DL1-03 99 502-ELK_main_en N 1 (2).pdf (SEÑALIZACION).pdf

KDS50 SignalizationTechnical Information for Sales Table of Contents 1 COMMON CHARACTERISTICS ..................................................................................................................... 2 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 FILL HEIGHT COP........................................................................................................................................... 6 2.1 2.2 3 Usage ...................................................................................................................................................................... 2 Buttons .................................................................................................................................................................... 2 Floor markings........................................................................................................................................................ 2 Display color availability........................................................................................................................................ 3 Available languages .............................................................................................................................................. 3 Gong on car top ..................................................................................................................................................... 3 Maximum served floors......................................................................................................................................... 3 Control features and text indications................................................................................................................... 4 COP load plates available .................................................................................................................................... 5 Description .............................................................................................................................................................. 6 Full height COP location (maximum 2 COPs with 1 handicap COP in one car) .......................................... 7 PH COP #1 AND #2 ....................................................................................................................................... 10 3.1 3.2 Description ............................................................................................................................................................ 10 Partial height COP location (maximum 2 COPs with 1 handicap COP in one car) ................................... 11 4 KDS50 HANDICAP COP ............................................................................................................................... 14 5 LANDING SIGNALIZATION .......................................................................................................................... 16 5.1 5.2 5.3 5.4 5.5 6 Location................................................................................................................................................................. 16 LCS / LCI............................................................................................................................................................... 17 Fireman’s switch .................................................................................................................................................. 18 HI / HL.................................................................................................................................................................... 19 Possible connections at landing ........................................................................................................................ 20 APPROVAL AND VERSION HISTORY......................................................................................................... 21 © 2006 KONE Corporation All rights reserved 1(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 1 COMMON CHARACTERISTICS 1.1 Usage The KDS50 signalization system is used for the following KONE products: • • • • • • • • KONE 3000 MonoSpace® KONE 3000 MiniSpace™ KONE 3000S MonoSpace® KONE 3000S MiniSpace™ KONE TranSys™ KONE 3000X Minispace™ KONE 3000E Minispace™ KONE 5000 MiniSpace™ Note: KDS50 signalization is only suitable for Asia market, but it is not available for code SS 550. 1.2 Buttons All buttons have built-in registered light color LED except the Alarm button. The Alarm button is yellow; it can be illuminated when the normal power supply of elevator is switched off. • Mounting method: surface mounted • Button types: Round black button without braille. Round silver button with or without braille. • Button color: Red (available for dot matrix and 7-segments displays) White (for landing, white button must be used when STN LCD display is selected; for COP, white button is optional when STN LCD display is selected.) • Call registered buzzer: optional 1.3 Available floor markings on button and display Display Floor markings 7-segments -4 to -1 / 0 to 63 -4 to -1 / 0 to 63, LG, B, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, P1, P2, P3, P4, F, M1, L1, L2, 13A, 23A, 33A, E, G, M, 3A, 3B, P, 2A, 2B, 12A, 12B, 22A, 22B, 32A, 32B -4 to -1 / 0 to 63, LG, B, B1, B2, B3, B4, B5, B6, B7, B8, B9, P1, P2, P3, P4, F, M1, L1, L2, E, G, M, 3A, 3B, P, 2A, 2B Dot matrix STN LCD © 2006 KONE Corporation All rights reserved 2(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 1.4 Display color availability COP indicator Hall indicator Hall lantern LCI Red 7-segments X X X X STN LCD with black background and white text X X X STN LCD with blue background and white text X X X Red Dot matrix X X X Display colors Note: The STN LCD display with black background is not recommended in an environment where it is too bright or dark. 1.5 Available languages Languages Load plate STN LCD 7-segments Dot matrix English X X X X Simplified Chinese X X X X Traditional Chinese X X Korean 1.6 X Gong on car top KDS50 allows a gong to be connected to the car operating panel (COP) display board and to be installed on the top of the car. For more information on gong on car top (GOC ET) feature, see DL1-04.18.001. 