEGREES AH1A23A-01 2 2 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES AH1A23A-01 3 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 45 DEGREES AH1A23A-01 10 12 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 18 ELBOW 90 DEGREES AH1A23A-01 2 2 BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 90 DEGREES AH1A23A-01 3 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 20 ELBOW 90 DEGREES AH1A23A-01 10 12 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25ENDS AS PER ASME B16.25 21 CONCENTRIC REDUCER AH1A23A-01 1/2 2 80 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, HOT-DIP GALVANIZED AS PER ASTM A-123, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16 2522 CONCENTRIC REDUCER AH1A23A-01 3 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 23 CONCENTRIC REDUCER AH1A23A-01 10 12 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 24 ECCENTRIC REDUCER AH1A23A-01 1/2 2 80 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, HOT-DIP GALVANIZED AS PER ASTM A-123, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16 2525 ECCENTRIC REDUCER AH1A23A-01 3 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 26 ECCENTRIC REDUCER AH1A23A-01 10 12 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 27 CAP AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A- 123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 CAP AH1A23A-01 2 2 BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 29 CAP AH1A23A-01 3 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 30 CAP AH1A23A-01 10 12 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 363/761 PIPING CLASS CLASS: AH1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 31 STRAIGHT AND REDUCER TEE AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 32 STRAIGHT AND REDUCER TEE AH1A23A-01 2 2 BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT- DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 33 STRAIGHT AND REDUCER TEE AH1A23A-01 3 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT- DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 34 STRAIGHT AND REDUCER TEE AH1A23A-01 10 12 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT- DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 35 OLET AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 36 OLET AH1A23A-01 2 2 BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 37 OLET AH1A23A-01 3 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 38 OLET AH1A23A-01 10 12 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 39 PLUG AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, MALE THREADED ENDS AS PER ASME B1.20.1, NPTENDS AS PER ASME B1.20.1, NPT 40 COUPLING AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 41 NIPPLE AH1A23A-01 1/2 1 1/2 THD 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 42 FLANGE AH1A23A-01 1/2 1 1/2 150 RF 80 CARBON STEEL, THREADED FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE FLANGED END 43 FLANGE AH1A23A-01 2 2 150 RF 80 CARBON STEEL, SLIP ON FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE FLANGED END 44 FLANGE AH1A23A-01 3 8 150 RF 40 CARBON STEEL, SLIP ON FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE FLANGED END 45 FLANGE AH1A23A-01 10 12 150 RF 20 CARBON STEEL, SLIP ON FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE FLANGED END 46 BLIND FLANGE AH1A23A-01 2 12 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE FLANGED END 47 FIGURE 8 AH1A23A-01 2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE ENDS 48 DRIP RINGS AH1A23A-01 2 12 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE ENDS 49 GASKET AH1A23A-01 1/2 12 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 50 BOLTING AH1A23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18 2 2NOTES: ECP-VST-G-GEN-FT-001 364/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AH1A23A-01 ECP-VST-G-GEN-FT-001 365/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL To: 285 ASTM A-105 / ASTM A-350 GR. LF2 / ASTM A-350 GR. LF6 Cl. 1 DESIGN TEMPERATURE (°F): From: -20 HOT DIP GALVANIZED AS PER ASTM A-123 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 INDUSTRIAL AIR UTA 150 272 INSTRUMENT AIR INA 200 260 POTABLE WATER PWA 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 RF AH1A23A-01 ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PIPING CLASS 850 65 900 50 950 35 1000 20 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F 150 300 600 900 1500 -20 to 100 285 740 1480 2220 3705 150 272 707 1415 2122 3540 200 260 675 1350 2025 3375 300 230 655 1315 1970 3280 400 200 635 1270 1900 3170 500 170 600 1200 1795 2995 600 140 550 1095 1640 2735 650 125 535 1075 1610 2685 700 110 535 1065 1600 2665 750 95 505 1010 1510 2520 800 80 410 825 1235 2060 850 65 270 535 805 1340 900 50 170 345 515 860 950 35 105 205 310 515 1000 20 50 105 155 260 ECP-VST-G-GEN-FT-001 366/761 PIPING CLASS CLASS: AH1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE AH1A23A-01 1/2 2 800 THD BRONZE, GATE VALVE, ASTM B-62, ACCORDING TO MSS- SP-80, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, TESTS AS PER API 598, BRONZE TRIM, UNION BONNET, INSIDE SCREW AND RISING STEM, SOLID WEDGE, INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AH1A23A-01 3 12 125 RF CAST IRON, GATE VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, UNION BONNET, INSIDE SCREW AND RISING STEM, SOLID WEDGE, RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 3 CHECK VALVE AH1A23A-01 1/2 2 800 THD BRONZE, CHECK VALVE - Y PATTERN, SWING TYPE, ASTM B-62, ACCORDING TO MSS-SP-80, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, TESTS AS PER API 598, BRONZE TRIM, SCREWED CAP, INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, . 4 CHECK VALVE AH1A23A-01 3 12 125 RF CAST IRON, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, SCREWED CAP, RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, . PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 5 GLOBE VALVE AH1A23A-01 1/2 2 800 THD BRONZE, GLOBE VALVE, ASTM B-62, ACCORDING TO MSS- SP-80, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, TESTS AS PER API 598, BRONZE TRIM, UNION BONNET, INSIDE SCREW AND RISING STEM, SWIVEL DISC PLUG TYPE, INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 6 GLOBE VALVE AH1A23A-01 3 12 125 RF CAST IRON, GLOBE VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, INSIDE SCREW AND RISING STEM, RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 7 BUTTERFLY VALVE AH1A23A-01 3 6 150 RF DUCTILE IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-395, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM,, BRONZE DISC, TEFLON SEAT, LEVER OPERATOR 8 BUTTERFLY VALVE AH1A23A-01 8 12 150 RF DUCTILE IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-395, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BRONZE TRIM,, BRONZE DISC, TEFLON SEAT, GEAR OPERATOR 9 PIPE AH1A23A-01 1/2 1 1/2 THD 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, THREADED AND COUPLED, AS PER ASME B1.20.1, NPT 10 PIPE AH1A23A-01 2 2 BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 11 PIPE AH1A23A-01 3 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 12 PIPE AH1A23A-01 10 12 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 367/761 PIPING CLASS CLASS: AH1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 13 ELBOW 45 DEGREES AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 14 ELBOW 45 DEGREES AH1A23A-01 2 2 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES AH1A23A-01 3 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 45 DEGREES AH1A23A-01 10 12 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 18 ELBOW 90 DEGREES AH1A23A-01 2 2 BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 90 DEGREES AH1A23A-01 3 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 20 ELBOW 90 DEGREES AH1A23A-01 10 12 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 21 CONCENTRIC REDUCER AH1A23A-01 1/2 2 80 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, HOT-DIP GALVANIZED AS PER ASTM A-123, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16 25 22 CONCENTRIC REDUCER AH1A23A-01 3 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB DIMENSIONS AS PER ASME B16 9 HOT DIPWPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 23 CONCENTRIC REDUCER AH1A23A-01 10 12 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 24 ECCENTRIC REDUCER AH1A23A-01 1/2 2 80 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, HOT-DIP GALVANIZED AS PER ASTM A-123, PLAIN END, OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16 25 25 ECCENTRIC REDUCER AH1A23A-01 3 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 26 ECCENTRIC REDUCER AH1A23A-01 10 12 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 27 CAP AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 28 CAP AH1A23A-01 2 2 BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A- 123, BEVELED ENDS AS PER ASME B16.25 29 CAP AH1A23A-01 3 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A- 123, BEVELED ENDS AS PER ASME B16.25 30 CAP AH1A23A-01 10 12 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A- 123, BEVELED ENDS AS PER ASME B16.25 31 STRAIGHT AND REDUCER TEE AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 32 STRAIGHT AND REDUCER TEE AH1A23A-01 2 2 BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 33 STRAIGHT AND REDUCER TEE AH1A23A-01 3 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 34 STRAIGHT AND REDUCER TEE AH1A23A-01 10 12 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 368/761 PIPING CLASS CLASS: AH1A23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION NOTES 35 OLET AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, HOT-DIP GALVANIZED AS PER ASTM A- 123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 36 OLET AH1A23A-01 2 2 BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 37 OLET AH1A23A-01 3 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 38 OLET AH1A23A-01 10 12 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, HOT-DIP GALVANIZED AS PER ASTM A-123, BEVELED ENDS AS PER ASME B16.25 39 PLUG AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A-123, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 40 COUPLING AH1A23A-01 1/2 1 1/2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, HOT-DIP GALVANIZED AS PER ASTM A- 123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 41 NIPPLE AH1A23A-01 1/2 1 1/2 THD 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, HOT-DIP GALVANIZED AS PER ASTM A-123, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 42 FLANGE AH1A23A-01 1/2 1 1/2 150 RF 80 CARBON STEEL, THREADED FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE ENDS 43 FLANGE AH1A23A-01 2 2 150 RF 80 CARBON STEEL, SLIP ON FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE ENDS 44 FLANGE AH1A23A-01 3 8 150 RF 40 CARBON STEEL, SLIP ON FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16 5 HOT DIP GALVANIZEDDIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE ENDS 45 FLANGE AH1A23A-01 10 12 150 RF 20 CARBON STEEL, SLIP ON FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE ENDS 46 BLIND FLANGE AH1A23A-01 2 12 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A- 123, RAISED FACE ENDS 47 FIGURE 8 AH1A23A-01 2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE ENDS 48 DRIP RINGS AH1A23A-01 2 12 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, HOT-DIP GALVANIZED AS PER ASTM A-123, RAISED FACE ENDS 49 GASKET AH1A23A-01 1/2 12 150 RF SOFT IRON, GASKET, THICKNESS 1/16 INCHES, KLINGERSIL C4400 OR GARLOCK BLUE GARD 3000 OR EQUIVALENT, DIMENSIONS AS PER ASME B16.21 FOR ASME B16.5 FLANGES, SUITABLE FOR FLAT FACE FLANGES ASME B16.5 50 BOLTING AH1A23A-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 369/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES W WELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: AH1A23A-01 ECP-VST-G-GEN-FT-001 370/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ACERO INOXIDABLE SX To: 290 DESIGN TEMPERATURE (°F): From: -20 To: 275 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 290 STRONG SULPHURIC ACID ACDC 150 275 200 260 300 230 400 200 450 185 500 170 600 140 650 125 700 110 750 95 FLANGE FINISH DATE: 5-oct-04 RF ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/100" PIPING CLASS CL1A03A-01 750 95 800 80 NOTES: 1.- SPECIAL MATERIAL. ASSUMED DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 3.1 2.- DESIGN CALCULATIONS AS PER ASME B31.3. 150 300 600 900 1500 -20 to 100 290 750 1500 2250 3750 150 275 735 1470 2205 3675 200 260 720 1440 2160 3600 300 230 715 1425 2140 3565 400 200 675 1345 2020 3365 450 185 665 1327 1992 3320 500 170 655 1310 1965 3275 600 140 605 1210 1815 3025 650 125 590 1175 1765 2940 700 110 570 1135 1705 2840 750 95 530 1065 1595 2660 800 80 510 1015 1525 2540 850 900 950 1000 ECP-VST-G-GEN-FT-001 371/761 PIPING CLASS CLASS: CL1A03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE CL1A03A-01 1/2 2 150 RF ALLOY 20 STEEL, GATE VALVE, ASTM A-351 GR. CN7M, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, HARDFACE SEATS, HANDWHEEL 2 GATE VALVE CL1A03A-01 2 12 150 RF ALLOY 20 STEEL, GATE VALVE, ASTM A-351 GR. CN7M, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, HARDFACE SEATS, HANDWHEEL 3 GATE VALVE CL1A03A-01 14 24 150 RF ALLOY 20 STEEL, GATE VALVE, ASTM A-351 GR. CN7M, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, HARDFACE SEATS, GEAR OPERATOR 4 CHECK VALVE CL1A03A-01 1/2 12 150 RF ALLOY 20 STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CN7M, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API Elaborado 25/03/2011 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 598, ALLOY 20 TRIM, HARDFACE SEATS, 5 GLOBE VALVE CL1A03A-01 1/2 12 150 RF ALLOY 20 STEEL, GLOBE VALVE, ASTM A-351 GR. CN7M, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, ALLOY 20 TRIM, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, HARDFACE SEATS, HANDWHEEL 6 PIPE CL1A03A-01 1/2 1 1/2 PE 40S STAINLESS STEEL, WELDED PIPE, ASTM B-464 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 7 PIPE CL1A03A-01 2 2 BE 2,3 mm THK STAINLESS STEEL, WELDED PIPE, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 8 PIPE CL1A03A-01 3 3 BE 3 mm THK STAINLESS STEEL, WELDED PIPE, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 9 PIPE CL1A03A-01 4 14 BE 4 mm THK STAINLESS STEEL, WELDED PIPE, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 10 PIPE CL1A03A-01 16 24 BE 6 mm THK STAINLESS STEEL, WELDED PIPE, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 11 ELBOW 45 DEGREES CL1A03A-01 1/2 1 1/2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 12 ELBOW 45 DEGREES CL1A03A-01 2 2 BW 2,3 mm THK STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 372/761 PIPING CLASS CLASS: CL1A03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 13 ELBOW 45 DEGREES CL1A03A-01 3 3 BW 3 mm THK STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 45 DEGREES CL1A03A-01 4 14 BW 4 mm THK STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 ELBOW 45 DEGREES CL1A03A-01 16 24 BW 6 mm THK STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 16 ELBOW 90 DEGREES CL1A03A-01 1/2 1 1/2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 17 ELBOW 90 DEGREES CL1A03A-01 2 2 BW 2,3 mm THK STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 18 ELBOW 90 DEGREES CL1A03A-01 3 3 BW 3 mm THK STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 19 ELBOW 90 DEGREES CL1A03A-01 4 14 BW 4 mm THK STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 ELBOW 90 DEGREES CL1A03A-01 16 24 BW 6 mm THK STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 CONCENTRIC REDUCER CL1A03A-01 1/2 2 40S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER MSS-SP-95, ENDS, AS PER ASME B16.25 / B16.11 / B1.20.1 22 CONCENTRIC REDUCER CL1A03A-01 3 24 BW STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 23 ECCENTRIC REDUCER CL1A03A-01 1/2 2 40S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM B-366 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER MSS-SP-95, ENDS, AS PER ASME B16.25 / B16.11 / B1.20.1 24 ECCENTRIC REDUCER CL1A03A-01 3 24 BW STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 CAP CL1A03A-01 1/2 1 1/2 3000 THD STAINLESS STEEL, CAP, ASTM B-462 Gr. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 26 CAP CL1A03A-01 1/2 1 1/2 3000 SW STAINLESS STEEL, CAP, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 27 CAP CL1A03A-01 2 2 BW 2,3 mm THK STAINLESS STEEL, CAP, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 CAP CL1A03A-01 3 3 BW 3 mm THK STAINLESS STEEL, CAP, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 CAP CL1A03A-01 4 14 BW 4 mm THK STAINLESS STEEL, CAP, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 CAP CL1A03A-01 16 24 BW 6 mm THK STAINLESS STEEL, CAP, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 STRAIGHT AND REDUCER TEE CL1A03A-01 1/2 1 1/2 3000 SW STAINLESS STEEL, STRAIGHT TEE, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 32 STRAIGHT AND REDUCER TEE CL1A03A-01 2 2 BW 2,3 mm THK STAINLESS STEEL, STRAIGHT TEE, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 33 STRAIGHT AND REDUCER TEE CL1A03A-01 3 3 BW 3 mm THK STAINLESS STEEL, STRAIGHT TEE, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 373/761 PIPING CLASS CLASS: CL1A03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 34 STRAIGHT AND REDUCER TEE CL1A03A-01 4 14 BW 4 mm THK STAINLESS STEEL, STRAIGHT TEE, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 35 STRAIGHT AND REDUCER TEE CL1A03A-01 16 24 BW 6 mm THK STAINLESS STEEL, STRAIGHT TEE, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 36 STUB END CL1A03A-01 2 2 BW 2,3 mm THK STAINLESS STEEL, STUB END, TYPE SHORT PATTERN, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9 / MSS-SP-43, BEVELED ENDS AS PER ASME B16.25 37 STUB END CL1A03A-01 3 3 BW 3 mm THK STAINLESS STEEL, STUB END, TYPE SHORT PATTERN, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9 / MSS-SP-43, BEVELED ENDS AS PER ASME B16.25 38 STUB END CL1A03A-01 4 14 BW 4 mm THK STAINLESS STEEL, STUB END, TYPE SHORT PATTERN, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9 / MSS-SP-43, BEVELED ENDS AS PER ASME B16.25 39 STUB END CL1A03A-01 16 24 BW 6 mm THK STAINLESS STEEL, STUB END, TYPE SHORT PATTERN, ASTM A-403 SX (ALLOY), DIMENSIONS AS PER ASME B16.9 / MSS-SP-43, BEVELED ENDS AS PER ASME B16.25 40 PLUG CL1A03A-01 1/2 1 1/2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM B- 462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 41 COUPLING CL1A03A-01 1/2 2 3000 THD STAINLESS STEEL, COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 42 COUPLING CL1A03A-01 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 43 HALF COUPLING CL1A03A-01 1/2 2 3000 THD STAINLESS STEEL, HALF COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 44 HALF COUPLING CL1A03A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 45 REDUCER COUPLING CL1A03A-01 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 46 NIPPLE CL1A03A-01 1/2 2 THD 40S STAINLESS STEEL, NIPPLE, WELDED PIPE, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 47 NIPPLE CL1A03A-01 1/2 2 PE 40S STAINLESS STEEL, NIPPLE, WELDED PIPE, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 48 FLANGE CL1A03A-01 1/2 1 1/2 150 RF 40S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM B- 462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 49 FLANGE CL1A03A-01 2 2 150 RF 2,3 mm THK STAINLESS STEEL, LAP JOINT, WITH EPOXY COATING, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 50 FLANGE CL1A03A-01 3 3 150 RF 3 mm THK STAINLESS STEEL, LAP JOINT, WITH EPOXY COATING, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 51 FLANGE CL1A03A-01 4 14 150 RF 4 mm THK STAINLESS STEEL, LAP JOINT, WITH EPOXY COATING, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 52 FLANGE CL1A03A-01 16 24 150 RF 6 mm THK STAINLESS STEEL, LAP JOINT, WITH EPOXY COATING, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 374/761 PIPING CLASS CLASS: CL1A03A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 53 BLIND FLANGE CL1A03A-01 1/2 24 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 54 ORIFICE FLANGE CL1A03A-01 2 2 300 RF 2,3 mm THK ALLOY 20 STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM B-462 GR. UNS N08020 (ALLOY 20). 55 ORIFICE FLANGE CL1A03A-01 3 3 300 RF 3 mm THK ALLOY 20 STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM B-462 GR. UNS N08020 (ALLOY 20). 56 ORIFICE FLANGE CL1A03A-01 4 14 300 RF 4 mm THK ALLOY 20 STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM B-462 GR. UNS N08020 (ALLOY 20). 57 ORIFICE FLANGE CL1A03A-01 16 24 300 RF 6 mm THK ALLOY 20 STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM B-462 GR. UNS N08020 (ALLOY 20), DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM B-462 GR. UNS N08020 (ALLOY 20). 58 BLIND PLATE CL1A03A-01 14 24 150 RF STAINLESS STEEL, BLIND PLATE, ASTM A-312 SX (ALLOY),58 C 03 0 50 S SS S , , S 3 S ( O ), DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 59 SPACER RING CL1A03A-01 14 24 150 RF STAINLESS STEEL, SPACER RING, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 60 FIGURE 8 CL1A03A-01 1/2 12 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 61 DRIP RINGS CL1A03A-01 2 12 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-312 SX (ALLOY), DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 62 GASKET CL1A03A-01 1/2 24 150 RF ALLOY 20 STEEL, GASKET, FLAT RING, THICKNESS 1/8" INCHES, GARLOCK STYLE GYLON 3500 OR EQUIVALENT, DIMENSIONS AS PER ASME B16.21, 63 BOLTING CL1A03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMIFINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGHT AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 64 BOLTING CL1A03A-01 STAINLESS STEEL, STUD BOLT WITH TWO SEMIFINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGHT AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTAS: ECP-VST-G-GEN-FT-001 375/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 B R R R R R R T I 6 B B B R R R R R T Z 4 B B B B B B R R R T E 3 B B B B B B B B B B T 2 B B B B B B B B B B R T 1½ B B B B B B B B B B B B T 1 B B B B B B B B B B B B B T ¾ B B B B B B B B B B B B B B T ½ B B B B B B B B B B B B B B B T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES R RELDOLET B REDUCER OR NORMAL TEE AND REDUCER R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: CL1A03A-01 ECP-VST-G-GEN-FT-001 376/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 FRP, FIBERGLASS REINFORCED PLASTIC To: table DESIGN TEMPERATURE (°F): From: 0 To: 200 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) 0" (N/A) POR: Adolfo Triviño / Jaime Amador PIPING CLASS DA1C03A-01 ANSI RATING FLANGE FINISH DATE: 5-oct-04 FF PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE 0 to 100 285 SULPHURIC ACID DILUID (2& TO 30%) DSA 150 272 200 260 NOTES: 1.- SPECIAL MATERIAL. ASSUMED DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1. 2.- DESIGN LIMITS ACCORDING TO ASTM D-2996 & D-2997. MATERIALS ARE ACCORDING WITH ASME B31.3, CAP. VII ECP-VST-G-GEN-FT-001 377/761 PIPING CLASS CLASS DA1C03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 1 DIAPHRAGM VALVE DA1C03A-01 1 10 125 FF CAST IRON, DIAPHRAGM VALVE, WEIR TYPE, CAST IRON BODY POLYPROPYLENE LINED, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, BOLTED BONNET, TEFLON DIAPHRAGM, HANDWHEEL 2 BALL VALVE DA1C03A-01 1 6 125 FF CAST IRON, BALL VALVE, FLOATING BALL, FULL PORT, CAST IRON BODY & BALL, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, PEFFLUORETHYLENE LINED & PEFFLUORETHYLENE ENCAPSULATED BALL, BOLTED BONNET, HANDWHEEL 3 BALL VALVE DA1C03A-01 1 6 150 FF GRAPHITE FIBER REINFORCED, BALL VALVE, FLOATING BALL, FULL PORT, GRAPHITE FIBER - REINFORCED VINYL ESTER BODY & BALL, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, , HANDWHEEL 4 PLUG VALVE DA1C03A-01 1 3 125 FF CAST IRON, PLUG VALVE, CAST IRON BODY, TEFLON (PTFE) LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CAST IRON PLUG, TEFLON (PTFE) ENCAPSULATED, HANDWHEEL 5 PLUG VALVE DA1C03A-01 4 4 125 FF CAST IRON, PLUG VALVE, CAST IRON BODY, TEFLON (PTFE) LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CAST IRON PLUG, TEFLON (PTFE) ENCAPSULATED, HANDWHEEL 6 PLUG VALVE DA1C03A-01 6 8 125 FF CAST IRON, PLUG VALVE, CAST IRON BODY, TEFLON (PTFE) LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CAST IRON PLUG, TEFLON (PTFE) ENCAPSULATED, GEAR OPERATOR PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 ECP-VST-G-GEN-FT-001 378/761 PIPING CLASS CLASS DA1C03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 7 BUTTERFLY VALVE DA1C03A-01 3 10 125 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , CAST IRON BODY, TEFLON (PTFE) LINED, ACCORDING TO API 609, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, , PTFE LINED DISC, TEFLON SEAT, GEAR OPERATOR 8 BUTTERFLY VALVE DA1C03A-01 3 6 150 FF GRAPHITE FIBER REINFORCED, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , GRAPHITE FIBER - REINFORCED VINYL ESTER BODY, ACCORDING TO API 609, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, , TEFLON SEAT, HANDWHEEL 9 BUTTERFLY VALVE DA1C03A-01 8 10 150 FF GRAPHITE FIBER REINFORCED, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , GRAPHITE FIBER - REINFORCED VINYL ESTER BODY, ACCORDING TO API 609, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, , TEFLON SEAT, GEAR OPERATOR 10 CHECK VALVE DA1C03A-01 1 8 150 FF CAST IRON, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, CAST IRON BODY, POLYPROPYLENE LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, POLYPROPYLENE ENCAPSULATED LIFT CHECK, BOLTED COVER, . 11 PIPE DA1C03A-01 1 6 6,35 mm THK FRP, PIPE, FIBERGLASS REINFORCED PLASTIC, ASTM D- 2996 OR ASTM D-2997, SPIGOT x SPIGOT TYPE 12 PIPE DA1C03A-01 8 10 9,94 mm THK FRP, PIPE, FIBERGLASS REINFORCED PLASTIC, ASTM D- 2996 OR ASTM D-2997, SPIGOT x SPIGOT TYPE 13 ELBOW 45 DEGREES DA1C03A-01 1 6 6,35 mm THK FRP, ELBOW 45 DEGREES, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 14 ELBOW 45 DEGREES DA1C03A-01 8 10 9,94 mm THK FRP, ELBOW 45 DEGREES, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 15 ELBOW 90 DEGREES DA1C03A-01 1 6 6,35 mm THK FRP, ELBOW 90 DEGREES, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 16 ELBOW 90 DEGREES DA1C03A-01 8 10 9,94 mm THK FRP, ELBOW 90 DEGREES, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 17 CONCENTRIC REDUCER DA1C03A-01 1 6 6,35 mm THK FRP, CONCENTRIC REDUCER, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 18 CONCENTRIC REDUCER DA1C03A-01 8 10 9,94 mm THK FRP, CONCENTRIC REDUCER, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 19 ECCENTRIC REDUCER DA1C03A-01 1 6 6,35 mm THK FRP, ECCENTRIC REDUCER, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 20 ECCENTRIC REDUCER DA1C03A-01 8 10 9,94 mm THK FRP, ECCENTRIC REDUCER, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 21 STRAIGHT AND REDUCER TEE DA1C03A-01 1 6 6,35 mm THK FRP, STRAIGHT AND REDUCER TEE, FIBERGLASS REINFORCED PLASTIC, BELL x BELL TYPE 22 STRAIGHT AND REDUCER TEE DA1C03A-01 8 10 9,94 mm THK FRP, STRAIGHT AND REDUCER TEE, FIBERGLASS REINFORCED PLASTIC BELL BELL TYPETHK REINFORCED PLASTIC, BELL x BELL TYPE 23 FLANGE DA1C03A-01 1 6 150 FF 6,35 mm THK FRP, STUB FLANGE, FIBERGLASS REINFORCED PLASTIC, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 24 FLANGE DA1C03A-01 8 10 150 FF 9,94 mm THK FRP, STUB FLANGE, FIBERGLASS REINFORCED PLASTIC, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 25 BLIND FLANGE DA1C03A-01 1 10 150 FF FRP, BLIND FLANGE, FIBERGLASS REINFORCED PLASTIC, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 26 GASKET DA1C03A-01 1 10 150 FF BUTYL, GASKET, FULL FACE, THICKNESS 1/8" INCHES, BUTYL RUBBER MATERIAL, DIMENSIONS FOR FLANGES B16.5, . 27 BOLTING DA1C03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMIFINISHED HEAVY TYPE HEXAGONAL NUTS AND TWO STAINLESS STEEL WASHERS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGHT AS PER ASME B1. 1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTAS: ECP-VST-G-GEN-FT-001 379/761 B 24 R 20 A 18 N 16 C 14 H 12 10 BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 S 8 T I 6 R T Z 4 R R T E 3 R R R T 2 R R R R T 1½ R R R R R T 1 R R R R R R T ¾ R R R R R R R T ½ R R R R R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES R RELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: DA1C03A-01 N/A ECP-VST-G-GEN-FT-001 380/761 Elaborado 25/03/2011 CLASS SCH 80 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CPVC, CHLORINATED POLYVINIL CHLORIDE To: table DESIGN TEMPERATURE (°F): From: 73 To: 180 DESIGN LIMITS Class Temperature SCH 40 SCH 80 SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) 1/2" 850 ACID SEWER, VENTS AND DRAINS OF STRONG SULPHURIC ACID ASW 3/4" 690 CHEMICALS QUI 1" 630 1 1/2" 470 2" 400 2 1/2" 420 3" 370 FLANGE FINISH DATE: 5-oct-04 FF ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 0" (N/A) PIPING CLASS DB1C03A-01 4" 320 6" 280 8" 250 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASTM F-441. MATERIALS ARE ACCORDING WITH ASME B31.3, CAP. VII 2.- TEMPERATURE RATING IS BASED IN ASTM F-441. "SCH 40" "SCH 80" 600 900 1500 1/2" 600 850 3/4" 480 690 1" 450 630 1 1/2" 330 470 2" 280 400 2 1/2" 300 420 3" 260 370 4" 220 320 6" 180 280 8" 160 250 10" 140 230 12" 130 230 ECP-VST-G-GEN-FT-001 381/761 PIPING CLASS CLASS: DB1C03A Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE DB1C03A-01 1/2 2 150 FF CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, 316 SS TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, PTFE STEM PACKING, HANDWHEEL 2 GATE VALVE DB1C03A-01 3 4 150 FF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, 316 SS TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, PTFE STEM PACKING, HANDWHEEL 3 PLUG VALVE DB1C03A-01 1/2 3 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, 316 SS TRIM, HANDWHEEL 4 PLUG VALVE DB1C03A-01 4 4 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S, G S S 6 5, CO S UC O S PER ASME B16.34, TEST AS PER API 598, 316 SS TRIM, HANDWHEEL 5 PLUG VALVE DB1C03A-01 6 8 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, 316 SS TRIM, GEAR OPERATOR 6 BUTTERFLY VALVE DB1C03A-01 4 6 125 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-126 GR. B WITH PTFE, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, TESTS AS PER API 598, , PTFE LINED DISC, PTFE SEATS, HANDWHEEL 7 BUTTERFLY VALVE DB1C03A-01 8 8 125 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-126 GR. B WITH PTFE, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, TESTS AS PER API 598, , PTFE LINED DISC, PTFE SEATS, GEAR OPERATOR ECP-VST-G-GEN-FT-001 382/761 PIPING CLASS CLASS: DB1C03A Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION NOTES 8 PIPE DB1C03A-01 1/2 8 80 CPVC, PIPE, CHLORINATED POLYVINIL CHLORIDE, ASTM F-441, PLAIN ENDS 9 ELBOW 45 DEGREES DB1C03A-01 1/2 6 80 CPVC, ELBOW 45 DEGREES, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F- 10 ELBOW 90 DEGREES DB1C03A-01 1/2 6 80 CPVC, ELBOW 90 DEGREES, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F- 11 CONCENTRIC REDUCER DB1C03A-01 1/2 8 80 CPVC, CONCENTRIC REDUCER, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS 12 ECCENTRIC REDUCER DB1C03A-01 1/2 8 80 CPVC, ECCENTRIC REDUCER, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F- 13 STRAIGHT AND REDUCER TEE DB1C03A-01 1/2 8 80 CPVC, STRAIGHT AND REDUCER TEE, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F-439 14 COUPLING DB1C03A-01 1/2 8 80 CPVC, COUPLING, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F-439 15 REDUCER BUSHING DB1C03A-01 1/2 8 80 CPVC, REDUCER BUSHING, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SPIGOT x FEMALE THREADED (NPT) 16 FEMALE ADAPTER DB1C03A-01 1/2 8 80 CPVC, FEMALE ADAPTER, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, FEMALE THREADED (NPT) x FEMALE (SOCKET) 17 MALE ADAPTER DB1C03A-01 1/2 8 80 CPVC, MALE ADAPTER, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, MALE THREADED (NPT) x FEMALE (SOCKET) 18 CAP DB1C03A-01 1/2 6 80 CPVC, CAP, CHLORINATED POLYVINIL CHLORIDE, ASTM F- 439, SOCKET ENDS AS PER ASTM F-439 19 PLUG DB1C03A-01 1/2 6 80 CPVC, PLUG, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, MALE THREADED (NPT) 20 FLANGE DB1C03A-01 1/2 8 150 FF 80 CPVC, SOCKET FLANGE, CHLORINATED POLYVINIL CHLORIDE, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 21 BLIND FLANGE DB1C03A-01 1/2 8 150 FF CPVC, BLIND FLANGE, CHLORINATED POLYVINIL CHLORIDE, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 22 GASKET DB1C03A-01 1/2 8 150 FF BUTYL, GASKET, FULL FACE, THICKNESS 1/8" INCHES, BUTYL RUBBER MATERIAL, DIMENSIONS FOR FLANGES B16.5, 23 BOLTING DB1C03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMIFINISHED HEAVY TYPE HEXAGONAL NUTS AND TWO STAINLESS STEEL WASHERS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGHT AS PER ASME B1. 1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTAS: ECP-VST-G-GEN-FT-001 383/761 B 24 R 20 A 18 N 16 C 14 H 12 10 BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 10 S 8 T I 6 B T Z 4 B R T E 3 B B R T 2 B B R R T 1½ B B B B R T 1 B B B B R R T ¾ B B B B R R R T ½ B B B B B B R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES R REDUCER TEE T NORMAL TEE (Full Size) B REDUCER OR NORMAL TEE AND REDUCER BUSHING APPLICABLE CLASS: DB1C03A-01 N/A ECP-VST-G-GEN-FT-001 384/761 Elaborado 25/03/2011 CLASS SCH 80 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 CPVC, CHLORINATED POLYVINIL CHLORIDE & LINED VALVES To: table DESIGN TEMPERATURE (°F): From: 73 To: 180 DESIGN LIMITS Class Temperature SCH 40 SCH 80 SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) 1/2" 850 SULPHURIC ACID DILUID "WEAK" (2% TO 30%, LOW PRESSURE) ACDA 3/4" 690 1" 630 1 1/2" 470 2" 400 2 1/2" 420 3" 370 4" 320 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 0" (N/A) PIPING CLASS DB1C03A-01 FLANGE FINISH DATE: 5-oct-04 FF PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATING 4 320 6" 280 8" 250 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASTM F-441. MATERIALS ARE ACCORDING WITH ASME B31.3, CAP. VII 2.- TEMPERATURE RATING IS BASED IN ASTM F-441. "SCH 40" "SCH 80" 600 900 1500 1/2" 600 850 3/4" 480 690 1" 450 630 1 1/2" 330 470 2" 280 400 2 1/2" 300 420 3" 260 370 4" 220 320 6" 180 280 8" 160 250 10" 140 230 12" 130 230 ECP-VST-G-GEN-FT-001 385/761 PIPING CLASS CLASS: DB1C03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 1 DIAPHRAGM VALVE DB1C03A-01 1/2 8 125 FF CAST IRON, DIAPHRAGM VALVE, WEIR TYPE, CAST IRON BODY POLYPROPYLENE LINED, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, BOLTED BONNET, TEFLON DIAPHRAGM, HANDWHEEL 2 BALL VALVE DB1C03A-01 1/2 2 150 SW CPVC, BALL VALVE, FLOATING BALL, CHLORINATED POLYVINIL CHLORIDE, DIMENSIONS AS PER ASME B16.10, SOCKET ENDS AS PER ASME B16.11, TESTS AS PER API 598, BOLTED BONNET, CPVC BALL, TEFLON SEAT, HANDWHEEL 3 BALL VALVE DB1C03A-01 1 6 125 FF CAST IRON, BALL VALVE, FLOATING BALL, ASTM A-126 GR. B WITH POLYPROPYLENE LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, BOLTED BONNET, PFA LINED AND TEFLON PFA (PERFLUOROALKOXY) ENCASULATED BALL, HANDWHEEL 4 PLUG VALVE DB1C03A-01 1 3 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B WITH PTFE LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, IRON PLUG WITH PTFE ENCASULATED, HANDWHEEL 5 PLUG VALVE DB1C03A-01 4 4 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B WITH PTFE LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, IRON PLUG WITH PTFE ENCASULATED, HANDWHEEL Elaborado 25/03/2011 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 6 PLUG VALVE DB1C03A-01 6 8 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B WITH PTFE LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, IRON PLUG WITH PTFE ENCASULATED, GEAR OPERATOR 7 BUTTERFLY VALVE DB1C03A-01 4 6 125 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-126 GR. B WITH PTFE, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, TESTS AS PER API 598, , PTFE LINED DISC, TEFLON SEAT, HANDWHEEL 8 BUTTERFLY VALVE DB1C03A-01 8 8 125 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-126 GR. B WITH PTFE, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, TESTS AS PER API 598, , PTFE LINED DISC, TEFLON SEAT, GEAR OPERATOR 9 CHECK VALVE DB1C03A-01 1/2 2 150 SW CPVC, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, CHLORINATED POLYVINIL CHLORIDE, DIMENSIONS AS PER ASME B16.10, SOCKET ENDS AS PER ASTM F-439, TESTS AS PER API 598, , CPVC BALL, VITON O-RING SEAT, 10 CHECK VALVE DB1C03A-01 1 8 125 FF CAST IRON, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-126 GR. B WITH POLYPROPYLENE LINED, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, TEST AS PER API 598, BRONZE TRIM, PTFE GASKET, SCREWED CAP, INTEGRAL SEAT RING, 11 PIPE DB1C03A-01 1/2 8 80 CPVC, PIPE, CHLORINATED POLYVINIL CHLORIDE, ASTM F- 441, PLAIN ENDS 12 ELBOW 45 DEGREES DB1C03A-01 1/2 6 80 CPVC, ELBOW 45 DEGREES, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F- 13 ELBOW 90 DEGREES DB1C03A-01 1/2 6 80 CPVC, ELBOW 90 DEGREES, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F- ECP-VST-G-GEN-FT-001 386/761 PIPING CLASS CLASS: DB1C03A-01 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 14 CONCENTRIC REDUCER DB1C03A-01 1/2 8 80 CPVC, CONCENTRIC REDUCER, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F- 15 ECCENTRIC REDUCER DB1C03A-01 1/2 8 80 CPVC, ECCENTRIC REDUCER, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F- 16 STRAIGHT AND REDUCER TEE DB1C03A-01 1/2 8 80 CPVC, STRAIGHT AND REDUCER TEE, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F-439 17 COUPLING DB1C03A-01 1/2 8 80 CPVC, COUPLING, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SOCKET ENDS AS PER ASTM F-439 18 REDUCER BUSHING DB1C03A-01 1/2 8 80 CPVC, REDUCER BUSHING, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, SPIGOT x FEMALE THREADED (NPT) 19 FEMALE ADAPTER DB1C03A-01 1/2 8 80 CPVC, FEMALE ADAPTER, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, FEMALE THREADED (NPT) x FEMALE (SOCKET) 20 MALE ADAPTER DB1C03A-01 1/2 8 80 CPVC, MALE ADAPTER, CHLORINATED POLYVINIL CHLORIDE, ASTM F-439, MALE THREADED (NPT) x FEMALE (SOCKET) 21 CAP DB1C03A-01 1/2 6 80 CPVC, CAP, CHLORINATED POLYVINIL CHLORIDE, ASTM F- 439, SOCKET ENDS AS PER ASTM F-439 22 PLUG DB1C03A-01 1/2 6 80 CPVC, PLUG, CHLORINATED POLYVINIL CHLORIDE, ASTM F- 439, MALE THREADED (NPT) 23 FLANGE DB1C03A-01 1/2 8 150 FF 80 CPVC, SOCKET FLANGE, CHLORINATED POLYVINIL CHLORIDE, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 24 BLIND FLANGE DB1C03A-01 1/2 8 150 FF CPVC, BLIND FLANGE, CHLORINATED POLYVINIL CHLORIDE, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 25 GASKET DB1C03A-01 1/2 8 150 FF BUTYL, GASKET, FULL FACE, THICKNESS 1/8" INCHES, BUTYL RUBBER MATERIAL, DIMENSIONS FOR FLANGES B16 526 BOLTING DB1C03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMIFINISHED HEAVY TYPE HEXAGONAL NUTS AND TWO STAINLESS STEEL WASHERS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGHT AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTAS:NOTAS: ECP-VST-G-GEN-FT-001 387/761 B 24 R 20 A 18 N 16 C 14 H 12 10 BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 T I 6 B T Z 4 B R T E 3 B B R T 2 B B R R T 1½ B B B B R T 1 B B B B R R T ¾ B B B B R R R T ½ B B B B B B R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES R REDUCER TEE T NORMAL TEE (Full Size) B REDUCER OR NORMAL TEE AND REDUCER BUSHING APPLICABLE CLASS: DB1C03A-01 N/A ECP-VST-G-GEN-FT-001 388/761 Elaborado 25/03/2011 CLASS SCH 80 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 PVC, POLY (VINIL CHLORIDE) To: table DESIGN TEMPERATURE (°F): From: 73 To: 100 DESIGN LIMITS Class Temperature SCH 40 SCH 80 SCH 120 SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) 1/2" 850 CHEMICALS QUI 3/4" 690 DEIONIZED WATER DIW 1" 630 1 1/2" 470 2" 400 2 1/2" 420 3" 370 4" 320 6" 280 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 0" (N/A) PIPING CLASS DC1C03A-01 FLANGE FINISH DATE: 5-oct-04 FF ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 6 80 8" 250 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASTM D-1785-99. MATERIALS ARE ACCORDING WITH ASME B31.3, CAP. VII "SCH 40" "SCH 80" "SCH 120" 1/2" 600 850 1010 3/4" 480 690 770 1" 450 630 720 1 1/2" 330 470 540 2" 280 400 470 2 1/2" 300 420 470 3" 260 370 440 4" 220 320 430 6" 180 280 370 8" 160 250 380 10" 140 230 370 12" 130 230 340 ECP-VST-G-GEN-FT-001 389/761 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE DC1C03A-01 1/2 2 150 FF CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, 316 SS TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, PTFE STEM PACKING, 2 GATE VALVE DC1C03A-01 3 4 150 FF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, 316 SS TRIM, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE FLEXIBLE WEDGE PTFE STEM PACKING PIPING CLASS CLASS: DC1C03A-01 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 YOKE, FLEXIBLE WEDGE, PTFE STEM PACKING, HANDWHEEL 3 PLUG VALVE DC1C03A-01 1/2 3 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, 316 SS TRIM, HANDWHEEL 4 PLUG VALVE DC1C03A-01 4 4 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, 316 SS TRIM, HANDWHEEL 5 PLUG VALVE DC1C03A-01 6 8 125 FF CAST IRON, PLUG VALVE, ASTM A-126 GR. B, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, 316 SS TRIM, GEAR OPERATOR ECP-VST-G-GEN-FT-001 390/761 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES PIPING CLASS CLASS: DC1C03A-01 6 BUTTERFLY VALVE DC1C03A-01 4 6 125 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-126 GR. B WITH PTFE, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, TESTS AS PER API 598, , PTFE LINED DISC, PTFE SEATS, HANDWHEEL 7 BUTTERFLY VALVE DC1C03A-01 8 8 125 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-126 GR. B WITH PTFE, ACCORDING TO API 609, WAFER ENDS, RATING AS PER ASME B16.5, TESTS AS PER API 598, , PTFE LINED DISC, PTFE SEATS, GEAR OPERATOR 8 PIPE DC1C03A-01 1/2 8 80 PVC, PIPE, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D 1785, PLAIN ENDS 9 ELBOW 45 DEGREES DC1C03A-01 1/2 6 80 PVC, ELBOW 45 DEGREES, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, SOCKET 10 ELBOW 90 DEGREES DC1C03A-01 1/2 6 80 PVC, ELBOW 90 DEGREES, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, SOCKET 11 CONCENTRIC REDUCER DC1C03A-01 1/2 8 80 PVC, CONCENTRIC REDUCER, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, SOCKET 12 ECCENTRIC REDUCER DC1C03A-01 1/2 8 80 PVC, ECCENTRIC REDUCER, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, SOCKET 13 STRAIGHT AND REDUCER TEE DC1C03A-01 1/2 8 80 PVC, STRAIGHT AND REDUCER TEE, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, SOCKET ENDS AS PER ASTM D 2467ENDS AS PER ASTM D-2467 14 COUPLING DC1C03A-01 1/2 8 80 PVC, COUPLING, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, SOCKET ENDS AS PER ASTM D- 2467 15 REDUCER BUSHING DC1C03A-01 1/2 8 80 PVC, REDUCER BUSHING, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, SPIGOT x FEMALE THREADED (NPT) ECP-VST-G-GEN-FT-001 391/761 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHE DULE COMPONENTS DESCRIPTION NOTES PIPING CLASS CLASS: DC1C03A-01 16 FEMALE ADAPTER DC1C03A-01 1/2 8 80 PVC, FEMALE ADAPTER, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, FEMALE THREADED (NPT) x FEMALE (SOCKET) 17 MALE ADAPTER DC1C03A-01 1/2 8 80 PVC, MALE ADAPTER, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, MALE THREADED (NPT) x FEMALE (SOCKET) 18 CAP DC1C03A-01 1/2 6 80 PVC, CAP, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, SOCKET ENDS AS PER ASTM D-2467 19 PLUG DC1C03A-01 1/2 6 80 PVC, PLUG, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), ASTM D-2467, MALE THREADED (NPT) AS PER ASTM D-2467 20 FLANGE DC1C03A-01 1/2 8 150 FF 80 PVC, SOCKET FLANGE, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 21 BLIND FLANGE DC1C03A-01 1/2 8 150 FF PVC, BLIND FLANGE, POLY (VINIL CHLORIDE) (PVC1120, PVC1220 OR PVC2120), DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 22 GASKET DC1C03A-01 1/2 8 150 FF BUTYL, GASKET, FULL FACE, THICKNESS 1/8" INCHES, BUTYL RUBBER MATERIAL, DIMENSIONS FOR FLANGES B16.5, 23 BOLTING DC1C03A-01 CARBON STEEL, STUD BOLT WITH TWO SEMIFINISHED HEAVY TYPE HEXAGONAL NUTS AND TWO STAINLESSHEAVY TYPE HEXAGONAL NUTS AND TWO STAINLESS STEEL WASHERS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGHT AS PER ASME B1. 1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTAS: ECP-VST-G-GEN-FT-001 392/761 B 24 R 20 A 18 N 16 C 14 H 12 10 BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 T I 6 B T Z 4 B R T E 3 B B R T 2 B B R R T 1½ B B B B R T 1 B B B B R R T ¾ B B B B R R R T ½ B B B B B B R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES R REDUCER TEE T NORMAL TEE (Full Size) B REDUCER OR NORMAL TEE AND REDUCER BUSHING APPLICABLE CLASS: DC1C03A-01 N/A ECP-VST-G-GEN-FT-001 393/761 Elaborado 25/03/2011 CLASS 150 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALUMINUM To: 275 DESIGN TEMPERATURE (°F): From: -20 To: 250 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 275 POLYETHYLENE PELLETS, PELLET COOLING WATER LAC 150 270 ETHYLENE ETI 200 265 250 260 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 FF PIPING CLASS DG1C23A-01 ANSI RATING G NOTES: 1. FLANGES SHALL MEET THE DIMENSIONAL AND TOLERANCE REQUIREMENTS OF ASME B16.5 (ASME B31.3 - APPENDIX L, ALUMINUM ALLOY PIPE FLANGES). 150 300 600 900 1500 -20 to 100 275 150 270 200 265 250 260 ECP-VST-G-GEN-FT-001 394/761 PIPING CLASS CLASS: DG1C23A-01 Item PIPING ELEMENT CLASS DN from DN to RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE DG1C23A-01 1/2 2 150 THD BRONZE, GATE VALVE, ASTM B-62, ACCORDING TO MSS-SP-80, FEMALE THREADED ENDS, AS PER ANSI B 1. 20. 1, NPT, TEST AS PER API 598, BRONZE TRIM, GARLOCK 3000 GASKET OR EQUIVALENT, UNION BONNET, SPLIT WEDGE DISC, INTEGRAL SEAT RING, TEFLON PACKING REPLACEABLE WHEN VALVE IS UNDER PRESSURE, HANDWHEEL 2 KNIFE GATE VALVE DG1C23A 01 3 12 150 FF CARBON STEEL, KNIFE GATE VALVE, WAFER PATTERN, ASTM A-216 GR. WCB, MSS SP 81 304 SS TRIM 304 SS KNIFE PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 DG1C23A-01 3 12 150 FF MSS-SP-81 , 304 SS TRIM, 304 SS KNIFE, METAL SEAT AND TEFLON PACKING, 3 BUTTERFLY VALVE DG1C23A-01 3 6 150 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-126 Gr. B, ACCORDING TO API 609, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, BRONZE TRIM, CAST IRON DISC, METAL TO METAL SEATING, LEVER OPERADOR ECP-VST-G-GEN-FT-001 395/761 PIPING CLASS CLASS: DG1C23A-01 Item PIPING ELEMENT CLASS DN from DN to RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 4 PIPE DG1C23A-01 1/2 2 THD 40 ALUMINUM, SEAMLESS PIPE, ASTM B-241 GR. 6063-T6, DIMENSIONS AS PER ASME B36.10, THREADED AS PER ANSI B 1. 20. 1, NPT AND COUPLED 5 PIPE DG1C23A-01 3 12 BE 40 ALUMINUM, SEAMLESS PIPE, ASTM B-241 GR. 6063-T6, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 6 ELBOW 45 DEGREES DG1C23A-01 1/2 2 150 THD ALUMINUM, ELBOW 45 DEGREES, ASTM B- 247 GR. 6061 T6, DIMENSIONS AS PER ASME B16.3, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 7 ELBOW 45 DEGREES DG1C23A-01 3 12 BW 40 ALUMINUM, ELBOW 45 DEGREES, LONG RADIUS, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 8 ELBOW 90 DEGREES DG1C23A-01 1/2 2 150 THD ALUMINUM, ELBOW 90 DEGREES, ASTM B- 247 GR. 6061 T6, DIMENSIONS AS PER ASME B16.3, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 9 ELBOW 90 DEGREES DG1C23A-01 3 12 BW 40 ALUMINUM, ELBOW 90 DEGREES, LONG RADIUS, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 10 CONCENTRIC REDUCER DG1C23A-01 3 12 BW 40 ALUMINUM, CONCENTRIC REDUCER, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 396/761 PIPING CLASS CLASS: DG1C23A-01 Item PIPING ELEMENT CLASS DN from DN to RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 11 ECCENTRIC REDUCER DG1C23A-01 3 12 BW 40 ALUMINUM, ECCENTRIC REDUCER, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 12 REDUCER COUPLING DG1C23A-01 1/2 2 150 THD ALUMINUM, REDUCER COUPLING, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER ASME B16.3, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 13 CAP DG1C23A-01 1/2 2 150 THD ALUMINUM, CAP, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER ASME B16.3, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 14 CAP DG1C23A-01 3 12 BW 40 ALUMINUM, CAP, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 15 STRAIGHT AND REDUCER TEE DG1C23A-01 1/2 2 150 THD ALUMINUM, STRAIGHT AND REDUCER TEE, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER ASME B16.3, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 16 STRAIGHT AND REDUCER TEE DG1C23A-01 3 12 BW 40 ALUMINUM, STRAIGHT AND REDUCER TEE, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 OLET DG1C23A-01 1/2 2 3000 THD ALUMINUM, THREDOLET, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 18 OLET DG1C23A-01 1/2 2 3000 SW ALUMINUM, SOCKOLET, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 397/761 PIPING CLASS CLASS: DG1C23A-01 Item PIPING ELEMENT CLASS DN from DN to RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 19 OLET DG1C23A-01 3 12 BW 40 ALUMINUM, WELDOLET, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 20 PLUG DG1C23A-01 1/2 2 150 THD ALUMINUM, PLUG SOLID, SQUARE HEAD, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER ASME B16.3, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 21 COUPLING DG1C23A-01 1/2 2 150 THD ALUMINUM, COUPLING, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER ASME B16.3, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 22 COUPLING DG1C23A-01 1/2 2 150 SW ALUMINUM, COUPLING, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER ASME B16.3, SOCKET WELDING ENDS AS PER ASME B16.11 23 ELBOW 45 DEGREES (MITTRED) DG1C23A-01 3 12 ALUMINUM, ELBOW 45 DEGREES, SINGLE WELD MITTRED, ASTM B-241 GR. 6063-T6, . 24 ELBOW 45 DEGREES ALUMINUM, ELBOW 45 DEGREES, BEND 4'- (BEND) DG1C23A-01 3 6 0" RADIUS, ASTM B-241 GR. 6063-T6, . 25 ELBOW 45 DEGREES (BEND) DG1C23A-01 8 12 ALUMINUM, ELBOW 45 DEGREES, BEND 6'- 0" RADIUS, ASTM B-241 GR. 6063-T6, . 26 ELBOW 90 DEGREES (MITTRED) DG1C23A-01 3 12 ALUMINUM, ELBOW 90 DEGREES, TWO WELD MITTRED, ASTM B-241 GR. 6063-T6, . ECP-VST-G-GEN-FT-001 398/761 PIPING CLASS CLASS: DG1C23A-01 Item PIPING ELEMENT CLASS DN from DN to RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 27 ELBOW 90 DEGREES (BEND) DG1C23A-01 3 6 ALUMINUM, ELBOW 90 DEGREES, BEND 4'- 0" RADIUS, ASTM B-241 GR. 6063-T6, . 28 ELBOW 90 DEGREES (BEND) DG1C23A-01 8 12 ALUMINUM, ELBOW 90 DEGREES, BEND 6'- 0" RADIUS, ASTM B-241 GR. 6063-T6, . 29 FLANGE DG1C23A-01 1/2 2 150 FF 40 ALUMINUM, THREADED FLANGE, ASTM B- 247 GR. 6061 T6, DIMENSIONS AS PER ASME B 16.5, FLANGES SHALL MEET THE DIMENSIONAL AND TOLERANCE REQUIREMENTS OF ASME B16.5 (ASME B31.3 - APPENDIX L, ALUMINUM ALLOY PIPE FLANGES), FLAT FACE FLANGED END 30 FLANGE DG1C23A-01 1/2 2 150 FF 40 ALUMINUM, SLIP ON FLANGE, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER ASME B 16.5, FLANGES SHALL MEET THE DIMENSIONAL AND TOLERANCE REQUIREMENTS OF ASME B16.5 (ASME B31.3 - APPENDIX L, ALUMINUM ALLOY PIPE FLANGES), FLAT FACE FLANGED) END 31 FLANGE DG1C23A-01 1/2 12 150 FF 40 ALUMINUM, WELDING NECK FLANGE, ASTM B-247 GR. 6061 T6, DIMENSIONS AS PER ASME B 16.5, FLANGES SHALL MEET THE DIMENSIONAL AND TOLERANCE REQUIREMENTS OF ASME B16.5 (ASME B31.3 - APPENDIX L, ALUMINUM ALLOY PIPE FLANGES), FLAT FACE FLANGED END ECP-VST-G-GEN-FT-001 399/761 PIPING CLASS CLASS: DG1C23A-01 Item PIPING ELEMENT CLASS DN from DN to RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION NOTES 32 FLANGE (PLATE) DG1C23A-01 3 12 150 FF ALUMINUM, FLANGE, ASTM B-209 GR. 6061 T6, FABRICATED FROM 1/2" PLATE, DRILLING ASME 125 Lb. STANDARD, FLAT FACE FLANGED END 33 BLIND FLANGE (PLATE) DG1C23A-01 3 12 150 FF ALUMINUM, BLIND FLANGE, ASTM B-209 GR. 6061 T6, FABRICATED FROM 1/2" PLATE, DRILLING ASME 125 LB, FLAT FACE FLANGED END 34 FIGURE 8 DG1C23A-01 3 12 150 FF ALUMINUM, FIGURE 8 BLIND, ASTM B-209 GR. 6061 T6, FABRICATED FROM 1/2" PLATE, DRILLING ASME 125 LB, FLAT FACE ENDS 35 GASKET DG1C23A-01 1/2 12 150 FF SOFT IRON, GASKET, 1/8" INCHES THICKNESS WHITE NEOPRENE RING, GARLOCK 7986 OR EQUIVALENT, INTERNAL DIAMETER OF GASKET EQUAL TO INTERNAL DIAMETER OF PIPE, . 36 BOLTING ALUMINUM, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B8 CL. 1 / ASTM A DG1C23A-01 194 GR. F8, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 NOTES: ECP-VST-G-GEN-FT-001 400/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T BRANCH CONNECTIONS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES R RELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: DG1C23A-01 ECP-VST-G-GEN-FT-001 401/761 Elaborado 25/03/2011 CLASS 300 MATERIAL: REVISION: 2 DESIGN PRESSURE (PSIG): From: 1 ALUMINUM To: 720 DESIGN TEMPERATURE (°F): From: -20 To: 250 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 720 POLYETHYLENE PELLETS, PELLET COOLING WATER LAC 150 710 ETHYLENE ETI 200 700 250 675 CORROSION ALLOWANCE POR: Adolfo Triviño / Jaime Amador 1/16" FLANGE FINISH DATE: 5-oct-04 FF DG2C23A-01 ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PIPING CLASS NOTES: 1.- ALUMINUM PIPE SHALL BE PROTECTED AGAINST CONTACT WITH STEEL AT SUPPORT POINTS WITH BLACK POLYETHYLENE SHEET APPROX 30 MILS THICK BY 12 INCHES WIDTH. POLYETHYLENE SHEET SHALL BE WRAPPED AROUND PIPE WITH THE LAP ON THE SIDE TO SHED WATER AND FASTENED WITH ALUMINUM BANDS. 2.- FLANGES SHALL MEET THE DIMENSIONAL AND TOLERANCE REQUIREMENTS OF ASME B16.5 (ASME B31.3 - APPENDIX L, ALUMINUM ALLOY PIPE FLANGES) 150 300 600 900 1500 -20 to 100 270 720 150 257 710 200 245 700 250 230 675 ECP-VST-G-GEN-FT-001 402/761 PIPING CLASS CLASS: DG2C23A-01 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHED ULE COMPONENTS DESCRIPTION NOTES 1 GATE VALVE DG2C23A-01 1/2 2 300 THD BRONZE, GATE VALVE, ASTM B-62, ACCORDING TO MSS-SP-80, FEMALE THREADED ENDS, AS PER ANSI B 1. 20. 1, NPT, TEST AS PER API 598, BRONZE TRIM, GARLOCK 3000 GASKET OR EQUIVALENT, UNION BONNET, SPLIT WEDGE DISC, INTEGRAL SEAT RING, TEFLON PACKING REPLACEABLE WHEN VALVE IS UNDER PRESSURE, HANDWHEEL 2 KNIFE GATE VALVE DG2C23A-01 3 12 300 FF CARBON STEEL, KNIFE GATE VALVE, WAFER PATTERN, ASTM A- 216 GR. WCB, MSS-SP-81 , 304 SS TRIM, 304 SS KNIFE, METAL SEAT AND TEFLON PACKING, 3 BUTTERFLY VALVE DG2C23A-01 3 6 300 FF CAST IRON, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-126 Gr. B, ACCORDING TO API 609, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TEST AS PER API 598, BRONZE TRIM, CAST IRON DISC, METAL TO METAL SEATING, LEVER OPERADOR 4 PIPE DG2C23A-01 1/2 12 BE 80 ALUMINUM, SEAMLESS PIPE, ASTM B-241 GR. 6063-T6, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 5 ELBOW 45 DEGREES DG2C23A-01 1/2 12 BW 80 ALUMINUM, ELBOW 45 DEGREES, LONG RADIUS, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 6 ELBOW 90 DEGREES DG2C23A-01 1/2 12 BW 80 ALUMINUM, ELBOW 90 DEGREES, LONG RADIUS, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 7 CONCENTRIC REDUCER DG2C23A-01 1/2 12 BW 80 ALUMINUM, CONCENTRIC REDUCER, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 8 ECCENTRIC REDUCER DG2C23A-01 1/2 12 BW 80 ALUMINUM, ECCENTRIC REDUCER, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 9 CAP DG2C23A-01 1/2 12 BW 80 ALUMINUM, CAP, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PERASME B16.9, BEVELED ENDS AS PER ASME B16.25 10 STRAIGHT AND REDUCER TEE DG2C23A-01 1/2 12 BW 80 ALUMINUM, STRAIGHT TEE, ASTM B-361 GR. 6061 T6, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 11 COUPLING ALUMINUM, COUPLING, ASTM B-247 GR. 6061 T6, DIMENSIONS AS Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 DG2C23A-01 1/2 2 THD 80 PER ASME B16.3, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 12 ELBOW 45 DEGREES (MITTRED) DG2C23A-01 1/2 12 80 ALUMINUM, ELBOW 45 DEGREES, SINGLE WELD MITTRED, ASTMB-241 GR. 6063-T6, . 13 ELBOW 45 DEGREES (BEND) DG2C23A-01 3 6 80 ALUMINUM, ELBOW 45 DEGREES, BEND 4'-0" RADIUS, ASTM B-241 GR. 6063-T6, . 14 ELBOW 45 DEGREES (BEND) DG2C23A-01 8 12 80 ALUMINUM, ELBOW 45 DEGREES, BEND 6'-0" RADIUS, ASTM B-241 GR. 6063-T6, . 15 ELBOW 90 DEGREES (MITTRED) DG2C23A-01 1/2 12 80 ALUMINUM, ELBOW 90 DEGREES, TWO WELD MITTRED, ASTM B-241 GR. 6063-T6, . 16 ELBOW 90 DEGREES (BEND) DG2C23A-01 3 6 80 ALUMINUM, ELBOW 90 DEGREES, BEND 4'-0" RADIUS, ASTM B-241 GR. 6063-T6, . 17 ELBOW 90 DEGREES (BEND) DG2C23A-01 8 12 80 ALUMINUM, ELBOW 90 DEGREES, BEND 6'-0" RADIUS, ASTM B-241 GR. 6063-T6, . 18 FLANGE DG2C23A-01 1/2 12 300 FF 80 ALUMINUM, THREADED FLANGE, ASTM B-247 GR. 6061 T6, FLANGES SHALL MEET THE DIMENSIONAL AND TOLERANCE REQUIREMENTS OF ASME B16.5 (ASME B31.3 - APPENDIX L, ALUMINUM ALLOY PIPE FLANGES), FLAT FACE FLANGED END 19 FLANGE DG2C23A-01 1/2 12 300 FF 80 ALUMINUM, WELDING NECK FLANGE, ASTM B-247 GR. 6061 T6, FLANGES SHALL MEET THE DIMENSIONAL AND TOLERANCE REQUIREMENTS OF ASME B16.5 (ASME B31.3 - APPENDIX L, ALUMINUM ALLOY PIPE FLANGES), FLAT FACE FLANGED END 20 FIGURE 8 DG2C23A-01 1/2 12 300 FF ALUMINUM, FIGURE 8 BLIND, ASTM B-209 GR. 6061 T6, FABRICATED FROM 1/2" PLATE, DRILLING ASME 125 LB, FLAT FACE ENDS 21 GASKET DG2C23A-01 1/2 12 300 FF SOFT IRON, GASKET, 1/8" INCHES THICKNESS WHITE NEOPRENE RING, GARLOCK 7986 OR EQUIVALENT, INTERNAL DIAMETER OF GASKET EQUAL TO INTERNAL DIAMETER OF PIPE, . 22 BOLTING DG2C23A-01 ALUMINUM, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B8 CL. 1 / ASTM A 194 GR. F8, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2, FLANGE BOLTS TO HAVE TWO GALVANIZED STEEL WASHERS, ONE UNDER HEAD AND ONE UNDER NUT. NOTES: ECP-VST-G-GEN-FT-001 403/761 B 24 T R 20 R T A 18 R R T N 16 R R R T C 14 R R R R T H 12 R R R R R T 10 R R R R R R T Versión 1 Elaborado 25/03/2011 BRANCH CONNECTIONS CÓDIGO CNE ECP-VST-P-MET-ET-006 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES 10 R R R R R R T S 8 W R R R R R R T I 6 W W W R R R R R T Z 4 W W W W W W R R R T E 3 W W W W W W W W R R T 2 S S S S S S S S S S S T 1½ S S S S S S S S S S S R T 1 S S S S S S S S S S S R R T ¾ S S S S S S S S S S S R R R T ½ S S S S S S S S S S S R R R R T 24 20 18 16 14 12 10 8 6 4 3 2 1½ 1 ¾ ½ H E A D E R S I Z E CODE EXPLANATION OF CHARACTERES R RELDOLET S SOCKOLET R REDUCING TEE T NORMAL TEE (Full Size) APPLICABLE CLASS: DG2C23A-01 ECP-VST-G-GEN-FT-001 404/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 275 API 5L GR. X65 PSL2 DATE: 10-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 190 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 DILUTED PRODUCED FLUID DPF 200 260 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 CÓDIGO CNE ECP-VST-P-MET-ET-006 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 ANSI RATINGAB1A31-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A216 GR. WCB / ASTM A234 GR. WPB / ASTM A516 GR. 70 / ASTM A694 F65 / MSS SP-75 WPHY65 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- NO DESTRUCTIVE EXAMINATION 20 % X-RAY ECP-VST-G-GEN-FT-001 405/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 275 API 5L GR. X65 PSL2 DATE: 10-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 190 CÓDIGO CNE ECP-VST-P-MET-ET-006 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 ANSI RATINGAB1A31-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A216 GR. WCB / ASTM A234 GR. WPB / ASTM A516 GR. 70 / ASTM A694 F65 / MSS SP-75 WPHY65 ECP-VST-G-GEN-FT-001 406/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB1A31-01 1/2 1+1/2 800# SW GA04F0B2 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A-105, ACCCORDING TO API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD 2 GATE VALVE AB1A31-01 1/2 1+1/2 800# FTH GA04H0B2 3 GATE VALVE AB1A31-01 2 10 150# RF GA01A0B1 4 GATE VALVE AB1A31-01 12 24 150# RF GA01A0B1 A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, ACCORDING TO CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR 5 GATE VALVE AB1A31-01 26 42 150# RF GA01A0B1 6 GATE VALVE AB1A31-01 2 24 150# RF GA01A0B3 , , , API 6D FOR FLG ASME B16.47 SERIES B, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTENCARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FL ECP-VST-G-GEN-FT-001 407/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 7 GLOBE VALVE AB1A31-01 1/2 1+1/2 800# SW GL04F0B2 8 GLOBE VALVE AB1A31 01 2 8 150# RF GL01A0B2 CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A-105, ALL APLICABLE POINTS AS FOR API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APLICABLE POINTS AS FOR API 600 / BS1873, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE 8 GLOBE VALVE AB1A31-01 2 8 150# RF GL01A0B2 9 GLOBE VALVE AB1A31-01 10 16 150# RF GL01A0B2 10 CHECK VALVE AB1A31-01 2 36 150# RF CK01A0B1 CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APLICABLE POINTS AS FOR BS 1873, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COEFF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, FB, RB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8) CARBON STEEL, NEEDLE VALVE, ASTM A-105, DIMENSIONS AS PER ASME FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL 11 NEEDLE VALVE AB1A31-01 3/4 1 800# SW NE04F0B2 12 BALL VALVE AB1A31-01 1/2 1+1/2 800# PE BA04G0I1J 13 BALL VALVE AB1A31-01 2 6 150# RF BA01A0I1J , , , B16.10, SOCKET WELDING, RATING AS PER ASME B16.34, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, TRIM: API TRIM 8, SEATS: RENEWABLE TYPE, DISC: NEEDLE, STEM: O.S. & Y. / RISING STEM RISING OPERATOR, ENDS: AS PER ASME B16.11, OPERATION: HANDWHEEL, PACKING: FLEXIBLE GRAPHITE CARBON STEEL, BALL VLV EXT.FEM.END W/2NIP FB, FLOATING, FULL PORT, ASTM A-105, CONSTRUCTION AS PER ASME B 16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: + 6" NIPPLES WELDED +A106 GR B+SCH160 CARBON STEEL, BALL VALVE LP FULL PORT, ASTM A216 GR. WCB, ACCORDING TO API 608, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: HAND WHEEL OPERATOR ECP-VST-G-GEN-FT-001 408/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 14 BALL VALVE AB1A31-01 8 20 150# RF BA01A0I1J 15 PIPE AB1A31 01 1/2 3/4 PE 160 T 01 CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER 15 PIPE AB1A31-01 1/2 3/4 PE 160 T-01 16 PIPE AB1A31-01 1 1+1/2 PE 80 T-01 17 PIPE AB1A31-01 2 2 BE 80 T-01 18 PIPE AB1A31-01 3 6 BE STD T-04 19 PIPE AB1A31-01 8 12 BE 20 T-04 20 PIPE AB1A31-01 14 24 BE 10 T-04 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36 10 BEVELED ENDS AS PER ASME B16 25 DOUBLE RANDOM CARBON STEEL, SEAMLESS PIPE, ASTM A 106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 21 PIPE AB1A31-01 26 30 BE 10 T-04 22 PIPE AB1A31-01 36 36 BE 10 T-04 23 PIPE AB1A31-01 42 42 BE STD T-04 24 45 DEGREE INDUCTION BEND R = 6D AB1A31-01 6 42 BW ACCORDING TO PIPE SCHEDULE A-03 ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, 45 DEGREE INDUCTION BEND R=6D, API 5L GR. X65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 409/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 25 90 DEGREE INDUCTION BEND R = 6D AB1A31-01 6 42 BW ACCORDING TO PIPE SCHEDULE A-03 26 NIPPLE AB1A31-01 1/2 1+1/2 PE ACCORDING TO PIPE SCHEDULE T-01 27 NIPPLE AB1A31-01 1/2 1+1/2 PE X MTH S-XXS T-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, THREADED END AS PER ASME B1.20.1, NPT, L = 100mm CARBON STEEL, 90 DEGREE INDUCTION BEND R=6D, API 5L GR. X65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49, BEVELED ENDS AS PER ASME B16.25 28 NIPPLE AB1A31-01 1/2 1+1/2 MTH S-XXS T-01 29 NIPPLE AB1A31-01 1/2 1+1/2 PE S-160 T-01 30 NIPPLE AB1A31-01 1/2 1+1/2 PE X MTH S-XXS T-01 31 ELBOW 45 DEGREES AB1A31-01 1/2 1+1/2 6000# SW A-01 32 ELBOW 90 DEGREES AB1A31-01 1/2 1+1/2 6000# SW A-01 33 ELBOW 45 DEGREES AB1A31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 200mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, THREADED END AS PER ASME B1.20.1, NPT L = 200mm CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100mm 34 ELBOW 45 DEGREES AB1A31-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 35 ELBOW 90 DEGREES AB1A31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 36 ELBOW 90 DEGREES AB1A31-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 37 ELBOW 45 DEGREE R = 5D AB1A31-01 4 42 BW ACCORDING TO PIPE SCHEDULE A-03 4 42 1/2 1 1/2 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREE, R = 5D E.R.W, API 5L GR. X65, MANUF.S STD/ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A694 F65, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-03AB1A31-0138 OLET 6000# BW x SW ACCORDING TO PIPE SCHEDULE ECP-VST-G-GEN-FT-001 410/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 6 42 2 16 40 STRAIGHT TEE AB1A31-01 1/2 1+1/2 6000# SW A-01 3/4 1+1/2 1/2 1+1/2 CARBON STEEL, WELDOLET, ASTM A694 F65, DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 A-03 SW X SW A-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.1141 REDUCER TEE 6000# AB1A31-01 AB1A31-01 39 OLET 42 STRAIGHT TEE AB1A31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 43 STRAIGHT TEE AB1A31-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 44 STRAIGHT BARRED TEE AB1A31-01 8 36 BW ACCORDING TO PIPE SCHEDULE A-03 2 2 1 1/2 1 1/2 3 42 2 36 4 36 2 30 48 COUPLING AB1A31-01 1/2 1+1/2 6000# SW X FTH A-01 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUF´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-03BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16 11 FEMALE THREADED END AS PER ASME B1 20 1 NPT SOCKET REDUCER TEE 45 REDUCER TEE AB1A31-01 AB1A31-0147 A-02 46 REDUCER TEE BW x BW ACCORDING TO PIPE SCHEDULE BW x BW ACCORDING TO PIPE SCHEDULE AB1A31-01 A-03 48 COUPLING AB1A31-01 1/2 1+1/2 6000# SW X FTH A-01 49 COUPLING AB1A31-01 1/2 1+1/2 6000# FTH A-01 50 COUPLING AB1A31-01 1 1+1/2 6000# SW A-01 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 411/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 51 HALF COUPLING AB1A31-01 1 1+1/2 6000# PE X FTH A-01 52 HALF COUPLING AB1A31-01 1 1+1/2 6000# PE X SW A-01 2 3 1/2 1+1/2 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, PLAIN END, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL CONCENTRIC SWAGE ASTM A 234 Gr. WPB, AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, PLAIN END A-02BW X PECONCENTRIC REDUCER AB1A31-01 ACCORDING TO PIPE SCHEDULE53 1/2 2 1/2 3/4 3/4 1+1/2 1/2 1 3/4 1+1/2 1/2 1 2 2 1 1/2 1 1/2 3 42 2 36 2 3 1/2 1 1/2 3/4 1 1/2 CARBON STEEL CONCENTRIC REDUCING NIPPLE SEAMLESS ASTM A 234 Gr. WPB, AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, MALE THREADED END AS PER ASME B1.20.1, NPT CARBON STEEL CONCENTRIC REDUCING NIPPLE SEAMLESS ASTM A 234 Gr. WPB, AS PER MSS SP-95, PLAIN END, MALE THREADED END AS PER ASME B1.20.1, NPT CARBON STEEL CONCENTRIC REDUCING NIPPLE SEAMLESS ASTM A 234 Gr. WPB, AS PER MSS SP-95, PLAIN ENDS CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25AB1A31-01 ACCORDING TO CARBON STEEL, ECCENTRIC REDUCING NIPPLE, SEAMLESS, ASTM A 234 CONCENTRIC REDUCER 59 A-02 BW X PE ACCORDING TO PIPE SCHEDULE BW x BW ACCORDING TO PIPE SCHEDULE A-02 A-03 A-02 A-02ACCORDING TO PIPE SCHEDULE57 CONCENTRIC REDUCER AB1A31-01 ECCENTRIC REDUCER 58 A-02 ACCORDING TO PIPE SCHEDULE BW X MTH PE X MTH CONCENTRIC REDUCER AB1A31-01 AB1A31-01 54 CONCENTRIC REDUCER AB1A31-01 AB1A31-01 ACCORDING TO PIPE SCHEDULE56 ACCORDING TO PIPE SCHEDULE 55 CONCENTRIC REDUCER BW x BW PE X PE 3/4 1 1/2 1/2 1 3 42 2 36 62 UNION AB1A31-01 1/2 3/4 6000# SW 63 UNION AB1A31-01 1 1+1/2 3000# SW 64 PLUG AB1A31-01 1/2 1+1/2 MTH 65 CAP AB1A31-01 1/2 1+1/2 6000# SW A-01 66 CAP AB1A31-01 1/2 1+1/2 6000# FTH A-01 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 61 A-02 A-03 PE X MTH BW X BW ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC REDUCING NIPPLE, SEAMLESS, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED END AS PER ASME B1.20.1, NPT, PLAIN END 60 ECCENTRIC REDUCER ECCENTRIC REDUCER AB1A31-01 AB1A31-01 67 CAP AB1A31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 412/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 68 CAP AB1A31-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 69 FLANGE AB1A31-01 1/2 1+1/2 150# RF ACCORDING TO PIPE SCHEDULE B-01 70 FLANGE AB1A31-01 1+1/2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKET WELD FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, LONG WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS MANUFACTURER´S STD, RAISED FACE FLANGED END 71 FLANGE AB1A31-01 2 2 150# RF ACCORDING TO PIPE SCHEDULE B-02 72 FLANGE AB1A31-01 3 24 150# RF ACCORDING TO PIPE SCHEDULE B-04 73 FLANGE AB1A31-01 26 42 150# RF ACCORDING TO PIPE SCHEDULE B-04 74 BLIND FLANGE AB1A31-01 1/2 2 150# RF B-01 75 BLIND FLANGE AB1A31-01 3 24 150# RF B-05 76 BLIND FLANGE AB1A31-01 26 42 150# RF B-05 CARBON STEEL, BLIND FLANGE, ASTM A 694 F65, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE (WITH NPT ORIFICE 1/2 TH TAP) ASTM A 105 CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F65, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 77 ORIFICE FLANGE AB1A31-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE 78 ORIFICE FLANGE AB1A31-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE 79 PADDLE BLIND AB1A31-01 14 30 150# RF 80 SPACER RING AB1A31-01 14 30 150# RF 81 FIGURE 8 AB1A31-01 1/2 12 150# RF WELDING NECK FLANGE (WITH NPT ORIFICE 1/2 TH-TAP), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE (WITH NPT ORIFICE 1/2 TH-TAP), ASTM A694 F65, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A694 F65. CARBON STEEL, PADDLE BLIND ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE SPECTACLE BLIND F8S, ASTM A516 GRADE 70, WAFER JOINT TYPE, 150 LB, RF, ASME B16.48 STAINLESS STEEL SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND 82 GASKET AB1A31-01 1/2 42 150# RF E-01 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5, B16.47, ACCORDING TO ASME B16.20 ECP-VST-G-GEN-FT-001 413/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 83 GASKET AB1A31-01 1/2 42 300# RF E-01 84 INSULATION KIT AB1A31-01 1 42 150# STD FINISH E-04 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5, B16.47, ACCORDING TO ASME B16.20 INSULATION KIT, DIMENSIONS AS PER MANUFACTURER'S STD, GASKET TYPE F WITH SEALS, INSULATING WASHERS, STEEL WASHERS AND INSULATING SLEEVES, ACCORDING TO MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE 85 BOLTING AB1A31-01 P-01 HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 414/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 AROMATIC HYDROCARBONS ARM 200 260 BLENDED CRUDE CRM 300 230 CHEMICALS QUI 400 200 CHILLED WATER LCW 500 170 CLARIFIED WATER CLW 600 140 CONDENSATE CND 650 125 COOLING WATER - RETURN CWR 700 110 COOLING WATER - SUPPLY CWS 750 95 CRUDE OIL CRU 800 80 CUPIAGUA CRUDE CUP 850 65 CUSIANA CRUDE CUS 900 50 CYCLE OIL - HEAVY HCO CYCLE OIL - LIGHT ALC DEMINERALIZED WATER DWA DIESEL OIL “ACPM” DSO FILTERED WATER TRW FIRE WATER FWA FLUE GAS FLU FLUOROPROTEINIC FIRE FOAM EXP FUEL GAS FUG FUEL OIL FUO GASOIL GLS RF ANSI RATING ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/16" AA1A23-01 FLANGE FINISH GASOIL GLS GASOLINE MOTOR EXTRA EXT ECP-VST-G-GEN-FT-001 415/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) RF ANSI RATING ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/16" AA1A23-01 FLANGE FINISH GASOLINE MOTOR REGULAR COC HEAVY FUEL OIL HFO HEAVY GASOIL HGO HEAVY NAPHTHA HGA HIGH PRESSURE STEAM HPS HOT OIL HOL HOT WATER HTW HYDROCARBONS VAPORS VAP HYDROGEN HYD INDUSTRIAL AIR UTA INSTRUMENT AIR INA JET FUEL JET KEROSENE KER LIGHT GASOIL LGO LIGHT NAPHTHA LGA LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG LOW PRESSURE CONDENSATE LPC LOW PRESSURE STEAM LPS LUBE OIL ACI LUBE OIL BASIS BAS LUBRICATING OIL LMO NAPHTHA NAPNAPHTHA NAP NAPHTHENIC CRUDE CRN NATURAL GAS NTG NITROGEN NIT OILY WATER OEW OILY WATER SEWER OSW POTABLE WATER PWA PROPANE PRY QUENCH OIL QHO RAW WATER RAW SANITARY SEWER SSW SEAL OIL SEO ECP-VST-G-GEN-FT-001 416/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) RF ANSI RATING ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/16" AA1A23-01 FLANGE FINISH SEWER EWS SLOP SLP SLOP. HEAVY SLOP SLH SOFTENED WATER SWA VERY LOW PRESSURE STEAM LLS WASTE WATER WWT ASOCIATED GAS ASG OIL AND WATER MIXTURE CRW FLARE FLA CLOSE DRAIN CLD MEDIUM PRESSURE STEAM MPS NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F ECP-VST-G-GEN-FT-001 417/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AA1A23-01 1/2 1 1/2 800# SW GA04F0B2 2 GATE VALVE AA1A23-01 2 12 150# RF GA01A0B1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, FB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE HANDWHEEL OPERATOR 3 GATE VALVE AA1A23-01 14 24 150# RF GA01A0B1 PRESSURE, HANDWHEEL OPERATOR CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, FB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR ECP-VST-G-GEN-FT-001 418/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 4 GATE VALVE AA1A23-01 26 36 150# RF GA01A0B1 5 CHECK VALVE AA1A23-01 1/2 1 1/2 800# SW CL04F0B2 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, ACCORDING TO API 600 / API 6D FOR FLG ASME B16.47 SERIES B, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. CARBON STEEL, (LIFT) SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT. ACC. TO API 602 6 CHECK VALVE AA1A23-01 2 24 150# RF CK01A0B1 7 CHECK VALVE AA1A23-01 26 36 150# RF CK01A0B1 CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, FB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.47, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8) CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS ECP-VST-G-GEN-FT-001 419/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 8 GLOBE VALVE AA1A23-01 1/2 1 1/2 800# SW GL04F0B2 9 GLOBE VALVE AA1A23-01 2 12 150# RF GL01A0B2 CARBON STEEL, GLOBE VALVE, ASTM A-105, RB, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34/API 602, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, RB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34/BS 1873, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, 10 GLOBE VALVE AA1A23-01 10 16 150# RF GL01A0B2 11 BUTTERFLY VALVE AA1A23-01 2 12 150# RF BT01A0I2 STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB; RB, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. ACC. TO BS 1873 CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR ECP-VST-G-GEN-FT-001 420/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 12 BUTTERFLY VALVE AA1A23-01 14 24 150# RF BT01A0I2 13 BALL VALVE AA1A23-01 1/2 1 1/2 800# THD BA04H0B1 14 BALL VALVE AA1A23-01 1/2 1 1/2 800# SW BA04F0B1 CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A- 105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A- 105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR CARBON STEEL BALL VALVE TRUNNION MOUNTED FULL 15 BALL VALVE AA1A23-01 2 12 150# RF BA01A0B1 16 BALL VALVE AA1A23-01 14 24 150# RF BA01A0B1 17 BALL VALVE AA1A23-01 26 36 150# RF BA01A0B1 CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, SS 316 BALL, HANDWHEEL OPERATOR CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608 / 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16.47 SERIE B, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, SS 316 BALL, GEAR OPERATOR CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608 / 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, SS 316 BALL, GEAR OPERATOR ECP-VST-G-GEN-FT-001 421/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 18 BALL VALVE AA1A23-01 2 6 150# RF BA01A0I1J 19 BALL VALVE AA1A23-01 8 20 150# RF BA01A0I1J 20 PLUG VALVE AA1A23-01 3 12 150# RF PL01A0B2 CARBON STEEL, BALL VALVE, FULL BORE, ASTM A-216 GR. WCB; BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST. CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL BORE, ASTM A-216 GR. WCB, ACCORDING TO API 608, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TEST CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, RB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16 34 TESTS AS PER API 21 PLUG VALVE AA1A23-01 14 24 150# RF PL01A0B2 22 PIPE AA1A23-01 1/2 1 1/2 PE 160 T-01 23 PIPE AA1A23-01 2 6 BE 40 T-01 CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, RB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" ECP-VST-G-GEN-FT-001 422/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 24 PIPE AA1A23-01 8 24 BE 20 T-01 25 PIPE AA1A23-01 26 30 BE 10 T-01 26 PIPE AA1A23-01 36 36 BE STD T-01 27 PIPE AA1A23-01 42 42 BE XS T-01 28 ELBOW 45 DEGREES AA1A23-01 1/2 3/4 6000# SW A-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, E.F.W. D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16 11 CARBON STEEL, E.F.W. PIPE, ASTM A672 GR. C70 CL.12, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.F.W. PIPE, ASTM A672 GR. C70 CL.12, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY, DOUBLE RANDOM LENGHT >= 2" 29 ELBOW 45 DEGREES AA1A23-01 1 1 1/2 3000# SW A-01 30 ELBOW 45 DEGREES AA1A23-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 31 ELBOW 45 DEGREES AA1A23-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 32 ELBOW 45 DEGREES AA1A23-01 42 42 BW ACCORDING TO PIPE SCHEDULE A-03 AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS,MSS SP- 75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY ECP-VST-G-GEN-FT-001 423/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 33 ELBOW 90 DEGREES AA1A23-01 1/2 1 1/2 3000# SW ACCORDING TO PIPE SCHEDULE A-01 34 ELBOW 90 DEGREES AA1A23-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 35 ELBOW 90 DEGREES AA1A23-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 36 ELBOW 90 DEGREES AA1A23-01 42 42 BW ACCORDING TO PIPE SCHEDULE A-03 2 4 1/2 2 A-0237 CONCENTRIC REDUCER AA1A23-01 BW x PE ACCORDING TO PIPE SCHEDULE CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS,MSS SP- 75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY 1/2 2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 3 24 2 22 26 36 18 30 42 BW x BW ACCORDING TO PIPE SCHEDULE A-02 ACCORDING TO PIPE SCHEDULE A-02PE x PE ACCORDING TO PIPE SCHEDULE BW x BW41 CONCENTRIC REDUCER AA1A23-01 CONCENTRIC REDUCER AA1A23-01 A-02 A-02 40 CONCENTRIC REDUCER AA1A23-01 38 CONCENTRIC REDUCER AA1A23-01 A-02 39 CONCENTRIC REDUCER AA1A23-01 PE x MTH ACCORDING TO PIPE SCHEDULE BW x MTH ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC REDUCER NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME MSS SP-95, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16 25 CARBON STEEL, CONCENTRIC REDUCER NIPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME MSS SP-95, PLAIN END, MALE THREADED END AS PER ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCER NIPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME MSS SP-95, PLAIN ENDS CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY ECP-VST-G-GEN-FT-001 424/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 42 42 30 36 3 4 1/2 2 3/4 1 1/2 1/2 1 3 24 2 22 26 36 18 30 42 42 30 36 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER A-03 47 ECCENTRIC REDUCER AA1A23-01 AA1A23-01 BW X BW ECCENTRIC REDUCER ACCORDING TO PIPE SCHEDULE A-02 A-03 ACCORDING TO PIPE SCHEDULE BW x BW CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 BW x BW ACCORDING TO PIPE SCHEDULE 45 A-02 PE x MTH BW x PE A-02 ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE 46 ECCENTRIC REDUCER AA1A23-01 BW X BW ACCORDING TO PIPE 48 ECCENTRIC REDUCER AA1A23-01 ECCENTRIC REDUCER AA1A23-01 44 43 CONCENTRIC REDUCER A-02AA1A23-01 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCER NIPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS SP-95, PLAIN END, MALE THREADED END AS PER ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY 30 36 49 REDUCER INSERT AA1A23-01 1/2 2 3000# MxF 50 CAP AA1A23-01 1/2 1 1/2 3000# THD A-01 51 CAP AA1A23-01 1/2 3/4 6000# THD A-01 ASME B16.25 CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 SCHEDULE CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B16,11 ECP-VST-G-GEN-FT-001 425/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 52 CAP AA1A23-01 1/2 1 1/2 3000# SW A-01 53 CAP AA1A23-01 1/2 3/4 6000# SW A-01 54 CAP AA1A23-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 55 CAP AA1A23-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 56 CAP AA1A23-01 42 42 BW ACCORDING TO PIPE SCHEDULE A-04 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A-105, DIMENSIONS AS CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY 57 STRAIGHT TEE AA1A23-01 1/2 1 1/2 3000# SW A-01 58 STRAIGHT TEE AA1A23-01 1/2 1 1/2 6000# SW A-01 3/4 1 1/2 1/2 1 A-0159 REDUCER TEE AA1A23-01 6000# SW x SW CARBON STEEL, STRAIGHT TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 426/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 3/4 1 1/2 1/2 1 61 STRAIGHT TEE AA1A23-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 62 STRAIGHT TEE AA1A23-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 63 STRAIGHT TEE AA1A23-01 42 42 BW ACCORDING TO PIPE SCHEDULE A-03 3 24 A 02 A-01 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ACCORDING TO PIPE CARBON STEEL, REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 AA1A23-01 3000# SW x SWREDUCER TEE 64 REDUCER TEE AA1A23 01 BW BW 60 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16 9 BEVELED ENDS AS PER 2 22 26 36 16 30 42 42 30 36 1 2 1/2 1 1/2 BW x BW ACCORDING TO PIPE SCHEDULE 65 REDUCER TEE AA1A23-01 BW x BW ACCORDING TO PIPE SCHEDULE 66 REDUCER TEE 67 A-01OLET 3000# BW x THD A-02 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-03 AA1A23-01 AA1A23-01 A-02TO PIPE SCHEDULE 64 REDUCER TEE AA1A23-01 BW x BW CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, BEVELED END AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 427/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 2 24 1/2 1 1/2 26 36 1/2 1 1/2 42 42 1/2 1 1/2 2 24 1/2 1 1/2 6 24 2 12 26 36 73 OLET AA1A23 01 BW BW ACCORDING TO PIPE A-01 ACCORDING TO PIPE SCHEDULE A 02 BW x SW ACCORDING TO PIPE SCHEDULE CARBON STEEL, SOCKOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED END AS PER ASME B16.25, SOCKET WELDING END AS PER ASME B16.11 A-03 AA1A23-01 3000# BW x SW ACCORDING TO PIPE SCHEDULE CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY A-02CARBON STEEL, WELDOLET, ASTM A105 , DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 A-01 72 OLET AA1A23-01 BW x BW 68 OLET AA1A23-01 3000# 70 OLET AA1A23-01 3000# 69 OLET 71 OLET AA1A23-01 6000# BW x SW A-01 BW x SW CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS SP 97 BEVELED ENDS AS PER CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 12 16 42 42 2 16 75 PLUG AA1A23-01 1/2 2 3000# THD A-03 73 74 OLET AA1A23-01 BW x BW ACCORDING