Network design proposal for casino (Group 2) Project Scope The project aims to design a network for a casino. The casino has 10 floors including the ground floor. The ground floor has a lobby area. Each floor also has a lobby area. There are 40 rooms in each floor, each of which has a network point to which the guest PC is connected. The casino network has two servers which are used by the staff. A high speed internet connection is available which is to be shared by the guest and staff network. There is a total of 25 staff in the casino based at the ground floor. Network requirement 1. Network Topology diagram. 2. Identify the hardware required like routers, switches, access points (Cisco) 3. The network has to be segregated into guest and staff 4. The guest network should not have access to the staff network. 5. TCP/IP Network design and IP address table. 6. Configurations and features which are required to be configured on the devices. Hospital Network Design (Group 1) Project Scope A network proposal has to be designed for a hospital which has the following. There is a main block and three wards in the campus. The main block is the administrative block where registration of new patients takes place. The main block has 5 floors. The hospital has identified hospital management software, which should be accessible by the employees. The software is installed on a server at the administrative block. At the ground floor, there are 15 computers at the billing section. At other floors, there is one computer user each. The farthest distance between the computer on the top most floor and the ground floor is less than 70 meters. The wards have 5 floors each, with 10 computers in the gound floor of each ward. The distance between the wards and the blocks are less than 80 Meters. The computers in the wards may be increased based on future expansion plans. Network requirements 1. The employees should receive dynamic IP addressing from a central server. 2. Network should be loop free at Layer 2 3. Every computer should be able to access the hotel management software from each of the location using a fixed IP address. 4. IP Network design table. 5. Network topology diagram with necessary equipment’s Network design proposal for Bank (Group 3) Abstract A network proposal has to be developed for a bank. The bank has a main office, which is located in London, and has 5 branch offices located at Paris, California, India, Dubai and Qatar. The bank has an application server, which is used by it’s customers across the world for online transactions. All the branches have high speed internet connection. There are approximately 100 users in each of the branch offices and 200 users in the main office. Network requirements. 1. Identify the hardware components required to setup the network for the Bank 2. High availability should be available to the application server, which is accessible using https protocol. 3. IP network design for the branch and main offices. 4. IP addressing range for users and hardware components. 5. The users at different locations should be able to access each other, including the application server. 6. Network Topology diagram. Network design proposal for airport (Group 4) Project Description The project is to design a proposal for setting up a network in an airport. The airport has three departments. 1. Airport authority 2. Flight service providers 3. Guests. The airport authority maintains a server which handles the flight management controls. The flight service providers should have access only to the specific server in the airport authority network and not to any other systems. The guest users should have wireless access to a high speed internet connection, which should be shared among all the users in all the departments. The wireless access should be using a common password. The guest users should not have access to the other two departments. The users should obtain IP addresses automatically. The airport authority has 20 users, the flight service providers have 40 users and the maximum numbers of guests are estimated to be 100. Networking Requirement. 1. The active networking components (Routers, switches, wireless access points etc) with quantity. 2. The IP network design for each department. 3. Creating and mapping IP networks with vlans. 4. Dynamic IP addressing design for all the networks. 5. Network topology diagram.