1.7 Maximum served floors Signalization system Maximum served floors KDS50 63 KDS50 PH (Partial Height), one COP 24, including dummy floors KDS50 FH (Full Height), one COP 39, including dummy floors KDS50 FH (Full Height), two COP 63, including dummy floors © 2006 KONE Corporation All rights reserved 3(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 1.8 Control features and text indications Display Control features and text indications Car Landing STN LCD Dot matrix 7-segments STN LCD 7-segments Floor number X X X X X OLF (overload) X X X X X (only in HI) X X X (only in HI) X X X (only in HI) General indications Full load Options using key switches mounted on COP (maximum 4 options) OSS COI (out of service) X PRC K (priority call in car) X X OCL AF (light operation) OCV AF (fan operation) ATS C (attendant (1) service) . X LOC (car call locking) FRD CS (fireman’s drive) X FRD AE (fireman’s drive) X Options using key switches mounted at landing PRL (priority call at landing) X LOL (landing call locking) X OSS LC (out of service) X X HEL A (hospital emergency service at landing) (1) Up to 63 floors for FH COP, up to 16 floors for PH COP © 2006 KONE Corporation All rights reserved 4(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 1.9 COP load plates available Load (kg) Persons EN CN Load (kg) Persons EN 320 4 X X 1020 15 X 320 5 X 1090 16 X 340 5 X 1150 15 X 400 5 X 1150 17 X 400 6 X 1155 17 X 410 6 X 1275 17 X 450 6 X 1275 19 X 475 7 X 1350 18 X 480 6 X 1350 20 X 550 8 X 1360 20 X 600 9 X 1495 22 X 610 9 X 1600 21 X 630 8 X 1600 24 X 680 10 X 1700 25 X 750 11 X 1800 24 X 800 10 X 1800 26 X 800 12 X 1800 27 X 885 13 X 1835 27 X 900 12 X 1905 28 X 900 13 X 2000 26 X 1000 13 X 2000 29 X 1000 15 X 2000 30 X © 2006 KONE Corporation All rights reserved X X X X X X 5(21) CN X X X X X X DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 2 FULL HEIGHT COP 2.1 Description The full height COP has the following attributes: • • • • • • • • • • Flush mounted in the car wall Width = 225 mm Height (H) = CH + 63 mm (MCD car with any ceiling types except LF1) H = CH + 100 mm (EuReCa 2.0 car) H = CH + 15 mm (MCD car with ceiling type LF1) H = CH + 15 mm (TranSys™ car with ceiling type LF1) H = CH + 115 mm (TranSys™ car with ceiling type LF51) H=CH+15mm (OMC car ceiling type LF10 and LF11) H=CH+ 85mm (OMC car ceiling type LF12 and LF66E) STN LCD, dot matrix or 7-segments display The call buttons are always fitted from left to right and from bottom to top on the COP. The locations of function buttons and key switches are fixed. These buttons are "door close", "door open" and "alarm", as shown in the picture. Note: (1) For Through-type cars, the number of call buttons is same as the number of served floors in the corresponding side. (2) A maximum of four key switches can be selected at the same time among OSS COI; PRC K; OCL AF; OCV AF; ATS C and LOC, FRD CS and FRD AE features. (For KONE TranSys™ the maximum number of key switches is 2 and OCL AF is not available.) STN LCD display © 2006 KONE Corporation All rights reserved 6(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 2.2 Full height COP location (maximum 2 COPs with 1 handicap COP in one car) MCD car SEC: The COP is located on the front wall when the width of front wall ≥ 300 mm; otherwise the COP is located on the side wall. The second COP (auxiliary COP) is an option. It is fixed on the front wall and follows the selection rule for both FL and FR ≥ 300 mm. SEC Primary COP Second COP A1 A2 A2 A1 D1 B2 B2 D1 TTC: Though type car, two sets of car buttons (TTC CTS) Though type car, one set of car buttons (TTC CON) TTC car TTC CTS Primary COP TTC COP A1 C2 A2 C1 D1 D2 B2 B1 TTC CON Primary COP D1 D2 B1 B2 © 2006 KONE Corporation All rights reserved 7(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales EuReCa 2.0 car SEC: The primary COP is located on front wall when the width of front wall ≥ 350 mm and the car door operator is of base duty type. Otherwise the primary COP is located on the side wall. The auxiliary COP (without key switch) is used as an option, the location is as below. For full glass wall (GWf), COP is located at A1 or A2. SEC car SEC Primary COP Second COP A1 None A2 None B2 D1 D1 B2 TTC: Though type car, two sets of car buttons (TTC CTS) Though type car, one set of car buttons (TTC CON) TTC car TTC CTS Primary COP TTC COP A1 C2 A2 C1 B2 D2 D1 B1 TTC CON Primary COP D1 D2 B1 B2 © 2006 KONE Corporation All rights reserved 8(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales KONE TranSys™ car SEC: Only one COP is located on the side wall, D1 or B2. TTC: Two COPs are located on the side walls. Primary COP TTC COP D1 D2 B2 B1 OMC car (for KONE 3000E MiniSpace™ elevator) There is only one COP in one car. SEC: The COP is located only on the front wall when the width of the front wall ≥ 300 mm. COP location A1 A2 © 2006 KONE Corporation All rights reserved 9(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 3 PH COP #1 AND #2 Partial height COP is not available for KONE 3000 TranSys™ and KONE 3000E MiniSpace™ elevators. 