TO PIPE SCHEDULE OLET AA1A23-01 BW x BW TO PIPE SCHEDULE A-02 CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, WELDOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 428/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 76 COUPLING AA1A23-01 1/2 2 3000# THD A-01 77 COUPLING AA1A23-01 1/2 3/4 6000# SW x THD A-01 78 COUPLING AA1A23-01 1/2 2 3000# SW A-01 79 COUPLING AA1A23-01 1 1 1/2 3000# THD A-01 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKETWELD END AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 80 HALF COUPLING AA1A23-01 1/2 2 3000# THD A-01 81 HALF COUPLING AA1A23-01 1/2 2 3000# SW A-01 82 NIPPLE AA1A23-01 1/2 2 THD ACCORDING TO PIPE SCHEDULE T-01 83 NIPPLE AA1A23-01 1/2 2 PE ACCORDING TO PIPE SCHEDULE T-01 84 FLANGE AA1A23-01 1/2 1 1/2 150# RF ACCORDING TO PIPE SCHEDULE B-01 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, FOR L = 100 & 200 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, FOR L = 100 & 200 mm CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 429/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 85 FLANGE AA1A23-01 2 24 150# RF ACCORDING TO PIPE SCHEDULE B-02 86 FLANGE AA1A23-01 26 36 150# RF ACCORDING TO PIPE SCHEDULE B-02 87 FLANGE AA1A23-01 42 42 150# RF ACCORDING TO PIPE SCHEDULE B-04 88 BLIND FLANGE AA1A23-01 1/2 24 150# RF B-03 89 BLIND FLANGE AA1A23-01 26 36 150# RF B-03 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END, 100% X-RAY CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END, 100% X-RAY CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END 90 BLIND FLANGE AA1A23-01 42 42 150# RF B-05 91 ORIFICE FLANGE AA1A23-01 1/2 2 300# RF ACCORDING TO PIPE SCHEDULE 92 ORIFICE FLANGE AA1A23-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE CARBON STEEL, BLIND FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. ECP-VST-G-GEN-FT-001 430/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 P 93 BLIND PLATE AA1A23-01 14 24 150# RF 94 SPACER RING AA1A23-01 14 30 150# RF 95 PADDLE BLIND AA1A23-01 14 30 150# RF 96 FIGURE 8 AA1A23-01 1/2 12 150# RF 97 DRIP RINGS AA1A23-01 2 24 150# RF 98 GASKET AA1A23-01 1/2 42 150# RF E-01 CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS; WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16 20 SUITABLE FOR RAISED FACE FLANGES ASME CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE 99 BOLTING AA1A23-01 P-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16 5 ECP-VST-G-GEN-FT-001 431/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS 1 GATE VALVE AA1A23-01 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A- 105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A105 0,1 F8 STELLITE INTEGRA L SS304 SPIRAL WOUN D SOLID HAND WHELL A2- 1F 1/2 TO 1 1/2 285 250 A105 0,06 F6 STELLITE INTEGRA L SS304 SPIRAL WOUND SOLID HAND WHELL VC- 100 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL 2 GATE VALVE AA1A23-01 2 1/2 12 150 RF CARBON STEEL, GATE VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A216 WCB 0,1 F8 STELLITE RENEWA BLE SS304 SPIRAL WOUN D FLEXIB LE HAND WHELL A2- 1F 2 TO 10 285 250 A216 WCB 0,06 F6 STELLITE RENEWA BLE SS304 SPIRAL WOUND SOLID HAND WHELL VC- 200 Diferencias en: Rango de Diámetros, Trim & Wedge. Se deja la configuración de ECOPETROL Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 3 GATE VALVE AA1A23-01 14 24 150 RF CARBON STEEL, GATE VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 285 100 A216 WCB 0,1 F8 STELLITE RENEWA BLE SS304 SPIRAL WOUN D FLEXIB LE GEAR A2- 1F 12 TO 20 285 250 A216 WCB 0,06 F6 STELLITE RENEWA BLE SS304 SPIRAL WOUND FLEXIB LE VC- 250 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 432/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 4 CHECK VALV AA1A23-01 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A- 105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 285 100 A105 0,1 F8 STELLITE INTEGRA L SS304 SPIRAL WOUN D A2- 1F 1/2 TO 1 1/2 800 285 250 A105 0,06 F6 STELLITE SS304 SPIRAL WOUND VR-100 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL 5 CHECK VALV AA1A23-01 2 1/2 24 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 285 100 A216 WCB 0,1 F8 STELLITE RENEWA BLE SS304 SPIRAL WOUN D A2- 1F 2 TO 20 150 285 250 A216 WCB 0,06 F6 STELLITE SS304 SPIRAL WOUND VR- 200 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL 6 GLOBE VALV AA1A23-01 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A- 105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL 285 100 A105 0,1 F8 STELLITE INTEGRA L SS304 SPIRAL WOUN D HAND WHELL A2- 1F 1/2 TO 1 1/2 800 285 250 A105 0,06 F6 STELLITE RENEWA BLE SS304 SPIRAL WOUND HAND WHELL VG- 100 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL g ECOPETROL ECP-VST-G-GEN-FT-001 433/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 7 GLOBE VALV AA1A23-01 2 1/2 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A- 216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A216 WCB 0,1 F8 STELLITE SS304 SPIRAL WOUN D HAND WHELL A2- 1F 2 TO 8 150 285 250 A216 WCB 0,06 F6 STELLITE RENEWA BLE SS304 SPIRAL WOUND HAND WHELL VG- 200 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL GLOBE VALV AA1A23-01 A2-1F 10 TO 16 150 285 250 A216 WCB 0,06 F6 STELLITE RENEWA BLE SS304 SPIRAL WOUND GEAR VG-250 INCLUIR 8 BUTTERFLY AA1A23-01 2 1/2 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 285 100 A216 WCB 0,1 SS31 6 DISC INCONEL LEVEL A2-1F NO EXISTE EN ESTA CLASE 9 BUTTERFLY AA1A23-01 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 285 100 A216 WCB 0,1 SS31 6 DISC INCONEL GEAR A2-1F NO EXISTE EN ESTA CLASE 10 BALL VALVE AA1A23-01 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 285 100 A105 0,1 F8 FULL POR T SS316 FULL PORT FLOATING LEVEL A2-1F 1/2 TO 1 1/2 1500 PE 285 250 A105 0,06 SS31 6 FULL BORE W/ 2 NIP VITON SS316 LEVER VB- 101 Diferencias en: Rango de Diámetros & Seats. Se deja la configuración de ECOPETROL 11 BALL VALVE AA1A23-01 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 285 100 A105 0,1 F8 FULL POR T SS316 FULL PORT FLOATING LEVEL A2-1F 285 250 0,06 NO EXISTE EN ESTA CLASE ECP-VST-G-GEN-FT-001 434/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 12 BALL VALVE AA1A23-01 2 1/2 12 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, SS 316 BALL, HANDWHEEL OPERATOR 285 100 A216 WCB 0,1 F8 FULL POR T SS316 FULL PORT TRUNION HAND WHELL A2- 1F 2 TO 6 150 RF 285 250 A216 WCB 0,06 SS31 6 REDUC ER BORE VITON SS316 LEVER VB- 200 Diferencias en: Rango de Diámetros & Seats. Se deja la configuración de ECOPETROL 13 BALL VALVE AA1A23-01 14 24 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, SS 316 BALL, GEAR OPERATOR 285 100 A216 WCB 0,1 F8 FULL POR T SS316 FULL PORT TRUNION GEAR A2-1F 8 TO 10 150 RF 285 250 A216 WCB 0,06 SS31 6 REDUC ER BORE VITON SS316 GEAR VB- 250 Diferencias en: Rango de Diámetros & Seats. Se deja la configuración de ECOPETROL BALL VALVE AA1A23-01 A2-1F 2 TO 6 150 RF 285 250 A216 WCB 0,06 SS31 6 FULL BORE VITON SS31 6 LEVER VB- 201 INCLUIR BALL VALVE AA1A23-01 A2-1F 8 TO 10 150 RF 285 250 A216 WCB 0,06 SS31 6 FULL BORE VITON SS31 6 GEAR VB- 251 INCLUIR 14 PLUG VALVE AA1A23-01 2 1/2 12 150 RF CARBON STEEL, PLUG VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 285 100 A216 WCB 0,1 F8 SS316 HAND WHELL A2- 1F 285 250 0,06 NO EXISTE EN ESTA CLASE OPERATOR 15 PLUG VALVE AA1A23-01 14 24 150 RF CARBON STEEL, PLUG VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 285 100 A216 WCB 0,1 F8 SS316 GEAR A2- 1F 285 250 0,06 NO EXISTE EN ESTA CLASE 16 PIPE AA1A23-01 1/2 2 PE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 285 100 A106 GR.B 0,1 A2- 1F 1 - 1,5 160 285 250 A106 GR.B 0,06 Diferencias en: Espesor (schedule). Se deja el espesor configurado de TIPIEL SA. PIPE AA1A23-01 2 PE 80 285 100 A106 GR.B 0,1 A2- 1F 2 80 285 250 A106 GR.B 0,06 INCLUIR ECP-VST-G-GEN-FT-001 435/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 17 PIPE AA1A23-01 2 1/2 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME 285 100 A106 GR.B 0,1 A2- 1F 40 285 250 A106 GR.B 0,06 PIPE AA1A23-01 8 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME 285 100 A106 GR.B 0,1 A2- 1F 8 20 285 250 A106 GR.B 0,06 INCLUIR 18 PIPE AA1A23-01 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 285 100 A106 GR.B 0,1 A2- 1F 10-20 20 285 250 A106 GR.B 0,06 19 ELBOW 45 D AA1A23-01 1/2 3/4 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,1 A2-1F 1/2-3/4 6000 285 250 A105 0,06 Diferencias en: Rating. Se deja el Rating configurado de TIPIEL SA. ELBOW 45 D AA1A23-01 1 1 1/2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,1 A2-1F 1-1.5 3000 285 250 A105 0,06 SW INCLUIR ELBOW 45 D AA1A23-01 2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,1 A2-1F 2 80 285 250 A234 WPB 0,06 BW INCLUIR 20 ELBOW 45 D AA1A23-01 2 1/2 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 2,5 - 6 40 285 250 A234 WPB 0,06 21 ELBOW 45 D AA1A23-01 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 8 - 20 20 285 250 A234 WPB 0,06 22 ELBOW 90 D AA1A23-01 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16 11 SOCKET WELDING ENDS AS PER 285 100 A105 0,1 A2- 1F 1/2 - 1,5 3000 285 250 A105 0,0622 ELBOW 90 D AA1A23 01 1/2 2 3000 SW B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,1 1F 1/2 1,5 3000 285 250 A105 0,06 23 ELBOW 90 D AA1A23-01 2 1/2 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 2 - 6 40 285 250 A234 WPB 0,06 24 ELBOW 90 D AA1A23-01 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, 285 100 A234 WPB 0,1 A2- 1F 8 - 20 20 285 250 A234 WPB 0,06 25 CONCENTRIC AA1A23-01 1/2 2 80 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 1/2 - 4 285 250 A234 WPB 0,06 SWA GE BWx PE CONCENTRIC AA1A23-01 A2-1F 1/2 - 2 285 250 A234 WPB 0,06 BWx MTH INCLUIR CONCENTRIC AA1A23-01 A2-1F 3/4 - 1 1/2 285 250 A234 WPB 0,06 PExM TH INCLUIR ECP-VST-G-GEN-FT-001 436/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 CONCENTRIC AA1A23-01 A2-1F 3/4 - 1 1/2 285 250 A234 WPB 0,06 PExP E INCLUIR 26 CONCENTRIC AA1A23-01 2 1/2 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, 285 100 A234 WPB 0,1 A2- 1F 2 - 6 40 285 250 A234 WPB 0,06 27 CONCENTRIC AA1A23-01 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 8 - 20 20 285 250 A234 WPB 0,06 28 ECCENTRIC AA1A23-01 1/2 2 80 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 1/2 - 4 285 250 A234 WPB 0,06 SWA GE BWx PE ECCENTRIC AA1A23-01 A2-1F 3/4 - 1 1/2 285 250 A234 WPB 0,06 PExM TH INCLUIR 29 ECCENTRIC AA1A23-01 2 1/2 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 2 - 6 40 285 250 A234 WPB 0,06 Diferencias en: Diámetro. Se deja la configuración de ECOPETROL 30 ECCENTRIC AA1A23-01 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 8 - 20 20 285 250 A234 WPB 0,06 Diferencias en: Diámetro. Se deja la configuración de ECOPETROL 31 REDUCER IN AA1A23-01 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,1 A2-1F 285 250 0,06 NO EXISTE EN ESTA CLASE CARBON STEEL CAP ASTM A-105 32 CAP AA1A23-01 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,1 A2-1F 1 - 1 1/2 3000 285 250 A105 0,06 THD ECP-VST-G-GEN-FT-001 437/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 CAP AA1A23-01 A2-1F 1/2 - 3/4 6000 285 250 A105 0,06 THD INCLUIR 33 CAP AA1A23-01 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 285 100 A105 0,1 A2-1F 1 - 1 1/2 3000 285 250 A105 0,06 SW CAP AA1A23-01 A2-1F 1/2 - 3/4 6000 285 250 A105 0,06 SW INCLUIR 34 CAP AA1A23-01 2 1/2 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 2 - 6 40 285 250 A105 0,06 BW Diferencias en: Material. Se deja la configuración 35 CAP AA1A23-01 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 8 - 20 20 285 250 A105 0,06 BW Diferencias en: Material. Se deja la configuración 36 STRAIGHT A AA1A23-01 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, 285 100 A105 0,1 A2-1F 1 - 1 1/2 3000 285 250 A105 0,06 SW STRAIGHT A AA1A23-01 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, A2- 1F 3/4 - 1 1/2 6000 285 250 A105 0,06 SW INCLUIR 37 STRAIGHT A AA1A23-01 2 1/2 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, 285 100 A234 WPB 0,1 A2- 1F 2 - 6 40 285 250 A234 WPB 0,06 BW 38 STRAIGHT A AA1A23-01 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, 285 100 A234 WPB 0,1 A2- 1F 8 - 20 20 285 250 A234 WPB 0,06 BW 39 OLET AA1A23-01 1/2 2 3000 THD CARBON STEEL, THREDOLET, ASTM A- 105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME 285 100 A105 0,1 A2-1F 285 250 A105 0,06 BW NO EXISTE EN ESTA CLASE 40 OLET AA1A23-01 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME 285 100 A105 0,1 A2-1F 2 - 20 3000 285 250 A105 0,06 BW 41 OLET AA1A23-01 2 1/2 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 2 - 6 40 285 250 A105 0,06 BW 42 OLET AA1A23-01 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 285 100 A234 WPB 0,1 A2- 1F 8 - 20 20 285 250 A105 0,06 BW 43 PLUG AA1A23-01 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS 285 100 A105 0,1 A2-1F 1 - 1 1/2 285 250 A105 0,06 MTH 44 COUPLING AA1A23-01 1/2 2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME 285 100 A105 0,1 A2-1F 1 - 1 1/2 3000 285 250 A105 0,06 SWxT HD COUPLING AA1A23-01 A2-1F 1/2 - 3/4 6000 285 250 A105 0,06 SWxT HD INCLUIR ECP-VST-G-GEN-FT-001 438/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 45 COUPLING AA1A23-01 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 285 100 A105 0,1 A2-1F 1 - 1 1/2 3000 285 250 A105 0,06 SW COUPLING AA1A23-01 A2-1F 1 - 1 1/2 3000 285 250 A105 0,06 THD INCLUIR 46 HALF COUPL AA1A23-01 1/2 2 3000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME 285 100 A105 0,1 A2-1F 1 - 1 1/2 3000 285 250 A105 0,06 PE x FTH 47 HALF COUPL AA1A23-01 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 285 100 A105 0,1 A2-1F 1 - 1 1/2 3000 285 250 A105 0,06 PE x SW 48 NIPPLE AA1A23-01 1/2 2 THD 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A106 GR.B 0,1 A2- 1F 1 - 2 80 285 250 A106 GR.B 0,06 PE x THD 49 NIPPLE AA1A23-01 1/2 2 PE 80 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 285 100 A106 GR.B 0,1 A2- 1F 1 - 2 80 285 250 A106 GR.B 0,06 PE 50 FLANGE AA1A23-01 1/2 2 150 RF 80 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,1 A2-1F 1/2 - 1 1/2 150 285 250 A105 0,06 SW 51 FLANGE AA1A23-01 2 1/2 8 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,1 A2-1F 2 - 6 150 40 285 250 A105 0,06 BW 52 FLANGE AA1A23-01 10 24 150 RF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,1 A2-1F 8 - 20 150 20 285 250 A105 0,06 BW 53 BLIND FLANG AA1A23-01 1/2 24 150 RF CARBON STEEL, BLIND FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,1 A2-1F 1/2 - 20 150 285 250 A105 0,06 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING 54 ORIFICE FLA AA1A23-01 1/2 2 300 RF 80 ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,1 A2-1F NO EXISTE EN ESTA CLASE 55 ORIFICE FLA AA1A23-01 2 1/2 8 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,1 A2-1F 2 - 6 300 40 285 250 A105 0,06 ECP-VST-G-GEN-FT-001 439/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHE DULE COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM POR T SEATS GASKE T BALL/PLU G WEDG E OPERA T NEW CLA SS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/ PLUG WEDG E OPERAT TAG VALV E NOT ES ANÁLISIS Elaborado 25/03/11 ECOPETROL REFINERÍA VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 56 ORIFICE FLA AA1A23-01 10 24 300 RF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,1 A2-1F 8 - 20 300 20 285 250 A105 0,06 57 BLIND PLATE AA1A23-01 14 24 150 RF CARBON STEEL, BLIND PLATE, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR.70 0,1 A2- 1F 14 - 20 150 285 250 A516 GR.70 0,06 58 SPACER RIN AA1A23-01 14 24 150 RF CARBON STEEL, SPACER RING, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR.70 0,1 A2- 1F 14 - 20 150 285 250 A516 GR.70 0,06 59 FIGURE 8 AA1A23-01 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR.70 0,1 A2- 1F 1/2 - 12 150 285 250 A516 GR.70 0,06 60 DRIP RINGS AA1A23-01 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM 285 100 A516 GR.70 0,1 A2- 1F NO EXISTE EN ESTA CLASE 61 GASKET AA1A23-01 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING 285 100 SS304 0,1 A2-1F 1/2 - 20 150 285 250 AISI 304 SPIRAL WOUND/G 0,06 62 BOLTING AA1A23-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 285 100 A193 GR.B7 0,1 A2- 1F 285 250 A193 GR.B7 NUTS A194 GR.2H 0,06 NOTES: AMARILLO GRIS OSCUPO GRIS CLARO ITEMS NUEVOS EN CLASES CONTRATO MARCO ITEMS QUE NO EXISTEN EN CLASES CONTRAT ITEMS QUE HAY DIFERENCIA CON RELACION ACLARO BLANCO ITEMS QUE SON IGUALES ECP-VST-G-GEN-FT-001 440/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 15-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 AMINE (Di-Ethil-Amine) DEA 200 260 AMINE (Mono-Ethil-Amine) MEA 300 230 AMMONIA AMM 400 200 AROMATIC HYDROCARBONS ARM 500 170 ASPHALT ASP 600 140 BOILER FEED WATER BFW 650 125 BUTHANE BUT 700 110 CATALYST CAT 750 95 CAUSTIC SODA CAU 800 80 CHEMICALS QUI PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AA1A33-01 FLANGE FINISH RF ANSI RATING ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 800 80 CHEMICALS QUI 850 65 CHILLED WATER LCW 900 50 CLARIFIED WATER CLW CONDENSATE CND CRACKING GAS CRA CUPIAGUA CRUDE CUP CUSIANA CRUDE CUS CYCLE OIL - HEAVY HCO CYCLE OIL - LIGHT ALC DECOKING STEAM DKS DEMEX BOTTOMS FDX DEMINERALIZED WATER DWA ETHANE ETA ETHYLENE ETI FILTERED WATER TRW FIRE WATER FWA FLUE GAS FLU ECP-VST-G-GEN-FT-001 441/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 15-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AA1A33-01 FLANGE FINISH RF ANSI RATING ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 FLUOROPROTEINIC FIRE FOAM EXP GASOIL GLS GASOLINE MOTOR EXTRA EXT GASOLINE MOTOR REGULAR COC HEAVY GASOIL HGO HEAVY NAPHTHA HGA HIGH PRESSURE STEAM HPS HOT OIL HOL HOT WATER HTW HYDROGEN HYDHYDROGEN HYD INDUSTRIAL AIR UTA INSTRUMENT AIR INA KEROSENE KER LIGHT GASOIL LGO LIGHT HARD WAX LHW LIGHT NAPHTHA LGA LIGHT SOFT WAX LSW LIQUID POLYETHYLENE LP LIQUID SULPHUR AZU LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG LUBE OIL ACI LUBE OIL BASIS BAS LUBRICATING OIL LMO MEDIUM HARD WAX MHW MEDIUM SOFT WAX MSW MICROCRISTALLINE HARD WAX CHW ECP-VST-G-GEN-FT-001 442/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 15-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AA1A33-01 FLANGE FINISH RF ANSI RATING ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 MICROCRISTALLINE SOFT WAX CSW NAPHTHENIC CRUDE CRN NATURAL GAS NTG OILY WATER OEW OILY WATER SEWER OSW PLATFORMADO PLT POLYETHYLENE + ETHYLENE LPE PROPYLENE PPN QUENCH OIL QHO RAW WATER RAWRAW WATER RAW REFORMATE REF RESIDUE CRUDE CRR SANITARY SEWER SSW SEAL OIL SEO SEWER EWS SLOP SLP SLOP. HEAVY SLOP SLH SO2 GAS SO2 SOFTENED WATER SWA VERY LOW PRESSURE STEAM LLS WASTE WATER WWT COOLING WATER - RETURN CWR COOLING WATER - SUPPLY CWS CRUDE CRU DIESEL DSO FUEL GAS FUG FUEL OIL FUO ECP-VST-G-GEN-FT-001 443/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 15-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AA1A33-01 FLANGE FINISH RF ANSI RATING ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 GLYCOL GLI HEAVY FUEL OIL HFO HYDROCARBONS VAPORS (HC VAPORS) VAP LOW PRESSURE CONDENSATE LPC LOW PRESSURE STEAM LPS METHANOL MET NAPHTA NAP NITROGEN NIT PRODUCED WATER PWA PROPANE PR FLARE FLA CLOSE DRAIN CLD TREATED WATER TWA DILUTED PRODUCED FLUID DPF ASOCIATED GAS ASG OIL AND WATER MIXTURE CRW OPEN DRAIN DO PRODUCED FLUID PFL MEG MG DILUENT DIL ATMOSPHERIC VENT VA BLANKETING GAS BLG MUD LOD MEDIUM PRESSURE CONDENSATE MPC MEDIUM PRESSURE STEAM MPS NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 444/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 15-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AA1A33-01 FLANGE FINISH RF ANSI RATING ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 ECP-VST-G-GEN-FT-001 445/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AA1A33-01 1/2 2 800# SW GA04F0B2 COMPONENTS DESCRIPTION CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 2 GATE VALVE AA1A33-01 1/2 1 1/2 800# FTH GA04H0B2 3 GATE VALVE AA1A33-01 1/2 1 1/2 800# PE x FTH GA04K0B2 4 GATE VALVE AA1A33-01 2 12 150# RF GA01A0B1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A-105, ACCCORDING TO API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL OPERATOR. CARBON STEEL, GATE VLV EXT.FEM.END W/1NIP RB, ASTM A-105, ACCCORDING TO API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, WITH 6" NIPPLES WELDED +A106 GR B+SCH160 CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE FLEXIBLE WEDGE STELLITE RENEWABLE SEAT RINGS GRAPHITE 5 GATE VALVE AA1A33-01 2 24 150# RF GA01A0B3 6 GATE VALVE AA1A33-01 14 24 150# RF GA01A0B1 CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, ACCORDING TO API 600 / API 6D FOR FLG ASME B16 47 SERIES B BODY/BONNET: YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, HANDWHEEL (2" - 12"), GEAR OPERATOR (14"-24") 7 GATE VALVE AA1A33-01 26 36 150# RF GA01A0B1 API 600 / API 6D FOR FLG ASME B16.47 SERIES B, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. ECP-VST-G-GEN-FT-001 446/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 8 CHECK VALVE AA1A33-01 1/2 2 800# SW CL04F0B2 CARBON STEEL, (LIFT) SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT. ACC. TO API 602 CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND 9 CHECK VALVE AA1A33-01 3 24 150# RF CK01A0B1 10 GLOBE VALVE AA1A33-01 1/2 2 800# SW GL04F0B2 11 GLOBE VALVE AA1A33-01 1 1 150# RF GL01A0B2 CARBON STEEL GLOBE VALVE ASTM A 216 GR WCB DIMENSIONS AS CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34/API 602, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, DIMENSIONS AS PER API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL 12 GLOBE VALVE AA1A33-01 2 12 150# RF GL01A0B2 13 GLOBE VALVE AA1A33-01 10 20 150# RF GL01A0B2 14 BUTTERFLY VALVE AA1A33-01 2 12 150# RF BT01A0I2 15 BUTTERFLY VALVE AA1A33-01 14 24 150# RF BT01A0I2 CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34/BS 1873, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, DIMENSIONS AS PER BS 1873/ASME B16.34, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A- 216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A- 216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATORTESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR ECP-VST-G-GEN-FT-001 447/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 16 BALL VALVE AA1A33-01 1/2 2 800# THD BA04H0B1 CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET 17 BALL VALVE AA1A33-01 1/2 2 800# SW BA04F0B1 18 BALL VALVE AA1A33-01 1/2 1 1/2 800# PE BA04G0I2J 19 BALL VALVE AA1A33-01 2 12 150# RF BA01A0B1 20 BALL VALVE AA1A33-01 2 6 150# RF BA01A0I2J CARBON STEEL, BALL VLV EXT.FEM.END W/2NIP RB, REDUCED BORE, ASTM A-105, CONSTRUCTION AS PER ASME B 16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: FLOATING TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: 6" NIPPLES WELDED +A106 GR B+SCH160 CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A- 216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR CARBON STEEL, BALL VALVE LP RB, TRUNNION MOUNTED, REDUCED BORE, ASTM A216 GR. WCB, CONSTRUCTION AS PER ASME B 16.34/API 608, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 21 BALL VALVE AA1A33-01 14 24 150# RF BA01A0I1J 22 BALL VALVE AA1A33-01 26 36 150# RF BA01A0I1J 23 BALL VALVE AA1A33-01 8 24 150# RF BA01A0I2J CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A- 216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, FIRE SAFE: API 607/ API 6FA. CONSTRUCTION AS PER ASME B 16.34/API 6D, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR. TESTS AS PER API 598. , , , ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TESTS. CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A- 216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16.47 SERIE B, FIRE SAFE: API 607/ API 6FA. CONSTRUCTION AS PER ASME B 16.34/API 6D, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR. TESTS AS PER API 598. CARBON STEEL, BALL VALVE LP RB, TRUNNION MOUNTED, REDUCED BORE, ASTM A216 GR. WCB, CONSTRUCTION AS PER ASME B 16.34/API 6D, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS.OPERATION: GEAR, COMMENT: API 598 TESTS. ECP-VST-G-GEN-FT-001 448/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 24 PLUG VALVE AA1A33-01 3 12 150# RF PL01A0B2 CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, RB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 25 PLUG VALVE AA1A33-01 14 24 150# RF PL01A0B2 26 PIPE AA1A33-01 1/2 1 1/2 PE 160 T-01 27 PIPE AA1A33-01 2 2 BE 80 T-01 28 PIPE AA1A33-01 3 6 BE STD T-01 29 PIPE AA1A33-01 8 24 BE 20 T-01 CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, RB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" 30 PIPE AA1A33-01 26 28 BE STD 31 PIPE AA1A33-01 30 36 BE 20 32 PIPE AA1A33-01 42 42 BE API 0,562 T-01 33 ELBOW 45 DEGREES AA1A33-01 1/2 3/4 6000# SW ACCORDING TO PIPE SCHEDULE A-01 34 ELBOW 45 DEGREES AA1A33-01 1 1 1/2 3000# SW ACCORDING TO PIPE SCHEDULE A-01 35 ELBOW 45 DEGREES AA1A33 01 2 24 BW ACCORDING TO A 02 CARBON STEEL, E.F.W. PIPE, ASTM A672 GR. C70 CL.12, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.F.W. PIPE, ASTM A672 GR. C70 CL.12, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.F.W. D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB DIMENSIONS AS PER ASME B16 9 BEVELED ENDS AS PER ASME RANDOM LENGHT >=2 35 ELBOW 45 DEGREES AA1A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 36 ELBOW 45 DEGREES AA1A33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 37 ELBOW 45 DEGREES AA1A33-01 42 42 BW ACCORDING TO PIPE SCHEDULE A-03 38 ELBOW 90 DEGREES AA1A33-01 1/2 3/4 6000# SW ACCORDING TO PIPE SCHEDULE A-01 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS,MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 449/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 39 ELBOW 90 DEGREES AA1A33-01 1 1 1/2 3000# SW ACCORDING TO PIPE SCHEDULE A-01 40 ELBOW 90 DEGREES AA1A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL ELBOW 90 DEGREES LONG RADIUS ASTM A 234 GR 41 ELBOW 90 DEGREES AA1A33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 42 ELBOW 90 DEGREES AA1A33-01 42 42 BW ACCORDING TO PIPE SCHEDULE A-03 2 4 1/2 2 1/2 2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS,MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, BEVELED END AS PER ASME B16.25, THREADED END AS PER ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS. CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY 43 CONCENTRIC REDUCER BW x PE ACCORDING TO PIPE SCHEDULE 44 PE x PE 160 A-02 A-02AA1A33-01 BW x MTH XXS A-02CONCENTRIC REDUCER AA1A33-01 46 CONCENTRIC REDUCER AA1A33-01 45 CONCENTRIC REDUCER AA1A33-01 A-02PE x MTH XXS 3 24 2 20 26 36 18 30 42 42 30 36 3 4 1/2 2 3/4 1 1/2 1/2 1 3 24 2 22 26 36 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CONCENTRIC REDUCER AA1A33-01 BW X BW A-02 ACCORDING TO CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, 48 ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-02 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 47 CONCENTRIC REDUCER AA1A33-01 BW X BW ACCORDING TO PIPE SCHEDULE A-02 A-03 ECCENTRIC REDUCER50 AA1A33-01 BW x PE A-02 49 CONCENTRIC REDUCER AA1A33-01 BW X BW ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE 51 ECCENTRIC REDUCER AA1A33-01 A-02 BW x BW ACCORDING TO PIPE SCHEDULE PE x MTH XXS 52 ECCENTRIC REDUCER AA1A33-01 26 36 18 30 53 ECCENTRIC REDUCER AA1A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY A-02 ECP-VST-G-GEN-FT-001 450/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 42 42 30 36 55 REDUCER INSERT AA1A33-01 1/2 2 3000# MxF CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL CAP ASTM A 105 DIMENSIONS AS PER ASME B16 11 ECCENTRIC REDUCER AA1A33-01 A-03BW X BW ACCORDING TO PIPE SCHEDULE54 56 CAP AA1A33-01 1/2 3/4 6000# THD A-01 57 CAP AA1A33-01 1 2 3000# THD A-01 58 CAP AA1A33-01 1/2 3/4 6000# SW A-01 59 CAP AA1A33-01 1 1 1/2 3000# SW A-01 60 CAP AA1A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 61 STRAIGHT TEE AA1A33-01 1/2 3/4 6000# SW A-01 3/4 1 1/2 1/2 3/4 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 62 REDUCER TEE AA1A33-01 6000# SW x SW A-01 1/2 3/4 1 1/2 1 1/2 1 1 1/2 64 STRAIGHT TEE AA1A33-01 1 1 1/2 3000# SW A-01 65 STRAIGHT TEE AA1A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 3 24 2 22 67 STRAIGHT TEE AA1A33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 26 36 16 30 68 REDUCER TEE AA1A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 A-02ACCORDING TO PIPE SCHEDULE A-02 66 REDUCER TEE 63 REDUCER TEE AA1A33-01 3000# SW x SW A-01 AA1A33-01 BW x BW CARBON STEEL, STRAIGHT TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 451/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 42 42 30 36 70 STRAIGHT TEE AA1A33-01 42 42 BW ACCORDING TO PIPE SCHEDULE A-03 1 2 71 OLET AA1A33 01 3000# BW x THD CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- A-03ACCORDING TO PIPE SCHEDULE A 01 69 REDUCER TEE AA1A33-01 BW x BW 1/2 1 1/2 2 24 1/2 1 1/2 26 36 1/2 1 1/2 42 42 1/2 1 1/2 2 42 1/2 3/4 2 24 1 1 1/2 6 24 73 OLET AA1A33-01 3000# BW x SW ACCORDING TO PIPE SCHEDULE 72 OLET AA1A33-01 3000# BW x SW ACCORDING TO PIPE SCHEDULE 71 OLET AA1A33-01 3000# BW x THD CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, ELBOLET FOR SR ELBOW, ASTM A105, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, SOCKOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS- SP-97, BEVELED END AS PER ASME B16.25, SOCKET WELDING END AS PER ASME B16.11 , , , 97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY OLET AA1A33-01 3000# BW x SW ACCORDING TO PIPE SCHEDULE A-01 A-01 74 OLET AA1A33-01 3000# BW x SW ACCORDING TO PIPE SCHEDULE BW x SW A-03ACCORDING TO PIPE SCHEDULE A-01 A-01 A-01 75 OLET AA1A33-01 6000# 76 6 24 2 12 26 36 12 16 42 42 2 16 80 PLUG AA1A33-01 1/2 2 3000# THD 81 COUPLING AA1A33-01 1/2 3/4 6000# THD A-01 A-02 77 OLET AA1A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 A-02 78 OLET AA1A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS- SP-97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED END AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY A-03ACCORDING TO PIPE SCHEDULEBW x BW79 OLET AA1A33-01 ECP-VST-G-GEN-FT-001 452/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 82 COUPLING AA1A33-01 1 2 3000# THD A-01 83 COUPLING AA1A33-01 1/2 3/4 6000# SW x FTH A-01 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 84 COUPLING AA1A33-01 1 1 1/2 3000# SW x FTH A-01 85 COUPLING AA1A33-01 1/2 3/4 6000# SW A-01 86 COUPLING AA1A33-01 1 1 1/2 3000# SW A-01 87 HALF COUPLING AA1A33-01 1/2 2 3000# THD A-01 88 HALF COUPLING AA1A33-01 1/2 2 3000# SW A-01 89 NIPPLE AA1A33-01 1/2 2 THD ACCORDING TO PIPE SCHEDULE T-01 90 NIPPLE AA1A33-01 1/2 1 1/2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, FOR L = 100 & 200 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME , , , B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 PIPE SCHEDULE 91 NIPPLE AA1A33-01 1/2 2 PE ACCORDING TO PIPE SCHEDULE T-01 92 FLANGE AA1A33-01 1/2 1 1/2 150# RF ACCORDING TO PIPE SCHEDULE B-01 93 FLANGE AA1A33-01 2 24 150# RF ACCORDING TO PIPE SCHEDULE B-02 94 FLANGE AA1A33-01 26 36 150# RF ACCORDING TO PIPE SCHEDULE B-02 95 FLANGE AA1A33-01 42 42 150# RF ACCORDING TO PIPE SCHEDULE B-04 96 FLANGE AA1A33-01 1 1/2 2 300# RF ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END, 100% X-RAY CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, LONG WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER MANUFACTURER'S STD, RAISED FACE FLANGED , B1.20.1, NPT, FOR L = 100 & 200 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, FOR L=100 & 200 mm CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 96 FLANGE AA1A33 01 1 1/2 2 300# RF PIPE SCHEDULE 97 FLANGE AA1A33-01 2 24 300# RF ACCORDING TO PIPE SCHEDULE B-02 DIMENSIONS AS PER MANUFACTURER S STD, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 453/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 98 FLANGE AA1A33-01 2 24 600# FF ACCORDING TO PIPE SCHEDULE B-02 99 BLIND FLANGE AA1A33-01 1/2 24 150# RF B-03 100 BLIND FLANGE AA1A33 01 1/2 2 150# RF B 03 CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16 5 RAISED FACE FLANGED END FLG x FTH PROVIDED WITH 1/2" CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 100 BLIND FLANGE AA1A33-01 1/2 2 150# RF B-03 101 BLIND FLANGE AA1A33-01 30 42 150# RF B-03 102 BLIND FLANGE AA1A33-01 1/2 24 300# RF B-03 103 ORIFICE FLANGE AA1A33-01 1/2 2 300# RF ACCORDING TO PIPE SCHEDULE 104 ORIFICE FLANGE AA1A33-01 3 8 300# RF ACCORDING TO PIPE SCHEDULE B16.5, RAISED FACE FLANGED END, FLG x FTH - PROVIDED WITH 1/2" FTHD TAPER BORE CARBON STEEL, BLIND FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 105 ORIFICE FLANGE AA1A33-01 10 24 300# RF ACCORDING TO PIPE SCHEDULE 106 BLIND PLATE AA1A33-01 14 24 150# RF 107 SPACER RING AA1A33-01 14 30 150# RF 108 PADDLE BLIND AA1A33-01 14 30 150# RF 109 FIGURE 8 AA1A33-01 1/2 12 150# RF 110 DRIP RINGS AA1A33-01 2 24 150# RF CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISE FACE ENDS; WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE 111 DRIP RINGS AA1A33-01 3/4 4 300# RF PER ASME B16.5, RAISED FACE ENDS CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ATTACHED STANDARD STC 139C-14 & 15, RAISED FACE ENDS ECP-VST-G-GEN-FT-001 454/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 112 GASKET AA1A33-01 1/2 42 150# RF E-01 113 GASKET AA1A33-01 1/2 24 300# RF E-01 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES AISI 304 SS DIMENSIONS AS PER ASME B16 20 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 / ASME B16.47 SERIE B 114 GASKET AA1A33-01 2 24 600# FF E-01 115 UNION AA1A33-01 1/2 3/4 6000# SW x FTH 116 STRAINER "Y" TYPE AA1A33-01 1/2 2 150# RF 117 STEAM TRAPS AA1A33-01 1/2 3/4 800# SW 118 BOLTING AA1A33-01 P-01 THICKNESS 1/8 INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR FLAT FACE FLANGES ASME B16.5 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.11 ALL POINTS APPLICABLE, SOCKET WELD END AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1 CARBON STEEL, STEAM TRAPS ASTM A105, THERMODYNAMIC TYPE WITH "Y" STRAINER, DIMENSIONS AS PER MANUFACTURER'S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 CARBON STEEL, STRAINER "Y" TYPE, ASTM A105 WITH 1/2" FTHD DRAIN WITH PLUG, AISI 316 SCREEN, MANUF.S STD / FLG CONN. FOR ASME B16.5, SW X FTH. ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 455/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 15-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 DILUTED PRODUCED FLUID DPF 200 260 CONDENSATE CND 300 230 NAPHTA NAP 400 200 ASOCIATED GAS ASG 500 170 PRODUCED WATER PWA 600 140 OIL AND WATER MIXTURE CRW 650 125 CRUDE CRD 700 110 FUEL GAS FUG 750 95 FLARE FLA 800 80 CLOSE DRAIN CLD 850 65 TREATED WATER TWA 900 50 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAA1A33-02 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE FF / RF ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F ECP-VST-G-GEN-FT-001 456/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS 1 GATE VALVE A1A2 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A105 0,125 F8 STELLITE INTEGRA L SS304 SPIRAL WOUND SOLID HAND WHELL A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-100 Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND SOLID HAND WHEEL VC-101 FTH INCLUIR GATE VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-102 PE x FTH (6"Nipples welded + A106Gr B + Sch 160) INCLUIR CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA 2 GATE VALVE A1A2 2 1/2 12 150 RF , , , ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A216 WCB 0,125 F8 STELLITE RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E HAND WHELL A3-1F 2 - 10 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E HAND WHEEL VC-200 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 2 - 24 150# 285 250 A216 GR WCB 0,125 13%Cr + HF(Tung sten STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND Through conduit slab Type VC- 250TC FLG INCLUIR 3 GATE VALVE A1A2 14 24 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 285 100 A216 WCB 0,125 F8 STELLITE RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E GEAR A3-1F 12 - 24 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E GEAR VC-250 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 26 - 32 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND FLEXIBL E GEAR VC-250 FLG INCLUIR CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION ASTM A 105 DIMENSIONS AS PER STELLITE Diferencias en: Rango de 4 CHECK VALVE A1A2 1/2 2 800 SW INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 285 100 A105 0,125 F8 STELLITE INTEGRA L SS304 SPIRAL WOUND A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND VR-100 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL 5 CHECK VALVE A1A2 2 1/2 24 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 285 100 A216 WCB 0,125 F8 STELLITE RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND A3-1F 2 - 20 150 285 250 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND VR-200 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 457/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA 6 GLOBE VALVE A1A2 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A105 0,125 F8 STELLITE INTEGRA L SS304 SPIRAL WOUND HAND WHEEL A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND HAND WHEEL VG-100 Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL GLOBE VALVE A3-1F 1 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND HAND WHEEL VG-200 FLG INCLUIR 7 GLOBE VALVE A1A2 2 1/2 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET 285 100 A216 0 125 F8 STELLITE RENEWA BLE SS304 SPIRAL HAND A3 1F 2 8 150# 285 250 A216 GR 0 125 F6 STELLITE RENEWAB SS304 SPIRAL HAND VG 200 Diferencias en: Rango de Diámetros & Trim. Se 7 GLOBE VALVE A1A2 2 1/2 12 150 RF API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNETGASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A216 WCB 0,125 F8 BLE SEAT RINGS SPIRAL WOUND HAND WHEEL A3-1F 2 - 8 150# 285 250 A216 GR WCB 0,125 F6 RENEWAB LE SEAT RINGS SPIRAL WOUND HAND WHEEL VG-200 Diámetros & Trim. Se deja la configuración de ECOPETROL GLOBE VALVE A3-1F 10 - 20 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND GEAR VG-250 FLG INCLUIR 8 BUTTERFLY VALVE A1A2 2 1/2 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 285 100 A216 WCB 0,125 SS 316 DISC INCONEL LEVER A3-1F 9 BUTTERFLY VALVE A1A2 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 285 100 A216 WCB 0,125 SS 316 DISC INCONEL GEAR A3-1F 10 BALL VALVE A1A2 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 285 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOATIN G LEVER A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 FULL VITON SS 316 FULL PORT FLOATING LEVER VB-102 PE x FTH (6"Nipples welded + A106Gr B + Sch 160) Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 150 Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL ESTE TIPO DE VÁLVULA CUBRE LOS RANGOS DE DIÁMETROS EN LAS VÁLVULAS DE LA PIPING CLASS DE ECOPETROL EPDM GEAR VE-250285 CF8M DISC2 - 42 250 A216 GR WCB 0,125 11 BALL VALVE A1A2 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 285 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOATIN G LEVER A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 FULL VITON SS 316 FULL PORT FLOATING LEVER VB-101 PE (6"Nipples welded + A106Gr B + Sch 160) Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL BALL VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 REDUCED VITON SS 316 REDUCED PORT FLOATING LEVER VB-100 PE (6"Nipples welded + A106Gr B + Sch 160) INCLUIR 12 BALL VALVE A1A2 2 1/2 12 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 285 100 A216 WCB 0,125 F8 FULL SS 316 FULL PORT TRUNNI ON MOUNT ED HAND WHEEL A3-1F 1 - 6 150# 285 250 A216 GR WCB 0,125 FULL VITON SS 316 FULL PORT TRUNNION MOUNTED LEVER VB-201 Diferencias en: Rango de Diámetros & Operat. Se deja la configuración de ECOPETROL BALL VALVE A3-1F 2 - 6 150# 285 250 A216 GR WCB 0,125 REDUC ED VITON SS 316 REDUCED PORT LEVER VB-200 INCLUIR 13 BALL VALVE A1A2 14 24 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 285 100 A216 WCB 0,125 F8 FULL SS 316 FULL PORT TRUNNI ON MOUNT ED GEAR A3-1F 8 - 24 150# 285 250 A216 GR WCB 0,125 FULL VITON SS 316 FULL PORT TRUNNION MOUNTED GEAR VB-251 Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 458/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA BALL VALVE A3-1F 8 - 24 150# 285 250 A216 GR WCB 0,125 REDUC ED VITON SS 316 REDUCED PORT GEAR VB-250 INCLUIR 14 PLUG VALVE A1A2 2 1/2 12 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 285 100 A216 WCB 0,125 F8 SS 316 HAND WHEEL A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16 10 RAISED FACE FLANGED ENDS RATING AS 15 PLUG VALVE A1A2 14 24 150 RF B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 285 100 A216 WCB 0,125 F8 SS 316 GEAR A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 16 PIPE A1A2 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B,DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S160 - (1/2 - 3/4), S80 - (1 - 1 1/2) 285 250 A106 GR B 0,125 SEAMLESS Diferencias en: Rango de Diámetros y espesores (schedule). Se deja la configuración de ECOPETROL 17 PIPE A1A2 2 1/2 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 285 100 A106 GR B 0,125 A3-1F 18 PIPE A1A2 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 285 100 A106 GR B 0,125 A3-1F PIPE A3-1F 26 - 36 SSTD - (26 - 28); S20 - (30 - 36) 285 250 A672 GR C60 CL.12 0,125 E.F.W. - 100% X-RAY - DOUBLE RANDOM LENGHT >= 2" INCLUIR PIPE A3-1F 42 API 14,27 285 250 API 5L GR. X42 0,125 E.F.W. - GOLD FBE COATING - DOUBLE RANDOM LENGHT >= 2" INCLUIR CARBON STEEL ELBOW 45 DEGREES ASTM A 105 Diferencias en: Rango de Diferencias en: Espesores (Schedule) en los diferentes diámetros del tubo. Se deja la configuración De TIPIEL SA SEAMLESS - POLYPROPYLENE COATED - DOUBLE RANDOM LENGHT >=2" 0,125285S80 - (2); SSTD - (3 - 6); S20 - (8 - 24) 250 A106 GR B2 - 24 19 ELBOW 45 DEGREESA1A2 1/2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 45 DEGREE ELBOW FEMALE END g Diámetros y Rating. Se deja la configuración de TIPIEL SA 20 ELBOW 45 DEGREESA1A2 2 1/2 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 21 ELBOW 45 DEGREESA1A2 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F ELBOW 45 DEGREES A3-1F 26 - 36 285 250 A234 GR.WPB 0,125 45 DEGREE ELBOW LR - 100% X-RAY INCLUIR ELBOW 45 DEGREES A3-1F 42 285 250 MSS SP-75 WPHY 42 0,125 45 DEGREE ELBOW LR INCLUIR 22 ELBOW 90 DEGREESA1A2 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 90 DEGREE ELBOW FEMALE END Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 23 ELBOW 90 DEGREESA1A2 2 1/2 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 24 ELBOW 90 DEGREESA1A2 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F ELBOW 90 DEGREES A3-1F 26 - 36 285 250 A234 0 125 90 DEGREE ELBOW INCLUIR 90 DEGREE ELBOW LR 45 DEGREE ELBOW LR2 - 24 A234 GR.WPB 0,125285 0,125 A234 GR.WPB 2 - 24 250 250 285 ELBOW 90 DEGREES A3-1F 26 - 36 285 250 GR WPB 0,125 LR - 100% X-RAY INCLUIR ELBOW 90 DEGREES A3-1F 42 285 250 MSS SP-75 WPHY 42 0,125 90 DEGREE ELBOW LR INCLUIR 25 CONCENTRIC REDUCA1A2 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE CONCENTRIC REDUCER A3-1F 2 - 4 285 250 A234 GR.WPB 0,125 BW x PE - CONCENTRIC INCLUIR ECP-VST-G-GEN-FT-001 459/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA CONCENTRIC REDUCER A3-1F 1/2 - 2 S - XXS 285 250 A234 GR.WPB 0,125 BW x MTH - CONCENTRIC INCLUIR CONCENTRIC REDUCER A3-1F 3/4 - 1 1/2 285 250 A234 GR.WPB 0,125 PE x PE - CONCENTRIC INCLUIR CONCENTRIC REDUCER A3-1F 3/4 - 1 1/2 S - XXS 285 250 A234 GR.WPB 0,125 PE x MTH - CONCENTRIC INCLUIR 27 CONCENTRIC REDUCA1A2 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 3 - 24 285 250 A234 GR.WPB 0,125 Diferencias en: Rango de Diámetros. Se deja la configuración de TIPIEL SA CONCENTRIC REDUCER A3-1F 26 - 36 285 250 A234 GR WPB 0,125 BW x BW- CONCENTRIC INCLUIR 28 ECCENTRIC REDUCEA1A2 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE ECCENTRIC REDUCER A3-1F 3 - 4 285 250 A234 GR.WPB 0,125 BW x PE - ECCENTRIC SWAGE INCLUIR ECCENTRIC REDUCER A3-1F 3/4 - 1 1/2 S - XXS 285 250 A234 G 0 125 PE x MTH - ECCENTRIC INCLUIRECCENTRIC REDUCER A3-1F 3/4 - 1 1/2 S - XXS 285 250 GR.WPB 0,125 ECCENTRIC REDUCING NIPPLE INCLUIR 29 ECCENTRIC REDUCEA1A2 2 1/2 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 30 ECCENTRIC REDUCEA1A2 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F ECCENTRIC REDUCER A3-1F 26 - 36 285 250 A234 GR.WPB 0,125 BW x BW- ECCENTRIC INCLUIR 31 REDUCER INSERT A1A2 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 32 CAP A1A2 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 FTH - CAP FORGED Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 33 CAP A1A2 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 SW - CAP FORGED Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 34 CAP A1A2 2 1/2 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 35 CAP A1A2 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25 285 100 A234 GR WPB 0,125 A3-1F BW - CAP250 250 A234 GR.WPB 0,125 A234 GR.WPB 0,125285 3 - 24 285 2 - 24 PER ASME B16.25 WPB 36 STRAIGHT AND RED A1A2 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 TEE: 6000# - (1/2 -3/4); 3000# - (1 - 1 1/2); TEER: 6000# - (3/4 - 1 1/2) 285 250 A105 0,125 Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 37 STRAIGHT AND RED A1A2 2 1/2 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 38 STRAIGHT AND RED A1A2 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F STRAIGHT AND REDUCER TEE A3-1F 26 - 36 285 250 A234 GR.WPB 0,125 100% X-RAY INCLUIR STRAIGHT TEE A3-1F 42 285 250 MSS SP-75 WPHY 42 0,125 EQUAL TEE INCLUIR 39 OLET A1A2 1/2 2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 40 OLET A1A2 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 250 A234 GR.WPB 0,1252 - 24 285 ECP-VST-G-GEN-FT-001 460/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA OLET A3-1F 2 - 24 3000# 285 250 A105 0,125 BW x SW- ELBOLET FOR SR ELBOW INCLUIR OLET A3-1F 2 - 42 6000#; 3000# 285 250 A105 0,125 BW x SW - SOCKOLET INCLUIR 41 OLET A1A2 2 1/2 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 42 OLET A1A2 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 43 PLUG A1A2 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 285 250 A105 0,125 MTH - PLUG - ROUND HEAD TYPE 44 COUPLING A1A2 1/2 2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 FHT - COUPLING Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA BW x BW WELDOLET285 250 A105 0,1253 - 42 COUPLING A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 SW x FTH - COUPLING INCLUIR 45 COUPLING A1A2 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 46 HALF COUPLING A1A2 1/2 2 3000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 3000# 285 250 A105 0,125 PE x FTH Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 47 HALF COUPLING A1A2 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 3000# 285 250 A105 0,125 PE x SW Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 48 NIPPLE A1A2 1/2 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S-XXS 285 250 A106 GR B 0,125 MTH - LENGTH = 100 mm Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL NIPPLE A3-1F 1/2 - 1 1/2 S-XXS 285 250 A106 GR B 0,125 PE x MTH; PARA LONGITUDES DE: INCLUIR 49 NIPPLE A1A2 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S-160 285 250 A106 GR B 0,125 PARA LONGITUDES DE: 100 y 200 mm Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 50 FLANGE A1A2 1/2 2 150 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 150# 285 250 A105 0,125 FLG x SW 51 FLANGE A1A2 2 1/2 8 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,125 A3-1F 2 - 24 150# 285 250 0 125A105 FLG x BW 52 FLANGE A1A2 10 24 150 RF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,125 A3-1F FLANGE A3-1F 26 - 36 150# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 42 150# 285 250 A694 F42 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 1 1/2 - 2 300# 285 250 A105 0,125 FLG x PE - LONG WELDNECK FLANGE INCLUIR FLANGE A3-1F 2 - 24 300# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 2 - 24 600# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR 53 BLIND FLANGE A1A2 1/2 24 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,125 A3-1F 1/2 - 24 150 # 285 250 A105 0,125 BLIND FLANGE A3-1F 1/2 - 2 150 # 285 250 A105 0,125 FLG x FTH - PROVIDED WITH 1/2" INCLUIR BLIND FLANGE A3-1F 30 - 42 150 # 285 250 A694 F42 0,125 FLG INCLUIR BLIND FLANGE A3-1F 1/2 - 24 300 # 285 250 A105 0,125 FLG INCLUIR 54 ORIFICE FLANGE A1A2 1/2 2 300 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 2 - 24 150# 285 250 0,125A105 FLG x BW ECP-VST-G-GEN-FT-001 461/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA 55 ORIFICE FLANGE A1A2 2 1/2 8 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F 56 ORIFICE FLANGE A1A2 10 24 300 RF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F CARBON STEEL BLIND PLATE ASTM A 516 GR 70 A516 GR A105250 0,125 FLG x BW - Couple orif.wn-flg 1/2" th-ta300# 2852 - 24 57 BLIND PLATE A1A2 14 24 150 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 14 - 24 150# 285 250 A516 GR. 70 0,125 PADDLE BLIND 58 SPACER RING A1A2 14 24 150 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 14 - 24 150# 285 250 A516 GR. 70 0,125 59 FIGURE 8 A1A2 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 1/2 - 12 150# 285 250 A516 GR. 70 0,125 60 DRIP RINGS A1A2 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 3/4 - 4 150# 285 250 A516 GR. 70 0,125 Drip ring 3/4" thd tap DRIP RINGS A3-1F 3/4 - 4 300# 285 250 A516 GR. 70 0,125 Drip ring 3/4" thd tap INCLUIR 61 GASKET A1A2 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 285 100 SS304 0,125 A3-1F 1/2 - 42 150# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - FLEXITALLIC CG, 1/8" THK GASKET A3-1F 1/2 - 42 300# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - INCLUIR GASKET A3-1F 1/2 - 24 600# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - INCLUIR UNION A3-1F 1/2 - 3/4 6000# 285 250 0,125 SW x FTH INCLUIR STRAINER "Y" TYPE A3-1F 1/2 - 2 150# 285 250 A105 0,125 FLG - 1/2" FTHD DRAIN WITH PLUG INCLUIR STEAM TRAPS A3-1F 1/2 - 3/4 800# 285 250 A105 0,125 SW - THERMODYNAMIC INCLUIRTHERMODYNAMIC 62 BOLTING A1A2 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 285 100 A193 GR B7 0,125 A3-1F 285 250 STUD A193 GR B7 / NUTS A194 GR 2H 0,125 NOTES: AMARILLO GRIS OSCUPO GRIS CLARO BLANCO ITEMS QUE SON IGUALES ITEMS NUEVOS EN CLASES CONTRATO ITEMS QUE NO EXISTEN EN CLASES CO ITEMS QUE HAY DIFERENCIA CON RELA ECP-VST-G-GEN-FT-001 462/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 15-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 DILUTED PRODUCED FLUID DPF 200 260 CONDENSATE CND 300 230 NAPHTA NAP 400 200 ASOCIATED GAS ASG 500 170 PRODUCED WATER PWA 600 140 OIL AND WATER MIXTURE CRW FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE FF / RF ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAA1A33-02 650 125 CRUDE CRD 700 110 FUEL GAS FUG 750 95 FLARE FLA 800 80 CLOSE DRAIN CLD 850 65 TREATED WATER TWA 900 50 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- ASTM A-350 GR. LF6 Cl. 1, NOT TO BE USED OVER 500 °F ECP-VST-G-GEN-FT-001 463/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 ASTM A106 GR. B DATE: 15-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE FF / RF ASTM A672 GR C70 CL.12 / API 5L GR X42 ONLY FOR 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAA1A33-02 ECP-VST-G-GEN-FT-001 464/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS 1 GATE VALVE A1A2 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A105 0,125 F8 STELLITE INTEGRA L SS304 SPIRAL WOUND SOLID HAND WHELL A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-100 Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND SOLID HAND WHEEL VC-101 FTH INCLUIR GATE VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-102 PE x FTH (6"Nipples welded + A106Gr B + Sch 160) INCLUIR CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA 2 GATE VALVE A1A2 2 1/2 12 150 RF , , , ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A216 WCB 0,125 F8 STELLITE RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E HAND WHELL A3-1F 2 - 10 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E HAND WHEEL VC-200 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 2 - 24 150# 285 250 A216 GR WCB 0,125 13%Cr + HF(Tung sten STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND Through conduit slab Type VC- 250TC FLG INCLUIR 3 GATE VALVE A1A2 14 24 150 RF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 285 100 A216 WCB 0,125 F8 STELLITE RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E GEAR A3-1F 12 - 24 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E GEAR VC-250 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 26 - 32 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND FLEXIBL E GEAR VC-250 FLG INCLUIR CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION ASTM A 105 DIMENSIONS AS PER STELLITE Diferencias en: Rango de 4 CHECK VALVE A1A2 1/2 2 800 SW INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 285 100 A105 0,125 F8 STELLITE INTEGRA L SS304 SPIRAL WOUND A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND VR-100 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL 5 CHECK VALVE A1A2 2 1/2 24 150 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 285 100 A216 WCB 0,125 F8 STELLITE RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND A3-1F 2 - 20 150 285 250 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND VR-200 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 465/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA 6 GLOBE VALVE A1A2 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A105 0,125 F8 STELLITE INTEGRA L SS304 SPIRAL WOUND HAND WHEEL A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND HAND WHEEL VG-100 Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL GLOBE VALVE A3-1F 1 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND HAND WHEEL VG-200 FLG INCLUIR 7 GLOBE VALVE A1A2 2 1/2 12 150 RF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET 285 100 A216 0 125 F8 STELLITE RENEWA BLE SS304 SPIRAL HAND A3 1F 2 8 150# 285 250 A216 GR 0 125 F6 STELLITE RENEWAB SS304 SPIRAL HAND VG 200 Diferencias en: Rango de Diámetros & Trim. Se 7 GLOBE VALVE A1A2 2 1/2 12 150 RF API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNETGASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A216 WCB 0,125 F8 BLE SEAT RINGS SPIRAL WOUND HAND WHEEL A3-1F 2 - 8 150# 285 250 A216 GR WCB 0,125 F6 RENEWAB LE SEAT RINGS SPIRAL WOUND HAND WHEEL VG-200 Diámetros & Trim. Se deja la configuración de ECOPETROL GLOBE VALVE A3-1F 10 - 20 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND GEAR VG-250 FLG INCLUIR 8 BUTTERFLY VALVE A1A2 2 1/2 12 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR 285 100 A216 WCB 0,125 SS 316 DISC INCONEL LEVER A3-1F 9 BUTTERFLY VALVE A1A2 14 24 150 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 285 100 A216 WCB 0,125 SS 316 DISC INCONEL GEAR A3-1F 10 BALL VALVE A1A2 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 285 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOATIN G LEVER A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 FULL VITON SS 316 FULL PORT FLOATING LEVER VB-102 PE x FTH (6"Nipples welded + A106Gr B + Sch 160) Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 150 Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL ESTE TIPO DE VÁLVULA CUBRE LOS RANGOS DE DIÁMETROS EN LAS VÁLVULAS DE LA PIPING CLASS DE ECOPETROL EPDM GEAR VE-250285 CF8M DISC2 - 42 250 A216 GR WCB 0,125 11 BALL VALVE A1A2 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 285 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOATIN G LEVER A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 FULL VITON SS 316 FULL PORT FLOATING LEVER VB-101 PE (6"Nipples welded + A106Gr B + Sch 160) Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL BALL VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 REDUCED VITON SS 316 REDUCED PORT FLOATING LEVER VB-100 PE (6"Nipples welded + A106Gr B + Sch 160) INCLUIR 12 BALL VALVE A1A2 2 1/2 12 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 285 100 A216 WCB 0,125 F8 FULL SS 316 FULL PORT TRUNNI ON MOUNT ED HAND WHEEL A3-1F 1 - 6 150# 285 250 A216 GR WCB 0,125 FULL VITON SS 316 FULL PORT TRUNNION MOUNTED LEVER VB-201 Diferencias en: Rango de Diámetros & Operat. Se deja la configuración de ECOPETROL BALL VALVE A3-1F 2 - 6 150# 285 250 A216 GR WCB 0,125 REDUC ED VITON SS 316 REDUCED PORT LEVER VB-200 INCLUIR 13 BALL VALVE A1A2 14 24 150 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 285 100 A216 WCB 0,125 F8 FULL SS 316 FULL PORT TRUNNI ON MOUNT ED GEAR A3-1F 8 - 24 150# 285 250 A216 GR WCB 0,125 FULL VITON SS 316 FULL PORT TRUNNION MOUNTED GEAR VB-251 Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 466/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA BALL VALVE A3-1F 8 - 24 150# 285 250 A216 GR WCB 0,125 REDUC ED VITON SS 316 REDUCED PORT GEAR VB-250 INCLUIR 14 PLUG VALVE A1A2 2 1/2 12 150 RF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 285 100 A216 WCB 0,125 F8 SS 316 HAND WHEEL A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16 10 RAISED FACE FLANGED ENDS RATING AS 15 PLUG VALVE A1A2 14 24 150 RF B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 285 100 A216 WCB 0,125 F8 SS 316 GEAR A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 16 PIPE A1A2 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B,DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S160 - (1/2 - 3/4), S80 - (1 - 1 1/2) 285 250 A106 GR B 0,125 SEAMLESS Diferencias en: Rango de Diámetros y espesores (schedule). Se deja la configuración de ECOPETROL 17 PIPE A1A2 2 1/2 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 285 100 A106 GR B 0,125 A3-1F 18 PIPE A1A2 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 285 100 A106 GR B 0,125 A3-1F PIPE A3-1F 26 - 36 SSTD - (26 - 28); S20 - (30 - 36) 285 250 A672 GR C60 CL.12 0,125 E.F.W. - 100% X-RAY - DOUBLE RANDOM LENGHT >= 2" INCLUIR PIPE A3-1F 42 API 14,27 285 250 API 5L GR. X42 0,125 E.F.W. - GOLD FBE COATING - DOUBLE RANDOM LENGHT >= 2" INCLUIR CARBON STEEL ELBOW 45 DEGREES ASTM A 105 Diferencias en: Rango de Diferencias en: Espesores (Schedule) en los diferentes diámetros del tubo. Se deja la configuración De TIPIEL SA SEAMLESS - POLYPROPYLENE COATED - DOUBLE RANDOM LENGHT >=2" 0,125285S80 - (2); SSTD - (3 - 6); S20 - (8 - 24) 250 A106 GR B2 - 24 19 ELBOW 45 DEGREESA1A2 1/2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 45 DEGREE ELBOW FEMALE END g Diámetros y Rating. Se deja la configuración de TIPIEL SA 20 ELBOW 45 DEGREESA1A2 2 1/2 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 21 ELBOW 45 DEGREESA1A2 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F ELBOW 45 DEGREES A3-1F 26 - 36 285 250 A234 GR.WPB 0,125 45 DEGREE ELBOW LR - 100% X-RAY INCLUIR ELBOW 45 DEGREES A3-1F 42 285 250 MSS SP-75 WPHY 42 0,125 45 DEGREE ELBOW LR INCLUIR 22 ELBOW 90 DEGREESA1A2 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 90 DEGREE ELBOW FEMALE END Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 23 ELBOW 90 DEGREESA1A2 2 1/2 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 24 ELBOW 90 DEGREESA1A2 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F ELBOW 90 DEGREES A3-1F 26 - 36 285 250 A234 0 125 90 DEGREE ELBOW INCLUIR 90 DEGREE ELBOW LR 45 DEGREE ELBOW LR2 - 24 A234 GR.WPB 0,125285 0,125 A234 GR.WPB 2 - 24 250 250 285 ELBOW 90 DEGREES A3-1F 26 - 36 285 250 GR WPB 0,125 LR - 100% X-RAY INCLUIR ELBOW 90 DEGREES A3-1F 42 285 250 MSS SP-75 WPHY 42 0,125 90 DEGREE ELBOW LR INCLUIR 25 CONCENTRIC REDUCA1A2 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE CONCENTRIC REDUCER A3-1F 2 - 4 285 250 A234 GR.WPB 0,125 BW x PE - CONCENTRIC INCLUIR ECP-VST-G-GEN-FT-001 467/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA CONCENTRIC REDUCER A3-1F 1/2 - 2 S - XXS 285 250 A234 GR.WPB 0,125 BW x MTH - CONCENTRIC INCLUIR CONCENTRIC REDUCER A3-1F 3/4 - 1 1/2 285 250 A234 GR.WPB 0,125 PE x PE - CONCENTRIC INCLUIR CONCENTRIC REDUCER A3-1F 3/4 - 1 1/2 S - XXS 285 250 A234 GR.WPB 0,125 PE x MTH - CONCENTRIC INCLUIR 27 CONCENTRIC REDUCA1A2 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 3 - 24 285 250 A234 GR.WPB 0,125 Diferencias en: Rango de Diámetros. Se deja la configuración de TIPIEL SA CONCENTRIC REDUCER A3-1F 26 - 36 285 250 A234 GR WPB 0,125 BW x BW- CONCENTRIC INCLUIR 28 ECCENTRIC REDUCEA1A2 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE ECCENTRIC REDUCER A3-1F 3 - 4 285 250 A234 GR.WPB 0,125 BW x PE - ECCENTRIC SWAGE INCLUIR ECCENTRIC REDUCER A3-1F 3/4 - 1 1/2 S - XXS 285 250 A234 G 0 125 PE x MTH - ECCENTRIC INCLUIRECCENTRIC REDUCER A3-1F 3/4 - 1 1/2 S - XXS 285 250 GR.WPB 0,125 ECCENTRIC REDUCING NIPPLE INCLUIR 29 ECCENTRIC REDUCEA1A2 2 1/2 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 30 ECCENTRIC REDUCEA1A2 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F ECCENTRIC REDUCER A3-1F 26 - 36 285 250 A234 GR.WPB 0,125 BW x BW- ECCENTRIC INCLUIR 31 REDUCER INSERT A1A2 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 32 CAP A1A2 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 FTH - CAP FORGED Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 33 CAP A1A2 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 SW - CAP FORGED Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 34 CAP A1A2 2 1/2 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 35 CAP A1A2 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25 285 100 A234 GR WPB 0,125 A3-1F BW - CAP250 250 A234 GR.WPB 0,125 A234 GR.WPB 0,125285 3 - 24 285 2 - 24 PER ASME B16.25 WPB 36 STRAIGHT AND RED A1A2 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 TEE: 6000# - (1/2 -3/4); 3000# - (1 - 1 1/2); TEER: 6000# - (3/4 - 1 1/2) 285 250 A105 0,125 Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 37 STRAIGHT AND RED A1A2 2 1/2 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 38 STRAIGHT AND RED A1A2 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F STRAIGHT AND REDUCER TEE A3-1F 26 - 36 285 250 A234 GR.WPB 0,125 100% X-RAY INCLUIR STRAIGHT TEE A3-1F 42 285 250 MSS SP-75 WPHY 42 0,125 EQUAL TEE INCLUIR 39 OLET A1A2 1/2 2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 40 OLET A1A2 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 250 A234 GR.WPB 0,1252 - 24 285 ECP-VST-G-GEN-FT-001 468/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA OLET A3-1F 2 - 24 3000# 285 250 A105 0,125 BW x SW- ELBOLET FOR SR ELBOW INCLUIR OLET A3-1F 2 - 42 6000#; 3000# 285 250 A105 0,125 BW x SW - SOCKOLET INCLUIR 41 OLET A1A2 2 1/2 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 42 OLET A1A2 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 43 PLUG A1A2 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 285 250 A105 0,125 MTH - PLUG - ROUND HEAD TYPE 44 COUPLING A1A2 1/2 2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 FHT - COUPLING Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA BW x BW WELDOLET285 250 A105 0,1253 - 42 COUPLING A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 SW x FTH - COUPLING INCLUIR 45 COUPLING A1A2 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 46 HALF COUPLING A1A2 1/2 2 3000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 3000# 285 250 A105 0,125 PE x FTH Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 47 HALF COUPLING A1A2 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 3000# 285 250 A105 0,125 PE x SW Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 48 NIPPLE A1A2 1/2 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S-XXS 285 250 A106 GR B 0,125 MTH - LENGTH = 100 mm Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL NIPPLE A3-1F 1/2 - 1 1/2 S-XXS 285 250 A106 GR B 0,125 PE x MTH; PARA LONGITUDES DE: INCLUIR 49 NIPPLE A1A2 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S-160 285 250 A106 GR B 0,125 PARA LONGITUDES DE: 100 y 200 mm Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 50 FLANGE A1A2 1/2 2 150 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 150# 285 250 A105 0,125 FLG x SW 51 FLANGE A1A2 2 1/2 8 150 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,125 A3-1F 2 - 24 150# 285 250 0 125A105 FLG x BW 52 FLANGE A1A2 10 24 150 RF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,125 A3-1F FLANGE A3-1F 26 - 36 150# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 42 150# 285 250 A694 F42 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 1 1/2 - 2 300# 285 250 A105 0,125 FLG x PE - LONG WELDNECK FLANGE INCLUIR FLANGE A3-1F 2 - 24 300# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 2 - 24 600# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR 53 BLIND FLANGE A1A2 1/2 24 150 RF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 285 100 A105 0,125 A3-1F 1/2 - 24 150 # 285 250 A105 0,125 BLIND FLANGE A3-1F 1/2 - 2 150 # 285 250 A105 0,125 FLG x FTH - PROVIDED WITH 1/2" INCLUIR BLIND FLANGE A3-1F 30 - 42 150 # 285 250 A694 F42 0,125 FLG INCLUIR BLIND FLANGE A3-1F 1/2 - 24 300 # 285 250 A105 0,125 FLG INCLUIR 54 ORIFICE FLANGE A1A2 1/2 2 300 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 2 - 24 150# 285 250 0,125A105 FLG x BW ECP-VST-G-GEN-FT-001 469/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATI NG FACE SCHEDULE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECOPETROL REFINERÍA 55 ORIFICE FLANGE A1A2 2 1/2 8 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F 56 ORIFICE FLANGE A1A2 10 24 300 RF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F CARBON STEEL BLIND PLATE ASTM A 516 GR 70 A516 GR A105250 0,125 FLG x BW - Couple orif.wn-flg 1/2" th-ta300# 2852 - 24 57 BLIND PLATE A1A2 14 24 150 RF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 14 - 24 150# 285 250 A516 GR. 70 0,125 PADDLE BLIND 58 SPACER RING A1A2 14 24 150 RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 14 - 24 150# 285 250 A516 GR. 70 0,125 59 FIGURE 8 A1A2 1/2 12 150 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70,DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 1/2 - 12 150# 285 250 A516 GR. 70 0,125 60 DRIP RINGS A1A2 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 3/4 - 4 150# 285 250 A516 GR. 70 0,125 Drip ring 3/4" thd tap DRIP RINGS A3-1F 3/4 - 4 300# 285 250 A516 GR. 70 0,125 Drip ring 3/4" thd tap INCLUIR 61 GASKET A1A2 1/2 24 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 285 100 SS304 0,125 A3-1F 1/2 - 42 150# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - FLEXITALLIC CG, 1/8" THK GASKET A3-1F 1/2 - 42 300# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - INCLUIR GASKET A3-1F 1/2 - 24 600# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - INCLUIR UNION A3-1F 1/2 - 3/4 6000# 285 250 0,125 SW x FTH INCLUIR STRAINER "Y" TYPE A3-1F 1/2 - 2 150# 285 250 A105 0,125 FLG - 1/2" FTHD DRAIN WITH PLUG INCLUIR STEAM TRAPS A3-1F 1/2 - 3/4 800# 285 250 A105 0,125 SW - THERMODYNAMIC INCLUIRTHERMODYNAMIC 62 BOLTING A1A2 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 285 100 A193 GR B7 0,125 A3-1F 285 250 STUD A193 GR B7 / NUTS A194 GR 2H 0,125 NOTES: AMARILLO GRIS OSCUPO GRIS CLARO BLANCO ITEMS QUE SON IGUALES ITEMS NUEVOS EN CLASES CONTRATO ITEMS QUE NO EXISTEN EN CLASES CO ITEMS QUE HAY DIFERENCIA CON RELA ECP-VST-G-GEN-FT-001 470/761 Item PIPING ELEMENT CLASS N from (inDN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT TAG VALVE NOTES ANÁLISIS 1 GATE VALVE A1F2 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A105 0,125 F8 STELLIT E INTEGRA L SS304 SPIRAL WOUND SOLID HAND WHELL A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-100 Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND SOLID HAND WHEEL VC-101 FTH INCLUIR GATE VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-102 PE x FTH (6"Nipples welded + A106Gr B + Sch 160) INCLUIR ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 2 GATE VALVE A1F2 3 12 150 FF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A216 GR WCB 0,125 F8 STELLIT E RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E HAND WHELL A3-1F 2 - 10 150# 285 250 A216 GR. WCB 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND FLEXIB LE HAND WHEEL VC-200 FLG Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 2 - 24 150# 285 250 A216 GR WCB 0,125 13%Cr + HF(Tung sten STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND Throug h conduit VC- 250TC FLG INCLUIR 3 GATE VALVE A1F2 14 24 150 FF CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 285 100 A216 GR WCB 0,125 F8 STELLIT E RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E GEAR A3-1F 12 - 24 150# 285 250 A216 GR. WCB 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND FLEXIB LE GEAR VC-250 FLG Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL GATE VALVE A3-1F 26 - 32 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND FLEXIB LE GEAR VC-250 FLG INCLUIR CARBON STEEL SPRING BALL CHECK VALVE 4 CHECK VALVE A1F2 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 285 100 A105 0,125 F8 STELLIT E INTEGRA L SS304 SPIRAL WOUND A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND VR-100 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL 5 CHECK VALVE A1F2 3 24 150 FF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 285 100 A216 GR WCB 0,125 F8 STELLIT E RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND A3-1F 2 - 20 150 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND VR-200 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 471/761 Item PIPING ELEMENT CLASS N from (inDN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 6 GLOBE VALVE A1F2 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 285 100 A105 0,125 F8 STELLIT E INTEGRA L SS304 SPIRAL WOUND HAND WHEEL A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND HAND WHEEL VG-100 Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL GLOBE VALVE A3-1F 1 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND HAND WHEEL VG-200 FLG INCLUIR 7 GLOBE VALVE A1F2 3 12 150 FF CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER BOLTED 285 100 A216 GR WCB 0,125 F8 STELLIT E RENEWA BLE SEAT RINGS SS304 SPIRAL WOUND HAND WHEEL A3-1F 2 - 8 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT RINGS SS304 SPIRAL WOUND HAND WHEEL VG-200 Diferencias en: Rango de Diámetros & Trim. Se deja la configuración de ECOPETROL BONNET GASKET GRAPHITE FILLER BOLTED RINGS GLOBE VALVE A3-1F 10 - 20 150# 285 250 A216 GR WCB 0,125 F6 STELLITE RENEWAB LE SEAT SS304 SPIRAL WOUND GEAR VG-250 FLG INCLUIR 8 BUTTERFLY VALVE A1F2 3 12 150 FF CARBON STEEL, BUTTERFLY VALVE, LUGGED TYPE, ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16 5 TESTS AS PER API 598 285 100 A216 GR WCB 0,125 SS 316 DISC INCONEL LEVER A3-1F 9 BUTTERFLY VALVE A1F2 14 24 150 FF CARBON STEEL, BUTTERFLY VALVE, LUGGED TYPE, ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 285 100 A216 GR WCB 0,125 SS 316 DISC INCONEL GEAR A3-1F 10 BALL VALVE A1F2 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, CONSTRUCTION AS PER ASME B 16.34, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 285 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOATI NG LEVER A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 FULL VITON SS 316 FULL PORT FLOATI NG LEVER VB-102 PE x FTH (6"Nipples welded + A106Gr B + Sch 160) Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 11 BALL VALVE A1F2 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, CONSTRUCTION AS PER ASME B 16.34, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 285 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOATI NG LEVER A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 FULL VITON SS 316 FULL PORT FLOATI NG LEVER VB-101 PE (6"Nipples welded + A106Gr B + Sch 160) Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL BALL VALVE A3-1F 1/2 - 1 1/2 800# 285 250 A105 0,125 REDUC ED VITON SS 316 REDUC ED PORT FLOATI NG LEVER VB-100 PE (6"Nipples welded + A106Gr B + Sch 160) INCLUIR CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, SS 316 SS 316 GEAR ESTE TIPO DE VÁLVULA CUBRE LOS RANGOS DE DIÁMETROS EN LAS VÁLVULAS DE LA PIPING CLASS DE ECOPETROL VE-250250 CF8M DISC Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL A216 GR WCB 0,125 EPDM2 - 42 150 285 12 BALL VALVE A1F2 3 12 150 FF , , , FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 285 100 A216 GR WCB 0,125 F8 FULL FULL PORT TRUNNI ON MOUNT ED HAND WHEEL A3-1F 1 - 6 150# 285 250 A216 GR WCB 0,125 FULL VITON FULL PORT TRUNN ION MOUNT ED LEVER VB-201 Diferencias en: Rango de Diámetros & Operat. Se deja la configuración de ECOPETROL BALL VALVE A3-1F 2 - 6 150# 285 250 A216 GR WCB 0,125 REDUC ED VITON SS 316 REDUC ED LEVER VB-200 INCLUIR 13 BALL VALVE A1F2 14 24 150 FF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 285 100 A216 GR WCB 0,125 F8 FULL SS 316 FULL PORT TRUNNI ON MOUNT ED GEAR A3-1F 8 - 24 150# 285 250 A216 GR WCB 0,125 FULL VITON SS 316 FULL PORT TRUNN ION MOUNT ED GEAR VB-251 Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL BALL VALVE A3-1F 8 - 24 150# 285 250 A216 GR WCB 0,125 REDUC ED VITON SS 316 REDUC ED GEAR VB-250 INCLUIR ECP-VST-G-GEN-FT-001 472/761 Item PIPING ELEMENT CLASS N from (inDN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 14 PLUG VALVE A1F2 3 12 150 FF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, HANDWHEEL OPERATOR 285 100 A216 GR WCB 0,125 F8 SS 316 HAND WHEEL A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 15 PLUG VALVE A1F2 14 24 150 FF CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, FLAT FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, TRIM F8, BOLTED BONNET, 316 SS PLUG, GEAR OPERATOR 285 100 A216 GR WCB 0,125 F8 SS 316 GEAR A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 16 PIPE A1F2 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B,DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S160 - (1/2 - 3/4), S80 - (1 - 1 1/2) 285 250 A106 GR B 0,125 SEAMLESS Diferencias en: Rango de Diámetros y espesores (schedule). Se deja la configuración deconfiguración de ECOPETROL 17 PIPE A1F2 3 8 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 285 100 A106 GR B 0,125 A3-1F 18 PIPE A1F2 10 24 BE 20 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 285 100 A106 GR B 0,125 A3-1F PIPE A3-1F 26 - 36 SSTD - (26 - 28); S20 - (30 - 36) 285 250 A672 GR C60 CL.12 0,125 E.F.W. - 100% X-RAY - DOUBLE RANDOM LENGHT >= 2" INCLUIR PIPE A3-1F 42 API 14,27 285 250 API 5L GR. X42 0,125 E.F.W. - GOLD FBE COATING - DOUBLE RANDOM LENGHT >= 2" INCLUIR 19 ELBOW 45 DEGREES A1F2 1/2 2 3000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 45 DEGREE ELBOW FEMALE END Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 20 ELBOW 45 DEGREES A1F2 3 8 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 21 ELBOW 45 DEGREES A1F2 10 24 BW 20 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F ELBOW 45 DEGREES A3-1F 26 - 36 285 250 A234 GR.WPB 0,125 45 DEGREE ELBOW LR - 100% X-RAY INCLUIR ELBOW 45 DEGREES A3-1F 42 285 250 MSS SP-75 WPHY 42 0,125 45 DEGREE ELBOW LR INCLUIR Diferencias en: Rango SEAMLESS - POLYPROPYLENE COATED - DOUBLE RANDOM LENGHT >=2" 0,125 0,125 45 DEGREE ELBOW LR A106 GR B A234 GR.WPB2852 - 24 250 Diferencias en: Espesores (Schedule) en los diferentes diámetros del tubo. Se deja la configuración De TIPIEL SA 250 2 - 24 S80 - (2); SSTD - (3 - 6); S20 - (8 - 24) 285 22 ELBOW 90 DEGREES A1F2 1/2 2 3000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 90 DEGREE ELBOW FEMALE END Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 23 ELBOW 90 DEGREES A1F2 3 8 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 24 ELBOW 90 DEGREES A1F2 10 24 BW 20 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 0,125 90 DEGREE ELBOW LR2502 - 24 A234 GR.WPB285 ECP-VST-G-GEN-FT-001 473/761 Item PIPING ELEMENT CLASS N from (inDN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ELBOW 90 DEGREES A3-1F 26 - 36 285 250 A234 GR WPB 0,125 90 DEGREE ELBOW LR - 100% X-RAY INCLUIR ELBOW 90 DEGREES A3-1F 42 285 250 MSS SP-75 WPHY 42 0,125 90 DEGREE ELBOW LR INCLUIR 25 CONCENTRIC REDUCE A1F2 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE CONCENTRIC REDUCER A3-1F 2 - 4 285 250 A234 GR.WPB 0,125 BW x PE - CONCENTRIC SWAGE INCLUIR CONCENTRIC REDUCER A3-1F 1/2 - 2 S - XXS 285 250 A234 GR.WPB 0,125 BW x MTH - CONCENTRIC REDUCING NIPPLE INCLUIR CONCENTRIC REDUCER A3-1F 3/4 - 1 1/2 285 250 A234 GR.WPB 0,125 PE x PE - CONCENTRIC REDUCING NIPPLE INCLUIR CONCENTRIC REDUCER A3-1F 3/4 - 1 1/2 S - XXS 285 250 A234 GR.WPB 0,125 PE x MTH - CONCENTRIC REDUCING NIPPLE INCLUIR 26 CONCENTRIC REDUCE A1F2 3 8 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25 285 100 A234 GR WPB 0,125 A3-1FBEVELED ENDS AS PER ASME B16.25 WPB 27 CONCENTRIC REDUCE A1F2 10 24 BW 20 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F CONCENTRIC REDUCER A3-1F 26 - 36 285 250 A234 GR WPB 0,125 BW x BW- CONCENTRIC REDUCER - 100% X-RAY INCLUIR 28 ECCENTRIC REDUCER A1F2 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE ECCENTRIC REDUCER A3-1F 3 - 4 285 250 A234 GR.WPB 0,125 BW x PE - ECCENTRIC SWAGE INCLUIR ECCENTRIC REDUCER A3-1F 3/4 - 1 1/2 S - XXS 285 250 A234 GR.WPB 0,125 PE x MTH - ECCENTRIC REDUCING NIPPLE INCLUIR 29 ECCENTRIC REDUCER A1F2 3 8 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 30 ECCENTRIC REDUCER A1F2 10 24 BW 20 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F ECCENTRIC REDUCER A3-1F 26 - 36 285 250 A234 GR.WPB 0,125 BW x BW- ECCENTRIC REDUCER - 100% X-RAY INCLUIR 31 REDUCER INSERT A1F2 1/2 2 3000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 32 CAP A1F2 1/2 2 3000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16 11 FEMALE THREADED ENDS AS PER 285 100 A105 0 125 A3 1F 1/2 - 1 6000# - (1/2 - 3/4); 3000# - 285 250 A105 0 125 FTH CAP FORGED Diferencias en: Rango de Diámetros y Rating. S d j l A234 GR.WPB 0,125285 250 0,125250 3 - 24 A234 GR.WPB2853 - 24 32 CAP A1F2 1/2 2 3000 THD PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 1 1/2 6000# (1/2 3/4); 3000# (1 - 1 1/2) 285 250 A105 0,125 FTH - CAP FORGED Se deja la configuración de TIPIEL SA 33 CAP A1F2 1/2 2 3000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 SW - CAP FORGED Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 34 CAP A1F2 3 8 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 35 CAP A1F2 10 24 BW 20 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 36 STRAIGHT AND REDUC A1F2 1/2 2 3000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 TEE: 6000# - (1/2 -3/4); 3000# - (1 - 1 1/2); TEER: 6000# - (3/4 - 1 1/2) 285 250 A105 0,125 Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA A234 GR.WPB 0,125 BW - CAP285 2502 - 24 ECP-VST-G-GEN-FT-001 474/761 Item PIPING ELEMENT CLASS N from (inDN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 37 STRAIGHT AND REDUC A1F2 3 8 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 38 STRAIGHT AND REDUC A1F2 10 24 BW 20 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F STRAIGHT AND REDUCER TEE A3-1F 26 - 36 285 250 A234 GR WPB 0,125 100% X-RAY INCLUIR 39 OLET A1F2 1/2 2 3000 THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 40 OLET A1F2 1/2 2 3000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE OLET A3-1F 2 - 24 3000# 285 250 A105 0,125 BW x SW- ELBOLET FOR SR ELBOW INCLUIR OLET A3-1F 2 - 42 6000#; 3000# 285 250 A105 0 125 BW x SW - SOCKOLET INCLUIR 0,125250 A234 GR.WPB2 - 24 285 OLET A3-1F 2 - 42 6000#; 3000# 285 250 A105 0,125 BW x SW - SOCKOLET INCLUIR 41 OLET A1F2 3 8 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 42 OLET A1F2 10 24 BW 20 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 285 100 A234 GR WPB 0,125 A3-1F 43 PLUG A1F2 1/2 2 3000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 285 250 A105 0,125 MTH - PLUG - ROUND HEAD TYPE 44 COUPLING A1F2 1/2 2 3000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 FHT - COUPLING Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA COUPLING A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 SW x FTH - COUPLING INCLUIR 45 COUPLING A1F2 1/2 2 3000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 6000# - (1/2 - 3/4); 3000# - (1 - 1 1/2) 285 250 A105 0,125 Diferencias en: Rango de Diámetros y Rating. Se deja la configuración de TIPIEL SA 46 HALF COUPLING A1F2 1/2 2 3000 THD CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 3000# 285 250 A105 0,125 PE x FTH Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 47 HALF COUPLING A1F2 1/2 2 3000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 3000# 285 250 A105 0,125 PE x SW Diferencias en: Rango de Diámetros. Se deja l fi ió d 0,125A1053 - 42 285 BW x BW WELDOLET250 47 HALF COUPLING A1F2 1/2 2 3000 SW DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 285 100 A105 0,125 A3 1F 1/2 3000# 285 250 A105 0,125 PE x SW la configuración de ECOPETROL 48 NIPPLE A1F2 1/2 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S-XXS 285 250 A106 GR B 0,125 MTH - LENGTH = 100 mm Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL NIPPLE A3-1F 1/2 - 1 1/2 S-XXS 285 250 A106 GR B 0,125 PE x MTH; PARA LONGITUDES DE: 100 y 200 mm INCLUIR 49 NIPPLE A1F2 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 285 100 A106 GR B 0,125 A3-1F 1/2 - 1 1/2 S-160 285 250 A106 GR B 0,125 PARA LONGITUDES DE: 100 y 200 mm Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 50 FLANGE A1F2 1/2 2 150 FF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 285 100 A105 0,125 A3-1F 1/2 - 1 1/2 150# 285 250 A105 0,125 FLG x SW 51 FLANGE A1F2 3 8 150 FF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 285 100 A105 0,125 A3-1F A1052502 24 150# 285 FLG x BW0 125 ECP-VST-G-GEN-FT-001 475/761 Item PIPING ELEMENT CLASS N from (inDN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 52 FLANGE A1F2 10 24 150 FF 20 CARBON STEEL, WELDING NECK FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 285 100 A105 0,125 A3-1F FLANGE A3-1F 26 - 36 150# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 42 150# 285 250 A694 F42 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 1 1/2 - 2 300# 285 250 A105 0,125 FLG x PE - LONG WELDNECK FLANGE INCLUIR FLANGE A3-1F 2 - 24 300# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR FLANGE A3-1F 2 - 24 600# 285 250 A105 0,125 FLG x BW - WELDNECK FLANGE INCLUIR 53 BLIND FLANGE A1F2 1/2 24 150 FF CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END 285 100 A105 0,125 A3-1F 1/2 - 24 150 # 285 250 A105 0,125 BLIND FLANGE A3-1F 1/2 - 2 150 # 285 250 A105 0,125 FLG x FTH - PROVIDED WITH 1/2" FTHD TAPER BORE INCLUIR BLIND FLANGE A3-1F 30 - 42 150 # 285 250 A694 F42 0,125 FLG INCLUIR BLIND FLANGE A3-1F 1/2 - 24 300 # 285 250 A105 0,125 FLG INCLUIR A1052502 - 24 150# 285 FLG x BW0,125 BLIND FLANGE A3 1F 1/2 24 300 # 285 250 A105 0,125 FLG INCLUIR 54 ORIFICE FLANGE A1F2 1/2 2 300 FF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F 285 250 0,125 NO EXISTE EN ESTA CLASE 55 ORIFICE FLANGE A1F2 3 8 300 FF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F 56 ORIFICE FLANGE A1F2 10 24 300 FF 20 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A- 194 GR. 2H AND PLUGS ASTM A-105. 285 100 A105 0,125 A3-1F 57 BLIND PLATE A1F2 14 24 150 FF CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70,DIMENSIONS AS PER ASME B16.5, FLAT FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 14 - 24 150# 285 250 A516 GR. 70 0,125 PADDLE BLIND 58 SPACER RING A1F2 14 24 150 FF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70,DIMENSIONS AS PER ASME B16.5, FLAT FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 14 - 24 150# 285 250 A516 GR. 70 0,125 285 A105 0,1252502 - 24 300# FLG x BW - Couple orif.wn-flg 1/2" th-ta 59 FIGURE 8 A1F2 1/2 12 150 FF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, FLAT FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 1/2 - 12 150# 285 250 A516 GR. 70 0,125 60 DRIP RINGS A1F2 2 24 150 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, FLAT FACE ENDS 285 100 A516 GR 70 0,125 A3-1F 3/4 - 4 150# 285 250 A516 GR. 70 0,125 Drip ring 3/4" thd tap DRIP RINGS A3-1F 3/4 - 4 300# 285 250 A516 GR. 70 0,125 Drip ring 3/4" thd tap INCLUIR 61 GASKET A1F2 1/2 24 150 FF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR FLAT FACE FLANGES ASME B16.5 285 100 SS 304 0,125 A3-1F 1/2 - 42 150# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - FLEXITALLIC CG, 1/8" THK GASKET A3-1F 1/2 - 42 300# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - FLEXITALLIC CG, 1/8" THK INCLUIR GASKET A3-1F 1/2 - 24 600# 285 250 AISI 304 0,125 SPIRAL WOUND GASKET - FLEXITALLIC CG, 1/8" THK INCLUIR UNION A3-1F 1/2 - 3/4 6000# 285 250 0,125 SW x FTH INCLUIR STRAINER "Y" TYPE A3-1F 1/2 - 2 150# 285 250 A105 0,125 FLG - 1/2" FTHD DRAIN WITH PLUG INCLUIR STEAM TRAPS A3-1F 1/2 - 3/4 800# 285 250 A105 0,125 SW - THERMODYNAMIC TYPE WITH "Y" STRAINER INCLUIR 62 BOLTING A1F2 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1 1 DIMENSIONS AS PER 285 100 A193 GR B7 0,125 A3-1F 285 250 STUD A193 GR B7 / NUTS A194 0,125LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 B7 NUTS A194 GR 2H NOTES: AMARILLO GRIS OSCUPO GRIS CLARO BLANCO ITEMS NUEVOS EN CLASES CONTRATO ITEMS QUE SON IGUALES ITEMS QUE HAY DIFERENCIA CON RELA ITEMS QUE NO EXISTEN EN CLASES CO ECP-VST-G-GEN-FT-001 476/761 Item PIPING ELEMENT CLASS N from (inDN to (in) RATING FACE SCHEDU LE COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 ECP-VST-G-GEN-FT-001 477/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL, BRONZE, CAST IRON DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 220 ASTM A106 GR. B DATE: 14-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 FIRE WATER FWA 200 260 FOAM FOM 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 ANSI RATING ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM B61 / ASTM A395 CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 POR: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CORROSION ALLOWANCE 1/8" AA1A33-03 FLANGE FINISH RF NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 478/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL, BRONZE, CAST IRON DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 220 ASTM A106 GR. B DATE: 14-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 ANSI RATING ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM B61 / ASTM A395 CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 POR: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CORROSION ALLOWANCE 1/8" AA1A33-03 FLANGE FINISH RF ECP-VST-G-GEN-FT-001 479/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AA1A33-03 1/2 1 1/2 200# FTH GA17H6J2 2 GATE VALVE AA1A33 03 2 12 150# RF GA01A2J2 COMPONENTS DESCRIPTION ASTM B61, BRONZE CASTING, BODY/BONNET: SCREW-OVER, STUD BOLTS: NOT REQUIRED, GASKET: **, WEDGE: SOLID TYPE, SEATS: INTEGRAL TYPE, TRIM: BRONZE, STEM: O.S. & Y, PACKING: LUBRICATED FIBER+GRAPHITE, RP FEMALE ENDS RB, OPERATION: HAND WHEEL, COMMENT: **, PORT OPENING: STANDARD, MSS SP-80 TEST/CONSTRUCTION. ASTM A395 CAST IRON, BODY/BONNET: SCREW-OVER, STUD BOLTS: NOT REQUIRED, GASKET: SYNTHETIC FIBERS, WEDGE: SOLID TYPE, SEATS: INTEGRAL OR RENEWABLE TYPE TRIM BRONZE STEM O S & Y PACKING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 2 GATE VALVE AA1A33-03 2 12 150# RF GA01A2J2 3 GLOBE VALVE AA1A33-03 2 10 150# RF GL01A2J2 4 CHECK VALVE AA1A33-03 2 12 150# RF CK01A2J1 5 PIPE AA1A33-03 1/2 3/4 PE 160 T-01 6 PIPE AA1A33-03 1 1 1/2 PE 80 T-01 INTEGRAL OR RENEWABLE TYPE, TRIM: BRONZE, STEM: O.S. & Y, PACKING: LUBRICATED FIBER, LP, OPERATION: HAND WHEEL, COMMENT: MSS SP-70 TEST/CONSTRUCTION. PORT OPENING: STANDARD ASTM A395 CAST IRON, BODY/BONNET: BOLTED, STUD BOLTS: HEX.HEAD BOLTS & NUTS A307 GR. B, GASKET: SYNTHETIC FIBERS, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: BRONZE, STEM: O.S. & Y, PACKING: LUBRICATED FIBER, LP, OPERATION: HAND WHEEL. ASTM A395 CAST IRON, BODY/CAP: BOLTED, STUD BOLTS: HEX.HEAD BOLTS & NUTS A307 GR B, GASKET: SYNTHETIC FIBERS, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: BRONZE, INSTALLATION: HORIZONTAL & VERTICAL. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 7 PIPE AA1A33-03 2 2 BE 80 T-01 8 PIPE AA1A33-03 3 6 BE STD T-01 9 PIPE AA1A33-03 8 12 BE 20 T-01 ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 480/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 10 NIPPLE AA1A33-03 1 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 11 NIPPLE AA1A33-03 1 1/2 1 1/2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100 mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, MALE THREADED END AS PER ASME B1.20.1, NPT, L = 100 mm 12 NIPPLE AA1A33-03 1 1/2 1 1/2 MTH ACCORDING TO PIPE SCHEDULE T-01 13 NIPPLE AA1A33-03 1 1/2 1 1/2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 14 NIPPLE AA1A33-03 1 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 15 ELBOW 45 DEGREES AA1A33-03 1/2 3/4 6000# SW A-01 16 ELBOW 45 DEGREES AA1A33-03 1 1+1/2 3000# SW A-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100 mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, MALE THREADED END AS PER ASME B1.20.1, NPT, L = 200 mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 200 mm CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL ELBOW 90 DEGREES FEMALE END ASTM A 105 DIMENSIONS 17 ELBOW 90 DEGREES AA1A33-03 1/2 3/4 6000# SW A-01 18 ELBOW 90 DEGREES AA1A33-03 1 1+1/2 3000# SW A-01 19 ELBOW 45 DEGREES AA1A33-03 2 12 BW ACCORDING TO PIPE SCHEDULE A-02 20 ELBOW 90 DEGREES AA1A33-03 2 12 BW ACCORDING TO PIPE SCHEDULE A-02 2 12 1/2 3/4 2 12 22 OLET AA1A33-03 3000# 21 OLET BW x SW ACCORDING TO AA1A33-03 6000# BW x SW ACCORDING TO PIPE SCHEDULE A-01 A-01 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING END AS PER ASME B16 11 BEVELED END AS PER ASME 1 1 1/2 6 12 2 4 24 STRAIGHT TEE AA1A33-03 1/2 3/4 6000# SW A-01 A-02BW x BW CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 OLET AA1A33-03 22 OLET AA1A33-03 3000# BW x SW PIPE SCHEDULE 23 ACCORDING TO PIPE SCHEDULE A-01SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS- SP-97, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 481/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 25 STRAIGHT TEE AA1A33-03 1 1+1/2 3000# SW A-01 3/4 1+1/2 1/2 3/4 1 1/2 1 1/2 1 1 1/2 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 A-01 A-01 AA1A33-03 3000# SW x SW27 REDUCER TEE 26 REDUCER TEE AA1A33-03 6000# SW x SW 1 1 1/2 28 STRAIGHT TEE AA1A33-03 2 12 BW ACCORDING TO PIPE SCHEDULE A-02 3 12 2 10 30 COUPLING AA1A33-03 1/2 3/4 6000# SW x FTH A-01 31 COUPLING AA1A33-03 1/2 3/4 6000# SW A-01 32 COUPLING AA1A33-03 1 1+1/2 3000# SW A-01 33 COUPLING AA1A33-03 1 1+1/2 3000# SW x FTH A-01 A-0229 REDUCER TEE AA1A33-03 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END 33 COUPLING AA1A33 03 1 1 1/2 3000# SW x FTH A 01 34 COUPLING AA1A33-03 1 1+1/2 3000# FTH A-01 35 HALF COUPLING AA1A33-03 1 1+1/2 3000# PE x SW A-01 36 HALF COUPLING AA1A33-03 1 1+1/2 3000# PE x FTH A-01 2 4 1/2 1 1/2 1/2 2 1/2 3/4 3/4 1+1/2 1/2 1 A-0239 CONCENTRIC REDUCER AA1A33-03 PE x PE ACCORDING TO PIPE SCHEDULE A-02 38 CONCENTRIC REDUCER AA1A33-03 BW x FTH XXS A-02 37 CONCENTRIC REDUCER AA1A33-03 BW x PE ACCORDING TO PIPE SCHEDULE , , AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING END AS PER ASME B16.11, PLAIN END CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, PLAIN END CARBON STEEL, CONCENTRIC SWAGE ASTM A 234 GR. WPB, AS PER MSS SP- 95, BEVELED END AS PER ASME B16.25, PLAIN END CARBON STEEL, CONCENTRIC REDUCING NIPPLE, SEAMLESS, ASTM A 234 GR. WPB, AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, FEMALE THREADED END AS PER ASME B1.20.1, NPT CARBON STEEL, CONCENTRIC REDUCING NIPPLE, SEAMLESS ASTM A 234 GR. WPB, AS PER MSS SP-95, PLAIN ENDS1/2 1 3/4 1+1/2 1/2 1 40 CONCENTRIC REDUCER AA1A33-03 PE x FTH XXS A-02 PIPE SCHEDULE WPB, AS PER MSS SP-95, PLAIN ENDS CARBON STEEL CONCENTRIC REDUCING NIPPLE, SEAMLESS ASTM A234 GR. WPB, AS PER MSS SP-95, PLAIN END, FEMALE THREADED END AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 482/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 3 12 2 10 3 4 1/2 1 1/2 3/4 1+1/2 1/2 1 A-02 A-02 BW x PE ACCORDING TO PIPE SCHEDULE 43 ECCENTRIC REDUCER AA1A33-03 PE x FTH ACCORDING TO PIPE SCHEDULE A-02 41 CONCENTRIC REDUCER AA1A33-03 BW x BW ACCORDING TO PIPE SCHEDULE 42 ECCENTRIC REDUCER AA1A33-03 CARBON STEEL CONCENTRIC REDUCER ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25. CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, AS PER MSS SP- 95, BEVELED END AS PER ASME B16.25, PLAIN END CARBON STEEL, ECCENTRIC REDUCING NIPPLE, SEAMLESS ASTM A234 GR. WPB, MSS SP-95, PLAIN END, FEMALE THREADED END AS PER ASME B1.20.1, 1/2 1 3 12 2 10 45 PLUG AA1A33-03 1/2 1+1/2 MTH 46 CAP AA1A33-03 1/2 3/4 6000# SW A-01 47 CAP AA1A33-03 1/2 3/4 6000# FTH A-01 48 CAP AA1A33-03 1 1+1/2 3000# SW A-01 49 CAP AA1A33-03 1 1+1/2 3000# FTH A-01 A-0244 ECCENTRIC REDUCER AA1A33-03 BW x BW ACCORDING TO PIPE SCHEDULE PIPE SCHEDULE NPT CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL, CAP, ASM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT 50 CAP AA1A33-03 2 12 BW ACCORDING TO SCHEDULE PIPE A-02 51 FLANGE AA1A33-03 1/2 1+1/2 150# RF ACCORDING TO SCHEDULE PIPE B-01 52 FLANGE AA1A33-03 1/2 1+1/2 300# RF ACCORDING TO SCHEDULE PIPE B-01 53 FLANGE AA1A33-03 2 12 150# RF ACCORDING TO SCHEDULE PIPE B-02 54 FLANGE AA1A33-03 2 12 600# RF ACCORDING TO SCHEDULE PIPE B-02 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 483/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 55 FLANGE AA1A33-03 2 12 300# RF ACCORDING TO SCHEDULE PIPE B-02 56 FLANGE AA1A33-03 1+1/2 2 300# RF ACCORDING TO SCHEDULE PIPE B-02 57 BLIND FLANGE AA1A33-03 1/2 12 150# RF B-03 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, LONG WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END X PLAIN END CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 58 BLIND FLANGE AA1A33-03 1/2 2 150# RF B-03 59 ORIFICE FLANGE AA1A33-03 2 12 300# RF ACCORDING TO PIPE SCHEDULE 60 FIGURE 8 AA1A33-03 1/2 12 150# RF 61 GASKET AA1A33-03 1/2 12 150# RF E-01 B16.5, RAISED FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE (WITH NPT ORIFICE 1/2 TH-TAP), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, FOR INSTALLATION BETWEEN ASME B16.5 FLANGES, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END X FEMALE THREADED END , PROVIDED WITH 1/2" FTHD TAPER BORE 62 GASKET AA1A33-03 1/2 12 600# RF E-01 63 GASKET AA1A33-03 1/2 12 300# RF E-01 64 STRAINER "Y" TYPE AA1A33-03 1/2 6 150# RF 65 STEAM TRAPS AA1A33-03 1/2 3/4 800# SW 66 BOLTING AA1A33 03 P 01 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 CARBON STEEL, STRAINER "Y" TYPE, ASTM A105 WITH 1/2" FTHD DRAIN WITH PLUG, AISI 316 SCREEN, MANUF.S STD / FLG CONN. FOR ASME B16.5, SW X FTH. CARBON STEEL, STEAM TRAPS ASTM A105, THERMODYNAMIC TYPE WITH "Y" STRAINER, DIMENSIONS AS PER MANUFACTURER'S STD, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED 66 BOLTING AA1A33-03 P-01 , , ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 484/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: Versión1 DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 120 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 NAPHTA NAP 20% X-RAY 200 680 DILUENT DIL 300 655 400 635 500 605 600 570 650 550 700 530 750 505 800 410 850 320 900 230 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 AA2A32-01 PIPING MATERIAL SPECIFICATION FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/8" RF API 5L GR. X42 ONLY FOR 26" TO 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 485/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: Versión1 DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 120 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 AA2A32-01 PIPING MATERIAL SPECIFICATION FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/8" RF API 5L GR. X42 ONLY FOR 26" TO 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / ASTM A694 F42 / MSS SP-75 WPHY 42 ECP-VST-G-GEN-FT-001 486/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AA2A32-01 1/2 1 1/2 800# SW GA04F0B2 COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, C 2 GATE VALVE AA2A32-01 1/2 1 1/2 800# FTH GA04H0B2 3 GATE VALVE AA2A32-01 2 10 300# RF GA02A0B1 4 GATE VALVE AA2A32-01 12 24 300# RF GA02A0B1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, C, REDUCED BORE CARBON STEEL, GATE VALVE LP, ASTM A216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COM CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, FB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED 4 GATE VALVE AA2A32 01 12 24 300# RF GA02A0B1 5 GATE VALVE AA2A32-01 26 36 300# RF GA02A0B1 6 GATE VALVE AA2A32-01 8 24 300# RF GA02A0B3 CARBON STEEL, CONDUIT GATE VALVE, ASTM A216 GR. WCB, ACCORDING TO API 6D, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF(TUNGSTENCARBIDE)GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FL F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600 / API 6D, FULL BORE, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16.47 SERIE B, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR ECP-VST-G-GEN-FT-001 487/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 7 CHECK VALVE AA2A32-01 2 24 300# RF CK02A0B1 CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION ASTM A 216 GR WCB FB ALL APPLICABLE POINTS AS CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 600, RAISED FACE FLANGED ENDS, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: API 600 / API 602 8 CHECK VALVE AA2A32-01 26 36 300# RF CK02A0B1 9 GLOBE VALVE AA2A32-01 1/2 1 1/2 800# SW GL04F0B2 10 GLOBE VALVE AA2A32-01 2 6 300# RF GL02A0B2 CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A105, ALL APLICABLE POINTS AS FOR BS 1873 SOCKET WELDING ENDS AS PER ASME B16.11, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB,ALL APPLICABLE POINTS AS FOR BS 1873, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL VERTICAL INSTALLATION, ASTM A-216 GR. WCB, FB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.47, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8) 11 GLOBE VALVE AA2A32-01 8 16 300# RF GL02A0B2 12 BALL VALVE AA2A32-01 1/2 1 1/2 800# PE BA04G0I1J CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 1873, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COEFF CARBON STEEL, BALL VALVE EXT.FEM.END W/2 NIP FB, FLOATING, FULL PORT, ASTM A105, ACCORDING TO ASME B16.34, PLAIN ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, + 6" NIPPLES WELDED +A106 GR B+SCH160 ECP-VST-G-GEN-FT-001 488/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 13 BALL VALVE AA2A32-01 2 4 300# RF BA02A0I1J CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A216 GR. WCB, ACCORDING TO ASME B16.34, RAISED FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, ACCORDING TO API 608. CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A216 14 BALL VALVE AA2A32-01 6 20 300# RF BA02A0I1J 15 BALL VALVE AA2A32-01 14 36 300# RF BA02A0I1J 16 PIPE AA2A32-01 1/2 3/4 PE 160 T-01 17 PIPE AA2A32-01 1 1 1/2 PE 80 T-01 18 PIPE AA2A32-01 2 3 BE 80 T-01 CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL SEAMLESS PIPE ASTM A106 GR B DIMENSIONS AS PER ASME CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34/API 6D, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR , , , , GR. WCB, ACCORDING TO ASME B16.34/API 608, RAISED FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. 19 PIPE AA2A32-01 4 20 BE 40 T-01 20 PIPE AA2A32-01 22 22 BE 60 T-01 21 PIPE AA2A32-01 24 24 BE 40 T-01 22 PIPE AA2A32-01 26 26 BE API 0,625 T-01 23 PIPE AA2A32-01 28 28 BE 30 T-01 24 PIPE AA2A32-01 30 30 BE API 0,688 T-01 25 PIPE AA2A32 01 36 36 BE 40 T 01 CARBON STEEL, E.F.W. D.S.A.W. PIPE, API 5L X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.F.W. D.S.A.W. PIPE, API 5L X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.F.W. D.S.A.W. PIPE, API 5L X42, DIMENSIONS AS PER ASME CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.F.W. D.S.A.W. PIPE, API 5L X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 25 PIPE AA2A32-01 36 36 BE 40 T-01 , , , B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 489/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 26 PIPE AA2A32-01 42 42 BE API 0,875 T-01 27 ELBOW 45 DEGREES AA2A32-01 1/2 1 1/2 6000# SW ACCORDING TO PIPE SCHEDULE A-01 28 ELBOW 45 DEGREES AA2A32-01 2 24 BW ACCORDING TO SC A-02 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16 9 BEVELED ENDS AS PER ASME B16 25 CARBON STEEL, E.F.W. D.S.A.W. PIPE, API 5L X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 28 ELBOW 45 DEGREES AA2A32-01 2 24 BW PIPE SCHEDULE A-02 29 ELBOW 45 DEGREES AA2A32-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 30 45 DEGREE INDUCTION BEND R=6D AA2A32-01 6 24 BW ACCORDING TO PIPE SCHEDULE A-03 31 45 DEGREE INDUCTION BEND R=6D AA2A32-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 32 ELBOW 90 DEGREES AA2A32-01 1/2 1 1/2 6000# SW A-01 33 ELBOW 90 DEGREES AA2A32-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 34 ELBOW 90 DEGREES AA2A32 01 26 42 BW ACCORDING TO A 03 CARBON STEEL, 45 DEGREE INDUCTION BEND R=6D, ASTM A106 GR. B, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25, ACCORDING TO ASME B16.49 DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, E.F.W. 45 DEGREE INDUCTION BEND R = 6D, API 5L GR X42, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25, ACCORDING TO ASME B16.49. CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 34 ELBOW 90 DEGREES AA2A32-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 2 3 1/2 1 1/2 1/2 2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 3 24 2 22 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP 75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CONCENTRIC REDUCER AA2A32-01 39 A-02ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25BW x BW CONCENTRIC REDUCER AA2A32-01 BW x MTH CONCENTRIC REDUCER AA2A32-01 PE x MTH PE x PE A-02 A-02 A-02 37 XXS 36 AA2A32-01 A-02 38 XXS 35 CONCENTRIC REDUCER AA2A32-01 BW x PE ACCORDING TO PIPE SCHEDULE CONCENTRIC REDUCER 160 26 42 18 36 2 3 1/2 1 1/2 A-03 A-02 40 CONCENTRIC REDUCER AA2A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 41 ECCENTRIC REDUCER AA2A32-01 BW x PE ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 490/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 3/4 1 1/2 1/2 1 3 24 2 22 26 42 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS A 03 CARBON STEEL, ECCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECCENTRIC REDUCER A-02PE x MTH XXS AA2A33 01 A-02 BW BW ACCORDING TO BW x BW ACCORDING TO PIPE SCHEDULE AA2A32-01 43 ECCENTRIC REDUCER AA2A32-01 44 ECCENTRIC REDUCER 42 18 36 45 CAP AA2A32-01 1/2 1 1/2 6000# THD A-01 46 CAP AA2A32-01 1/2 1 1/2 6000# SW A-01 47 CAP AA2A32-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 48 CAP AA2A32-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 49 STRAIGHT TEE AA2A32-01 1/2 1 1/2 6000# SW A-01 50 STRAIGHT TEE AA2A32-01 2 24 BW ACCORDING TO A-02 CARBON STEEL, ECCENTRIC REDUCER, MSS SP 75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-03 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT AA2A33-01 BW x BW ACCORDING TO PIPE SCHEDULE44 ECCENTRIC REDUCER 50 STRAIGHT TEE AA2A32-01 2 24 BW PIPE SCHEDULE A-02 51 STRAIGHT TEE AA2A32-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 3/4 1 1/2 1/2 1 3 24 2 22 26 42 16 36 2 24 1/2 1 1/2 55 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-0354 REDUCER TEE AA2A33-01 A-01 A-02 BW x SW ACCORDING TO PIPE SCHEDULE CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 B16.9, BEVELED ENDS AS PER ASME B16.25 ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULEBW x BW OLET AA2A32-01 6000# CARBON STEEL, SOCKOLET, ASTM A105, DIMENSIONS AS PER MSS SP-97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 BW x BW SW x SW6000# A-01 53 REDUCER TEE AA2A32-01 52 REDUCER TEE AA2A32-01 26 42 1/2 1 1/2 56 A-03OLET AA2A33-01 6000# BW x SW ACCORDING TO PIPE SCHEDULE CARBON STEEL, SOCKOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 491/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 6 24 2 12 26 42 12 16 59 PLUG AA2A32 01 1/2 1 1/2 MTH A-0358 OLET AA2A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED END AS PER ASME B16.25 CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A105, DIMENSIONS AS ACCORDING TO PIPE SCHEDULE A-0257 OLET AA2A32-01 CARBON STEEL, WELDOLET, ASTM A105, DIMENSIONS AS PER MSS SP-97, BEVELED ENDS AS PER ASME B16.25BW x BW 59 PLUG AA2A32-01 1/2 1 1/2 MTH 60 COUPLING AA2A32-01 1 1 1/2 6000# FTH A-01 61 COUPLING AA2A32-01 1/2 1 1/2 6000# SW x FTH A-01 62 COUPLING AA2A32-01 1 1 1/2 6000# SW A-01 63 HALF COUPLING AA2A32-01 1 1 1/2 6000# PE x FTH A-01 64 HALF COUPLING AA2A32-01 1 1 1/2 6000# PE x SW A-01 65 NIPPLE AA2A32-01 1/2 1 1/2 MTH ACCORDING TO SCHEDULE PIPE T-01 CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, HALF COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, PLAIN END CARBON STEEL, HALF COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING END AS PER ASME B16.11, PLAIN END CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100mm 66 NIPPLE AA2A32-01 1/2 1 1/2 PE x MTH ACCORDING TO SCHEDULE PIPE T-01 67 NIPPLE AA2A32-01 1/2 1 1/2 PE ACCORDING TO SCHEDULE PIPE T-01 68 FLANGE AA2A32-01 1/2 1 1/2 300# RF ACCORDING TO PIPE SCHEDULE B-01 69 FLANGE AA2A32-01 2 24 300# RF ACCORDING TO PIPE SCHEDULE B-02 70 FLANGE AA2A32-01 26 42 300# RF ACCORDING TO PIPE SCHEDULE B-04 71 FLANGE AA2A32-01 6 8 300# RF ACCORDING TO PIPE SCHEDULE B-02 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.47, RAISED FACE CARBON STEEL, ANCHOR FLANGE, ASTM A105, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 55 TONS OF THRUST FORCE CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED END AS PER ASME B1.20.1, NPT, PLAIN ENDS, L = 100 & 200 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100 & 200mm , ECP-VST-G-GEN-FT-001 492/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 72 BLIND FLANGE AA2A32-01 1/2 24 300# RF B-03 73 BLIND FLANGE AA2A32-01 26 42 300# RF B-03 CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE + 1/2" TH-TAP) ASTM A105 DIMENSIONS AS 74 ORIFICE FLANGE AA2A32-01 2 24 300# RF ACCORDING TO PIPE SCHEDULE 75 UNION AA2A32-01 1/2 1 1/2 6000# SW x FTH 76 PADDLE BLIND AA2A32-01 14 30 300# RF 77 SPACER RING AA2A32-01 14 30 300# RF 78 FIGURE 8 AA2A32-01 1/2 12 300# RF 79 GASKET AA2A32-01 1/2 42 300# RF E-01 NECK FLANGE WITH NPT ORIFICE, + 1/2 TH-TAP), ASTM A105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RAISED FACE FLANGED END. CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.11 ALL POINTS APPLICABLE, SOCKET WELD END AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1 CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL OUTER RING, FLEXITALLIC CG, THICKNESS 1/8" INCHES, AISI 304 SS DIMENSIONS AS PER ASME B16 20 SUITABLE FOR RAISED FACE FLANGES CARBON STEEL, SPACER RING, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, PADDLE BLIND ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE 79 GASKET AA2A32 01 1/2 42 300# RF E 01 80 INSULATION KIT AA2A32-01 1 42 300# E-04 81 BOLTING AA2A32-01 P-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 INSULATION KIT, DIMENSIONS AS PER MANUFACTURER'S STD, GASKET TYPE F WITH SEALS, INSULATING WASHERS, STEEL WASHERS AND INSULATING SLEEVES ECP-VST-G-GEN-FT-001 493/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 500 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 AROMATIC HYDROCARBONS ARM 200 680 ASPHALT ASP 300 655 HYDROGEN HYD 400 635 BUTHANE BUT 500 605 CAUSTIC SODA CAU 600 570 CHEMICALS QUI CORROSION ALLOWANCE POR: 1/8" AA2A33-01 FLANGE FINISH ANSI RATING RF ASTM A672 GR C70 CL.12 ONLY FOR 26" TO 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 600 570 CHEMICALS QUI 650 550 CONDENSATE CND 700 530 QUENCH OIL QHO 750 505 CYCLE OIL - HEAVY HCO 800 410 CYCLE OIL - LIGHT ALC 850 320 DECOKING STEAM DKS 900 230 DEMEX BOTTOMS FDX DIESEL OIL “ACPM” DSO ETHANE ETA ETHYLENE ETI GASOIL GLS GASOLINE MOTOR EXTRA EXT ECP-VST-G-GEN-FT-001 494/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 500 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) CORROSION ALLOWANCE POR: 1/8" AA2A33-01 FLANGE FINISH ANSI RATING RF ASTM A672 GR C70 CL.12 ONLY FOR 26" TO 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 GASOLINE MOTOR REGULAR COC GLYCOL GLY HEAVY GASOIL HGO HEAVY NAPHTHA HGA HYDROTREATED NAPHTHA NHT KEROSENE KERKEROSENE KER LIGHT GASOIL LGO LIGHT NAPHTHA LGA LIQUIFIED PETROLEUM GAS, INCLUDING OLEFIN FEED STREAMS LPG LOW PRESSURE CONDENSATE LPC LOW PRESSURE STEAM LPS MEDIUM PRESSURE STEAM MPS NATURAL GAS (350#) NTG NITROGEN NIT PLATFORMADO PLT POLYETHYLENE + ETHYLENE LPE PROPANE PRY ECP-VST-G-GEN-FT-001 495/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 500 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) CORROSION ALLOWANCE POR: 1/8" AA2A33-01 FLANGE FINISH ANSI RATING RF ASTM A672 GR C70 CL.12 ONLY FOR 26" TO 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PROPYLENE PPN SOFTENED WATER SWA PRODUCED WATER PWA METHANOL MET NAPHTA NAP DILUTED PRODUCED FLUID DPFDILUTED PRODUCED FLUID DPF ASOCIATED GAS ASG FUEL GAS FUG HIGH PRESSURE CONDENSATE HPC HIGH PRESSURE STEAM HPS CRUDE CRU BOILER FEED WATER BFW DILUENT DIL NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 496/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 500 ASTM A106 GR. B DATE: 16-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 700 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) CORROSION ALLOWANCE POR: 1/8" AA2A33-01 FLANGE FINISH ANSI RATING RF ASTM A672 GR C70 CL.12 ONLY FOR 26" TO 42" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ECP-VST-G-GEN-FT-001 497/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AA2A33-01 1/2 2 800# SW GA04F0B2 COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, RB, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL CARBON STEEL GATE VALVE RP FEMALE ENDS RB ASTM A105 ACCORDING TO API 2 GATE VALVE AA2A33-01 1/2 1 1/2 800# FTH GA04H0B2 3 GATE VALVE AA2A33-01 1/2 1 1/2 800# PE x FTH GA04K0B2 4 GATE VALVE AA2A33-01 3 12 300# RF GA02A0B1 CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, C, REDUCED BORE CARBON STEEL, GATE VLV EXT.FEM.END W/1NIP RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, PE X FTH, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, C, REDUCED BORE 5 GATE VALVE AA2A33-01 14 24 300# RF GA02A0B1 6 GATE VALVE AA2A33-01 26 36 300# RF GA02A0B1 CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600, FB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 600 / API 6D, FULL BORE, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16.47 SERIE B, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR ECP-VST-G-GEN-FT-001 498/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 7 CHECK VALVE AA2A33-01 1/2 1 1/2 800# SW CL04F0B2 CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL CARBON STEEL, (LIFT) SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, RB, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT. ACC. TO API 602 8 CHECK VALVE AA2A33-01 2 24 300# RF CK02A0B1 9 CHECK VALVE AA2A33-01 26 36 300# RF CK02A0B1 10 GLOBE VALVE AA2A33-01 1/2 2 800# SW GL04F0B2 , , INSTALLATION, ASTM A-216 GR. WCB, FB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, FB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.47, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304- GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8) CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34 / BS 1873, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 11 GLOBE VALVE AA2A33-01 3 12 300# RF GL02A0B2 12 GLOBE VALVE AA2A33-01 8 16 300# RF GL02A0B2 13 BUTTERFLY VALVE AA2A33-01 3 12 300# RF BT02A0I2 CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34 / BS 1873, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. 14 BUTTERFLY VALVE AA2A33-01 14 24 300# RF BT02A0I2 15 BALL VALVE AA2A33-01 1/2 2 800# THD BA04H0B1 , , , WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR ECP-VST-G-GEN-FT-001 499/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 16 BALL VALVE AA2A33-01 1/2 2 800# SW BA04F0B1 17 BALL VALVE AA2A33-01 1/2 1 1/2 300# PE BA02G0I2J CARBON STEEL, BALL VALVE, FLOATING, REDUCED PORT, ASTM A-105, ACCORDING TO ASME B16.34, PE - 6" NIPPLES WELDED + A106 GR B+SCH 160, BODY: 2 - 3 PIECES - SPLIT BODY INSERT SEATS & SEALS: VITON BALL: AISI 316 STEM: AISI CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 17 BALL VALVE AA2A33-01 1/2 1 1/2 300# PE BA02G0I2J 18 BALL VALVE AA2A33-01 2 4 300# RF BA02A0I2J 19 BALL VALVE AA2A33-01 6 36 300# RF BA02A0I2J 20 BALL VALVE AA2A33-01 3 12 300# RF BA02A0B1 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TESTS. CARBON STEEL, BALL VALVE LP RB, TRUNNION MOUNTED, REDUCED PORT, ASTM A- 216 GR. WCB, ACCORDING TO ASME B16.34/API 608, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: RAISED FACE CARBON STEEL, BALL VALVE LP RB, TRUNNION MOUNTED, REDUCED PORT, ASTM A- 216 GR. WCB, ACCORDING TO ASME B16.34/API 6D, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TEST, OTHER REQUIREMENTS: RAISED FACE CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 21 BALL VALVE AA2A33-01 14 36 300# RF BA02A0I1J 22 PLUG VALVE AA2A33-01 3 12 300# RF PL02A0B2 23 PLUG VALVE AA2A33-01 14 24 300# RF PL02A0B2 CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34/API 6D, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 24 PIPE AA2A33-01 1/2 1 1/2 PE 160 T-01 ), , , , , GEAR OPERATOR CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS ECP-VST-G-GEN-FT-001 500/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 25 PIPE AA2A33-01 2 2 BE 160 T-01 26 PIPE AA2A33-01 3 4 BE 80 T-01 27 PIPE AA2A33 01 6 20 BE 40 T 01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" 27 PIPE AA2A33-01 6 20 BE 40 T-01 28 PIPE AA2A33-01 22 22 BE 60 T-01 29 PIPE AA2A33-01 24 24 BE 40 T-01 30 PIPE AA2A33-01 26 28 BE 0,594 31 PIPE AA2A33-01 30 30 BE 0,625 32 PIPE AA2A33-01 36 36 BE 0,719 CARBON STEEL, E.F.W., ASTM A672 GR. C70 CL 12, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2", 100% X-RAY , , , B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, E.F.W., ASTM A672 GR. C70 CL 12, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2", 100% X-RAY CARBON STEEL, E.F.W., ASTM A672 GR. C70 CL 12, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2", 100% X-RAY 33 PIPE AA2A33-01 42 42 BE 0,875 34 ELBOW 45 DEGREES AA2A33-01 1/2 1 1/2 6000# SW ACCORDING TO PIPE SCHEDULE A-01 35 ELBOW 45 DEGREES AA2A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 36 ELBOW 45 DEGREES AA2A33-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-02 37 ELBOW 90 DEGREES AA2A33-01 1/2 1 1/2 6000# SW A-01 38 ELBOW 90 DEGREES AA2A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X- RAY CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, E.F.W., ASTM A672 GR. C70 CL 12, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2", 100% X-RAY 39 ELBOW 90 DEGREES AA2A33-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-02 2 4 1/2 1 1/2 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X- RAY CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.2540 CONCENTRIC REDUCER AA2A33-01 BW x PE ACCORDING TO PIPE SCHEDULE A-02 ECP-VST-G-GEN-FT-001 501/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 1/2 2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 CARBON STEEL CONCENTRIC REDUCING NIPPLE ASTM A 234 GR WPB CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 XXS A-02 ACCORDING CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 41 CONCENTRIC REDUCER AA2A33-01 A-02 42 CONCENTRIC REDUCER AA2A33-01 PE x MTH BW x MTH XXS 3/4 1 1/2 1/2 1 3 24 2 22 26 42 18 36 3 4 1/2 1 1/2 3/4 1 1/2 1/2 1 3 24 2 22 A-0245 CONCENTRIC REDUCER AA2A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY BW x BW ACCORDING TO PIPE SCHEDULE A-02 48 ECCENTRIC REDUCER AA2A33-01 A-02 47 ECCENTRIC REDUCER AA2A33-01 PE x MTH XXS 46 ECCENTRIC REDUCER AA2A33-01 44 CONCENTRIC REDUCER AA2A33-01 A-02BW x PE ACCORDING TO PIPE SCHEDULE BW x BW ACCORDING TO PIPE SCHEDULE A-02 43 CONCENTRIC REDUCER AA2A33-01 A-02PE x PE TO PIPE SCHEDULE 26 42 18 36 50 REDUCER INSERT AA2A33-01 1/2 2 6000# MxF 51 CAP AA2A33-01 1/2 1 1/2 6000# THD A-01 52 CAP AA2A33-01 1/2 1 1/2 6000# SW A-01 53 CAP AA2A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 54 CAP AA2A33-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-02 55 STRAIGHT TEE AA2A33-01 1/2 1 1/2 6000# SW A-01 49 ECCENTRIC REDUCER CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAYAA2A33-01 BW x BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, STRAIGHT TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 3/4 1 1/2 1/2 1 CARBON STEEL, REDUCER TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.1156 REDUCER TEE AA2A33-01 6000# SW x SW A-01 ECP-VST-G-GEN-FT-001 502/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 57 STRAIGHT TEE AA2A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 58 STRAIGHT TEE AA2A33-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-02 3 24 ACCORDING CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY 3 24 2 22 26 42 16 36 1 2 1/2 1 1/2 2 24 1/2 1 1/2 26 42 1/2 1 1/2 6 24 2 12 59 REDUCER TEE AA2A33-01 BW x BW ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25, 100% X- RAY A-01 ACCORDING 61 OLET AA2A33-01 6000# BW x THD CARBON STEEL, THREDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, BEVELED END AS PER ASME B16.25 A-01 A-02 CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A 105, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 63 OLET AA2A33-01 6000# BW x SW CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 60 REDUCER TEE AA2A33-01 BW x BW ACCORDING TO PIPE SCHEDULE A-01 A-02 64 OLET AA2A33-01 A-02 62 OLET AA2A33-01 6000# BW x BW ACCORDING TO PIPE SCHEDULE BW x SW ACCORDING TO PIPE SCHEDULE 26 42 12 16 66 PLUG AA2A33-01 1/2 2 6000# THD 67 COUPLING AA2A33-01 1/2 2 6000# THD A-01 68 COUPLING AA2A33-01 1/2 1 1/2 6000# SW x FTH A-01 69 COUPLING AA2A33-01 1/2 2 6000# SW A-01 70 HALF COUPLING AA2A33-01 1/2 2 6000# THD A-01 71 HALF COUPLING AA2A33-01 1/2 2 6000# SW A-01 ACCORDING 65 OLET AA2A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY A-02 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 72 NIPPLE AA2A33-01 1/2 2 THD ACCORDING TO SCHEDULE PIPE T-01CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100 & 200 mm ECP-VST-G-GEN-FT-001 503/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 73 NIPPLE AA2A33-01 1/2 1 1/2 PE x MTH ACCORDING TO SCHEDULE PIPE T-01 74 NIPPLE AA2A33-01 1/2 2 PE ACCORDING TO SCHEDULE PIPE T-01 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, PLAIN ENDS, L = 100 & 200 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100 & 200 mm 75 FLANGE AA2A33-01 1/2 1 1/2 300# RF ACCORDING TO SCHEDULE PIPE B-01 76 FLANGE AA2A33-01 2 24 300# RF ACCORDING TO PIPE SCHEDULE B-02 77 FLANGE AA2A33-01 26 42 300# RF ACCORDING TO PIPE SCHEDULE B-02 78 BLIND FLANGE AA2A33-01 1/2 24 300# RF B-03 79 BLIND FLANGE AA2A33-01 26 42 300# RF B-03 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END, 100% X-RAY CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END, 100% X-RAY CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING 80 ORIFICE FLANGE AA2A33-01 1 2 300# RF ACCORDING TO SCHEDULE PIPE 81 ORIFICE FLANGE AA2A33-01 3 24 300# RF ACCORDING TO SCHEDULE PIPE 82 BLIND PLATE AA2A33-01 14 24 300# RF B-03 83 SPACER RING AA2A33-01 14 30 300# RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS , ( NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A- 105. CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A- 105. ECP-VST-G-GEN-FT-001 504/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 84 PADDLE BLIND AA2A33-01 14 30 300# RF 85 FIGURE 8 AA2A33-01 1/2 12 300# RF 86 DRIP RINGS AA2A33-01 2 24 300# RF CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS; WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME 87 GASKET AA2A33-01 1/2 42 300# RF E-01 88 INSULATION KIT AA2A33-01 1 42 300# E-04 89 BOLTING AA2A33-01 P-01 B16.5, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 INSULATION KIT, DIMENSIONS AS PER MANUFACTURER'S STD, GASKET TYPE F WITH SEALS, INSULATING WASHERS, STEEL WASHERS AND INSULATING SLEEVES CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 505/761 Ite m PIPING ELEMENT CLA SS DN from (in) DN to (in) RATI NG FAC E SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKE T BALL/P LUG WEDGE OPERA T NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS 1 GATE VALVE A2A2 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A- 105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 740 100 A105 0,125 F8 STELLITE INTEGRAL SS304 SPIRAL WOUN D SOLID HAND WHELL A3-3F 1/2 - 1 1/2 800# 740 250 A105 0,125 F6 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-100 Diferencias en: Rango de Diámetros & Seats. Se deja la configuración de ECOPETROL GATE VALVE A3-3F 1/2 - 1 1/2 800# 740 250 A105 0,125 F6 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-101 FTH INCLUIR STELLITE SS304 ECOPETROL REFINERÍA PIPING CLASS AA2A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA2A33-01 B GATE VALVE A3-3F 1/2 - 1 1/2 800# 740 250 A105 0,125 F6 RENEWABL E SEAT RINGS SS304 SPIRAL WOUND SOLID HAND WHEEL VC-102 PE x FTH INCLUIR 2 GATE VALVE A2A2 3 12 300 RF CARBON STEEL, GATE VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 740 100 A216 GR WCB 0,125 F8 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUN D FLEXIB LE HAND WHELL A3-3F 2 - 10 300# 740 250 A216 GR.WC B 0,125 F6 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E HAND WHEEL VC-300 Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 3 GATE VALVE A2A2 14 24 300 RF CARBON STEEL, GATE VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE 740 100 A216 GR WCB 0,125 F8 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUN D FLEXIB LE GEAR A3-3F 12 - 24 300# 740 250 A216 GR.WC B 0,125 F6 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUND FLEXIBL E GEAR VC-350 Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL, , RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 CHECK VALVE A2A2 1/2 2 800 SW CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 740 100 A105 0,125 F8 STELLITE INTEGRAL SS304 SPIRAL WOUN D A3-3F 1/2 - 1 1/2 800# 740 250 A105 0,125 F6 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUND VR-100 Diferencias en: Rango de diámetros, Trim & Seats. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 506/761 Ite m PIPING ELEMENT CLA SS DN from (in) DN to (in) RATI NG FAC E SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKE T BALL/P LUG WEDGE OPERA T NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA2A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA2A33-01 B 5 CHECK VALVE A2A2 3 24 300 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 740 100 A216 GR WCB 0,125 F8 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUN D A3-3F 2 - 24 300# 740 250 A216 GR.WC B 0,125 F6 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUND VR-300 Diferencias en: Rango de diámetros & Trim. Se deja la configuración de ECOPETROL CARBON STEEL, GLOBE VALVE, ASTM A- 105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME Diferencias en: Rango de 6 GLOBE VALVE A2A2 1/2 2 800 SW B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 740 100 A105 0,125 F8 STELLITE INTEGRAL SS304 SPIRAL WOUN D HAND WHEEL A3-3F 1/2 - 1 1/2 800# 740 250 A105 0,125 F6 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUND HAND WHEEL VG-100 GLOBE VALVE RP FEMALE END RB Rango de diámetros, Trim & Seats. Se deja la configuración de ECOPETROL 7 GLOBE VALVE A2A2 3 12 300 RF CARBON STEEL, GLOBE VALVE, ASTM A- 216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 740 100 A216 GR WCB 0,125 F8 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUN D HAND WHEEL A3-3F 2 - 6 300# 740 250 A216 GR.WC B 0,125 F6 STELLITE RENEWABL E SEAT RINGS SS304 SPIRAL WOUND HAND WHEEL VG-300 GLOVE VALVE LP Diferencias en: Rango de diámetros, Trim & Seats. Se deja la configuración de ECOPETROL GLOBE VALVE A3-3F 8 - 14 300# 740 250 A216 GR.WC B 0,125 F6 STELLITE RENEWABL E SEAT SS304 SPIRAL WOUND GEAR VG-350 GLOVE VALVE LP INCLUIR 8 BUTTERFLY VALVE A2A2 3 12 300 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16 5 TESTS AS 740 100 A216 GR WCB 0,125 SS 316 DISC INCONEL LEVER A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASERATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, LEVER OPERATOR WCB DISC ESTA CLASE 9 BUTTERFLY VALVE A2A2 14 24 300 RF CARBON STEEL, BUTTERFLY VALVE, WAFER OR LUGGED TYPE , ASTM A-216 GR. WCB, ACCORDING TO API 609, RATING AS PER ASME B16.5, TESTS AS PER API 598, , 316 SS DISC, INCONEL SEAT, GEAR OPERATOR 740 100 A216 GR WCB 0,125 SS 316 DISC INCONEL GEAR A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASE 10 BALL VALVE A2A2 1/2 2 800 THD CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 740 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOATI NG LEVER A3-3F 1/2 - 1 1/2 800# 740 250 A105 0,125 FULL VITON SS 316 FULL PORT FLOATING LEVER VB-102 PE x FTH - 6" NIPPLES WELDED + A106 GR B+SCH 160 Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 507/761 Ite m PIPING ELEMENT CLA SS DN from (in) DN to (in) RATI NG FAC E SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKE T BALL/P LUG WEDGE OPERA T NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA2A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA2A33-01 B 11 BALL VALVE A2A2 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 740 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOATI NG LEVER A3-3F 1/2 - 1 1/2 800# 740 250 A105 0,125 FULL VITON SS 316 FULL PORT FLOATING LEVER VB-101 PE - 6" NIPPLES WELDED + A106 GR B+SCH 160 Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL BALL VALVE A3-3F 1/2 - 1 1/2 300# 740 250 A105 0,125 REDUC ED VITON SS 316 REDUCED PORT LEVER VB-100 PE - 6" NIPPLES WELDED + A106 GR B+SCH 160 INCLUIR BALL VALVE A3-3F 2 - 4 300# 740 250 A216 GR.WC B 0,125 REDUCED VITON SS 316 REDUCED PORT LEVER VB-300 FLG INCLUIR BALL VALVE A3-3F 6 - 24 300# 740 250 A216 GR.WC B 0,125 REDUCED VITON SS 316 REDUCED PORT GEAR VB-350 FLG INCLUIR CARBON STEEL, BALL VALVE, TRUNNION MOUNTED FULL PORT ASTM A 216 GR SS 316 Diferencias en: 12 BALL VALVE A2A2 3 12 300 RF MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 740 100 A216 GR WCB 0,125 F8 FULL FULL PORT TRUNNI ON MOUNT ED HAND WHEEL A3-3F 2 - 4 300# 740 250 A216 GR.WC B 0,125 FULL VITON SS 316 FULL PORT TRUNNION TYPE LEVER VB-301 Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 13 BALL VALVE A2A2 14 24 300 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 740 100 A216 GR WCB 0,125 F8 FULL SS 316 FULL PORT TRUNNI ON MOUNT ED GEAR A3-3F 6 - 16 300# 740 250 A216 GR.WC B 0,125 FULL VITON SS 316 FULL PORT TRUNNION TYPE GEAR VB-351 Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 14 PLUG VALVE A2A2 3 12 300 RF CARBON STEEL, PLUG VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 740 100 A216 GR WCB 0,125 F8 SS 316 HAND WHEEL A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASE 15 PLUG VALVE A2A2 14 24 300 RF CARBON STEEL, PLUG VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 740 100 A216 GR WCB 0,125 F8 SS 316 GEAR A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASE 16 PIPE A2A2 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A- 106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 740 100 A106 GR B 0,125 A3-3F 1/2 - 1 1/2 S160 - (1/2 - 3/4); S80 - (1 - 1 1/2) 740 250 A106 GR. B 0,125 PE - SEAMLESS Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 17 PIPE A2A2 3 24 BE 40 CARBON STEEL, SEAMLESS PIPE, ASTM A- 106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME 740 100 A106 GR B 0,125 A3-3F 2 - 24 S80 - (2); SSTD - (3 - 6); S20 - (8 - 24) 740 250 A106 GR. B 0,125 SEAMLESS - DOUBLE RANDOM LENGHT >= 2" 18 ELBOW 45 DEGREES A2A2 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 45 DEGREE ELBOW FEMALE END Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROLECOPETROL ECP-VST-G-GEN-FT-001 508/761 Ite m PIPING ELEMENT CLA SS DN from (in) DN to (in) RATI NG FAC E SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKE T BALL/P LUG WEDGE OPERA T NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA2A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA2A33-01 B 19 ELBOW 45 DEGREES A2A2 3 24 BW 40 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 740 100 A234 GR WPB 0,125 A3-3F 2 - 24 740 250 A234 GR.WPB 0,125 45 DEGREE ELBOW LR 20 ELBOW 90 DEGREES A2A2 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 90 DEGREE ELBOW FEMALE END Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 21 ELBOW 90 DEGREES A2A2 3 24 BW 40 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 740 100 A234 GR WPB 0,125 A3-3F 2 - 24 740 250 A234 GR.WPB 0,125 90 DEGREE ELBOW LR 22 CONCENTRIC REDUCEA2A2 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR 740 100 A234 GR WPB 0,125 A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASETHREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 WPB ESTA CLASE CONCENTRIC REDUCER A3-3F 2 - 4 740 250 A234 GR.WPB 0,125 BW x PE - CONCENTRIC SWAGE INCLUIR CONCENTRIC REDUCER A3-3F 1/2 - 2 S XXS 740 250 A234 GR.WPB 0,125 BW x MTH - CONCENTRIC REDUCING NIPPLE INCLUIR CONCENTRIC REDUCER A3-3F 3/4 - 1 1/2 S XXS 740 250 A234 GR.WPB 0,125 PE x MTH - CONCENTRIC REDUCING NIPPLE INCLUIR CONCENTRIC REDUCER A3-3F 3/4 - 1 1/2 740 250 A234 GR.WPB 0,125 PE x PE - CONCENTRIC REDUCING NIPPLE INCLUIR 23 CONCENTRIC REDUCEA2A2 3 24 BW 40 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 740 100 A234 GR WPB 0,125 A3-3F 3 - 24 740 250 A234 GR.WPB 0,125 BW x BW 24 ECCENTRIC REDUCERA2A2 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 740 100 A234 GR WPB 0,125 A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASE ECCENTRIC REDUCER A3-3F 3 - 4 740 250 A234 GR WPB 0,125 BW x PE - ECCENTRIC SWAGE INCLUIR ECCENTRIC REDUCER A3-3F 3/4 - 1 1/2 S XXS 740 250 A234 GR.WPB 0,125 PE x MTH - ECCENTRIC REDUCING NIPPLE INCLUIR 25 ECCENTRIC REDUCERA2A2 3 24 BW 40 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 740 100 A234 GR WPB 0,125 A3-3F 4 - 24 740 250 A234 GR.WPB 0,125 BW x BW 26 REDUCER INSERT A2A2 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 740 100 A105 0,125 A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASE 27 CAP A2A2 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 FTH Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 28 CAP A2A2 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 SW Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 509/761 Ite m PIPING ELEMENT CLA SS DN from (in) DN to (in) RATI NG FAC E SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKE T BALL/P LUG WEDGE OPERA T NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA2A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA2A33-01 B 29 CAP A2A2 3 24 BW 40 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 740 100 A234 GR WPB 0,125 A3-3F 2 - 24 740 250 A234 GR.WPB 0,125 BW 30 STRAIGHT AND REDUCA2A2 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 31 STRAIGHT AND REDUCA2A2 3 24 BW 40 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 740 100 A234 GR WPB 0,125 A3-3F 2 - 24 740 250 A234 GR.WPB 0,125 32 OLET A2A2 1/2 2 6000 THD CARBON STEEL, THREDOLET, ASTM A- 105, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 740 100 A105 0,125 A3-3F NO EXISTE EN ESTA CLASE 740 250 0,125 NO EXISTE EN ESTA CLASE 33 OLET A2A2 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 740 100 A105 0,125 A3-3F NO EXISTE EN ESTA CLASE 740 250 0,125 NO EXISTE EN ESTA CLASE OLET A3-3F 2 - 24 6000# 740 250 A105 0,125 BW x SW - SOCKOLET INCLUIR 34 OLET A2A2 3 24 BW 40 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 740 100 A234 GR WPB 0,125 A3-3F 6 - 24 740 250 A105 0,125 BW x BW Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 35 PLUG A2A2 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 740 250 A105 0,125 MTH - ROUND HEAD TYPE Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 36 COUPLING A2A2 1/2 2 6000 THD CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 FTH Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL COUPLING A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 SW x FTH INCLUIR Diferencias en: 37 COUPLING A2A2 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 38 HALF COUPLING A2A2 1/2 2 6000 THD CARBON STEEL, HALF COUPLING, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 PE x FTH Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 39 HALF COUPLING A2A2 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A- 105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 6000# 740 250 A105 0,125 PE x SW Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 40 NIPPLE A2A2 1/2 2 THD 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 740 100 A106 GR B 0,125 A3-3F 1/2 - 1 1/2 S XXS 740 250 A106 GR. B 0,125 MTH - L = 100 mm NIPPLE A3-3F 1/2 - 1 1/2 S XXS 740 250 A106 GR. B 0,125 PE x MTH - L=100 y 200 mm INCLUIR 41 NIPPLE A2A2 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER 740 100 A106 GR B 0,125 A3-3F 1/2 - 1 1/2 S 160 740 250 A106 GR. B 0,125 PE - L=100 y 200 mm ECP-VST-G-GEN-FT-001 510/761 Ite m PIPING ELEMENT CLA SS DN from (in) DN to (in) RATI NG FAC E SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKE T BALL/P LUG WEDGE OPERA T NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA2A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA2A33-01 B 42 FLANGE A2A2 1/2 2 300 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 740 100 A105 0,125 A3-3F 1/2 - 1 1/2 300 740 250 A105 0,125 FLG x SW - SOCKETWELD FLANGE Diferencias en: Rango de diámetros. Se deja la configuración de ECOPETROL 43 FLANGE A2A2 3 24 300 RF 40 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 740 100 A105 0,125 A3-3F 2 - 24 300 740 250 A105 0,125 FLG x BW - WELDNECK FLANGE 44 BLIND FLANGE A2A2 1/2 24 300 RF CARBON STEEL, BLIND FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 740 100 A105 0,125 A3-3F 1/2 - 24 300 740 250 A105 0,125 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING 45 ORIFICE FLANGE A2A2 1 2 300 RF 160 ( NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 740 100 A105 0,125 A3-3F 46 ORIFICE FLANGE A2A2 3 24 300 RF 40 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS 740 100 A105 0,125 A3-3F 47 BLIND PLATE A2A2 14 24 300 RF CARBON STEEL, BLIND PLATE, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 740 100 A516 GR 70 0,125 A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASE 48 SPACER RING A2A2 14 24 300 RF CARBON STEEL, SPACER RING, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 740 100 A516 GR 70 0,125 A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASE 49 FIGURE 8 A2A2 1/2 12 300 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 740 100 A516 GR 70 0,125 A3-3F 1/2 - 24 300 740 250 A516 GR. 70 0,125 SPECTACLE BLIND F8S Diferencias en: Rango de diámetros. Se deja el rango de diámetros de TIPIEL 740 FLG x BW - COUPLE ORIF.WN-FLG 1/2" TH-TAPA105 0,1252 - 24 300 250 50 DRIP RINGS A2A2 2 24 300 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 740 100 A516 GR 70 0,125 A3-3F 740 250 0,125 NO EXISTE EN ESTA CLASE 51 GASKET A2A2 1/2 24 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 740 100 SS 304 0,125 A3-3F 1/2 - 24 300 740 250 SS 304 0,125 SPIRAL WOUND GASKET - FLEXITALLIC CG, 1/8" THK INSULATION KIT A3-3F 1 - 24 300 740 250 0,125 GAKET TYPE F WITH SEALS, INSULATING WASHERS, STEEL WASHERS AND INCLUIR ECP-VST-G-GEN-FT-001 511/761 Ite m PIPING ELEMENT CLA SS DN from (in) DN to (in) RATI NG FAC E SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM PORT SEATS GASKE T BALL/P LUG WEDGE OPERA T NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA2A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA2A33-01 B 52 BOLTING A2A2 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 740 100 A193 GR B7 0,125 A3-3F 740 250 Stud A193/B7 - Nuts A194/2H 0,125 AMARILLO ITEMS NUEVOS EN CLASES CONTRATO MARCO GRIS OSCUPO ITEMS QUE NO EXISTEN EN CLASES CONTRATO MARCO GRIS CLARO ITEMS QUE HAY DIFERENCIA CON RELACION A CLASES REFINERIA BLANCO ITEMS QUE SON IGUALES NOTES: ECP-VST-G-GEN-FT-001 512/761 Elaborado 25/03/11 CLASS 600 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 1350 ASTM A106 GR. B DATE: 12-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 210 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1480 ETHANE ETA 200 1360 ETHYLENE ETI 300 1310 METHANOL MEL 400 1265 PROPYLENE PPN 500 1205 BOILER FEED WATER BFW 600 1135 POLYETHYLENE + ETHYLENE LPE 650 1100 HIGH PRESSURE STEAM HPS 700 1060 CRUDE CRU 750 1015 ASOCIATED GAS ASG 800 825 PRODUCED WATER PWA CORROSION ALLOWANCE POR: 1/8" RF AA3A33-01 FLANGE FINISH ANSI RATING ASTM A 672 GR. C70 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 513/761 Elaborado 25/03/11 CLASS 600 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 1350 ASTM A106 GR. B DATE: 12-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 210 CORROSION ALLOWANCE POR: 1/8" RF AA3A33-01 FLANGE FINISH ANSI RATING ASTM A 672 GR. C70 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ECP-VST-G-GEN-FT-001 514/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AA3A33-01 1/2 2 800# SW GA04F0B2 COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 2 GATE VALVE AA3A33-01 3 12 600# RF GA03A0B1 3 GATE VALVE AA3A33-01 14 24 600# RF GA03A0B1 CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600 / 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 4 GATE VALVE AA3A33-01 26 36 600# RF GA03A0B1 CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600 / 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16.47, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR ECP-VST-G-GEN-FT-001 515/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 5 CHECK VALVE AA3A33-01 1/2 2 800# SW CL04F0B2 CARBON STEEL, (LIFT) SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT. ACC. TO API 602 CARBON STEEL SWING CHECK VALVE SUITABLE FOR HORIZONTAL 6 CHECK VALVE AA3A33-01 3 36 600# RF CK03A0B1 7 GLOBE VALVE AA3A33-01 1/2 2 800# SW GL04F0B2 CARBON STEEL, GLOBE VALVE, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34/BS 1873, TESTS AS PER API CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34/API 6D, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . CARBON STEEL, GLOBE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34/API 602, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR 8 GLOBE VALVE AA3A33-01 3 12 600# RF GL03A0B2 9 GLOBE VALVE AA3A33-01 6 16 600# RF GL03A0B2 10 BALL VALVE AA3A33-01 1/2 2 800# SW BA04F0B1 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RAISED FACE, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR ECP-VST-G-GEN-FT-001 516/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 11 BALL VALVE AA3A33-01 1/2 1 1/2 800# PE BA04G0I2J CARBON STEEL, BALL VLV EXT.FEM.END W/2NIP RB, REDUCED PORT, ASTM A105, ACCORDING TO ASME B16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: FLOATING TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: WITH 6" NIPPLES WELDED +A106 GR B+SCH160, PE 12 BALL VALVE AA3A33-01 3 12 600# RF BA03A0B1 13 BALL VALVE AA3A33-01 2 4 600# RF BA03A0I2J 14 BALL VALVE AA3A33-01 6 20 600# RF BA03A0I2J CARBON STEEL, BALL VALVE LP RB, REDUCED PORT, ASTM A-216 GR. WCB, ACCORDING TO ASME B16.34/API 608, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TEST, RAISED FACE CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR CARBON STEEL, BALL VALVE LP RB, REDUCED PORT, ASTM A-216 GR. WCB, ACCORDING TO ASME B16.34/API 608, DIMENSIONS AS PER ASME B16.10, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, RAISED FACE 15 BALL VALVE AA3A33-01 14 36 600# RF BA03A0B1 16 PLUG VALVE AA3A33-01 3 12 600# RF PL03A0B2 17 PLUG VALVE AA3A33 01 14 24 600# RF PL03A0B2 , CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34/API 608, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR CARBON STEEL, PLUG VALVE, ASTM A-216 GR. WCB, RB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16 34 TESTS AS PER API 598 (FOR HIGH TEMPERATURES &17 PLUG VALVE AA3A33-01 14 24 600# RF PL03A0B216.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR ECP-VST-G-GEN-FT-001 517/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 18 PIPE AA3A33-01 1/2 1 1/2 PE 160 T-01 19 PIPE AA3A33-01 2 2 BE 160 T-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 20 PIPE AA3A33-01 3 24 BE 80 T-01 21 PIPE AA3A33-01 26 26 BE 1,007 MWT T-01 22 PIPE AA3A33-01 28 28 BE 1,074 MWT T-01 23 PIPE AA3A33-01 30 30 BE 1,142 MWT T-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, D.S.A.W PIPE, ASTM A 672 GR. C70, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, D.S.A.W PIPE, ASTM A 672 GR. C70, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, D.S.A.W PIPE, ASTM A 672 GR. C70, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 24 PIPE AA3A33-01 36 36 BE 1,346 MWT T-01 25 ELBOW 45 DEGREES AA3A33-01 1/2 2 6000# SW A-01 26 ELBOW 45 DEGREES AA3A33-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-02 27 ELBOW 45 DEGREES AA3A33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 28 ELBOW 90 DEGREES AA3A33 01 1/2 2 6000# SW A 01 CARBON STEEL, D.S.A.W PIPE, ASTM A 672 GR. C70, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 ELBOW 90 DEGREES AA3A33-01 1/2 2 6000# SW A-01 29 ELBOW 90 DEGREES AA3A33-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, ELBOW 90 DEGREES, ASTM A 105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 518/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 30 ELBOW 90 DEGREES AA3A33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 2 4 1/2 1 1/2 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 31 CONCENTRIC REDUCER AA3A33-01 BW x PE ACCORDING TO PIPE SCHEDULE A-02 2 4 1/2 1 1/2 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 3 24 2 20 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED ENDS AS PER ASME B1.20.1 XXS A-02 AA3A33-01 PE x MTH XXS 32 CONCENTRIC REDUCER AA3A33-01 BW x MTH A-02 34 CONCENTRIC REDUCER AA3A33-01 PE x PE ACCORDING TO PIPE SCHEDULE A-02 33 CONCENTRIC REDUCER 35 CONCENTRIC REDUCER AA3A33-01 MTH x MTH XXS A-02 A-02 36 CONCENTRIC REDUCER AA3A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 26 36 24 30 2 4 1/2 1 1/2 3/4 1 1/2 1/2 1 3 24 2 20 26 36 2 30 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED ENDS AS PER ASME B1.20.1 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X RAY ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY AA3A33-01 BW x PE ACCORDING TO PIPE SCHEDULE 37 CONCENTRIC REDUCER AA3A33-01 BW x BW A-02 39 ECCENTRIC REDUCER AA3A33-01 MTH x MTH ACCORDING TO PIPE SCHEDULE A-02 38 ECCENTRIC REDUCER 41 ECCENTRIC REDUCER AA3A33-01 BW x BW ACCORDING TO PIPE SCHEDULE A-02 40 ECCENTRIC REDUCER AA3A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-02 24 30 100% X-RAYPIPE SCHEDULE ECP-VST-G-GEN-FT-001 519/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 42 REDUCER INSERT AA3A33-01 1/2 2 6000# MxF 43 CAP AA3A33-01 1/2 2 6000# THD A-01 44 CAP AA3A33 01 1/2 2 6000# SW A 01 CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, 44 CAP AA3A33-01 1/2 2 6000# SW A-01 45 CAP AA3A33-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-02 46 CAP AA3A33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 47 STRAIGHT TEE AA3A33-01 1/2 1 1/2 6000# SW A-01 3/4 2 1/2 1 1/2 49 STRAIGHT TEE AA3A33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, STRAIGHT TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A 105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 48 REDUCER TEE CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 AA3A33-01 6000# SW x SW A-01 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 50 STRAIGHT TEE AA3A33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-02 3 24 2 20 26 36 24 30 2 24 1/2 1 1/2 26 36 1/2 1 1/2 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, 100% X-RAY CARBON STEEL, SOCKOLET, ASTM A 105, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED ENDS AS PER ASME B16.25 A-0154 OLET AA3A33-01 6000# BW x SW A-02 A-02 52 REDUCER TEE AA3A33-01 BW x BW ACCORDING TO PIPE SCHEDULE 53 OLET AA3A33-01 6000# BW x SW ACCORDING TO PIPE SCHEDULE A-01 ACCORDING TO PIPE SCHEDULE 51 REDUCER TEE AA3A33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 520/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 3 24 1/2 1 1/2 26 36 1/2 1 1/2 CARBON STEEL, THREADOLET, ASTM A-105, DIMENSIONS AS PER MSS- SP-97, BEVELED END AS PER ASME B16.25, FEMALE THREADED END AS PER ASME B1.20.1, NPT AA3A33-01 6000# BW x FTH ACCORDING TO PIPE SCHEDULE A-0156 OLET OLET AA3A33-01 6000# BW x FTH ACCORDING TO PIPE SCHEDULE CARBON STEEL, THREADOLET, ASTM A-105, DIMENSIONS AS PER MSS- SP-97, BEVELED END AS PER ASME B16.25, FEMALE THREADED END AS PER ASME B1.20.1, NPT A-01 6 24 2 12 26 36 16 16 59 PLUG AA3A33-01 1/2 2 6000# THD 60 COUPLING AA3A33-01 1/2 2 6000# SW A-01 61 COUPLING AA3A33-01 1/2 1 1/2 6000# SW x FTH A-01 CARBON STEEL, WELDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL COUPLING ASTM A 105 DIMENSIONS AS PER ASME CARBON STEEL, WELDOLET, ASTM A-105, DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 58 OLET AA3A33-01 BW x BW ACCORDING TO PIPE SCHEDULE A-01 57 OLET AA3A33-01 BW x BW ACCORDING TO PIPE SCHEDULE 62 COUPLING AA3A33-01 1/2 1 1/2 6000# FTH A-01 63 HALF COUPLING AA3A33-01 1/2 2 6000# SW A-01 64 NIPPLE AA3A33-01 1/2 2 PE ACCORDING TO PIPE SCHEDULE T-01 65 NIPPLE AA3A33-01 1/2 1 1/2 MTH ACCORDING TO PIPE SCHEDULE T-01 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS, L = 100 & 200 mm CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 521/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 66 NIPPLE AA3A33-01 1/2 1 1/2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 67 FLANGE AA3A33-01 1/2 2 600# RF ACCORDING TO PIPE SCHEDULE B-01 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS & MALE THREADED ENDS, L = 100 & 200 mm CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 68 FLANGE AA3A33-01 1/2 2 600# RF ACCORDING TO PIPE SCHEDULE 69 FLANGE AA3A33-01 3 24 600# RF ACCORDING TO PIPE SCHEDULE B-02 70 FLANGE AA3A33-01 26 36 600# RF ACCORDING TO PIPE SCHEDULE B-02 71 BLIND FLANGE AA3A33-01 1/2 2 600# RF B-03 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END, 100% X-RAY CARBON STEEL, LONG WELDNECK FLANGE, ASTM A105, DIMENSIONS AS PER MANUFACTURER'S STD, RAISED FACE, FLG X PE CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END, FLG x FTH - PROVIDED WITH 1/2" FTHD TAPER BORE CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 72 BLIND FLANGE AA3A33-01 1/2 24 600# RF B-03 73 BLIND FLANGE AA3A33-01 26 36 600# RF B-03 74 ORIFICE FLANGE AA3A33-01 1 2 600# RF ACCORDING TO PIPE SCHEDULE CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END, 100% X-RAY CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 1/2 FTHD TAPER BORE ECP-VST-G-GEN-FT-001 522/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 75 ORIFICE FLANGE AA3A33-01 3 24 600# RF ACCORDING TO PIPE SCHEDULE 76 BLIND PLATE AA3A33-01 14 24 600# RF CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16 5 RAISED FACE ENDS 77 BLIND PLATE AA3A33-01 26 36 600# RF 78 PADDLE BLIND AA3A33-01 14 30 600# RF 79 SPACER RING AA3A33-01 14 30 600# RF 80 FIGURE 8 AA3A33-01 1/2 12 600# RF 81 DRIP RINGS AA3A33-01 2 24 600# RF CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS STAINLESS STEEL SPIRAL WOUND GASKET WITH GRAPHITE FILLER CARBON STEEL, BLIND PLATE, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE ENDS ASME B16.5, RAISED FACE ENDS CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE 82 GASKET AA3A33-01 1/2 36 600# RF E-01 83 UNION AA3A33-01 1/2 1 1/2 6000# SW 84 STRAINER "Y" TYPE AA3A33-01 1/2 2 600# RF 85 STEAM TRAPS AA3A33-01 1/2 3/4 800# SW CARBON STEEL, STEAM TRAPS, ASTM A105, THERMODYNAMIC TYPE WITH "Y" STRAINER, DIMENSIONS AS PER MANUFACTURER'S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS ASTM A 193 GR B7 / ASTM A 194 GR 2H THREADED STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 / ASME B16.47 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAINER "Y" TYPE, ASTM A105, DIMENSIONAS AS PER MANUF.S STD / FLG CONN. FOR ASME B16.5, AISI 316 SCREEN, 1/2" FTHD DRAIN WITH PLUG, RAISED FACE. 86 BOLTING AA3A33-01 P-01 HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 523/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM POR T SEATS GASK ET BALL/ PLUG WED GE OPE RAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GAS KET BALL/PL UG WEDG E OPER AT TAG VALV E NOTES ANÁLISIS 1 GATE VALVE A3A2 1/2 2 800 SW CARBON STEEL, GATE VALVE, ASTM A- 105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 1480 100 A105 0,125 F8 STELLIT E INTEGR AL SS304 SPIRA L WOU ND SOLI D HAN D WH EEL A3-6F 1/2 - 1 1/2 800# 1480 250 A105 0,125 F6 STELLI TE RENEW ABLE SEAT RINGS SS30 4 SPIR AL WOU ND SOLID HAND WHEE L VC- 100 GATE VALVE RP FEMALE ENDS RB Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL 2 GATE VALVE A3A2 3 12 600 RF CARBON STEEL, GATE VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 1480 100 A216 GR WCB 0,125 F8 STELLIT E RENEW ABLE SEAT RINGS SS304 SPIRA L WOU ND FLEX IBLE HAN D WH EEL A3-6F 2 - 6 600# 1480 250 A216 GR.WCB 0,125 F6 STELLI TE RENEW ABLE SEAT RINGS SS30 4 SPIR AL WOU ND FLEXIB LE HAND WHEE L VC- 600 GATE VALVE LP Diferencias en: Rango de Diámetros, & Trim. Se deja la configuración de ECOPETROL 3 GATE VALVE A3A2 14 24 600 RF CARBON STEEL, GATE VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, GEAR OPERATOR 1480 100 A216 GR WCB 0,125 F8 STELLIT E RENEW ABLE SEAT RINGS SS304 SPIRA L WOU ND FLEX IBLE GEA R A3-6F 8 - 24 600# 1480 250 A216 GR.WCB 0,125 F6 STELLI TE RENEW ABLE SEAT RINGS SS30 4 SPIR AL WOU ND FLEXIB LE GEAR VC- 650 GATE VALVE LP Diferencias en: Rango de Diámetros, & Trim. Se deja la configuración de ECOPETROL CARBON STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A- 105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME STELLIT E SS304 SPIRA 1/2 - 1 STELLI TE RENEW SS30 4 SPIR VR- CHECK VALVE Diferencias en: Rango de Diámetros Trim & ECOPETROL REFINERÍA PIPING CLASS AA3A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA3A33-01 B 4 CHECK VALVE A3A2 1/2 2 800 SW SOCKET WELDING ENDS AS PER ASMEB16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED CAP, 316 SS BALL, STELLITE INTEGRAL SEAT, . 1480 100 A105 0,125 F8 E INTEGR AL L WOU ND A3-6F 1/2 - 1 1/2 800# 1480 250 A105 0,125 F6 RENEW ABLE SEAT RINGS SPIR AL WOU ND VR- 100 LIFT FEM, ENDS RB Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL 5 CHECK VALVE A3A2 3 24 600 RF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 1480 100 A216 GR WCB 0,125 F8 STELLIT E RENEW ABLE SEAT RINGS SS304 SPIRA L WOU ND A3-6F 2 - 20 600# 1480 250 A216 GR.WCB 0,125 F6 STELLI TE RENEW ABLE SEAT RINGS SS30 4 SPIR AL WOU ND VR- 600 CHECK VALVE SWING Diferencias en: Rango de Diámetros, & Trim. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 524/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM POR T SEATS GASK ET BALL/ PLUG WED GE OPE RAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GAS KET BALL/PL UG WEDG E OPER AT TAG VALV E NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA3A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA3A33-01 B 6 GLOBE VALVE A3A2 1/2 2 800 SW CARBON STEEL, GLOBE VALVE, ASTM A- 105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND GASKET WITH GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 1480 100 A105 0,125 F8 STELLIT E INTEGR AL SS304 SPIRA L WOU ND HAN D WH EEL A3-6F 1/2 - 1 1/2 800# 1480 250 A105 0,125 F6 STELLI TE RENEW ABLE SEAT RINGS SS30 4 SPIR AL WOU ND HAND WHEE L VG- 100 GLOBE VALVE RP FEMALE ENDS RB Diferencias en: Rango de Diámetros, Trim & Seats. Se deja la configuración de ECOPETROL 7 GLOBE VALVE A3A2 3 12 600 RF CARBON STEEL, GLOBE VALVE, ASTM A- 216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM F8, AISI 304 SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 1480 100 A216 GR WCB 0,125 F8 STELLIT E RENEW ABLE SEAT RINGS SS304 SPIRA L WOU ND HAN D WH EEL A3-6F 2 - 4 600# 1480 250 A216 GR.WCB 0,125 F6 STELLI TE RENEW ABLE SEAT RINGS SS30 4 SPIR AL WOU ND HAND WHEE L VG- 600 Diferencias en: Rango de Diámetros, & Trim. Se deja la configuración de ECOPETROL GLOBE VALVE A3-6F 6 - 14 600# 1480 250 A216 GR.WCB 0,125 F6 STELLI TE RENEW SS30 4 SPIR GEAR VG-650 INCLUIR 8 BALL VALVE A3A2 1/2 2 800 SW CARBON STEEL, BALL VALVE, FLOATING, FULL PORT, ASTM A-105, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, LEVER OPERATOR 1480 100 A105 0,125 F8 FULL SS 316 FULL PORT FLOAT ING LEV ER A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE BALL VALVE A3-6F 1/2 - 1 1/2 800# 1480 250 A105 0,125 REDU CED VITON SS 316 REDUCE D PORT FLOATIN G LEVE R VB- 100 PE - 6" NIPPLES WELDED + A106 GR.B + SCH 160 INCLUIR CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, SS 316 FULL HAN 9 BALL VALVE A3A2 3 12 600 RF DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, HANDWHEEL OPERATOR 1480 100 A216 GR WCB 0,125 F8 FULL PORT TRUN NION MOUN TED HAN D WH EEL A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE BALL VALVE A3-6F 2 - 4 600# 1480 250 A216 GR.WCB 0,125 REDU CED VITON SS 316 REDUCE D PORT LEVE R VB- 600 BALL VALVE LP RB INCLUIR BALL VALVE A3-6F 6 - 14 600# 1480 250 A216 GR.WCB 0,125 REDU CED VITON SS 316 REDUCE D PORT GEAR VB-650 BALL VALVE LP RB INCLUIR ECP-VST-G-GEN-FT-001 525/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM POR T SEATS GASK ET BALL/ PLUG WED GE OPE RAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GAS KET BALL/PL UG WEDG E OPER AT TAG VALV E NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA3A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA3A33-01 B 10 BALL VALVE A3A2 14 24 600 RF CARBON STEEL, BALL VALVE, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TRIM F8, BOLTED BONNET, 316 SS BALL, GEAR OPERATOR 1480 100 A216 GR WCB 0,125 F8 FULL SS 316 FULL PORT TRUN NION MOUN TED GEA R A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE 11 PLUG VALVE A3A2 3 12 600 RF CARBON STEEL, PLUG VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, HANDWHEEL OPERATOR 1480 100 A216 GR WCB 0,125 F8 SS 316 HAN D WH EEL A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE 12 PLUG VALVE A3A2 14 24 600 RF CARBON STEEL, PLUG VALVE, ASTM A- 216 GR. WCB, ACCORDING TO API 599, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598 (FOR HIGH TEMPERATURES & PRESSURES, AS HIGH PRESSURE STEAM, VALVES SHALL BE LUBRICATED TYPE), TRIM F8, BOLTED BONNET, 316 SS PLUG, NON LUBRICATED, GEAR OPERATOR 1480 100 A216 GR WCB 0,125 F8 SS 316 GEA R A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE 13 PIPE A3A2 1/2 2 PE 160 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 1480 100 A106 GR B 0,125 A3-6F 1/2 - 1 1/2 S160 - (1/2 - 1 1/2) 1480 250 A106 GR.B 0,125 PE - SEAMLESS Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 14 PIPE A3A2 3 24 BE 80 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25 1480 100 A106 GR B 0,125 A3-6F 2 - 24 S160 - (2); SXS - (3 - 8); S80 - (10 - 24) 1480 250 A106 GR.B 0,125 DOUBLE RANDOM LENGHT >= 2" Diferencias en: Rango de Diámetros y espesores (schedule). Se deja la configuración de ECOPETROL 15 ELBOW 45 DEGREE A3A2 1/2 2 6000 SW CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 1480 100 A105 0,125 A3-6F 1/2 - 1 1/2 6000 1480 250 A105 0,125 45 DEGREE ELBOW FEMALE END Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 526/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM POR T SEATS GASK ET BALL/ PLUG WED GE OPE RAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GAS KET BALL/PL UG WEDG E OPER AT TAG VALV E NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA3A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA3A33-01 B 16 ELBOW 45 DEGREE A3A2 3 24 BW 80 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 1480 100 A234 GR WPB 0,125 A3-6F 2 - 24 1480 250 A234 GR. WPB 0,125 45 DEGREE ELBOW LR 17 ELBOW 90 DEGREE A3A2 1/2 2 6000 SW CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 1480 100 A105 0,125 A3-6F 1/2 - 1 1/2 6000 1480 250 A105 0,125 90 DEGREE ELBOW FEMALE END 18 ELBOW 90 DEGREE A3A2 3 24 BW 80 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 1480 100 A234 GR WPB 0,125 A3-6F 2 - 24 1480 250 A234 GR. WPB 0,125 90 DEGREE ELBOW LR 19 CONCENTRIC REDU A3A2 1/2 2 160 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 1480 100 A234 GR WPB 0,125 A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE CONCENTRIC REDUCER A3-6F 2 - 4 1480 250 A234 GR. WPB 0,125 BW x PE - CONCENTRIC INCLUIR CONCENTRIC REDUCER A3-6F 2 - 4 S XXS 1480 250 A234 GR. WPB 0,125 BW x MTH - CONCENTRIC INCLUIR CONCENTRIC REDUCER A3-6F 3/4 - 1 1/2 S XXS 1480 250 A234 GR. WPB 0,125 PE x MTH - CONCENTRIC C G INCLUIR CONCENTRIC REDUCER A3-6F 3/4 - 1 1/2 1480 250 A234 GR. WPB 0,125 PE x PE - CONCENTRIC INCLUIR CONCENTRIC REDUCER A3-6F 3/4 - 1 1/2 S XXS 1480 250 A106 GR.B 0,125 MTH x MTH - CONCENTRIC REDUCING NIPPLE INCLUIR 20 CONCENTRIC REDU A3A2 3 24 BW 80 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 1480 100 A234 GR WPB 0,125 A3-6F 4 - 24 1480 250 A234 GR. WPB 0,125 BW x BW - CONCENTRIC REDUCER 21 ECCENTRIC REDUC A3A2 1/2 2 160 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END OR THREADED END AS PER ASME B1.20.1 OR BEVELED END AS PER ASME B16.25 1480 100 A234 GR WPB 0,125 A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE ECCENTRIC REDUCER A3-6F 2 - 4 1480 250 A234 GR. WPB 0,125 BW x PE - ECCENTRIC SWAGE INCLUIR ECCENTRIC REDUCER A3-6F 3/4 - 1 1/2 S XXS 1480 250 A234 GR. WPB 0,125 MTH x MTH - ECCENTRIC REDUCING NIPPLE INCLUIR 22 ECCENTRIC REDUC A3A2 3 24 BW 80 CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25 1480 100 A234 GR WPB 0,125 A3-6F 4 - 24 1480 250 A234 GR. WPB 0,125 BW x BW ASME B16.25 23 REDUCER INSERT A3A2 1/2 2 6000 MxF CARBON STEEL, REDUCER INSERT, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 1480 100 A105 0,125 A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE 24 CAP A3A2 1/2 2 6000 THD CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 1480 100 A105 0,125 A3-6F 1/2 - 1 1/2 6000# 1480 250 A105 0,125 FTH Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 25 CAP A3A2 1/2 2 6000 SW CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 1480 100 A105 0,125 A3-6F 1/2 - 1 1/2 6000# 1480 250 A105 0,125 Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL ECP-VST-G-GEN-FT-001 527/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM POR T SEATS GASK ET BALL/ PLUG WED GE OPE RAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GAS KET BALL/PL UG WEDG E OPER AT TAG VALV E NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA3A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA3A33-01 B 26 CAP A3A2 3 24 BW 80 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 1480 100 A234 GR WPB 0,125 A3-6F 2 - 24 1480 250 A234 GR. WPB 0,125 27 STRAIGHT AND RED A3A2 1/2 2 6000 SW CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 1480 100 A105 0,125 A3-6F 1/2 - 2 6000# 1480 250 A105 0,125 TEE - (1/2 - 1 1/2); TEER - (3/4 - 2) 28 STRAIGHT AND RED A3A2 3 24 BW 80 CARBON STEEL, STRAIGHT AND REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 1480 100 A234 GR WPB 0,125 A3-6F 2 - 24 1480 250 A234 GR. WPB 0,125 TEE - (2 - 24); TEER - (3 - 24) 29 OLET A3A2 1/2 2 6000 SW CARBON STEEL, SOCKOLET, ASTM A- 105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 1480 100 A105 0,125 A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE OLET A3-6F 2 - 24 6000# 1480 250 A105 0,125 BW x SW - SOCKOLET INCLUIR OLET A3-6F 3 - 24 6000# 1480 250 A105 0,125 BW x FTH - THREADOLET INCLUIR 30 OLET A3A2 3 24 BW 80 CARBON STEEL, WELDOLET, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 1480 100 A234 GR WPB 0,125 A3-6F 6 - 24 1480 250 A105 0,125 BW x BW - WELDOLET Diferencias en: Rango de Diámetros & Material. Se deja la configuración de ECOPETROL 31 PLUG A3A2 1/2 2 6000 THD CARBON STEEL, PLUG SOLID, ROUND HEAD, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 1480 100 A105 0,125 A3-6F 1/2 - 1 1/2 1480 250 A105 0,125 MTH - ROUND HEAD TYPE Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL 32 COUPLING A3A2 1/2 2 6000 SW CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 1480 100 A105 0,125 A3-6F 1/2 - 1 1/2 6000# 1480 250 A105 0,125 Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL COUPLING A3-6F 1/2 - 1 1/2 6000# 1480 250 A105 0,125 SW x FTH INCLUIR COUPLING A3-6F 1/2 - 1 1/2 6000# 1480 250 A105 0,125 FTH INCLUIR 33 HALF COUPLING A3A2 1/2 2 6000 SW CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 1480 100 A105 0,125 A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE ECP-VST-G-GEN-FT-001 528/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM POR T SEATS GASK ET BALL/ PLUG WED GE OPE RAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GAS KET BALL/PL UG WEDG E OPER AT TAG VALV E NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA3A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA3A33-01 B 34 NIPPLE A3A2 1/2 2 PE 160 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 1480 100 A106 GR B 0,125 A3-6F 1/2 - 1 1/2 1480 250 A106 GR.B 0,125 PE - L = 100; 150; 200 mm Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL NIPPLE A3-6F 1/2 - 1 1/2 S XXS 1480 250 A106 GR.B 0,125 MTH - L = 100; 200 mm INCLUIR NIPPLE A3-6F 1/2 - 1 1/2 S XXS 1480 250 A106 GR.B 0,125 PE x MTH - L = 100; 200 mm INCLUIR 35 FLANGE A3A2 1/2 2 600 RF 160 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 1480 100 A105 0,125 A3-6F 1/2 - 1 1/2 600 1480 250 A105 0,125 FLG x SW - SOCKETWELD FLANGE Diferencias en: Rango de Diámetros. Se deja la configuración de ECOPETROL FLANGE A3-6F 1/2 - 2 600 1480 250 A105 0,125 FLG x PE - LONG WELDNECK INCLUIR 36 FLANGE A3A2 3 24 600 RF 80 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 1480 100 A105 0,125 A3-6F 2 - 24 600 1480 250 A105 0,125 FLG x BW - WELDNECK FLANGE 37 BLIND FLANGE A3A2 1/2 24 600 RF CARBON STEEL, BLIND FLANGE, ASTM A- 105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 1480 100 A105 0,125 A3-6F 1/2 - 24 600# 1480 250 A105 0,125 BLIND FLANGE A3-6F 1/2 - 2 600# 1480 250 A105 0,125 FLG x FTH - PROVIDED WITH 38 ORIFICE FLANGE A3A2 1 2 600 RF 160 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 1480 100 A105 0,125 A3-6F 39 ORIFICE FLANGE A3A2 3 24 600 RF 80 CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. 1480 100 A105 0,125 A3-6F CARBON STEEL, BLIND PLATE, ASTM A- A516 GR NO EXISTE EN FLG x BW - COUPLE ORIF. WN - FLG 1/2" TH-TAP A105 0,1252 - 24 600# 1480 250 40 BLIND PLATE A3A2 14 24 600 RF CARBON STEEL, BLIND PLATE, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 1480 100 A516 GR 70 0,125 A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE 41 SPACER RING A3A2 14 24 600 RF CARBON STEEL, SPACER RING, ASTM A- 516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 1480 100 A516 GR 70 0,125 A3-6F 1480 250 0,125 NO EXISTE EN ESTA CLASE 42 FIGURE 8 A3A2 1/2 12 600 RF CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 1480 100 A516 GR 70 0,125 A3-6F 1/2 - 24 600 1480 250 A516 GR. 70 0,125 SPECTACLE BLIND F8S 43 DRIP RINGS A3A2 2 24 600 RF CARBON STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 1480 100 A516 GR 70 0,125 A3-6F 1480 250 0,125 44 GASKET A3A2 1/2 24 600 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND STAINLESS STEEL EXTERNAL CENTERING RING, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 1480 100 SS 304 0,125 A3-6F 1/2 - 24 600 1480 250 SS 304 0,125 SPIRAL WOUND GASKET NO EXISTE EN ESTA CLASE ECP-VST-G-GEN-FT-001 529/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRESS TEMP MAT CA TRIM POR T SEATS GASK ET BALL/ PLUG WED GE OPE RAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GAS KET BALL/PL UG WEDG E OPER AT TAG VALV E NOTES ANÁLISIS ECOPETROL REFINERÍA PIPING CLASS AA3A33-01 GERENCIA TÉCNICA Y DE DESARROLLO E&P SUPERINTENDENCIA DE INGENIERÍA CÓDIGO CNE CÓDIGO GENOMA VERSIÓN AA3A33-01 B UNION A3-6F 1/2 - 1 1/2 6000# 1480 250 A105 0,125 SW INCLUIR STRAINER "Y" TYPE A3-6F 1/2 - 2 600# 1480 250 A105 0,125 FLG - AISI 316 SCREEN - 1/2" FTHD DRAIN WITH INCLUIR STREAM TRAPS A3-6F 1/2 - 3/4 800# 1480 250 A105 0,125 SW - THERMODYNAMIC INCLUIR 45 BOLTING A3A2 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 1480 100 A193 GR B7 0,125 A3-6F 1480 250 Stud A193/B7 - Nuts A194/2H 0,125 NOTES: AMARILLO GRIS OSCUPO GRIS CLARO BLANCO ITEMS QUE NO EXISTEN EN CLASES CONTRATO MAR ITEMS QUE HAY DIFERENCIA CON RELACION A CLASE ITEMS QUE SON IGUALES ITEMS NUEVOS EN CLASES CONTRATO MARCO ECP-VST-G-GEN-FT-001 530/761 Elaborado 25/03/11 CLASS 900 MATERIAL: REVISION: Versión1 DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 1962 ASTM A106 GR. B DATE: 14-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 210 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 2220 ASOCIATED GAS ASG 20% X-RAY 200 2035 METHANOL MET 300 1965 SALES GAS SG 400 1900 500 1810 600 1705 650 1650 700 1590 750 1520 800 1235 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 RJ ANSI RATING API 5L GR. X65 PSL 2 ONLY FOR PIPE 26" TO 36" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / MSS SP-75 WPHY 65 / ASTM A694 F65 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AA4B33-01 FLANGE FINISH ECP-VST-G-GEN-FT-001 531/761 Elaborado 25/03/11 CLASS 900 MATERIAL: REVISION: Versión1 DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 1962 ASTM A106 GR. B DATE: 14-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 210 RJ ANSI RATING API 5L GR. X65 PSL 2 ONLY FOR PIPE 26" TO 36" / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A-105 / MSS SP-75 WPHY 65 / ASTM A694 F65 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AA4B33-01 FLANGE FINISH ECP-VST-G-GEN-FT-001 532/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AA4B33-01 1/2 1+1/2 1500# SW GA06B0B2 2 GATE VALVE AA4B33-01 2 2 1500# RJ GA06B0B1 3 GATE VALVE AA4B33-01 3 4 900# RJ GA05B0B1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB,BODY/BONNET: ASTM A105, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: SOLID, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TEST; ACCORDING TO API 602, REDUCED BORE CARBON STEEL, GATE VALVE LP, FB, BODY/BONNET: ASTM A216 GR. WCB, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TEST; ACCORDING TO API 600 CARBON STEEL, GATE VALVE LP, FB, BODY/BONNET: ASTM A216 GR. WCB, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 3 GATE VALVE AA4B33 01 3 4 900# RJ GA05B0B1 4 GATE VALVE AA4B33-01 6 24 900# RJ GA05B0B1 5 GATE VALVE AA4B33-01 6 20 900# RJ GA05B0B3 6 GATE VALVE AA4B33-01 24 24 900# RJ GA05B0B3 7 GLOBE VALVE AA4B33-01 1/2 1 1/2 1500# SW GL06F0B2 , , , ( 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TEST; ACCORDING TO API 600 CARBON STEEL, GATE VALVE LP, FB, BODY/BONNET: ASTM A216 GR. WCB, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TEST; ACCORDING TO API 600 CARBON STELL, CONDUIT GATE VALVE, BODY/BONNET: ASTM A216 GR. WCB, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF(TUNGSTEN CARBIDE)GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR; ACCORDING TO API 6D CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A105, ALL APPLICABLE POINTS AS FOR API 602, SOCKET WELDING FACE ENDS,BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON DISC: SWIVEL PLUG TYPE SEAT: RENEWABLE CARBON STELL, CONDUIT GATE VALVE, BODY/BONNET: ASTM A216 GR. WCB, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF(TUNGSTEN CARBIDE)GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR; ACCORDING TO API 6D 8 GLOBE VALVE AA4B33-01 2 2 1500# RJ GL06B0B2 9 GLOBE VALVE AA4B33-01 3 3 900 LB RJ GL05B0B2 10 GLOBE VALVE AA4B33-01 4 16 900 LB RJ GL05B0B2 11 CHECK VALVE AA4B33-01 3 24 900# RJ CK05B0B1 GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COEFFICIENT PA CARBON STEEL, GLOBE VALVE LP, BODY/BONNET: ASTM A216 GR. WCB, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL; ACCORDING TO BS 1873 CARBON STEEL, GLOBE VALVE LP, BODY/BONNET: ASTM A216 GR. WCB, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL; ACCORDING TO BS 1873 CARBON STEEL, GLOBE VALVE LP, BODY/BONNET: ASTM A216 GR. WCB, BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR; ACCORDING TO BS 1873 CARBON STEEL, CHECK VALVE SWING, BODY/CAP: BOLTED, ASTM A216 GR. WCB BODY, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, ACCORDING TO API 6D ECP-VST-G-GEN-FT-001 533/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 12 BALL VALVE AA4B33-01 3 20 900# RJ BA05B0I1J 13 BALL VALVE AA4B33-01 24 24 900# RJ BA05B0I1J 14 PIPE AA4B33-01 1/2 1 1/2 PE 160 T-01 CARBON STEEL, BALL VALVE LP FB, BODY: 2 - 3 PIECES - SPLIT BODY, ASTM A216 GR. WCB BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TEST, ACCORDING TO API 6D CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, BALL VALVE LP FB, BODY: 2 - 3 PIECES - SPLIT BODY, ASTM A216 GR. WCB BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TEST, OTHER REQUIREMENTS: HAND WHEEL OPERATOR, ACCORDING TO API 6D 15 PIPE AA4B33-01 2 3 BE 160 T-01 16 PIPE AA4B33-01 4 10 BE 120 T-01 17 PIPE AA4B33-01 12 24 BE 100 T-01 18 PIPE AA4B33-01 26 26 BE 1,137 MWT T-04 19 PIPE AA4B33-01 28 28 BE 1,215 MWT T-04 20 PIPE AA4B33-01 30 30 BE 1,293 MWT T-04 21 PIPE AA4B33-01 36 36 BE 1,526 MWT T-04 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >=2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 22 NIPPLE AA4B33-01 1 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 23 NIPPLE AA4B33-01 1 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 24 ELBOW 45 DEGREES AA4B33-01 1/2 1+1/2 6000# SW A-01 25 ELBOW 90 DEGREES AA4B33-01 1/2 1+1/2 6000# SW A-01 26 ELBOW 45 DEGREES AA4B33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 27 ELBOW 45 DEGREES AA4B33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-03 28 ELBOW 90 DEGREES AA4B33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, L = 100 mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, L =200 mm CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 ELBOW 90 DEGREES AA4B33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-03 4 24 1/2 1 1/2 26 36 1/2 1 1/2 6 24 2 12 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A105, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 A-03 30 OLET AA4B33-01 6000# BW x SW ACCORDING TO PIPE SCHEDULE CARBON STEEL, SOCKOLET, ASTM A105, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 BW x BW ACCORDING TO PIPE SCHEDULE A-01 31 OLET AA4B33-01 6000# BW x SW ACCORDING TO PIPE SCHEDULE CARBON STEEL, SOCKOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP-97, BEVELED END AS PER ASME B16.25, SOCKETWELD END AS PER ASME B16.11 A-0132 OLET AA4B33-01 ECP-VST-G-GEN-FT-001 534/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 26 36 12 16 34 STRAIGHT TEE AA4B33-01 1/2 1+1/2 6000# SW A-01 3/4 1 1/2 1/2 1 1/2 36 STRAIGHT TEE AA4B33-01 2 24 BW x BW ACCORDING TO PIPE SCHEDULE A-02 37 STRAIGHT TEE AA4B33-01 26 36 BW x BW ACCORDING TO PIPE SCHEDULE A-03 BW x BWAA4B33-01 AA4B33-01 A-03 35 6000 A-01SW x SW CARBON STEEL, STRAIGHT AND REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP-97, BEVELED ENDS AS PER ASME B16.25OLET33 REDUCER TEE CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 3 24 2 22 26 36 24 30 40 COUPLING AA4B33-01 1/2 1+1/2 6000# SW A-01 2 4 1/2 1 1/2 3/4 1 1/2 1/2 1 3 24 2 22 26 36 24 30 3 4 2 3 AA4B33-01 ACCORDING TO PIPE SCHEDULE CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 41 CONCENTRIC REDUCER 39 REDUCER TEE 42 AA4B33-01 ECCENTRIC REDUCER 44 CONCENTRIC REDUCER 45 AA4B33-01 AA4B33-01 CONCENTRIC REDUCER A-03 A-02 A-02BW x MTH ACCORDING TO PIPE SCHEDULE AA4B33-01 BW x BW ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE PEx PE ACCORDING TO PIPE SCHEDULE BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL CONCENTRIC SWAGE ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS CARBON STEEL CONCENTRIC REDUCING NIPPLE SEAMLESS ASTM A 234 GR. WPB, AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, FEMALE THREADED END AS PER ASME B1.20.1, NPT CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 43 CONCENTRIC REDUCER AA4B33-01 BW x BW BW x BW CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC SWAGE REDUCER, SEAMLESS, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, BEVELED ENDS AS PER ASME B16.25 A-02 A-03 A-02 A-0238 REDUCER TEE AA4B33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 2 3 3 24 2 22 26 36 24 30 48 UNION AA4B33-01 1/2 1+1/2 6000# SW 49 CAP AA4B33-01 1/2 1 1/2 6000# SW ACCORDING TO PIPE SCHEDULE A-01 50 CAP AA4B33-01 2 24 BW ACCORDING TO PIPE SCHEDULE A-02 51 CAP AA4B33-01 26 36 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKET WELDING ENDS AS PER ASME B16.11 46 ECCENTRIC REDUCER AA4B33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-02 47 ECCENTRIC REDUCER AA4B33-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-03 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 535/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 52 FLANGE AA4B33-01 1/2 1 1/2 1500# RJ ACCORDING TO PIPE SCHEDULE B-01 53 FLANGE AA4B33-01 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE B-02 54 FLANGE AA4B33-01 3 24 900# RJ ACCORDING TO PIPE SCHEDULE B-02 55 FLANGE AA4B33-01 26 36 900# RJ ACCORDING TO PIPE SCHEDULE B-04 56 BLIND FLANGE AA4B33 01 1/2 2 1500# RJ B 03 CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.47 SERIE B, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, SOCKET WELD FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END 56 BLIND FLANGE AA4B33-01 1/2 2 1500# RJ B-03 57 BLIND FLANGE AA4B33-01 3 24 900# RJ B-03 58 BLIND FLANGE AA4B33-01 26 36 900# RJ B-05 59 ORIFICE FLANGE AA4B33-01 3 24 900# RJ ACCORDING TO PIPE SCHEDULE 60 FIGURE 8 AA4B33-01 1/2 2 1500# RJ 61 FIGURE 8 AA4B33-01 3 12 900# RJ 62 PADDLE BLIND AA4B33-01 12 24 900# RJ RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE (WITH NPT ORIFICE 1/2 TH-TAP), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, AS PER ASME B16.48, FOR INSTALLATION BETWEEN ASME B16.5 FLANGES, RING JOINT FACE FLANGED END, WAFER JOINT TYPE CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, AS PER ASME B16.48, FOR INSTALLATION BETWEEN ASME B16.5 FLANGES, RING JOINT FACE FLANGED END, WAFER JOINT TYPE CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE 63 SPACER RING AA4B33-01 12 24 900# RJ 64 GASKET AA4B33-01 1/2 2 1500# RJ E-03 65 GASKET AA4B33-01 3 36 900# RJ E-03 66 BOLTING AA4B33-01 P-01 OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT FACE ENDS OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT FACE ENDS CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE ECP-VST-G-GEN-FT-001 536/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 API 5L GR. X42 DATE: 09-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 PRODUCED FLUID PFL 200 260 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 RF ANSI RATING ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A694 GR. F42 / MSS SP-75 GR. WPHY42 / ASTM A216 WCB PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AB1A31-02 FLANGE FINISH NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- 20% X-RAY WELDING CONTROL ECP-VST-G-GEN-FT-001 537/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 285 API 5L GR. X42 DATE: 09-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 RF ANSI RATING ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A694 GR. F42 / MSS SP-75 GR. WPHY42 / ASTM A216 WCB PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AB1A31-02 FLANGE FINISH ECP-VST-G-GEN-FT-001 538/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB1A31-02 1/2 1 1/2 800# SW GA04F0B2 2 GATE VALVE AB1A31-02 1/2 1 1/2 800# FTH GA04H0B2 COMPONENTS DESCRIPTION CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16 5 CONSTRUCTION AS PER ASME B16 34 TESTS Versión 1 CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A-105, ACCCORDING TO API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 3 GATE VALVE AB1A31-02 2 10 150# RF GA01A0B1 4 GATE VALVE AB1A31-02 12 24 150# RF GA01A0B1 5 GATE VALVE AB1A31-02 26 42 150# RF GA01A0B1 6 GATE VALVE AB1A31-02 2 24 150# RF GA01A0B3 7 GLOBE VALVE AB1A31-02 1/2 1 1/2 800# SW GL04F0B2 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, ACCORDING TO API 6D FOR FLG ASME B16.47 SERIES B, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEARCARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTENCARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FL CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A-105, ALL APLICABLE POINTS AS FOR API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 8 GLOBE VALVE AB1A31-02 2 6 150# RF GL01A0B2 9 GLOBE VALVE AB1A31-02 8 16 150# RF GL01A0B2 10 CHECK VALVE AB1A31-02 2 36 150# RF CK01A0B1 CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APLICABLE POINTS AS FOR API 600, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APLICABLE POINTS AS FOR BS 1873, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COEFF CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, FB, RB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8) ECP-VST-G-GEN-FT-001 539/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 11 NEEDLE VALVE AB1A31-02 3/4 1 800# SW NE04F0B2 12 BALL VALVE AB1A31-02 1/2 1+1/2 800# PE BA04G0I1J CARBON STEEL, NEEDLE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING, RATING AS PER ASME B16.34, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, TRIM: API TRIM 8, SEATS: RENEWABLE TYPE, DISC: NEEDLE, STEM: O.S. & Y. / RISING STEM RISING OPERATOR, ENDS: AS PER ASME B16.11, OPERATION: HANDWHEEL, PACKING: FLEXIBLE GRAPHITE CARBON STEEL, BALL VLV EXT.FEM.END W/2NIP FB, FLOATING, FULL PORT, ASTM A-105, CONSTRUCTION AS PER ASME B 16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: + 6" NIPPLES WELDED +A106 GR B+SCH160 CARBON STEEL, BALL VALVE LP FULL PORT, ASTM A216 GR. WCB, 13 BALL VALVE AB1A31-02 2 6 150# RF BA01A0I1J 14 BALL VALVE AB1A31-02 8 20 150# RF BA01A0I1J 15 PIPE AB1A31-02 1/2 3/4 PE 160 T-01 16 PIPE AB1A31-02 1 1+1/2 PE 80 T-01 17 PIPE AB1A31-02 2 2 BE 80 T-01 18 PIPE AB1A31-02 3 10 BE STD T-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME CARBON STEEL, BALL VALVE LP FULL PORT, ASTM A216 GR. WCB, ACCORDING TO API 608, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: HAND WHEEL OPERATOR CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 19 PIPE AB1A31-02 12 24 BE 20 T-01 20 PIPE AB1A31-02 26 30 BE STD T-01 21 PIPE AB1A31-02 36 36 BE XS T-01 22 PIPE AB1A31-02 42 42 BE XS T-01 23 NIPPLE AB1A31-02 1 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 24 NIPPLE AB1A31-02 1 1/2 1 1/2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 25 NIPPLE AB1A31-02 1 1/2 1 1/2 MTH ACCORDING TO PIPE SCHEDULE T-01 26 NIPPLE AB1A31-02 1 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 27 NIPPLE AB1A31 02 1 1/2 1 1/2 PE MTH ACCORDING TO T 01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 200mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36 10 PLAIN END THREADED END AS PER ASME B1 20 1 NPT L = CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100mm CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, THREADED END AS PER ASME B1.20.1, NPT, L = 100mm CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 27 NIPPLE AB1A31-02 1 1/2 1 1/2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 28 ELBOW 45 DEGREES AB1A31-02 1/2 1+1/2 6000# SW A-01 29 ELBOW 90 DEGREES AB1A31-02 1/2 1+1/2 6000# SW A-01 ASME B36.10, PLAIN END, THREADED END AS PER ASME B1.20.1, NPT L = 200mm CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 540/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 30 ELBOW 45 DEGREES AB1A31-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 31 ELBOW 45 DEGREES AB1A31-02 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 32 ELBOW 90 DEGREES AB1A31-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 33 ELBOW 90 DEGREES AB1A31-02 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 34 45 DEGREE ELBOW R=5D AB1A31-02 4 42 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREE, R = 5D E.R.W, API 5L GR. X42, MANUF.S STD/ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 PIPE SCHEDULE 35 45 DEGREE INDUCTION BEND R=6D AB1A31-02 6 42 BW ACCORDING TO PIPE SCHEDULE A-03 36 90 DEGREE INDUCTION BEND R=6D AB1A31-02 6 42 BW ACCORDING TO PIPE SCHEDULE A-03 4 42 1/2 1 1/2 6 42 2 16 39 STRAIGHT TEE AB1A31-02 1 1+1/2 6000# SW A-01 3/4 1 1/2 1/2 1 1/2 41 STRAIGHT TEE AB1A31-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 ACCORDING TO , B16.25 CARBON STEEL, ELBOW 45 DEGREE INDUCTION BEND R = 6D E.R.W, API 5L GR. X42, MANUF.S STD/ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREE INDUCTION BEND R = 6D E.R.W, API 5L GR. X42, MANUF.S STD/ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL STRAIGHT TEE MSS SP 75 WPHY 42 DIMENSIONS AS PER A-01 A-03 A-03 OLET OLET AB1A31-02 AB1A31-02 AB1A31-02 CARBON STEEL, SOCKOLET, ASTM A694 F42, DIMENSIONS AS PER MSS-SP- 97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A694 F42, DIMENSIONS AS PER MSS-SP- 97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 REDUCER TEE 37 6000# ACCORDING TO PIPE SCHEDULE SW x SW BW x BW ACCORDING TO PIPE SCHEDULEBW x SW 38 40 6000# 42 STRAIGHT TEE AB1A31-02 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 43 STRAIGHT BARRED TEE AB1A31-02 8 36 BW ACCORDING TO PIPE SCHEDULE A-03 2 2 1 1/2 1 1/2 3 42 2 36 4 36 2 30 47 COUPLING AB1A31-02 1/2 1+1/2 6000# SW x FTH A-01 48 COUPLING AB1A31-02 1/2 1+1/2 6000# FTH A-01 49 COUPLING AB1A31-02 1 1+1/2 6000# SW A-01 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 46 A-03 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER MANUF´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-03 ACCORDING TO PIPE SCHEDULE CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER MANUF´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 45 44 BW x BW ACCORDING TO PIPE SCHEDULE REDUCER TEE REDUCER BARRED TEE AB1A31-02 AB1A31-02 AB1A31-02 REDUCER TEE BW x BW BW x BW ECP-VST-G-GEN-FT-001 541/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 50 HALF COUPLING AB1A31-02 1 1 1/2 6000# PE x FTH A-01 51 HALF COUPLING AB1A31-02 1 1 1/2 6000# PE x SW A-01 1/2 2 1/2 1 1/2 2 1/2 3/4 3/4 1+1/2 1/2 1 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, PLAIN END, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL CONCENTRIC SWAGE ASTM A 234 Gr. WPB, AS PER MSS SP- 95, BEVELED END AS PER ASME B16.25, PLAIN END CARBON STEEL CONCENTRIC REDUCING NIPPLE SEAMLESS ASTM A 234 Gr. WPB, AS PER MSS SP-95, PLAIN END, MALE THREADED END AS PER ASME B1 20 1 NPT A-02PE x MTH ACCORDING TO PIPE SCHEDULE 52 CONCENTRIC REDUCER53 54 AB1A31-02 AB1A31-02 ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL CONCENTRIC REDUCING NIPPLE SEAMLESS ASTM A 234 Gr. WPB, AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, MALE THREADED END AS PER ASME B1.20.1, NPT BW x PE CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, PLAIN END, THREADED END AS PER ASME B1.20.1 AB1A31-02 A-02 CONCENTRIC REDUCER BW x MTH CONCENTRIC REDUCER 1/2 1 3/4 1+1/2 1/2 1 2 2 1 1/2 1 1/2 3 42 2 36 2 3 1/2 1+1/2 3/4 1+1/2 1/2 1 3 42 2 36 61 UNION AB1A31-02 1/2 3/4 6000# SW CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL UNION ASTM A105 DIMENSIONS AS PER MSS SP-83 CARBON STEEL CONCENTRIC REDUCING NIPPLE SEAMLESS ASTM A 234 Gr. WPB, AS PER MSS SP-95, PLAIN ENDS CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 60 ECCENTRIC REDUCER BW x BWAB1A31-02 B1.20.1, NPT 57 58 CONCENTRIC REDUCER CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-03 A-02 ECCENTRIC REDUCER 59 ECCENTRIC REDUCER AB1A31-02 AB1A31-02 A-02 A-02 AB1A31-02 A-03 PE x MTH ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE BW x PE CARBON STEEL, ECCENTRIC REDUCING NIPPLE, SEAMLESS, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED END AS PER ASME B1.20.1, NPT, PLAIN END PE x PE ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE A-02 AB1A31-02 ACCORDING TO PIPE SCHEDULE PIPE SCHEDULE BW x BW ACCORDING TO PIPE SCHEDULE 56 CONCENTRIC REDUCER BW x BW AB1A31-0255 CONCENTRIC REDUCER 62 UNION AB1A31-02 1 1+1/2 3000# SW 63 PLUG AB1A31-02 1 1+1/2 MTH 64 CAP AB1A31-02 1/2 1 1/2 6000# FTH A-01 65 CAP AB1A31-02 1/2 1 1/2 6000# SW A-01 66 CAP AB1A31-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 67 CAP AB1A31-02 3 42 BW ACCORDING TO PIEP SCHEDULE A-03 68 FLANGE AB1A31-02 1/2 1 1/2 150# RF ACCORDING TO PIPE SCHEDULE B-01 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKET WELD FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 542/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 69 FLANGE AB1A31-02 1 1/2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 70 FLANGE AB1A31-02 2 2 150# RF ACCORDING TO PIPE SCHEDULE B-02 71 FLANGE AB1A31-02 3 24 150# RF ACCORDING TO PIPE SCHEDULE B-04 72 FLANGE AB1A31-02 26 42 150# RF ACCORDING TO PIPE SCHEDULE B-04 73 BLIND FLANGE AB1A31-02 1/2 2 150# RF B-01 CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, LONG WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS MANUFACTURER´S STD, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16 5 RAISED FACE FLANGED END73 BLIND FLANGE AB1A31 02 1/2 2 150# RF B 01 74 BLIND FLANGE AB1A31-02 3 24 150# RF B-05 75 BLIND FLANGE AB1A31-02 26 42 150# RF B-05 76 ORIFICE FLANGE AB1A31-02 2 2 300# RF ACCORDING TO PIPE SCHEDULE 77 ORIFICE FLANGE AB1A31-02 3 24 300# RF ACCORDING TO PIPE SCHEDULE 78 PADDLE BLIND AB1A31-02 14 30 300# RF 79 SPACER RING AB1A31-02 14 30 300# RF 80 FIGURE 8 AB1A31-02 1/2 12 150# RF CARBON STEEL, BLIND FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END B16.5, RAISED FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE (WITH NPT ORIFICE 1/2 TH-TAP), ASTM A-105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A-105. CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE (WITH NPT ORIFICE 1/2 TH-TAP), ASTM A694 F42, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A694 F42. CARBON STEEL, PADDLE BLIND ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, AS PER ASME B16.48, FOR INSTALLATION BETWEEN ASME B16.5 FLANGES, RAISED FACE ENDS 81 GASKET AB1A31-02 1/2 42 150# RF E-01 82 GASKET AB1A31-02 1/2 42 300# RF E-01 83 INSULATION KIT AB1A31-02 1 42 150# STD FINISH E-04 84 BOLTING AB1A31-02 P-01 INSULATION KIT, DIMENSIONS AS PER MANUFACTURER'S STD, GASKET TYPE F WITH SEALS, INSULATING WASHERS, STEEL WASHERS AND INSULATING SLEEVES, ACCORDING TO MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 FOR INSTALLATION BETWEEN ASME B16.5 FLANGES, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5, B16.47, ACCORDING TO ASME B16.20 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5, B16.47, ACCORDING TO ASME B16.20 ECP-VST-G-GEN-FT-001 543/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 270 API 5L GR. X42 DATE: 09-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 PRODUCED WATER PWA 200 260 TREATED WATER TWA 300 230 OIL AND WATER MIXTURE CRW 400 200 MUD LOD 500 170 600 140 650 125 700 110 750 95 800 80 NOTES: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB1A32-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 544/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 270 API 5L GR. X42 DATE: 09-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB1A32-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 ECP-VST-G-GEN-FT-001 545/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB1A32-01 1/2 1 1/2 800# SW GA04F0B2 2 GATE VALVE AB1A32-01 1/2 1 1/2 800# FTH GA04H0B2 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A-105, ACCCORDING TO API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. 3 GATE VALVE AB1A32-01 3 12 150# RF GA01A0B1 4 GATE VALVE AB1A32-01 12 24 150# RF GA01A0B1 5 GATE VALVE AB1A32-01 26 42 150# RF GA01A0B1 6 GATE VALVE AB1A32-01 2 24 150# RF GA01A0B3 CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, ACCORDING TO API 6D FOR FLG ASME B16.47 SERIES B, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, 7 CHECK VALVE AB1A32-01 2 20 150# RF CK01A0B1 8 GLOBE VALVE AB1A32-01 1/2 1 1/2 800# SW GL04F0B2 , , 13%CR+HF(TUNGSTENCARBIDE)GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FL CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, FB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8) CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A-105, ALL APLICABLE POINTS AS FOR API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL ECP-VST-G-GEN-FT-001 546/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 9 GLOBE VALVE AB1A32-01 2 6 150# RF GL01A0B2 10 GLOBE VALVE AB1A32-01 8 16 150# RF GL01A0B2 CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APLICABLE POINTS AS FOR API 600, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APLICABLE POINTS AS FOR BS 1873, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COEFF 11 BALL VALVE AB1A32-01 1/2 1 1/2 800# PE BA04G0I1J 12 BALL VALVE AB1A32-01 2 6 150# RF BA01A0I1J 13 BALL VALVE AB1A32-01 8 20 150# RF BA01A0I1J 14 NEEDLE VALVE AB1A32-01 3/4 1 800# SW NE04F0B2 CARBON STEEL, BALL VALVE LP, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B 16.34/API 608. BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TESTS. CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A- 216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, NEEDLE VALVE, ASTM A-105, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING, RATING AS PER ASME B16.34, CONSTRUCTION AS PER ASME B 16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, TRIM: API TRIM 8, SEATS: RENEWABLE TYPE, DISC: NEEDLE, STEM: O.S. & Y. / RISING STEM RISING OPERATOR ENDS AS PER ASME B16 11 OPERATION HANDWHEEL PACKING CARBON STEEL, BALL VLV EXT.FEM.END W/2NIP FB, FLOATING, FULL PORT, ASTM A-105, CONSTRUCTION AS PER ASME B 16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: + 6" NIPPLES WELDED +A106 GR B+SCH160 15 PIPE AB1A32-01 1/2 3/4 PE 160 T-01 16 PIPE AB1A32-01 1 1 1/2 PE 80 T-01 17 PIPE AB1A32-01 2 2 BE 80 T-01 18 PIPE AB1A32-01 3 6 BE STD T-01 19 PIPE AB1A32-01 8 10 BE 20 T-01 20 PIPE AB1A32-01 12 14 BE 30 T-01 21 PIPE AB1A32-01 16 24 BE 20 T-01 22 PIPE AB1A32-01 26 26 BE 10 T-01 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL D S A W PIPE API 5L GR X42 DIMENSIONS AS PER ASME B36 10 OPERATOR, ENDS: AS PER ASME B16.11, OPERATION: HANDWHEEL, PACKING: FLEXIBLE GRAPHITE CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 23 PIPE AB1A32-01 28 30 BE STD T-01 CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 547/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 24 PIPE AB1A32-01 36 36 BE STD T-01 25 PIPE AB1A32-01 42 42 BE XS T-01 26 ELBOW 45 DEGREES AB1A32-01 1/2 1 1/2 6000# SW A-01 27 ELBOW 45 DEGREES AB1A32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 28 ELBOW 45 DEGREES AB1A32-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 29 ELBOW 90 DEGREES AB1A32-01 1/2 1 1/2 6000# SW A-01 30 ELBOW 90 DEGREES AB1A32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 31 ELBOW 90 DEGREES AB1A32-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 32 45 DEGREE INDUCTION BEND R = 6D AB1A32-01 6 20 BW ACCORDING TO PIPE SCHEDULE A-03 2 3 1/2 1 1/2 1/2 2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END AS PER ASME B36.10, THREADED END AS PER ASME B1.20.1 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREE INDUCTION BEND R = 6D E.R.W, API 5L GR. X42, MANUF.S STD/ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, BEVELED ENS AS PER ASME B16.25, THREADED END AS PER ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 XXS A-02 33 CONCENTRIC REDUCER AB1A32-01 BW x PE ACCORDING TO PIPE SCHEDULE AB1A32-01 PE x PE 160 A-02 34 CONCENTRIC REDUCER AB1A32-01 BW x MTH A-02 36 CONCENTRIC REDUCER AB1A32-01 PE x MTH XXS A-02 35 CONCENTRIC REDUCER 2 2 1 1/2 1 1/2 3 42 2 36 2 3 1/2 1 1/2 3/4 1 1/2 1/2 1 3 42 2 36 42 CAP AB1A32-01 1/2 1 1/2 6000# FTH A-01 43 CAP AB1A32-01 1/2 1 1/2 6000# SW A-01 44 CAP AB1A32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END AS PER ASME B36.10, THREADED END AS PER ASME B1.20.1 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ACCORDING TO PIPE SCHEDULE A-03 37 CONCENTRIC REDUCER AB1A32-01 BW x BW ACCORDING TO PIPE SCHEDULE AB1A32-01 BW x PE ACCORDING TO PIPE SCHEDULE A-02 38 CONCENTRIC REDUCER AB1A32-01 BW x BW A-02 40 ECCENTRIC REDUCER AB1A32-01 PE x MTH XXS A-02 39 ECCENTRIC REDUCER 41 ECCENTRIC REDUCER AB1A32-01 BW x BW ACCORDING TO PIPE SCHEDULE A-03 ECP-VST-G-GEN-FT-001 548/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 45 CAP AB1A32-01 3 42 BW ACCORDING TO PIEP SCHEDULE A-03 46 STRAIGHT TEE AB1A32-01 1/2 1 1/2 6000# SW A-01 3/4 1 1/2 1/2 1 1/2 48 STRAIGHT TEE AB1A32-01 2 2 BW ACCORDING TO PIEP SCHEDULE A-02 2 2 1 1/2 1 1/2 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 AB1A32-01 47 REDUCER TEE AB1A32-01 6000# SW x SW A-01 49 REDUCER TEE BW x BW ACCORDING TO PIEP SCHEDULE A-02 50 STRAIGHT TEE AB1A32-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 3 42 2 36 2 42 1/2 1 1/2 6 42 2 16 54 PLUG AB1A32-01 1/2 1 1/2 MTH ACCORDING TO PIPE SCHEDULE 55 COUPLING AB1A32-01 1/2 1 1/2 6000# FTH A-01 56 COUPLING AB1A32-01 1/2 1 1/2 6000# SW x FTH A-01 57 COUPLING AB1A32-01 1 1 1/2 6000# SW A-01 58 HALF COUPLING AB1A32 01 1/2 1 1/2 6000# PE FTH A 01 CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED END AS PER ASME B16.25, SOCKET WELDING END AS PER ASME B16.11 CARBON STEEL, WELDOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 52 OLET AB1A32-01 6000# BW x SW A-03 53 OLET AB1A32-01 BW x BW ACCORDING TO PIPE SCHEDULE A-03 A-0351 REDUCER TEE AB1A32-01 BW x BW ACCORDING TO PIPE SCHEDULE 58 HALF COUPLING AB1A32-01 1/2 1 1/2 6000# PE x FTH A-01 59 HALF COUPLING AB1A32-01 1/2 1 1/2 6000# PE x SW A-01 60 NIPPLE AB1A32-01 1/2 1 1/2 MTH XXS T-01 61 NIPPLE AB1A32-01 1/2 1 1/2 PE x MTH XXS T-01 62 NIPPLE AB1A32-01 1/2 1 1/2 PE 160 T-01 63 FLANGE AB1A32-01 1/2 1 1/2 150# RF ACCORDING TO PIPE SCHEDULE B-01 64 FLANGE AB1A32-01 2 2 150# RF ACCORDING TO PIPE SCHEDULE B-02 65 FLANGE AB1A32-01 3 24 150# RF ACCORDING TO PIPE SCHEDULE B-04 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, FOR L =100 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, THREADED END AS PER ASME B1.20.1, NPT, FOR L = 100 & 200 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, FOR L = 100 & 200 mm CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, HALF COUPLING, ASTM A 105, DIMENSIONS AS PER ASME B16.11, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, PLAIN END, SOCKET WELDING END AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 549/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 66 FLANGE AB1A32-01 4 24 300# RF ACCORDING TO PIPE SCHEDULE B-04 67 FLANGE AB1A32-01 26 42 150# RF ACCORDING TO PIPE SCHEDULE B-04 68 FLANGE AB1A32-01 6 6 150# BW x BW ACCORDING TO PIPE SCHEDULE 69 FLANGE AB1A32-01 16 20 150# BW x BW ACCORDING TO PIPE SCHEDULE 70 BLIND FLANGE AB1A32-01 1/2 2 150# RF B-03 CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A 694 F42, SPECIAL DESIGN; CALCULATED FOR TO RESIST 55 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A 694 F42, SPECIAL DESIGN; CALCULATED FOR TO RESIST 230 TONS OF THRUST FORCE CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 71 BLIND FLANGE AB1A32-01 3 24 300# RF B-05 72 BLIND FLANGE AB1A32-01 4 24 150# RF B-05 73 BLIND FLANGE AB1A32-01 26 42 150# RF B-05 74 PADDLE BLIND AB1A32-01 14 30 150# RF 75 SPACER RING AB1A32-01 14 30 150# RF 76 FIGURE 8 AB1A32-01 1/2 12 150# RF 77 GASKET AB1A32-01 1/2 42 150# RF E-01 78 GASKET AB1A32-01 1/2 42 300# RF E-01 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5; OUTER RING CARBON STEEL UNION ASTM A105 DIMENSIONS AS PER MANUFACTURER´S STD CARBON STEEL, BLIND FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISE FACE ENDS; WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS; WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5; OUTER RING RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 79 UNION AB1A32-01 1/2 1 1/2 6000# SW x FTH 80 ORIFICE FLANGE AB1A32-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE 81 ORIFICE FLANGE AB1A32-01 3 20 300# RF ACCORDING TO PIPE SCHEDULE 82 INSULATION KIT AB1A32-01 1 20 150# STD FINISH E-04 83 BOLTING AB1A32-01 P-01 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.11 ALL POINTS APPLICABLE, SOCKET WELD END AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1 CARBON STEEL, COUPLE ORIFICE FLANGE, ASTM A 105, DIMENSIONS AS PER ASME B16,36, WN-FLG 1/2" TH-TAP, FLG x BW CARBON STEEL, COUPLE ORIFICE FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16,36, WN-FLG 1/2" TH-TAP, FLG x BW INSULATION KIT, GASKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 550/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 270 API 5L GR. X42 DATE: 10-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 RAW WATER RAW 200 260 TREATED WATER TWA 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 FLANGE FINISH 1/4" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB1A52-01 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- NO DESTRUCTIVE EXAMINATION 20 % X-RAY 3.- POST WELDING HEAT TREATMENT FOR THICKNESS > 19 mm ECP-VST-G-GEN-FT-001 551/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 270 API 5L GR. X42 DATE: 10-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 FLANGE FINISH 1/4" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB1A52-01 ECP-VST-G-GEN-FT-001 552/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB1A52-01 3/4 1 1/2 800# SW GA04F0B2 CARBON STEEL, GATE VALVE, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, COMPONENTS DESCRIPTION 2 GATE VALVE AB1A52-01 2 10 150# RF GA01A0B1 3 GATE VALVE AB1A52-01 12 24 150# RF GA01A0B1 4 GATE VALVE AB1A52-01 26 42 150# RF GA01A0B1 5 GLOBE VALVE AB1A52-01 3/4 1 1/2 800# SW GL04F0B2 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A-105, ALL APLICABLE POINTS AS FOR API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, ACCORDING TO API 6D FOR FLG ASME B16.47 SERIES B, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, 6 GLOBE VALVE AB1A52-01 2 6 150# RF GL01A0B2 7 GLOBE VALVE AB1A52-01 8 16 150# RF GL01A0B2 8 CHECK VALVE AB1A52-01 3/4 36 150# RF CK01A0B1 TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, FLG 150 LB, RF, RB, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, ALL APPLICABLE POINTS AS FOR API 602/BS 1873. CARBON STEEL, GLOBE VALVE LP ASTM A216 GR. WCB, FLG 150 LB, RF, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, ALL APPLICABLE POINTS AS FOR BS 1873. CHECK VALVE SWING, ASTM A216 GR. WCB, FLG 150 LB, RF, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: API 602 + 6MM CORROSION ALLOWANCE. ALL APPLICABLE POINTS API 602/API 6D ECP-VST-G-GEN-FT-001 553/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 9 PIPE AB1A52-01 1/2 1 1/2 PE XXS T-01 10 PIPE AB1A52-01 2 2 BE 160 T-01 11 PIPE AB1A52-01 3 3 BE 160 T-01 12 PIPE AB1A52 01 4 6 BE XS T 01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 12 PIPE AB1A52-01 4 6 BE XS T-01 13 PIPE AB1A52-01 8 8 BE 60 T-01 14 PIPE AB1A52-01 10 20 BE 40 T-01 15 PIPE AB1A52-01 22 24 BE 30 T-01 16 PIPE AB1A52-01 26 30 BE 20 T-01 17 PIPE AB1A52-01 36 36 BE 30 T-01 18 PIPE AB1A52-01 42 42 BE API 0,625 T-01 19 ELBOW 45 DEGREES AB1A52 01 3/4 1 1/2 6000# SW A 01 CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 19 ELBOW 45 DEGREES AB1A52-01 3/4 1 1/2 6000# SW A-01 20 ELBOW 45 DEGREES AB1A52-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 21 ELBOW 45 DEGREES AB1A52-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 22 ELBOW 90 DEGREES AB1A52-01 1/2 1 1/2 6000# SW A-01 23 ELBOW 90 DEGREES AB1A52-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 24 ELBOW 90 DEGREES AB1A52-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 2 42 CARBON STEEL SOCKOLET ASTM A 694 F42 DIMENSIONS AS PER MSS SP 97 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, ASTM A 105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 2 42 1/2 1 1/2 6 42 2 16 26 CARBON STEEL, SOCKOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED END AS PER ASME B16.25, SOCKET WELDING END AS PER ASME B16.11 A-0325 OLET AB1A52-01 6000# BW x SW CARBON STEEL, WELDOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25AB1A52-01 ACCORDING TO PIPE SCHEDULEOLET BW x BW A-03 ECP-VST-G-GEN-FT-001 554/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 27 STRAIGHT TEE AB1A52-01 3/4 1 1/2 6000# SW A-01 28 STRAIGHT TEE AB1A52-01 2 2 BW ACCORDING TO PIEP SCHEDULE A-02 29 STRAIGHT TEE AB1A52-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 3/4 1 1/2 1/2 1 1/2 2 2 1 1/2 1 1/2 3 42 2 36 1 2 3/4 1 1/2 3 42 2 36 3 42 2 36 36 CAP AB1A52-01 1/2 1 1/2 6000# SW A-01 A-0130 REDUCER TEE AB1A52-01 6000# SW x SW CARBON STEEL, REDUCER TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET 33 CONCENTRIC REDUCER 31 32 REDUCER TEE BW x BW REDUCER TEE BW x BW A-03ECCENTRIC REDUCER ACCORDING TO PIPE SCHEDULEAB1A52-0135 AB1A52-01 AB1A52-01 BW X BW AB1A52-01 BW X BW CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 BW X BW 34 AB1A52-01CONCENTRIC REDUCER ACCORDING TO PIPE SCHEDULE A-03 A-02 A-02 ACCORDING TO PIPE SCHEDULE A-03 ACCORDING TO PIPE SCHEDULE ACCORDING TO PIEP SCHEDULE CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 36 CAP AB1A52-01 1/2 1 1/2 6000# SW A-01 37 CAP AB1A52-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 38 CAP AB1A52-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 39 FLANGE AB1A52-01 3/4 1 1/2 150# RF ACCORDING TO PIPE SCHEDULE B-01 40 FLANGE AB1A52-01 2 2 150# RF ACCORDING TO PIPE SCHEDULE B-02 41 FLANGE AB1A52-01 3 24 150# RF ACCORDING TO PIPE SCHEDULE B-04 42 FLANGE AB1A52-01 26 42 150# RF ACCORDING TO PIPE SCHEDULE B-04 CARBON STEEL, CAP, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 WELDING ENDS AS PER ASME B16.11 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 555/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 43 FLANGE AB1A52-01 6 6 150# BW x BW ACCORDING TO PIPE SCHEDULE 44 BLIND FLANGE AB1A52-01 1/2 2 150# RF B-03 45 BLIND FLANGE AB1A52-01 3 24 150# RF B-05 46 BLIND FLANGE AB1A52-01 26 42 150# RF B-05 CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A 694 F42, SPECIAL DESIGN; CALCULATED FOR TO RESIST 55 TONS OF THRUST FORCE 46 BLIND FLANGE AB1A52 01 26 42 150# RF B 05 47 ORIFICE FLANGE AB1A52-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE 48 ORIFICE FLANGE AB1A52-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE 49 PADDLE BLIND AB1A52-01 14 30 150# RF 50 SPACER RING AB1A52-01 14 30 150# RF 51 FIGURE 8 AB1A52-01 1/2 12 150# RF 52 GASKET AB1A52-01 1/2 42 150# RF E-01 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5; OUTER RING CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISE FACE ENDS; WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS; WAFER JOINT TYPE CARBON STEEL, SPECTACLE BLIND F8S, ASTM A516 GRADE 70, WAFER JOINT TYPE, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS SERIE B, RAISED FACE FLANGED END CARBON STEEL, COUPLE ORIFICE FLANGE, ASTM A 694 F42, DIMENSIONS AS PER ASME B16,36, WN-FLG 1/2" TH-TAP, FLG x BW CARBON STEEL, COUPLE ORIFICE FLANGE, ASTM A 105, DIMENSIONS AS PER ASME B16,36, WN-FLG 1/2" TH-TAP, FLG x BW 53 INSULATION KIT AB1A52-01 1 42 150# E-04 54 BOLTING AB1A52-01 P-01 ASME B16.5; OUTER RING INSULATION KIT, GASKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 556/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR. X65 DATE: 05-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 215 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 DILUTED PRODUCED FLUID DPF 200 680 PRODUCED WATER PWA 300 655 400 635 500 605 600 570 650 550 700 530 750 505 800 410 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A694 F65 / ASTM A234 GR. WPB / ASTM MSS SP-75 WPHY 65 / ASTM A216 GR. WCB / ASTM A516 GR. 70 CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES ANSI RATINGAB2A31-01 800 410 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 557/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR. X65 DATE: 05-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 215 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A694 F65 / ASTM A234 GR. WPB / ASTM MSS SP-75 WPHY 65 / ASTM A216 GR. WCB / ASTM A516 GR. 70 CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES ANSI RATINGAB2A31-01 ECP-VST-G-GEN-FT-001 558/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB2A31-01 1/2 1 1/2 800# SW GA04F0B2 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE REDUCER PORT FEMALE ENDS, ASTM A105, CONSTRUCTION AS PER API 602, SOCKET WELDING ENDS AS PER ASME 16.11. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. COMPONENTS DESCRIPTION 2 GATE VALVE AB2A31-01 1/2 1 1/2 800# FTH GA04H0B2 3 GATE VALVE AB2A31-01 2 10 300# FLG GA02A0B1 CARBON STEEL, GATE VALVE LONG PATTERN, ASTM A216 GR. WCB, CONSTRUCTION AS PER API 600, FB, RAISED FACE FLANGED ENDS. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE LONG PATTERN, ASTM A216 GR. CARBON STEEL, GATE VALVE REDUCER PORT FEMALE ENDS, ASTM A105, CONSTRUCTION AS PER API 602, FEMALE THREADED ENDS. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. 4 GATE VALVE AB2A31-01 12 30 300# FLG GA02A0B1 5 GATE VALVE AB2A31-01 2 6 300# FLG GA02A0B3 , , WCB, CONSTRUCTION AS PER API 600, FB, RAISED FACE FLANGED ENDS. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, CONDUIT GATE VALVE , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF(TUNGSTENCARBIDE)GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE CARBON STEEL, CONDUIT GATE VALVE , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H GASKET: SPIRAL/W AISI 316L-GRAPHITE 6 GATE VALVE AB2A31-01 6 8 300# FLG GA02A0B3 A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 316L-GRAPHITE FILLER, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF(TUNGSTENCARBIDE)GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE ECP-VST-G-GEN-FT-001 559/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 7 GATE VALVE AB2A31-01 8 24 300# FLG GA02A0B3 CARBON STEEL, CONDUIT GATE VALVE , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRPAHITE, OPERATION: GEAR 8 GATE VALVE AB2A31-01 26 36 300# FLG GA02A0B3 9 GLOBE VALVE AB2A31-01 1/2 1 1/2 800# SW GL04F0B2 CARBON STEEL, GLOBE VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 602/BS 1873, RAISED FACE FLANGED ENDS AS PER ASME 16 5 BODY/BONNET: BOLTED STUD CARBON STEEL, CONDUIT GATE VALVE , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.47. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRPAHITE, OPERATION: GEAR CARBON STEEL, GLOBE VALVE REDUCER PORT FEMALE ENDS , ASTM A105, CONSTRUCTION AS PER API 602, SOCKET WELDING ENDS AS PER ASME 16.11. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL , 10 GLOBE VALVE AB2A31-01 2 6 300# FLG GL02A0B2 11 GLOBE VALVE AB2A31-01 8 20 300# FLG GL02A0B2 FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 600, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR ECP-VST-G-GEN-FT-001 560/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 12 CHECK VALVE AB2A31-01 2 24 300# FLG CK02A0B1 CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 602/API 6D, FB, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: API 6D/ API 602. 13 CHECK VALVE AB2A31-01 26 36 300# FLG CK02A0B1 14 NEEDLE VALVE AB2A31-01 3/4 1 800# SW NE04F0B2 CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 602/API 6D, FB, RAISED FACE FLANGED ENDS AS PER ASME 16.47. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: API 6D/ API 602. CARBON STEEL, BALL VALVE FEMALE ENDS , ASTM A105, CONSTRUCTION AS PER ASME 16 34 6" NIPPLES WELDED +A106 CARBON STEEL, NEEDLE VALVE, ASTM A105, CONSTRUCTION AS PER ASME B16.34, SOCKET WELDING ENDS. BODY/BONNET: BOLTED, TRIM: API TRIM 8, SEATS: RENEWABLE TYPE, DISC: NEEDLE, STEM: O.S. & Y. / RISING STEM RISING OPERATOR, ENDS: AS PER ASME B16.11, OPERATION: T- BAR, PACKING: FLEXIBLE GRAPHITE. 15 BALL VALVE AB2A31-01 1/2 1 1/2 800# PE BA04G0I1J 16 BALL VALVE AB2A31-01 2 4 300# FLG BA02A0B1 CONSTRUCTION AS PER ASME 16.34, 6" NIPPLES WELDED +A106 GR B+SCH160, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: FLOATING TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TESTS. CARBON STEEL, BALL VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER ASME 16.34/API 608, RAISED FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TESTS. ECP-VST-G-GEN-FT-001 561/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 17 BALL VALVE AB2A31-01 6 36 300# FLG BA02A0I2JH CARBON STEEL, BALL VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER ASME 16.34/API 6D, RAISED FACE FLANGED ENDS. BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, DBB, OPERATION: GEAR, COMMENT: API 598 TESTS. 18 BALL VALVE AB2A31-01 2 8 300# FLG BA02A0I2J 19 BALL VALVE AB2A31-01 6 36 300# FLG BA02A0I1J 20 PIPE AB2A31 01 1/2 3/4 PE 160 T 01 CARBON STEEL, BALL VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 608, RAISED FACE FLANGED ENDS. BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, DPE ON ONE SEAT, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS CARBON STEEL, BALL VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D/API 608, RAISED FACE FLANGED ENDS. BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS 20 PIPE AB2A31-01 1/2 3/4 PE 160 T-01 21 PIPE AB2A31-01 1 1 1/2 PE 80 T-01 22 PIPE AB2A31-01 2 2 BE 80 T-01 23 PIPE AB2A31-01 3 6 BE STD T-01 24 PIPE AB2A31-01 8 8 BE 20 T-02 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. AS PER ASME B36.10, PLAIN ENDS. 25 PIPE AB2A31-01 10 12 BE 30 T-02 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. ECP-VST-G-GEN-FT-001 562/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 26 PIPE AB2A31-01 14 16 BE 20 T-02 27 PIPE AB2A31-01 18 22 BE STD T-02 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. 28 PIPE AB2A31-01 24 24 BE XS T-02 29 PIPE AB2A31-01 26 30 BE 20 T-02 30 PIPE AB2A31-01 36 36 BE 30 T-02 31 PIPE AB2A31-01 42 42 BE API 0,625 T-02 32 NIPPLE AB2A31-01 1/2 1 1/2 PE T-01 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11. CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36 10 PLAIN END FOR L 10032 NIPPLE AB2A31 01 1/2 1 1/2 PE T 01 33 NIPPLE AB2A31-01 1/2 2 PE x MTH T-01 34 NIPPLE AB2A31-01 1/2 1 1/2 MTH T-01 DIMENSIONS AS PER ASME B36.10, PLAIN END , FOR L = 100 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END OR THREADED END AS PER ASME B1.20.1, NPT, FOR L = 100. CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, FOR L = 100. ECP-VST-G-GEN-FT-001 563/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 35 NIPPLE AB2A31-01 1/2 2 BW x MTH ACCORDING TO PIPE SCHEDULE T-01 36 NIPPLE AB2A31-01 1/2 2 PE T-01 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS FOR L = 150. CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, FOR L = 100. 37 NIPPLE AB2A31-01 1/2 1 1/2 PE x MTH T-01 38 NIPPLE AB2A31-01 1/2 1 1/2 PE T-01 39 ELBOW 45 DEGREES AB2A31-01 1/2 1 1/2 6000# SW A-01 40 ELBOW 90 DEGREES AB2A31-01 1/2 1 1/2 6000# SW A-01 41 ELBOW 45 DEGREES AB2A31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 42 ELBOW 45 DEGREES AB2A31-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, FOR L = 200. CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS FOR L = 200. CARBON STEEL, ELBOW 45 DEGREES FEMALE ENDS, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES FEMALE ENDS, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 43 ELBOW 90 DEGREES AB2A31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 44 ELBOW 90 DEGREES AB2A31-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 45 ELBOW 45 DEGREES R=5D AB2A31-01 4 24 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, SEAMLESS, 45 DEGREE INDUCTION BEND R = 5D, API 5L GR X65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 564/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 46 ELBOW 45 DEGREES R=5D AB2A31-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 47 45 DEGREE INDUCTION BEND R=6D AB2A31-01 6 24 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, E.R.W. 45 DEGREE INDUCTION BEND R = 5D, API 5L GR X65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, E.R.W 45 DEGREE INDUCTION BEND R = 6D, API 5L CARBON STEEL, SEAMLESS 45 DEGREE INDUCTION BEND R = 6D, API 5L GR. X65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49, BEVELED ENDS AS PER ASME B16.25. 48 45 DEGREE INDUCTION BEND R=6D AB2A31-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 49 90 DEGREE INDUCTION BEND R=6D AB2A31-01 6 24 BW ACCORDING TO PIPE SCHEDULE A-03 50 90 DEGREE INDUCTION BEND R=6D AB2A31-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 3 30 1/2 1 1/2 6 42 CARBON STEEL, SOCKOLET, ASTM A 694 F65, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A 694 F65, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, CARBON STEEL, E.R.W 45 DEGREE INDUCTION BEND R 6D, API 5L GR. X65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49 BEVELED ENDS AS PER ASME B16.25. CARBON STEEL, E.R.W 90 DEGREE INDUCTION BEND R = 6D, API 5L GR. X65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49, BEVELED ENDS AS PER ASME B16.25. CARBON STEEL, SEAMLESS 90 DEGREE INDUCTION BEND R = 6D, API 5L GR. X65, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49, BEVELED ENDS AS PER ASME B16.25. BW x SW ACCORDING TO SCHEDULE PIPE A-03AB2A31-01 BW x SW52 OLET AB2A31-0151 OLET 6000# 2 30 53 EQUAL TEE AB2A31-01 1/2 1 1/2 6000# SW A-01 BEVELED END AS PER ASME B16.25 CARBON STEEL, EQUAL TEE, ASTM A105, DIMENSIONS AS PER ASME B16.11. SOCKET WELDING ENDS SCHEDULE PIPE ECP-VST-G-GEN-FT-001 565/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 54 EQUAL TEE AB2A31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 55 EQUAL TEE AB2A31-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 56 EQUAL TEE AB2A31-01 8 36 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, EQUAL TEE, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B 16.25 CARBON STEEL, EQUAL TEE, MSS SP-75 GR. WPHY65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B 16.25. CARBON STEEL, EQUAL BARRED TEE, MSS SP-75 WPHY 65, MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16 25 3/4 1 1/2 1/2 1 1/2 2 2 3/4 1 1/2 3 42 2 30 4 36 2 30 61 COUPLING AB2A31-01 1/2 1 1/2 6000# SW x FTH A-01 CARBON STEEL, REDUCER BARRED TEE , MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING ENDS AS PER ASME B16.11 BEVELED ENDS AS PER ASME B16.25. CARBON STEEL, REDUCER TEE , MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE FEMALE ENDS, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS A-02ACCORDING TO PIPE SCHEDULE A-01 CARBON STEEL, REDUCER TEE , ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25BW x BW SW x SWAB2A31-01 6000#57 REDUCER TEE REDUCER TEE REDUCER TEE AB2A31-0158 ACCORDING TO PIPE SCHEDULE 60 REDUCER TEE BW x BW ACCORDING TO PIPE SCHEDULEAB2A31-01 59 AB2A31-01 BW x BW A-03 A-03 62 COUPLING AB2A31-01 1/2 1 1/2 6000# FTH A-01 63 COUPLING AB2A31-01 1 1 1/2 6000# SW A-01 64 HALF COUPLING AB2A31-01 1 1 1/2 6000# PE x SW A-01 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT. CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11. SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 566/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 65 HALF COUPLING AB2A31-01 1 1/2 6000# PE x FTH A-01 2 3 1/2 1 1/2 CARBON STEEL, HALF COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, PLAIN END OR THREADED END AS PER ASME B1.20.1 BW x PE ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC SWAGE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95, BEVELED ENDS AS PER ASME B16.25 66 CONCENTRIC REDUCER AB2A31-01 A-02 1/2 2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 3 42 2 30 3 3 CARBON STEEL, CONCENTRIC REDUCER NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95. MALE THREADED ENDS AS PER ASME B1.20.1. CARBON STEEL, CONCENTRIC REDUCER NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95. PLAIN ENDS CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B 16.9. BEVELED ENDS AS PER ASME B16.25 CARBON STEEL ECCENTRIC SWAGE ASTM A234 GR WPB AB2A31-01 CARBON STEEL, CONCENTRIC REDUCER NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95. MALE THREADED ENDS AS PER ASME B1.20.1, NPT, BEVELED ENDS AS PER ASME B16.25 68 CONCENTRIC REDUCER 67 CONCENTRIC REDUCER ACCORDING TO PIPE SCHEDULE AB2A31-01 BW x MTH ACCORDING TO PIPE SCHEDULE PE x MTH 69 CONCENTRIC REDUCER PE x PEAB2A31-01 A-02 A-02 A-02 70 CONCENTRIC REDUCER A-03BW x BWAB2A31-01 ACCORDING TO PIPE SCHEDULE 3 3 1/2 1 1/2 3/4 1 1/2 1/2 1 3 42 2 30 74 UNION AB2A31-01 1/2 1 1/2 3000# SW CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER MSS SP-95. BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP- 83, SOCKET WELDING END AS PER ASME 16.11 CARBON STEEL, ECCENTRIC SWAGE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95. BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCER NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95. MALE THREADED ENDS AS PER ASME B1.20.1. A-02BW x PEAB2A31-01 PE x MTH ACCORDING TO PIPE SCHEDULE71 ECCENTRIC REDUCER 72 ECCENTRIC REDUCER A-02 A-0373 ECCENTRIC REDUCER BW x BW ACCORDING TO PIPE SCHEDULE AB2A31-01 AB2A31-01 ECP-VST-G-GEN-FT-001 567/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 75 PLUG AB2A31-01 1/2 1 1/2 MTH 76 CAP AB2A31-01 1/2 1 1/2 6000# FTH A-01 77 CAP AB2A31 01 1/2 1 1/2 6000# SW A 01 CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME 77 CAP AB2A31-01 1/2 1 1/2 6000# SW A-01 78 CAP AB2A31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 79 CAP AB2A31-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 80 FLANGE AB2A31-01 1/2 1 1/2 300# RF ACCORDING TO PIPE SCHEDULE B-01 81 FLANGE AB2A31-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 82 FLANGE AB2A31-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE B-04 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKET WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RAISED FACE , , , B16.11, SOCKET WELDING ENDS. CARBON STEEL, CAP, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 83 FLANGE AB2A31-01 26 42 300# RF ACCORDING TO PIPE SCHEDULE B-04 84 FLANGE AB2A31-01 4 14 600# RF ACCORDING TO PIPE SCHEDULE B-04 CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.47, RAISED FACE CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RAISED FACE ECP-VST-G-GEN-FT-001 568/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 85 FLANGE AB2A31-01 1 1/2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 86 FLANGE AB2A31-01 6 8 300# BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, SPECIAL DESIGN, CALCULATED FOR TO RESIST 50 TONS OF THRUST FORCE CARBON STEEL, LONG WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER MANUFACTURER´S STD, RAISED FACE 87 FLANGE AB2A31-01 8 8 300# BW x BW ACCORDING TO PIPE SCHEDULE 88 FLANGE AB2A31-01 8 8 300# BW x BW ACCORDING TO PIPE SCHEDULE 89 FLANGE AB2A31-01 16 20 300# BW x BW ACCORDING TO PIPE SCHEDULE 90 BLIND FLANGE AB2A31-01 1/2 2 300# RF B-03 91 BLIND FLANGE AB2A31-01 3 24 300# RF B-05 CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, SPECIAL DESIGN, CALCULATED FOR TO RESIST 80 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, SPECIAL DESIGN, CALCULATED FOR TO RESIST 25 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, SPECIAL DESIGN, CALCULATED FOR TO RESIST 250 TONS OF THRUST FORCE CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 92 BLIND FLANGE AB2A31-01 26 42 300# RF B-05 CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 569/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 93 ORIFICE FLANGE AB2A31-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE 94 ORIFICE FLANGE AB2A31-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE CARBON STEEL, COUPLE ORIFICE WELDING NECK FLANGE, ASTM A694 F65, 1/2" THREADED-TAP, DIMENSIONS AS PER ASME B16.36, RAISED FACE CARBON STEEL, COUPLE ORIFICE WELDING NECK FLANGE, ASTM A105, 1/2" THREADED-TAP, DIMENSIONS AS PER ASME B16.36, RAISED FACE 95 PADDLE BLIND AB2A31-01 14 30 300# RF 96 SPACER RING AB2A31-01 14 30 300# RF 97 FIGURE 8 AB2A31-01 1/2 12 300# RF 98 GASKET AB2A31-01 1/2 42 300# RF E-01 CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS; WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS; WAFER JOINT TYPE CARBON STEEL, SPECTACLE BLIND FIGURE 8S, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE, WAFER JOINT TYPE STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5; OUTER RING 99 INSULATION KIT AB2A31-01 1 42 300# E-04 100 BOLTING AB2A31-01 P-01 INSULATION KIT, GAKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 B16.5; OUTER RING ECP-VST-G-GEN-FT-001 570/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR X52 DATE: 05-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 250 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 PRODUCED FLUID PFL 200 680 300 655 400 635 500 605 600 570 650 550 700 530 750 505 800 410 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 FLANGE FINISH ANSI RATING ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" RF AB2A31-02 ECP-VST-G-GEN-FT-001 571/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR X52 DATE: 05-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 250 FLANGE FINISH ANSI RATING ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" RF AB2A31-02 ECP-VST-G-GEN-FT-001 572/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB2A31-02 1/2 1 1/2 800# SW GA04F0B2 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL COMPONENTS DESCRIPTION 2 GATE VALVE AB2A31-02 1/2 1 1/2 800# FTH GA04H0B2 3 GATE VALVE AB2A31-02 2 10 300# RF GA02A0B1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL 4 GATE VALVE AB2A31-02 12 24 300# RF GA02A0B1 5 GATE VALVE AB2A31-02 26 30 300# RF GA02A0B1 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600 FOR FLG ASME B16.47 SERIES B, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR ECP-VST-G-GEN-FT-001 573/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 6 GATE VALVE AB2A31-02 2 10 300# RF GA02A0B3 CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE. OPERATION: HAND 7 GATE VALVE AB2A31-02 6 20 300# RF GA02A0B3 8 GATE VALVE AB2A31-02 8 24 300# RF GA02A0B3 , WHEEL CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 316L-GRAPHITE FILLER, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING SEALANT INJECTION, OPERATION: GEAR CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H GASKET: SPIRAL/W AISI 304 GRAPHITE FILLER WEDGE: 9 GATE VALVE AB2A31-02 26 36 300# RF GA02A0B3 A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTENCARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FL, OPERATION: GEAR CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D / FLG TYPE ASME B16.47 SERIES B, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF(TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE ECP-VST-G-GEN-FT-001 574/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 10 CHECK VALVE AB2A31-02 2 4 300# RF CK02A0B1 CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, FB, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 602, RAISED FACE FLANGED ENDS, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 6D / API 602 11 CHECK VALVE AB2A32-01 6 24 300# RF CK02A0B1 12 CHECK VALVE AB2A32-01 26 36 300# RF CK02A0B1 13 GLOBE VALVE AB2A31 02 1/2 1 1/2 800# SW GL04F0B2 CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A-105, ALL APLICABLE POINTS AS FOR API 602, SOCKET WELDING ENDS AS PER ASME B16.11, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7 NUTS A194/2H GASKET: SPIRAL/W AISI 304 GRAPHITE CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: ACCORDING TO API 6D CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.47. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: ACCORDING TO API 6D 13 GLOBE VALVE AB2A31-02 1/2 1 1/2 800# SW GL04F0B2 14 GLOBE VALVE AB2A31-02 2 6 300# RF GL02A0B2 A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 600, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL ECP-VST-G-GEN-FT-001 575/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 15 GLOBE VALVE AB2A31-02 8 16 300# RF GL02A0B2 CARBON STEEL, GLOBE VALVE LP, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, BALL VLV EXT.FEM.END W/2NIP FB, FLOATING, FULL PORT, ASTM A-105, DIMENSIONS AS PER ASME B16.34, TESTS 16 BALL VALVE AB2A31-02 1/2 1 1/2 800# PE BA04G0I1J 17 BALL VALVE AB2A31-02 2 4 300# RF BA02A0B1 18 BALL VALVE AB2A31-02 6 36 300# RF BA02A0I2JH CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34/API 6D, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON FIRE SAFE: API 607/ API 6FA OPERATION: GEAR FULL PORT, ASTM A-105, DIMENSIONS AS PER ASME B16.34, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: + 6” NIPPLES WELDED + A106 GR B + SCH 160 19 BALL VALVE AB2A31-02 6 8 300# RF BA02A0I2JN 20 BALL VALVE AB2A31-02 6 36 300# RF BA02A0I1J SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, DOUBLE BLOCK AND BLEED CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, DOUBLE PISTON EFFECT ON ONE SEAT CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34/API 6D, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR ECP-VST-G-GEN-FT-001 576/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 21 NEEDLE VALVE AB2A31-02 3/4 1 800# SW NE04F0B2 22 PIPE AB2A31-03 1/2 3/4 PE 160 T-01 CARBON STEEL, NEEDLE VALVE, ASTM A105, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34, SOCKET WELDING ENDS AS PER ASME B16.11, TEST AS PER API 598, BODY/BONNET: BOLTED, TRIM: API TRIM 8, SEATS: RENEWABLE TYPE, DISC: NEEDLE, STEM: O.S. & Y. / RISING STEM RISING OPERATOR, OPERATION: LEVER, PACKING: FLEXIBLE GRAPHITE CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. 23 PIPE AB2A31-03 1 1 1/2 PE 80 T-01 24 PIPE AB2A31-03 2 2 BE 80 T-01 25 PIPE AB2A31-03 3 6 BE STD T-01 26 PIPE AB2A31-03 8 22 BE 30 T-01 27 PIPE AB2A31-03 24 24 BE XS T-01 28 PIPE AB2A31-03 26 26 BE 20 T-01 29 PIPE AB2A31-03 28 30 BE 30 T-01 CARBON STEEL, D.S.A.W., PIPE, API 5L GR X52, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR X52, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR X52, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR X52, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W., PIPE, API 5L GR X52, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 30 PIPE AB2A31-03 36 36 BE 30 T-01 31 PIPE AB2A31-03 42 42 BE API 0,75 T-01 32 ELBOW 45 DEGREES AB2A31-02 1/2 1 1/2 6000# SW A-01 33 ELBOW 45 DEGREES AB2A31-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 34 ELBOW 45 DEGREES AB2A31-02 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 RANDOM LENGHT 2 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 52, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, D.S.A.W., PIPE, API 5L GR X52, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W., PIPE, API 5L GR X52, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 577/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 35 ELBOW 90 DEGREES AB2A31-02 1/2 1 1/2 6000# SW A-01 36 ELBOW 90 DEGREES AB2A31-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 37 ELBOW 90 DEGREES AB2A31-02 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 52, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL SEAMLESS 45 DEGREE INDUCTION BEND R = 5D 38 45 DEGREE ELBOW R = 5D AB2A31-03 4 24 BW ACCORDING TO PIPE SCHEDULE A-03 39 45 DEGREE ELBOW R = 5D AB2A31-03 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 40 45 DEGREE INDUCTION BEND R = 6D AB2A31-03 6 24 BW ACCORDING TO PIPE SCHEDULE A-03 41 45 DEGREE INDUCTION BEND R = 6D AB2A31-03 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 2 3 1/2 1 1/2 1/2 2 1/2 3/4 CARBON STEEL, E.R.W. 45 DEGREE INDUCTION BEND R = 5D, API 5L GR X52, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, E.R.W. 45 DEGREE INDUCTION BEND R = 6D, API 5L GR X52, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 CARBON STEEL, SEAMLESS, 45 DEGREE INDUCTION BEND R = 6D, API 5L GR X52, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, SEAMLESS, 45 DEGREE INDUCTION BEND R = 5D, API 5L GR X52, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. A-0243 CONCENTRIC REDUCER BW x MTH XXSAB2A31-02 ACCORDING TO PIPE SCHEDULEBW x PEAB2A31-02 A-02CONCENTRIC REDUCER42 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 3 42 2 30 3 3 1/2 1 1/2 3/4 1 1/2 1/2 1 CARBON STEEL, ECCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 52, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-0248 ECCENTRIC REDUCER AB2A31-02 PE x MTH XXS A-03 47 ECCENTRIC REDUCER AB2A31-02 BW x PE ACCORDING TO PIPE SCHEDULE A-02 46 CONCENTRIC REDUCER AB2A31-02 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 A-0245 CONCENTRIC REDUCER AB2A31-02 PE x PE ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS 44 CONCENTRIC REDUCER AB2A31-02 PE x MTH XXS A-02 ECP-VST-G-GEN-FT-001 578/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 3 42 2 30 50 CAP AB2A31-02 1/2 1 1/2 6000# FTH A-01 51 CAP AB2A31-02 1/2 1 1/2 6000# SW A-01 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 52, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 49 ECCENTRIC REDUCER AB2A31-02 BW x BW ACCORDING TO PIPE SCHEDULE A-03 52 CAP AB2A31-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 53 CAP AB2A31-02 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 54 STRAIGHT TEE AB2A31-02 1/2 1 1/2 6000# SW A-01 55 STRAIGHT TEE AB2A31-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 56 STRAIGHT TEE AB2A31-02 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 3/4 1 1/2 1/2 1 1/2 2 2 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 52, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 52, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 REDUCER TEE AB2A31-02 6000# SW x SW A-01 58 REDUCER TEE AB2A31 02 BW BW ACCORDING TO A 02 57 3/4 1 1/2 3 42 2 30 60 STRAIGHT BARRED TEE AB2A31-02 8 36 BW ACCORDING TO PIPE SCHEDULE A-03 4 36 2 30 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 52, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 52, MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25. CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 52, MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25. A-03 A-0361 REDUCER BARRED TEE AB2A31-02 BW x BW ACCORDING TO PIPE SCHEDULE 59 REDUCER TEE AB2A31-02 BW x BW ACCORDING TO PIPE SCHEDULE 58 REDUCER TEE AB2A31-02 BW x BW ACCORDING TO PIPE SCHEDULE A-02 ECP-VST-G-GEN-FT-001 579/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 3 30 1/2 1 1/2 6 42 2 24 64 PLUG AB2A31-02 1/2 1 1/2 6000# MTH CARBON STEEL, WELDOLET, ASTM A694 F52, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER CARBON STEEL, SOCKOLET, ASTM A694 F52, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 AB2A31-02 BW x BW BW x SW ACCORDING TO PIPE SCHEDULE 6000# OLET A-0363 62 OLET AB2A31-02 64 PLUG AB2A31 02 1/2 1 1/2 6000# MTH 65 COUPLING AB2A31-02 1/2 1 1/2 6000# FTH A-01 66 COUPLING AB2A31-02 1/2 1 1/2 6000# SW x FTH A-01 67 COUPLING AB2A31-02 1 1 1/2 6000# SW A-01 68 HALF COUPLING AB2A31-02 1 1 1/2 6000# PE x FTH A-01 69 HALF COUPLING AB2A31-02 1 1 1/2 6000# PE x SW A-01 CARBON STEEL, HALF COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, PLAIN ENDS, SOCKET WELDING ENDS AS PER ASME DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, HALF COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, PLAIN END, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 70 NIPPLE AB2A31-02 1/2 1 1/2 MTH XXS T-01 71 NIPPLE AB2A31-02 1/2 2 PE x MTH XXS A-01 B16.11 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, MALE THREADED END AS PER ASME B1.20.1, NPT, L = 100mm - (1/2" - 2"); L = 200mm - (1/2" - 1 1/2") ECP-VST-G-GEN-FT-001 580/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 72 NIPPLE AB2A31-02 1/2 2 PE 160 A-01 73 NIPPLE AB2A31-02 1/2 2 BW x MTH XXS A-01 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100; 200 mm - (1/2" - 11/2"); L = 150mm - (1/2" - 2") CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100mm 74 FLANGE AB2A31-02 1/2 1 1/2 300# RF ACCORDING TO PIPE SCHEDULE B-01 75 FLANGE AB2A31-02 1 1/2 2 300# RF ACCORDING TO PIPE SCHEDULE 76 FLANGE AB2A31-02 2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 77 FLANGE AB2A31-02 3 24 300# RF ACCORDING TO PIPE SCHEDULE B-04 78 FLANGE AB2A31-02 26 42 300# RF ACCORDING TO PIPE SCHEDULE B-04 79 FLANGE AB2A31-02 16 16 300# BW x BW ACCORDING TO PIPE SCHEDULE 80 BLIND FLANGE AB2A31-02 1/2 2 300# RF B-03 CARBON STEEL, LONG WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS MANUFACTURER´S STD, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F52, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F52, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A694 F52, SPECIAL DESIGN, CALCULATED FOR TO RESIST 280 TONS OF THRUST FORCE CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, SOCKET WELD FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 81 BLIND FLANGE AB2A31-02 3 24 300# RF B-05 82 BLIND FLANGE AB2A31-02 26 42 300# RF B-05 83 COUPLE ORIFICE FLANGE AB2A31-02 2 2 300# RF ACCORDING TO PIPE SCHEDULE 84 COUPLE ORIFICE FLANGE AB2A31-02 3 24 300# RF ACCORDING TO PIPE SCHEDULE CARBON STEEL, BLIND FLANGE, ASTM A694 F52, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F52, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, COUPLE OF WELDING NECK FLANGE WITH 1/2" TH TAP, ASTM A105, DIMENSIONS AS PER ASME B16.36, RAISED FACE FLANGED ENDS CARBON STEEL, COUPLE OF WELDING NECK FLANGE WITH 1/2" TH TAP, ASTM A694 F52, DIMENSIONS AS PER ASME B16.36, RAISED FACE FLANGED ENDS ECP-VST-G-GEN-FT-001 581/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 85 PADDLE BLIND AB2A31-02 14 30 300# RF 86 SPACER RING AB2A31-02 14 30 300# RF 87 FIGURE 8 AB2A31-02 1/2 12 300# RF CARBON STEEL, PADDLE BLIND ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL UNION ASTM A105 DIMENSIONS AS PER MSS SP 88 UNION AB2A31-02 1/2 1 1/2 3000# SW 89 GASKET AB2A31-02 1/2 42 300# RF E-01 90 INSULATION KIT AB2A31-02 1 42 300# STD FINISH E-04 91 BOLTING AB2A31-02 P-01 STAINLESS STEEL, SPIRAL WOUND GASKET AISI 304 SS, WITH GRAPHITE FILLER AND OUTER RING, FLEXITALLIC CG THICKNESS 1/8" INCHES, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR INSULATION KIT, DIMENSIONS AS PER MANUFACTURER'S STD, GASKET TYPE F WITH SEALS, INSULATING WASHERS, STEEL WASHERS AND INSULATING SLEEVES CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP- 83, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 582/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR X42 DATE: 04-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 250 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 PRODUCED FLUID PFL 200 680 300 655 400 635 500 605 600 570 650 550 700 530 750 505 800 410 ANSI RATING RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AB2A31-03 FLANGE FINISH NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 583/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR X42 DATE: 04-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 250 ANSI RATING RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" AB2A31-03 FLANGE FINISH ECP-VST-G-GEN-FT-001 584/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB2A31-03 1/2 1 1/2 800# SW GA04F0B2 2 GATE VALVE AB2A31-03 1/2 1 1/2 800# FTH GA04H0B2 COMPONENTS DESCRIPTION CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 GRAPHITE FILLER WEDGE SOLID TYPE SEATS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 3 GATE VALVE AB2A31-03 2 10 300# RF GA02A0B1 4 GATE VALVE AB2A31-03 12 24 300# RF GA02A0B1 SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, 5 GATE VALVE AB2A31-03 2 10 300# RF GA02A0B3 6 GATE VALVE AB2A31-03 6 18 300# RF GA02A0B3 CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 316L-GRAPHITE FILLER, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING SEALANT INJECTION, OPERATION: GEAR CARBON STEEL, CONDUIT GATE VALVE, ASTM A 216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTENCARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FL, OPERATION: HAND WHEEL ECP-VST-G-GEN-FT-001 585/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 7 GATE VALVE AB2A31-03 8 24 300# RF GA02A0B3 CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16,47, RATING AS PER ASME CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16.5, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTENCARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FL, OPERATION: GEAR 8 GATE VALVE AB2A31-03 26 36 300# RF GA02A0B3 9 CHECK VALVE AB2A31-03 2 4 300# RF CK02A0B1 10 CHECK VALVE AB2A32-01 6 24 300# RF CK02A0B1 11 CHECK VALVE AB2A32 01 26 36 300# RF CK02A0B1 FACE FLANGED ENDS AS PER ASME B16,47, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTENCARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FL, OPERATION: GEAR CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 602, RAISED FACE FLANGED ENDS, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 6D / API 602 CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: ACCORDING TO API 6D CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.47. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H GASKET: SPIRAL W 304-GRAPHITE FILLER DISC: SWING11 CHECK VALVE AB2A32-01 26 36 300# RF CK02A0B1 12 GLOBE VALVE AB2A31-03 1/2 1 1/2 800# SW GL04F0B2 13 GLOBE VALVE AB2A31-03 2 6 300# RF GL02A0B2 14 GLOBE VALVE AB2A31-03 8 16 300# RF GL02A0B2 CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A-105, ALL APLICABLE POINTS AS FOR API 602, SOCKET WELDING ENDS AS PER ASME B16.11, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: ACCORDING TO API 6D O S & , C G G , O O G ECP-VST-G-GEN-FT-001 586/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 15 BALL VALVE AB2A31-03 1/2 1 1/2 800# PE BA04G0I1J 16 BALL VALVE AB2A31-03 2 4 300# RF BA02A0I1J CARBON STEEL, BALL VLV EXT.FEM.END W/2NIP FB, FLOATING, FULL PORT, ASTM A-105, DIMENSIONS AS PER ASME B16.34, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: + 6” NIPPLES WELDED + A106 GR B + SCH 160 CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT SEATS: VITON FIRE SAFE: API 607/ API 6FA OPERATION: LEVER 17 BALL VALVE AB2A31-03 2 6 300# RF BA02A0I1JH 18 BALL VALVE AB2A31-03 8 30 300# RF BA02A0I1JH 19 BALL VALVE AB2A31-03 2 8 300# RF BA02A0I2JN OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, DOUBLE BLOCK AND BLEED CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER API 6D/ASME B16.34, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, DOUBLE PISTON EFFECT ON ONE SEAT CARBON STEEL BALL VALVE LP FB TRUNNION MOUNTED FULL CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, DOUBLE BLOCK AND BLEED, OPERATION: LEVER 20 BALL VALVE AB2A31-03 6 36 300# RF BA02A0I1J 21 NEEDLE VALVE AB2A31-03 3/4 1 800# SW NE04F0B2 22 PIPE AB2A31-03 1/2 3/4 PE 160 T-01 23 PIPE AB2A31-03 1 1 1/2 PE 80 T-01 24 PIPE AB2A31-03 2 2 BE 80 T-01 CARBON STEEL, NEEDLE VALVE, ASTM A105, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34, SOCKET WELDING ENDS AS PER ASME B16.11, TEST AS PER API 598, BODY/BONNET: BOLTED, TRIM: API TRIM 8, SEATS: RENEWABLE TYPE, DISC: NEEDLE, STEM: O.S. & Y. / RISING STEM RISING OPERATOR, OPERATION: LEVER, PACKING: FLEXIBLE GRAPHITE CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34/API 6D, RAISED FACE FLANGED ENDS, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 587/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 25 PIPE AB2A31-03 3 14 BE STD T-01 26 PIPE AB2A31-03 16 20 BE XS T-01 27 PIPE AB2A31-03 22 22 BE 60 T-01 28 PIPE AB2A31-03 24 24 BE 30 T-01 CARBON STEEL, SEAMLESS PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM 29 PIPE AB2A31-03 26 26 BE API 0625 T-01 30 PIPE AB2A31-03 28 28 BE 30 T-01 31 PIPE AB2A31-03 30 30 BE API 0,688 T-01 32 PIPE AB2A31-03 36 36 BE 40 T-01 33 PIPE AB2A31-03 42 42 BE API 0,875 T-01 34 ELBOW 45 DEGREES AB2A31-03 1/2 1 1/2 6000# SW A-01 ACCORDING TO CARBON STEEL, D.S.A.W., PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR LENGHT >= 2" CARBON STEEL, D.S.A.W., PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W., PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W., PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W., PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 35 ELBOW 45 DEGREES AB2A31-03 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 36 ELBOW 45 DEGREES AB2A31-03 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 37 45 DEGREE ELBOW R = 5D AB2A31-03 4 24 BW ACCORDING TO PIPE SCHEDULE A-03 38 45 DEGREE ELBOW R = 5D AB2A31-03 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 39 ELBOW 90 DEGREES AB2A31-03 1/2 1 1/2 6000# SW A-01 40 ELBOW 90 DEGREES AB2A31-03 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 41 ELBOW 90 DEGREES AB2A31-03 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 45 DEGREE INDUCTION BEND R = ACCORDING TO CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 , , , WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, E.R.W. 45 DEGREE INDUCTION BEND R = 5D, API 5L GR X42, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SEAMLESS, 45 DEGREE INDUCTION BEND R = 5D, API 5L GR X42, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, SEAMLESS, 45 DEGREE INDUCTION BEND R = 6D, API 42 45 DEGREE INDUCTION BEND R = 6D AB2A31-03 6 24 BW ACCORDING TO PIPE SCHEDULE A-03 5L GR X42, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. ECP-VST-G-GEN-FT-001 588/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 43 45 DEGREE INDUCTION BEND R = 6D AB2A31-03 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 44 90 DEGREE INDUCTION BEND R=6D AB2A31-03 6 24 BW ACCORDING TO PIPE SCHEDULE A-03 45 90 DEGREE INDUCTION BEND R=6D AB2A31-03 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 2 3 1/2 1 1/2 46 CONCENTRIC REDUCER AB2A31-03 A-02BW x PE ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL CONCENTRIC REDUCING NIPPLE ASTM A 234 GR CARBON STEEL, E.R.W. 45 DEGREE INDUCTION BEND R = 6D, API 5L GR X42, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, E.R.W. 90 DEGREE INDUCTION BEND R=6D, API 5L GR. X42, MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE CARBON STEEL, SEAMLESS 90 DEGREE INDUCTION BEND R=6D, API 5L GR. X42, MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE 1/2 2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 3 42 2 30 3 3 1/2 1 1/2 3/4 1 1/2 1/2 1 3 42 2 30 54 CAP AB2A31-03 1/2 1 1/2 6000# FTH A-01 55 CAP AB2A31-03 1/2 1 1/2 6000# SW A-01 48 49 CONCENTRIC REDUCER AB2A31-03 47 CONCENTRIC REDUCER AB2A31-03 BW x MTH XXS A-02 CONCENTRIC REDUCER AB2A31-03 A-02 PE x PE PE x MTH XXS A-0350 CONCENTRIC REDUCER CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-02 AB2A31-03 BW ACCORDING TO PIPE SCHEDULE 51 ECCENTRIC REDUCER AB2A31-03 A-02 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 52 ECCENTRIC REDUCER AB2A31-03 A-02 BW x PE ACCORDING TO PIPE SCHEDULE BW ACCORDING TO PIPE SCHEDULE PE x MTH ACCORDING TO PIPE SCHEDULE 53 ECCENTRIC REDUCER AB2A31-03 A-03 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16 11 CARBON STEEL, ECCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS 55 CAP AB2A31-03 1/2 1 1/2 6000# SW A-01 56 CAP AB2A31-03 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 57 CAP AB2A31-03 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 58 STRAIGHT TEE AB2A31-03 1/2 1 1/2 6000# SW ACCORDING TO PIPE SCHEDULE A-01 3/4 1 1/2 1/2 1 1/2 60 STRAIGHT TEE AB2A31-03 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 2 2 3/4 1 1/2 62 STRAIGHT TEE AB2A31-03 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 3 42 2 30 SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 SW x SW ACCORDING TO PIPE SCHEDULE A-0159 REDUCER TEE AB2A31-03 6000# 63 REDUCER TEE AB2A31-03 BW x BW ACCORDING TO PIPE SCHEDULE61 REDUCER TEE AB2A31-03 A-02 BW x BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 589/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 64 STRAIGHT BARRED TEE AB2A31-03 6 36 BW ACCORDING TO SCHEDULE PIPE A-03 6 36 3 30 2 24 1/2 1 1/2 6 42 3 24 BW x SW A-03BW x BW ACCORDING TO PIPE SCHEDULE 67 OLET AB2A31-03 66 OLET AB2A31-03 6000# A-03BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 42, MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25. CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 42, MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25. 65 REDUCER BARRED TEE AB2A31-03 CARBON STEEL, SOCKOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL PLUG SOLID ROUND HEAD TYPE ASTM A 105 68 PLUG AB2A31-03 1/2 1 1/2 6000# MTH 69 COUPLING AB2A31-03 1/2 1 1/2 6000# FTH A-01 70 COUPLING AB2A31-03 1/2 1 1/2 6000# SW x FTH A-01 71 COUPLING AB2A31-03 1 1 1/2 6000# SW A-01 72 HALF COUPLING AB2A31-03 1 1 1/2 6000# PE x FTH A-01 73 HALF COUPLING AB2A31-03 1 1 1/2 6000# PE x SW A-01 74 NIPPLE AB2A31-03 1/2 1 1/2 MTH ACCORDING TO PIPE SCHEDULE T-01 75 NIPPLE AB2A31-03 1/2 2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, HALF COUPLING, ASTM A 105, DIMENSIONS AS PER ASME B16.11, PLAIN END, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100mm - (1/2" - 2"); L = 200mm - (1/2" - 1 1/2") CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A 105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, HALF COUPLING, ASTM A 105, DIMENSIONS AS PER ASME B16.11, PLAIN ENDS, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100 mm 76 NIPPLE AB2A31-03 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 77 NIPPLE AB2A31-03 1/2 2 BW x MTH ACCORDING TO PIPE SCHEDULE T-01 78 FLANGE AB2A31-03 1/2 1 1/2 300# RF ACCORDING TO PIPE SCHEDULE B-01 79 FLANGE AB2A31-03 1 1/2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 80 FLANGE AB2A31-03 2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 (1/2 - 1 1/2 ) CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100; 150; 200 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100mm CARBON STEEL, SOCKET WELD FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, LONG WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS MANUFACTURER´S STD, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 590/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 81 FLANGE AB2A31-03 3 24 300# RF ACCORDING TO PIPE SCHEDULE B-04 82 FLANGE AB2A31-03 26 42 300# RF ACCORDING TO PIPE SCHEDULE B-04 83 FLANGE AB2A31-03 14 14 600# RF ACCORDING TO PIPE SCHEDULE B-04 84 FLANGE AB2A31-03 6 8 300# BW x BW ACCORDING TO PIPE SCHEDULE ACCORDING TO CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.47, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, SPECIAL DESIGN, CALCULATED FOR TO RESIST 50 TONS OF THRUST FORCE CARBON STEEL ANCHOR FLANGE ASTM A694 F42 SPECIAL DESIGN CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 85 FLANGE AB2A31-03 8 8 300# BW x BW ACCORDING TO PIPE SCHEDULE 86 FLANGE AB2A31-03 8 8 300# BW x BW ACCORDING TO PIPE SCHEDULE 87 FLANGE AB2A31-03 16 16 300# BW x BW ACCORDING TO PIPE SCHEDULE 88 BLIND FLANGE AB2A31-03 1/2 2 300# RF B-03 89 BLIND FLANGE AB2A31-03 3 24 300# RF B-05 90 BLIND FLANGE AB2A31-03 26 42 300# RF B-05 91 COUPLE ORIFICE FLANGE AB2A31-03 2 2 300# RF ACCORDING TO PIPE SCHEDULE 92 COUPLE ORIFICE FLANGE AB2A31-03 3 24 300# RF ACCORDING TO PIPE SCHEDULE 93 PADDLE BLIND AB2A31-03 14 30 300# RF 94 SPACER RING AB2A31-03 14 30 300# RF CARBON STEEL, COUPLE OF WELDING NECK FLANGE WITH 1/2" TH TAP, ASTM A-105, DIMENSIONS AS PER ASME B16.36, RAISED FACE FLANGED ENDS CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, SPECIAL DESIGN, CALCULATED FOR TO RESIST 25 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, SPECIAL DESIGN, CALCULATED FOR TO RESIST 250 TONS OF THRUST FORCE CARBON STEEL, BLIND FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, PADDLE BLIND ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16 48 RAISED FACE ENDS WAFER JOINT TYPE CARBON STEEL, COUPLE OF WELDING NECK FLANGE WITH 1/2" TH TAP, ASTM A 694 F42, DIMENSIONS AS PER ASME B16.36, RAISED FACE FLANGED ENDS CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.47, RAISED FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, SPECIAL DESIGN, CALCULATED FOR TO RESIST 80 TONS OF THRUST FORCE 95 FIGURE 8 AB2A31-03 1/2 12 300# RF 96 UNION AB2A31-03 1/2 1 1/2 3000# SW 97 GASKET AB2A31-03 1/2 42 300# RF E-01 98 INSULATION KIT AB2A31-03 1 42 300# STD FINISH E-04 99 BOLTING AB2A31-03 P-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 INSULATION KIT, DIMENSIONS AS PER MANUFACTURER'S STD, GASKET TYPE F WITH SEALS, INSULATING WASHERS, STEEL WASHERS AND INSULATING SLEEVES PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, UNION, ASTM A 105, DIMENSIONS AS PER MSS SP- 83, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, SPIRAL WOUND GASKET AISI 304 SS, WITH GRAPHITE FILLER AND OUTER RING, FLEXITALLIC CG THICKNESS 1/8" INCHES, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 ECP-VST-G-GEN-FT-001 591/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: C DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR X42 DATE: 04-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 OIL AND WATER MIXTURE CRW 200 680 RAW WATER RAW 300 655 400 635 500 605 600 570 650 550 700 530 750 505 800 410 RF AB2A32-01 FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/8" ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 592/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: C DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR X42 DATE: 04-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 RF AB2A32-01 FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/8" ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A-105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A 694 F42 / MSS SP-75 WPHY 42 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ECP-VST-G-GEN-FT-001 593/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB2A32-01 1/2 1 1/2 800# SW GA04F0B2 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL COMPONENTS DESCRIPTION 2 GATE VALVE AB2A32-01 1/2 1 1/2 800# FTH GA04H0B2 3 GATE VALVE AB2A32-01 2 10 300# RF GA02A0B1 CARBON STEEL, GATE VALVE, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL 4 GATE VALVE AB2A32-01 12 24 300# RF GA02A0B1 5 GATE VALVE AB2A32-01 8 24 300# RF GA02A0B3 6 GATE VALVE AB2A32-01 26 36 300# RF GA02A0B3 B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, CONDUIT GATE VALVE , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME B16.47. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, CARBON STEEL, CONDUIT GATE VALVE , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME B16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE. GEAR OPERATOR TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE. GEAR OPERATOR ECP-VST-G-GEN-FT-001 594/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 7 CHECK VALVE AB2A32-01 2 4 300# RF CK02A0B1 CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 602, RAISED FACE FLANGED ENDS, FB, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304- GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: ACCORDING TO API 6D 8 CHECK VALVE AB2A32-01 6 24 300# RF CK02A0B1 9 CHECK VALVE AB2A32-01 26 36 300# RF CK02A0B1 10 GLOBE VALVE AB2A32-01 1/2 1 1/2 800# SW GL04F0B2 CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: ACCORDING TO API 6D CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A-105, ALL APLICABLE POINTS AS FOR BS 1873, SOCKET WELDING ENDS AS PER ASME B16.11, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE SEAT: RENEWABLE TYPE TRIM: F6 STELLITE (API CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.47. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: ACCORDING TO API 6D 11 GLOBE VALVE AB2A32-01 2 6 300# RF GL02A0B2 12 GLOBE VALVE AB2A32-01 8 16 300# RF GL02A0B2 SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GLOBE VALVE LP, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR ASME B16.34/BS 1873, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873/ASME B16.34, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR ECP-VST-G-GEN-FT-001 595/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 13 BALL VALVE AB2A32-01 1/2 1 1/2 800# PE BA04G0I1J CARBON STEEL, BALL VLV EXT.FEM.END W/2NIP FB, FLOATING, FULL PORT, ASTM A-105, DIMENSIONS AS PER ASME B16.34, TESTS AS PER API 598, CONSTRUCTION AS PER ASME B 16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: + 6” NIPPLES WELDED + A106 GR B + SCH 160 CARBON STEEL BALL VALVE LP FB TRUNNION MOUNTED FULL PORT 14 BALL VALVE AB2A32-01 2 4 300# RF BA02A0B1 15 BALL VALVE AB2A32-01 6 24 300# RF BA02A0I1J 16 BALL VALVE AB2A32-01 26 36 300# RF BA02A0I1J CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16,47, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.10, RAISED FACE FLANGED ENDS AS PER ASME B16,5, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR; ACCORDING TO API 6D/ASME B16.34 CARBON STEEL, BALL VALVE LP FB, TRUNNION MOUNTED, FULL PORT, ASTM A-216 GR. WCB, ACCORDING TO API 608, DIMENSIONS AND CONSTRUCTION AS PER ASME B16.34, RAISED FACE FLANGED ENDS AS PER ASME B16,5, TEST AS PER API 598, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER 17 PIPE AB2A32-01 1/2 3/4 PE 160 T-01 18 PIPE AB2A32-01 1 1 1/2 PE 80 T-01 19 PIPE AB2A32-01 2 2 BE 80 T-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" VITON, BALL: AISI 316, STEM: AISI 316 ANTI BLOW OUT, SEATS: VITON, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR; ACCORDING TO API 6D/ASME B16.34 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. ECP-VST-G-GEN-FT-001 596/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 20 PIPE AB2A32-01 3 14 BE STD T-01 21 PIPE AB2A32-01 16 16 BE 40 T-01 CARBON STEEL, PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.R.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.R.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME 22 PIPE AB2A32-01 18 20 BE XS T-01 23 PIPE AB2A32-01 22 22 BE 60 T-01 24 PIPE AB2A32-01 24 24 BE 30 T-01 25 PIPE AB2A32-01 26 26 BE API 0,625 T-01 26 PIPE AB2A32-01 28 28 BE 30 T-01 27 PIPE AB2A32-01 30 30 BE API 0,688 T-01 CARBON STEEL, E.R.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.R.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT > 2" B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 28 PIPE AB2A32-01 36 36 BE 40 T-01 29 PIPE AB2A32-01 42 42 BE API 0,875 T-01 30 ELBOW 45 DEGREES AB2A32-01 1/2 1 1/2 6000# SW A-01 31 ELBOW 45 DEGREES AB2A32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 32 ELBOW 45 DEGREES AB2A32-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 >= 2" CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A 234 GR WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, D.S.A.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, D.S.A.W. PIPE, API 5L GR X42, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 597/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 33 ELBOW 90 DEGREES AB2A32-01 1/2 1 1/2 6000# SW A-01 34 ELBOW 90 DEGREES AB2A32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 35 ELBOW 90 DEGREES AB2A32-01 3 42 BW ACCORDING TO A-03 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42 DIMENSIONS AS PER ASME B16 9 BEVELED ENDS AS PER ASME35 ELBOW 90 DEGREES AB2A32-01 3 42 BW PIPE SCHEDULE A-03 36 45 DEGREE INDUCTION BEND R = 6D AB2A32-01 6 24 BW ACCORDING TO PIPE SCHEDULE A-03 37 45 DEGREE INDUCTION BEND R = 6D AB2A32-01 26 42 BW ACCORDING TO PIPE SCHEDULE A-03 2 3 1/2 1 1/2 1/2 2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 38 CONCENTRIC REDUCER PE x MTH XXS A-0240 CONCENTRIC REDUCER AB2A32-01 BW x MTH XXS A-0239 CONCENTRIC REDUCER AB2A32-01 A-02AB2A32-01 BW x PE ACCORDING TO PIPE SCHEDULE 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, E.R.W. 45 DEGREE INDUCTION BEND R = 6D, API 5L GR X42, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 CARBON STEEL CONCENTRIC REDUCING NIPPLE ASTM A 234 GR WPB CARBON STEEL, SEAMLESS, 45 DEGREE INDUCTION BEND R = 6D, API 5L GR X42, MANUF.S STD / ASME B16.9 ALL POINTS APPLICABLE, ACCORDING TO ASME B16.49. 1/2 1 3 42 2 30 BW x BW ACCORDING TO PIPE SCHEDULE A-0342 CONCENTRIC REDUCER AB2A32-01 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 PE x PE 160 A-0241 CONCENTRIC REDUCER AB2A32-01 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN ENDS ECP-VST-G-GEN-FT-001 598/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 2 3 1/2 1 1/2 3/4 1 1/2 1/2 1 3 42 BW x BW ACCORDING TO A-0345 ECCENTRIC REDUCER AB2A32-01 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 42, PE x MTH XXS A-0244 ECCENTRIC REDUCER AB2A32-01 CARBON STEEL, ECCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, THREADED END AS PER ASME B1.20.1 BW x PE ACCORDING TO PIPE SCHEDULE A-0243 ECCENTRIC REDUCER AB2A32-01 CARBON STEEL, ECCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PLAIN END, BEVELED END AS PER ASME B16.25, BW x PE 2 30 46 CAP AB2A32-01 1/2 1 1/2 6000# FTH A-01 47 CAP AB2A32-01 1/2 1 1/2 6000# SW A-01 48 CAP AB2A32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 49 CAP AB2A32-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 50 STRAIGHT TEE AB2A32-01 1/2 1 1/2 6000# SW A-01 3/4 1 1/2 1/2 1 1/2 52 STRAIGHT TEE AB2A32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 SW A-0151 REDUCER TEE AB2A32-01 6000# BW x BW PIPE SCHEDULE A-0345 ECCENTRIC REDUCER AB2A32-01 DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16 9 BEVELED ENDS AS PER ASME B16 25 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 52 STRAIGHT TEE AB2A32 01 2 2 BW PIPE SCHEDULE A 02 2 2 3/4 1 1/2 54 STRAIGHT TEE AB2A32-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 3 42 2 30 2 24 1/2 1 1/2 6 42 3 24 59 PLUG AB2A32-01 1/2 1 1/2 6000# MTH BW ACCORDING TO PIPE SCHEDULE A-0355 REDUCER TEE AB2A32-01 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 BW ACCORDING TO PIPE SCHEDULE A-0253 REDUCER TEE AB2A32-01 CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 BW x BW ACCORDING TO PIPE SCHEDULE A-0357 OLET AB2A32-01 CARBON STEEL, WELDOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS- SP-97, BEVELED ENDS AS PER ASME B16.25 BW x SW56 OLET AB2A32-01 6000# CARBON STEEL, SOCKOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS- SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, PLUG SOLID, ROUND HEAD TYPE, ASTM A 105, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT ECP-VST-G-GEN-FT-001 599/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 60 COUPLING AB2A32-01 1 1 1/2 6000# FTH A-01 61 COUPLING AB2A32-01 1/2 1 1/2 6000# SW x FTH A-01 62 COUPLING AB2A32-01 1 1 1/2 6000# SW A-01 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, COUPLING, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 63 HALF COUPLING AB2A32-01 1 1 1/2 6000# PE x FTH A-01 64 HALF COUPLING AB2A32-01 1 1 1/2 6000# PE x SW A-01 65 NIPPLE AB2A32-01 1/2 1 1/2 MTH XXS T-01 66 NIPPLE AB2A32-01 1/2 1 1/2 PE x MTH XXS T-01 67 NIPPLE AB2A32-01 1/2 1 1/2 PE 160 T-01 68 FLANGE AB2A32-01 1/2 1 1/2 300# RF ACCORDING TO PIPE SCHEDULE B-01 , CARBON STEEL, HALF COUPLING, ASTM A 105, DIMENSIONS AS PER ASME B16.11, PLAIN ENDS, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT CARBON STEEL, HALF COUPLING, ASTM A 105, DIMENSIONS AS PER ASME B16.11, PLAIN END, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L = 100 & 200 mm CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16 5 RAISED FACE FLANGED END CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100 & 200 mm PIPE SCHEDULE 69 FLANGE AB2A32-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 70 FLANGE AB2A32-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE B-04 71 FLANGE AB2A32-01 26 42 300# RF ACCORDING TO PIPE SCHEDULE B-04 72 FLANGE AB2A32-01 6 6 300# BW x BW ACCORDING TO PIPE SCHEDULE 73 BLIND FLANGE AB2A32-01 1/2 2 300# RF B-03 74 BLIND FLANGE AB2A32-01 2 24 300# RF B-05 CARBON STEEL, BLIND FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.47, RAISED FACE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 55 TONS OF THRUST FORCE CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 600/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 75 BLIND FLANGE AB2A32-01 26 42 300# RF B-05 76 COUPLE ORIFICE FLANGE AB2A32-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE ACCORDING TO CARBON STEEL, BLIND FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, COUPLE OF WELDING NECK FLANGE WITH 1/2" TH TAP, ASTM A-105, DIMENSIONS AS PER ASME B16.36, RAISED FACE FLANGED ENDS CARBON STEEL, COUPLE OF WELDING NECK FLANGE WITH 1/2" TH TAP, 77 COUPLE ORIFICE FLANGE AB2A32-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE 78 PADDLE BLIND AB2A32-01 14 30 300# RF 79 SPACER RING AB2A32-01 14 30 300# RF 80 FIGURE 8 AB2A32-01 1/2 12 300# RF 81 UNION AB2A32-01 1/2 1 1/2 6000# SW x FTH 82 GASKET AB2A32-01 1/2 42 300# E-01 CARBON STEEL, UNION, ASTM A 105, MANUF. STD / ASME B16.11 ALL POINTS APPLICABLE, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, SPIRAL WOUND GASKET AISI 304 SS, WITH GRAPHITE FILLER AND OUTER RING, FLEXITALLIC CG THICKNESS 1/8" INCHES, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 , , ASTM A 694 F42, DIMENSIONS AS PER ASME B16.36, RAISED FACE FLANGED ENDS CARBON STEEL, PADDLE BLIND ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE 83 INSULATION KIT AB2A32-01 1 42 300# STD FINISH E-04 84 BOLTING AB2A32-01 P-01 INSULATION KIT, DIMENSIONS AS PER MANUFACTURER'S STD, GASKET TYPE F WITH SEALS, INSULATING WASHERS, STEEL WASHERS AND INSULATING SLEEVES CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 601/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR. X42 DATE: 02-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 740 DILUTED PRODUCED FLUID DPF 200 680 300 655 400 635 500 605 600 570 650 550 700 530 750 505 800 410 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB2A51-01 FLANGE FINISH 1/4" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS /ASTM A105 / ASTM A694 F42 / ASTM A234 GR. WPB / MSS SP-75 WPHY 42 / ASTM A216 GR. WCB / ASTM A516 GR. 70 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 602/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 740 API 5L GR. X42 DATE: 02-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 100 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB2A51-01 FLANGE FINISH 1/4" POR: CORROSION ALLOWANCE RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS /ASTM A105 / ASTM A694 F42 / ASTM A234 GR. WPB / MSS SP-75 WPHY 42 / ASTM A216 GR. WCB / ASTM A516 GR. 70 ECP-VST-G-GEN-FT-001 603/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB2A51-01 3/4 1 1/2 800# SW GA04F0B2 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A-105, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 2 GATE VALVE AB2A51-01 3/4 1 1/2 800# FTH GA04H0B2 3 GATE VALVE AB2A51-01 2 10 300# RF GA02A0B1 HAND WHEEL CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, FEMALE THREADED ENDS, AS PER ANSI B 1.20.1, NPT, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: SOLID TYPE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GATE VALVE LONG PATTERN, ASTM A216 GR. WCB, FB, CONSTRUCTION AS PER API 600, RAISED FACE FLANGED ENDS. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL GATE VALVE LONG PATTERN ASTM A216 GR WCB 4 GATE VALVE AB2A51-01 12 24 300# RF GA02A0B1 5 GATE VALVE AB2A51-01 8 24 300# RF GA02A0B3 CARBON STEEL, CONDUIT GATE VALVE , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE. GEAR OPERATOR CARBON STEEL, GATE VALVE LONG PATTERN, ASTM A216 GR. WCB, CONSTRUCTION AS PER API 600, FB, RAISED FACE FLANGED ENDS. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. ECP-VST-G-GEN-FT-001 604/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 6 GATE VALVE AB2A51-01 26 36 300# RF GA02A0B3 CARBON STEEL, CONDUIT GATE VALVE , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.47. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: THROUGH CONDUIT SLAB TYPE PIGGABLE, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE. GEAR OPERATOR 7 GLOBE VALVE AB2A51-01 3/4 1 1/2 300# RF GL04F0B2 8 GLOBE VALVE AB2A51-01 2 6 300# RF GL02A0B2 CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A-105, ALL APLICABLE POINTS AS FOR BS 1873, SOCKET WELDING ENDS AS PER ASME B16.11, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. GEAR OPERATOR CARBON STEEL, GLOBE VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER BS 1873/API 602, RB, RAISED FACE FLANGED ENDS AS PER ASME B16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL 9 GLOBE VALVE AB2A51-01 8 16 300# RF GL02A0B2 10 CHECK VALVE AB2A51-01 3/4 24 300# RF CK02A0B1 CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.5. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: API 602 + 6MM CORROSION ALLOWANCE / API 6D CARBON STEEL, GLOBE VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER BS 1873, RB, RAISED FACE FLANGED ENDS AS PER ASME B16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. ECP-VST-G-GEN-FT-001 605/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 11 CHECK VALVE AB2A51-01 26 36 300# RF CK02A0B1 CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, RAISED FACE FLANGED ENDS AS PER ASME 16.47. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304-GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: API 602 + 6MM CORROSION ALLOWANCE / API 6D 12 PIPE AB2A51-01 1/2 1 1/2 PE XXS T-01 13 PIPE AB2A51-01 2 2 BE 160 T-01 14 PIPE AB2A51-01 3 3 BE 160 T-01 15 PIPE AB2A51-01 4 4 BE 120 T-01 16 PIPE AB2A51-01 6 12 BE XS T-01 17 PIPE AB2A51-01 14 22 BE 60 T-01 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS 36 10 S S 16 2 O O CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.11, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X42, DIMENSIONS AS PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" 18 PIPE AB2A51-01 24 24 BE 40 T-01 19 PIPE AB2A51-01 26 28 BE API 0,750 T-01 20 PIPE AB2A51-01 30 30 BE API 0,812 T-01 21 PIPE AB2A51-01 36 36 BE API 0,875 T-01 22 PIPE AB2A51-01 42 42 BE API 1,000 T-01 23 45 DEGREES INDUCTION BEND R= 6D AB2A51-01 6 42 ACCORDING TO PIPE SCHEDULE PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W., API 5L GR. X42, DIMENSIONS AS PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.F.W. INDUCTION BEND 90 DEGREES, API 5L GR. X42, DIMENSIONS AS PER B16.9, BEVELED ENDS AS PER B16.25. CARBON STEEL, D.S.A.W., API 5L GR. X42, DIMENSIONS AS PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W., API 5L GR. X42, DIMENSIONS AS PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W., API 5L GR. X42, DIMENSIONS AS PER B36.10, BEVELED ENDS AS PER B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 606/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 24 90 DEGREES INDUCTION BEND R= 6D AB2A51-01 6 42 ACCORDING TO PIPE SCHEDULE 25 ELBOW 45 DEGREES AB2A51-01 1/2 1 1/2 6000# SW A-02 CARBON STEEL, E.F.W. INDUCTION BEND 90 DEGREES, API 5L GR. X42, DIMENSIONS AS PER B16.9, BEVELED ENDS AS PER B16.25. CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR. 26 ELBOW 45 DEGREES AB2A51-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 27 ELBOW 45 DEGREES AB2A51-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 28 ELBOW 90 DEGREES AB2A51-01 1/2 1 1/2 SW ACCORDING TO PIPE SCHEDULE A-03 29 ELBOW 90 DEGREES AB2A51-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-03 30 ELBOW 90 DEGREES AB2A51-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 2 20 1/2 1 1/2 A-0331 OLET AB2A51-01 6000# BW x SW CARBON STEEL, SOCKOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 3 42 1 24 33 EQUAL TEE AB2A51-01 3/4 1 1/2 6000# SW A-01 34 EQUAL TEE AB2A51-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 35 EQUAL TEE AB2A51-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 36 EQUAL TEE AB2A51-01 8 36 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 32 OLET END AS PER ASME B16.25 A-03AB2A51-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDOLET, ASTM A 694 F42, DIMENSIONS AS PER MSS-SP-97, BEVELED END AS PER ASME B16.25 CARBON STEEL, EQUAL TEE, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B 16.25 CARBON STEEL, EQUAL TEE, MSS SP-75 WPHY42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B 16.25 CARBON STEEL, EQUAL TEE, MSS SP-75 WPHY42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B 16.25. BARRED TEE. ECP-VST-G-GEN-FT-001 607/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 1 2 3/4 1 1/2 3 36 2 30 A-03 A-03 REDUCER TEE AB2A51-01 BW x BW ACCORDING TO PIPE SCHEDULE38 37 REDUCER TEE AB2A51-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, REDUCER TEE, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25, BARRED TEE. 4 42 2 30 1 2 3/4 1 1/2 3 42 2 30 42 CAP AB2A51-01 3/4 1 1/2 SW ACCORDING TO PIPE SCHEDULE A-01 43 CAP AB2A51-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-01 44 CAP AB2A51-01 3 42 BW ACCORDING TO PIPE SCHEDULE A-03 A-0341 CONCENTRIC REDUCER AB2A51-01 BW x BW ACCORDING TO PIPE SCHEDULE 40 CONCENTRIC REDUCER AB2A51-01 ACCORDING TO PIPE SCHEDULE A-02 AB2A51-01 A-03 BW x BW ACCORDING TO PIPE SCHEDULE 39 REDUCER TEE BW x BW CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B 16.9. BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY42, DIMENSIONS AS PER ASME B 16.9. BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 42, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 45 FLANGE AB2A51-01 1/2 1 1/2 300# RF ACCORDING TO PIPE SCHEDULE B-01 46 FLANGE AB2A51-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE B-02 47 FLANGE AB2A51-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE B-04 48 FLANGE AB2A51-01 26 42 300# RF ACCORDING TO PIPE SCHEDULE B-04 49 FLANGE AB2A51-01 6 8 300# BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, SOCKET WELDING FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.47, RAISED FACE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, SPECIAL DESIGN, CALCULATED FOR TO RESIST 50 TONS OF THRUST FORCE CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE ECP-VST-G-GEN-FT-001 608/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 50 FLANGE AB2A51-01 8 8 300# BW x BW ACCORDING TO PIPE SCHEDULE 51 FLANGE AB2A51-01 8 8 300# BW x BW ACCORDING TO PIPE SCHEDULE 52 FLANGE AB2A51-01 16 16 300# BW x BW ACCORDING TO CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, SPECIAL DESIGN, CALCULATED FOR TO RESIST 25 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, SPECIAL CARBON STEEL, ANCHOR FLANGE, ASTM A694 F42, SPECIAL DESIGN, CALCULATED FOR TO RESIST 80 TONS OF THRUST FORCE 52 FLANGE AB2A51-01 16 16 300# BW x BW PIPE SCHEDULE 53 BLIND FLANGE AB2A51-01 1/2 2 300# RF B-03 54 BLIND FLANGE AB2A51-01 3 24 300# RF B-05 55 BLIND FLANGE AB2A51-01 26 42 300# RF B-05 56 ORIFICE FLANGE AB2A51-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE 57 ORIFICE FLANGE AB2A51-01 3 24 300# RF ACCORDING TO PIPE SCHEDULE 58 PADDLE BLIND AB2A51-01 14 30 300# RF DESIGN, CALCULATED FOR TO RESIST 170 TONS OF THRUST FORCE CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE CARBON STEEL, BLIND FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.47, RAISED FACE CARBON STEEL, COUPLE ORIFICE WELDING NECK FLANGE, ASTM A105, 1/2" THREADED-TAP, DIMENSIONS AS PER ASME B16.36, RAISED FACE FLANGED ENDS CARBON STEEL, COUPLE ORIFICE WELDING NECK FLANGE, ASTM A694 F65, 1/2" THREADED-TAP, DIMENSIONS AS PER ASME B16.36, RAISED FACE FLANGED ENDS CARBON STEEL, BLIND FLANGE, ASTM A694 F42, DIMENSIONS AS PER ASME B16.5, RAISED FACE CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS; WAFER JOINT TYPE 59 SPACER RING AB2A51-01 14 30 300# RF 60 FIGURE 8 AB2A51-01 1/2 12 300# RF 61 GASKET AB2A51-01 1/2 42 300# E-01 62 INSULATION KIT AB2A51-01 1 42 300# CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE GO S S 193 G / S 19 G 2 CARBON STEEL, SPACER RING, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS; WAFER JOINT TYPE CARBON STEEL, SPECTACLE BLIND FIGURE 8S, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE, WAFER JOINT TYPE STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5; OUTER RING INSULATION KIT, GAKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD 63 BOLTING AB2A51-01 P-01 HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 609/761 Elaborado 25/03/11 CLASS 1500 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 3270 API 5L GR. X65 PSL 2 DATE: 09-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 300 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 3705 ASOCIATED GAS ASG 200 3395 300 3270 400 3170 500 3015 600 2840 650 2745 700 2665 750 2535 800 2055 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB5B31-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A694 F65 / ASTM A234 GR. WPB / ASTM MSS SP-75 WPHY 65 / ASTM A216 GR. WCB / ASTM A516 GR. 70 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 610/761 Elaborado 25/03/11 CLASS 1500 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 3270 API 5L GR. X65 PSL 2 DATE: 09-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 300 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB5B31-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A694 F65 / ASTM A234 GR. WPB / ASTM MSS SP-75 WPHY 65 / ASTM A216 GR. WCB / ASTM A516 GR. 70 ECP-VST-G-GEN-FT-001 611/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB5B31-01 1/2 1 1/2 1500# SW GA06B0B2 2 GATE VALVE AB5B31-01 2 3 1500# RJ GA06B0B1 COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE REDUCER PORT FEMALE ENDS, ASTM A105, CONSTRUCTION AS PER API 602, SOCKET WELDING ENDS AS PER ASME 16.11. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS CARBON STEEL, GATE VALVE LONG PATTERN, FB, ASTM A216 GR. WCB, CONSTRUCTION AS PER API 600, RING JOINT FLANGED ENDS. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS 3 GATE VALVE AB5B31-01 4 20 1500# RJ GA06B0B1 4 GATE VALVE AB5B31-01 24 24 1500# RJ GA06B0B1 5 GATE VALVE AB5B31-01 4 20 1500# RJ GA06B0B3 COMMENT: API 598 TESTS CARBON STEEL, GATE VALVE LONG PATTERN, FB, ASTM A216 GR. WCB, CONSTRUCTION AS PER API 600, RING JOINT FLANGED ENDS. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET BOLTED STUD BOLTS STUD A193/B7 NUTS A194/2H GASKET CARBON STEEL, GATE VALVE LONG PATTERN, FB, ASTM A216 GR. WCB, CONSTRUCTION AS PER API 600, RING JOINT FLANGED ENDS. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, GEAR OPERATOR 6 GATE VALVE AB5B31-01 24 24 1500# RJ GA06B0B3 7 GLOBE VALVE AB5B31-01 1/2 1 1/2 1500# SW GL06F0B2 8 GLOBE VALVE AB5B31-01 2 2 1500# RJ GL06B0B2 CARBON STEEL, GLOBE VALVE LONG PATTERN , RB, ASTM A216 GR. WCB, CONSTRUCTION AS PER API 602, RING JOINT FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, GEAR OPERATOR CARBON STEEL, GLOBE VALVE REDUCER PORT FEMALE ENDS , ASTM A105, CONSTRUCTION AS PER API 602, SOCKET WELDING ENDS AS PER ASME 16.11. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. ECP-VST-G-GEN-FT-001 612/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 9 GLOBE VALVE AB5B31-01 3 4 1500# RJ GL06B0B2 10 GLOBE VALVE AB5B31-01 6 16 1500# RJ GL06B0B2 CARBON STEEL, GLOBE VALVE LONG PATTERN , RB, ASTM A216 GR. WCB, CONSTRUCTION AS PER API 602, RING JOINT FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, RB, ALL APPLICABLE POINTS AS FOR BS 1873, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N 8) STEM: O S & Y PACKING: FLEXIBLE GRAPHITE OPERATION: GEAR 11 CHECK VALVE AB5B31-01 2 24 1500# RJ CK06B0B1 12 BALL VALVE AB5B31-01 3 16 1500# RJ BA06B0I1J 13 PIPE AB5B31-01 1/2 1 1/2 PE XXS T-01 14 PIPE AB5B31-01 2 2 BE XXS T-01 (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, FB, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SOFT IRON OVAL RING, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 602/ API 6D, RING JOINT FACE FLANGED END CARBON STEEL, BALL VALVE LP FB, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR ASME B16.34/API 6D, RING JOINT FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON ED, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS. CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.25 15 PIPE AB5B31-01 3 3 BE 160 T-04 16 PIPE AB5B31-01 4 8 BE 120 T-04 17 PIPE AB5B31-01 10 24 BE 100 T-04 18 NIPPLE AB5B31-01 1/2 1 1/2 PE SXXS T-01 19 NIPPLE AB5B31-01 1/2 1 1/2 PE SXXS T-01 20 ELBOW 45 DEGREES AB5B31-01 1/2 1 1/2 9000# SW A-01 21 ELBOW 90 DEGREES AB5B31-01 1/2 1 1/2 9000# SW A-01 CARBON STEEL, SEAMLESS API 5L GR. X65 PSL2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.25 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END , FOR L = 100 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END , FOR L = 200 mm CARBON STEEL, ELBOW 45 DEGREES FEMALE ENDS, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES FEMALE ENDS, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, SEAMLESS API 5L GR. X65 PSL2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.25 CARBON STEEL, SEAMLESS API 5L GR. X65 PSL2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 613/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 22 ELBOW 45 DEGREES AB5B31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 23 ELBOW 45 DEGREES AB5B31-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 24 ELBOW 90 DEGREES AB5B31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 25 ELBOW 90 DEGREES AB5B31-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 PIPE SCHEDULE 3 24 1/2 1 1/2 6 24 2 12 28 STRAIGHT TEE AB5B31-01 1/2 1 1/2 9000# SW A-01 3/4 1 1/2 1/2 1 1/2 30 STRAIGHT TEE AB5B31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 31 STRAIGHT TEE AB5B31-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 32 STRAIGHT BARRED TEE AB5B31-01 8 24 BW ACCORDING TO PIPE SCHEDULE A-03 A-03 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 26 OLET AB5B31-01 9000# BW x SW , CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP-97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A 694 F65, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 ACCORDING TO PIPE SCHEDULE 9000# SW x SW BW X BWOLET REDUCER TEE AB5B31-01 AB5B31-01 29 27 A-03 A-01 3 24 2 20 3 24 2 20 35 COUPLING AB5B31-01 1 1 1/2 9000# SW A-01 2 2 1/2 1 1/2 3/4 1 1/2 1/2 1 3 24 2 22 3 24 2 22 40 UNION AB5B31-01 1/2 1 1/2 9000# SW CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11. SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CONCENTRIC SWAGE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, PLAIN END CARBON STEEL, CONCENTRIC REDUCER NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKET WELDING ENDS AS PER ASME 16.11 BW x BW ACCORDING TO PIPE SCHEDULE AB5B31-01 AB5B31-01 BW x BW 33 REDUCER TEE AB5B31-01 A-03 A-03 BW x BW ACCORDING TO PIPE SCHEDULE PE x PE CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B 16.9. BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B 16.9. BEVELED ENDS AS PER ASME B16.25 A-03 A-03 A-02 CONCENTRIC REDUCER BW x BW ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULEBW x PE A-02 REDUCER BARRED TEE 36 CONCENTRIC REDUCER 34 AB5B31-01 ACCORDING TO PIPE SCHEDULE 39 ECCENTRIC REDUCER AB5B31-01 37 CONCENTRIC REDUCER AB5B31-0138 ECP-VST-G-GEN-FT-001 614/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 41 CAP AB5B31-01 1/2 1 1/2 9000# SW A-01 42 CAP AB5B31-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 43 CAP AB5B31-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 44 FLANGE AB5B31-01 1/2 1 1/2 1500# RJ ACCORDING TO PIPE SCHEDULE B-01 45 FLANGE AB5B31-01 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE B-02 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS CARBON STEEL, CAP, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.11. CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.11. CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END 46 FLANGE AB5B31-01 3 24 1500# RJ ACCORDING TO PIPE SCHEDULE B-04 47 BLIND FLANGE AB5B31-01 1/2 2 1500# RJ B-03 48 BLIND FLANGE AB5B31-01 3 24 1500# RJ B-05 49 ORIFICE FLANGE AB5B31-01 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE 50 ORIFICE FLANGE AB5B31-01 3 24 1500# RJ ACCORDING TO PIPE SCHEDULE 51 PADDLE BLIND AB5B31-01 12 12 1500# RJ 52 SPACER RING AB5B31 01 12 12 1500# RJ CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A694 F65, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H, RING JOINT FACE FLANGED END CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RING JOINT FACE FLANGED END 52 SPACER RING AB5B31-01 12 12 1500# RJ 53 FIGURE 8 AB5B31-01 1/2 12 1500# RJ 54 GASKET AB5B31-01 1/2 24 1500# RJ E-03 55 INSULATION KIT AB5B31-01 1 24 1500# E-04 56 BOLTING AB5B31-01 P-01 OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT FACE ENDS INSULATION KIT, GAKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE ECP-VST-G-GEN-FT-001 615/761 Elaborado 25/03/11 CLASS 600 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 1280 API 5L GR. X65 PSL2 DATE: 10-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 1480 TREATED WATER TWA 200 1360 300 1310 400 1265 500 1205 600 1135 650 1100 700 1060 750 1015 800 825 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 AB3A52-01 FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/4" RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / MSS SP-75 WPHY 65 / ASTM A694 F65 / ASTM A516 GR. 70 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 616/761 Elaborado 25/03/11 CLASS 600 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 1280 API 5L GR. X65 PSL2 DATE: 10-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 AB3A52-01 FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/4" RF ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / MSS SP-75 WPHY 65 / ASTM A694 F65 / ASTM A516 GR. 70 ECP-VST-G-GEN-FT-001 617/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB3A52-01 3/4 6 600# RF GA03A0B1 2 GATE VALVE AB3A52 01 8 36 600# RF GA03A0B1 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, TESTS AS PER API 598 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600 / API 6D, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 2 GATE VALVE AB3A52-01 8 36 600# RF GA03A0B1 3 CHECK VALVE AB3A52-01 3/4 36 600# RF CK03A0B1 4 GLOBE VALVE AB3A52-01 3/4 4 600# RF GL03A0B2 BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7 NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, TESTS AS PER API 598 CARBON STEEL, SWING CHECK VALVE, FB, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 602 / API 6D, TESTS AS PER API 598, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. SS304 GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 602 + 6MM CORROSION / API 6D CARBON STEEL, GLOBE VALVE LP, ASTM A-216 GR. WCB, RB, ALL APPLICABLE POINTS AS FOR API 602, RAISED FACE FLANGED ENDS, TESTS AS PER API 598, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RAISED FACE FLANGED ENDS, TEST AS PER API 598, 5 GLOBE VALVE AB3A52-01 6 16 600# RF GL03A0B2 6 PIPE AB3A52-01 1/2 1 1/2 PE XXS T-01 7 PIPE AB3A52-01 2 2 BE XXS T-01 8 PIPE AB3A52-01 3 3 BE 160 T-04 9 PIPE AB3A52-01 4 4 BE 120 T-04 10 PIPE AB3A52-01 6 10 BE 80 T-04 BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 -GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 10 PIPE AB3A52-01 6 10 BE 80 T-04B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 618/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 11 PIPE AB3A52-01 12 24 BE 60 T-04 12 PIPE AB3A52-01 26 28 BE API 0,812 T-04 13 PIPE AB3A52-01 30 30 BE API 0,875 T-04 CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 14 PIPE AB3A52-01 36 36 BE API 1,000 T-04 15 ELBOW 45 DEGREES AB3A52-01 3/4 1 1/2 6000# SW ACCORDING TO PIPE SCHEDULE A-01 16 ELBOW 45 DEGREES AB3A52-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 17 ELBOW 45 DEGREES AB3A52-01 3 36 BW ACCORDING TO PIPE SCHEDULE A-03 18 ELBOW 90 DEGREES AB3A52-01 3/4 1 1/2 6000# SW A-01 ACCORDING TO B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT 2 CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL ELBOW 90 DEGREES LONG RADIUS ASTM A 234 GR WPB CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 19 ELBOW 90 DEGREES AB3A52-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 20 ELBOW 90 DEGREES AB3A52-01 3 36 BW ACCORDING TO PIPE SCHEDULE A-03 1 2 3/4 1 1/2 3 36 2 30 3 36 2 30 24 CAP AB3A52-01 1/2 1 1/2 6000# SW A-01 ACCORDING TO A-02 A-03 21 CONCENTRIC REDUCER AB3A52-01 BW x BW ACCORDING TO PIPE SCHEDULE 22 CONCENTRIC REDUCER AB3A52-01 BW x BW ACCORDING TO PIPE SCHEDULE 23 ECCENTRIC REDUCER AB3A52-01 A-03BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL CAP ASTM A 234 GR WPB DIMENSIONS AS PER ASME B16 9 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 25 CAP AB3A52-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 26 CAP AB3A52-01 3 36 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 619/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 27 STRAIGHT TEE AB3A52-01 3/4 1 1/2 6000# SW A-01 28 STRAIGHT TEE AB3A52-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 29 STRAIGHT TEE AB3A52-01 3 36 BW ACCORDING TO PIPE SCHEDULE A-03 3/4 1 1/2 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL REDUCER TEE FEMALE ASTM A 105 DIMENSIONS AS PER ASME CARBON STEEL, STRAIGHT TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 3/4 1 1/2 1/2 1 1/2 2 2 1 1/2 1 1/2 3 36 2 30 2 36 1/2 1 1/2 6 36 2 16 35 FLANGE AB3A52-01 3/4 1 1/2 600# RF ACCORDING TO PIPE SCHEDULE B-02 36 FLANGE AB3A52-01 2 2 600# RF ACCORDING TO PIPE SCHEDULE B-04 A-03 BW x BW ACCORDING TO PIEP SCHEDULE A-02 BW x BW ACCORDING TO PIPE SCHEDULE32 REDUCER TEE AB3A52-01 31 REDUCER TEE AB3A52-01 A-0334 OLET AB3A52-01 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDOLET, ASTM A 694 F65, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, WELDING NECK FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, REDUCER TEE, ASTM A 234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 33 OLET AB3A52-01 6000# BW x SW CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, REDUCER TEE FEMALE, ASTM A-105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.116000# SW x SW A-01 CARBON STEEL, SOCKOLET, ASTM A 694 F65, DIMENSIONS AS PER MSS-SP-97, BEVELED END AS PER ASME B16.25, SOCKET WELDING END AS PER ASME B16.11 A-03 30 REDUCER TEE AB3A52-01 37 FLANGE AB3A52-01 3 24 600# RF ACCORDING TO PIPE SCHEDULE B-04 38 FLANGE AB3A52-01 26 36 600# RF ACCORDING TO PIPE SCHEDULE B-04 39 FLANGE AB3A52-01 6 6 600# BW x BW ACCORDING TO PIPE SCHEDULE 40 BLIND FLANGE AB3A52-01 1/2 2 600# RF B-03 41 BLIND FLANGE AB3A52-01 3 24 600# RF B-05 42 BLIND FLANGE AB3A52-01 26 36 600# RF B-05 CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 55 TONS OF THRUST FORCE CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.47 SERIE B, RAISED FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE) ASTM A105 DIMENSIONS AS PER ASME CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 43 ORIFICE FLANGE AB3A52-01 2 2 600# RF ACCORDING TO PIPE SCHEDULE NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 620/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 44 ORIFICE FLANGE AB3A52-01 3 24 600# RF ACCORDING TO PIPE SCHEDULE 45 PADDLE BLIND AB3A52-01 14 30 600# RF CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A694 F65, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H, RAISED FACE FLANGED END CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE CARBON STEEL SPACER RING ASTM A516 GR 70 DIMENSIONS AS PER ASME 46 SPACER RING AB3A52-01 14 30 600# RF 47 FIGURE 8 AB3A52-01 1/2 12 600# RF 48 GASKET AB3A52-01 1/2 36 600# RF E-01 49 INSULATION KIT AB3A52-01 1 36 600# E-04 50 BOLTING AB3A52-01 P-01 CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 / ASME B16.47; OUTER RING INSULATION KIT, GASKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RAISED FACE ENDS, WAFER JOINT TYPE ECP-VST-G-GEN-FT-001 621/761 Elaborado 25/03/11 CLASS 1500 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 3470 API 5L GR. X65 PSL 2 DATE: 09-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 3705 INJECTION WATER INW 200 3395 300 3270 400 3170 500 3015 600 2840 650 2745 700 2665 750 2535 800 2055 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB5B32-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A216 GR. WCB / ASTM A234 GR. WPB / ASTM A516 GRADE 70 / ASTM A694 F65. NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- NO DESTRUCTIVE EXAMINATION 20 % X-RAY 3.- POST WELDING HEAT TREATMENT FOR THICKNESS > 19 mm ECP-VST-G-GEN-FT-001 622/761 Elaborado 25/03/11 CLASS 1500 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 3470 API 5L GR. X65 PSL 2 DATE: 09-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB5B32-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A216 GR. WCB / ASTM A234 GR. WPB / ASTM A516 GRADE 70 / ASTM A694 F65. ECP-VST-G-GEN-FT-001 623/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB5B32-01 1/2 1 1/2 1500# SW GA06B0B2 2 GATE VALVE AB5B32-01 2 3 1500# RJ GA06B0B1 GATE VALVE LP, ASTM A216 GR. WCB, FLG 1500 LB, RJ, FB, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS; ACCORDING TO API CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 GATE VALVE RP FEMALE ENDS RB, ASTM A105, SW, 1500 LB, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, ACC. TO API 602 COMPONENTS DESCRIPTION Versión 1 3 GATE VALVE AB5B32-01 4 20 1500# RJ GA06B0B1 4 GATE VALVE AB5B32-01 24 24 1500# RJ GA06B0B1 5 GATE VALVE AB5B32-01 4 20 1500# RJ GA06B0B3 6 GATE VALVE AB5B32-01 24 24 1500# RJ GA06B0B3 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: , , ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, GEAR OPERATOR 7 GLOBE VALVE AB5B32-01 1/2 1 1/2 1500# SW GL06F0B2 8 GLOBE VALVE AB5B32-01 2 2 1500# RJ GL06B0B2 9 GLOBE VALVE AB5B32-01 3 16 1500# RJ GL06B0B2 10 CHECK VALVE AB5B32-01 2 24 1500# RJ CK06B0B1 ( ) FLEXIBLE GRAPHITE, GEAR OPERATOR CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A105, ALL APPLICABLE POINTS AS FOR API 602, SOCKET WELDING FACE ENDS,BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, RB, ALL APPLICABLE POINTS AS FOR API 602, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, RB, ALL APPLICABLE POINTS AS FOR BS 1873, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, FB, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SOFT IRON OVAL RING, DISC: SWING TYPE, SEAT: U S 9 / , G S SO O O G, SC S G , S RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 602/ API 6D, RING JOINT FACE FLANGED END ECP-VST-G-GEN-FT-001 624/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 COMPONENTS DESCRIPTION Versión 1 11 BALL VALVE AB5B32-01 3 16 1500# RJ BA06B0I1J 12 PIPE AB5B32-01 1/2 1 1/2 PE XXS T-01 13 PIPE AB5B32-01 2 2 BE XXS T-01 CARBON STEEL, BALL VALVE LP FB, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR ASME B16.34/API 6D, RING JOINT FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON ED, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER 14 PIPE AB5B32-01 3 3 BE 160 T-04 15 PIPE AB5B32-01 4 8 BE 120 T-04 16 PIPE AB5B32-01 10 24 BE 100 T-04 17 NIPPLE AB5B32-01 1/2 1 1/2 PE S-XXS T-01 18 NIPPLE AB5B32-01 1/2 1 1/2 PE S-XXS T-01 19 ELBOW 45 DEGREES AB5B32-01 1/2 1 1/2 9000# SW A-01 20 ELBOW 90 DEGREES AB5B32-01 1/2 1 1/2 9000# SW A-01 21 ELBOW 45 DEGREES AB5B32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, SEAMLESS PIPE NIPPLE, ASTM A106 GR.B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L= 100mm CARBON STEEL, SEAMLESS PIPE NIPPLE, ASTM A106 GR.B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L= 200mm CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16 9 BEVELED ENDS AS PER ASME B16 25 CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 21 ELBOW 45 DEGREES AB5B32-01 2 2 BW PIPE SCHEDULE A-02 22 ELBOW 45 DEGREES AB5B32-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 23 ELBOW 90 DEGREES AB5B32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 24 ELBOW 90 DEGREES AB5B32-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 3 24 1/2 1 1/2 6 24 2 12 27 STRAIGHT TEE AB5B32-01 1/2 1 1/2 9000# SW A-01 3/4 1 1/2 1/2 1 1/2 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP- 97, BEVELED END AS PER ASME B16.25, SOCKETWELD END AS PER ASME B16.11 CARBON STEEL, WELDOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP- 97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 AB5B32-01 OLET A-03 BW X SW A-03 ACCORDING TO PIPE SCHEDULE A-0128 REDUCER TEE 9000# BW X BW SW X SWAB5B32-01 25 OLET 9000# AB5B32-0126 ECP-VST-G-GEN-FT-001 625/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 COMPONENTS DESCRIPTION Versión 1 29 STRAIGHT TEE AB5B32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 p STRAIGHT TEE AB5B32-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 31 STRAIGHT BARRED TEE AB5B32-01 8 24 BW ACCORDING TO PIPE SCHEDULE A-03 3 24 2 20 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 32 REDUCER TEE BW X BWAB5B32-01 ACCORDING TO PIPE SCHEDULE A-03 3 24 2 20 34 COUPLING AB5B32-01 1 1 1/2 9000# SW A-01 2 2 1/2 1 1/2 3/4 1 1/2 1/2 1 3 24 2 22 3 24 2 22 39 UNION AB5B32-01 1/2 1 1/2 9000# SW CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, PLAIN END CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR.WPB, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKETWELD ENDS AS PER ASME B16.11 REDUCER BARRED TEE BW X BWAB5B32-0133 BW X PE ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE A-03 A-02 CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 A-02 A-03 A-03 CONCENTRIC REDUCER 37 CONCENTRIC REDUCER ACCORDING TO PIPE SCHEDULE BW X BW ACCORDING TO PIPE SCHEDULE BW X BW ACCORDING TO PIPE SCHEDULE AB5B32-01 PE X PEAB5B32-01 AB5B32-01 AB5B32-01 38 ECCENTRIC REDUCER 35 CONCENTRIC REDUCER 36 40 CAP AB5B32-01 1/2 1 1/2 9000# SW A-01 41 CAP AB5B32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 42 CAP AB5B32-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 43 FLANGE AB5B32-01 1/2 1 1/2 1500# RJ ACCORDING TO PIPE SCHEDULE B-01 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END ECP-VST-G-GEN-FT-001 626/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 COMPONENTS DESCRIPTION Versión 1 44 FLANGE AB5B32-01 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE B-02 45 FLANGE AB5B32-01 3 24 1500# RJ ACCORDING TO PIPE SCHEDULE B-04 46 FLANGE AB5B32-01 6 8 1500# BW X BW ACCORDING TO PIPE SCHEDULE 47 FLANGE AB5B32-01 8 8 1500# BW X BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 50 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 25 TONS OF THRUST FORCE CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END 48 FLANGE AB5B32-01 8 8 1500# BW X BW ACCORDING TO PIPE SCHEDULE 49 BLIND FLANGE AB5B32-01 1/2 2 1500# RJ B-03 50 BLIND FLANGE AB5B32-01 3 24 1500# RJ B-05 51 ORIFICE FLANGE AB5B32-01 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE 52 ORIFICE FLANGE AB5B32-01 3 24 1500# RJ ACCORDING TO PIPE SCHEDULE 53 PADDLE BLIND AB5B32-01 12 12 1500# RJ CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A694 F65, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H, RING JOINT FACE FLANGED END CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 80 TONS OF THRUST FORCE CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RING JOINT FACE FLANGED END 54 SPACER RING AB5B32-01 12 12 1500# RJ 55 FIGURE 8 AB5B32-01 1/2 12 1500# RJ 56 GASKET AB5B32-01 1/2 24 1500# RJ E-03 57 INSULATION KIT AB5B32-01 1 24 1500# E-04 58 BOLTING AB5B32-01 P-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT FACE ENDS INSULATION KIT, GAKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD ECP-VST-G-GEN-FT-001 627/761 Elaborado 25/03/11 CLASS 1500 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 3470 API 5L GR. X65 PSL 2 DATE: 08-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 3705 TREATED WATER TWA PWHT FOR THK > 19 mm 200 3395 20 % X-RAY 300 3270 400 3170 500 3015 600 2840 650 2745 700 2665 750 2535 800 2055 CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES AB5B33-01 FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/8" RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / MSS SP-75 WPHY 65 / ASTM A694 F65 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 628/761 Elaborado 25/03/11 CLASS 1500 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 1 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 3470 API 5L GR. X65 PSL 2 DATE: 08-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES AB5B33-01 FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/8" RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / MSS SP-75 WPHY 65 / ASTM A694 F65 ECP-VST-G-GEN-FT-001 629/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB5B33-01 1/2 1 1/2 1500# SW GA06B0B2 2 GATE VALVE AB5B33-01 2 3 1500# RJ GA06B0B1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, COMPONENTS DESCRIPTION 3 GATE VALVE AB5B33-01 4 20 1500# RJ GA06B0B1 4 GATE VALVE AB5B33-01 24 24 1500# RJ GA06B0B1 5 GATE VALVE AB5B33-01 4 20 1500# RJ GA06B0B3 PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, GEAR OPERATOR 6 GATE VALVE AB5B33-01 24 24 1500# RJ GA06B0B3 7 CHECK VALVE AB5B33-01 2 24 1500# RJ CK06B0B1 8 GLOBE VALVE AB5B33-01 1/2 1 1/2 1500# SW GL06F0B2 CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A105, ALL APPLICABLE POINTS AS FOR API 602, SOCKET WELDING FACE ENDS,BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, RB, ALL APPLICABLE POINTS AS FOR API 602 RING JOINT FACE FLANGED ENDS C O S , CO U G , S 6 G C , ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, GEAR OPERATOR CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, FB, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SOFT IRON OVAL RING, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 602/ API 6D, RING JOINT FACE FLANGED END 9 GLOBE VALVE AB5B33-01 2 2 1500# RJ GL06B0B2 APPLICABLE POINTS AS FOR API 602, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. ECP-VST-G-GEN-FT-001 630/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 10 GLOBE VALVE AB5B33-01 3 16 1500# RJ GL06B0B2 11 BALL VALVE AB5B33-01 3 16 1500# RJ BA06B0I1J CARBON STEEL, BALL VALVE LP FB, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR ASME B16.34/API 6D, RING JOINT FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON ED, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, RB, ALL APPLICABLE POINTS AS FOR BS 1873, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR 12 PIPE AB5B33-01 1/2 1 1/2 PE XXS T-01 13 PIPE AB5B33-01 2 2 BE XXS T-01 14 PIPE AB5B33-01 3 6 BE 160 T-04 15 PIPE AB5B33-01 8 8 BE XXS T-04 16 PIPE AB5B33-01 10 10 BE 160 T-04 17 PIPE AB5B33-01 12 12 BE 140 T-04 18 PIPE AB5B33-01 14 24 BE 160 T-04 CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, E.R.W. PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36 10 BEVELED ENDS AS PER ASME B16 25 DOUBLE RANDOM 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 18 PIPE AB5B33-01 14 24 BE 160 T-04 19 ELBOW 45 DEGREES AB5B33-01 1/2 1 1/2 9000# SW A-01 20 ELBOW 45 DEGREES AB5B33-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 21 ELBOW 45 DEGREES AB5B33-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 22 ELBOW 90 DEGREES AB5B33-01 1/2 1 1/2 9000# SW A-01 23 ELBOW 90 DEGREES AB5B33-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 24 ELBOW 90 DEGREES AB5B33-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 631/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 2 2 1/2 1 1/2 3/4 1 1/2 1/2 1 3 24 2 22 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, PLAIN END ACCORDING TO PIPE SCHEDULE 27 CONCENTRIC REDUCER AB5B33-01 A-02 BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR.WPB, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 BW x PE PE x PE ACCORDING TO PIPE SCHEDULE A-02 A-03 26 CONCENTRIC REDUCER AB5B33-01 25 CONCENTRIC REDUCER AB5B33-01 3 24 2 22 29 CAP AB5B33-01 1/2 1 1/2 9000# SW A-01 30 CAP AB5B33-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 31 CAP AB5B33-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 32 STRAIGHT TEE AB5B33-01 1/2 1 1/2 9000# SW A-01 33 STRAIGHT TEE AB5B33-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 34 STRAIGHT TEE AB5B33-01 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 35 STRAIGHT BARRED TEE AB5B33-01 8 24 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 28 ECCENTRIC REDUCER AB5B33-01 BW x BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 3/4 1 1/2 1/2 1 1/2 3 24 2 20 3 24 2 20 3 24 1/2 1 1/2 6 24 2 12 41 FLANGE AB5B33-01 1/2 1 1/2 1500# RJ ACCORDING TO PIPE SCHEDULE B-01 42 FLANGE AB5B33-01 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE B-02 43 FLANGE AB5B33-01 3 24 1500# RJ ACCORDING TO B-04 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 A-01SW x SW 40 OLET 38 REDUCER BARRED TEE AB5B33-01 39 OLET AB5B33-01 BW x BW ACCORDING TO PIPE SCHEDULE A-03 AB5B33-01 9000# CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP-97, BEVELED END AS PER ASME B16.25, SOCKETWELD END AS PER ASME B16.11 A-03BW x BW ACCORDING TO PIPE SCHEDULE A-03BW x BW ACCORDING TO PIPE SCHEDULE BW x SW A-03 CARBON STEEL, WELDOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP-97, BEVELED ENDS AS PER ASME B16.25 37 REDUCER TEE AB5B33-01 36 REDUCER TEE AB5B33-01 9000# 43 FLANGE AB5B33-01 3 24 1500# RJ PIPE SCHEDULE B-04 44 FLANGE AB5B33-01 6 8 1500# BW x BW ACCORDING TO PIPE SCHEDULE AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 50 TONS OF THRUST FORCE ECP-VST-G-GEN-FT-001 632/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 45 FLANGE AB5B33-01 8 8 1500# BW x BW ACCORDING TO PIPE SCHEDULE 46 FLANGE AB5B33-01 8 8 1500# BW x BW ACCORDING TO PIPE SCHEDULE 47 BLIND FLANGE AB5B33-01 1/2 2 1500# RJ B-03 48 BLIND FLANGE AB5B33 01 3 24 1500# RJ B 05 CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 25 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 80 TONS OF THRUST FORCE 48 BLIND FLANGE AB5B33-01 3 24 1500# RJ B-05 49 ORIFICE FLANGE AB5B33-01 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE 50 ORIFICE FLANGE AB5B33-01 3 24 1500# RJ ACCORDING TO PIPE SCHEDULE 51 UNION AB5B33-01 1/2 1 1/2 9000# SW 52 NIPPLE AB5B33-01 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 53 COUPLING AB5B33 01 1 1 1/2 9000# SW A 01 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RING JOINT FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A694 F65, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H, RING JOINT FACE FLANGED END CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, SEAMLESS PIPE NIPPLE, ASTM A106 GR.B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L= 100mm, 200mm 53 COUPLING AB5B33-01 1 1 1/2 9000# SW A-01 54 PADDLE BLIND AB5B33-01 12 12 1500# RJ 55 SPACER RING AB5B33-01 12 12 1500# RJ 56 FIGURE 8 AB5B33-01 1/2 12 1500# RJ 57 GASKET AB5B33-01 1/2 24 1500# RJ E-03 58 INSULATION KIT AB5B33-01 1 24 1500# E-04 59 BOLTING AB5B33-01 P-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT FACE ENDS INSULATION KIT, GASKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD ECP-VST-G-GEN-FT-001 633/761 Elaborado 25/03/11 CLASS 1500 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 3470 API 5L GR. X65 PSL 2 DATE: 11-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 300 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 3705 ASOCIATED GAS ASG 20 % X-RAY 200 3395 300 3270 400 3170 500 3015 600 2840 650 2745 700 2665 750 2535 800 2055 NOTES FLANGE FINISH ANSI RATING ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / MSS SP-75 WPHY 65 / ASTM A694 F65 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" RJ AB5B33-02 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 634/761 Elaborado 25/03/11 CLASS 1500 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 3470 API 5L GR. X65 PSL 2 DATE: 11-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 300 FLANGE FINISH ANSI RATING ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / MSS SP-75 WPHY 65 / ASTM A694 F65 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 CORROSION ALLOWANCE POR: 1/8" RJ AB5B33-02 ECP-VST-G-GEN-FT-001 635/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB5B33-02 1/2 1 1/2 1500# SW GA06B0B2 2 GATE VALVE AB5B33-02 2 3 1500# RJ GA06B0B1 COMPONENTS DESCRIPTION CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO API 602, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS. CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE OPERATION: HAND WHEEL COMMENT: API 598 TESTS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 3 GATE VALVE AB5B33-02 4 20 1500# RJ GA06B0B1 4 GATE VALVE AB5B33-02 24 24 1500# RJ GA06B0B1 5 GATE VALVE AB5B33-02 4 20 1500# RJ GA06B0B3 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TEST CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS. CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TEST 6 GATE VALVE AB5B33-02 24 24 1500# RJ GA06B0B3 7 CHECK VALVE AB5B33-02 2 24 1500# RJ CK06B0B1 8 GLOBE VALVE AB5B33-02 1/2 1 1/2 1500# SW GL06F0B2 CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, FB, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 602/API 6D, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SOFT IRON OVAL RING, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 602/ API 6D, RING JOINT FACE FLANGED END CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A105, ALL APPLICABLE POINTS AS FOR API 602, SOCKET WELDING FACE ENDS,BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. ECP-VST-G-GEN-FT-001 636/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 9 GLOBE VALVE AB5B33-02 2 2 1500# RJ GL06B0B2 10 GLOBE VALVE AB5B33-02 3 16 1500# RJ GL06B0B2 CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COEFFICIENT PA CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N 8) STEM: O S & Y PACKING: FLEXIBLE GRAPHITE 11 BALL VALVE AB5B33-02 3 16 1500# RJ BA06B0I1J 12 PIPE AB5B33-02 1/2 1 1/2 PE XXS T-01 13 PIPE AB5B33-02 2 2 BE XXS T-01 14 PIPE AB5B33-02 3 6 BE 160 T-04 15 PIPE AB5B33-02 8 8 BE XXS T-04 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, BALL VALVE LP FB, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR ASME B16.34/API 6D, RING JOINT FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON ED, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36 10 BEVELED ENDS AS PER ASME B16 25 DOUBLE RANDOM CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS 16 PIPE AB5B33-02 10 10 BE 160 T-04 17 PIPE AB5B33-02 12 12 BE 140 T-04 18 PIPE AB5B33-02 14 24 BE 160 T-04 19 ELBOW 45 DEGREES AB5B33-02 1/2 1 1/2 9000# SW A-01 20 ELBOW 45 DEGREES AB5B33-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 21 ELBOW 45 DEGREES AB5B33-02 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 22 ELBOW 90 DEGREES AB5B33-02 1/2 1 1/2 9000# SW A-01 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, D.S.A.W. PIPE, API 5L GR. X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16 11 23 ELBOW 90 DEGREES AB5B33-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 B16.11 ECP-VST-G-GEN-FT-001 637/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 24 ELBOW 90 DEGREES AB5B33-02 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 2 2 1/2 1 1/2 3/4 1 1/2 1/2 1 3 24 2 22 ACCORDING TO PIPE SCHEDULE A-03 AB5B33-02 25 CONCENTRIC REDUCER AB5B33-02 27 CONCENTRIC REDUCER AB5B33-02 26 CONCENTRIC REDUCER BW x BW BW x PE ACCORDING TO PIPE SCHEDULE A-02PE x PE CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR.WPB, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, PLAIN END A-02 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 3 24 2 22 29 CAP AB5B33-02 1/2 1 1/2 9000# SW A-01 30 CAP AB5B33-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 31 CAP AB5B33-02 3 24 BW A-03 32 STRAIGHT TEE AB5B33-02 1/2 1 1/2 9000# SW A-01 33 STRAIGHT TEE AB5B33-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 34 STRAIGHT TEE AB5B33-02 3 24 BW ACCORDING TO PIPE SCHEDULE A-03 35 STRAIGHT BARRED TEE AB5B33-02 8 24 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, STRAIGHT TEE, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 ECCENTRIC REDUCER AB5B33-02 BW x BW A-03ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE CARBON STEEL, STRAIGHT TEE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 3/4 1 1/2 1/2 1 1/2 3 24 2 20 3 24 2 20 3 24 1/2 1 1/2 6 24 2 12 41 FLANGE AB5B33-02 1/2 1 1/2 1500# RJ ACCORDING TO PIPE SCHEDULE B-01 42 FLANGE AB5B33-02 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE B-02 CARBON STEEL, SOCKOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP- 97, BEVELED END AS PER ASME B16.25, SOCKETWELD END AS PER ASME B16.11 ACCORDING TO PIPE SCHEDULE A-03 AB5B33-02 9000# BW x SW A-03 BW x BW 40 OLET AB5B33-02 CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END BW x BW ACCORDING TO PIPE SCHEDULE BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP- 97, BEVELED ENDS AS PER ASME B16.25 A-03 A-03 38 REDUCER BARRED TEE AB5B33-02 36 REDUCER TEE AB5B33-02 9000# 39 OLET 37 REDUCER TEE AB5B33-02 SW x SW A-01 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 BEVELED ENDS AS PER ASME B16.25 43 FLANGE AB5B33-02 3 24 1500# RJ ACCORDING TO PIPE SCHEDULE B-04 CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END ECP-VST-G-GEN-FT-001 638/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 44 FLANGE AB5B33-02 6 8 1500# BW x BW ACCORDING TO PIPE SCHEDULE 45 FLANGE AB5B33-02 8 8 1500# BW x BW ACCORDING TO PIPE SCHEDULE 46 FLANGE AB5B33-02 8 8 1500# BW x BW ACCORDING TO PIPE SCHEDULE 47 BLIND FLANGE AB5B33-02 1/2 2 1500# RJ B-03 CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 50 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 80 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 25 TONS OF THRUST FORCE 48 BLIND FLANGE AB5B33-02 3 24 1500# RJ B-05 49 ORIFICE FLANGE AB5B33-02 2 2 1500# RJ ACCORDING TO PIPE SCHEDULE 50 ORIFICE FLANGE AB5B33-02 3 24 1500# RJ ACCORDING TO PIPE SCHEDULE 51 UNION AB5B33-02 1/2 1 1/2 9000# SW 52 NIPPLE AB5B33-02 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 CARBON STEEL, SEAMLESS PIPE NIPPLE, ASTM A106 GR.B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L= 100mm, 200mm CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A694 F65, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H, RING JOINT FACE FLANGED END CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKETWELD ENDS AS PER ASME B16.11 INSULATION KIT, GASKET TYPE F WITH SEALS, INSULATION WASHERS, 53 INSULATION KIT AB5B33-02 1 24 1500# E-04 54 COUPLING AB5B33-02 1 1 1/2 9000# SW A-01 55 FIGURE 8 AB5B33-02 1/2 12 1500# RJ 56 PADDLE BLIND AB5B33-02 12 12 1500# RJ 57 SPACER RING AB5B33-02 12 12 1500# RJ 58 GASKET AB5B33-02 1/2 24 1500# RJ E-03 59 BOLTING AB5B33-02 P-01 CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, PADDLE BLIND, ASTM A-516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, SPACER RING, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT FACE ENDS STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD ECP-VST-G-GEN-FT-001 639/761 Elaborado 25/03/11 CLASS 2500 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 5450 API 5L GR. X65 PSL 2 DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 300 DESIGN LIMITS Class Temperature 300# 600# 900# 1500# 2500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 6170 ASOCIATED GAS ASG 200 5655 300 5450 400 5280 500 5025 600 4730 650 4575 700 4425 750 4230 800 3430 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB6B31-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RJ ASTM A106 GR. B ONLY FOR PIPE 1" AND LESS / ASTM A105 / ASTM A216 GR. WCB / ASTM A234 GR. WPB / ASTM A516 GRADE 70 / ASTM A694 F65. NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 2.- NO DESTRUCTIVE EXAMINATION 20 % X-RAY ECP-VST-G-GEN-FT-001 640/761 Elaborado 25/03/11 CLASS 2500 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 5450 API 5L GR. X65 PSL 2 DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 300 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB6B31-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RJ ASTM A106 GR. B ONLY FOR PIPE 1" AND LESS / ASTM A105 / ASTM A216 GR. WCB / ASTM A234 GR. WPB / ASTM A516 GRADE 70 / ASTM A694 F65. ECP-VST-G-GEN-FT-001 641/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB6B31-01 1/2 1 2500# SW GA07F0B2 2 GATE VALVE AB6B31-01 2 12 2500# RJ GA07B0B1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION GATE VALVE RP FEMALE ENDS RB, ASTM A105, SW, 2500 LB, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS. ACC. TO ASME B16.34 CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: 3 GATE VALVE AB6B31-01 4 10 2500# RJ GA07B0B3 4 GLOBE VALVE AB6B31-01 1/2 1 2500# SW GL07F0B2 5 GLOBE VALVE AB6B31-01 2 10 2500# RJ GL07B0B2 RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE. GEAR OPERATOR GLOBE VALVE RP FEMALE ENDS RB, ASTM A105, SW, 2500 LB, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. ALL APLICABLE POINTS AS FOR ASME B16.34 CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, RB, ALL APPLICABLE POINTS AS FOR BS 1873, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR 6 CHECK VALVE AB6B31-01 1+1/2 12 2500# RJ CK07B0B1 7 BALL VALVE AB6B31-01 2 12 2500# RJ BA07B0I1J CHECK VALVE SWING, ASTM A216 GR. WCB, FLG 2500 LB, RJ, FB, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SOFT IRON OVAL RING, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: ALL APPLICABLE POINTS AS FOR API 6D CARBON STEEL, BALL VALVE LP FB, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR ASME B16.34/API 6D, RING JOINT FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON ED, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. ECP-VST-G-GEN-FT-001 642/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 8 PIPE AB6B31-01 1/2 1 PE XXS T-01 9 PIPE AB6B31-01 1 1/2 1 1/2 PE XXS T-04 10 PIPE AB6B31-01 2 6 BE XXS T-04 11 PIPE AB6B31-01 8 12 BE 160 T-04 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 11 PIPE AB6B31 01 8 12 BE 160 T 04 12 NIPPLE AB6B31-01 1/2 1 PE S-XXS T-01 13 NIPPLE AB6B31-01 1/2 1 PE S-XXS T-01 14 ELBOW 45 DEGREES AB6B31-01 1/2 1 9000# SW A-01 15 ELBOW 90 DEGREES AB6B31-01 1/2 1 9000# SW A-01 16 ELBOW 45 DEGREES AB6B31-01 1+1/2 12 BW ACCORDING TO PIPE SCHEDULE A-03 17 ELBOW 90 DEGREES AB6B31-01 1+1/2 12 BW ACCORDING TO PIPE SCHEDULE A-03 18 STRAIGHT TEE AB6B31-01 1/2 1 9000# SW A-01 CARBON STEEL, SEAMLESS PIPE NIPPLE, ASTM A106 GR. B, PE, ASME B36.10, LENGTH = 200 MM CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE NIPPLE, ASTM A106 GR. B, PE, ASME B36.10, LENGTH = 100 MM 3/4 1 1/2 3/4 20 STRAIGHT TEE AB6B31-01 1+1/2 12 BW ACCORDING TO PIPE SCHEDULE A-03 21 STRAIGHT BARRED TEE AB6B31-01 2 12 BW ACCORDING TO PIPE SCHEDULE A-03 2 12 1+1/2 10 2 12 1+1/2 10 24 COUPLING AB6B31-01 1 1 9000# SW A-01 3/4 1 1/2 3/4 CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, PE X PE, DIMENSIONS AS PER MSS SP-95 , AB6B31-01 A-01 A-03 BW X BW BW X BW CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 REDUCER BARRED TEE 19 REDUCING TEE 9000# AB6B31-01 22 REDUCING TEE 23 ACCORDING TO PIPE SCHEDULE AB6B31-01 A-02 ACCORDING TO PIPE SCHEDULE A-03 PE X PE S-XXS SW X SW AB6B31-01 CONCENTRIC REDUCER25 ECP-VST-G-GEN-FT-001 643/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 2 12 1+1/2 10 2 12 1+1/2 10 3 12 1/2 1 1/2 8 12 27 28 OLET AB6B31-01 9000# BW x SW A-03 CARBON STEEL, SOCKOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP- 97, BEVELED END AS PER ASME B16.25, SOCKETWELD END AS PER ASME B16.11 A-03 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, BW X BW, ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECCENTRIC REDUCER AB6B31-01 BW X BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, BW X BW, ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, WELDOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP- 97 BEVELED ENDS AS PER ASME B16 25 AB6B31-0126 29 OLET AB6B31-01 CONCENTRIC REDUCER A-03 ACCORDING TO PIPE SCHEDULE A-03 ACCORDING TO PIPE SCHEDULE BW X BW BW x BW 2 4 30 UNION AB6B31-01 1/2 1 9000# SW A-01 31 CAP AB6B31-01 1/2 1 9000# SW A-01 32 CAP AB6B31-01 1+1/2 12 BW ACCORDING TO PIPE SCHEDULE A-03 33 FLANGE AB6B31-01 1/2 1 2500# RJ ACCORDING TO PIPE SCHEDULE B-01 34 FLANGE AB6B31-01 1+1/2 12 2500# RJ ACCORDING TO PIPE SCHEDULE B-04 35 BLIND FLANGE AB6B31-01 1/2 1 2500# RJ B-03 36 BLIND FLANGE AB6B31-01 1+1/2 12 2500# RJ B-05 CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGE END CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END 97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 29 OLET AB6B31 01 A 03PIPE SCHEDULEBW x BW 37 ORIFICE FLANGE AB6B31-01 1+1/2 12 2500# RJ ACCORDING TO PIPE SCHEDULE 38 FIGURE 8 AB6B31-01 1/2 12 2500# RJ 39 GASKET AB6B31-01 1/2 12 2500# RJ E-03 40 INSULATION KIT AB6B31-01 1 12 2500# E-04 41 BOLTING AB6B31-01 P-01 INSULATION KIT, GASKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD , CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A694 F65, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A- 193 GR. B7, NUTS ASTM A-194 GR. 2H, RING JOINT FACE FLANGED END CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 644/761 Elaborado 25/03/11 CLASS 2500 MATERIAL: REV: C DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 4000 API 5L GR. X65 PSL 2 DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 300# 600# 900# 1500# 2500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 6170 TREATED WATER TWA PWHT FOR THK > 19 mm 200 5655 20 % X-RAY 300 5450 400 5280 500 5025 600 4730 650 4575 700 4425 750 4230 800 3430 FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/8" RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / MSS SP-75 WPHY 65 / ASTM A694 F65 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 AB6B32-01 PIPING MATERIAL SPECIFICATION NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 645/761 Elaborado 25/03/11 CLASS 2500 MATERIAL: REV: C DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 4000 API 5L GR. X65 PSL 2 DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 FLANGE FINISH ANSI RATING CORROSION ALLOWANCE POR: 1/8" RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / MSS SP-75 WPHY 65 / ASTM A694 F65 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 AB6B32-01 PIPING MATERIAL SPECIFICATION ECP-VST-G-GEN-FT-001 646/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB6B32-01 1/2 1 1/2 2500# SW GA07F0B2 COMPONENTS DESCRIPTION Versión 1 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO ASME B16.34, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS CARBON STEEL, GATE VALVE LP, ASTM A-216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 2 GATE VALVE AB6B32-01 2 12 2500# RJ GA07B0B1 3 GATE VALVE AB6B32-01 4 10 2500# RJ p GA07B0B3 4 CHECK VALVE AB6B32-01 2 12 2500# RJ CK07B0B1 , , FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, CONDUIT GATE VALVE, ASTM A-216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE. GEAR OPERATOR CARBON STEEL, SWING CHECK VALVE, FB, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 6D, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SOFT IRON OVAL RING, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 6D 5 GLOBE VALVE AB6B32-01 1/2 1 1/2 2500# SW GL07F0B2 6 GLOBE VALVE AB6B32-01 2 10 2500# RJ GL07B0B2 7 BALL VALVE AB6B32-01 2 12 2500# RJ BA07B0I1J STELLITE (API N. 8), COMMENT: API 6D CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A105, ALL APPLICABLE POINTS AS FOR ASME B16.34, SOCKET WELDING FACE ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, RB, ALL APPLICABLE POINTS AS FOR BS 1873, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR CARBON STEEL, BALL VALVE LP FB, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR ASME B16.34/API 6D, RING JOINT FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON ED, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS. ECP-VST-G-GEN-FT-001 647/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 8 PIPE AB6B32-01 1/2 1 1/2 PE XXS T-01 9 PIPE AB6B32-01 2 2 BE XXS T-01 10 PIPE AB6B32-01 3 3 BE 160 T-04 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 11 PIPE AB6B32-01 4 12 BE 120 T-04 12 ELBOW 45 DEGREES AB6B32-01 1/2 1 1/2 9000# SW A-01 13 ELBOW 45 DEGREES AB6B32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 14 ELBOW 45 DEGREES AB6B32-01 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 15 ELBOW 90 DEGREES AB6B32-01 1/2 1 1/2 9000# SW A-01 16 ELBOW 90 DEGREES AB6B32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 CARBON STEEL, SEAMLESS PIPE, API 5L GR, X65 PSL 2, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 17 ELBOW 90 DEGREES AB6B32-01 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 2 2 1/2 1 1/2 3/4 1 1/2 1/2 1 3 12 2 10 3 12 2 10 22 CAP AB6B32-01 1/2 1 1/2 9000# SW A-01 A-0218 CONCENTRIC REDUCER AB6B32-01 BW x PE ACCORDING TO PIPE SCHEDULE BW x BW ACCORDING TO PIPE SCHEDULE A-0320 CONCENTRIC REDUCER AB6B32-01 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 BW x BW ACCORDING TO PIPE SCHEDULE A-0321 ECCENTRIC REDUCER AB6B32-01 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 PE x PE ACCORDING TO PIPE SCHEDULE A-0219 CONCENTRIC REDUCER AB6B32-01 CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR.WPB, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC SWAGE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, PLAIN END CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 23 CAP AB6B32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 24 CAP AB6B32-01 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, CAP, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 648/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 25 STRAIGHT TEE AB6B32-01 1/2 1 1/2 9000# SW A-01 26 STRAIGHT TEE AB6B32-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 27 STRAIGHT TEE AB6B32-01 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 STRAIGHT BARRED TEE AB6B32-01 8 12 BW ACCORDING TO PIPE SCHEDULE A-03 3/4 1 1/2 1/2 1 1/2 3 12 2 10 3 12 2 10 3 12 1/2 1 1/2 8 12 2 4 G / / # ACCORDING TO SW x SW A-0129 REDUCER TEE AB6B32-01 9000# BW x BW ACCORDING TO PIPE SCHEDULE A-0331 REDUCER BARRED TEE AB6B32-01 BW x BW ACCORDING TO PIPE SCHEDULE A-0333 OLET AB6B32-01 CARBON STEEL, WELDOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP-97, BEVELED ENDS AS PER ASME B16.25 BW x BW ACCORDING TO PIPE SCHEDULE A-0330 REDUCER TEE AB6B32-01 BW x SW A-0332 OLET AB6B32-01 9000# CARBON STEEL, SOCKOLET, ASTM A694 F65, DIMENSIONS AS PER MSS SP-97, BEVELED END AS PER ASME B16.25, SOCKETWELD END AS PER ASME B16.11 CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER MANUFACTURER´S STD / ASME B16.9 ALL POINTS APPLICABLE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS 34 FLANGE AB6B32-01 1/2 1 1/2 2500# RJ ACCORDING TO PIPE SCHEDULE B-01 35 FLANGE AB6B32-01 2 2 2500# RJ ACCORDING TO PIPE SCHEDULE B-02 36 FLANGE AB6B32-01 3 12 2500# RJ ACCORDING TO PIPE SCHEDULE B-04 37 FLANGE AB6B32-01 6 8 2500# BW x BW ACCORDING TO PIPE SCHEDULE 38 FLANGE AB6B32-01 8 8 2500# BW x BW ACCORDING TO PIPE SCHEDULE 39 FLANGE AB6B32-01 8 8 2500# BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 50 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 25 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, DIMENSIONS AS PER SPECIAL DESIGN, CALCULATED FOR TO RESIST 80 TONS OF THRUST FORCE CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END ECP-VST-G-GEN-FT-001 649/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION Versión 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 40 BLIND FLANGE AB6B32-01 1/2 2 2500# RJ B-03 41 BLIND FLANGE AB6B32-01 3 12 2500# RJ B-05 ACCORDING TO CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A105, DIMENSIONS AS PER ASME B16 36 GENERAL REQUIREMENTS AS PER 42 ORIFICE FLANGE AB6B32-01 2 2 2500# RJ ACCORDING TO PIPE SCHEDULE 43 ORIFICE FLANGE AB6B32-01 3 12 2500# RJ ACCORDING TO PIPE SCHEDULE 44 UNION AB6B32-01 1/2 1 1/2 9000# SW 45 NIPPLE AB6B32-01 1/2 1 1/2 PE T-01 46 COUPLING AB6B32-01 1 1 1/2 9000# SW A-01 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RING JOINT FACE FLANGED END CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A694 F65, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H, RING JOINT FACE FLANGED END CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, SEAMLESS PIPE NIPPLE, ASTM A106 GR.B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L= 100mm, 200mm 47 FIGURE 8 AB6B32-01 1/2 12 2500# RJ 48 GASKET AB6B32-01 1/2 12 2500# RJ E-03 49 INSULATION KIT AB6B32-01 1 12 2500# E-04 50 BOLTING AB6B32-01 P-01 CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT INSULATION KIT, GASKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 650/761 Elaborado 25/03/11 CLASS 2500 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 4000 API 5L GR. X 65 PSL 2 DATE: 05-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 300# 600# 900# 1500# 2500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 6170 TREATED WATER TWA 200 5655 300 5450 400 5280 500 5025 600 4730 650 4575 700 4425 750 4230 800 3430 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB6B33-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A694 F65 / ASTM A234 GR. WPB / ASTM MSS SP-75 WPHY 65 / ASTM A216 GR. WCB / ASTM A516 GR. 70 800 3430 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 651/761 Elaborado 25/03/11 CLASS 2500 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 4000 API 5L GR. X 65 PSL 2 DATE: 05-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAB6B33-01 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE RJ ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A105 / ASTM A694 F65 / ASTM A234 GR. WPB / ASTM MSS SP-75 WPHY 65 / ASTM A216 GR. WCB / ASTM A516 GR. 70 ECP-VST-G-GEN-FT-001 652/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB6B33-01 1/2 1 1/2 2500# SW GA07F0B2 2 GATE VALVE AB6B33-01 2 12 2500# RJ GA07B0B1 COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 CARBON STEEL, GATE VALVE REDUCER PORT FEMALE ENDS, ASTM A105, CONSTRUCTION AS PER ASME B16.34, SOCKET WELDING ENDS AS PER ASME 16.11. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TESTS. CARBON STEEL, GATE VALVE LONG PATTERN, ASTM A216 GR. WCB, FB, CONSTRUCTION AS PER API 600, FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, 3 GATE VALVE AB6B33-01 4 10 2500# RJ GA07B0B3 4 GLOBE VALVE AB6B33-01 1/2 1 1/2 2500# SW GL07F0B2 5 GLOBE VALVE AB6B33-01 2 10 2500# RJ GL07B0B2 ( ) PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, CONDUIT GATE VALVE LONG , ASTM A216 GR. WCB, CONSTRUCTION AS PER API 6D, FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE. GEAR OPERATOR CARBON STEEL, GLOBE VALVE REDUCER PORT FEMALE ENDS, ASTM A105, CONSTRUCTION AS PER ASME B16.34, SOCKET WELDING ENDS AS PER ASME 16.11. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. CARBON STEEL, GLOBE VALVE LONG PATTERN , ASTM A216 GR. WCB, CONSTRUCTION AS PER BS 1873, FLANGED ENDS AS PER ASME 16.5. BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE TRIM: F6 STELLITE (API N 8) STEM: O S & Y 6 CHECK VALVE AB6B33-01 2 8 2500# RJ CK07B0B1 7 BALL VALVE AB6B33-01 2 12 2500# RJ BA07B0I1J 8 PIPE AB6B33-01 1/2 1 1/2 PE XXS T-01 9 PIPE AB6B33-01 2 2 BE XXS T-01 CARBON STEEL, CHECK VALVE SWING , ASTM A216 GR. WCB, FB, CONSTRUCTION AS PER API 6D, FLANGED ENDS AS PER ASME 16.5. BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SOFT IRON OVAL RING, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: API 6D. CARBON STEEL, BALL VALVE LONG PATTERN , ASTM A216 GR. WCB, FB, CONSTRUCTION AS PER ASME 16.34/API 6D, FLANGED ENDS AS PER ASME 16.5. BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON ED, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS, OTHER REQUIREMENTS: API 6D CARBON STEEL, SEAMLESS PIPE, ASTM A106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL SEAMLESS PIPE API 5L GR X 65 DIMENSIONS AS RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR. 10 PIPE AB6B33-01 3 6 BE XXS T-04 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X 65, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 653/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 11 PIPE AB6B33-01 8 8 BE API 1,000 T-04 12 PIPE AB6B33-01 10 12 BE API 1,250 T-04 13 NIPPLE AB6B33-01 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 14 NIPPLE AB6B33-01 1/2 1 1/2 PE ACCORDING TO PIPE SCHEDULE T-01 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X 65, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END , FOR L = 100 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END , FOR L = 200 CARBON STEEL, ELBOW 90 DEGREES FEMALE ENDS, ASTM A105, CARBON STEEL, SEAMLESS PIPE, API 5L GR. X 65, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 15 ELBOW 90 DEGREES AB6B33-01 1/2 1 1/2 9000# SW A-01 16 ELBOW 45 DEGREES AB6B33-01 1/2 1 1/2 9000# SW A-01 17 ELBOW 45 DEGREES LR AB6B33-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 18 ELBOW 45 DEGREES LR AB6B33-01 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 19 ELBOW 90 DEGREES LR AB6B33-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 20 ELBOW 90 DEGREES LR AB6B33-01 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 3 12 1/2 1 1/2 8 12 CARBON STEEL, ELBOW 45 DEGREES LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES LONG RADIUS, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SOCKOLET, ASTM A 694 F65, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING END AS PER ASME B16.11, BEVELED END AS PER ASME B16.25 CARBON STEEL WELDOLET ASTM A 694 F65 DIMENSIONS AS PER CARBON STEEL, ELBOW 90 DEGREES FEMALE ENDS, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES FEMALE ENDS, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES LONG RADIUS, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ACCORDING TO BW x SW21 OLET AB6B33-01 9000# 8 12 2 4 23 STRAIGHT TEE AB6B33-01 1/2 1 1/2 9000# SW A-01 3/4 1 1/2 1/2 1 1/2 25 STRAIGHT TEE AB6B33-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 26 STRAIGHT TEE AB6B33-01 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 27 STRAIGHT BARRED TEE AB6B33-01 8 12 BW ACCORDING TO PIPE SCHEDULE A-03 3 12 2 10 3 12 2 10 CARBON STEEL, STRAIGHT BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, REDUCER BARRED TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BARRED TEE, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL COUPLING ASTM A105 DIMENSIONS AS PER ASME CARBON STEEL, WELDOLET, ASTM A 694 F65, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ACCORDING TO PIPE SCHEDULE A-03 A-01CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 BW x BW BW x BW 24 REDUCER TEE AB6B33-01 9000# A-0328 REDUCER TEE AB6B33-01 22 OLET AB6B33-01 SW x SW CARBON STEEL, EQUAL TEE, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, EQUAL TEE, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 BW x BW ACCORDING TO PIPE SCHEDULE A-0329 REDUCER BARRED TEE AB6B33-01 ACCORDING TO PIPE SCHEDULE 30 COUPLING AB6B33-01 1 1 1/2 9000# SW A-01 2 2 1/2 1 1/2 3/4 1 1/2 1/2 1 3 12 2 10 3 12 2 10 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY65 DIMENSIONS AS PER B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ECCENTRIC REDUCER, MSS SP-75 WPHY65 DIMENSIONS AS PER B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, CONCENTRIC SWAGE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, PLAIN END CARBON STEEL, CONCENTRIC REDUCER NIPPLE, ASTM A234 GR. WPB, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS CONCENTRIC REDUCER AB6B33-01 BW x PE A-0334 ECCENTRIC REDUCER 32 CONCENTRIC REDUCER AB6B33-01 BW x BW ACCORDING TO PIPE SCHEDULE PE x PE A-0333 CONCENTRIC REDUCER AB6B33-01 ACCORDING TO PIPE SCHEDULE A-02 ACCORDING TO PIPE SCHEDULE A-02 AB6B33-01 BW x BW ACCORDING TO PIPE SCHEDULE 31 ECP-VST-G-GEN-FT-001 654/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 35 UNION AB6B33-01 1/2 1 1/2 9000# SW 36 CAP AB6B33-01 1/2 1 1/2 9000# SW A-01 37 CAP AB6B33-01 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 38 CAP AB6B33-01 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKET WELDING ENDS AS PER ASME 16.11 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS CARBON STEEL, CAP, ASTM A234 GR. WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 65, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 39 FLANGE AB6B33-01 1/2 1 1/2 2500# RJ ACCORDING TO PIPE SCHEDULE B-01 40 FLANGE AB6B33-01 2 2 2500# RJ ACCORDING TO PIPE SCHEDULE B-02 41 FLANGE AB6B33-01 3 12 2500# RJ ACCORDING TO PIPE SCHEDULE B-04 42 FLANGE AB6B33-01 6 8 2500# BW x BW ACCORDING TO PIPE SCHEDULE 43 FLANGE AB6B33-01 8 8 2500# BW x BW ACCORDING TO PIPE SCHEDULE 44 FLANGE AB6B33-01 8 8 2500# BW x BW ACCORDING TO PIPE SCHEDULE 45 BLIND FLANGE AB6B33-01 1/2 2 2500# RJ B-03 CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT CARBON STEEL, WELDING NECK FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, SPECIAL DESIGN, CALCULATED FOR TO RESIST 50 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, SPECIAL DESIGN, CALCULATED FOR TO RESIST 25 TONS OF THRUST FORCE CARBON STEEL, ANCHOR FLANGE, ASTM A694 F65, SPECIAL DESIGN, CALCULATED FOR TO RESIST 80 TONS OF THRUST FORCE 46 BLIND FLANGE AB6B33-01 3 12 2500# RJ B-05 47 ORIFICE FLANGE AB6B33-01 2 2 2500# RJ ACCORDING TO PIPE SCHEDULE 48 ORIFICE FLANGE AB6B33-01 3 12 2500# RJ ACCORDING TO PIPE SCHEDULE 49 FIGURE 8 AB6B33-01 1/2 12 2500# RJ 50 GASKET AB6B33-01 1/2 12 2500# RJ E-03 51 INSULATION KIT AB6B33-01 1 12 2500# E-04 52 BOLTING AB6B33-01 P-01 INSULATION KIT, GASKET TYPE F WITH SEALS, INSULATION WASHERS, STEEL WASHERS AND INSULATING SLEEVES, DIMENSIONS AS PER MANUFACTURER´S STD CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1 1 DIMENSIONS AS PER CARBON STEEL, BLIND FLANGE, ASTM A694 F65, DIMENSIONS AS PER ASME B16.5, RING JOINT CARBON STEEL, COUPLE ORIFICE WELDING NECK FLANGE, ASTM A105, 1/2" THREADED-TAP, DIMENSIONS AS PER ASME B16.36, RING JOINT CARBON STEEL, COUPLE ORIFICE WELDING NECK FLANGE, ASTM A694 F65, 1/2" THREADED-TAP, DIMENSIONS AS PER ASME B16.36, RING JOINT CARBON STEEL, SPECTACLE BLIND FIGURE 8S, ASTM A 516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT, WAFER JOINT TYPE SOFT IRON OVAL RING JOINT GASKET, DIMENSIONS AS PER ASME B16.20, RING JOINT 52 BOLTING AB6B33 01 P 01THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 655/761 Elaborado 25/03/11 CLASS 2500 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL: DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 5450 API 5L GR. X 70 DATE: 01-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 300 DESIGN LIMITS Class Temperature 300# 600# 900# 1500# 2500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 6170 ASOCIATED GAS ASG 200 5655 300 5450 400 5280 500 5025 600 4730 650 4575 700 4425 750 4230 800 3430 AB6B33-02 FLANGE FINISH ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 CORROSION ALLOWANCE 1/8" RJ Versión 1 POR: ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A694 F70 / ASTM A105 / MSS SP-75 WPHY 70 / MSS SP-44 WPHY F70 800 3430 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 656/761 Elaborado 25/03/11 CLASS 2500 MATERIAL: REV: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL: DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 5450 API 5L GR. X 70 DATE: 01-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 300 AB6B33-02 FLANGE FINISH ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 CORROSION ALLOWANCE 1/8" RJ Versión 1 POR: ASTM A106 GR. B ONLY FOR PIPE 2" AND LESS / ASTM A516 GR 70 / ASTM A234 WPB / ASTM A216 WCB / ASTM A694 F70 / ASTM A105 / MSS SP-75 WPHY 70 / MSS SP-44 WPHY F70 ECP-VST-G-GEN-FT-001 657/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AB6B33-02 1/2 1 1/2 2500# SW GA07F0B2 CARBON STEEL, GATE VALVE RP FEMALE ENDS RB, ASTM A105, ACCORDING TO ASME B16.34, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 2 GATE VALVE AB6B33-02 2 12 2500# RJ GA07B0B1 3 GATE VALVE AB6B33-02 4 12 2500# RJ GA07B0B3 COMMENT: API 598 TESTS. CARBON STEEL, GATE VALVE LP, ASTM A216 GR. WCB, FB, ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR, COMMENT: API 598 TESTS. CARBON STEEL, CONDUIT GATE VALVE, ASTM A216 GR. WCB, ACCORDING TO API 6D, DIMENSIONS AS PER ASME B16.10, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, WEDGE: DOUBLE EXPANDING WEDGE - THROUGH CONDUIT, SEATS: RENEWABLE TYPE, TRIM: 13%CR HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS 4 CHECK VALVE AB6B33-02 2 12 2500# RJ CK07B0B1 13%CR+HF (TUNGSTEN CARBIDE) GATE SEAT&SEATS, STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE; GEAR OPERATOR CARBON STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR API 6D, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SOFT IRON OVAL RING, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), COMMENT: API 6D ECP-VST-G-GEN-FT-001 658/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 5 GLOBE VALVE AB6B33-02 1/2 1 1/2 2500# SW P GL07F0B2 CARBON STEEL, GLOBE VALVE RP FEMALE ENDS RB, ASTM A105, ALL APPLICABLE POINTS AS FOR API 602, SOCKET WELDING FACE ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COEFFICIENT PA 6 GLOBE VALVE AB6B33-02 2 12 2500# RJ GL07B0B2 7 BALL VALVE AB6B33-02 2 12 2500# RJ BA07B0I1J CARBON STEEL, BALL VALVE LP FB, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR ASME B16.347API 6D, RING JOINT FACE FLANGED ENDS, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON ED, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: PEEK, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: GEAR, COMMENT: API 598 TESTS PA CARBON STEEL, GLOBE VALVE LP, ASTM A216 GR. WCB, ALL APPLICABLE POINTS AS FOR BS 1873, RING JOINT FACE FLANGED ENDS, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: OVAL RING SOFT IRON, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: GEAR 8 PIPE AB6B33-02 1/2 1 1/2 PE XXS T-01 9 PIPE AB6B33-02 2 2 BE XXS T-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" ECP-VST-G-GEN-FT-001 659/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 10 PIPE AB6B33-02 3 6 BE XXS T-02 11 PIPE AB6B33-02 8 8 BE API 1,000 T-02 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X 70, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" CARBON STEEL, SEAMLESS PIPE, API 5L GR. X 70, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 12 PIPE AB6B33-02 10 12 BE 160 T-02 13 ELBOW 45 DEGREES AB6B33-02 1/2 1 1/2 9000# SW A-01 14 ELBOW 45 DEGREES AB6B33-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 15 ELBOW 45 DEGREES AB6B33-02 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 16 ELBOW 90 DEGREES AB6B33-02 1/2 1 1/2 9000# SW A-01 CARBON STEEL, ELBOW 45 DEGREES FEMALE END, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, MSS SP-75 WPHY 70, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, ELBOW 90 DEGREES FEMALE END, ASTM A105 DIMENSIONS AS PER ASME B16 11 CARBON STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, SEAMLESS PIPE, API 5L GR. X 70, DIMENSIONS AS PER ASME B36.10, BEVELED ENDS AS PER ASME B16.25, DOUBLE RANDOM LENGHT >= 2" 16 ELBOW 90 DEGREES AB6B33-02 1/2 1 1/2 9000# SW A-01 17 ELBOW 90 DEGREES AB6B33-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 18 ELBOW 90 DEGREES AB6B33-02 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 2 4 3/4 1 1/2 3/4 1 1/2 1/2 1 3 12 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, ELBOW 90 DEGREES, LONG RADIUS, MSS SP-75 WPHY 70, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CONCENTRIC SWAGE, MSS SP-75 WPHY 70, DIMENSIONS AS PER MSS SP-95, BEVELED END AS PER ASME B16.25, PLAIN END CARBON STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR.WPB, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS BW x BW ACCORDING TO PIPE CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 70, DIMENSIONS AS PER ASME B16.9, BEVELED21 CONCENTRIC REDUCER AB6B33-02 PE x PE AB6B33-02 A-03 A-02 A-03BW x PE ACCORDING TO PIPE SCHEDULE 20 CONCENTRIC REDUCER AB6B33-02 19 CONCENTRIC REDUCER 2 6 BW x BW SCHEDULE WPHY 70, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 21 CONCENTRIC REDUCER AB6B33-02 A-03 ECP-VST-G-GEN-FT-001 660/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 3 12 2 6 23 CAP AB6B33-02 1/2 1 1/2 9000# SW A-01 CARBON STEEL, CAP, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 ECCENTRIC REDUCER AB6B33-0222 BW x BW ACCORDING TO PIPE SCHEDULE A-03 CARBON STEEL, CONCENTRIC REDUCER, MSS SP-75 WPHY 70, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 24 CAP AB6B33-02 2 2 BW ACCORDING TO PIPE SCHEDULE A-02 25 CAP AB6B33-02 3 12 BW ACCORDING TO PIPE SCHEDULE A-03 26 STRAIGHT TEE AB6B33-02 1/2 1 1/2 9000# SW A-01 27 STRAIGHT TEE AB6B33-02 2 2 BW ACCORDING TO SCHEDULE PIPE A-02 28 STRAIGHT TEE AB6B33-02 3 12 BW ACCORDING TO SCHEDULE PIPE A-03 CARBON STEEL, STRAIGHT TEE, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, ASTM A234 GR.WPB, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, CAP, MSS SP-75 WPHY 70, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CARBON STEEL, STRAIGHT TEE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, STRAIGHT TEE, MSS SP-75 WPHY 70, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 3/4 1 1/2 1/2 1 1/2 CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 A-01SW x SW29 REDUCER TEE AB6B33-02 9000# ECP-VST-G-GEN-FT-001 661/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 3 12 2 6 2 12 1/2 1 1/2 31 OLET AB6B33-02 9000# BW x SW ACCORDING TO PIPE SCHEDULE CARBON STEEL, SOCKOLET, ASTM A694 F70, DIMENSIONS AS PER MSS SP-97, BEVELED END AS PER ASME B16.25, SOCKETWELD END AS PER ASME B16.11 A-02BW x BW ACCORDING TO PIPE SCHEDULE30 REDUCER TEE AB6B33-02 CARBON STEEL, REDUCER TEE, MSS SP-75 WPHY 70, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 4 12 3 6 33 FLANGE AB6B33-02 1/2 1 1/2 2500# RJ ACCORDING TO PIPE SCHEDULE B-01 34 FLANGE AB6B33-02 2 2 2500# RJ ACCORDING TO PIPE SCHEDULE B-02 35 FLANGE AB6B33-02 3 12 2500# RJ ACCORDING TO PIPE SCHEDULE B-04 36 BLIND FLANGE AB6B33-02 1/2 2 2500# RJ B-03 37 BLIND FLANGE AB6B33-02 3 12 2500# RJ CARBON STEEL, WELDING NECK FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, SOCKET WELDING FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, MSS SP-44 GR. F70, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, WELDING NECK FLANGE, MSS SP-44 Gr. F70, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END CARBON STEEL, BLIND FLANGE, ASTM A105, DIMENSIONS AS PER ASME B16.5, RING JOINT FACE FLANGED END 32 OLET AB6B33-02 9000# BW x BW ACCORDING TO PIPE SCHEDULE CARBON STEEL, WELDOLET, ASTM A694 F70, DIMENSIONS AS PER MSS SP-97, BEVELED ENDS AS PER ASME B16.25 38 COUPLE ORIFICE FLANGE AB6B33-02 2 2 2500# RJ ACCORDING TO PIPE SCHEDULE CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), ASTM A105, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RING JOINT FACE FLANGED END FLANGED END ECP-VST-G-GEN-FT-001 662/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 39 COUPLE ORIFICE FLANGE AB6B33-02 3 12 2500# RJ ACCORDING TO PIPE SCHEDULE CARBON STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH 1/2" NPT ORIFICE), MSS SP-44 Gr. F70, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B7, NUTS ASTM A-194 GR. 2H AND PLUGS ASTM A105, RING JOINT FACE FLANGED END 40 UNION AB6B33-02 1/2 1 1/2 9000# SW 41 NIPPLE AB6B33-02 1/2 1 1/2 PE T-01 42 COUPLING AB6B33-02 1 1 1/2 9000# SW A-01 43 FIGURE 8 AB6B33-02 1/2 12 2500# RJ 44 GASKET AB6B33-02 1/2 12 2500# RJ E-03 CARBON STEEL, FIGURE 8 BLIND, ASTM A516 GR. 70, DIMENSIONS AS PER ASME B16.48, RING JOINT FACE ENDS, WAFER JOINT TYPE OVAL RING, RING JOINT GASKET, SOFT IRON RING JOINT, DIMENSIONS AS PER ASME B16.20, RING JOINT FACE ENDS CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, SOCKETWELD ENDS AS PER ASME B16.11 CARBON STEEL, SEAMLESS PIPE NIPPLE, ASTM A106 GR.B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, L= 100mm, 200mm CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKETWELD ENDS AS PER ASME B16.11 45 BOLTING AB6B33-02 P-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 663/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL & GALV. C.S. DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 185 ASTM A106 GR. B DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 200 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 INSTRUMENT AIR INA 200 260 UTILITY AIR UTA 300 230 400 200 500 170 600 140 650 125 700 110 750 95 800 80 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE FF ASTM A105 / ASTM A105 Galv. A153 CL B / ASTM A395 / ASTM A234 WPB / ASTM A216 WCB / ASTM B62 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAD1A33-01 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 ECP-VST-G-GEN-FT-001 664/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL & GALV. C.S. DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 185 ASTM A106 GR. B DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 200 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE FF ASTM A105 / ASTM A105 Galv. A153 CL B / ASTM A395 / ASTM A234 WPB / ASTM A216 WCB / ASTM B62 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAD1A33-01 ECP-VST-G-GEN-FT-001 665/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AD1A33-01 1/2 2 150# FTH GA16H6J2 2 GATE VALVE AD1A33-01 3 4 150# RF GA01A0B1 COMPONENTS DESCRIPTION GATE VALVE RP FEMALE ENDS RB, ASTM B62, FTH, 150 CLASS, BODY/BONNET: UNION TYPE, STUD BOLTS: NOT REQUIRED, GASKET: GRAPHITE, WEDGE: SOLID TYPE, SEATS: INTEGRAL TYPE, TRIM: BRONZE, STEM: I.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, COMMENT: API 598 TEST, PORT OPENING: REDUCER, OTHER MSS SP-80. GATE VALVE LP, ASTM A216 GR. WCB, FLG 150 LB RF, API 602, FB, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, WEDGE: FLEXIBLE, SEATS: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL. PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 3 GLOBE VALVE AD1A33-01 2 4 150# RF GL01A0B2 4 CHECK VALVE AD1A33-01 1/2 1+1/2 150# FTH CK18H6J2 5 CHECK VALVE AD1A33-01 2 4 150# RF CK01A0B1 6 BALL VALVE AD1A33 01 2 4 150# RF BA01A0I2J BALL VALVE LP RB, ASTM A216 GR. WCB, FLG, 150 LB, RB, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: , , GLOBE VALVE LP, ASTM A216 GR. WCB, FLG 150 LB RF, RB, ALL APPLICABLE POINTS AS FOR API 602, BODY/BONNET: BOLTED, STUD BOLTS: STUD A193/B7- NUTS A194/2H, GASKET: SPIRAL/W AISI 304 - GRAPHITE FILLER, DISC: SWIVEL PLUG TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N.8), STEM: O.S. & Y, PACKING: FLEXIBLE GRAPHITE, OPERATION: HAND WHEEL, CHECK VALVE SWING FEM.ENDS RB, ASTM B62, FTH, 150 CLASS, BODY/CAP: UNION TYPE, STUD BOLTS: NOT REQUIRED, GASKET: ASBESTOS FREE, DISC: SWING TYPE, SEAT: INTEGRAL OR WELDED TYPE, TRIM: BRONZE, INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: AS PER MSS SP-80. CHECK VALVE SWING, ASTM A216 GR. WCB, FLG 150 LB RF, FB, ALL APPLICABLE POINTS AS FOR API 602, BODY/CAP: BOLTED, STUD BOLTS: STUD A193/B7 - NUTS A194/2H, GASKET: SPIRAL W. 304- GRAPHITE FILLER, DISC: SWING TYPE, SEAT: RENEWABLE TYPE, TRIM: F6 STELLITE (API N. 8), INSTALLATION: HORIZONTAL & VERTICAL, COMMENT: API 602. 6 BALL VALVE AD1A33-01 2 4 150# RF BA01A0I2J 7 PIPE AD1A33-01 1/2 1 1/2 MTH w/ COUPLING XXS T-01 8 PIPE AD1A33-01 2 2 MTH w/ COUPLING 160 T-01 9 PIPE AD1A33-01 3 4 PE 40 T-01 10 CLAMP COUPLING AD1A33-01 3 4 Mechanical Joint 11 ADAPTER FLANGE AD1A33-01 3 4 150# FF ACCORDING TO SCHEDULE PIPE 3 4 1/2 2 13 NIPPLE AD1A33-01 1/2 2 PE ACCORDING TO PIPE T-01 12 MECHANICAL REDUCING TEE AD1A33-01 Mechanical Joint x FTH ACCORDING TO SCHEDULE PIPE STEM: AISI 316 ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: TRUNNION TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, OTHER REQUIREMENTS: RF, ASME B16.34/API 6D CLAMP COUPLING, ASTM A395, MECHANICAL JOINT, STYLE 07. VICTAULIC BRAND. MANUFACTURER'S STD, GROOVE END FLANGE, ASTM A105, FLG, 150 LB, STYLE 741. VICTAULIC BRAND. FF, MANUFACTURER'S STD MECHANICAL REDUCING TEE, ASTM A395, MECHANICAL JOINT X FTH, STYLE 920N. VICTAULIC BRAND. MANUFACTURER'S STD, PIPE, ASTM A106 GR. B, PE, SINGLE RANDOM LENGHT >2". PIPE SHALL BE SUPPLIED WITH GROOVE FOR VICTAULIC FITTINGS. ASME B36.10 PIPE, ASTM A106 GR. B GALVANIZED, MTH W/ COUPLING, SINGLE RANDOM LENGHT GALVANIZED AS PER A 153, ASME B36.10 PIPE, ASTM A106 GR. B GALVANIZED, MTH W/ COUPLING, SINGLE RANDOM LENGHT GALVANIZED AS PER A 153, ASME B36.10 PIPE NIPPLE - LENGTH = 100 MM, ASTM A106 GR. B GALVANIZED, PE, ASME B36.10 SCHEDULE 14 NIPPLE AD1A33-01 1/2 2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 15 NIPPLE AD1A33-01 1/2 2 MTH ACCORDING TO PIPE SCHEDULE T-01 PIPE NIPPLE - LENGTH = 100 MM, ASTM A106 GR. B GALVANIZED, MTH, ASME B36.10. PIPE NIPPLE - LENGTH = 100 MM, ASTM A106 GR. B GALVANIZED, MTH, ASME B36.10. ECP-VST-G-GEN-FT-001 666/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 16 NIPPLE AD1A33-01 1/2 2 PE ACCORDING TO PIPE SCHEDULE T-01 17 NIPPLE AD1A33-01 1/2 2 MTH ACCORDING TO PIPE SCHEDULE T-01 18 NIPPLE AD1A33-01 1/2 2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 PIPE NIPPLE - LENGTH = 150 MM, ASTM A106 GR. B GALVANIZED, PE, ASME B36.10. PIPE NIPPLE - LENGTH = 200 MM, ASTM A106 GR. B GALVANIZED, MTH, ASME B36.10. PIPE NIPPLE - LENGTH = 200 MM, ASTM A106 GR. B GALVANIZED, PE X MTH, ASME B36.10. 45 DEGREE ELBOW FEMALE END ASTM A105 GALVANIZED AS PER 19 ELBOW 45 DEGREES AD1A33-01 1/2 1+1/2 6000# FTH A-01 20 ELBOW 45 DEGREES AD1A33-01 2 2 3000# FTH A-01 21 ELBOW 90 DEGREES AD1A33-01 1/2 1+1/2 6000# FTH A-01 22 ELBOW 90 DEGREES AD1A33-01 2 2 3000# FTH A-01 23 ELBOW 45 DEGREES SHORT RADIUS AD1A33-01 3 4 Groove Ends ACCORDING TO PIPE SCHEDULE 24 ELBOW 90 DEGREES SHORT RADIUS AD1A33-01 3 4 Groove Ends ACCORDING TO PIPE SCHEDULE 25 EQUAL TEE AD1A33-01 1/2 1+1/2 6000# FTH A-01 45 DEGREE ELBOW FEMALE END, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 6000#, ASME B16.11. 45 DEGREE ELBOW FEMALE END, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 3000#, ASME B16.11. 45 DEGREE ELBOW FEMALE END, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 6000#, ASME B16.11. 90 DEGREE ELBOW FEMALE END, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 3000#, ASME B16.11. 45 DEGREE ELBOW SR, ASTM A395, GROOVE ENDS, N° 11 TYPE. VICTAULIC BRAND. MANUFACTURER'S STD, 90 DEGREE ELBOW SR, ASTM A395, GROOVE ENDS, N° 10 TYPE. VICTAULIC BRAND. MANUFACTURER'S STD, EQUAL TEE FEMALE, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 6000#, ASME B16.11. 26 EQUAL TEE AD1A33-01 2 2 3000# FTH A-01 3/4 2 1/2 1 1/2 28 EQUAL TEE AD1A33-01 3 4 Groove Ends ACCORDING TO PIPE SCHEDULE 3 4 2 3 30 COUPLING AD1A33-01 1/2 1+1/2 6000# SW A-01 31 COUPLING AD1A33-01 1/2 1+1/2 6000# SW x FTH A-01 32 COUPLING AD1A33-01 1/2 1+1/2 6000# FTH A-01 33 COUPLING AD1A33-01 2 2 3000# SW x FTH A-01 27 REDUCING TEE AD1A33-01 6000# FTH x FTH A-01 29 REDUCING TEE AD1A33-01 Groove Ends ACCORDING TO PIPE SCHEDULE EQUAL TEE FEMALE, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 3000#, ASME B16.11. REDUCING TEE FEMALE, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH X FTH, 6000#, ASME B16.11. EQUAL TEE, ASTM A395, GROOVE ENDS, N° 20 TYPE. VICTAULIC BRAND. MANUFACTURER'S STD, REDUCING TEE, ASTM A395, GROOVE ENDS, MANUFACTURER'S STD. COUPLING, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, SW, 6000#, ASME B16.11. COUPLING, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, SW X FTH, 6000#, ASME B16.11. COUPLING, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 6000#, ASME B16.11. COUPLING, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, SW X 33 COUPLING AD1A33-01 2 2 3000# SW x FTH A-01 34 COUPLING AD1A33-01 2 2 3000# FTH A-01 35 COUPLING AD1A33-01 2 2 3000# SW A-01 3/4 2 1/2 1 1/2 A-0236 CONCENTRIC REDUCER AD1A33-01 PE x MTH ACCORDING TO PIPE SCHEDULE FTH, 3000#, ASME B16.11. COUPLING, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 3000#, ASME B16.11. COUPLING, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, SW, 3000#, ASME B16.11. CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, PE X MTH, GALVANIZED AS PER A 153, MSS SP-95. ECP-VST-G-GEN-FT-001 667/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 3/4 2 1/2 1 1/2 3 4 1 1 1/2 4 4 3 3 3/4 2 37 CONCENTRIC REDUCER 39 AD1A33-01 MTH x MTH ACCORDING TO PIPE SCHEDULE A-02 38 CONCENTRIC REDUCER AD1A33-01 Groove x MTH ACCORDING TO PIPE SCHEDULE CONCENTRIC REDUCER AD1A33-01 Groove Ends ACCORDING TO PIPE SCHEDULE CONCENTRIC REDUCER, ASTM A395, GROOVE ENDS, N° 50 TYPE. VICTAULIC BRAND. MANUFACTURER'S STD, CONCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, MTH X MTH, GALVANIZED AS PER A 153, MSS SP-95. CONCENTRIC REDUCER, ASTM A395, GROOVE X MTH, N° 54 TYPE. VICTAULIC BRAND. MANUFACTURER'S STD, 3/4 2 1/2 1 1/2 4 4 3 3 42 UNION AD1A33-01 1/2 1+1/2 6000# FTH 43 UNION AD1A33-01 2 2 3000# FTH 44 CAP AD1A33-01 1/2 1+1/2 6000# FTH 45 CAP AD1A33-01 2 2 3000# FTH 46 CAP AD1A33-01 3 4 Groove Ends ACCORDING TO PIPE SCHEDULE A-0240 EXCENTRIC REDUCER AD1A33-01 MTH x MTH ACCORDING TO PIPE SCHEDULE 41 EXCENTRIC REDUCER AD1A33-01 Groove Ends ACCORDING TO PIPE SCHEDULE CAP FORGED, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 3000#, ASME B16.11. ECCENTRIC REDUCING NIPPLE, ASTM A234 GR. WPB, MTH X MTH, GALVANIZED AS PER A 153, MSS SP-95. Eccentric reducer, ASTM A395, GROOVE ENDS, N° 51 TYPE. VICTAULIC BRAND. MANUFACTURER'S STD, UNION, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 6000#, MSS SP-83. UNION, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 3000#, MSS SP-83. CAP FORGED, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FTH, 6000#, ASME B16.11. CAP ASTM A395, GROOVE ENDS, N° 60 TYPE. VICTAULIC BRAND. MANUFACTURER'S STD, SCHEDULE 47 FLANGE AD1A33-01 1/2 2 150# FF x FTH ACCORDING TO PIPE SCHEDULE 48 BLIND FLANGE AD1A33-01 3/4 2 150# FF 49 BLIND FLANGE AD1A33-01 3/4 2 150# FF B-03 50 BLIND FLANGE AD1A33-01 3 4 150# FF B-03 51 GASKET AD1A33-01 1/2 2 300# FF 52 GASKET AD1A33-01 1/2 2 150# FF 53 GASKET AD1A33-01 3 4 150# RF E-01 THREADED FLANGE, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FLG X FTH, 150 LB, FF, ASME B16.5. BLIND FLANGE, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FLG, 150 LB, PROVIDED WITH 1/2" FTHD TAPER BORE FF, MANUF.S STD / FLG CONN. FOR ASME B16.5. BLIND FLANGE, ASTM A105 GALVANIZED AS PER ASTM A153 CL. B, FLG, 150 LB, FF, MANUF.S STD / FLG CONN. FOR ASME B16.5. BLIND FLANGE, ASTM A105, FLG, 150 LB, FF, ASME B16.5. NON METALLIC FLAT GASKET, SYNTH.FIBER/NITRILE BINDER-GARLOCK BLUE GARD 3000, 300 LB, FF, ASME B16.21. NON METALLIC FLAT GASKET, SYNTH.FIBER/NITRILE BINDER-GARLOCK BLUE GARD 3000, 150 LB, FF, ASME B16.21. SPIRAL WOUND GASKET, -, LOW STRESS,- OUTER CARBON STEEL., 150 LB, SS304 INNER RING - CS OUTER RING RF, ASME B16.20. CARBON STEEL STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE 54 BOLTING AD1A33-01 P-01 CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 668/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL, GALV. C.S., BRONZE DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 250 ASTM A106 GR. B DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 285 FIRE WATER FWA 200 260 POTABLE WATER POT 300 230 UTILITY WATER WU 400 200 INSTRUMENT AIR INA 500 170 FOAM FOM 600 140 650 125 700 110 750 95 800 80 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 1.1 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE FF ASTM A105 / ASTM A395 / ASTM B61 / ASTM A234 GR. WPB / ASTM A123 / ASTM A153 CL.B. PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAD1C33-01 ECP-VST-G-GEN-FT-001 669/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: #¡REF! DESIGN PRESSURE (PSIG): From: 0 CARBON STEEL, GALV. C.S., BRONZE DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 250 ASTM A106 GR. B DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -20 To: 150 FLANGE FINISH 1/8" POR: CORROSION ALLOWANCE FF ASTM A105 / ASTM A395 / ASTM B61 / ASTM A234 GR. WPB / ASTM A123 / ASTM A153 CL.B. PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 ANSI RATINGAD1C33-01 ECP-VST-G-GEN-FT-001 670/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE AD1C33-01 1/2 2 200# FTH GA17H6J2 2 GATE VALVE AD1C33-01 3 12 150# FLG GA01A2J2 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION BRASS, GATE VALVE , REDUCER PORT FEMALE THRAEADED ENDS, ASTM B61, CONSTRUCTION AS PER MSS SP-80, BODY/BONNET: SCREW- OVER, STUD BOLTS: NOT REQUIRED, GASKET: **, WEDGE: SOLID TYPE, SEATS: INTEGRAL TYPE, TRIM: BRONZE, STEM: O.S. & Y, PACKING: LUBRICATED FIBER+GRAPHITE, OPERATION: HAND WHEEL, COMMENT: **, PORT OPENING: STANDARD, OTHER REQUIREMENTS ACC. MSS SP-80 CAST IRON , GATE VALVE FLANGED ENDS LONG PATTERN, ASTM A395, BODY/BONNET: SCREW-OVER, STUD BOLTS: NOT REQUIRED, GASKET: SYNTHETIC FIBERS, WEDGE: SOLID TYPE, SEATS: INTEGRAL OR RENEWABLE TYPE, TRIM: BRONZE, STEM: O.S. & Y, PACKING: LUBRICATED FIBER, OPERATION: HAND WHEEL. OTHER REQUIREMENTS: ACC TO MANUFACTURER´S STD 3 PIPE AD1C33-01 1/2 1 1/2 MTH w/ COUPLING XXS T-01 4 PIPE AD1C33-01 2 2 MTH w/ COUPLING 160 T-01 5 PIPE AD1C33-01 3 10 PE 40 T-01 6 PIPE AD1C33-01 12 12 PE STD T-01 7 ELBOW 45 DEGREES AD1C33-01 1/2 1 1/2 6000# FTH A-01 8 ELBOW 45 DEGREES AD1C33-01 2 2 3000# FTH A-01 CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, GALVANIZED AS PER A 153, SINGLE RANDOM LENGHT >2". PIPE SHALL BE SUPPLIED WITH GROOVE FOR VICTAULIC FITTINGS. CARBON STEEL, FORGED ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B16.11. GALVANIZED AS PER ASTM A153 CL. B CARBON STEEL, FORGED ELBOW 45 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B16.11. GALVANIZED AS PER ASTM A153 CL. B REQUIREMENTS: ACC. TO MANUFACTURER´S STD CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MTH w/COUPLING, GALVANIZED AS PER A 153, SINGLE RANDOM LENGHT CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MTH w/COUPLING, GALVANIZED AS PER A 153, SINGLE RANDOM LENGHT CARBON STEEL, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, GALVANIZED AS PER A 153, SINGLE RANDOM LENGHT >2". PIPE SHALL BE SUPPLIED WITH GROOVE FOR VICTAULIC FITTINGS. 9 ELBOW 45 DEGREES AD1C33-01 3 12 GROOVE ENDS ACCORDING TO PIPE SCHEDULE 10 ELBOW 90 DEGREES AD1C33-01 1/2 1 1/2 6000# FTH A-01 11 ELBOW 90 DEGREES AD1C33-01 2 2 3000# FTH A-01 12 ELBOW 90 DEGREES AD1C33-01 3 12 GROOVE ENDS ACCORDING TO PIPE SCHEDULE A-01 3/4 2 1/2 1 1/2 3/4 2 1/2 1 1/2 3 6 1 2 ACCORDING TO PIPE SCHEDULE CAST IRON, CONCENTRIC REDUCER, ASTM A 395, DIMENSIONS AS PER MANUFACTURER'S STD, GROOVE x MTH. GALVANIZED AS PER A153, N° 54 TYPE. VICTAULIC BRAND. 13 CONCENTRIC REDUCER PE x MTH A-0214 AD1C33-01 A-02ACCORDING TO PIPE SCHEDULE GROOVE x MTH CONCENTRIC REDUCER CONCENTRIC REDUCER AD1C33-01 AD1C33-01 ACCORDING TO PIPE SCHEDULEMTH x MTH 15 FERRITIC DUCTIL IRON, ELBOW 45 DEGREES, SHORT RADIUS, ASTM A395, MANUFACTURES´S STD, GROOVE ENDS, GALVANIZED AS PER A153, N° 11 TYPE. VICTAULIC BRAND. CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B16.11, GALVANIZED AS PER ASTM A153 CL. B. CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B16.11, GALVANIZED AS PER ASTM A153 CL. B. CARBON STEEL, ELBOW 90 DEGREES, ASTM A-105, DIMENSIONS AS PER MANUFACTURER'S STD, GROOVE ENDS, GALVANIZED AS PER ASTM A153, N° 10 TYPE. VICTAULIC BRAND. CARBON STEEL, WROUGHT CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, PE x MTH. GALVANIZED AS PER A153 CARBON STEEL, SEAMLESS CONCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, MTH x MTH. GALVANIZED AS PER A153 4 12 3 10 ACCORDING TO PIPE SCHEDULE CAST IRON, CONCENTRIC REDUCER, ASTM A 395, DIMENSIONS AS PER MANUFACTURER'S STD, GROOVE x MTH. GALVANIZED AS PER A153, N° 50 TYPE. VICTAULIC BRAND. CONCENTRIC REDUCER GROOVE ENDSAD1C33-0116 ECP-VST-G-GEN-FT-001 671/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 3/4 2 1/2 1 1/2 4 12 3 10 19 CAP AD1C33-01 1/2 1 1/2 6000# FTH A-02ACCORDING TO PIPE SCHEDULE17 ECCENTRIC REDUCER 18 ECCENTRIC REDUCER GROOVE ENDS MTH x MTH CARBON STEEL, WROUGHT ECCENTRIC REDUCING NIPPLE, ASTM A 234 GR. WPB, DIMENSIONS AS PER MSS-SP-95, MALE THREADED x MALE THREADED, GALVANIZED AS PER A 153. CAST IRON, ECCENTRIC REDUCER, ASTM A395, DIMENSIONS AS PER MANUFACTURER'S STD, GROOVE ENDS, GALVANIZED AS PER A 153 AD1C33-01 AD1C33-01 ACCORDING TO PIPE SCHEDULE CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT. GALVANIZED AS PER ASTM A153 CL. B CARBON STEEL, CAP, ASTM A-105, DIMENSIONS AS PER ASME B16.11, 20 CAP AD1C33-01 2 2 3000# FTH 21 CAP AD1C33-01 3 12 GROOVE ENDS ACCORDING TO PIPE SCHEDULE 22 COUPLING AD1C33-01 3 12 MECHANICAL JOINT ACCORDING TO PIPE SCHEDULE 23 COUPLING AD1C33-01 1/2 1 1/2 6000# FTH A-01 24 COUPLING AD1C33-01 1/2 1 1/2 6000# SW x FTH A-01 25 COUPLING AD1C33-01 1/2 1 1/2 6000# SW A-01 26 COUPLING AD1C33-01 2 2 3000# FTH A-01 , , , , FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT. GALVANIZED AS PER ASTM A153 CL. B CAST IRON, CAP, ASTM A395, DIMENSIONS AS PER MANUFACTURER´S STD, GROOVE ENDS. GALVANIZED AS PER ASTM A153 CL. B, N° 60 TYPE. VICTAULIC BRAND. CAST IRON, COUPLING, ASTM A395, DIMENSIONS AS PER MANUFACTURER´S STD, MECHANICAL JOINT, GALVANIZED AS PER A153, STYLE 07. VICTAULIC BRAND. CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A153 CL. B CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING ENDS AS PER ASME B16.11, GALVANIZED AS PER ASTM A153 CL. B CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11, GALVANIZED AS PER ASTM A153 CL. B CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A153 CL. B 27 COUPLING AD1C33-01 2 2 3000# SW x FTH A-01 28 COUPLING AD1C33-01 2 2 3000# SW A-01 29 EQUAL TEE AD1C33-01 1/2 1 1/2 6000# FTH A-01 30 EQUAL TEE AD1C33-01 2 2 3000# FTH A-01 31 EQUAL TEE AD1C33-01 3 12 3000# GROOVE ENDS 3/4 1 1/2 1/2 1 2 2 A-01 A 01 FTH x FTH 33 REDUCER TEE 3000# AD1C33-01 AD1C33 01 FTH x FTH REDUCER TEE 6000#32 CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING ENDS AS PER ASME B16.11, GALVANIZED AS PER ASTM A153 CL B CARBON STEEL, COUPLING, ASTM A105, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11, GALVANIZED AS PER ASTM A153 CL. B CARBON STEEL, EQUAL TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A153 CL. B. CARBON STEEL, EQUAL TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A153 CL. B. CAST IRON, EQUAL TEE, ASTM A395, DIMENSIONS AS PER MANUFACTURER´S STD, GROOVE ENDS, GALVANIZED AS PER ASTM A153 CL. B., N° 20 TYPE. VICTAULIC BRAND. CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A153 CL. B. CARBON STEEL, REDUCER TEE FEMALE, ASTM A105, DIMENSIONS AS PER ASME B16 11 FEMALE THREADED ENDS AS PER ASME B1 20 1 1/2 1 1/2 4 12 3 10 10 12 2 2 ACCORDING TO PIPE SCHEDULE ACCORDING TO PIPE SCHEDULE A-01 34 REDUCER TEE GROOVE ENDS 35 REDUCER TEE GROOVE x MTH 33 REDUCER TEE 3000#AD1C33-01 FTH x FTH AD1C33-01 AD1C33-01 PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A153 CL. B. CAST IRON, EQUAL TEE, ASTM A395, DIMENSIONS AS PER MANUFACTURER´S STD, GROOVE ENDS, GALVANIZED AS PER ASTM A153 CL. B., N° 25 TYPE. VICTAULIC BRAND. CAST IRON, EQUAL TEE, ASTM A395, DIMENSIONS AS PER MANUFACTURER´S STD, GROOVE ENDS, GALVANIZED AS PER ASTM A153 CL. B., N° 29 TYPE. VICTAULIC BRAND. FOR 2" MTHD BRANCH CONNECT ECP-VST-G-GEN-FT-001 672/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 COMPONENTS DESCRIPTION 3 8 1/2 2 37 UNION AD1C33-01 1/2 1 1/2 6000# FTH 38 UNION AD1C33-01 2 2 3000# FTH 39 NIPPLE AD1C33-01 1/2 2 MTH ACCORDING TO T-01 MECHANICAL JOINT x MTH ACCORDING TO PIPE SCHEDULEAD1C33-0136 MECHANICAL REDUCER TEE CAST IRON, EQUAL TEE, ASTM A395, DIMENSIONS AS PER MANUFACTURER´S STD, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A153 CL. B., STYLE 920N. VICTAULIC BRAND. CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A123 CARBON STEEL, UNION, ASTM A105, DIMENSIONS AS PER MSS SP-83, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, GALVANIZED AS PER ASTM A123 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER39 NIPPLE AD1C33-01 1/2 2 MTH PIPE SCHEDULE T-01 40 NIPPLE AD1C33-01 1/2 2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 41 NIPPLE AD1C33-01 1/2 2 PE ACCORDING TO PIPE SCHEDULE T-01 42 NIPPLE AD1C33-01 1/2 2 PE ACCORDING TO PIPE SCHEDULE T-01 43 NIPPLE AD1C33-01 1/2 2 PE x MTH ACCORDING TO PIPE SCHEDULE T-01 44 NIPPLE AD1C33-01 1/2 2 MTH ACCORDING TO PIPE SCHEDULE T-01 45 FLANGE AD1C33-01 1/2 2 150# FF ACCORDING TO PIPE SCHEDULE 46 GASKET AD1C33-01 1/2 2 150# FF DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, FOR L =100 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END OR THREADED END AS PER ASME B1.20.1, NPT, FOR L = 100 CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, FOR L = 100 MM CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN ENDS, FOR L = 100 MM CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, PLAIN END OR THREADED END AS PER ASME B1.20.1, NPT, FOR L = 200 mm CARBON STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-106 GR. B, DIMENSIONS AS PER ASME B36.10, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, FOR L =200 mm CARBON STEEL, THREADED FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLATE FACE FLANGED END, GALVANIZED AS PER ASTM A153 CL. B. NON METALLIC FLAT GASKET, FLAT FACE, DIMENSIONS AS PER ASME B16 21 SYNTH FIBER/NITRILE BINDER GARLOCK BLUE GARD 3000 47 GASKET AD1C33-01 3 12 150# RF E-01 48 GROOVE END FLANGE AD1C33-01 3 12 150# FF 49 BLIND FLANGE AD1C33-01 3/4 2 150# FF 50 BLIND FLANGE AD1C33-01 3/4 2 150# FF B-03 51 BLIND FLANGE AD1C33-01 3 12 150# FF B-03 CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END, GALVANIZED AS PER ASTM A153 CL. B, PROVIDED WITH 1/2" FEMAL THREADED TAPER BORE CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END, GALVANIZED AS PER ASTM A153 CL. B CARBON STEEL, BLIND FLANGE, ASTM A-105, DIMENSIONS AS PER ASME B16.5, FLAT FACE FLANGED END, GALVANIZED AS PER ASTM A153 CL. B CARBON STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS ASTM A-193 GR B7 / ASTM A 194 GR 2H THREADED B16.21, SYNTH.FIBER/NITRILE BINDER-GARLOCK BLUE GARD 3000 STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER AND CARBON STEEL EXTERNAL CENTERING RINGS, FLEXITALLIC CG THICKNESS 1/8" INCHES, AISI 304 SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5; OUTER CARBON STEEL, ASTM A105, DIMENSIONS AS PER MANUFACTURER´S STD, FLATE FACE FLANGED END, GALVANIZED AS PER ASTM A 153 CL. B, STYLE 741. VICTAULIC BRAND. 52 BOLTING AD1C33-01 P-01 HEXAGONAL NUTS, ASTM A-193 GR. B7 / ASTM A 194 GR. 2H, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 673/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: Versión1 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL / (AUSTENITIC ST. STEEL) DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 230 ASTM A312 GR. TP316L DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -150 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 230 DEMINERALIZED WATER DWA 200 195 CHEMICAL INJECTION CI 300 175 LUBE OIL LO 400 160 500 150 600 140 650 125 700 110 750 110 800 80 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 DA1A03-01 ANSI RATING PIPING MATERIAL SPECIFICATION CORROSION ALLOWANCE POR: 0 FLANGE FINISH RF ASTM A182 GR. F316L / ASTM A351 GR. CF3M / ASTM A403 GR. WP 316L / ASTM A240 GR. 316L 800 80 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 2.- ASTM A-182 GR. F304L, NOT TO BE USED OVER 800 °F ECP-VST-G-GEN-FT-001 674/761 Elaborado 25/03/11 CLASS 150 MATERIAL: REVISION: Versión1 DESIGN PRESSURE (PSIG): From: 1 STAINLESS STEEL / (AUSTENITIC ST. STEEL) DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 230 ASTM A312 GR. TP316L DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -150 To: 150 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Versión 1 DA1A03-01 ANSI RATING PIPING MATERIAL SPECIFICATION CORROSION ALLOWANCE POR: 0 FLANGE FINISH RF ASTM A182 GR. F316L / ASTM A351 GR. CF3M / ASTM A403 GR. WP 316L / ASTM A240 GR. 316L ECP-VST-G-GEN-FT-001 675/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG 1 GATE VALVE DA1A03-01 1/2 2 800# SW GA04F5K2 STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L) BODY, ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 2 GATE VALVE DA1A03-01 3 6 150# RF GA01A5K1 3 CHECK VALVE DA1A03-01 1/2 2 800# SW CLO4F5K2 OPERATOR STAINLESS STEEL, GATE VALVE, FB, ASTM A-351 GR. CF3M (AISI 316L) BODY, ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR. STAINLESS STEEL, (LIFT) SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L) BODY, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT. ACC. TO API 602 4 CHECK VALVE DA1A03-01 3 6 150# RF CK01A5K1 5 GLOBE VALVE DA1A03-01 1/2 2 800# SW GL04F5K2 STAINLESS STEEL, SWING CHECK VALVE, FB, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3M (AISI 316L) BODY, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L) BODY, RB, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL. ACC. TO API 602. ECP-VST-G-GEN-FT-001 676/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 6 GLOBE VALVE DA1A03-01 3 6 150# RF GL01A5K2 STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3M (AISI 316L) BODY, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34/BS 1873, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING 7 BALL VALVE DA1A03-01 1/2 1 1/2 800# PE x FTH BA04K5I1J 8 BALL VALVE (PSIG) 1/2 1 1/2 800# PE BA04G5I2J STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR STAINLESS STEEL, BALL VALVE EXT. FEMALE END WITH 1 NIP FB, ASTM A182 GR. F316L BODY, ACCORDING TO BS 5351, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: FLOATING TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, PLAIN END, FEMALE THREADED END AS PER ASME B1.20.1 STAINLESS STEEL, BALL VALVE EXT. FEMALE END WITH 2 NIP FB, ASTM A182 GR. F316L BODY, ACCORDING TO ASME B16.34, BODY: 2 - 3 PIECES - SPLIT BODY, INSERT SEATS & SEALS: VITON, BALL: AISI 316, STEM: AISI 316 - ANTI BLOW OUT, SEATS: VITON, ARRANGEMENT: FLOATING TYPE, FIRE SAFE: API 607/ API 6FA, OPERATION: LEVER, COMMENT: API 598 TEST, PLAIN ENDS 9 PIPE DA1A03-01 1/2 1 1/2 PE 80S 10 PIPE 2 2 BE 80S 11 PIPE DA1A03-01 3 6 BE 40S 12 ELBOW 45 DEGREES DA1A03-01 1/2 1 1/2 3000# SW 13 ELBOW 45 DEGREES DA1A03-01 2 6 BW ACCORDING TO PIPE SCHEDULE 14 ELBOW 90 DEGREES DA1A03 01 1/2 1 1/2 3000# SW STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16 11 SOCKET WELDING ENDS AS PER STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 14 ELBOW 90 DEGREES DA1A03-01 1/2 1 1/2 3000# SW DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 ECP-VST-G-GEN-FT-001 677/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 15 ELBOW 90 DEGREES DA1A03-01 2 6 BW ACCORDING TO PIPE SCHEDULE 3/4 2 1/2 1 1/2 STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 CONCENTRIC REDUCER DA1A03-01 ACCORDING TO PIPE SCHEDULE 16 1/2 1 1/2 1/2 1 1/2 1/2 3/4 3/4 1 1/2 1/2 3/4 3/4 1 1/2 1/2 3/4 3 6 2 4 3/4 2 STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 316L, STAINLESS STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A403 GR. WP316L, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS STAINLESS STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A403 GR. WP316L, DIMENSIONS AS PER MSS SP-95, MALE THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 , DA1A03-01 17 DA1A03-01 BW x MTH ACCORDING TO PIPE SCHEDULE 19 CONCENTRIC REDUCER 18 CONCENTRIC REDUCER DA1A03-01 PE x MTH ACCORDING TO PIPE SCHEDULE PE x PE ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A403 GR. WP316L, DIMENSIONS AS PER MSS SP-95, MALE THREADED END AS PER ASME B1.20.1, PLAIN END CONCENTRIC REDUCER 20 CONCENTRIC REDUCER DA1A03-01 BW ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ACCORDING3/4 2 1/2 1 1/2 3 6 2 4 23 REDUCER INSERT DA1A03-01 1/2 2 3000# MxF 24 CAP DA1A03-01 1/2 2 3000# THD STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 21 ECCENTRIC REDUCER DA1A03-01 ACCORDING TO PIPE SCHEDULE 22 ECCENTRIC REDUCER DA1A03-01 BW ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 678/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 25 CAP DA1A03-01 1/2 1 1/2 3000# SW 26 CAP DA1A03-01 2 6 BW ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL STRAIGHT TEE ASTM A 182 GR F316L STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 27 STRAIGHT TEE DA1A03-01 1/2 1 1/2 3000# SW 3/4 1 1/2 1/2 1 29 STRAIGHT TEE DA1A03-01 2 6 BW ACCORDING TO PIPE SCHEDULE 2 6 1 1/2 4 1/2 2 1/2 1 1/2 1/2 2 1/2 1 1/2 OLET DA1A03-01 3000# THD 30 REDUCER TEE DA1A03-01 BW STAINLESS STEEL, STRAIGHT TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, STRAIGHT TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 28 REDUCER TEE DA1A03-01 3000# SW STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 3000# SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 31 32 OLET DA1A03-01 2 6 1 1/2 4 34 PLUG DA1A03-01 1/2 2 3000# THD 35 COUPLING DA1A03-01 1/2 2 3000# THD 36 COUPLING DA1A03-01 1/2 1 1/2 3000# SW x FTH 37 COUPLING DA1A03-01 1/2 2 3000# SW STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED END AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 33 OLET DA1A03-01 BW ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 ECP-VST-G-GEN-FT-001 679/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 38 HALF COUPLING DA1A03-01 1/2 2 3000# THD 39 HALF COUPLING DA1A03-01 1/2 1 1/2 3000# PE x SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT STAINLESS STEEL, HALF COUPLING, ASTM A182 GR. F316L, DIMENSIONS AS PER ASME B16.11, PLAIN END, SOCKET WELDING END AS PER ASME B16.11 40 HALF COUPLING DA1A03-01 1/2 2 3000# SW 41 NIPPLE DA1A03-01 1/2 2 THD ACCORDING TO PIPE SCHEDULE 42 NIPPLE DA1A03-01 1/2 1 1/2 PE x MTH ACCORDING TO PIPE SCHEDULE 43 NIPPLE DA1A03-01 1/2 2 PE ACCORDING TO PIPE SCHEDULE 44 FLANGE DA1A03-01 1/2 2 150# RF ACCORDING TO PIPE SCHEDULE ACCORDING STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, L = 100mm STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, PLAIN END, L = 100mm, 200mm STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS, L = 100mm, 150mm, 200mm STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END STAINLESS STEEL WELDING NECK FLANGE ASTM A 182 GR F316L 45 FLANGE DA1A03-01 3 6 150# RF ACCORDING TO PIPE SCHEDULE 46 FLANGE DA1A03-01 1/2 1 1/2 300# RF ACCORDING TO PIPE SCHEDULE 47 FLANGE DA1A03-01 2 2 300# RF ACCORDING TO PIPE SCHEDULE 48 FLANGE DA1A03-01 1/2 1 1/2 600# RF ACCORDING TO PIPE SCHEDULE 49 FLANGE DA1A03-01 2 2 600# RF ACCORDING TO PIPE SCHEDULE 50 BLIND FLANGE DA1A03 01 1/2 6 150# RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L, STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END, FLG x SW STAINLESS STEEL, WELDING NECK FLANGE, ASTM A182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END, FLG x BW STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END, FLG x SW STAINLESS STEEL, WELDING NECK FLANGE, ASTM A182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END, FLG x BW STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 50 BLIND FLANGE DA1A03-01 1/2 6 150# RF DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 680/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión 1 51 BLIND FLANGE DA1A03-01 3/4 2 150# RF STAINLESS STEEL, BLIND FLANGE, ASTM A182 GR. F316L, DIMENSIONS AS PER MANUFACTURER´S STD / FLG CONN. FOR ASME B16.5, RAISED FACE FLANGED END, PROVIDED WITH 1/2" TAPER BORE STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A- 182 GR F316L DIMENSIONS AS PER ASME B16 36 GENERAL 52 ORIFICE FLANGE DA1A03-01 1 1/2 2 300# RF 53 ORIFICE FLANGE DA1A03-01 3 6 300# RF 54 FIGURE 8 DA1A03-01 1/2 6 150# RF 55 DRIP RINGS DA1A03-01 2 6 150# RF 182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 316L DIMENSIONS AS PER ASME B16 5 RAISED FACE ENDS 56 GASKET DA1A03-01 1/2 6 150# RF 57 GASKET DA1A03-01 1/2 2 300# RF E-01 58 GASKET DA1A03-01 1/2 2 600# RF E-01 59 BOLTING DA1A03-01 STAINLESS STEEL, SPIRAL WOUND GASKET AISI 304 SS, WITH GRAPHITE FILLER AND OUTER RING, FLEXITALLIC CG THICKNESS 1/8" INCHES, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A-193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316L SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 STAINLESS STEEL, SPIRAL WOUND GASKET AISI 304 SS, WITH GRAPHITE FILLER AND OUTER RING, FLEXITALLIC CG THICKNESS 1/8" INCHES, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 681/761 Ite m PIPING ELEMENT CLAS S DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS 1 GATE VALVE K1A0 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 230 100 A182 GR F316L 1/100TYPE 316L STELLITE INTEGRA L AISI 316L SPIRAL WOUND BONNET GASKET SOLID ANDWHEEL K0-1F 1/2 - 1 1/2 800 275 150 A182 GR F316L 0 316L STELLIT E STELLITE RENEWAB LE SEAT RINGS AISI 316L SPIRAL WOUND BONNET GASKET SOLID HANDWHEEL VCS-100 SW - GATE VALVE RP FEMALE ENDS RB Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol 2 GATE VALVE K1A0 3 6 150 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3M (AISI 316L), ACCORDING TO API 603, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE 230 100 A351 GR.CF3M 1/100TYPE 316L STELLITE RENEWA BLE SEAT RINGS AISI 316L SPIRAL WOUND BONNET GASKET FLEXIBLEANDWHEEL K0-1F 2 150 275 150 A351 GR.CF3M 0 316L STELLIT E STELLITE RENEWAB LE SEAT RINGS AISI 316L SPIRAL WOUND BONNET GASKET FLEXIBL E HANDWHE EL VCS-200 GATE VALVE LP Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol, de 3" a 6" Versión 1 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION ECOPETROL REFINERÍA CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 , , WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL GASKET GASKET 3 CHECK VALVE K1A0 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, . 230 100 A182 GR F316L 1/100TYPE 316L STELLITE INTEGRA L AISI 316L SPIRAL WOUND BONNET GASKET K0-1F 1/2 - 1 1/2 800 275 150 A182 GR F316L 0 F6 STELLIT E (API N. 8 ) REDUCER STELLITE RENEWAB LE SEAT RINGS AISI 316L SPIRAL WOUND BONNET GASKET VRS - 100 SW - CHECK VALVE LIFT FEM. ENDS RB Diferencia en rango de Diámetros. Se escoge el rango de Diámetros de Ecopetrol 4 CHECK VALVE K1A0 3 6 150 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 230 100 A351 GR.CF3M 1/100TYPE 316L STELLITE RENEWA BLE SEAT RINGS AISI 316L SPIRAL WOUND BONNET GASKET K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 5 GLOBE VALVE K1A0 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET OUTSIDE SCREW AND YOKE SWIVEL DISC 230 100 A182 GR F316L 1/100TYPE 316L STELLITE INTEGRA L AISI 316L SPIRAL WOUND BONNET HANDWHEEL K0-1F 1/2 - 1 1/2 800 275 150 A182 GR F316L 0 316L STELLIT E REDUC ER STELLITE RENEWAB LE SEAT RINGS AISI 316L SPIRAL WOUND BONNET HANDWHE EL VGS-100 SW - GLOBE VALVE RP FEMALE ENDS RB BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL BONNET GASKET RINGS BONNET GASKET 6 GLOBE VALVE K1A0 3 6 150 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 230 100 A351 GR.CF3M 1/100TYPE 316L STELLITE RENEWA BLE SEAT RINGS AISI 316L SPIRAL WOUND BONNET GASKET HANDWHEEL K0-1F 2 150 275 150 A351 GR.CF3M 0 316L STELLIT E STELLITE RENEWAB LE SEAT RINGS AISI 316L SPIRAL WOUND BONNET GASKET HANDWHE EL VGS-200 RF - GLOBE VALVE LP ECP-VST-G-GEN-FT-001 682/761 Ite m PIPING ELEMENT CLAS S DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS Versión 1 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION ECOPETROL REFINERÍA CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 BALL VALVE K0-1F 1/2 - 1 1/2 800 275 150 A182 GR F316L 0 FULL VITON AISI 316 - FULL PORT FLOATING LEVER VBS-100F PE x FTH - BALL VALVE EXT. FEM. END W / 1 NIP FB INCLUIR BALL VALVE K0-1F 1/2 - 1 1/2 800 275 150 A182 GR F316L 0 REDUC ER VITON AISI 316 - REDUCER PORT FLOATING LEVER VBS-100 PE - BALL VALVE EXT. FEM. END W / 2 NIP RB INCLUIR 7 PIPE K1A0 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 230 100 A312 GR. TP316L1/100 K0-1F 1/2 - 1 1/2 S 80S - (1/2 - 1 1/2 275 150 STM A312 TP 316 0 PE - SEAMLESS Diferencias en: Rango de Diámetros. Dejar el rango de diámetros de Ecopetrol 8 PIPE K1A0 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 230 100 A312 GR. TP316L1/100 K0-1F 2 S 80S - (2) 275 150 STM A312 TP 316 0 BE - SEAMLESS Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol, de 3" a 6" 9 ELBOW 45 DEGREES K1A0 1/2 2 3000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 SW - 45 DEGREE ELBOW FEMALE END Diferencias en: Rango de Diámetros. Dejar el rango de diámetros de Ecopetrol STAINLESS STEEL ELBOW 45 DEGREES LONG 10 ELBOW 45 DEGREES K1A0 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 230 100 A403 GR.WP316L1/100 K0-1F 2 275 150 A403 GR.WP316L 0 BW - 45 DEGREE ELBOW LR Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol, de 3" a 6" 11 ELBOW 90 DEGREES K1A0 1/2 2 3000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 SW - 90 DEGREE ELBOW FEMALE END Diferencias en: Rango de Diámetros. Dejar el rango de diámetros de Ecopetrol 12 ELBOW 90 DEGREES K1A0 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 230 100 A403 GR.WP316L1/100 K0-1F 2 275 150 A403 GR.WP316L 0 BW - 90 DEGREE ELBOW LR Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol, de 3" a 6" 13 CONCENTRIC REDUC K1A0 1/2 2 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 230 100 A403 GR.WP316L1/100 K0-1F 275 150 A403 GR.WP316L 0 NO EXISTE EN ESTA CLASE CONCENTRIC REDUCER K0-1F 1/2 - 1 1/2 275 150 A403 GR.WP316L 0 BW x MTH - CONCENTRIC REDUCING NIPPLE INCLUIR CONCENTRIC REDUCER K0-1F 3/4 - 1 1/2 275 150 A403 GR.WP316L 0 PE x PE - CONCENTRIC INCLUIR CONCENTRIC REDUCER K0-1F 3/4 - 1 1/2 275 150 A403 GR.WP316L 0 PE x MTH - CONCENTRIC REDUCING NIPPLE INCLUIR 14 CONCENTRIC REDUC K1A0 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 230 100 A403 GR.WP316L1/100 K0-1F 275 150 A403 GR.WP316L 0 NO EXISTE EN ESTA CLASE 15 ECCENTRIC REDUCE K1A0 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN 230 100 A403 GR WP316L1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE15 ECCENTRIC REDUCE K1A0 1/2 2 80S END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 230 100 A403 GR.WP316L1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 16 ECCENTRIC REDUCE K1A0 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 230 100 A403 GR.WP316L1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 17 REDUCER INSERT K1A0 1/2 2 3000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 18 CAP K1A0 1/2 2 3000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 FTH - CAP FORGED Diferencias en: Rango de Diámetros. Dejar el rango de diámetros de Ecopetrol 19 CAP K1A0 1/2 2 3000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 SW - CAP FORGED Diferencias en: Rango de Diámetros. Dejar el rango de diámetros de Ecopetrol 20 CAP K1A0 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 230 100 A403 GR.WP316L1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 21 STRAIGHT AND REDU K1A0 1/2 2 3000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 Diferencias en: Rango de diámetros. Utilizar los datos de Ecopetrol 22 STRAIGHT AND REDU K1A0 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 230 100 A403 GR.WP316L1/100 K0-1F 2 275 150 A403 GR.WP316L 0 No existe reducer tee para este diámetro. Utilizar los datos de Ecopetrol Diferencias en: Rango de Diámetros. Dejar el rango de diámetros de 3" a 6" 23 OLET K1A0 1/2 2 3000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE ECP-VST-G-GEN-FT-001 683/761 Ite m PIPING ELEMENT CLAS S DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS Versión 1 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION ECOPETROL REFINERÍA CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 24 OLET K1A0 1/2 2 3000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 25 OLET K1A0 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, BEVELED 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 26 PLUG K1A0 1/2 2 3000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 275 150 A182 GR F316L 0 MTH - ROUND HEAD TYPE Diferencias en: Rango de Diámetros. Utilizar los datos de Ecopetrol 27 COUPLING K1A0 1/2 2 3000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 FTH Diferenicas en: Rango de Diámetros. Utilizar los valores de Ecopetrol COUPLING K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 COUPLING - SW x FTH INCLUIR 28 COUPLING K1A0 1/2 2 3000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 SW Diferenicas en: Rango de Diámetros. Utilizar los valores de Ecopetrol 29 HALF COUPLING K1A0 1/2 2 3000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L DIMENSIONS AS PER ASME B16 11 FEMALE 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE29 HALF COUPLING K1A0 1/2 2 3000 THD F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE HALF COUPLING K0-1F 1/2 - 1 1/2 3000 275 150 A182 GR F316L 0 HALF COUPLING - PE x SW INCLUIR 30 HALF COUPLING K1A0 1/2 2 3000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 31 NIPPLE K1A0 1/2 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 230 100 A312 GR. TP316L1/100 K0-1F 1/2 - 1 1/2 275 150 A312 GR. TP316L 0 MTH - SEAMLESS - L =100mm Aumentar el rango de Diámetros hasta 2" NIPPLE K0-1F 1/2 - 1 1/2 275 150 A312 GR. TP316L 0 PE x MTH - SEAMLESS - L = 100, 200mm INCLUIR 32 NIPPLE K1A0 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, 230 100 A312 GR. TP316L1/100 K0-1F 1/2 - 1 1/2 275 150 A312 GR. TP316L 0 PE - SEAMLESS - L = 100, 150, 200 mm Aumentar el rango de Diámetros hasta 2" 33 FLANGE K1A0 1/2 2 150 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 1 1/2 150 275 150 A182 GR F316L 0 RF - FLG x SW - Socketweld flange Utilizar el rango de Díametros de Ecopetrol 34 FLANGE K1A0 3 6 150 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 230 100 A182 GR F316L 1/100 K0-1F 2 150 275 150 A182 GR F316L 0 RF - FLG x BW - Weldneck flange Utilizar el rango de Díametros de Ecopetrol FLANGE K0-1F 1/2 - 1 1/2 300 275 150 A182 GR F316L 0 RF - FLG x SW - Socketweld flange INCLUIR FLANGE K0-1F 2 300 275 150 A182 GR F316L 0 RF - FLG x BW - Weldneck flange INCLUIR FLANGE K0-1F 1/2 - 1 1/2 600 275 150 A182 GR F316L 0 RF - FLG x SW - Socketweld flange INCLUIR FLANGE K0-1F 2 600 275 150 A182 GR F316L 0 RF - FLG x BW - Weldneck flange INCLUIR 35 BLIND FLANGE K1A0 1/2 6 150 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L DIMENSIONS AS PER ASME B16 5 RAISED 230 100 A182 GR F316L 1/100 K0 1F 1/2 2 150 275 150 A182 GR F316L 0 Diferencias en: Rango de Diámetros Utilizar los datos de35 BLIND FLANGE K1A0 1/2 6 150 RF F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 230 100 A182 GR F316L 1/100 K0-1F 1/2 - 2 150 275 150 A182 GR. F316L 0 Diámetros. Utilizar los datos de Ecopetrol BLIND FLANGE K0-1F 3/4 - 2 150 275 150 A182 GR. F316L 0 BLINDS PROVIDED WITH 1/2" TAPER BORE INCLUIR ECP-VST-G-GEN-FT-001 684/761 Ite m PIPING ELEMENT CLAS S DN from (in) DN to (in) RATIN G FACE SCHEDUL E COMPONENTS DESCRIPTION PRES S TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PLUG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS Versión 1 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES PIPING MATERIAL SPECIFICATION ECOPETROL REFINERÍA CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 36 ORIFICE FLANGE K1A0 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A- 194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 37 ORIFICE FLANGE K1A0 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A- 194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 230 100 A182 GR F316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 38 FIGURE 8 K1A0 1/2 6 150 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 316L DIMENSIONS AS PER ASME B16 5 RAISED FACE 230 100 A240 GR 316L 1/100 K0 1F 1/2 2 150 275 150 A240 GR 316L 0 WAFER JOINT TYPE Diferencias en: Rango de Diámetros Utilizar el rango de38 FIGURE 8 K1A0 1/2 6 150 RF 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 230 100 A240 GR. 316L 1/100 K0-1F 1/2 - 2 150 275 150 A240 GR. 316L 0 WAFER JOINT TYPE Diámetros. Utilizar el rango de Diámetros de Ecopetrol 39 DRIP RINGS K1A0 2 6 150 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 230 100 A240 GR. 316L 1/100 K0-1F 275 150 0 NO EXISTE EN ESTA CLASE 40 GASKET K1A0 1/2 6 150 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316L SS S O S S S S O 230 100 AISI 316L SS 1/100 K0-1F 1/2 - 2 150 275 150 AISI 316L SS 0 SPIRAL WOUND/GRAPHITE - FLEXITALLIC CG, 1/8" Diferencias en: Rango de Diámetros. Utilizar el rango de Diámetros de Ecopetrol GASKET K0-1F 1/2 - 2 300 275 150 AISI 316L SS 0 INCLUIR GASKET K0-1F 1/2 - 2 600 275 150 AISI 316L SS 0 INCLUIR 41 BOLTING K1A0 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE 230 100 STUD BOLTS: A193 GR. B16 / NUTS: A194 1/100 K0-1F 275 150 STUD BOLTS: A193 GR. B16 / NUTS: A194 0 NOTES: AMARILLO GRIS OSCUPO GRIS CLARO BLANCO ITEMS NUEVOS EN CLASES CONTRATO MARCO ITEMS QUE NO EXISTEN EN CLASES CONTRATO ITEMS QUE HAY DIFERENCIA CON RELACION A CLASES REFINERIA ITEMS QUE SON IGUALES ECP-VST-G-GEN-FT-001 685/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: Versión1 DESIGN PRESSURE (PSIG): From: 0 STAINLESS STEEL / (AUSTENITIC STAINLESS STEEL) DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 550 ASTM A312 GR. TP316L DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -150 To: 150 DESIGN LIMITS Class Temperature 150# 300# 600# 900# 1500# SERVICE REFERENCE NOTES (°F) (PSIG) (PSIG) (PSIG) (PSIG) (PSIG) -20 to 100 600 CHEMICAL INJECTION CI 200 510 300 455 400 420 500 395 600 370 650 365 700 360 750 355 800 345 NOTES: 1.- DESIGN LIMITS ACCORDING TO ASME B16.5, FLANGE RATING MATERIAL GROUP 2.3 Versión 1 DA2A03-01 ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 CORROSION ALLOWANCE POR: 0 FLANGE FINISH RF ASTM A182 GR. F316L / ASTM A351 GR. CF3M / ASTM A403 GR. WP 316L / ASTM A240 GR. 316L ECP-VST-G-GEN-FT-001 686/761 Elaborado 25/03/11 CLASS 300 MATERIAL: REV: Versión1 DESIGN PRESSURE (PSIG): From: 0 STAINLESS STEEL / (AUSTENITIC STAINLESS STEEL) DESCRIPTION Emisión Final Incluidos Comentarios de Ecopetrol To: 550 ASTM A312 GR. TP316L DATE: 07-Feb-2011 DESIGN TEMPERATURE (°F): From: -150 To: 150 Versión 1 DA2A03-01 ANSI RATING PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 CORROSION ALLOWANCE POR: 0 FLANGE FINISH RF ASTM A182 GR. F316L / ASTM A351 GR. CF3M / ASTM A403 GR. WP 316L / ASTM A240 GR. 316L ECP-VST-G-GEN-FT-001 687/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG VALVE 1 GATE VALVE DA2A03-01 1/2 2 800 SW GA04F5K2 COMPONENTS DESCRIPTION STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 2 GATE VALVE DA2A03-01 3 6 300 RF GA02A5K1 , , GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3M (AISI 316L), ACCORDING TO API 600, FB, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR STAINLESS STEEL, (LIFT) SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L 3 CHECK VALVE DA2A03-01 1/2 2 800 SW CLO4F5K2 (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, ACC. TO API 602 ECP-VST-G-GEN-FT-001 688/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG VALVE COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 4 CHECK VALVE DA2A03-01 3 6 300 RF CK02A5K1 STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, 5 GLOBE VALVE DA2A03-01 1/2 2 800 SW GL04F5K2 STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RB, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34/BS 1873, TESTS AS PER API 598, TRIM BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), RB, DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR 6 GLOBE VALVE DA2A03-01 3 6 300 RF GL02A5K2TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL OPERATOR ECP-VST-G-GEN-FT-001 689/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG VALVE COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 7 PIPE DA2A03-01 1/2 1 1/2 PE 80S 8 PIPE DA2A03-01 2 2 BE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 9 PIPE DA2A03-01 3 6 BE 40S 10 ELBOW 45 DEGREES DA2A03-01 1/2 2 6000 SW 11 ELBOW 45 DEGREES DA2A03-01 3 6 BW ACCORDING TO PIPE SCHEDULE 12 ELBOW 90 DEGREES DA2A03-01 1/2 2 6000 SW 13 ELBOW 90 DEGREES DA2A03-01 3 6 BW ACCORDING TO PIPE STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 , , GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS 13 ELBOW 90 DEGREES DA2A03 01 3 6 BW TO PIPE SCHEDULE , , PER ASME B16.9, BEVELED ENDS AS PER ASME B16 25 ECP-VST-G-GEN-FT-001 690/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG VALVE COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 1/2 2 1/2 1 1/2 1/2 1 1/2 BW x PE ACCORDING TO PIPE SCHEDULE ACCORDING CONCENTRIC REDUCER STAINLESS STEEL, CONCENTRIC REDUCING DA2A03-0114 STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 1/2 1 1/2 1/2 3/4 3/4 1 1/2 1/2 1 3/4 1 1/2 1/2 1 3 6 2 4 1/2 2 1/2 1 1/2 3 6 CONCENTRIC REDUCER PE x MTH BW x MTH ACCORDING TO PIPE SCHEDULE 15 CONCENTRIC REDUCER DA2A03-01 ACCORDING TO PIPE SCHEDULE PE x PE ACCORDING TO PIPE SCHEDULE CONCENTRIC REDUCER DA2A03-01 , NIPPLE, ASTM A403 GR. WP316L, DIMENSIONS AS PER MSS SP-95, MALE THREADED END AS PER ASME B1.20.1, BEVELED END AS PER ASME B16.25 STAINLESS STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A403 GR. WP316L, DIMENSIONS AS PER MSS SP-95, PLAIN ENDS 17 DA2A03-0116 STAINLESS STEEL, CONCENTRIC REDUCING NIPPLE, ASTM A403 GR. WP316L, DIMENSIONS AS PER MSS SP-95, MALE THREADED END AS PER ASME B1 20 1 PLAIN END STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 CONCENTRIC REDUCER DA2A03-01 BW ACCORDING TO PIPE SCHEDULE 19 ECCENTRIC REDUCER DA2A03-01 ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1 20 1 OR BEVELED END AS PER ASME B16 25 18 ECCENTRIC REDUCER DA2A03 01 BW ACCORDING TO PIPE STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR WP 316L DIMENSIONS AS PER ASME20 2 4 21 REDUCER INSERT DA2A03-01 1/2 2 6000 MxF 22 CAP DA2A03-01 1/2 2 6000 THD STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ECCENTRIC REDUCER DA2A03-01 BW TO PIPE SCHEDULE 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 20 ECP-VST-G-GEN-FT-001 691/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG VALVE COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 23 CAP DA2A03-01 1/2 2 6000 SW 24 CAP DA2A03-01 3 6 BW ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 STAINLESS STEEL, STRAIGHT TEE, ASTM A-182 25 STRAIGHT TEE DA2A03-01 1/2 2 6000 SW 26 STRAIGHT TEE DA2A03-01 1/2 1 1/2 3000 SW 3/4 2 1/2 1 3/4 1 1/2 1/2 1 29 STRAIGHT TEE DA2A03-01 2 6 BW ACCORDING TO PIPE SCHEDULE 28 REDUCER TEE DA2A03-01 3000 SW GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, STRAIGHT TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, STRAIGHT TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 27 REDUCER TEE DA2A03-01 6000 SW STAINLESS STEEL, REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 3 6 2 4 1/2 2 1/2 1 1/2 STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 30 REDUCER TEE DA2A03-01 BW 31 OLET DA2A03-01 6000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT ACCORDING TO PIPE SCHEDULE ECP-VST-G-GEN-FT-001 692/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG VALVE COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 1/2 2 1/2 1 1/2 3 6 2 4 STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 6000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 32 33 OLET DA2A03-01 BW ACCORDING TO PIPE SCHEDULE OLET DA2A03-01 34 PLUG DA2A03-01 1/2 2 6000 THD 35 COUPLING DA2A03-01 1/2 2 6000 THD 36 COUPLING DA2A03-01 1/2 1 1/2 3000 SW x FTH 37 COUPLING DA2A03-01 1/2 2 6000 SW STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE THREADED ENDS AS PER ASME B1.20.1, NPT STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT, SOCKET WELDING END AS PER ASME B16.11 STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET 37 COUPLING DA2A03 01 1/2 2 6000 SW 38 HALF COUPLING DA2A03-01 1/2 2 6000 THD 39 HALF COUPLING DA2A03-01 1/2 1 1/2 3000 PE x SW F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, PLAIN END, SOCKET WELDING END AS PER ASME B16 11 ECP-VST-G-GEN-FT-001 693/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG VALVE COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 40 HALF COUPLING DA2A03-01 1/2 2 6000 SW 41 NIPPLE DA2A03-01 1/2 2 THD ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME SCHEDULE 42 NIPPLE DA2A03-01 1/2 1 1/2 PE x MTH ACCORDING TO PIPE SCHEDULE 43 NIPPLE DA2A03-01 1/2 2 PE ACCORDING TO PIPE SCHEDULE 44 FLANGE DA2A03-01 1/2 2 300 RF ACCORDING TO PIPE SCHEDULE 45 FLANGE DA2A03-01 3 6 300 RF ACCORDING TO PIPE SCHEDULE B1.20.1, NPT STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT, PLAIN END, FOR L = 100mm, 200mm STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 46 FLANGE DA2A03-01 2 2 600 RF ACCORDING TO PIPE SCHEDULE 47 BLIND FLANGE DA2A03-01 1/2 6 300 RF 48 BLIND FLANGE DA2A03-01 3/4 2 300 RF STAINLESS STEEL, WELDING NECK FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER MANUFACTURER´S STD / FLG CONN. FOR ASME B16.5, RAISED FACE FLANGED END ECP-VST-G-GEN-FT-001 694/761 Item PIPING ELEMENT CLASS DN from (in) DN to (in) RATING FACE SCHEDULE TAG VALVE COMPONENTS DESCRIPTION PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES Versión 1 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 49 ORIFICE FLANGE DA2A03-01 1 1/2 2 300 RF ACCORDING TO PIPE SCHEDULE STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A 182 GR F316L 50 ORIFICE FLANGE DA2A03-01 3 6 300 RF ACCORDING TO PIPE SCHEDULE 51 FIGURE 8 DA2A03-01 1/2 6 300 RF 52 DRIP RINGS DA2A03-01 2 6 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS AND PLUGS ASTM A-182 GR. F316L. 52 DRIP RINGS DA2A03-01 2 6 300 RF 53 GASKET DA2A03-01 1/2 6 300 RF E-01 54 BOLTING DA2A03-01 ASME B1.20.1, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316L SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 ECP-VST-G-GEN-FT-001 695/761 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION PRE SS TEM P MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PL UG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS 1 GATE VALVE K2A1 1/2 2 800 SW STAINLESS STEEL, GATE VALVE, ASTM A-182 GR. F316L (AISI 316L), ACCORDING TO API 602, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SOLID WEDGE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 600 100 A182 GR F316L (AISI 316L) 0,0625 TYPE 316L STELLITE INTEGRA L AISI 316L SPIRAL WOUND BONNE T GASKET SOLID HANDWHEEL K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 2 GATE VALVE K2A1 3 6 300 RF STAINLESS STEEL, GATE VALVE, ASTM A-351 GR. CF3M (AISI 316L), ACCORDING TO API 600, DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT 600 100 A351 GR CF3M 0,0625 TYPE 316L STELLITE RENEWA BLE SEAT RINGS AISI 316L SPIRAL WOUND BONNE T GASKET FLEXIBLEHANDWHEEL K0-3F 550 150 0 NO EXISTE EN ESTA CLASE Versión 1 ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 FLEXIBLE WEDGE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL GASKET 3 CHECK VALVE K2A1 1/2 2 800 SW STAINLESS STEEL, SPRING BALL CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE INTEGRAL SEAT, . 600 100 A182 GR F316L (AISI 316L) 0,0625 TYPE 316L STELLITE INTEGRA L AISI 316L SPIRAL WOUND BONNE T GASKET K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 4 CHECK VALVE K2A1 3 6 300 RF STAINLESS STEEL, SWING CHECK VALVE, SUITABLE FOR HORIZONTAL AND VERTICAL INSTALLATION, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED CAP, STELLITE RENEWABLE SEAT RINGS, . 600 100 A351 GR CF3M 0,0625 TYPE 316L STELLITE RENEWA BLE SEAT RINGS AISI 316L SPIRAL WOUND BONNE T GASKET K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 5 GLOBE VALVE K2A1 1/2 2 800 SW STAINLESS STEEL, GLOBE VALVE, ASTM A-182 GR. F316L (AISI 316L), DIMENSIONS AS PER ASME B16.10, SOCKET WELDING ENDS AS PER ASME B16.11, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET OUTSIDE SCREW AND YOKE 600 100 A182 GR F316L (AISI 316L) 0,0625 TYPE 316L STELLITE INTEGRA L AISI 316L SPIRAL WOUND BONNE HANDWHEEL K0-3F 550 150 0 NO EXISTE EN ESTA CLASE BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE INTEGRAL SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL T GASKET 6 GLOBE VALVE K2A1 3 6 300 RF STAINLESS STEEL, GLOBE VALVE, ASTM A-351 GR. CF3M (AISI 316L), DIMENSIONS AS PER ASME B16.10, RAISED FACE FLANGED ENDS, RATING AS PER ASME B16.5, CONSTRUCTION AS PER ASME B16.34, TESTS AS PER API 598, TRIM TYPE 316L, AISI 316L SPIRAL WOUND BONNET GASKET GRAPHITE FILLER, BOLTED BONNET, OUTSIDE SCREW AND YOKE, SWIVEL DISC PLUG TYPE, STELLITE RENEWABLE SEAT RINGS, GRAPHITE STEM PACKING REPLACEABLE UNDER PRESSURE, HANDWHEEL 600 100 A351 GR CF3M 0,0625 TYPE 316L STELLITE RENEWA BLE SEAT RINGS AISI 316L SPIRAL WOUND BONNE T GASKET HANDWHEEL K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 7 PIPE K2A1 1/2 2 PE 80S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 600 100 A312 TP316L 0,0625 K0-3F 1/2 - 1 1/2 S 80S - (1/2 - 1 1/ 550 150 A312 TP316L 0 PE - SEAMLESS Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol 8 PIPE K2A1 3 6 BE 40S STAINLESS STEEL, SEAMLESS PIPE, ASTM A-312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, BEVELED ENDS AS PER ASME B16.25 600 100 A312 TP316L 0,0625 K0-3F 2 S 80S - (2) 550 150 A312 TP316L 0 BE - SEAMLESS - DOUBLE RANDOM LENGHT >= 2" Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol, de 3" a 6" 9 ELBOW 45 DEGREES K2A1 1/2 2 6000 SW STAINLESS STEEL, ELBOW 45 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 600 100 A182 GR F316L 0,0625 K0-3F 1/2 - 1 1/2 3000 550 150 A182 GR. F316 0 SW - 45 DEGREE ELBOW FEMALE END Diferencias en: Diámetros y Rating. Se escoge el Rating y rango de diámetros de Ecopetrol 10 ELBOW 45 DEGREES K2A1 3 6 BW 40S STAINLESS STEEL, ELBOW 45 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 600 100 A403 GR. WP 316L 0,0625 K0-3F 2 550 150 03 GR. WP31 0 BW - 45 DEGREE ELBOW LONG RADIUS Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol, de 3" a 6" 11 ELBOW 90 DEGREES K2A1 1/2 2 6000 SW STAINLESS STEEL, ELBOW 90 DEGREES, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 1 1/2 3000 550 150 A182 GR. F316 0 SW - 90 DEGREE ELBOW FEMALE END Diferencias en: Diámetros y Rating. Se escoge el Rating y rango de diámetros de Ecopetrol ECP-VST-G-GEN-FT-001 696/761 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION PRE SS TEM P MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PL UG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS Versión 1 ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 12 ELBOW 90 DEGREES K2A1 3 6 BW 40S STAINLESS STEEL, ELBOW 90 DEGREES, LONG RADIUS, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 600 100 A403 GR. WP 316L 0,0625 K0-3F 2 550 150 03 GR. WP31 0 BW - 90 DEGREE ELBOW LONG RADIUS Diferencias en: Diámetros. Se escoge el rango de diámetros de Ecopetrol, de 3" a 6" 13 CONCENTRIC REDUCER K2A1 1/2 2 BW x PE 80S STAINLESS STEEL, CONCENTRIC SWAGE, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 600 100 A403 GR. WP 316L 0,0625 K0-3F 2 550 150 03 GR. WP31 0 BW x PE - CONCENTRIC SWAGE Diferencias en: Diámetros. Colocar el rango de diámetros de Ecopetrol CONCENTRIC REDUCER 1/2 - 1 1/2 550 150 03 GR. WP316L BW x MTH - CONCENTRIC INCLUIR CONCENTRIC REDUCER 3/4 - 1 1/2 550 150 03 GR. WP316L BW x MTH - CONCENTRIC INCLUIR CONCENTRIC REDUCER 3/4 - 1 1/2 550 150 03 GR. WP316L BW x MTH - CONCENTRIC INCLUIR 14 CONCENTRIC REDUCER K2A1 3 6 BW 40S STAINLESS STEEL, CONCENTRIC REDUCER, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 600 100 A403 GR. WP 316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE STAINLESS STEEL ECCENTRIC SWAGE ASTM A 403 15 ECCENTRIC REDUCER K2A1 1/2 2 80S STAINLESS STEEL, ECCENTRIC SWAGE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER MSS-SP-95, PLAIN END, OR THREADED END AS PER ASME B1.20.1, OR BEVELED END AS PER ASME B16.25 600 100 A403 GR. WP 316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 16 ECCENTRIC REDUCER K2A1 3 6 BW 40S STAINLESS STEEL, ECCENTRIC REDUCER, ASTM A- 403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 600 100 A403 GR. WP 316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 17 REDUCER INSERT K2A1 1/2 2 6000 MxF STAINLESS STEEL, REDUCER INSERT, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, MALE x FEMALE, SOCKET WELDING ENDS AS PER ASME B16.11 600 100 A182 GR. F316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 18 CAP K2A1 1/2 2 6000 THD STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 1 1/2 3000 550 150 A182 GR. F316 0 FTH Diferencias en: Rango de Diámetros y Rating. Dejar el rando de diámetros y Rating de Ecopetrol 19 CAP K2A1 1/2 2 6000 SW STAINLESS STEEL, CAP, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 1 1/2 3000 550 150 A182 GR. F316 0 SW Diferencias en: Rango de Diámetros y Rating. Dejar el rando de diámetros y Rating de Ecopetrol 20 CAP K2A1 3 6 BW 40S STAINLESS STEEL, CAP, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 600 100 A403 GR. WP 316L 0,0625 K0-3F 2 550 150 03 GR. WP31 0 BW Diferencias en: Rango de Diámetros. Dejar el rango de diámetros de 3" a 6" 21 STRAIGHT AND REDUCER TEE K2A1 1/2 2 6000 SW STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 1 1/2 3000 550 150 A182 GR. F316 0 Diferencias en: Rango de diámetros y Rating. Utilizar los datos de Ecopetrol 22 STRAIGHT AND REDUCER TEE K2A1 3 6 BW 40S STAINLESS STEEL, STRAIGHT AND REDUCER TEE, ASTM A-403 GR. WP 316L, DIMENSIONS AS PER ASME B16.9, BEVELED ENDS AS PER ASME B16.25 600 100 A403 GR. WP 316L 0,0625 K0-3F 2 550 150 03 GR. WP31 0 No existe reducer tee para este diámetro. Utilizar los datos de Ecopetrol Diferencias en: Rango de Diámetros. Dejar el rango de diámetros de 3" a 6" 23 OLET K2A1 1/2 2 6000 THD STAINLESS STEEL, THREDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, FEMALE THREADED ENDS AS PER ASME B1 20 1 NPT 600 100 A182 GR. F316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 24 OLET K2A1 1/2 2 6000 SW STAINLESS STEEL, SOCKOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, SOCKET WELDING ENDS AS PER ASME B16.11 600 100 A182 GR. F316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 25 OLET K2A1 3 6 BW 40S STAINLESS STEEL, WELDOLET, ASTM A-182 GR. F316L, DIMENSIONS AS PER MSS-SP-97, BEVELED ENDS AS PER ASME B16.25 600 100 A182 GR. F316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 26 PLUG K2A1 1/2 2 6000 THD STAINLESS STEEL, PLUG SOLID, ROUND HEAD, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16 11 MALE THREADED ENDS AS PER ASME 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 1 1/2 550 150 A182 GR. F316 0 MTH - ROUND HEAD TYP Diferencias en: Rango de Diámetros. Utilizar los datos de Ecopetrol 27 COUPLING K2A1 1/2 2 6000 THD STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1.20.1, NPT 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 1 1/2 3000 550 150 0 FTH Diferenicas en: Rango de Diámetros y Rating. Utilizar los valores de Ecopetrol COUPLING 1/2 - 1 1/2 3000 550 150 0 COUPLING - SW x FTH INCLUIR 28 COUPLING K2A1 1/2 2 6000 SW STAINLESS STEEL, COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 1 1/2 3000 550 150 0 SW Diferenicas en: Rango de Diámetros y Rating. Utilizar los valores de Ecopetrol 29 HALF COUPLING K2A1 1/2 2 6000 THD STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, FEMALE THREADED ENDS AS PER ASME B1 20 1 NPT 600 100 A182 GR. F316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE HALF COUPLING 1/2 - 1 1/2 3000 550 150 A182 GR. F316 0 HALF COUPLING - PE x SW INCLUIR 30 HALF COUPLING K2A1 1/2 2 6000 SW STAINLESS STEEL, HALF COUPLING, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.11, SOCKET WELDING ENDS AS PER ASME B16.11 600 100 A182 GR. F316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 31 NIPPLE K2A1 1/2 2 THD 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 312 GR TP316L DIMENSIONS AS PER ASME B36 19 600 100 A312 TP316L 0 0625 K0 3F 1/2 1 1/2 550 150 A312 TP316L 0 MTH SEAMLESS L =100mAumentar el rango de Diámetros 31 NIPPLE K2A1 1/2 2 THD 80S 312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, MALE THREADED ENDS AS PER ASME B1.20.1, NPT 600 100 A312 TP316L 0,0625 K0-3F 1/2 - 1 1/2 550 150 A312 TP316L 0 MTH - SEAMLESS - L =100m ghasta 2" NIPPLE K0-3F 1/2 - 1 1/2 550 150 A312 TP316L 0 PE x MTH - SEAMLESS - L = 100, INCLUIR ECP-VST-G-GEN-FT-001 697/761 Item PIPING ELEMENT CLASS DN from DN to (in) RATING FACE SCHEDULE COMPONENTS DESCRIPTION PRE SS TEM P MAT CA TRIM PORT SEATS GASKET BALL/PLU G WEDGE OPERAT NEW CLASS DIAM RATING SHED PRESS TEMP MAT CA TRIM PORT SEATS GASKET BALL/PL UG WEDGE OPERAT TAG VALVE NOTES ANÁLISIS Versión 1 ECOPETROL REFINERÍA PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTANDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/11 32 NIPPLE K2A1 1/2 2 PE 80S STAINLESS STEEL, NIPPLE, SEAMLESS PIPE, ASTM A- 312 GR. TP316L, DIMENSIONS AS PER ASME B36.19, PLAIN ENDS 600 100 A312 TP316L 0,0625 K0-3F 1/2 - 1 1/2 550 150 A312 TP316L 0 PE - SEAMLESS - L = 100, 150, 200 mm Aumentar el rango de Diámetros hasta 2" 33 FLANGE K2A1 1/2 2 300 RF 80S STAINLESS STEEL, SOCKET WELDING FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 1 1/2 300 550 150 A182 GR. F316 0 RF - FLG x SW Utilizar el rango de Díametros de Ecopetrol 34 FLANGE K2A1 3 6 300 RF 40S STAINLESS STEEL, WELDING NECK FLANGE, ASTM A- 182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 600 100 A182 GR. F316L 0,0625 K0-3F 2 300 550 150 A182 GR. F316 0 RF - FLG x BW Utilizar el rango de Díametros de Ecopetrol 34 FLANGE K0-3F 2 600 550 150 A182 GR. F316 0 RF - FLG x BW INCLUIR 35 BLIND FLANGE K2A1 1/2 6 300 RF STAINLESS STEEL, BLIND FLANGE, ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE FLANGED END 600 100 A182 GR. F316L 0,0625 K0-3F 1/2 - 2 300 550 150 A182 GR. F316 0 Diferencias en: Rango de Diámetros. Utilizar los datos de Ecopetrol 35 BLIND FLANGE K0-3F 3/4 - 2 300 550 150 A182 GR. F316 0 BLINDS PROVIDED WITH 1/2" TAPER INCLUIR 36 ORIFICE FLANGE K2A1 1 1/2 2 300 RF 80S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16 36 GENERAL 600 100 A182 GR. F316L 0,0625 K0-3F 2 300 550 150 A182 GR. F316 0 FLG x BW - COUPLE ORIF, WN-FLG 1/2" TH - TAP Solamente se tienen díametros de 2". Complementar el rango de 1 1/2 - 2"DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16 36 COMPLETE TAP 37 ORIFICE FLANGE K2A1 3 6 300 RF 40S STAINLESS STEEL, SET OF WELDING NECK ORIFICE FLANGES (COUPLE OF WELDING NECK FLANGE WITH NPT ORIFICE), ASTM A-182 GR. F316L, DIMENSIONS AS PER ASME B16.36, GENERAL REQUIREMENTS AS PER ASME B16.36, COMPLETE WITH SPACING JACK SCREWS, BOLTS ASTM A-193 GR. B16, NUTS ASTM A-194 GR. 8M AND PLUGS ASTM A-182 GR. F316L. 600 100 A182 GR. F316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 38 FIGURE 8 K2A1 1/2 6 300 RF STAINLESS STEEL, FIGURE 8 BLIND, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 600 100 A240 GR. 316L 0,0625 K0-3F 1/2 - 2 300 550 150 A240 GR. 316L 0 WAFER JOINT TYPE Diferencias en: Rango de Diámetros. Utilizar el rango de Diámetros de Ecopetrol 39 DRIP RINGS K2A1 2 6 300 RF STAINLESS STEEL, DRIP RING, THE RING WILL HAVE A 3/4" IN RADIAL BORE THREADED AS PER ASME B1.20.1, ASTM A-240 GR. 316L, DIMENSIONS AS PER ASME B16.5, RAISED FACE ENDS 600 100 A240 GR. 316L 0,0625 K0-3F 550 150 0 NO EXISTE EN ESTA CLASE 40 GASKET K2A1 1/2 6 300 RF STAINLESS STEEL, SPIRAL WOUND GASKET WITH GRAPHITE FILLER, INNER RING AND EXTERNAL CENTERING RINGS, THICKNESS 1/8" INCHES, AISI 316L SS, DIMENSIONS AS PER ASME B16.20, SUITABLE FOR RAISED FACE FLANGES ASME B16.5 600 100 AISI 316 L SS 0,0625 K0-3F 1/2 - 2 300 550 150 AISI 316L 0 SPIRAL WOUND/GRAPHITE - FLEXITALLIC CG, 1/8" THK Diferencias en: Rango de Diámetros. Utilizar el rango de Diámetros de Ecopetrol 41 BOLTING K2A1 STAINLESS STEEL, STUD BOLT WITH TWO SEMI FINISHED HEAVY TYPE HEXAGONAL NUTS, ASTM A- 193 GR. B16 / ASTM A 194 GR. 8M, THREADED ENTIRE LENGTH AS PER ASME B1.1, DIMENSIONS AS PER ASME B18.2.1 AND ASME B18.2.2 600 100 STUD BOLTS: A193 GR. B16 / NUTS: A194 GR. 8M 0,0625 K0-3F 550 150 STUD BOLTS: A193 GR. B16 / NUTS: A194 GR. 8M 0 NOTES: AMARILLO GRIS OSCUPO GRIS CLARO BLANCO ITEMS NUEVOS EN CLASES CONTRATO MARCO ITEMS QUE NO EXISTEN EN CLASES CONTRATO MARCO ITEMS QUE HAY DIFERENCIA CON RELACION A CLASES REFINERIA ITEMS QUE SON IGUALES ECP-VST-G-GEN-FT-001 698/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST -P-MET-ET-006 Elaborado 25/03/2011 Versión: 1 ANEXO 2 ECP-VST-G-GEN-FT-001 699/761 Versión: 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 TAG CLASS @ @ 1/2 0,406" 0,438" 0,469"STD WT.SCH. 160 6 16 248 20 FLANGES PIPING ( 3 y 4 ) 1-1/2 4 DN (Inches) TAG ELEMENTS 3/4 3 STD WT. 182 AA1A31 CORROSION ALLOWANCE (Inch) TEMP. ºF OPERATION ( 1 ) 150 @ ANSI CLASS MAWP (PSIG) 0,125 MAOP (PSIG) 10 3012 256 Gas Transmission 355 36 4214 1 CLASS 150, RF WN, A105, ASME B16.47 Series A, wall thickness to match pipe. CLASS 150, RF SW, ASTM A105, ASME B16.5 CLASE 300, RF SW, ASTM A105, ASME B16.5 ASTM A106 Gr. B, PBE CLASS 150, RF WN, A105, ASME B16.5, wall thicknes to match pipe. ASTM A53 Gr. B, SMLS -20 A 100 °F HIDROSTATIC TEST ( 2 ) DESIGN PRESSURE (PSIG) 481 TEMP. ºF DESIGN CODE SERVICE: 285 TEMP. ºF -20 A 100 °FB31.8 -20 A 100 °F API 5L Gr. B, ERW/DSAW CLASS 150, RF, A105, ASME B16.47 Series A. ORIFICE FLANGES BLINDS CLASS 3000 SW ASTM A105 ASME B16 11( 5 NOT APPLY CLASS 300, RF WN, A105, ASME B16.36, bore to match pipe. CLASS 150, RF WN, A105, ASME B16.47 Series A, bore to match pipe. ASTM A234 G WPBW ( ld d ) CLASS 150, RF, A105, ASME B16.5. ECP-VST-P-MET-ET-006 25/03/11 UNIONS CLASS 3000, SW, ASTM A105, ASME B16.11( 5 )FITTINGS ( 4 ) CLASS 3000, SOCKOLET, A105, MSS SP-97 CLASS 150, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.47 Series A. WELDOLET, ASTM A105, MSS SP-97, Ends to match Head and Branch Piping. CLASS 150 / CLASE 300, 1/8" ESPIROMETÁLICA, Only Inner Ring 304 SS, Grafhite Filler, ASME B16.20. CLASS 150, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.5. CLASS 150, ASTM A515 Gr. 70, Design to ASME B31.3 ASTM A234 Gr. WPBW (welded seam), ASME B16.9, wall thicknes to match pipe.ASTM A234 Gr. WPB (SMLS), ASME B16.9, wall thicknes to match pipe. CLASS 3000, SW, ASTM A105, MSS SP-79 O´LETS CLASS 150, ASTM A515 Gr. 70, ASME B16.48. GASKETS REDUCER COUPLINGS NOT APPLY NOT APPLY CLASS 3000, SW, ASTM A105, ASME B16.11 SWAGES NOT APPLY COUPLINGS NOT APPLY ASTM A234, MSS SP-95, Ends to match pipes (PBE ó BE x PE). BLANKS CLASS 3000, SW, ASTM A105, MSS SP-83 Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2H NOT APPLY STUD BOLTS / NUTS SCH. 160, ASTM A106 Gr. B, PBENIPPLES NOT APPLYPLUGS & BUSHINGS CLASS 3000, THRD, ASTM A105, ASME B16.11 ECP-VST-G-GEN-FT-001 700/761 Versión: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO Elaborado TAG CLASS @ @ AA1A31 CORROSION ALLOWANCE (Inch) TEMP. ºF OPERATION ( 1 ) 150 @ ANSI CLASS MAWP (PSIG) 0,125 MAOP (PSIG) 256 Gas Transmission 355 Versión: 1 -20 A 100 °F HIDROSTATIC TEST ( 2 ) DESIGN PRESSURE (PSIG) TEMP. ºF DESIGN CODE SERVICE: 285 TEMP. ºF -20 A 100 °FB31.8 -20 A 100 °F CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T BA12K5I2H BRANCH NO APLICA BA01A0F2H CK01A0B2 / CK01A0B2L SPECIAL CW01A0B2 GA04H0I1J / GA04F0I1J / GA04J0I1J BA01A0F2J CHECK BA01A0I2J GL01A0B2 GA01A0I2J BA01A0I2H BLOCK BA04H0I1J / BA04F0I1J / BA04J0I1J GL04H0I2 / GL04F0I2 GL01A0I2 RELIEF NE13H0I NO APLICA CK04H0I2 / CK04F0I2 Instrumentation must complete this description. CW01A0I2 S E A L S V Á L V E S ( 6 ) CK01A0I2 GA01A0B2J / GA01A0B2L Instrumentation must complete this description. 36 S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. NOMENCLATURE 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. 3. Wall thickness showed up correspond to F (design factor) : 0,72, E (joint factor) : 1, and T ( temperature factor): 1; in any other case, wall thickness must be re-calculated to ASME B31.8 and according to "Location class", besides consideration of metal temperature and pipe manufacturing. 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 826 " Inspection of Welds" ASME B31.8 -2007. H E A D 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Design, Installation and Test" from ASME B31.8. 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings shall be used only for water service and instrument air. For the interface mechanical / Instrumentation interfase valves shalll be threaded to connect fitting required. S = SOCKOLET W = WELDOLET T = TEE ECP-VST-G-GEN-FT-001 701/761 TAG CLASS OPERATION ( 1 ) DESIGN CODE SERVICE: TEMP. ºF DESIGN PRESSURE. (PSIG) ANSI CLASS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 @ @ DN (pulg) TAG BA04H0I1J BA04F0I1J BA04J0I1J 2" - 10" BA01A0I2J 12" - 30" BA01A0F2J GA04H0I1J GA04F0I1J GA04J0I1J 2" - 10" GA01A0I2J VALVE TYPE VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 150# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. Ball Valve, Class 800#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. Ball Valve, Class 150# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Devlon Seats, Lever Operator. Design code API 6D. Ball Valve, Class 800#, Screwed Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Design code API 6D, testing according to API 598. Ball Valve, Class 800#, SW x Screwed Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with one (1) nipple A106 Gr B Sch. 40 6" lenght at SW end. Design code API 6D, testing according to API 598. B A L L 1/2" - 1 1/2" TEMP. ºF 256 -20 A 100 °F 100 PRESSURE MAX. (PSIG)AA1A31 150 B31.8 285 CORROSION ALLOWANCE (Inch) 0,125 Gas Transmission Gate Valve, Class 800#, Screwed Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 800#, SW x Screwed Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. G A T E 1/2" - 1 1/2" Gate Valve, Class 800#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. G C # O S & S C C S S G C G G O & S S Gate Valve, Class 150# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. 12" - 30" GA01A0B2J 12" - 30" GA01A0B2L GL04H0I2 GL04F0I2 2" - 10" GL01A0I2 12" - 30" GL01A0B2 CK04H0I2 CK04F0I2 2" - 4" CK01A0I2 6" - 24" CK01A0B2 6" - 24" CK01A0B2L 2" - 4" CW01A0I2 6" - 24" CW01A0B2 N E E D L E 1/2" - 1 1/2" NE13H0I 1/2" - 1 1/2" BA12K5I2H Check Valve, Class 800#, Screwed Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 150#, FULL-OPENING, Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 150# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. C H E C K 1/2" - 1 1/2" Check Valve, Class 800#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 150# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. E & D Check Valve, Class 150# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Neddle valve, 3000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Check Valve, Class 150# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Integral Monoflange Valve, 2500# RFxNPT, Double Block & Bleed Valve, Needle Blocks and Vent, Flanged (process) x Threaded connections; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. Globe Valve, Class 150# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24" Design code ASME B16.34, testing according to API 598. Globe Valve, Class 150# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. Globe Valve, Class 800#, Screwed Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. G L O B E 1/2" - 1 1/2" Globe Valve, Class 800#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. G Gate Valve, Class 150# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. Gate Valve, Class 150#, THRU CONDUIT, Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. 2" - 10" BA01A0I2H 12" - 30" BA01A0F2HD O U B L E B L O C K & B L E E D Double Block and Bleed Ball Valve, Class 150# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. Double Block and Bleed Ball Valve , Class 150# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Devlon Seats, Lever Operator.Design code API 6D. ECP-VST-G-GEN-FT-001 702/761 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES PIPING MATERIAL SPECIFICATION Versión: 1 TAG CLASE @ @ 1/2 0,406" 0,438" 0,469" ACCESORIOS ( 4 ) CLASE 3000, SW, ASTM A105, ASME B16.11( 5 ASTM A234 Gr. WPBW (con costura), ASME B16 9 espesor de pared igual al delASTM A234 Gr WPB (SMLS) ASME B16 9 espesor de pared igual al del tubo 3 0,125 CLASE 150, RF, A105, ASME B16.47 Serie A. DN (Pulgadas) TAG ELEMENTOS CLASE 150, RF WN, A105, ASME B16.47 Serie A, espesor pared igual al del tubo. TUBERÍA ( 3 y 4 ) STD WT. 428 20 30 486 CLASE 150, RF WN, A105, ASME B16.5, espesor de pared igual al del tubo.CLASE 150, RF SW, ASTM A105, ASME B16.5 CLASE 300, RF SW, ASTM A105, ASME B16.5 CLASE 150, RF, A105, ASME B16.5.CIEGOS BRIDAS ASTM A53 Gr. B, SMLS BRIDAS DE ORIFICIO ASTM A106 Gr. B, PBE API 5L Gr. B, ERW/DSAW OPERACIÓN ( 1 ) PRUEBA HIDROSTATICA ( 2 ) CLASE ANSI 150 CLASE 300, RF WN, A105, ASME B16.36, espesor de pared igual al del tubo. 36 MAOP (PSIG) TEMP. ºF 1 12 182 4 16141-1/2 24 CLASE 150, RF WN, A105, ASME B16.47 Serie A, espesor pared igual al del tubo.NO APLICA 10 SCH. 160 STD WT. 3/4 NORMA DISEÑO 285 PRESIÓN (PSIG) MAWP (PSIG) 355 Transporte de GasB31.8 -20 A 100 °F AA1A31 @ DISEÑO -20 A 100 °F256 TEMP. ºF CORROSIÓN PERMISIBLE (Pulg.) -20 A 100 °F TEMP. ºF SERVICIO: WELDOLET, ASTM A105, MSS SP-97, Extremos de acuerdo a espesores de Cabezal y ramal.CLASE 3000, SOCKOLET, A105, MSS SP-97 NO APLICA Espárragos ASTM A193 Gr. B7, con par de tuercas pesadas de cabeza hexagonal ASTM A194 Gr. 2H COUPLINGS (ACOPLES) NO APLICACLASE 3000, SW, ASTM A105, MSS SP-79 TAPONES y BUSHINGS COUPLINGS REDUCTORES CLASE 3000, THRD, ASTM A105, ASME B16.11 ASTM A234, MSS SP-95, Extremos según tubos a soldar (PBE ó BE x PE). NO APLICA CLASE 3000, SW, ASTM A105, ASME B16.11 CLASE 3000, SW, ASTM A105, MSS SP-83 NO APLICA ACCESORIOS ( 4 ) CLASE 3000, SW, ASTM A105, ASME B16.11 ) CLASE 150, 1/8" ESPIROMETÁLICA, Anillos interno y externo 304 SS, Relleno de Grafito, ASME B16.20, para brida ASME B16.47 Serie A. ASME B16.9, espesor de pared igual al del tubo. CLASE 150 / CLASE 300, 1/8" ESPIROMETÁLICA, Sólo Anillo interno 304 SS, Relleno de Grafito, ASME B16.20. CLASE 150, 1/8" ESPIROMETÁLICA, Anillos interno y externo 304 SS, Relleno de Grafito,ASME B16.20, para brida ASME B16.5. UNIONES NO APLICA ASTM A234 Gr. WPB (SMLS), ASME B16.9, espesor de pared igual al del tubo. ESPACIADORES (BLANKS) CLASE 150, ASTM A515 Gr. 70, ASME B16.48. CLASE 150, ASTM A515 Gr. 70, diseño por ASME B31.3 NO APLICA NIPLES EMPAQUES ESPARRAGOS / TUERCAS SCH. 160, ASTM A106 Gr. B, PBE O´LETS SWAGES (BOTELLAS) ECP-VST-G-GEN-FT-001 703/761 CODIGO Elaborado VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES PIPING MATERIAL SPECIFICATION Versión: TAG CLASE @ @0,125 OPERACIÓN ( 1 ) PRUEBA HIDROSTATICA ( 2 ) CLASE ANSI 150 MAOP (PSIG) TEMP. ºF NORMA DISEÑO 285 PRESIÓN (PSIG) MAWP (PSIG) CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 355 Transporte de GasB31.8 -20 A 100 °F AA1A31 @ DISEÑO -20 A 100 °F256 TEMP. ºF CORROSIÓN PERMISIBLE (Pulg.) -20 A 100 °F Versión: 1 TEMP. ºF SERVICIO: BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" S S S S W W W W W W W W W R R R R R R R T NOTAS: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T ALIVIO Completar por Instrumentación. DIAMETRO CONEXIÓN GA01A0I2J BA01A0I2H CW01A0B2 S E L L O Completar por Instrumentación. V Á L V U L A S ( 6 ) GL01A0B2 CK01A0I2 BA01A0F2JBA01A0I2J GA01A0B2J / GA01A0B2L NO APLICA RETENCIÓN NO APLICA GA04H0I1J / GA04F0I1J / GA04J0I1J BA12K5I2H ESPECIAL GL04H0I2 / GL04F0I2 GL01A0I2 CW01A0I2 BLOQUEO CK04H0I2 / CK04F0I2 CK01A0B2 / CK01A0B2L BA04H0I1J / BA04F0I1J / BA04J0I1J BA01A0F2H NE13H0I 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Diseño, Instalación y Pruebas del código B31.8. 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 826 "Inspección de Soldadura" de ASME B31.8-2007. W = WELDOLET T = TEE NOMENCLATURA S = SOCKOLET 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, E (factor de junta): 1, y T (factor por temperatura): 1; para cualquier otro caso estos espesores deberán ser re-calculados de acuerdo a ASME B31.8 y según la clase de locación (Location Class), aparte de las consideraciones por temperatura del metal y método de fabricación del tubo. 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. D I A M E T R O C A B E Z A L 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados deben ser usados sólo para servicio de agua y aire para instrumentación . Para la interfase Mecánica / Instrumentación las válvulas serán roscadas al accesorio de conexión requerido. 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. ECP-VST-G-GEN-FT-001 704/761 TAG @ PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 AA1A31 150 B31.8 DISEÑO 285 PRESIÓN(PSIG) Transporte de Gas ANSI CLASE OPERACIÓN ( 1 ) TEMP. ºF CÓDIGO DE DISEÑO SERVICIO: 100 TEMP. ºF MAX. PRESIÓN (PSIG) @ DN (pulg) TAG BA04H0I1J BA04F0I1J BA04J0I1J 2" - 10" BA01A0I2J 12" - 30" BA01A0F2J GA04H0I1J GA04F0I1J GA04J0I1J 2" - 10" GA01A0I2J Válvula de compuerta, Clase 800#, extremos roscados, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 800#, extremos roscado x socket, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API M P U E R T A 1/2" - 1 1/2" Válvula de compuerta, Clase 800#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta Clase 150# RF extremos bridados bonete apernado vástago roscado y ascendente disco tipo cuña flexible cuerpo y bonete en acero al carbón fundido ASTM A216 Gr WCB internos Trim 8 empacaduras en grafito Operada por reductor Bridas ASME B16 5 hasta 24" ASME B16 47 serie A por Válvula de compuerta, Clase 150# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598 CORROSION PERMITIDA (Inch) 0,125 256 -20 A 100 °F TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN Válvula de bola, Clase 150# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula de bola, Clase 800#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 40 de 6" de longitud. Código de diseño API 6D, probada según API 598. Válvula de bola, Clase 150# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. Válvula de bola, Clase 800#, extremos roscados, bola flotante; acceso por los extremos, asientos y bola reemplazables; cuerpo y cubierta de acero al carbón forjado ASTM A-105; internos 316 SS, a prueba de fuego según API 607; asientos de teflon reforzado; operada por palanca; paso normal. código de diseño API 6D, probada según API 598. Válvula de bola, Clase 800#, extremos roscado x socket, bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta an acero al carbón forjado ASTM A-105; internos en 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanca; paso normal. Suministrada con dos niples A106 Gr B Sch. 40 de 6" de longitud. Código de diseño API 6D, probada según API 598. B O L A 1/2" - 1 1/2" 12" - 30" GA01A0B2J 12" - 30" GA01A0B2L GL04H0I2 GL04F0I2 2" - 10" GL01A0I2 12" - 30" GL01A0B2 CK04H0I2 CK04F0I2 2" - 4" CK01A0I2 6" - 24" CK01A0B2 6" - 24" CK01A0B2L 2" - 4" CW01A0I2 6" - 24" CW01A0B2 A G U J A 1/2" - 1 1/2" NE13H0I 1/2" 1 1/2" BA12K5I2H C O M Válvula de compuerta, Clase 150# RF extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. Válvula de compuerta, Clase 150# RF extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. Válvula de globo, Clase 150# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A en tamaños mayores a 24". Design code ASME B16.34, probada de acuerdo a API 598. Válvula de globo, Clase 150# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de globo, Clase 800#, extremos roscados, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API G L O B O 1/2" - 1 1/2" Válvula de globo, Clase 800#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API & Válvula de retención, Clase 150# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de aguja, 3000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula de retención, Clase 150# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Vál l i t l b id 2500# RF NPT D bl Bl & P j bl t b id d (l d ) d (l d i t t ) b t i t 316SS ll d l á t b t PTFE (t fló ) d b d f API 6FA Válvula de retención, Clase 800#, extremos roscados, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 150# RF, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API Válvula de retención, Clase 150# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. R E T E N C I Ó N 1/2" - 1 1/2" Válvula de retención, Clase 800#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 150# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA01A0I2H 12" - 30" BA01A0F2HD O B L E B L O Q U E O & P U R G A Válvula de Doble Bloqueo & Purga, Clase 150# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula integral monobrida, 2500# RFxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. Válvula de Doble Bloqueo & Purga, Clase 150# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. ECP-VST-G-GEN-FT-001 705/761 TAG CLASS @ @ 1/2 48 0,406" 0,438" 0,469" CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 CLASS 3000, SW, ASTM A105, ASME B16.11( ASTM A234 Gr. WPBW (welded seam), ASTM A234 Gr WPB (SMLS) ASME B16 9 wall thicknes to match pipeFITTINGS ( 4 ) @ 20 150 285 CLASS 150, RF, A105, ASME B16.47 Series A. CLASS 150, RF WN, A105, ASME B16.47 Series A, bore to match pipe. CLASS 150, RF SW, ASTM A105, ASME B16.5 CLASE 300, RF SW, ASTM A105, ASME B16.5 NOT APPLY CLASS 150, RF, A105, ASME B16.5. CLASS 300, RF WN, A105, ASME B16.36, bore to match pipe. API 5L Gr. B, ERW/DSAW CLASS 150, RF WN, A105, ASME B16.47 Series A, wall thickness to match pipe. 123 36 422414 CLASS 150, RF WN, A105, ASME B16.5, wall thicknes to match pipe. STD WT. BLINDS Transporte de Hidrocarburos Líquidos HIDROSTATIC TEST ( 2 ) TEMP. ºF AA1A32 ORIFICE FLANGES DN (Inches) TAG ELEMENTS 3/4 FLANGES PIPING ( 3 y 4 ) B31.4 ASTM A106 Gr. B, PBE 6 ASTM A53 Gr. B, SMLS SCH. 160 STD WT. 21-1/2 10 TEMP. ºF 256 164 -20 A 100 °F ANSI CLASS SERVICE: 0,125CORROSION ALLOWANCE (Inch) PRESSURE (PSIG) TEMP. ºF 30181 8 -20 A 100 °F -20 A 100 °F DESIGN MAOP (PSIG) OPERATION ( 1 ) DESIGN CODE 355 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES MAWP (PSIG) CLASS 3000, THRD, ASTM A105, ASME B16.11 NOT APPLYPLUGS & BUSHINGS NIPPLES SCH. 160, ASTM A106 Gr. B, PBE NOT APPLY UNIONS NOT APPLYASTM A234, MSS SP-95, Ends to match pipes (PBE ó BE x PE).SWAGES CLASS 3000, SW, ASTM A105, MSS SP-79 CLASS 3000, SW, ASTM A105, ASME B16.11 NOT APPLY REDUCER COUPLINGS NOT APPLY , , , 5 ) COUPLINGS CLASS 3000, SW, ASTM A105, MSS SP-83 WELDOLET, ASTM A105, MSS SP-97, Ends to match Head and Branch Piping. CLASS 150, ASTM A515 Gr. 70, Design to ASME B31.3 CLASS 3000, SOCKOLET, A105, MSS SP-97 CLASS 150, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.47 Series A. NOT APPLY Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2HSTUD BOLTS / NUTS BLANKS O´LETS CLASS 150, ASTM A515 Gr. 70, ASME B16.48. GASKETS CLASS 150 / CLASE 300, 1/8" ESPIROMETÁLICA, Only Inner Ring 304 SS, Grafhite Filler, ASME B16.20. CLASS 150, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.5. ( ), ASME B16.9, wall thicknes to match pipe.ASTM A234 Gr. WPB (SMLS), ASME B16.9, wall thicknes to match pipe.FITTINGS ( 4 ) ECP-VST-G-GEN-FT-001 706/761 TAG CLASS @ @ CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 @ 150 285Transporte de Hidrocarburos Líquidos HIDROSTATIC TEST ( 2 ) TEMP. ºF AA1A32 B31.4 TEMP. ºF 256 -20 A 100 °F ANSI CLASS SERVICE: 0,125CORROSION ALLOWANCE (Inch) PRESSURE (PSIG) TEMP. ºF -20 A 100 °F -20 A 100 °F DESIGN MAOP (PSIG) OPERATION ( 1 ) DESIGN CODE 355 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES MAWP (PSIG) BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T GL04H0I2 / GL04F0I2 S E A L S CHECK BA01A0F2H SPECIAL BLOCK NO APLICANE13H0I GL01A0B2 BA12K5I2H GA01A0I2J V Á L V E S ( 6 ) RELIEF Instrumentation must complete this description. BRANCH CK01A0B2 / CK01A0B2L BA01A0I2J BA04H0I1J / BA04F0I1J / BA04J0I1J CK04H0I2 / CK04F0I2 CW01A0B2 CK01A0I2 NO APLICA CW01A0I2 BA01A0I2H Instrumentation must complete this description. GA01A0B2J / GA01A0B2L GL01A0I2 GA04H0I1J / GA04F0I1J / GA04J0I1J BA01A0F2J 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T W = WELDOLET T = TEE 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 434.8.5 "Required Inspection and Acceptance Criteria" ASME B31.4-2006. 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Inspection and Testing" from ASME B31.4. NOMENCLATURA 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings shall be used only for water service and instrument air. For the interface mechanical / Instrumentation interfase valves shalll be threaded to connect fitting required. 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. H E A D S = SOCKOLET 3. Wall thickness showed up correspond to F (design factor) : 0,72, and E (joint factor) : 1; in any other case, wall thickness must be calculated according to ASME B31.4 and pertinent design factor F, which could be lower than 0.72 (ASME B31.4-2006, 402.3.1 (h)) depending on special service conditions or location, but never will be upper than this value (ASME B31.4-2006, 402.3.1 (a)). ECP-VST-G-GEN-FT-001 707/761 TAG CLASS @ @ DN (pulg) TAG BA04H0I1J BA04F0I1J BA04J0I1J 2" - 10" BA01A0I2J PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES Versión 1 Elaborado 25/03/2011 ÓDIGO CNE ECP-VST-P-MET-ET-006 AA1A32 150 B31.4 DESIGN 285 PRESSURE. (PSIG) CORROSION ALLOWANCE (Inch) 0,125 Transporte de Hidrocarburos Líquidos ANSI CLASS OPERATION ( 1 ) TEMP. ºF 256 DESING CODE SERVICE: -20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG) VALVE TYPE VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 800#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. Ball Valve, Class 150# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Devlon Seats, Lever Operator. Design code API 6D. Ball Valve, Class 800#, Screwed Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Design code API 6D, testing according to API 598. Ball Valve, Class 800#, SW x Screwed Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with one (1) nipple A106 Gr B Sch. 40 6" lenght at SW end. Design code API 6D, testing according to API 598. B A L L 1/2" - 1 1/2" 12" - 30" BA01A0F2J GA04H0I1J GA04F0I1J GA04J0I1J 2" - 10" GA01A0I2J 12" - 30" GA01A0B2J 12" - 30" GA01A0B2L Gate Valve, Class 800#, Screwed Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 800#, SW x Screwed Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. G A T E 1/2" - 1 1/2" Gate Valve, Class 800#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 150# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. Gate Valve, Class 150# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. Gate Valve, Class 150#, THRU CONDUIT, Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. Ball Valve, Class 150# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D Operator. Design code API 6D. ECP-VST-G-GEN-FT-001 708/761 TAG CLASS @ @ PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES Versión 1 Elaborado 25/03/2011 ÓDIGO CNE ECP-VST-P-MET-ET-006 AA1A32 150 B31.4 DESIGN 285 PRESSURE. (PSIG) CORROSION ALLOWANCE (Inch) 0,125 Transporte de Hidrocarburos Líquidos ANSI CLASS OPERATION ( 1 ) TEMP. ºF 256 DESING CODE SERVICE: -20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG) GL04H0I2 GL04F0I2 2" - 10" GL01A0I2 12" - 30" GL01A0B2 CK04H0I2 CK04F0I2 2" - 4" CK01A0I2 Globe Valve, Class 150# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24" Design code ASME B16.34, testing according to API 598. Globe Valve, Class 150# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. Globe Valve, Class 800#, Screwed Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. G L O B E 1/2" - 1 1/2" Globe Valve, Class 800#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. Check Valve, Class 150# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 800#, Screwed Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. 1/2" - 1 1/2" Check Valve, Class 800#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. 6" - 24" CK01A0B2 6" - 24" CK01A0B2L 2" - 4" CW01A0I2 6" - 24" CW01A0B2 N E E D L 1/2" - 1 1/2" NE13H0I 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA01A0I2H 12" - 30" BA01A0F2H D O U B L E B L O C K & B L E E D Double Block and Bleed Ball Valve, Class 150# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series Seals. Design code API 6D, testing according to API 598. Neddle valve, 3000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Check Valve, Class 150# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598 Integral Monoflange Valve, 2500# RFxNPT, Double Block & Bleed Valve, Needle Blocks and Vent, Flanged (process) x Threaded connections; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. Double Block and Bleed Ball Valve , Class 150# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Devlon Seats, Lever Operator.Design code API 6D. Check Valve, Class 150#, FULL-OPENING, Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 150# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. C H E C K Check Valve, Class 150# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. ECP-VST-G-GEN-FT-001 709/761 TAG CLASE @ MAWP (PSIG)Transporte de Hidrocarburos Líquidos PRUEBA HIDROSTATICA ( 2 ) TEMP. ºF TEMP. ºF TEMP. ºF PRESIÓN (PSIG) SERVICIO: CORROSIÓN PERMISIBLE 150 NORMA DISEÑO PIPING MATERIAL SPECIFICATION GERENCIA DE DESARROLLO DE TRANSPORTE VICEPRESIDENCIA DE TRANSPORTE Y LOGÍSTICA Versión 1 DISEÑO B31.4 Elaborado 25/03/2011 CÓDIGO CNE ECP-VST-P-MET-ET-006 285 MAOP (PSIG) -20 A 100 °FAA1A32 OPERACIÓN ( 1 ) CLASE ANSI @ 1/2 0,406" 0,438" 0,469" -20 A 100 °FCORROSIÓN PERMISIBLE (Pulg.) 256 -20 A 100 °F 3/4 12 3024 @355 DN (Pulgadas) TAG ELEMENTOS 3620 42 0,125 18161410 4881 63 421-1/2 SCH. 160 STD WT. STD WT. TUBERÍA ( 3 y 4 ) ASTM A106 Gr. B, PBE ASTM A53 Gr. B, SMLS CLASE 150, RF WN, A105, ASME B16.47 Serie A, espesor pared igual al del tubo. CLASE 150, RF WN, A105, ASME B16.47 Serie A, espesor pared igual al del tubo. CLASE 150, RF, A105, ASME B16.5. BRIDAS DE ORIFICIO CLASE 300, RF WN, A105, ASME B16.36, espesor de pared igual al del tubo. BRIDAS CLASE 150, RF WN, A105, ASME B16.5, espesor de pared igual al del tubo.CLASE 150, RF SW, ASTM A105, ASME B16.5 CLASE 300, RF SW, ASTM A105, ASME B16.5 CIEGOS NO APLICA API 5L Gr. B, ERW/DSAW CLASE 150, RF, A105, ASME B16.47 Serie A. NO APLICA CLASE 3000, SW, ASTM A105, ASME B16.11( 5 ) ASTM A234 Gr. WPB (SMLS), ASME B16.9, espesor de pared igual al del tubo. ASTM A234 Gr. WPBW (con costura), ASME B16.9, espesor de pared igual al del tubo. CLASE 150, 1/8" ESPIROMETÁLICA, Anillos interno y externo 304 SS, Relleno de Grafito, ASME B16.20, para brida ASME B16.47 Serie A. EMPAQUES NO APLICA CLASE 150 / CLASE 300, 1/8" ESPIROMETÁLICA, Sólo Anillo interno 304 SS, Relleno de Grafito, ASME B16.20. NIPLES ESPARRAGOS / TUERCAS CLASE 150, 1/8" ESPIROMETÁLICA, Anillos interno y externo 304 SS, Relleno de Grafito,ASME B16.20, para brida ASME B16.5. Espárragos ASTM A193 Gr. B7, con par de tuercas pesadas de cabeza hexagonal ASTM A194 Gr. 2H ACCESORIOS ( 4 ) UNIONES SWAGES (BOTELLAS) CLASE 3000, SW, ASTM A105, MSS SP-83 NO APLICAASTM A234, MSS SP-95, Extremos según tubos a ESPACIADORES (BLANKS) O´LETS CLASE 150, ASTM A515 Gr. 70, ASME B16.48. WELDOLET, ASTM A105, MSS SP-97, Extremos de acuerdo a espesores de Cabezal y ramal. CLASE 150, ASTM A515 Gr. 70, diseño por ASME B31.3 CLASE 3000, SOCKOLET, A105, MSS SP-97 SCH. 160, ASTM A106 Gr. B, PBE CLASE 3000, SW, ASTM A105, MSS SP-79 CLASE 3000, THRD, ASTM A105, ASME B16.11 NO APLICA NO APLICATAPONES y BUSHINGS COUPLINGS REDUCTORES NO APLICA SWAGES (BOTELLAS) NO APLICA, , gsoldar (PBE ó BE x PE). COUPLINGS (ACOPLES) CLASE 3000, SW, ASTM A105, ASME B16.11 ECP-VST-G-GEN-FT-001 710/761 TAG CLASE PRUEBA HIDROSTATICA ( 2 ) TEMP ºFPRESIÓN (PSIG) SERVICIO:NORMA DISEÑO PIPING MATERIAL SPECIFICATION GERENCIA DE DESARROLLO DE TRANSPORTE VICEPRESIDENCIA DE TRANSPORTE Y LOGÍSTICA Versión 1 DISEÑO Elaborado 25/03/2011 CÓDIGO CNE ECP-VST-P-MET-ET-006 OPERACIÓN ( 1 ) CLASE ANSI @ @ MAWP (PSIG)Transporte de Hidrocarburos Líquidos TEMP. ºF -20 A 100 °F TEMP. F TEMP. ºF PRESIÓN (PSIG) CORROSIÓN PERMISIBLE (Pulg.) 150 B31.4 285 256 -20 A 100 °F MAOP (PSIG) -20 A 100 °F @355 AA1A32 0,125 BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" S S S S W W W W W W W W W R R R R R R R T NOTAS: 42" S S S S W W W W W W W W W R R R R R R T GA04H0I1J / GA04F0I1J / GA04J0I1J V Á L V U L A S ( 6 ) Completar por Instrumentación. DIAMETRO CONEXIÓN BA01A0F2JBA01A0I2J BA12K5I2H GL01A0I2 CW01A0B2 CW01A0I2 CK01A0B2 / CK01A0B2L GL01A0B2 BLOQUEO BA04H0I1J / BA04F0I1J / BA04J0I1J GA01A0I2J GA01A0B2J / GA01A0B2L GL04H0I2 / GL04F0I2 CK04H0I2 / CK04F0I2 Completar por Instrumentación. NE13H0I S E L L O NO APLICA ALIVIO ESPECIAL NO APLICA BA01A0F2HBA01A0I2H RETENCIÓN CK01A0I2 NOTAS: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T D I A M E T R O C A B E Z A L 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Inspección y Pruebas del código B31.4. NOMENCLATURA 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados deben ser usados sólo para servicio de agua y aire para instrumentación . Para la interfase Mecánica / Instrumentación las válvulas serán roscadas al accesorio de conexión requerido. S = SOCKOLET 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 434.8.5 "Inspección Requerida y Criterios de Aceptación de Soldadura" de ASME B31.4-2006. 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, y E (factor de junta): 1; para cualquier otro caso estos espesores de pared deberán ser calculados de acuerdo a ASME B31.4 y según el factor de diseño F que en caso de consideraciones especiales de servicio o de Localidad (Location) podría ser menor a 0.72 (ASME B31.4-2006, 402.3.1 (h)) , pero en ningún caso podrá ser superior a este valor (ASME B31.4-2006, 402.3.1 (a)). 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto En ningún caso el material propuesto podrá ser de menores especificaciones a las del original W = WELDOLET T = TEE 2 S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. W WELDOLET ECP-VST-G-GEN-FT-001 711/761 TAG @ @ OPERACIÓN ( 1 ) TEMP. ºF 256 CÓDIGO DE DISEÑO SERVICIO: -20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG)AA1A32 150 B31.4 DISEÑO 285 PRESIÓN(PSIG) CORROSION PERMITIDA (Inch) 0,125 Transporte de Hidrocarburos Líquidos ANSI CLASE PIPING MATERIAL SPECIFICATION GERENCIA DE DESARROLLO DE TRANSPORTE VICEPRESIDENCIA DE TRANSPORTE Y LOGÍSTICA CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 16/05/11 Versión 1 DN (pulg) TAG BA04H0I1J BA04F0I1J BA04J0I1J 2" - 10" BA01A0I2J TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN Válvula de bola, Clase 800#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 40 de 6" de longitud. Código de diseño API 6D, probada según API 598. Válvula de bola, Clase 150# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. Válvula de bola, Clase 800#, extremos roscados, bola flotante; acceso por los extremos, asientos y bola reemplazables; cuerpo y cubierta de acero al carbón forjado ASTM A-105; internos 316 SS, a prueba de fuego según API 607; asientos de teflon reforzado; operada por palanca; paso normal. código de diseño API 6D, probada según API 598. Válvula de bola, Clase 800#, extremos roscado x socket, bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta an acero al carbón forjado ASTM A-105; internos en 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanca; paso normal. Suministrada con dos niples A106 Gr B Sch. 40 de 6" de longitud. Código de diseño API 6D, probada según API 598. B O L A 1/2" - 1 1/2" 12" - 30" BA01A0F2J GA04H0I1J GA04F0I1J GA04J0I1J 2" - 10" GA01A0I2J Válvula de bola, Clase 150# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. 6 Válvula de compuerta, Clase 800#, extremos roscados, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 800#, extremos roscado x socket, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. C O M P U E R T A 1/2" - 1 1/2" Válvula de compuerta, Clase 800#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 150# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598. 12" - 30" GA01A0B2J 12" - 30" GA01A0B2L Válvula de compuerta, Clase 150# RF extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. g p p g , p Válvula de compuerta, Clase 150# RF extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. ECP-VST-G-GEN-FT-001 712/761 TAG @ @ OPERACIÓN ( 1 ) TEMP. ºF 256 CÓDIGO DE DISEÑO SERVICIO: -20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG)AA1A32 150 B31.4 DISEÑO 285 PRESIÓN(PSIG) CORROSION PERMITIDA (Inch) 0,125 Transporte de Hidrocarburos Líquidos ANSI CLASE PIPING MATERIAL SPECIFICATION GERENCIA DE DESARROLLO DE TRANSPORTE VICEPRESIDENCIA DE TRANSPORTE Y LOGÍSTICA CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 16/05/11 Versión 1 GL04H0I2 Válvula de globo, Clase 800#, extremos roscados, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, probada según API 598. 1/2" - 1 1/2" Válvula de globo Clase 800# extremos socket paso reducido bonete apernado Vástago roscado y ascendente disco tipo tapón o semi tapón asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos disco y GL04F0I2 2" - 10" GL01A0I2 12" - 30" GL01A0B2 CK04H0I2 CK04F0I2 2" - 4" CK01A0I2 Válvula de retención, Clase 800#, extremos roscados, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. 1/2" - 1 1/2" Válvula de retención, Clase 800#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 150# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos Válvula de globo, Clase 150# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A en tamaños mayores a 24". Design code ASME B16.34, probada de acuerdo a API 598. Válvula de globo, Clase 150# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. G L O B O Válvula de globo, Clase 800#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, probada según API 598. 2 - 4 CK01A0I2 6" - 24" CK01A0B2 6" - 24" CK01A0B2L 2" - 4" CW01A0I2 6" - 24" CW01A0B2 U J A 1/2" - 1 1/2" NE13H0I Válvula de retención, Clase 150# RF, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 150# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. R E T E N C I Ó N Válvula de retención, Clase 150# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de aguja, 3000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula de retención, Clase 150# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. A G U 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA01A0I2H 12" - 30" BA01A0F2H D O B L E B L O Q U E O & P U R G A Válvula de Doble Bloqueo & Purga, Clase 150# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. asientos en Delrin o similar, Válvula integral monobrida, 2500# RFxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. Válvula de Doble Bloqueo & Purga, Clase 150# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. ECP-VST-G-GEN-FT-001 713/761 TAG CLASS @ DESIGN MAOP (PSIG) OPERATION ( 1 ) 740 TEMP. ºF TEMP. ºF PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES MAWP (PSIG) HIDROSTATIC TEST ( 2 ) TEMP. ºF CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 SERVICE: Versión 1 PRESSURE (PSIG) B31 8 DESIGN CODEANSI CLASS 300 -20 A 100 °FAA2A31 Gas Transmission @ @ 1/2 MAOP (PSIG) TEMP. F MAWP (PSIG)B31.8 670 300 925 -20 A 100 °F@ -20 A 100 °F0,125CORROSION ALLOWANCE (Inch) API 5L Gr. B, SMLS 42246 AA2A31 0,5"STD. WT. 36 0,688" 0,812" 0,938" Gas Transmission 14 0,406" 0,438" 0,469" DN (Inches) TAG ELEMENTS 3/4 BLINDS CLASS 300, RF, A105, ASME B16.5. 1 8 20 NOT APPLYORIFICE FLANGES PIPING ( 3 y 4 ) CLASS 300, RF, A105, ASME B16.47 Series A. CLASS 300, RF WN, A105, ASME B16.47 Series A, bore to match pipe. 1,062"0,625" CLASS 300, RF WN, A105, ASME B16.5, wall thicknes to match pipe. CLASS 300, RF WN, A105, ASME B16.47 Series A, wall thickness to match pipe.FLANGES 3018 CLASS 300, RF WN, A105, ASME B16.36, bore to match pipe. ASTM A234 G WPBW ( ld d ) CLASE 300, RF SW, ASTM A105, ASME B16.5 4 ASTM A106 Gr. B, PBE SCH. 160. 123 API 5L Gr. B, ERW/DSAW 1621-1/2 10 48 CLASS 3000, SW, ASTM A105, ASME B16.11( 5 ) STUD BOLTS / NUTS WELDOLET, ASTM A105, MSS SP-97, Ends to match Head and Branch Piping. CLASE 300, ASTM A515 Gr. 70, according to ASME B31.3 CLASS 3000, SOCKOLET, A105, MSS SP-97 BLANKS O´LETS CLASE 300, ASTM A515 Gr. 70, ASME B16.48. GASKETS CLASE 300, 1/8" ESPIROMETÁLICA, Only Inner Ring 304 SS, Grafhite Filler, ASME B16.20. CLASS 300, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.5. CLASS 300, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.47 Series A. FITTINGS ( 4 ) Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2H ASTM A234 Gr. WPBW (welded seam), ASME B16.9, wall thicknes to match pipe.ASTM A234 Gr. WPB (SMLS), ASME B16.9, wall thicknes to match pipe. NIPPLES SCH. 160, ASTM A106 Gr. B, PBE NOT APPLY UNIONS NOT APPLY CLASS 3000, SW, ASTM A105, ASME B16.11 NOT APPLY NOT APPLYASTM A234, MSS SP-95, Ends to match pipes (PBE ó BE x PE). CLASS 3000, SW, ASTM A105, MSS SP-83 SWAGES COUPLINGS CLASS 3000, THRD, ASTM A105, ASME B16.11 NOT APPLYPLUGS & BUSHINGS CLASS 3000, SW, ASTM A105, MSS SP-79REDUCER COUPLINGS NOT APPLY ECP-VST-G-GEN-FT-001 714/761 BALL GATE BA04H0I1J / BA04F0I1J / BA04J0I1J GA02A0B2J / GA02A0B2LGA04H0I1J / GA04F0I1J / GA04J0I1J BLOCK GA02A0I2J BA02A0I2J BA02A0F2J GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T Instrumentation must complete this description. GA02A0B2J / GA02A0B2L GL02A0I2 GA04H0I1J / GA04F0I1J / GA04J0I1J GL04H0I2 / GL04F0I2 V Á L V E S ( 6 ) RELIEF Instrumentation must complete this description. BRANCH CK02A0B2 / CK02A0B2L GL02A0B2 GA02A0I2J CHECK BA02A0F2H SPECIAL NO APLICANE13H0I BA12K5I2H CK04H0I2 / CK04F0I2 CW02A0B2 CK02A0I2 NO APLICA CW02A0I2 BA02A0I2H 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Design, Installation and Test" from ASME B31.8. 3 Wall thickness showed up correspond to F (design factor) : 0 72 E (joint factor) : 1 and T ( temperature factor): 1; in any other case wall S E A L S 18 S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T W = WELDOLET T = TEE 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 826 " Inspection of Welds" ASME B31.8 -2007. NOMENCLATURA 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings shall be used only for water service and instrument air. For the interface mechanical / Instrumentation interfase valves shalll be threaded to connect fitting required. 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. H E A D S = SOCKOLET 3. Wall thickness showed up correspond to F (design factor) : 0,72, E (joint factor) : 1, and T ( temperature factor): 1; in any other case, wall thickness must be re-calculated to ASME B31.8 and according to "Location class", besides consideration of metal temperature and pipe manufacturing. ECP-VST-G-GEN-FT-001 715/761 TAG CLASS @ @ OPERATION ( 1 ) TEMP. ºF 670 DESING CODE SERVICE: 20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG)AA2A31 300 B31.8 DESIGN 740 PRESSURE. (PSIG) CORROSION ALLOWANCE (Inch) 0 125 Transporte de Gas ANSI CLASS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 @ DN (pulg) TAG BA04H0I1J BA04F0I1J BA04J0I1J 2" - 10" BA02A0I2J 12" - 30" BA02A0F2J GA04H0I1J GA04F0I1J GA04J0I1J 2" - 10" GA02A0I2J VALVE TYPE VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 300# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. Ball Valve, Class 800#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. Ball Valve, Class 300# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Devlon Seats, Lever Operator. Design code API 6D. Ball Valve, Class 800#, Screwed Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Design code API 6D, testing according to API 598. Ball Valve, Class 800#, SW x Screwed Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with one (1) nipple A106 Gr B Sch. 40 6" lenght at SW end. Design code API 6D, testing according to API 598. B A L L 1/2" - 1 1/2" 670 -20 A 100 °FCORROSION ALLOWANCE (Inch) 0,125 Gate Valve, Class 800#, Screwed Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 800#, SW x Screwed Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. G A T E 1/2" - 1 1/2" Gate Valve, Class 800#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve Class 300# Raised Face Flanged Ends with Bolted Bonnet Outside Screw & Yoke rising Stem Flexible Wedge Disc Cast Carbon Steel ASTM A216 Gr WCB Body And Bonnet Trim 8 Graphite Packing Gear Operator on 12" & Larger Flanges ASME B16 5 up to 24" ASME B16 47 series A on larger than 24" Design code Gate Valve, Class 300# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. 12" - 30" GA02A0B2J 12" - 30" GA02A0B2L GL04H0I2 GL04F0I2 2" - 10" GL02A0I2 12" - 30" GL02A0B2 CK04H0I2 CK04F0I2 2" - 4" CK02A0I2 6" - 24" CK02A0B2 6" - 24" CK02A0B2L 2" - 4" CW02A0I2 6 - 24 CW02A0B2 D L E 1/2" - 1 1/2" NE13H0I Check Valve, Class 800#, Screwed Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 300#, FULL-OPENING, Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 300# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. C H E C K 1/2" - 1 1/2" Check Valve, Class 800#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 300# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 300# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Neddle valve, 3000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Ch k V l Cl 300# R i d F Fl d E d W f T R l bl Cl & t C t C b St l ASTM A216 G WCB B d T i 8 St llit S t N l S l D i d API 6D t ti di t API 598 Globe Valve, Class 300# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24" Design code ASME B16.34, testing according to API 598. Globe Valve, Class 300# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. Globe Valve, Class 800#, Screwed Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. G L O B E 1/2" - 1 1/2" Globe Valve, Class 800#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. G Gate Valve, Class 300# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. Gate Valve, Class 300#, THRU CONDUIT, Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. N E E D 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA02A0I2H 12" - 30" BA02A0F2HD O U B L E B L O C K & B L E E D Double Block and Bleed Ball Valve, Class 300# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. Integral Monoflange Valve, 2500# RFxNPT, Double Block & Bleed Valve, Needle Blocks and Vent, Flanged (process) x Threaded connections; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. Double Block and Bleed Ball Valve , Class 300# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Devlon Seats, Lever Operator.Design code API 6D. ECP-VST-G-GEN-FT-001 716/761 TAG CLASE @ @ 1/2 0,438" 0,469"STD. WT. 0,406" DN (Pulgadas) TAG ELEMENTOS 3/4 1,062"0,812" 0,938"0,688"0,5" 0,625" 363018 4216 242061 SCH. 160. 14123 4 -20 A 100 °F 8 10 -20 A 100 °F@ TEMP. ºF 48 MAWP (PSIG)300 PRESIÓN (PSIG) 21-1/2 TEMP. ºFMAOP (PSIG)Transporte de Gas OPERACIÓN ( 1 ) 670 -20 A 100 °F 740 0,125 CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 B31.8 DISEÑONORMA DISEÑO 925 AA2A31 Versión 1 CLASE ANSI PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGÍA CORPORATIVO DE NORMAS Y ESTÁNDARES PRUEBA HIDROSTATICA ( 2 )TEMP. ºF CORROSIÓN PERMISIBLE (Pulg.) SERVICIO: CLASE 300, ASTM A515 Gr. 70, ASME B16.48. CLASE 300, 1/8" ESPIROMETÁLICA, BRIDAS DE ORIFICIO ASTM A106 Gr. B, PBE CIEGOS CLASE 3000, SOCKOLET, A105, MSS SP-97 CLASE 3000, SW, ASTM A105, ASME B16.11( 5 ) CLASE 300, RF, A105, ASME B16.5. ACCESORIOS ( 4 ) ESPACIADORES (BLANKS) CLASE 300 1/8" ESPIROMETÁLICA Sólo CLASE 300, RF WN, A105, ASME B16.47 Serie A, espesor pared igual al del tubo. WELDOLET, ASTM A105, MSS SP-97, Extremos de acuerdo a espesores de Cabezal y ramal. ASTM A234 Gr. WPBW (con costura), ASME B16.9, espesor de pared igual al del tubo. CLASE 300, RF, A105, ASME B16.47 Serie A. CLASE 300, RF WN, A105, ASME B16.47 Serie A, espesor pared igual al del tubo. CLASE 300, RF WN, A105, ASME B16.36, espesor de pared igual al del tubo. CLASE 300, RF SW, ASTM A105, ASME B16.5 NO APLICA CLASE 300, RF WN, A105, ASME B16.5, espesor de pared igual al del tubo. ASTM A234 Gr. WPB (SMLS), ASME B16.9, espesor de pared igual al del tubo. O´LETS CLASE 300, ASTM A515 Gr. 70, diseño por ASME B31.3 API 5L Gr. B, SMLS API 5L Gr. B, ERW/DSAW BRIDAS TUBERÍA ( 3 y 4 ) CLASE 3000, THRD, ASTM A105, ASME B16.11 NO APLICA NO APLICA NO APLICA CLASE 300, 1/8" ESPIROMETÁLICA, Anillos interno y externo 304 SS, Relleno de Grafito,ASME B16.20, para brida ASME B16.5. TAPONES y BUSHINGS NO APLICAASTM A234, MSS SP-95, Extremos según tubos a soldar (PBE ó BE x PE). CLASE 3000, SW, ASTM A105, MSS SP-83 NO APLICA Espárragos ASTM A193 Gr. B7, con par de tuercas pesadas de cabeza hexagonal ASTM A194 Gr. 2H Anillos interno y externo 304 SS, Relleno de Grafito, ASME B16.20, para brida ASME B16.47 Serie A. SCH. 160, ASTM A106 Gr. B, PBE NO APLICA COUPLINGS REDUCTORES CLASE 3000, SW, ASTM A105, MSS SP-79 COUPLINGS (ACOPLES) CLASE 3000, SW, ASTM A105, ASME B16.11 SWAGES (BOTELLAS) ESPARRAGOS / TUERCAS NIPLES EMPAQUES UNIONES CLASE 300, 1/8 ESPIROMETÁLICA, Sólo Anillo interno 304 SS, Relleno de Grafito, ASME B16.20. ECP-VST-G-GEN-FT-001 717/761 BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" S S S S W W W W W W W W W R R R R R R R T NOTAS: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T BA04H0I1J / BA04F0I1J / BA04J0I1J BA02A0I2J BA02A0F2J GA02A0I2J GA02A0B2J / GA02A0B2L GL02A0I2 GL02A0B2 CW02A0B2 ESPECIAL BA12K5I2H NO APLICA V Á L V U L A S ( 6 ) GA04H0I1J / GA04F0I1J / GA04J0I1J BLOQUEO GL04H0I2 / GL04F0I2 S E L L O CK02A0I2 NO APLICA CW02A0I2 CK04H0I2 / CK04F0I2 DIAMETRO CONEXIÓN 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. Completar por Instrumentación. BA02A0F2H RETENCIÓN BA02A0I2H CK02A0B2 / CK02A0B2L ALIVIO 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Diseño Instalación y Pruebas del código A L NE13H0I Completar por Instrumentación. 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T S = SOCKOLET W = WELDOLET 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, E (factor de junta): 1, y T (factor por temperatura): 1; para cualquier otro caso estos espesores deberán ser re-calculados de acuerdo a ASME B31.8 y según la clase de locación (Location Class), aparte de las consideraciones por temperatura del metal y método de fabricación del tubo. particulares del proyecto y para que cumplan con los requerimientos del capítulo de Diseño, Instalación y Pruebas del código B31 8 NOMENCLATURA 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados deben ser usados sólo para servicio de agua y aire para instrumentación . Para la interfase Mecánica / Instrumentación las válvulas serán roscadas al accesorio de conexión requerido. T = TEE D I A M E T R O C A B E Z A 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 826 "Inspección de Soldadura" de ASME B31.8-2007. ECP-VST-G-GEN-FT-001 718/761 TAG @ @ PIPING MATERIAL SPECIFICATION GERENCIA DE DESARROLLO DE TRANSPORTE VICEPRESIDENCIA DE TRANSPORTE Y LOGÍSTICA CÓDIGO CNE ECP-VST-P-MET-ET-006 Elaborado 25/03/2011 Versión 1 AA2A31 300 B31.8 DISEÑO 740 PRESIÓN(PSIG) CORROSION PERMITIDA (Inch) 0,125 Transporte de Gas ANSI CLASE OPERACIÓN ( 1 ) TEMP. ºF 670 CÓDIGO DE DISEÑO SERVICIO: -20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG) TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) ÓDN (pulg) TAG BA04H0I1J BA04F0I1J BA04J0I1J 2" - 10" BA02A0I2J 12" - 30" BA02A0F2J GA04H0I1J GA04F0I1J GA04J0I1J 2" - 10" GA02A0I2J Válvula de compuerta, Clase 800#, extremos roscados, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a Válvula de compuerta, Clase 800#, extremos roscado x socket, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. O M P U E R T A 1/2" - 1 1/2" Válvula de compuerta, Clase 800#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 300# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598. TIPO DESCRIPCIÓN Válvula de bola, Clase 300# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula de bola, Clase 800#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 40 de 6" de longitud. Código de diseño API 6D, probada según API 598. Válvula de bola, Clase 300# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. Válvula de bola, Clase 800#, extremos roscados, bola flotante; acceso por los extremos, asientos y bola reemplazables; cuerpo y cubierta de acero al carbón forjado ASTM A-105; internos 316 SS, a prueba de fuego según API 607; asientos de teflon reforzado; operada por palanca; paso normal. código de diseño API 6D, probada según API 598. Válvula de bola, Clase 800#, extremos roscado x socket, bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta an acero al carbón forjado ASTM A-105; internos en 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanca; paso normal. Suministrada con dos niples A106 Gr B Sch. 40 de 6" de longitud. Código de diseño API 6D, probada según API 598. B O L A 1/2" - 1 1/2" 12" - 30" GA02A0B2J 12" - 30" GA02A0B2L GL04H0I2 GL04F0I2 2" - 10" GL02A0I2 12" - 30" GL02A0B2 CK04H0I2 CK04F0I2 2" - 4" CK02A0I2 6" - 24" CK02A0B2 6" - 24" CK02A0B2L 2" - 4" CW02A0I2 C O Válvula de compuerta, Clase 300# RF extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. 6D, pruebas de acuerdoa API 598. Válvula de compuerta, Clase 300# RF extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. Válvula de globo, Clase 300# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A en tamaños mayores a 24". Design code ASME B16.34, probada de acuerdo a API 598. Válvula de globo, Clase 300# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de globo, Clase 800#, extremos roscados, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de G L O B O 1/2" - 1 1/2" Válvula de globo, Clase 800#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de Válvula de retención, Clase 300# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo Válvula de retención, Clase 800#, extremos roscados, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 300# RF, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 300# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. R E T E N C I Ó N 1/2" - 1 1/2" Válvula de retención, Clase 800#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 300# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. 6" - 24" CW02A0B2 A G U J A 1/2" - 1 1/2" NE13H0I 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA02A0I2H 12" - 30" BA02A0F2HD O B L E B L O Q U E O & P U R G A Válvula de Doble Bloqueo & Purga, Clase 300# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API Válvula de aguja, 3000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula de retención, Clase 300# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula integral monobrida, 2500# RFxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. Válvula de Doble Bloqueo & Purga, Clase 300# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. ECP-VST-G-GEN-FT-001 719/761 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES TAG CLASS @ @ 1/2 DN (Inches) TAG ELEMENTS 3/4 123 BLINDS CLASS 3000, SW, ASTM A105, ASME B16.11( 5 CLASS 300, RF, A105, ASME B16.5. CLASS 300, RF, A105, ASME B16.47 Series A. ASTM A234 Gr. WPBW (welded seam), ASTM A234 Gr WPB (SMLS) ASME B16 9 wall thicknes to match pipeFITTINGS ( 4 ) 0,812" 0,938" 1,062"0,438" 0,469" 0,5" 0,625"SCH. 160. STD. WT. 0,406" CLASS 300, RF WN, A105, ASME B16.47 Series A, bore to match pipe.ORIFICE FLANGES ASTM A106 Gr. B, PBE FLANGES PIPING ( 3 y 4 ) API 5L Gr. B, SMLS CLASS 300, RF WN, A105, ASME B16.36, bore to match pipe. CLASS 300, RF WN, A105, ASME B16.5, wall thicknes to match pipe. CLASE 300, RF SW, ASTM A105, ASME B16.5 NOT APPLY API 5L Gr. B, ERW/DSAW CLASS 300, RF WN, A105, ASME B16.47 Series A, wall thickness to match pipe. 0,688" TEMP. ºF 300 @0,125CORROSION ALLOWANCE (Inch) TEMP. ºF 42 4824 304 61 821-1/2 18 362016 -20 A 100 °F 1410 PRESSURE (PSIG) DESIGN MAOP (PSIG) OPERATION ( 1 ) -20 A 100 °F B31.4 DESIGN CODE 925 SERVICE: -20 A 100 °FAA2A32 670 ANSI CLASS 740 TEMP. ºF MAWP (PSIG)Líquids Transportation HIDROSTATIC TEST ( 2 ) NOT APPLY NIPPLES SCH. 160, ASTM A106 Gr. B, PBE NOT APPLY ASTM A234, MSS SP-95, Ends to match pipes (PBE ó BE x PE).SWAGES CLASS 3000, SW, ASTM A105, MSS SP-83 GASKETS CLASE 300, 1/8" ESPIROMETÁLICA, Only Inner Ring 304 SS, Grafhite Filler, ASME B16.20. CLASS 300, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.5. CLASS 300, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.47 Series A. NOT APPLY STUD BOLTS / NUTS NOT APPLY NOT APPLY COUPLINGS CLASS 3000, SW, ASTM A105, ASME B16.11 NOT APPLY PLUGS & BUSHINGS REDUCER COUPLINGS CLASS 3000, THRD, ASTM A105, ASME B16.11 CLASS 3000, SW, ASTM A105, MSS SP-79 Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2H UNIONS CLASS 3000, SW, ASTM A105, ASME B16.11 ) WELDOLET, ASTM A105, MSS SP-97, Ends to match Head and Branch Piping.CLASS 3000, SOCKOLET, A105, MSS SP-97O´LETS CLASE 300, ASTM A515 Gr. 70, ASME B16.48. ASTM A234 Gr. WPBW (welded seam), ASME B16.9, wall thicknes to match pipe.ASTM A234 Gr. WPB (SMLS), ASME B16.9, wall thicknes to match pipe.FITTINGS ( 4 ) CLASE 300, ASTM A515 Gr. 70, according to ASME B31.3BLANKS ECP-VST-G-GEN-FT-001 720/761 CODIGO Elaborado Versión PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES TAG CLASS @ @ TEMP. ºF 300 @0,125CORROSION ALLOWANCE (Inch) TEMP. ºF -20 A 100 °F PRESSURE (PSIG) DESIGN MAOP (PSIG) OPERATION ( 1 ) -20 A 100 °F CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 B31.4 DESIGN CODE 925 SERVICE: -20 A 100 °FAA2A32 670 ANSI CLASS 740 TEMP. ºF MAWP (PSIG)Líquids Transportation HIDROSTATIC TEST ( 2 ) BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T CK04H0I2 / CK04F0I2 CW02A0B2 CHECK NO APLICA CK02A0I2 S E A L S Instrumentation must complete this description. NE13H0I NO APLICA CW02A0I2 V Á L V E S ( 6 ) RELIEF BRANCH CK02A0B2 / CK02A0B2L BA02A0F2H BA04H0I1J / BA04F0I1J / BA04J0I1J SPECIAL BA12K5I2H BA02A0I2J BLOCK GL04H0I2 / GL04F0I2 GL02A0I2 Instrumentation must complete this description. BA02A0I2H BA02A0F2J GA04H0I1J / GA04F0I1J / GA04J0I1J GL02A0B2 GA02A0I2J GA02A0B2J / GA02A0B2L 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Inspection and Testing" from ASME B31.4. NOMENCLATURA 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings shall be used only for water service and instrument air. For the interface mechanical / Instrumentation interfase valves shalll be threaded to connect fitting required. H E A D S = SOCKOLET 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 434.8.5 "Required Inspection and Acceptance Criteria" ASME B31.4-2006. 3. Wall thickness showed up correspond to F (design factor) : 0,72, and E (joint factor) : 1; in any other case, wall thickness must be calculated according to ASME B31.4 and pertinent design factor F, which could be lower than 0.72 (ASME B31.4-2006, 402.3.1 (h)) depending on special service conditions or location, but never will be upper than this value (ASME B31.4-2006, 402.3.1 (a)). W = WELDOLET T = TEE ECP-VST-G-GEN-FT-001 721/761 TAG CLASS @ PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 AA2A32 300 B31.4 DESIGN 740 PRESSURE. (PSIG) Líquids Transportation ANSI CLASS OPERATION ( 1 ) TEMP. ºF DESIGN CODE SERVICE: 100 TEMP. ºF MAX. PRESIÓN (PSIG) @ DN (pulg) TAG BA04H0I1J BA04F0I1J BA04J0I1J 2" - 10" BA01A0I2J 12" - 30" BA01A0F2J GA04H0I1J GA04F0I1J GA04J0I1J 2" - 10" GA01A0I2J Gate Valve, Class 800#, Screwed Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 800#, SW x Screwed Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. A T E 1/2" - 1 1/2" Gate Valve, Class 800#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 300# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. CORROSION ALLOWANCE (Inch) 0,125 670 -20 A 100 °F VALVE TYPE VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 300# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. Ball Valve, Class 800#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. Ball Valve, Class 300# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Devlon Seats, Lever Operator. Design code API 6D. Ball Valve, Class 800#, Screwed Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Design code API 6D, testing according to API 598. Ball Valve, Class 800#, SW x Screwed Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with one (1) nipple A106 Gr B Sch. 40 6" lenght at SW end. Design code API 6D, testing according to API 598. B A L L 1/2" - 1 1/2" 12" - 30" GA01A0B2J 12" - 30" GA01A0B2L GL04H0I2 GL04F0I2 2" - 10" GL01A0I2 12" - 30" GL01A0B2 CK04H0I2 CK04F0I2 2" - 4" CK01A0I2 6" - 24" CK01A0B2 6" - 24" CK01A0B2L 2" - 4" CW01A0I2 6" - 24" CW01A0B2 E E D L E 1/2" - 1 1/2" NE13H0I G A Gate Valve, Class 300# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. g g g y p g g g g Gate Valve, Class 300#, THRU CONDUIT, Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. Globe Valve, Class 300# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24" Design code ASME B16.34, testing according to API 598. Globe Valve, Class 300# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. Globe Valve, Class 800#, Screwed Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. G L O B E 1/2" - 1 1/2" Globe Valve, Class 800#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. Check Valve, Class 300# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Neddle valve, 3000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Check Valve, Class 300# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 800#, Screwed Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 300#, FULL-OPENING, Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 300# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. C H E C K 1/2" - 1 1/2" Check Valve, Class 800#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 300# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. N E 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA01A0I2H 12" - 30" BA01A0F2HD O U B L E B L O C K & B L E E D Double Block and Bleed Ball Valve, Class 300# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. Integral Monoflange Valve, 2500# RFxNPT, Double Block & Bleed Valve, Needle Blocks and Vent, Flanged (process) x Threaded connections; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. Double Block and Bleed Ball Valve , Class 300# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Devlon Seats, Lever Operator.Design code API 6D. ECP-VST-G-GEN-FT-001 722/761 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES PIPING MATERIAL SPECIFICATION CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 TAG CLASE @ @ 1/2 AA2A32 DISEÑO TEMP. ºF B31.4 NORMA DISEÑOCLASE ANSI 925 -20 A 100 °F @ MAWP (PSIG) CORROSIÓN PERMISIBLE (Pulg.) PRESIÓN (PSIG) Transporte de Hidrocarburos Líquidos PRUEBA HIDROSTATICA ( 2 ) TEMP. ºF OPERACIÓN ( 1 ) -20 A 100 °F -20 A 100 °F SERVICIO: 0,125 740 TEMP. ºF 4821-1/2 6 141081 300 MAOP (PSIG) 670 4 18 0,625" 2416 42 CLASE 300, RF WN, A105, ASME B16.47 Serie A, espesor pared igual al del tubo.NO APLICA CLASE 300, RF WN, A105, ASME B16.36, espesor de pared igual al del tubo. 30 ASTM A106 Gr. B, PBE API 5L Gr. B, ERW/DSAW 36 0,812" 0,938" DN (Pulgadas) TAG ELEMENTOS 3/4 123 CLASE 300, RF WN, A105, ASME B16.47 Serie A, espesor pared igual al del tubo. BRIDAS DE ORIFICIO BRIDAS CLASE 300, RF WN, A105, ASME B16.5, espesor de pared igual al del tubo.CLASE 300, RF SW, ASTM A105, ASME B16.5 CLASE 300, RF, A105, ASME B16.47 Serie A. SCH. 160. STD. WT. 0,406" 0,438" TUBERÍA ( 3 y 4 ) 20 1,062"0,688"0,469" 0,5" API 5L Gr. B, SMLS CIEGOS CLASE 300, RF, A105, ASME B16.5. ASTM A234 Gr. WPBW (con costura), ASME B16 9 espesor de pared igual al delACCESORIOS ( 4 ) CLASE 3000, SW, ASTM A105, ASME B16.11( 5 ASTM A234 Gr WPB (SMLS) ASME B16 9 espesor de pared igual al del tubo EMPAQUES CLASE 3000, SW, ASTM A105, ASME B16.11 CLASE 3000, SW, ASTM A105, MSS SP-83 NO APLICA NIPLES UNIONES ASME B16.9, espesor de pared igual al del tubo. ESPARRAGOS / TUERCAS SCH. 160, ASTM A106 Gr. B, PBE CLASE 300, 1/8" ESPIROMETÁLICA, Anillos interno y externo 304 SS, Relleno de Grafito, ASME B16.20, para brida ASME B16.47 Serie A. CLASE 300, ASTM A515 Gr. 70, ASME B16.48. CLASE 300, ASTM A515 Gr. 70, diseño por ASME B31.3ESPACIADORES (BLANKS) NO APLICA CLASE 300, 1/8" ESPIROMETÁLICA, Sólo Anillo interno 304 SS, Relleno de Grafito, ASME B16.20. CLASE 300, 1/8" ESPIROMETÁLICA, Anillos interno y externo 304 SS, Relleno de Grafito,ASME B16.20, para brida ASME B16.5. ACCESORIOS ( 4 ) CLASE 3000, SW, ASTM A105, ASME B16.11 ) ASTM A234 Gr. WPB (SMLS), ASME B16.9, espesor de pared igual al del tubo. SWAGES (BOTELLAS) COUPLINGS (ACOPLES) TAPONES y BUSHINGS CLASE 3000, THRD, ASTM A105, ASME B16.11 O´LETS WELDOLET, ASTM A105, MSS SP-97, Extremos de acuerdo a espesores de Cabezal y ramal.CLASE 3000, SOCKOLET, A105, MSS SP-97 NO APLICA NO APLICACLASE 3000, SW, ASTM A105, MSS SP-79 NO APLICA NO APLICAASTM A234, MSS SP-95, Extremos según tubos a soldar (PBE ó BE x PE). Espárragos ASTM A193 Gr. B7, con par de tuercas pesadas de cabeza hexagonal ASTM A194 Gr. 2H COUPLINGS REDUCTORES ECP-VST-G-GEN-FT-001 723/761 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES PIPING MATERIAL SPECIFICATION CODIGO Elaborado Versión TAG CLASE @ @ AA2A32 DISEÑO TEMP. ºF B31.4 NORMA DISEÑOCLASE ANSI 925 -20 A 100 °F @ MAWP (PSIG) CORROSIÓN PERMISIBLE (Pulg.) PRESIÓN (PSIG) Transporte de Hidrocarburos Líquidos PRUEBA HIDROSTATICA ( 2 ) TEMP. ºF OPERACIÓN ( 1 ) -20 A 100 °F -20 A 100 °F SERVICIO: 0,125 740 TEMP. ºF300 MAOP (PSIG) 670 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" S S S S W W W W W W W W W R R R R R R R T NOTAS: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T Completar por Instrumentación. DIAMETRO CONEXIÓN CK02A0B2 / CK02A0B2L BA02A0F2H GL04H0I2 / GL04F0I2 BA02A0F2J Completar por Instrumentación. GA04H0I1J / GA04F0I1J / GA04J0I1J ALIVIO V Á L V U L A S ( 6 ) BA02A0I2H CK04H0I2 / CK04F0I2 BA02A0I2J BA04H0I1J / BA04F0I1J / BA04J0I1J GA02A0I2J GA02A0B2J / GA02A0B2L GL02A0I2 CW02A0B2 GL02A0B2 RETENCIÓN NO APLICA CK02A0I2 NO APLICA ESPECIAL BA12K5I2H BLOQUEO NE13H0I CW02A0I2 S E L L O 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T W = WELDOLET T = TEE 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 434.8.5 "Inspección Requerida y Criterios de Aceptación de Soldadura" de ASME B31.4-2006. 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. NOMENCLATURA 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. S = SOCKOLET 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados deben ser usados sólo para servicio de agua y aire para instrumentación . Para la interfase Mecánica / Instrumentación las válvulas serán roscadas al accesorio de conexión requerido. 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Inspección y Pruebas del código B31.4. D I A M E T R O C A B E Z A L 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, y E (factor de junta): 1; para cualquier otro caso estos espesores de pared deberán ser calculados de acuerdo a ASME B31.4 y según el factor de diseño F que en caso de consideraciones especiales de servicio o de Localidad (Location) podría ser menor a 0.72 (ASME B31.4-2006, 402.3.1 (h)) , pero en ningún caso podrá ser superior a este valor (ASME B31 4-2006 402 3 1 (a)) ECP-VST-G-GEN-FT-001 724/761 TAG CLASS @ OPERATION ( 1 ) TEMP. ºF DESING CODE SERVICE: 100 TEMP. ºF MAX. PRESIÓN (PSIG)AA2A32 300 B31.4 DESIGN 740 PRESSURE. (PSIG) Transporte de Hidrocarburos Líquidos ANSI CLASS PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 @ DN (pulg) TAG BA04H0I1J BA04F0I1J BA04J0I1J 2" - 10" BA02A0I2J 12" - 30" BA02A0F2J GA04H0I1J GA04F0I1J GA04J0I1J 2" - 10" GA02A0I2J TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN Válvula de bola, Clase 300# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula de bola, Clase 800#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 40 de 6" de longitud. Código de diseño API 6D, probada según API 598. Válvula de bola, Clase 300# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. Válvula de bola, Clase 800#, extremos roscados, bola flotante; acceso por los extremos, asientos y bola reemplazables; cuerpo y cubierta de acero al carbón forjado ASTM A-105; internos 316 SS, a prueba de fuego según API 607; asientos de teflon reforzado; operada por palanca; paso normal. código de diseño API 6D, probada según API 598. Válvula de bola, Clase 800#, extremos roscado x socket, bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta an acero al carbón forjado ASTM A-105; internos en 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanca; paso normal. Suministrada con dos niples A106 Gr B Sch. 40 de 6" de longitud. Código de diseño API 6D, probada según API 598. B O L A 1/2" - 1 1/2" 670 -20 A 100 °FCORROSION ALLOWANCE (Inch) 0,125 Válvula de compuerta, Clase 800#, extremos roscados, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 800#, extremos roscado x socket, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. P U E R T A 1/2" - 1 1/2" Válvula de compuerta, Clase 800#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 300# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de d API 598 12" - 30" GA02A0B2J 12" - 30" GA02A0B2L GL04H0I2 GL04F0I2 2" - 10" GL02A0I2 12" - 30" GL02A0B2 CK04H0I2 CK04F0I2 2" - 4" CK02A0I2 6" - 24" CK02A0B2 6" - 24" CK02A0B2L 2" - 4" CW02A0I2 6" - 24" CW02A0B2 G U J A 1/2" - 1 1/2" NE13H0I Válvula de retención, Clase 800#, extremos roscados, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 300# RF, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 300# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. R E T E N C I Ó N 1/2" - 1 1/2" Válvula de retención, Clase 800#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 300# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 300# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de aguja, 3000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula de retención, Clase 300# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de globo, Clase 300# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A en tamaños mayores a 24". Design code ASME B16.34, probada de acuerdo a API 598. Válvula de globo, Clase 300# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de globo, Clase 800#, extremos roscados, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, G L O B O 1/2" - 1 1/2" Válvula de globo, Clase 800#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, C O M P Válvula de compuerta, Clase 300# RF extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. acuerdoa API 598 Válvula de compuerta, Clase 300# RF extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. A G 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA02A0I2H 12" - 30" BA02A0F2HD O B L E B L O Q U E O & P U R G A Válvula de Doble Bloqueo & Purga, Clase 300# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula integral monobrida, 2500# RFxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. Válvula de Doble Bloqueo & Purga, Clase 300# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. ECP-VST-G-GEN-FT-001 725/761 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES TAG CLASS @ @ 1/2 B31.8 DESIGN CODE -20 A 100 °F TEMP. ºF OPERATION ( 1 ) -20 A 100 °F PRESSURE (PSIG) HIDROSTATIC TEST ( 2 ) 1850 TEMP. ºF CORROSION ALLOWANCE (Inch) ANSI CLASS 600 DESIGNSERVICE: 1480 -20 A 100 °F 0,125 PIPING ( 3 y 4 ) 16 DN (Inches) TAG ELEMENTS AC3A31 TEMP. ºF MAOP (PSIG) @ MAWP (PSIG) 1380 42 481412 0,625" 0,75" 20 24 30 36 Gas Transmission 0,406" 0,437" 0,469" 0,562" ASTM A860 Gr. WPHY65 (seamless), ASME B16.9, wall CLASS 600, RF WN, ASTM A694 Gr. F65 , ASME B16.36, bore to match pipe. CLASS 600, RF WN, A694 Gr. F65, ASME B16.47 Series A, bore to match pipe. 3/4 3 8 1861-1/2 API 5L Gr. 65, ERW/DSAW 0,812" 0,938" 2 41 10 CLASS 600, RF WN, ASTM A694 Gr. F65 , ASME B16.5, bore to match pipe.FLANGES BLINDS NOT APPLY CLASS 6000 SW A105 ASME B16 11( 5 ) ORIFICE FLANGES CLASS 600, RF, ASTM A105, ASME B16.5. CLASS 600, RF SW, ASTM A105, ASME B16.5. CLASS 600, RF WN, ASTM A105, ASME B16.5, bore to match pipe. CLASS 600, RF, ASTM A694 Gr. F65, ASME B16.47 Series A. CLASS 600, RF WN, A694 Gr. F65, ASME B16.47 Series A, bore to match pipe. ASTM A860 Gr. WPHY65 (welded seam), CLASS 600, RF WN, ASTM A105, ASME B16.5, bore to match pipe.CLASS 600, RF SW, ASTM A105, ASME B16.5. ASTM A234 WPB (SMLS) ASME B16 9 wall thicknes to match pipeFITTINGS ( 4 ) CLASS 600, RF, ASTM A694 Gr. F65 , ASME B16.5. SCH. 160 ASTM A106 Gr. B, PBE. API 5L Gr. B, SMLS. API 5L Gr. 65, SMLS. XS WT. STD WT. ASTM A860 Gr. WPHY65 (seamless), ASME B16.9, wall thicknes to match pipe. CLASS 600, ASTM A515 Gr. 70, design to ASME B16.47 Series A & ASME B31.3 CLASS 6000, SW, A105, ASME B16.11( 5 ) ASTM A860 Gr. WPHY65 (welded seam), ASME B16.9, wall thicknes to match pipe. BLANKS O´LETS CLASS 600, ASTM A515 Gr. 70, ASME B16.48. ASTM A234 WPB (SMLS), ASME B16.9, wall thicknes to match pipe.FITTINGS ( 4 ) CLASS 6000, Sockolet, A105, MSS SP-97, ends to match Head and Branch Piping. WELDOLET, ASTM A860 Gr. WPHY65 , MSS SP-97, Ends to match Head and Branch Piping. UNIONS ASTM A106 Gr. B, SCH. 160, PBE. CLASS 300, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.47 Series A. NOT APPLY PROHIBITED for this class. NOT APPLY GASKETS CLASS 600, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.5. NIPPLES STUD BOLTS / NUTS Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2H SWAGES NOT APPLYASTM A234, MSS SP-95, Ends to match pipes (PBE ó BE x PE). PLUGS & BUSHINGS NOT APPLYPROHIBITED, to use blind instead plug. CLASE 6000, SW, ASTM A105, ASME B16.11COUPLINGS NOT APPLY REDUCER COUPLINGS CLASE 6000, SW, ASTM A105, MSS SP-79 NOT APPLY ECP-VST-G-GEN-FT-001 726/761 CODIGO Elaborado Versión: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES TAG CLASS @ @ CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 B31.8 DESIGN CODE -20 A 100 °F TEMP. ºF OPERATION ( 1 ) -20 A 100 °F PRESSURE (PSIG) HIDROSTATIC TEST ( 2 ) 1850 TEMP. ºF CORROSION ALLOWANCE (Inch) ANSI CLASS 600 DESIGNSERVICE: 1480 -20 A 100 °F 0,125 AC3A31 TEMP. ºF MAOP (PSIG) @ MAWP (PSIG) 1380 Gas Transmission BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T GA03A0I2J GA03A0B2J / GA03A0B2L CK03A0I2 GL03A0I2 GL03A0B2 BA03A0I2J NO APLICA RELIEF SPECIAL BA12K5I2H 1 Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project NE15H0I Instrumentation must complete this description. V Á L V E S ( 6 ) CHECK S E A L S BA03A0F2HBA03A0I2H Instrumentation must complete this description. BRANCH CK04F0I2 NO APLICA BA12F0I1J GA04F0I1J BLOCK GL04F0I2 CW03A0B2 CW03A0I2 CK03A0B2 / CK03A0B2L BA03A0F2J 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T NOMENCLATURA S = SOCKOLET H E A D W = WELDOLET T = TEE 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Design, Installation and Test" from ASME B31.8. 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 826 " Inspection of Welds" ASME B31.8 -2007. 3. Wall thickness showed up correspond to F (design factor) : 0,72, E (joint factor) : 1, and T ( temperature factor): 1; in any other case, wall thickness must be re-calculated to ASME B31.8 and according to "Location class", besides consideration of metal temperature and pipe manufacturing. 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings are prohibited for this class. For the interface mechanical / Instrumentation valves shalll be monoflange type (flange x NPT), flange to connect process side and thread FNPT for instrument side; likewise for Temocouplas arrange shall be flanged. All conecctions shall use insulation Kits and valves shall be DB&B type, 316SS body and trim. ECP-VST-G-GEN-FT-001 727/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 TAG CLASS @ @ DN (pulg) TAG 1/2" - 1 1/2" BA12F0I1J 2" - 10" BA03A0I2J 12" - 30" BA03A0F2J 1/2" - 1 1/2" GA04F0I1J 2" - 10" GA03A0I2J 12" - 30" GA03A0B2J TEMP. ºF ANSI CLASS DESIGN Gas Transmission DESING CODE SERVICE: 1001480B31.8 VALVE TYPE Gate Valve, Class 800#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 600# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24". Design code API 6D, testing according to API 598. Gate Valve, Class 600# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. G A T E Ball Valve, Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Devlon Seats, Lever Operator. Design code API 6D. VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24". Design code API 6D. Ball Valve, Class 2500#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. B A L L -20 A 100 °F AC3A31 600 OPERATION ( 1 ) TEMP. ºF 1380 MAX. PRESIÓN (PSIG) CORROSION ALLOWANCE (Inch) PRESSURE. (PSIG) 0,125 12" - 30" GA03A0B2L 1/2" - 1 1/2" GL04F0I2 2" - 10" GL03A0I2 12" - 30" GL03A0B2 1/2" - 1 1/2" CK04F0I2 2" - 4" CK03A0I2 6" - 24" CK03A0B2 6" - 24" CK03A0B2L 2" - 4" CW03A0I2 6" - 24" CW03A0B2 N E E D L E 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA03A0I2H G L O B E Globe Valve, Class 600# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24" Design code ASME B16.34, testing according to API 598. Globe Valve, Class 600# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. Globe Valve, Class 800#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. D O U B L E L O C K & B L E E D Check Valve, Class 600#, FULL-OPENING, Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 600# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. C H E C K Check Valve, Class 800#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 600# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Neddle valve, 6000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Double Block and Bleed Ball Valve Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted) Trunnion mounted ball Side Entry Bolted Bonnet Non-Lubricated Replaceable Ball And Seats Cast Carbon Steel ASTM A216 Gr WCB Body And Bonnet CS + ENP (3mils to ASTM B733) Ball Fire Safe Double Block and Bleed Ball Valve , Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Devlon Seats, Lever Operator.Design code API 6D. Check Valve, Class 600# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Integral Monoflange Valve, 2500# RFxNPT, Double Block & Bleed Valve, Needle Blocks and Vent, Flanged (process) x Threaded connections; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. Check Valve, Class 600# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Gate Valve, Class 600#, THRU CONDUIT, Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24". Design code API 6D, testing according to API 598. 24 . Design code API 6D, testing according to API 598. 12" - 30" BA03A0F2HD O B L B Double Block and Bleed Ball Valve, Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. ECP-VST-G-GEN-FT-001 728/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 TAG CLASE @ @ 1/2 BRIDAS DE ORIFICIO NO APLICA ASTM A106 Gr. B, PBE. 0,75" 0,812" CLASE 600, RF WN, ASTM A105, ASME B16.5, agujero igual al del tubo. CLASE 600, RF, ASTM A694 Gr. F65 , ASME B16.5. 0,625" 0,938" API 5L Gr. 65, ERW/DSAW CLASE 600, RF WN, ASTM A105, ASME B16.5, agujero igual al del tubo. CLASE 600, RF WN, ASTM A694 Gr. F65 , ASME B16.36, agujero igual al del tubo. CLASS 600, RF, ASTM A105, ASME B16.5. CLASE 600, RF SW, ASTM A105, ASME B16.5. TUBERÍA ( 3 y 4 ) BRIDAS ACCESORIOS ( 4 ) CIEGOS ASTM A860 Gr. WPHY65 (sin costura), ASME B16.9, espesor de pared ig al al del t boASTM A234 WPB (SMLS), ASME B16.9, espesor de pared igual al del tubo. ASTM A860 Gr. WPHY65 (welded seam), ASME B16.9, espesor de pared igual al del CLASE 6000, SW, A105, ASME B16.11( 5 ) @ CLASE 600, RF, ASTM A694 Gr. F65, ASME B16.47 Serie A. CLASE 600, RF WN, A694 Gr. F65, ASME B16.47 Serie A, agujero igual al del tubo. 48 CLASS 600, RF WN, A694 Gr. F65, ASME B16.47 Serie A, agujero igual al del tubo. API 5L Gr. B, SMLS. API 5L Gr. 65, SMLS. CLASE 600, RF SW, ASTM A105, ASME B16.5. CLASE 600, RF WN, ASTM A694 Gr. F65 , ASME B16.5, agujero igual al del tubo. STD WT. 0,469" 0,562"SCH. 160 XS WT. 0,406" 0,437" 3624 CORROSIÓN PERMISIBLE (Pulg.) DISEÑOSERVICIO:NORMA DISEÑO 1-1/2 14 4223/4 1 83 4 3018 B31.8 1210 16 206 DN (Pulgadas) TAG ELEMENTOS TEMP. ºF TEMP. ºF -20 A 100 °F -20 A 100 °F13800,125 AC3A31 PRUEBA HIDROSTATICA ( 2 )OPERACIÓN ( 1 ) Transporte de Gas 1480 MAWP (PSIG)600 PRESIÓN (PSIG) MAOP (PSIG) 1850 -20 A 100 °F TEMP. ºF CLASE ANSI PROHIBIDOS, Usar brida ciega para reemplazar tapón. NO APLICA SWAGES (BOTELLAS) PROHIBIDAS para esta clase. NO APLICA NO APLICAASTM A234, MSS SP-95, extremos según tubos a soldar (PBE ó BE x PE). CLASE 6000, SW, ASTM A105, ASME B16.11 NO APLICACOUPLINGS (ACOPLES) TAPONES y BUSHINGS COUPLINGS REDUCTORES NO APLICACLASE 6000, SW, ASTM A105, MSS SP-79 UNIONES WELDOLET, ASTM A860 Gr. WPHY65 , MSS SP-97, extremos de acuerdo a espesores de Cabezal y ramal. CLASE 600, ASTM A515 Gr. 70, diseño por ASME B16.47 Serie A y ASME B31.3 EMPAQUES CLASE 600, 1/8" ESPIROMETÁLICA, Anillo interno y externo 304 SS, Relleno de Grafito, ASME B16.20, para brida ASME B16.47 Serie A CLASE 600, 1/8" ESPIROMETÁLICA, Anillo interno y externo 304 SS, Relleno de Grafito, ASME B16.20, para brida ASME B16.5. ACCESORIOS NO APLICANIPLES ESPARRAGOS / TUERCAS ASTM A106 Gr. B, SCH. 160, PBE. espesor de pared igual al del tubo. Espárragos ASTM A193 Gr. B7, con par de tuercas pesadas de cabeza hexagonal ASTM A194 Gr. 2H ASTM A234 WPB (SMLS), ASME B16.9, espesor de pared igual al del tubo. ASME B16.9, espesor de pared igual al del tubo. CLASE 6000, SW, A105, ASME B16.11 CLASE 6000, Sockolet, A105, MSS SP-97, extremos de acuerdo a espesores de Cabezal y ramal. ESPACIADORES (BLANKS) O´LETS CLASE 600, ASTM A515 Gr. 70, ASME B16.48. ECP-VST-G-GEN-FT-001 729/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO Elaborado Versión: TAG CLASE @ @ @CORROSIÓN PERMISIBLE (Pulg.) DISEÑOSERVICIO:NORMA DISEÑO B31.8 TEMP. ºF TEMP. ºF -20 A 100 °F -20 A 100 °F13800,125 AC3A31 PRUEBA HIDROSTATICA ( 2 )OPERACIÓN ( 1 ) Transporte de Gas 1480 MAWP (PSIG)600 PRESIÓN (PSIG) CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 MAOP (PSIG) 1850 -20 A 100 °F TEMP. ºF CLASE ANSI BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" S S S S W W W W W W W W W R R R R R R R T NOTAS: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T Completar por Instrumentación. Completar por Instrumentación. S E L L O DIAMETRO CONEXIÓN 1 Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto CW03A0B2 CK03A0I2 BA12F0I1J BA03A0F2J ESPECIAL GL03A0B2 CK03A0B2 / CK03A0B2L BLOQUEO BA03A0I2H NE15H0I NO APLICA BA12K5I2H BA03A0I2J GA04F0I1J CW03A0I2 V Á L V U L A S ( 6 ) GA03A0I2J CK04F0I2 GL04F0I2 GA03A0B2J / GA03A0B2L GL03A0I2 RETENCIÓN ALIVIO BA03A0F2H NO APLICA 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T W = WELDOLET T = TEE NOMENCLATURA 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. D I A M E T R O C A B E Z A L 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Diseño, Instalación y Pruebas del código B31.8. S = SOCKOLET 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 826 "Inspección de Soldadura" de ASME B31.8-2007. 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, E (factor de junta): 1, y T (factor por temperatura): 1; para cualquier otro caso estos espesores deberán ser re-calculados de acuerdo a ASME B31.8 y según la clase de locación (Location Class), aparte de las consideraciones por temperatura del metal y método de fabricación del tubo. 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados están prohibidos para esta clase . Para la interfase Tubería / Instrumentación las válvulas serán del tipo monobrida (Brida x NPT), la brida conectará el lado de proceso y la rosca NPT hembra el lado del instrumento; para el caso de Temocouplas también se debe usar un arreglo bridado. Todas las conexiones deben usar Kit de Aislamiento y las válvulas deben ser tipo DB&P construidas tanto el cuerpo como los internos en material 316SS. ECP-VST-G-GEN-FT-001 730/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 TAG @ @ DN (pulg) TAG 1/2" - 1 1/2" BA12F0I1J 2" - 10" BA03A0I2J 12" - 30" BA03A0F2J 1/2" - 1 1/2" GA04F0I1J 2" - 10" GA03A0I2J 12" - 30" GA03A0B2J B O L A 0,125 TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN AC3A31 600 OPERACIÓN ( 1 ) TEMP. ºFMAX. PRESIÓN (PSIG) 1380 1480 100 ANSI CLASE DISEÑO TEMP. ºF CÓDIGO DE DISEÑO SERVICIO: CORROSION PERMITIDA (Inch) Válvula de compuerta, Clase 600# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598. -20 A 100 °F Válvula de bola, Clase 600# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Transporte de GasB31.8 PRESIÓN(PSIG) Válvula de bola, Clase 2500#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 80 de 6" de longitud. Código de diseño API 6D, probada según API 598. Válvula de bola, Clase 600# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. M P U E R T A Válvula de compuerta, Clase 800#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 600# RF extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. 12" - 30" GA03A0B2L 1/2" - 1 1/2" GL04F0I2 2" - 10" GL03A0I2 12" - 30" GL03A0B2 1/2" - 1 1/2" CK04F0I2 2" - 4" CK03A0I2 6" - 24" CK03A0B2 6" - 24" CK03A0B2L 2" - 4" CW03A0I2 6" - 24" CW03A0B2 A G U J A 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA03A0I2H Válvula de compuerta, Clase 600# RF extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. G L O B O R E T E N C I Ó N C O M Válvula de retención, Clase 600# RF, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 600# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 800#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de globo, Clase 800#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, probada según API 598. acuerdo a API 598. Válvula de globo, Clase 600# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de globo, Clase 600# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A en tamaños mayores a 24". Design code ASME B16.34, probada de acuerdo a API 598. D O B L E L O Q U E O P U R G A Válvula de Doble Bloqueo & Purga Clase 600# RF extremos bridados con paso completo bola montada sobre muñones acceso lateral bonete apernado asiento y bola reemplazables no lubricados cuerpo y bonete en acero al carbono fundido ASTM A216 Gr WCB bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada Válvula de retención, Clase 600# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de aguja, 6000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula de retención, Clase 600# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula integral monobrida, 2500# RFxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. Válvula de Doble Bloqueo & Purga, Clase 600# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. Válvula de retención, Clase 600# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. 12" - 30" BA03A0F2HD B L O & P Válvula de Doble Bloqueo & Purga, Clase 600# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. ECP-VST-G-GEN-FT-001 731/761 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES PIPING MATERIAL SPECIFICATION TAG CLASS @ @ 1/2 -20 A 100 °F@ CLASS 600, RF WN, A694 Gr. F65, ASME B16.47 Series A, bore to match pipe. 18 206 0,562" 24 CLASS 600, RF WN, ASTM A694 Gr. F65 , ASME B16.36, bore to match pipe. CLASS 600, RF WN, A694 Gr. F65, ASME B16.47 Series A, bore to match pipe. 4 CLASS 600, RF WN, ASTM A105, ASME B16.5, bore to match pipe. B31.4 DESIGN CODE 1 0,75" 0,812" API 5L Gr. 65, ERW/DSAW NOT APPLY 42 483/4 CLASS 600, RF WN, ASTM A105, ASME B16.5, bore to match pipe. CORROSION ALLOWANCE (Inch) PRESSURE (PSIG) Líquids Transportation MAOP (PSIG) DN (Inches) TAG ELEMENTS 2 MAWP (PSIG) OPERATION ( 1 ) 0,938" -20 A 100 °F 0,406" 0,437" 0,469"SCH. 160 AC3A32 TEMP. ºF DESIGN TEMP. ºF CLASS 600, RF WN, ASTM A694 Gr. F65 , ASME B16.5, bore to match pipe. SERVICE: 0,125 ANSI CLASS 600 -20 A 100 °F HIDROSTATIC TEST ( 2 ) TEMP. ºF 1380 1480 FLANGES CLASS 600, RF SW, ASTM A105, ASME B16.5. 1850 ORIFICE FLANGES 1-1/2 14 36 0,625" 16 ASTM A234 WPB (SMLS) ASME B16 9 wall thicknes to match pipe 8 3010 XS WT. STD WT. 123 CLASS 600, RF SW, ASTM A105, ASME B16.5. PIPING ( 3 y 4 ) CLASS 600, RF, ASTM A105, ASME B16.5. ASTM A106 Gr. B, PBE. API 5L Gr. B, SMLS. API 5L Gr. 65, SMLS. CLASS 600, RF, ASTM A694 Gr. F65, ASME B16.47 Series A.CLASS 600, RF, ASTM A694 Gr. F65 , ASME B16.5. ASTM A860 Gr. WPHY65 (seamless), ASME B16.9, wall ASTM A860 Gr. WPHY65 (welded seam), FITTINGS ( 4 ) CLASS 6000 SW A105 ASME B16 11( 5 ) BLINDS CLASS 600, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.5.GASKETS BLANKS O´LETS ASTM A234 WPB (SMLS), ASME B16.9, wall thicknes to match pipe. Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2HSTUD BOLTS / NUTS NOT APPLY CLASS 300, 1/8" ESPIROMETALIC, Inner & Outer Ring 304 SS, Grafhite Filler, ASME B16.20, for flange ASME B16.47 Series A. CLASS 600, ASTM A515 Gr. 70, ASME B16.48. NOT APPLY CLASS 600, ASTM A515 Gr. 70, design to ASME B16.47 Series A & ASME B31.3 ASTM A860 Gr. WPHY65 (seamless), ASME B16.9, wall thicknes to match pipe. ASTM A860 Gr. WPHY65 (welded seam), ASME B16.9, wall thicknes to match pipe. WELDOLET, ASTM A860 Gr. WPHY65 , MSS SP-97, Ends to match Head and Branch Piping. CLASS 6000, Sockolet, A105, MSS SP-97, ends to match Head and Branch Piping. FITTINGS ( 4 ) PROHIBITED for this class. NIPPLES CLASS 6000, SW, A105, ASME B16.11( 5 ) SWAGES REDUCER COUPLINGS NOT APPLY NOT APPLY NOT APPLYASTM A234, MSS SP-95, Ends to match pipes (PBE ó BE x PE). UNIONS ASTM A106 Gr. B, SCH. 160, PBE. PROHIBITED, to use blind instead plug. CLASE 6000, SW, ASTM A105, ASME B16.11 NOT APPLY CLASE 6000, SW, ASTM A105, MSS SP-79 COUPLINGS PLUGS & BUSHINGS ECP-VST-G-GEN-FT-001 732/761 CODIGO Elaborado Versión: VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES PIPING MATERIAL SPECIFICATION TAG CLASS @ @ CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 -20 A 100 °F@ B31.4 DESIGN CODE CORROSION ALLOWANCE (Inch) PRESSURE (PSIG) Líquids Transportation MAOP (PSIG) MAWP (PSIG) OPERATION ( 1 ) -20 A 100 °F AC3A32 TEMP. ºF DESIGN TEMP. ºF SERVICE: 0,125 ANSI CLASS 600 -20 A 100 °F HIDROSTATIC TEST ( 2 ) TEMP. ºF 1380 1480 1850 BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T CK04F0I2 CW03A0B2 CK03A0B2 / CK03A0B2L NO APLICA GL03A0I2 GL04F0I2 V Á L V E S ( 6 ) CHECK CK03A0I2 BRANCH BLOCK CW03A0I2 BA12K5I2H S E A L S NO APLICA BA03A0F2HBA03A0I2H Instrumentation must complete this description. NE15H0I Instrumentation must complete this description. GL03A0B2 GA04F0I1J GA03A0I2J GA03A0B2J / GA03A0B2L 1 Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project BA03A0I2J BA12F0I1J BA03A0F2J RELIEF SPECIAL 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. S = SOCKOLET H E A D W = WELDOLET T = TEE 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 434.8.5 "Required Inspection and Acceptance Criteria" ASME B31.4-2006. NOMENCLATURA 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings are prohibited for this class. For the interface mechanical / Instrumentation valves shalll be monoflnage type (flange x NPT), flange to connect process side and thread FNPT for instrument side; likewise for Temocouplas arrange shall be flanged. All conecctions shall use insulation Kits and valves shall be DB&B type, 316SS body and trim. 3. Wall thickness showed up correspond to F (design factor) : 0,72, and E (joint factor) : 1; in any other case, wall thickness must be calculated according to ASME B31.4 and pertinent design factor F, which could be lower than 0.72 (ASME B31.4-2006, 402.3.1 (h)) depending on special service conditions or location, but never will be upper than this value (ASME B31.4-2006, 402.3.1 (a)). 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Inspection and Testing" from ASME B31.4. ECP-VST-G-GEN-FT-001 733/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 TAG CLASS @ @ DN (pulg) TAG 1/2" - 1 1/2" BA12F0I1J 2" - 10" BA03A0I2J 12" - 30" BA03A0F2J 1/2" - 1 1/2" GA04F0I1J 2" - 10" GA03A0I2J 12" - 30" GA03A0B2J Ball Valve, Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24". Design code API 6D. Ball Valve, Class 2500#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. B A L L VALVE TYPE Gate Valve, Class 800#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 600# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24". Design code API 6D, testing according to API 598. Gate Valve, Class 600# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. G A T E Ball Valve, Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Devlon Seats, Lever Operator. Design code API 6D. VALVES SPECIFICATIONS ( 6 ) DESCRIPTION B31.4 -20 A 100 °F 100AC3A32 600 OPERATION ( 1 ) TEMP. ºF 1380 DESING CODE SERVICE: TEMP. ºF 1480 PRESSURE. (PSIG) MAX. PRESIÓN (PSIG) CORROSION ALLOWANCE (Inch) ANSI CLASS DESIGN 0,125 Transporte de Hidrocarburos Líquidos 12" - 30" GA03A0B2L 1/2" - 1 1/2" GL04F0I2 2" - 10" GL03A0I2 12" - 30" GL03A0B2 1/2" - 1 1/2" CK04F0I2 2" - 4" CK03A0I2 6" - 24" CK03A0B2 6" - 24" CK03A0B2L 2" - 4" CW03A0I2 6" - 24" CW03A0B2 N E E D L E 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA03A0I2H D bl Bl k d Bl d B ll V l Cl 600# R i d F Fl d E d ith F ll P t (U l th i t d) T i t d b ll Sid E t B lt d B t N L b i t d R l bl B ll A d S t C t C b St l ASTM A216 G WCB B d A d B t CS + ENP (3 il t ASTM B733) B ll Fi S f Check Valve, Class 600# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Double Block and Bleed Ball Valve , Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Devlon Seats, Lever Operator.Design code API 6D. O U B L E L O C K & B L E E D Check Valve, Class 600#, FULL-OPENING, Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 600# Raised-Face Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. C H E C K Check Valve, Class 800#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Neddle valve, 6000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Integral Monoflange Valve, 2500# RFxNPT, Double Block & Bleed Valve, Needle Blocks and Vent, Flanged (process) x Threaded connections; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. G L O B E Check Valve, Class 600# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Globe Valve, Class 600# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24" Design code ASME B16.34, testing according to API 598. Globe Valve, Class 600# Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. Globe Valve, Class 800#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. Check Valve, Class 600# Raised-Face Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Gate Valve, Class 600#, THRU CONDUIT, Raised-Face Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24". Design code API 6D, testing according to API 598. Design code API 6D, testing according to API 598. 12" - 30" BA03A0F2H Double Block and Bleed Ball Valve, Class 600# Raised-Face Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Devlon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. D O B L B ECP-VST-G-GEN-FT-001 734/761 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES TAG CLASE @ @ 1/2 CLASE 600, RF WN, ASTM A105, ASME B16.5, agujero igual al del tubo. CLASE 600, RF WN, ASTM A694 Gr. F65 , ASME B16.36, agujero igual al del tubo. ACCESORIOS ( 4 ) ASTM A860 Gr. WPHY65 (welded seam), ASME B16.9, espesor de pared igual al del 42 482 3620 API 5L Gr. 65, ERW/DSAW 0,625" CLASE 600, RF WN, A694 Gr. F65, ASME B16.47 Serie A, agujero igual al del tubo. CLASE 600, RF, ASTM A694 Gr. F65, ASME B16.47 Serie A. CLASS 600, RF WN, A694 Gr. F65, ASME B16.47 Serie A, agujero igual al del tubo. CLASE 600, RF, ASTM A694 Gr. F65 , ASME B16.5. ASTM A234 WPB (SMLS), ASME B16.9, espesor de pared igual al del tubo. ASTM A860 Gr. WPHY65 (sin costura), ASME B16.9, espesor de pared igual al del tubo CLASE 600, RF WN, ASTM A105, ASME B16.5, agujero igual al del tubo. 0,437" 0,812" 600AC3A32 OPERACIÓN ( 1 ) TEMP. ºF 4 14 1480 MAOP (PSIG) DN (Pulgadas) TAG ELEMENTOS TEMP. ºF 8 30 BRIDAS CLASE 600, RF SW, ASTM A105, ASME B16.5. CIEGOS NO APLICA CLASE 6000, SW, A105, ASME B16.11( 5 ) BRIDAS DE ORIFICIO CLASS 600, RF, ASTM A105, ASME B16.5. CLASE 600, RF WN, ASTM A694 Gr. F65 , ASME B16.5, agujero igual al del tubo. CLASE 600, RF SW, ASTM A105, ASME B16.5. ASTM A106 Gr. B, PBE. -20 A 100 °F 1380 6 16 181 24 -20 A 100 °F 1850 Transporte de Hidrocarburos Líquidos API 5L Gr. B, SMLS. API 5L Gr. 65, SMLS. 0,562" TEMP. ºF 1-1/2 XS WT. STD WT. 0,406" CLASE ANSI 0,938" 0,125CORROSIÓN PERMISIBLE (Pulg.) 3/4 123 SERVICIO: B31.4 NORMA DISEÑO PRESIÓN (PSIG) PRUEBA HIDROSTATICA ( 2 ) MAWP (PSIG) DISEÑO @ -20 A 100 °F 10 0,75"0,469"SCH. 160 TUBERÍA ( 3 y 4 ) COUPLINGS REDUCTORES NO APLICACLASE 6000, SW, ASTM A105, MSS SP-79 PROHIBIDOS, Usar brida ciega para reemplazar tapón. NO APLICATAPONES y BUSHINGS UNIONES NO APLICAASTM A234, MSS SP-95, extremos según tubos a soldar (PBE ó BE x PE). ESPARRAGOS / TUERCAS Espárragos ASTM A193 Gr. B7, con par de tuercas pesadas de cabeza hexagonal ASTM A194 Gr. 2H EMPAQUES CLASE 6000, SW, ASTM A105, ASME B16.11 NO APLICA SWAGES (BOTELLAS) PROHIBIDAS para esta clase. NO APLICA COUPLINGS (ACOPLES) ASTM A106 Gr. B, SCH. 160, PBE. NO APLICA CLASE 600, 1/8" ESPIROMETÁLICA, Anillo interno y externo 304 SS, Relleno de Grafito, ASME B16.20, para brida ASME B16.5. NIPLES CLASE 600, 1/8" ESPIROMETÁLICA, Anillo interno y externo 304 SS, Relleno de Grafito, ASME B16.20, para brida ASME B16.47 Serie A p p g tubo. ( ) p p g espesor de pared igual al del tubo., , , CLASE 6000, Sockolet, A105, MSS SP-97, extremos de acuerdo a espesores de Cabezal y ramal. ESPACIADORES (BLANKS) O´LETS CLASE 600, ASTM A515 Gr. 70, ASME B16.48. WELDOLET, ASTM A860 Gr. WPHY65 , MSS SP-97, extremos de acuerdo a espesores de Cabezal y ramal. CLASE 600, ASTM A515 Gr. 70, diseño por ASME B16.47 Serie A y ASME B31.3 ECP-VST-G-GEN-FT-001 735/761 CODIGO Elaborado Versión PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES TAG CLASE @ @ 600AC3A32 OPERACIÓN ( 1 ) TEMP. ºF1480 MAOP (PSIG) TEMP. ºF -20 A 100 °F 1380 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 -20 A 100 °F 1850 Transporte de Hidrocarburos Líquidos TEMP. ºF CLASE ANSI 0,125CORROSIÓN PERMISIBLE (Pulg.) SERVICIO: B31.4 NORMA DISEÑO PRESIÓN (PSIG) PRUEBA HIDROSTATICA ( 2 ) MAWP (PSIG) DISEÑO @ -20 A 100 °F BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" S S S S W W W W W W W W W R R R R R R R T NOTAS: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T Completar por Instrumentación. Completar por Instrumentación. S E L L O DIAMETRO CONEXIÓN V Á L V U L A S ( 6 ) RETENCIÓN ALIVIO CW03A0B2 ESPECIAL BA03A0I2J BA12F0I1J BA03A0F2J BA03A0F2HBA03A0I2H NE15H0I NO APLICA BA12K5I2H NO APLICA CK04F0I2 GL04F0I2 GA04F0I1J CW03A0I2 GL03A0B2 CK03A0B2 / CK03A0B2L BLOQUEO GA03A0I2J GA03A0B2J / GA03A0B2L GL03A0I2 CK03A0I2 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. D I A M E T R O C A B E Z A L NOMENCLATURA 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados deben ser usados sólo para servicio de agua y aire para instrumentación . Para la interfase Mecánica / Instrumentación las válvulas serán roscadas al accesorio de conexión requerido. S = SOCKOLET 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 434.8.5 "Inspección Requerida y Criterios de Aceptación de Soldadura" de ASME B31.4-2006. 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, y E (factor de junta): 1; para cualquier otro caso estos espesores de pared deberán ser calculados de acuerdo a ASME B31.4 y según el factor de diseño F que en caso de consideraciones especiales de servicio o de Localidad (Location) podría ser menor a 0.72 (ASME B31.4-2006, 402.3.1 (h)) , pero en ningún caso podrá ser superior a este valor (ASME B31 4-2006 402 3 1 (a)) W = WELDOLET T = TEE 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Inspección y Pruebas del código B31.4. ECP-VST-G-GEN-FT-001 736/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 TAG @ @ DN (pulg) TAG 1/2" - 1 1/2" BA12F0I1J 2" - 10" BA03A0I2J 12" - 30" BA03A0F2J 1/2" - 1 1/2" GA04F0I1J 2" - 10" GA03A0I2J 12" - 30" GA03A0B2J B O L A 0,125 TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN Válvula de bola, Clase 2500#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 80 de 6" de longitud. Código de diseño API 6D, probada según API 598. Válvula de bola, Clase 600# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. AC3A32 600 B31.4 Válvula de bola, Clase 600# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. TEMP. ºFTransporte de Hidrocarburos Líquidos MAX. PRESIÓN (PSIG) CORROSION PERMITIDA (Inch) OPERACIÓN ( 1 ) 1380 SERVICIO: 1480 PRESIÓN(PSIG) -20 A 100 °F ANSI CLASE DISEÑO 100 TEMP. ºF CÓDIGO DE DISEÑO M P U E R T A Válvula de compuerta, Clase 800#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 600# RF extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. Válvula de compuerta, Clase 600# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598 12" - 30" GA03A0B2L 1/2" - 1 1/2" GL04F0I2 2" - 10" GL03A0I2 12" - 30" GL03A0B2 1/2" - 1 1/2" CK04F0I2 2" - 4" CK03A0I2 6" - 24" CK03A0B2 6" - 24" CK03A0B2L 2" - 4" CW03A0I2 6" - 24" CW03A0B2 A G U J A 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA12K5I2H 2" - 10" BA03A0I2H G L O B O R E T E N C I Ó N C O M Válvula de retención, Clase 600# RF, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 600# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 800#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de globo, Clase 800#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, encima de 24 . Código de diseño API 6D, pruebas de acuerdo a API 598. Válvula de globo, Clase 600# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A en tamaños mayores a 24". Design code ASME B16.34, probada de acuerdo a API 598. Válvula de globo, Clase 600# RF, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de compuerta, Clase 600# RF extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. D O B L E O Q U E O & U R G A Vál l d D bl Bl & P Cl 600# RF t b id d l t b l t d b ñ l t l b t d i t b l l bl l b i d b t l b f did ASTM A216 G WCB b l l b bi t di d Válvula de retención, Clase 600# RF, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de aguja, 6000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula de retención, Clase 600# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula integral monobrida, 2500# RFxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. Válvula de Doble Bloqueo & Purga, Clase 600# RF extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Devlon, operada por palanca. Código de diseño API 6D. Válvula de retención, Clase 600# RF, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. 12" - 30" BA03A0F2HD O B L O P U Válvula de Doble Bloqueo & Purga, Clase 600# RF extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Devlon, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. ECP-VST-G-GEN-FT-001 737/761 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 TAG CLASS @ @ 1/2 CLASS 1500, RTJ, ASTM A105, ASME B16.5 CLASS 900, RTJ, ASTM A694 Gr. F70, ASME B16.47 Series A.CLASS 900, RTJ, ASTM A694 Gr. F70 , ASME B16.5. 0,812" CLASS 900, RTJ WN, A694 Gr. F70, ASME B16.47 Series A, wall thickness to match pipe. SCH. 40 FLANGES ( 5 )( 4 ) BLINDS PIPING ( 3 y 4 ) CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 CLASS 1500, RTJ WN, ASTM A694 Gr. 70, B16.5 XS WT. STD. WT. ASTM A160, PBE. API 5L Gr. 70 SMLS. NOT APPLYORIFICE FLANGES CLASS 900, RTJ WN, ASTM A694 Gr. F70 , ASME B16.36, wall thicknes to match pipe. 0,938" ASTM A860 Gr WPHY70 (con costura) 1,062"SCH. 160. CLASS 900, RTJ WN, A694 Gr. F70, ASME B16.47 Series A, wall thickness to match pipe. CLASS 900, RTJ WN, ASTM A694 Gr. F70 , ASME B16.5, wall thicknes to match pipe. 2120 -20 A 100 °F 4 4836 API 5L Gr. 70 ERW/DSAW 1,188" 3/4 2420 30 CLASS 1500, RTJ WN, ASTM A694 Gr. 70, B16.5 DESIGN CODE AC4B31 900 ANSI CLASS DESIGN TEMP. ºF -20 A 100 °F 0,125 HIDROSTATIC TEST ( 2 ) @ MAWP (PSIG) -20 A 100 °F 2220 2775 TEMP. ºF OPERATION ( 1 ) CORROSION ALLOWANCE (Inch) SERVICE: B31.8 Gas Transmission PRESSURE (PSIG) TEMP. ºF 4262 DN (Inches) TAG ELEMENTS 12 183 8 14 161-1/21 10 MAOP (PSIG) SWAGES CLASS 6000, SW, ASTM A105, MSS SP-79 UNIONS PROHIBITED for this class. GASKETS NIPPLES Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2H CLASS 900, OVAL RING TYPE R, Soft Iron, 90 BHN max., flange ASME B16.5. ASTM A860 Gr. WPHY70, MSS SP-95, Ends to match pipes (PBE ó BE x PE). COUPLINGS NOT APPLY NOT APPLY PLUGS & BUSHINGS NOT APPLYREDUCER COUPLINGS CLASS 6000, SW, ASTM A105, ASME B16.11 PROHIBITED, to use blind instead plug. NOT APPLY ASTM A160, SCH. 160, PBE. NOT APPLY NOT APPLY STUD BOLTS / NUTS WELDOLET, ASTM A860 Gr. WPHY70 , MSS SP-97, Ends to match Head and Branch Piping. CLASS 900, ASTM A515 Gr. 70, design to ASME B16.47 Series A y ASME B31.3 ASTM A860 Gr. WPHY70 (SMLS), ASME B16.9, wall thicknes to match pipe. CLASS 900, ASTM A515 Gr. 70, ASME B16.48.CLASS 1500, ASTM A515 Gr. 70, ASME B16.48. CLASS 900, OVAL RING TIPO R, Soft Iron, 90 BHN max.,flange ASME B16.47 Serie A. CLASS 1500, OVAL RING TYPE R, Soft Iron, 90 BHN max., flange ASME B16.5 BLANKS O´LETS CLASS 6000, SW, A105, ASME B16.11( 5 )FITTINGS ( 4 ) CLASS 6000, Sockolet, A105, MSS SP-97 ASTM A860 Gr. WPHY70 (con costura), ASME B16.9, wall thickness to match pipe. ECP-VST-G-GEN-FT-001 738/761 CODIGO Elaborado PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: TAG CLASS @ @ CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 2120 -20 A 100 °F DESIGN CODE AC4B31 900 ANSI CLASS DESIGN TEMP. ºF -20 A 100 °F 0,125 HIDROSTATIC TEST ( 2 ) @ MAWP (PSIG) -20 A 100 °F 2220 2775 TEMP. ºF OPERATION ( 1 ) CORROSION ALLOWANCE (Inch) SERVICE: B31.8 Gas Transmission Versión: 1 PRESSURE (PSIG) TEMP. ºF MAOP (PSIG) BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30 S S S S V Á L V E S ( 6 ) BA05A0I2H GL06A0I2 GL05A0I2 CK05A0B2 / CK05A0B2L GA05A0I2J CHECK BA05A0F2JBA05A0I2J GL05A0B2 GA06A0I2JGA06F0I1J BA14F0I1J BA06A0I2J CW05A0B2 GA05A0B2J / GA05A0B2L BA05A0F2H SPECIAL CK06A0I2 CK05A0I2 CW05A0I2 CK06F0I2 NO APLICA GL06F0I2 CW06A0I2 Instrumentation must complete this description. BA06A0I2H NE15H0I BA14K5I2H RELIEF NO APLICA Instrumentation must complete this description. S E A L S BRANCH 1 O ti C diti t b fit t P ti l "B d C it i f D i " P j t BLOCK 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T NOMENCLATURA 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings are prohibited for this class. For the interface mechanical / Instrumentation valves shalll be monoflange type (flange x NPT), flange to connect process side and thread FNPT for instrument side; likewise for Temocouplas arrange shall be flanged. All conecctions shall use insulation Kits and valves shall be DB&B type 316SS body and trim 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. H E A D 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Design, Installation and Test" from ASME B31.8. 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 826 " Inspection of Welds" ASME B31.8 -2007. 3. Wall thickness showed up correspond to F (design factor) : 0,72, E (joint factor) : 1, and T ( temperature factor): 1; in any other case, wall thickness must be re-calculated to ASME B31.8 and according to "Location class", besides consideration of metal temperature and pipe manufacturing. W = WELDOLET S = SOCKOLET T = TEE ECP-VST-G-GEN-FT-001 739/761 TAG CLASS @ @ PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 ANSI CLASS OPERATION ( 1 ) TEMP. ºF 2120 DESING CODE SERVICE: DESIGN 2220AC4B31 0,125 B31.8 -20 A 100 °F TEMP. ºF MAX. PRESIÓN (PSIG)Gas Transmission900 PRESSURE. (PSIG) CORROSION ALLOWANCE (Inch) 100 DN (pulg) TAG 1/2" - 1 1/2" BA14F0I1J 2" BA06A0I2J 3" - 10" BA05A0I2J 12" - 30" BA05A0F2J 1/2" - 1 1/2" GA06F0I1J 2" GA06A0I2J 3" - 10" GA05A0I2J 12" - 30" GA05A0B2J 12" - 30" GA05A0B2L B A L L Ball Valve, Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Floating Ball , Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607, Reinforced Nylon Seats, Lever Operator. Design code API 6D. VALVE TYPE VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 900# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Reinforced Nylon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. Ball Valve, Class 5000#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. Ball Valve, Class 900# RTJ Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Gate Valve, Class 1500#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. Gate Valve, Class 900# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. G A T E Gate Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. Gate Valve, Class 900#, THRU CONDUIT, RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24" Design code API 6D testing according to API 598 Gate Valve, Class 900# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. 1/2" - 1 1/2" GL06F0I2 2" GL06A0I2 3" - 10" GL05A0I2 12" - 30" GL05A0B2 1/2" - 1 1/2" CK06F0I2 2" CK06A0I2 3" - 4" CK05A0I2 6" - 24" CK05A0B2 6" - 24" CK05A0B2L 2" CW06A0I2 3" - 4" CW05A0I2 6" - 24" CW05A0B2 N E E D L E 1/2" - 1 1/2" NE15H0I Check Valve, Class 900#, FULL-OPENING, RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Globe Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602, testing according to API 598. Globe Valve, Class 900# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24" Design code ASME B16.34, testing according to API 598. C H E C K Check Valve, Class 900# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. G L O B E Globe Valve, Class 1500#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Globe Valve, Class 900# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. larger than 24". Design code API 6D, testing according to API 598. Check Valve, Class 1500#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 900# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 900# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 900# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 594, testing according to API 598. & f # ( ) & SS & S & S f Neddle valve, 6000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. 1/2" - 1 1/2" BA14K5I2H 2" BA06A0I2H 3" - 10" BA05A0I2H 12" - 30" BA05A0F2H D O U B L E B L O C K & B L E E D Double Block and Bleed Ball Valve , Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Double Block and Bleed Ball Valve , Class 900# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Double Block and Bleed Ball Valve, Class 900# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Reinforced Nylon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24". Design code API 6D. Integral Monoflange Valve, 5000# RTJxNPT, Flanged (process) x Threaded connections, Double Block & Bleed Valve, Needle Blocks and Vent; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. ECP-VST-G-GEN-FT-001 740/761 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES PIPING MATERIAL SPECIFICATION TAG CLASE @ @ 1/2 NORMA DISEÑOCLASE ANSI -20 A 100 °FTransporte de Gas -20 A 100 °F AC4B31 2775 900 OPERACIÓN ( 1 ) -20 A 100 °F0,125 PRUEBA HIDROSTATICA ( 2 ) B31.8 CORROSIÓN PERMISIBLE (Pulg.) PRESIÓN (PSIG) DISEÑOSERVICIO: 3024 API 5L Gr. 70 ERW/DSAW 1,188" 4 CLASE 900, RTJ WN, A694 Gr. F70, ASME B16.47 Serie A, agujero igual al del tubo. 1-1/2 8 TEMP. ºF 36162 6 4218 48 MAOP (PSIG) @ MAWP (PSIG)TEMP. ºF 2120 TEMP. ºF2220 0,812" 0,938" 1,062" CLASS 900, RTJ WN, A694 Gr. F70, ASME B16.47 Serie A, agujero igual al del tubo. CLASE 1500, RTJ WN, ASTM A694 Gr. 70, B16.5 CLASE 1500, RTJ SW, ASTM A105, ASME B16.5 SCH. 40 CLASE 1500, RTJ SW, ASTM A105, ASME B16.5 CLASE 1500, RTJ WN, ASTM A694 Gr. 70, B16.5 CLASE 1500, RTJ, ASTM A105, ASME B16.5 CLASE 900, RTJ, ASTM A694 Gr. F70 , ASME B16.5. NO APLICA ASTM A860 Gr. WPHY70 (con costura), CLASE 900, RTJ, ASTM A694 Gr. F70, ASME B16.47 Serie A. CLASE 900, RTJ WN, ASTM A694 Gr. F70 , ASME B16.5, agujero igual al del tubo. CLASE 900, RTJ WN, ASTM A694 Gr. F70 , ASME B16.36, agujero igual al del tubo. 12 2014 CIEGOS 3 SCH. 160. TUBERÍA ( 3 y 4 ) BRIDAS DE ORIFICIO STD. WT.XS WT. 3/4 DN (Pulgadas) TAG ELEMENTOS 1 10 BRIDAS ASTM A160, PBE. API 5L Gr. 70 SMLS. EMPAQUES CLASE 900, OVAL RING TIPO R, Soft Iron, 90 BHN max.,brida ASME B16.47 Serie A. WELDOLET, ASTM A860 Gr. WPHY70 , MSS SP-97, extremos de acuerdo a espesores de Cabezal y ramal. CLASE 900, ASTM A515 Gr. 70, diseño por ASME B16.47 Serie A y ASME B31.3 CLASE 6000, Sockolet, A105, MSS SP-97 CLASE 1500, OVAL RING TYPE R, Soft Iron, 90 BHN max., brida ASME B16.5 CLASE 900, OVAL RING TYPE R, Soft Iron, 90 BHN max., brida ASME B16.5. ESPACIADORES (BLANKS) O´LETS NO APLICA CLASE 900, ASTM A515 Gr. 70, ASME B16.48.CLASE 1500, ASTM A515 Gr. 70, ASME B16.48. ASTM A860 Gr. WPHY70 (SMLS), ASME B16.9, espesor de pared igual al del tubo. ( ) ASME B16.9, espesor de pared igual al del tubo. ACCESORIOS ( 4 ) CLASE 6000, SW, A105, ASME B16.11( 5 ) CLASE 6000, SW, ASTM A105, MSS SP-79 CLASE 6000, SW, ASTM A105, ASME B16.11 NO APLICAPROHIBIDAS para esta clase. PROHIBIDOS, Usar brida ciega para reemplazar tapón. NO APLICA Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2HESPARRAGOS / TUERCAS ASTM A160, SCH. 160, PBE. NO APLICA UNIONES NO APLICA NIPLES COUPLINGS (ACOPLES) TAPONES y BUSHINGS COUPLINGS REDUCTORES NO APLICAASTM A860 Gr. WPHY70, MSS SP-95, extremos y espesores según tubos a soldar (PBE ó BE x PE).SWAGES (BOTELLAS) ECP-VST-G-GEN-FT-001 741/761 CODIGO Elaborado Versión: VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES PIPING MATERIAL SPECIFICATION TAG CLASE @ @ CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 NORMA DISEÑOCLASE ANSI -20 A 100 °FTransporte de Gas -20 A 100 °F AC4B31 2775 900 OPERACIÓN ( 1 ) -20 A 100 °F0,125 PRUEBA HIDROSTATICA ( 2 ) B31.8 CORROSIÓN PERMISIBLE (Pulg.) PRESIÓN (PSIG) DISEÑOSERVICIO: TEMP. ºF MAOP (PSIG) @ MAWP (PSIG)TEMP. ºF 2120 TEMP. ºF2220 BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" S S S S W W W W W W W W W R R R R R R R T NOTAS: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T BA14F0I1J BA06A0I2J ESPECIAL BLOQUEO RETENCIÓN GL06F0I2 BA06A0I2H NO APLICA BA05A0F2J GL05A0B2 CK06A0I2 CK05A0I2 CK06F0I2 GL06A0I2 GL05A0I2 CK05A0B2 / CK05A0B2L CW05A0B2 BA05A0I2H GA06A0I2J GA05A0I2J GA05A0B2J / GA05A0B2LGA06F0I1J BA05A0I2J V Á L V U L A S ( 6 ) NE15H0I CW06A0I2 BA14K5I2H ALIVIO NO APLICA Completar por Instrumentación. CW05A0I2 DIAMETRO CONEXIÓN Completar por Instrumentación. S E L L O 1 Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto BA05A0F2H 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T NOMENCLATURA 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Diseño, Instalación y Pruebas del código B31.8. 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados están prohibidos para esta clase . Para la interfase Tubería / Instrumentación las válvulas serán del tipo monobrida (Brida x NPT), la brida conectará el lado de proceso y la rosca NPT hembra el lado del instrumento; para el caso de Temocouplas también se debe usar un arreglo bridado. Todas las conexiones deben usar Kit de Aislamiento y las válvulas deben ser tipo DB&P construidas tanto el cuerpo como los internos en material 316SS S = SOCKOLET 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. T = TEE D I A M E T R O C A B E Z A L W = WELDOLET 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 826 "Inspección de Soldadura" de ASME B31.8-2007. 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, E (factor de junta): 1, y T (factor por temperatura): 1; para cualquier otro caso estos espesores deberán ser re-calculados de acuerdo a ASME B31.8 y según la clase de locación (Location Class), aparte de las consideraciones por temperatura del metal y método de fabricación del tubo. ECP-VST-G-GEN-FT-001 742/761 TAG @ @ CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 MAX. PRESIÓN (PSIG) PIPING MATERIAL SPECIFICATION OPERACIÓN ( 1 ) 2220 PRESIÓN(PSIG) B31.8 DISEÑO VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES 900 2120 ANSI CLASE TEMP. ºF CÓDIGO DE DISEÑO SERVICIO: 100 TEMP. ºF AC4B31 Transporte de Gas -20 A 100 °FCORROSION PERMITIDA (Inch) 0,125 DN (pulg) TAG 1/2" - 1 1/2" BA14F0I1J 2" BA06A0I2J 3" - 10" BA05A0I2J 12" - 30" BA05A0F2J 1/2" - 1 1/2" GA06F0I1J 2" GA06A0I2J 3" - 10" GA05A0I2J 12" - 30" GA05A0B2J 12" - 30" GA05A0B2L Válvula de compuerta, Clase 1500#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 900# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598. Válvula de bola, Clase 900# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. C O M P U E R T A Válvula de compuerta, Clase 1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598 Válvula de compuerta, Clase 900# RTJ extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16 47 i A i d 24" Códi d di ñ API 6D b d d API 598 Válvula de compuerta, Clase 900# RTJ extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. Válvula de bola, Clase 900# RTJ extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Nylon reforzado, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula de bola, Clase 5000#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 80 de 6" de longitud. Código de diseño API 6D, probada según API 598. B O L A Válvula de bola, Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN TIPO 12 30 GA05A0B2L 1/2" - 1 1/2" GL06F0I2 2" GL06A0I2 3" - 10" GL05A0I2 12" - 30" GL05A0B2 1/2" - 1 1/2" CK06F0I2 2" CK06A0I2 3" - 4" CK05A0I2 6" - 24" CK05A0B2 6" - 24" CK05A0B2L 2" CW06A0I2 3" - 4" CW05A0I2 6" - 24" CW05A0B2 A G U J A 1/2" - 1 1/2" NE15H0I & Válvula de globo, Clase 900# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A en tamaños mayores a 24". Design code ASME B16.34, probada de acuerdo a API 598. Válvula de aguja, 6000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula de retención, Clase 900# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 900# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 900# RTJ, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API Válvula de retención, Clase 1500# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. G L O B O R E T E N C I Ó N Válvula de retención, Clase 900# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 900# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de globo, Clase 1500#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, Válvula de globo, Clase 900# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de globo, Clase 1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. 1/2" - 1 1/2" BA14K5I2H 2" BA06A0I2H 3" - 10" BA05A0I2H 12" - 30" BA05A0F2H D O B L E B L O Q U E O & P U R G A Válvula de Doble Bloqueo & Purga, Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. Válvula de Doble Bloqueo & Purga, Clase 900# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. Válvula de Doble Bloqueo & Purga, Clase 900# RTJ extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Nylon reforzado, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula integral monobrida, 5000# RTJxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. ECP-VST-G-GEN-FT-001 743/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 TAG CLASS @ @ 1/2 BLINDS CLASS 900, RTJ WN, A694 Gr. F70, ASME B16.47 Series A, wall thickness to match pipe. API 5L Gr. 70 ERW/DSAW NOT APPLY 1,188"SCH. 160. XS WT. STD. WT. SCH. 40 1,062"0,812" 0,938" CLASS 1500, RTJ, ASTM A105, ASME B16.5 CLASS 900, RTJ, ASTM A694 Gr. F70 , ASME B16.5. CLASS 900, RTJ, ASTM A694 Gr. F70, ASME B16.47 Series A. CLASS 900, RTJ WN, ASTM A694 Gr. F70 , ASME B16.5, wall thicknes to match pipe.CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 PIPING ( 3 y 4 ) CLASS 1500, RTJ WN, ASTM A694 Gr. 70, B16.5 CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 ASTM A860 Gr WPHY70 (con costura) CLASS 900, RTJ WN, A694 Gr. F70, ASME B16.47 Series A, wall thickness to match pipe. 14 30 CLASS 1500, RTJ WN, ASTM A694 Gr. 70, B16.5 24104 AC4B32 OPERATION ( 1 ) @ HIDROSTATIC TEST ( 2 ) TEMP. ºF -20 A 100 °F TEMP. ºF 2120 3/4 206 183 16 CLASS 900, RTJ WN, ASTM A694 Gr. F70 , ASME B16.36, wall thicknes to match pipe. ASTM A160, PBE. API 5L Gr. 70 SMLS. ORIFICE FLANGES FLANGES DESIGNSERVICE: B31.4 MAWP (PSIG)2220 DESIGN CODEANSI CLASS PRESSURE (PSIG) 900 1-1/2 -20 A 100 °F MAOP (PSIG) TEMP. ºF 2775CORROSION ALLOWANCE (Inch) 483612 42 Líquids Transportation -20 A 100 °F0,125 DN (Inches) TAG ELEMENTS 1 82 PLUGS & BUSHINGS NOT APPLYREDUCER COUPLINGS NOT APPLYPROHIBITED, to use blind instead plug. CLASS 6000, SW, ASTM A105, MSS SP-79 NOT APPLY FITTINGS ( 4 ) ASTM A860 Gr. WPHY70 (SMLS), ASME B16.9, wall thicknes to match pipe. CLASS 1500, ASTM A515 Gr. 70, ASME B16.48. CLASS 900, ASTM A515 Gr. 70, ASME B16.48. GASKETS CLASS 900, OVAL RING TYPE R, Soft Iron, 90 BHN max., flange ASME B16.5. O´LETS SWAGES UNIONS CLASS 1500, OVAL RING TYPE R, Soft Iron, 90 BHN max., flange ASME B16.5 NOT APPLY NOT APPLYASTM A860 Gr. WPHY70, MSS SP-95, Ends to match pipes (PBE ó BE x PE). NOT APPLYNIPPLES STUD BOLTS / NUTS PROHIBITED for this class. Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2H COUPLINGS ASTM A160, SCH. 160, PBE. CLASS 6000, Sockolet, A105, MSS SP-97 CLASS 6000, SW, A105, ASME B16.11( 5 ) CLASS 6000, SW, ASTM A105, ASME B16.11 ASTM A860 Gr. WPHY70 (con costura), ASME B16.9, wall thickness to match pipe. CLASS 900, OVAL RING TIPO R, Soft Iron, 90 BHN max.,flange ASME B16.47 Serie A. WELDOLET, ASTM A860 Gr. WPHY70 , MSS SP-97, Ends to match Head and Branch Piping. CLASS 900, ASTM A515 Gr. 70, design to ASME B16.47 Series A y ASME B31.3BLANKS ECP-VST-G-GEN-FT-001 744/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión:CODIGO Elaborado TAG CLASS @ @ AC4B32 OPERATION ( 1 ) @ HIDROSTATIC TEST ( 2 ) TEMP. ºF -20 A 100 °F TEMP. ºF 2120 DESIGNSERVICE: B31.4 MAWP (PSIG) 1 2220 DESIGN CODEANSI CLASS PRESSURE (PSIG) 900 ECP-VST-P-MET-ET-006 25/03/11 -20 A 100 °F MAOP (PSIG) TEMP. ºF 2775CORROSION ALLOWANCE (Inch) Líquids Transportation -20 A 100 °F0,125 BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30" S S S S W W W W W W W W W R R R R T S E A L S Instrumentation must complete this description. CW05A0I2 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. SPECIAL BRANCH V Á L V E S ( 6 ) GA05A0B2J / GA05A0B2L BA05A0F2J BA05A0I2H BA05A0F2H Instrumentation must complete this description. CK06A0I2 RELIEF CHECK CK06F0I2 GL06A0I2 GL05A0I2 BLOCK GL05A0B2 BA14K5I2H BA06A0I2H NE15H0I GA06F0I1J NO APLICA GA05A0I2J CK05A0I2 CK05A0B2 / CK05A0B2L CW06A0I2 BA06A0I2J BA05A0I2JBA14F0I1J GA06A0I2J NO APLICA GL06F0I2 CW05A0B2 30 S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. W = WELDOLET T = TEE H E A D 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 434.8.5 "Required Inspection and Acceptance Criteria" ASME B31.4-2006. 1. Operation Conditions must be fit to Particular Bases and Criteria of Design Project. S = SOCKOLET 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Inspection and Testing" from ASME B31.4. NOMENCLATURA 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings are prohibited for this class. For the interface mechanical / Instrumentation valves shalll be monoflnage type (flange x NPT), flange to connect process side and thread FNPT for instrument side; likewise for Temocouplas arrange shall be flanged. All conecctions shall use insulation Kits and valves shall be DB&B type, 316SS body and trim. 3. Wall thickness showed up correspond to F (design factor) : 0,72, and E (joint factor) : 1; in any other case, wall thickness must be calculated according to ASME B31.4 and pertinent design factor F, which could be lower than 0.72 (ASME B31.4-2006, 402.3.1 (h)) depending on special service conditions or location, but never will be upper than this value (ASME B31.4-2006, 402.3.1 (a)). ECP-VST-G-GEN-FT-001 745/761 TAG CLASS @ @ PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 AC4B32 Líquids Transportation900 B31.4 -20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG)2220 PRESSURE. (PSIG) CORROSION ALLOWANCE (Inch) DESIGN 21200,125 TEMP. ºF ANSI CLASS OPERATION ( 1 ) DESING CODE SERVICE: DN (pulg) TAG 1/2" - 1 1/2" BA14F0I1J 2" BA06A0I2J 3" - 10" BA05A0I2J 12" - 30" BA05A0F2J 1/2" - 1 1/2" GA06F0I1J 2" GA06A0I2J 3" - 10" GA05A0I2J 12" - 30" GA05A0B2J 12" - 30" GA05A0B2L Gate Valve, Class 900# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. Ball Valve, Class 5000#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. Ball Valve, Class 900# RTJ Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Ball Valve, Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Floating Ball , Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Gate Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. Gate Valve, Class 1500#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. VALVE TYPE VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 900# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Reinforced Nylon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D. B A L L G A T E Gate Valve, Class 900# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24". Design code API 6D, testing according to API 598. Gate Valve, Class 900#, THRU CONDUIT, RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 12" & Larger. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger 12 - 30 GA05A0B2L 1/2" - 1 1/2" GL06F0I2 2" GL06A0I2 3" - 10" GL05A0I2 12" - 30" GL05A0B2 1/2" - 1 1/2" CK06F0I2 2" CK06A0I2 3" - 4" CK05A0I2 6" - 24" CK05A0B2 6" - 24" CK05A0B2L 2" - 4" CW05A0I2 6" - 24" CW05A0B2 N E E D L E 1/2" - 1 1/2" NE15H0I G L O B E Globe Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602, testing according to API 598. Globe Valve, Class 900# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5 up to 24", ASME B16.47 series A on larger than 24" Design code ASME B16.34, testing according to API 598. Globe Valve, Class 900# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. & than 24". Design code API 6D, testing according to API 598. Globe Valve, Class 1500#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. Neddle valve, 6000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Check Valve, Class 900# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 594, testing according to API 598. Check Valve, Class 1500#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Check Valve, Class 900# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 900# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. C H E C K Check Valve, Class 900#, FULL-OPENING, RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 900# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. 1/2" - 1 1/2" BA14K5I2H 2" BA06A0I2H 3" - 10" BA05A0I2H 12" - 30" BA05A0F2H D O U B L E B L O C K & B L E E D Double Block and Bleed Ball Valve , Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Double Block and Bleed Ball Valve , Class 900# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Double Block and Bleed Ball Valve, Class 900# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Reinforced Nylon Seats, Gear Operator. Flanges ASME B16.5 up to 24", ASME B16,47 series A on larger than 24". Design code API 6D. Integral Monoflange Valve, 5000# RTJxNPT, Flanged (process) x Threaded connections, Double Block & Bleed Valve, Needle Blocks and Vent; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. ECP-VST-G-GEN-FT-001 746/761 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES TAG CLASE @ @ 1/2 CLASE ANSI MAOP (PSIG) DISEÑO MAWP (PSIG) -20 A 100 °F 0,125 PRUEBA HIDROSTATICA ( 2 ) TEMP. ºF @ NORMA DISEÑO 900AC4B32 PRESIÓN (PSIG) TEMP. ºF 2120CORROSIÓN PERMISIBLE (Pulg.) -20 A 100 °F OPERACIÓN ( 1 ) Transporte de Hidrocarburos Líquidos SERVICIO: TEMP. ºF 1412 DN (Pulgadas) TAG ELEMENTOS B31.4 36163 42 241 103/4 1-1/2 86 2018 -20 A 100 °F 2220 2775 42 4830 1,062" CLASS 900, RTJ WN, A694 Gr. F70, ASME B16.47 Serie A, agujero igual al del tubo. CLASE 900, RTJ WN, A694 Gr. F70, ASME B16.47 Serie A, agujero igual al del tubo. 1,188"0,812" 0,938" CLASE 900, RTJ WN, ASTM A694 Gr. F70 , ASME B16.5, agujero igual al del tubo.CLASE 1500, RTJ SW, ASTM A105, ASME B16.5 CLASE 900, RTJ, ASTM A694 Gr. F70, ASME B16.47 Serie A.CLASE 900, RTJ, ASTM A694 Gr. F70 , ASME B16.5. TUBERÍA ( 3 y 4 ) BRIDAS ( 5 ) CLASE 1500, RTJ WN, ASTM A694 Gr. 70, B16.5 ASTM A160, PBE. API 5L Gr. 70 SMLS. SCH. 160. XS WT. API 5L Gr. 70 ERW/DSAW ASTM A860 Gr. WPHY70 (con costura), STD. WT. SCH. 40 NO APLICA CIEGOS CLASE 1500, RTJ, ASTM A105, ASME B16.5 BRIDAS DE ORIFICIO CLASE 1500, RTJ SW, ASTM A105, ASME B16.5 CLASE 1500, RTJ WN, ASTM A694 Gr. 70, B16.5 CLASE 900, RTJ WN, ASTM A694 Gr. F70 , ASME B16.36, agujero igual al del tubo. ( 4 ) CLASE 900, OVAL RING TIPO R, Soft Iron, 90 BHN max.,brida ASME B16.47 Serie A. NIPLES Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2HESPARRAGOS / TUERCAS ASTM A160, SCH. 160, PBE. NO APLICA CLASE 6000, SW, A105, ASME B16.11( 5 ) ASME B16.9, espesor de pared igual al del tubo. CLASE 6000, SW, ASTM A105, ASME B16.11 SWAGES (BOTELLAS) CLASE 6000, SW, ASTM A105, MSS SP-79 PROHIBIDOS, Usar brida ciega para reemplazar tapón. EMPAQUES WELDOLET, ASTM A860 Gr. WPHY70 , MSS SP-97, extremos de acuerdo a espesores de Cabezal y ramal. CLASE 900, ASTM A515 Gr. 70, diseño por ASME B16.47 Serie A y ASME B31.3 CLASE 6000, Sockolet, A105, MSS SP-97 CLASE 900, OVAL RING TYPE R, Soft Iron, 90 BHN max., brida ASME B16.5. ESPACIADORES (BLANKS) O´LETS CLASE 1500, OVAL RING TYPE R, Soft Iron, 90 BHN max., brida ASME B16.5 CLASE 900, ASTM A515 Gr. 70, ASME B16.48. ASTM A860 Gr. WPHY70 (SMLS), ASME B16.9, espesor de pared igual al del tubo. CLASE 1500, ASTM A515 Gr. 70, ASME B16.48. UNIONES ACCESORIOS ( 4 ) NO APLICA NO APLICAASTM A860 Gr. WPHY70, MSS SP-95, extremos y espesores según tubos a soldar (PBE ó BE x PE). COUPLINGS REDUCTORES NO APLICA NO APLICA COUPLINGS (ACOPLES) TAPONES y BUSHINGS PROHIBIDAS para esta clase. NO APLICA ECP-VST-G-GEN-FT-001 747/761 CODIGO Elaborado Versión: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES TAG CLASE @ @ CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 CLASE ANSI MAOP (PSIG) DISEÑO MAWP (PSIG) -20 A 100 °F 0,125 PRUEBA HIDROSTATICA ( 2 ) TEMP. ºF @ NORMA DISEÑO 900AC4B32 PRESIÓN (PSIG) TEMP. ºF 2120CORROSIÓN PERMISIBLE (Pulg.) -20 A 100 °F OPERACIÓN ( 1 ) Transporte de Hidrocarburos Líquidos SERVICIO: TEMP. ºF B31.4 -20 A 100 °F 2220 2775 BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" S S S S W W W W W W W W W R R R R R R R T NOTAS: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T 30 S S S S BLOQUEO BA05A0I2JBA14F0I1J GA05A0I2J V Á L V U L A S ( 6 ) ALIVIO BA05A0F2J BA05A0F2H GL05A0B2 Completar por Instrumentación. GA05A0B2J / GA05A0B2LGA06F0I1J GA06A0I2J BA06A0I2H GL06F0I2 GL06A0I2 CW05A0B2NO APLICA GL05A0I2 NE15H0I NO APLICA Completar por Instrumentación. BA14K5I2H BA06A0I2J ESPECIAL RETENCIÓN CK06A0I2 CK05A0I2 CW05A0I2 CK06F0I2 CW06A0I2 S E L L O BA05A0I2H CK05A0B2 / CK05A0B2L 1 L C di i d O ió d b á j t l B C it i d Di ñ ti l d l P t DIAMETRO CONEXIÓN 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T W = WELDOLET 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Inspección y Pruebas del código B31.4. 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 434.8.5 "Inspección Requerida y Criterios de Aceptación de Soldadura" de ASME B31.4-2006. 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados deben ser usados sólo para servicio de agua y aire para instrumentación . Para la interfase Mecánica / Instrumentación las válvulas serán roscadas al accesorio de conexión requerido. S = SOCKOLET T = TEE D I A M E T R O C A B E Z A L NOMENCLATURA 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, y E (factor de junta): 1; para cualquier otro caso estos espesores de pared deberán ser calculados de acuerdo a ASME B31.4 y según el factor de diseño F que en caso de consideraciones especiales de servicio o de Localidad (Location) podría ser menor a 0.72 (ASME B31.4-2006, 402.3.1 (h)) , pero en ningún caso podrá ser superior a este valor (ASME B31 4-2006 402 3 1 (a)) ECP-VST-G-GEN-FT-001 748/761 TAG @ @ OPERACIÓN ( 1 ) TEMP. ºF 2120 CÓDIGO DE DISEÑO SERVICIO: -20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG) PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 AC4B32 900 B31.4 DISEÑO 2220 PRESIÓN(PSIG) CORROSION PERMITIDA (Inch) 0,125 Transporte de Hidrocarburos Líquidos ANSI CLASE DN (pulg) TAG 1/2" - 1 1/2" BA14F0I1J 2" BA06A0I2J 3" - 10" BA05A0I2J 12" - 30" BA05A0F2J 1/2" - 1 1/2" GA06F0I1J 2" GA06A0I2J 3" - 10" GA05A0I2J 12" - 30" GA05A0B2J 12" - 30" GA05A0B2L 1/2" 1 1/2" GL06F0I2 Válvula de globo Clase 1500# extremos socket paso reducido bonete apernado Vástago roscado y ascendente disco tipo tapón o semi tapón asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos disco y vástago en 316 SS; empacaduras en grafito Código de diseño API C O M P U E R T A Válvula de compuerta, Clase 1500#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase 900# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598. Válvula de compuerta, Clase 1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598 Válvula de compuerta, Clase 900# RTJ extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. Válvula de compuerta, Clase 900# RTJ extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A por encima de 24". Código de diseño API 6D, pruebas de acuerdo a API 598. TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN Válvula de bola, Clase 900# RTJ extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Nylon reforzado, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula de bola, Clase 5000#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 80 de 6" de longitud. Código de diseño API 6D, probada según API 598. Válvula de bola, Clase 900# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. B O L A Válvula de bola, Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. 1/2" - 1 1/2" GL06F0I2 2" GL06A0I2 3" - 10" GL05A0I2 12" - 30" GL05A0B2 1/2" - 1 1/2" CK06F0I2 2" CK06A0I2 3" - 4" CK05A0I2 6" - 24" CK05A0B2 6" - 24" CK05A0B2L 2" CW06A0I2 3" - 4" CW05A0I2 6" - 24" CW05A0B2 A G U 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA14K5I2H U E O & Válvula de globo, Clase 900# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5 hasta 24", ASME B16.47 serie A en tamaños mayores a 24". Design code ASME B16.34, probada de acuerdo a API 598. G L O B O Válvula de retención, Clase 900# RTJ, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a Válvula de globo, Clase 1500#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API Válvula integral monobrida, 5000# RTJxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. Válvula de Doble Bloqueo & Purga Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario) bola flotante hasta 6" / bola sobre muñones para 8" y mayores acceso lateral bonete apernado bola y asientos reemplazables y no lubricados cuerpo y bonete en fundición de acero al Válvula de retención, Clase 900# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de aguja, 6000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula de globo, Clase 900# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de globo, Clase 1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de retención, Clase 900# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 900# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. R E T E N C I Ó N Válvula de retención, Clase 1500#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API Válvula de retención, Clase 900# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. 2" BA06A0I2H 3" - 10" BA05A0I2H 12" - 30" BA05A0F2H D O B L E B L O Q U P U R G A Válvula de Doble Bloqueo & Purga, Clase 900# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. Válvula de Doble Bloqueo & Purga, Clase 900# RTJ extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Nylon reforzado, operada con reductor. bridas ASME B16.5 hasta 24" ó ASME B16.47 serie A para tamaños por encima de 24". código de diseño API 6D. Válvula de Doble Bloqueo & Purga, Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. ECP-VST-G-GEN-FT-001 749/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 CODIGO ECP VST P MET ET 006 Elaborado 25/03/11 TAG CLASS @ @ 1/2 42 48 @3600 16 HIDROSTATIC TEST ( 2 ) MAOP (PSIG) CORROSION ALLOWANCE (Inch) DESIGNANSI CLASS 1500 SERVICE: 10 -20 A 100 °F 3700 4625 OPERATION ( 1 ) -20 A 100 °F DESIGN CODE CLASS 1500, RTJ WN, ASTM A694 Gr. F70 , ASME B16.5, wall thicknes to match pipe. 1 0,125 TEMP. ºF TEMP. ºF PRESSURE (PSIG) TEMP. ºF -20 A 100 °F ECP-VST-P-MET-ET-006 25/03/11 B31.8 MAWP (PSIG)Transporte de GasAC5B31 14 CLASS 1500, RTJ WN, ASTM A694 Gr. F70 , ASME B16.36, wall thicknes to match pipe. CLASS 1500, RTJ, ASTM A694 Gr. F70 , ASME B16.5. PIPING ( 3 y 4 ) ORIFICE FLANGES CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 DN (Inches) TAG ELEMENTS 1 CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 DO NOT APPLY FLANGES SCH. 160 ASTM A106, PBE. 3/4 1-1/2 CLASS 1500, RTJ, ASTM A105, ASME B16.5.BLINDS XS. WT. 0,562" 0,594" 0,688" 4 8 0,75" 0,812" 0,875 1,062" API 5L Gr. 70, SMLS. 2018 363024122 3 6 DO NOT APPLY FITTINGS ( 4 ) PLUGS & BUSHINGS CLASS 6000, SW, ASTM A105, ASME B16.11COUPLINGS PROHIBITED, to use blind instead plug. GASKETS ASTM A860 Gr. WPHY70 (SMLS), ASME B16.9, wall thicknes to match pipe. CLASS 1500, OVAL RING TIPO R, Soft Iron, 90 BHN max., flange ASME B16.5 CLASS 1500, ASTM A515 Gr. 70, ASME B16.48. CLASS 6000, SW, A105, ASME B16.11( 5 ) BLANKS O´LETS Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2H WELDOLET, ASTM A860 Gr. WPHY70 , MSS SP-97, Ends to match Head and Branch Piping.CLASS 6000, Sockolet, A105, MSS SP-97 STUD BOLTS / NUTS DO NOT APPLY PROHIBITED for this class. SWAGES REDUCER COUPLINGS CLASS 6000, SW, ASTM A105, MSS SP-79 NIPPLES UNIONS ASTM A860 Gr. WPHY70, MSS SP-95, Ends to match pipes (PBE ó BE x PE). ASTM A106, SCH. 160, PBE. ECP-VST-G-GEN-FT-001 750/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión:CODIGO Elaborado TAG CLASS @ @ @3600 HIDROSTATIC TEST ( 2 ) MAOP (PSIG) CORROSION ALLOWANCE (Inch) DESIGNANSI CLASS 1500 SERVICE: -20 A 100 °F 3700 4625 OPERATION ( 1 ) -20 A 100 °F DESIGN CODE Versión: 1 0,125 TEMP. ºF TEMP. ºF PRESSURE (PSIG) TEMP. ºF -20 A 100 °F CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 B31.8 MAWP (PSIG)Transporte de GasAC5B31 BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T NE15H0I CK06F0I2 CK06A0B2 / CK06A0B2L CW06A0B2 CW06A0I2 BA06A0F2J V Á L V E S ( 6 ) BLOCK BA14K5I2H BRANCH CK06A0I2 GL06F0I2 GA06A0B2J / GA06A0B2L GL06A0B2GL06A0I2 GA06F0I1J GA06A0I2J BA14F0I1J BA06A0I2J CHECK NO APLICA 1 O ti C diti t b fit t P ti l "B d C it i f D i " P j t S E A L S RELIEF SPECIAL Instrumentation must complete this description. Instrumentation must complete this description. BA06A0F2HBA06A0I2H NO APLICA 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Design, Installation and Test" from ASME B31.8. NOMENCLATURA 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings are prohibited for this class. For the interface mechanical / Instrumentation valves shalll be monoflange type (flange x NPT), flange to connect process side and thread FNPT for instrument side; likewise for Temocouplas arrange shall be flanged. All conecctions shall use insulation Kits and valves shall be DB&B type, 316SS body and trim. W = WELDOLET 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. H E A D T = TEE 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 826 " Inspection of Welds" ASME B31.8 - 2007. S = SOCKOLET 3. Wall thickness showed up correspond to F (design factor) : 0,72, E (joint factor) : 1, and T ( temperature factor): 1; in any other case, wall thickness must be re-calculated to ASME B31.8 and according to "Location class", besides consideration of metal temperature and pipe manufacturing. ECP-VST-G-GEN-FT-001 751/761 TAG CLASS OPERATION ( 1 ) ANSI CLASS DESIGN DESING CODE SERVICE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 @ @ DN (pulg) TAG 1/2" - 1 1/2" BA14F0I1J 2" - 8" BA06A0I2J 10" - 24" BA06A0F2J 1/2" - 1 1/2" GA06F0I1J 2" - 8" GA06A0I2J 10" - 24" GA06A0B2J 10" - 24" GA06A0B2L Gate Valve, Class 1500#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. CORROSION ALLOWANCE (Inch) 3700 PRESSURE. (PSIG) TEMP. ºF Transporte de Gas 100 0,125 AC5B31 1500 OPERATION ( 1 ) TEMP. ºF 3600 -20 A 100 °F MAX. PRESIÓN (PSIG) Gate Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 10" & Larger. Flanges ASME B16.5. Design code API 6D, testing according to API 598. Gate Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. B31.8 G A T E Gate Valve, Class 1500#, THRU CONDUIT, RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 10" & Larger. Flanges ASME B16.5. Design code API 6D, testing according to API 598. VALVE TYPE VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Reinforced Nylon Seats, Gear Operator. Flanges ASME B16.5. Design code API 6D. Ball Valve, Class 5000#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. Ball Valve, Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Reinforced Nylon Seats, Lever Operator. Design code API 6D. B A L L 1/2" - 1 1/2" GL06F0I2 2" - 8" GL06A0I2 10" - 24" GL06A0B2 1/2" - 1 1/2" CK06F0I2 2" - 4" CK06A0I2 6" - 24" CK06A0B2 6" - 24" CK06A0B2L 2" - 4" CW06A0I2 6" - 24" CW06A0B2 N E E D L E 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA14K5I2H L E K & D Neddle valve, 6000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Integral Monoflange Valve, 5000# RTJxNPT, Flanged (process) x Threaded connections, Double Block & Bleed Valve, Needle Blocks and Vent; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. G L O B E C H E C K Check Valve, Class 1500#, FULL-OPENING, RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 594, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Globe Valve, Class 1500#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. Globe Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. Check Valve, Class 1500#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. Globe Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5. Design code ASME B16.34, testing according to API 598. g g g y p g p g g g g g 2" - 8" BA06A0I2H 10" - 24" BA06A0F2HD O U B L B L O C K B L E E D Double Block and Bleed Ball Valve , Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Double Block and Bleed Ball Valve, Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Reinforced Nylon Seats, Gear Operator. Flanges ASME B16.5. Design code API 6D. ECP-VST-G-GEN-FT-001 752/761 Versión: 1 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP VST P MET ET 006 Elaborado 25/03/11 TAG CLASE @ @ 1/2 DISEÑO OPERACIÓN ( 1 ) -20 A 100 °F PRESIÓN (PSIG) 0,125 4625 -20 A 100 °F 1 NORMA DISEÑOCLASE ANSI SERVICIO: PRUEBA HIDROSTATICA ( 2 ) ECP-VST-P-MET-ET-006 25/03/11 B31.8 MAWP (PSIG)MAOP (PSIG) @ TUBERÍA ( 3 y 4 ) BRIDAS DE ORIFICIO CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 NO APLICA ASTM A106, PBE. 3024 AC5B31 XS. WT. Transporte de Gas1500 TEMP. ºF 3600 TEMP. ºF -20 A 100 °F 3700 4863 4 362018 CLASS 1500, RTJ, ASTM A105, ASME B16.5. CLASS 1500, RTJ, ASTM A694 Gr. F70 , ASME B16.5. CLASS 1500, RTJ WN, ASTM A694 Gr. F70 , ASME B16.36, agujero de igual diámetro al del tubo. 0,688" 0,75" 0,812" 1,062" 14 TEMP. ºF CORROSIÓN PERMISIBLE (Pulg.) 42 CLASS 1500, RTJ WN, ASTM A694 Gr. F70 , ASME B16.5, agujero de igual diámetro al del tubo. 1-1/2 CIEGOS 12103/4 2 16 DN (Pulgadas) TAG ELEMENTOS 1 SCH. 160 0,594" BRIDAS 0,875 API 5L Gr. 70, SMLS. CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 0,562" 8 CLASE 6000, SW, ASTM A105, ASME B16.11 COUPLINGS REDUCTORES CLASE 6000, SW, ASTM A105, MSS SP-79 PROHIBIDOS, Usar brida ciega para reemplazar tapón.TAPONES y BUSHINGS COUPLINGS (ACOPLES) NIPLES ESPARRAGOS / TUERCAS SWAGES (BOTELLAS) ESPACIADORES (BLANKS) CLASE 1500, OVAL RING TIPO R, Soft Iron, 90 BHN max., brida ASME B16.5 CLASE 6000, Sockolet, A105, MSS SP-97 CLASE 1500, ASTM A515 Gr. 70, ASME B16.48. CLASE 6000, SW, A105, ASME B16.11( 5 ) O´LETS ACCESORIOS ( 4 ) WELDOLET, ASTM A860 Gr. WPHY70, MSS SP-97, Extremos de acuerdo a espesores de Cabezal y ramal. EMPAQUES NO APLICA ASTM A106, SCH. 160, PBE. ASTM A860 Gr. WPHY70, MSS SP-95, extremos y espesores según tubos a soldar (PBE ó BE x PE). Espárragos ASTM A193 Gr. B7, con par de tuercas pesadas de cabeza hexagonal ASTM A194 Gr. 2H UNIONES ASTM A860 Gr. WPHY70 (SMLS), ASME B16.9, espesor de pared igual al del tubo. NO APLICA. PROHIBIDAS para esta clase. ECP-VST-G-GEN-FT-001 753/761 Versión: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO Elaborado TAG CLASE @ @ DISEÑO OPERACIÓN ( 1 ) -20 A 100 °F PRESIÓN (PSIG) 0,125 4625 -20 A 100 °F Versión: 1 NORMA DISEÑOCLASE ANSI SERVICIO: PRUEBA HIDROSTATICA ( 2 ) CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 B31.8 MAWP (PSIG)MAOP (PSIG) @ AC5B31 Transporte de Gas1500 TEMP. ºF 3600 TEMP. ºF -20 A 100 °F 3700 TEMP. ºF CORROSIÓN PERMISIBLE (Pulg.) BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" NOTAS: 42" 36" S E L L O GA06A0I2J CW06A0B2 GL06A0I2 CK06A0I2 CW06A0I2 BA14F0I1J CK06F0I2 NO APLICA CK06A0B2 / CK06A0B2L NO APLICA BA06A0I2H GL06F0I2 V Á L V U L A S ( 6 ) BLOQUEO NE15H0I ALIVIO RETENCIÓN GA06A0B2J / GA06A0B2L GL06A0B2 BA14K5I2H DIAMETRO CONEXIÓN Completar por Instrumentación. BA06A0F2H Completar por Instrumentación. 1 L C di i d O ió d b á j t l B C it i d Di ñ ti l d l P t ESPECIAL GA06F0I1J BA06A0I2J BA06A0F2J 30" 26" 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Diseño, Instalación y Pruebas del código B31.8. NOMENCLATURA 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados están prohibidos para esta clase . Para la interfase Tubería / Instrumentación las válvulas serán del tipo monobrida (Brida x NPT), la brida conectará el lado de proceso y la rosca NPT hembra el lado del instrumento; para el caso de Temocouplas también se debe usar un arreglo bridado. Todas las conexiones deben usar Kit de Aislamiento y las válvulas deben ser tipo DB&P construidas tanto el cuerpo como los internos en material 316SS. 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. D I A M E T R O C A B E Z A L W = WELDOLET 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. S = SOCKOLET 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, E (factor de junta): 1, y T (factor por temperatura): 1; para cualquier otro caso estos espesores deberán ser re-calculados de acuerdo a ASME B31.8 y según la clase de locación (Location Class), aparte de las consideraciones por temperatura del metal y método de fabricación del tubo. 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 826 "Inspección de Soldadura" de ASME B31.8-2007. T = TEE ECP-VST-G-GEN-FT-001 754/761 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 TAG @ @ DN (pulg) TAG 1/2" - 1 1/2" BA14F0I1J 2" - 8" BA06A0I2J 10" - 24" BA06A0F2J 1/2" - 1 1/2" GA06F0I1J 2" - 8" GA06A0I2J 10" - 24" GA06A0B2J Válvula de compuerta, Clase 1500# RTJ extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5. Código de diseño API 6D, pruebas de acuerdo a API 598. MAX. PRESIÓN (PSIG) TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN O M P U E R T A Vál l d Cl 1 00# RTJ b id d THRU CONDUIT b d á d d di i fl ibl b l bó f did ASTM A216 G WCB i T i 8 d fi O d d B id ASME B16 Códi d di Válvula de bola, Clase 1500# RTJ extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Nylon reforzado, operada con reductor. bridas ASME B16.5. Código de diseño API 6D. Válvula de bola, Clase 5000#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 80 de 6" de longitud. Código de diseño API 6D, probada según API 598. Válvula de bola, Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. B O L A Válvula de compuerta, Clase 1500#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598. 0,125 AC5B31 OPERACIÓN ( 1 ) ANSI CLASE DISEÑO 3700 CÓDIGO DE DISEÑO 1500 B31.8 100 -20 A 100 °F PRESIÓN(PSIG) SERVICIO: TEMP. ºF TEMP. ºF Transporte de Gas 3600CORROSION PERMITIDA (Inch) 10" - 24" GA06A0B2L 1/2" - 1 1/2" GL06F0I2 2" - 8" GL06A0I2 10" - 24" GL06A0B2 1/2" - 1 1/2" CK06F0I2 2" - 4" CK06A0I2 6" - 24" CK06A0B2 6" - 24" CK06A0B2L 2" - 4" CW06A0I2 6" - 24" CW06A0B2 A G U J A 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA14K5I2H 2" - 8" BA06A0I2H C O Válvula de compuerta, Clase 1500# RTJ extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5. Código de diseño API 6D, pruebas de acuerdo a API 598. G L O B O O B L E Q U E O & U R G A Válvula de Doble Bloqueo & Purga, Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr WCB internos en 316 SS a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones asientos en Nylon reforzado operada por palanca Código de diseño API 6D Válvula de aguja, 6000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula integral monobrida, 5000# RTJxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. R E T E N C I Ó N Válvula de retención, Clase 1500# RTJ, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API Válvula de retención, Clase 1500# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de globo, Clase 1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5. Design code ASME B16.34, probada de acuerdo a API 598. Válvula de globo, Clase 1500#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, Válvula de globo, Clase 1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. 10" - 24" BA06A0F2H D O B L O Q P U ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. Válvula de Doble Bloqueo & Purga, Clase 1500# RTJ extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Nylon reforzado, operada con reductor. bridas ASME B16.5. código de diseño API 6D. ECP-VST-G-GEN-FT-001 755/761 CODIGO ECP VST P MET ET 006 Elaborado 25/03/11 PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 TAG CLASS @ @ 1/2 863/4 3 CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 DO NOT APPLY SCH. 160 B31.4 MAWP (PSIG) CLASS 1500, RTJ, ASTM A105, ASME B16.5.BLINDS ASTM A106, PBE. CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 PIPING ( 3 y 4 ) XS. WT. FLANGES CLASS 1500, RTJ, ASTM A694 Gr. F70 , ASME B16.5. 1,062"0,562" 0,594" 0,688" 0,75" 0,812" 0,875 ORIFICE FLANGES API 5L Gr. 70, SMLS. CLASS 1500, RTJ WN, ASTM A694 Gr. F70 , ASME B16.36, wall thicknes to match pipe. CLASS 1500, RTJ WN, ASTM A694 Gr. F70 , ASME B16.5, wall thicknes to match pipe. 0,125 TEMP. ºF 3600 DN (Inches) TAG ELEMENTS 1 ECP-VST-P-MET-ET-006 25/03/11 -20 A 100 °F 3700 4625 OPERATION ( 1 ) -20 A 100 °F PRESSURE (PSIG) TEMP. ºF 1500 @ HIDROSTATIC TEST ( 2 ) DESIGNSERVICE:ANSI CLASS MAOP (PSIG) CORROSION ALLOWANCE (Inch) Líquids TransportationAC5B32 1 DESIGN CODE 1-1/2 2 4 TEMP. ºF 42 4836 -20 A 100 °F 30241210 14 201816 CLASS 1500, ASTM A515 Gr. 70, ASME B16.48. ASTM A106, SCH. 160, PBE. Stud Bolts ASTM A193 Gr. B7, with 2 Heavy Hexagonal Nuts ASTM A194 Gr. 2H DO NOT APPLYASTM A860 Gr. WPHY70, MSS SP-95, Ends to match pipes (PBE ó BE x PE). PROHIBITED, to use blind instead plug.PLUGS & BUSHINGS CLASS 6000, SW, ASTM A105, MSS SP-79 COUPLINGS REDUCER COUPLINGS FITTINGS ( 4 ) GASKETS ASTM A860 Gr. WPHY70 (SMLS), ASME B16.9, wall thicknes to match pipe. WELDOLET, ASTM A860 Gr. WPHY70 , MSS SP-97, Ends to match Head and Branch Piping.CLASS 6000, Sockolet, A105, MSS SP-97 CLASS 1500, OVAL RING TIPO R, Soft Iron, 90 BHN max., flange ASME B16.5 UNIONS PROHIBITED for this class. BLANKS O´LETS CLASS 6000, SW, ASTM A105, ASME B16.11 SWAGES NIPPLES STUD BOLTS / NUTS CLASS 6000, SW, A105, ASME B16.11( 5 ) DO NOT APPLY ECP-VST-G-GEN-FT-001 756/761 CODIGO Elaborado PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: TAG CLASS @ @ B31.4 MAWP (PSIG) 0,125 TEMP. ºF 3600 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 -20 A 100 °F 3700 4625 OPERATION ( 1 ) -20 A 100 °F PRESSURE (PSIG) TEMP. ºF 1500 @ HIDROSTATIC TEST ( 2 ) DESIGNSERVICE:ANSI CLASS MAOP (PSIG) CORROSION ALLOWANCE (Inch) Líquids TransportationAC5B32 Versión: 1 DESIGN CODE TEMP. ºF -20 A 100 °F BALL GATE CONTROL GLOBE SWING WAFER NEEDLE DBP SPRING PILOT PACKAGES: GRAFHITE & OIL 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" THREADS: TEFLON, TAPE OR LIQUID 48" S S S S W W W W W W W W W R R R R R R R T NOTES: 42" S S S S W W W W W W W W W R R R R R R T 36" S S S S W W W W W W W W W R R R R R T BA06A0F2HBA14K5I2H GA06A0I2J 1 O ti C diti t b fit t P ti l "B d C it i f D i " P j t GA06A0B2J / GA06A0B2L BA06A0I2J CK06A0B2 / CK06A0B2L CW06A0B2 GL06A0I2 CK06A0I2 BRANCH NO APLICA BA06A0I2H S E A L S RELIEF NE15H0I CK06F0I2 CHECK SPECIAL V Á L V E S ( 6 ) BLOCK GA06F0I1J BA14F0I1J BA06A0F2J Instrumentation must complete this description. NO APLICA GL06F0I2 CW06A0I2 GL06A0B2 Instrumentation must complete this description. 30" S S S S W W W W W W W W W R R R R T 26" S S S S W W W W W W W W W R R R T 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = REDUCER TEE 1" R R T 3/4" R T 1/2" T 1. Operation Conditions must be fit to Particular "Bases and Criteria of Design" Project. 4. Both the circumferential welds (BW and SW) and the longitudinal (if any) shall be inspected according to paragraph 434.8.5 "Required Inspection and Acceptance Criteria" ASME B31.4-2006. 3. Wall thickness showed up correspond to F (design factor) : 0,72, and E (joint factor) : 1; in any other case, wall thickness must be calculated according to ASME B31.4 and pertinent design factor F, which could be lower than 0.72 (ASME B31.4-2006, 402.3.1 (h)) depending on special service conditions or location, but never will be upper than this value (ASME B31.4-2006, 402.3.1 (a)). H E A D 2. Both pressure test value and type of required test must be check to fit it to particular project conditions and to abide chapter "Inspection and Testing" from ASME B31.4. W = WELDOLET 5. Connections 1 1/2" and under must be socket and welded. Threaded fittings are prohibited for this class. For the interface mechanical / Instrumentation valves shalll be monoflnage type (flange x NPT), flange to connect process side and thread FNPT for instrument side; likewise for Temocouplas arrange shall be flanged. All conecctions shall use insulation Kits and valves shall be DB&B type, 316SS body and trim. S = SOCKOLET T = TEE 6. Trim material of valves could be changed; this change shall be justified and the proposed material thoroughly specified. In no case, the material proposed can be of lower specification than original material. NOMENCLATURA ECP-VST-G-GEN-FT-001 757/761 TAG CLASS DESIGN CODE SERVICE: PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 OPERATION ( 1 ) ANSI CLASS DESIGN TAG CLASS @ @ DN (pulg) TAG 1/2" - 1 1/2" BA14F0I1J 2" - 8" BA06A0I2J 10" - 24" BA06A0F2J 1/2" - 1 1/2" GA06F0I1J 2" - 8" GA06A0I2J 10" - 24" GA06A0B2J 10" - 24" GA06A0B2L TEMP. ºF Líquids Transportation SERVICE: 100 G A T E Gate Valve, Class 1500#, THRU CONDUIT, RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 10" & Larger. Flanges ASME B16.5. Design code API 6D, testing according to API 598. VALVE TYPE VALVES SPECIFICATIONS ( 6 ) DESCRIPTION Ball Valve, Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Reinforced Nylon Seats, Gear Operator. Flanges ASME B16.5. Design code API 6D. Ball Valve, Class 5000#, SW Ends, Floating ball; End Entry, Replaceable ball and Seats; Forged Carbon Steel ASTM A-105 Body and Cover; 316 SS Trim; Fire Safe according to API 607; Reinforced Teflon Seats; Lever operated; Regular bore. Supply with two (2) nipples A106 Gr B Sch. 40 6" lenght at both ends. Design code API 6D, testing according to API 598. Ball Valve, Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Floating Ball up to 6" diameter / Trunnion mounted ball on 8" and larger, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 607 for Floating Ball or API6FA for Trunnion mounted Ball, Reinforced Nylon Seats, Lever Operator. Design code API 6D. B A L L Gate Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body and Bonnet, 316 SS Stem, Disc & Seats, Graphite Packing. Handwheel. Design code API 6D, testing according to API 598. Gate Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Flexible Wedge Disc, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator on 10" & Larger. Flanges ASME B16.5. Design code API 6D, testing according to API 598. AC5B32 1500 B31.4 CORROSION ALLOWANCE (Inch) Gate Valve, Class 1500#, SW Ends, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Solid Wedge Disc; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 6D, testing according to API 598. MAX. PRESIÓN (PSIG) 0,125 OPERATION ( 1 ) TEMP. ºF 3600 -20 A 100 °F DESIGN 3700 PRESSURE. (PSIG) 1/2" - 1 1/2" GL06F0I2 2" - 8" GL06A0I2 10" - 24" GL06A0B2 1/2" - 1 1/2" CK06F0I2 2" - 4" CK06A0I2 6" - 24" CK06A0B2 6" - 24" CK06A0B2L 2" - 4" CW06A0I2 6" - 24" CW06A0B2 N E E D L E 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA14K5I2H to API 598. Check Valve, Class 1500#, SW Ends and screwed or bolted cover, Horizontal Swing, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & cover; 316 SS Disc, Stellite Seats. Design code API 6D, testing according to API 598. L E K & D Neddle valve, 6000 psig minimum CWP, MNPT process connection, FNPT other end; Screw Bonnet, Inside Screw-rising Stem; Replaceable Seats; 316 SS Body, Bonnet & Packing Nut; 316 SS Trim; Teflon Packing; Delrin seats, Complete with SS Operator. Integral Monoflange Valve, 5000# RTJxNPT, Flanged (process) x Threaded connections, Double Block & Bleed Valve, Needle Blocks and Vent; 316SS Body, bonnet & Trim, PTFE Stem & Bonnet seals, hand operator, Fire Safe API 6FA. Check Valve, Class 1500# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; Trim 8, Stellite Seats, Nylon Seals. Design code API 594, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends, Wafer Type, Replaceable Clapper & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body; 316 SS Clapper & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. G L O B E C H E C K Check Valve, Class 1500#, FULL-OPENING, RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Globe Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Graphite Packing. Gear Operator. Flanges ASME B16.5. Design code ASME B16.34, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Disc & Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Check Valve, Class 1500# RTJ Flanged Ends with Horizontal Swing, Bolted Bonnet, Replaceable Disc & seat, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, Trim 8, Stellite Seats, Nylon Seals. Design code API 6D, testing according to API 598. Globe Valve, Class 1500#, SW Ends, Reducer Port, Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats; Forged Carbon Steel ASTM A-105 Body & Bonnet; 316 SS Stem, Disc & Seats; Graphite Packing. Design code API 602, testing according to API 598. Globe Valve, Class 1500# RTJ Flanged Ends with Bolted Bonnet, Outside Screw & Yoke-rising Stem, Plug or Semi-plug Disc, Replaceable Disc & seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Stem, Plug & Seat, & Graphite Packing. Handwheel. Design code API 602 up to 4", larger than 4" ASME B16.34, testing according to API 598. 2" - 8" BA06A0I2H 10" - 24" BA06A0F2HD O U B L B L O C K B L E E D Double Block and Bleed Ball Valve , Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, 316 SS Trim, Fire Safe according to API 6FA, Reinforced Nylon Seats, Lever Operator. Design code API 6D. Double Block and Bleed Ball Valve, Class 1500# RTJ Flanged Ends with Full Port (Unless otherwise noted), Trunnion mounted ball, Side Entry, Bolted Bonnet, Non-Lubricated Replaceable Ball And Seats, Cast Carbon Steel ASTM A216 Gr. WCB Body And Bonnet, CS + ENP (3mils to ASTM B733) Ball, Fire Safe according to API 6FA, Reinforced Nylon Seats, Gear Operator. Flanges ASME B16.5. Design code API 6D. ECP-VST-G-GEN-FT-001 758/761 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: 1 PIPING MATERIAL SPECIFICATION CODIGO ECP VST P MET ET 006 Elaborado 25/03/11 TAG CLASE @ @ 1/2 -20 A 100 °F NORMA DISEÑO SERVICIO: 3700 3600CORROSIÓN PERMISIBLE (Pulg.) 4625 CLASE ANSI 1 1500 MAWP (PSIG)Transporte de Hidrocarburos LíquidosAC5B32 TEMP. ºF @0,125 3024 B31.4 PRUEBA HIDROSTATICA ( 2 ) 10 14 MAOP (PSIG) TEMP. ºF DISEÑO OPERACIÓN ( 1 ) -20 A 100 °F PRESIÓN (PSIG) TEMP. ºF -20 A 100 °F 423/4 201816122 BRIDAS CIEGOS CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 NO APLICA CLASS 1500, RTJ, ASTM A105, ASME B16.5. CLASS 1500, RTJ, ASTM A694 Gr. F70 , ASME B16.5. 4836 1,062" 6 XS. WT. 0,562" 0,594" 3 0,688" 0,75" 0,812" 0,875 4 8 DN (Pulgadas) TAG ELEMENTOS 1 1-1/2 TUBERÍA ( 3 y 4 ) BRIDAS DE ORIFICIO SCH. 160 CLASS 1500, RTJ WN, ASTM A694 Gr. F70 , ASME B16.5, agujero de igual diámetro al del tubo. ASTM A106, PBE. API 5L Gr. 70, SMLS. CLASS 1500, RTJ SW, ASTM A105, ASME B16.5 CLASS 1500, RTJ WN, ASTM A694 Gr. F70 , ASME B16.36, agujero de igual diámetro al del tubo. ECP-VST-P-MET-ET-006 25/03/11 CLASE 1500, ASTM A515 Gr. 70, ASME B16.48. NO APLICA. SWAGES (BOTELLAS) COUPLINGS (ACOPLES) Espárragos ASTM A193 Gr. B7, con par de tuercas pesadas de cabeza hexagonal ASTM A194 Gr. 2H EMPAQUES NIPLES ESPARRAGOS / TUERCAS ASTM A860 Gr. WPHY70 (SMLS), ASME B16.9, espesor de pared igual al del tubo.CLASE 6000, SW, A105, ASME B16.11( 5 ) CLASE 1500, OVAL RING TIPO R, Soft Iron, 90 BHN max., brida ASME B16.5 ESPACIADORES (BLANKS) O´LETS ACCESORIOS ( 4 ) WELDOLET, ASTM A860 Gr. WPHY70, MSS SP-97, Extremos de acuerdo a espesores de Cabezal y ramal. PROHIBIDAS para esta clase. CLASE 6000, SW, ASTM A105, ASME B16.11 CLASE 6000, SW, ASTM A105, MSS SP-79 CLASE 6000, Sockolet, A105, MSS SP-97 PROHIBIDOS, Usar brida ciega para reemplazar tapón. ASTM A106, SCH. 160, PBE. NO APLICAASTM A860 Gr. WPHY70, MSS SP-95, extremos y espesores según tubos a soldar (PBE ó BE x PE). COUPLINGS REDUCTORES UNIONES TAPONES y BUSHINGS ECP-VST-G-GEN-FT-001 759/761 VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES Versión: PIPING MATERIAL SPECIFICATION CODIGO Elaborado TAG CLASE @ @ -20 A 100 °F NORMA DISEÑO SERVICIO: 3700 3600CORROSIÓN PERMISIBLE (Pulg.) 4625 CLASE ANSI Versión: 1 1500 MAWP (PSIG)Transporte de Hidrocarburos LíquidosAC5B32 TEMP. ºF @0,125 B31.4 PRUEBA HIDROSTATICA ( 2 ) MAOP (PSIG) TEMP. ºF DISEÑO OPERACIÓN ( 1 ) -20 A 100 °F PRESIÓN (PSIG) TEMP. ºF -20 A 100 °F CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 BOLA COMPUERTA CONTROL GLOBO SWING WAFER AGUJA DBP RESORTE PILOTADA EMPAQUES: GRAFITO & ACEITE 1/2" 3/4" 1" 1.5" 2" 3" 4" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 30" 36" 42" 48" ROSCAS: TEFLON EN CINTA O LIQUIDO 48" NOTAS: 42" 36" BA06A0F2J V Á L V U L A S ( 6 ) BA14K5I2H BLOQUEO GL06A0B2 CK06F0I2 BA06A0F2H GL06F0I2 CK06A0B2 / CK06A0B2LCK06A0I2 Completar por Instrumentación. Completar por Instrumentación. CW06A0B2 NE15H0I CW06A0I2 NO APLICA RETENCIÓN NO APLICA S E L L O 1 C O ó á C GA06A0B2J / GA06A0B2L BA06A0I2H ESPECIAL BA06A0I2J GA06A0I2J DIAMETRO CONEXIÓN GL06A0I2 ALIVIO GA06F0I1J BA14F0I1J 30" 26" 24" S S S S W W W W W W W W W R R T 20" S S S S W W W W W W W R R R T 18" S S S S W W W W W W R R R T 16" S S S S W W W W R R R R T 14" S S S S W W W W R R R T 12" S S S S W W W R R R T 10" S S S S W W W R R T 8" S S S S W W R R T 6" S S S S W R R T 4" S S S S W R T 3" S S S S R T 2" S S S R T 1.5" R R R T R = TEE REDUCTORA 1" R R T 3/4" R T 1/2" T T = TEE 4. Tanto las soldaduras circunferenciales (BW y SW) como las longitudinales (si las hubiera), deberán ser inspeccionadas de acuerdo al párrafo 434.8.5 "Inspección Requerida y Criterios de Aceptación de Soldadura" de ASME B31.4-2006. S = SOCKOLET 3. Los espesores de pared mostrados corresponden a F (factor de diseño): 0,72, y E (factor de junta): 1; para cualquier otro caso estos espesores de pared deberán ser calculados de acuerdo a ASME B31.4 y según el factor de diseño F que en caso de consideraciones especiales de servicio o de Localidad (Location) podría ser menor a 0.72 (ASME B31.4-2006, 402.3.1 (h)) , pero en ningún caso podrá ser superior a este valor (ASME B31.4-2006, 402.3.1 (a)). W = WELDOLET 6. El material del trim de las válvulas podría ser cambiado; en caso de ser necesario este cambio se debe justificar y especificar claramente el material propuesto. En ningún caso el material propuesto podrá ser de menores especificaciones a las del original. 5. Las conexiones de 1 1/2" y menores deben ser embebidas y soldadas. Los accesorios roscados deben ser usados sólo para servicio de agua y aire para instrumentación . Para la interfase Mecánica / Instrumentación las válvulas serán roscadas al accesorio de conexión requerido. D I A M E T R O C A B E Z A L NOMENCLATURA 2. Tanto el valor de la prueba de presión como el tipo de prueba requerida deberá ser revisado para adecuarlos a las condiciones particulares del proyecto y para que cumplan con los requerimientos del capítulo de Inspección y Pruebas del código B31.4. 1. Las Condiciones de Operación se deberán ajustar a las Bases y Criterios de Diseño particulares del Proyecto. ECP-VST-G-GEN-FT-001 760/761 TAG @ @ DN (pulg) TAG 1/2" - 1 1/2" BA14F0I1J A 0,125 Transporte de Hidrocarburos Líquidos TIPO ESPECIFICACIONES DE VÁLVULAS ( 6 ) DESCRIPCIÓN -20 A 100 °F 100 TEMP. ºF MAX. PRESIÓN (PSIG) PRESIÓN(PSIG) 3600 OPERACIÓN ( 1 ) TEMP. ºF PIPING MATERIAL SPECIFICATION VICEPRESIDENCIA DE SERVICIOS Y TECNOLOGIA CORPORATIVO DE NORMAS Y ESTADARES CÓDIGO DE DISEÑO Válvula de bola, Clase 5000#, extremos socket , bola flotante; acceso por los extremos, asientos y bola reemplazable; Cuerpo y cubierta en acero al carbon forjado ASTM A-105 ; internos 316 SS; a prueba de fuego según API 607; asientos en teflon reforzado; operada por palanaca; paso normal. Suministrada con dos niples A106 Gr B Sch. 80 de 6" de longitud. Código de diseño API 6D, probada según API 598. SERVICIO: AC5B32 1500 B31.4 CORROSION PERMITIDA (Inch) ANSI CLASE DISEÑO 3700 CODIGO ECP-VST-P-MET-ET-006 Elaborado 25/03/11 Versión: 1 2" - 8" BA06A0I2J 10" - 24" BA06A0F2J 1/2" - 1 1/2" GA06F0I1J 2" - 8" GA06A0I2J 10" - 24" GA06A0B2J 10" - 24" GA06A0B2L 1/2" - 1 1/2" GL06F0I2 C O M P U E R T A Válvula de compuerta, Clase 1500#, extremos de enchufe, bonete apernado, vástago roscado y ascendente, disco tipo cuña sólida; cuerpo y bonete en acero al carbón forjado ASTM A 105; internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. código de diseño API 6D, probada de acuerdo a API 598. Válvula de compuerta, Clase1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón forjado ASTM A 105, internos en 316 SS (vástago, disco y asientos); empacaduras en grafito. operada por volante. Código de diseño API 6D, pruebas de acuerdoa API 598. Válvula de compuerta, Clase 1500# RTJ extremos bridados, THRU CONDUIT, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5. Código de diseño API 6D, pruebas de acuerdo a API 598. Válvula de compuerta, Clase 1500# RTJ extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo cuña flexible, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, internos Trim 8, empacaduras en grafito. Operada por reductor. Bridas ASME B16.5. Código de diseño API 6D, pruebas de acuerdo a API 598. B O Válvula de globo, Clase 1500#, extremos socket, paso reducido, bonete apernado, Vástago roscado y ascendente, disco tipo tapón o semi tapón, asientos y disco reemplazable; cuerpo y bonete en acero al carbón forjado ASTM A-105; asientos, disco y vástago en 316 SS; empacaduras en grafito. Código de diseño API 602, probada según API 598. Válvula de globo Clase 1500# RTJ extremos bridados bonete apernado vástago roscado y ascendente disco tipo tapón o semi tapón asientos y disco reemplazables cuerpo y bonete en acero al carbón fundido ASTM A216 Gr WCB; vástago tapón y asientos en 316 SS empacaduras en grafito operada por volante Código de diseño API 602 hasta 4"; ASME B16 34 Válvula de bola, Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. B O L A Válvula de bola, Clase 1500# RTJ extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Nylon reforzado, operada con reductor. bridas ASME B16.5. Código de diseño API 6D. 2" - 8" GL06A0I2 10" - 24" GL06A0B2 1/2" - 1 1/2" CK06F0I2 2" - 4" CK06A0I2 6" - 24" CK06A0B2 6" - 24" CK06A0B2L 2" - 4" CW06A0I2 6" - 24" CW06A0B2 Válvula de retención, Clase 1500# RTJ, FULL-OPENING, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, clapeta oscilante horizontal, bonete apernado, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. G L O B R E T E N C I Ó N Válvula de retención, Clase 1500# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de retención, Clase 1500# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, clapeta en 316 SS & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. Válvula de globo, Clase 1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, Trim 8, empacadura en grafito. Operada por engranaje. Bridas ASME B16.5. Design code ASME B16.34, probada de acuerdo a API 598. Válvula de globo, Clase 1500# RTJ, extremos bridados, bonete apernado, vástago roscado y ascendente, disco tipo tapón o semi-tapón, asientos y disco reemplazables, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB; vástago, tapón y asientos en 316 SS, empacaduras en grafito. operada por volante. Código de diseño API 602 hasta 4"; ASME B16.34 para tamaños por encima de 4", probada de acuerdo a API 598. Válvula de retención, Clase 1500#, extremos socket, cubierta roscada o apernada, clapeta oscilante horizontal, asientos y discos reemplazables; cuerpo y cubierta en acero al carbón forjado ASTM A-105; clapeta en 316 SS, asientos en stelita. Código de diseño API 6D, probada de acuerdo a API 598. 6 - 24 CW06A0B2 A G U J A 1/2" - 1 1/2" NE15H0I 1/2" - 1 1/2" BA14K5I2H 2" - 8" BA06A0I2H 10" - 24" BA06A0F2H Válvula de retención, Clase 1500# RTJ, extremos bridados, tipo wafer, asientos y clapeta reemplazable, cuerpo y bonete en acero al carbón fundido ASTM A216 Gr. WCB, TRIM 8 & asientos en stelita, sellos en naylon. Código de diseño API 6D, probada de acuerdo a API 598. D O B L E B L O Q U E O & P U R G A Válvula de Doble Bloqueo & Purga, Clase 1500# RTJ extremos bridados con paso completo (a menos que se especifique lo contrario), bola flotante hasta 6" / bola sobre muñones para 8" y mayores, acceso lateral, bonete apernado, bola y asientos reemplazables y no lubricados, cuerpo y bonete en fundición de acero al carbón ASTM A216 Gr. WCB , internos en 316 SS, a prueba de fuego según API 607 para bola flotante ó API6FA para bola sobre muñones, asientos en Nylon reforzado, operada por palanca. Código de diseño API 6D. Válvula de Doble Bloqueo & Purga, Clase 1500# RTJ extremos bridados con paso completo, bola montada sobre muñones, acceso lateral, bonete apernado, asiento y bola reemplazables no lubricados, cuerpo y bonete en acero al carbono fundido ASTM A216 Gr. WCB , bola en acero al carbono recubierta por medio de Electroless Niquel Plating (ENP) con 3 milesimas de pulgada de espesor mínimo, cumpliendo con ASTM B733, a prueba de fuego según API 6FA, asientos en Nylon reforzado, operada con reductor. bridas ASME B16.5. código de diseño API 6D. Válvula de aguja, 6000 psig mínimo CWP, MNPT conexión de proceso, FNPT el otro extremo; bonete roscado, vátago ascendente de roscado interior; asientos reemplazables; cuerpo, bonete, internos y tuercas en 316 SS; empacaduras en Teflon; asientos en Delrin o similar, Válvula integral monobrida, 5000# RTJxNPT, Doble Bloqueo & Purga, aguja para bloqueo y venteo, bridada (lado proceso) x roscada (lado instrumentos); cuerpo, bonete e internos en 316SS, sellos del vástago y bonete en PTFE (teflón), operada a mano, a prueba de fuego API 6FA. ECP-VST-G-GEN-FT-001 761/761 CE3A03A-01


Comments

Copyright © 2025 UPDOCS Inc.