3.1 Description The partial height COP has the following attributes: • • • • • Surface mounted on the car wall COP back box thickness of 31 mm Maximum 2 key switches Dot matrix or 7-segments display Up to 24 floors (for ATS only up to 16 floors) 7-segments indicator Note 1: For Through-type cars, the number of call buttons is same as the number of served floors in the corresponding side. Note 2: In case 2 COPs are mounted on the front wall, it is possible to order only 1 display. Partial height COP #1 © 2006 KONE Corporation All rights reserved 10(21) Partial height COP #2 DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 3.2 Partial height COP location (maximum 2 COPs with 1 handicap COP in one car) MCD car SEC: The COP is located on the front wall when the width of front wall ≥ 300 mm. Otherwise the COP is located on the side wall. The second COP (auxiliary COP) is an option. It is fixed on the front wall and follows the selection rule for both FL and FR ≥ 300 mm. SEC Primary COP Second COP A1 A2 A2 A1 D1 B2 B2 D1 TTC: Though type car, two sets of car buttons (TTC CTS) Though type car, one set of car buttons (TTC CON) TTC Car TTC CTS Primary COP TTC COP A1 C2 A2 C1 D1 D2 B2 B1 TTC CON Primary COP D1 D2 B1 B2 © 2006 KONE Corporation All rights reserved 11(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales EuReCa 2.0 car SEC: The primary COP is located on the front wall when the width of the front wall ≥ 300 mm. Otherwise the COP is located on the side wall. The auxiliary COP (without key switch) is used as an option, the location is as below. SEC car SEC Primary COP Second COP A1 None A2 None B2 D1 D1 B2 TTC: Through-type car, two sets of car buttons (TTC CTS) Through-type car, one set of car buttons (TTC CON) TTC car TTC CTS Primary COP TTC COP A1 C2 A2 C1 D1 D2 B2 B1 TTC CON Primary COP D1 D2 B1 B2 © 2006 KONE Corporation All rights reserved 12(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales KONE TranSys™ car SEC: Only one COP is located on the side wall, D1 or B2. TTC: Two COPs are located on the side walls. Primary COP TTC COP D1 D2 B2 B1 © 2006 KONE Corporation All rights reserved 13(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 4 KDS50 HANDICAP COP Location and car interface The handicap COP is surface mounted on the side wall. It is always delivered with the main COP. Handicap COP does not have key switch. It is only available for SEC car. Served floors Maximum number of served floors is 24. Dimensions 560 × 200 × 32 mm, if 1 ≤ maximum number of floors ≤ 8 800 × 230 × 32 mm, if 9 ≤ maximum number of floors ≤ 24 Outlook Faceplate material options: • Silver brushed stainless steel • Black polycarbonate Aluminum frame finishing option: • Mirror polished • Satin Button option: • Button type: KDS50 surface mounted button with silver pressel. • Button with Braille: built-in KONE logo and handicap sign • Silver brushed stainless steel: marking Laser on faceplate • Black polycarbonate faceplate: separate metal label on faceplate © 2006 KONE Corporation All rights reserved 14(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales Handicap COP button © 2006 KONE Corporation All rights reserved 15(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 5 LANDING SIGNALIZATION 5.1 Location Position Description 1 Hall lantern 2 Hall indicator 3 Landing call station Simplex / Duplex landing call station with indicator 4 © 2006 KONE Corporation All rights reserved 16(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 5.2 LCS / LCI The Landing call station (LCS) / Landing call station with indicator (LCI) has the following attributes: • Surface mounted on the landing wall. • STN LCD, dot matrix or 7-segments display • Multiple display colors, including: • • - Red (available for Dot matrix and 7-segments displays) - Black background with white text (only available for STN LCD display) - Blue background with white text (only available for STN LCD display) Multiple options: - Handicap sign plate - “IN CASE OF FIRE DO NOT USE LIFT” or “如遇火警勿用电梯” plate - Button with braille - Buzzer If more than 2 key switches are needed, additional single key switch will be provided. Note: LCI and LCII display type should be the same as COP display type. LCS © 2006 KONE Corporation All rights reserved 17(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales LCI / LCII Dot matrix / 7-segments / STN LCD 5.3 Fireman’s switch The fireman’s switch is flush mounted on the landing wall. Language option: Simplified Chinese; Traditional Chinese and English; English. © 2006 KONE Corporation All rights reserved 18(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 5.4 HI / HL The Hall indicator (HI) / Hall lantern (HL) has the following attributes: • Surface mounted on the landing wall • Multiple display color: - Red (available for dot matrix and 7-segment displays) - Black background with white text (only available for STN LCD display) - Blue background with white text (only available for STN LCD display) • Finishing option: brushed stainless steel • STN LCD, dot matrix or 7-segment display option for HI • Option: Gong Note: The HI display and COP display must be the same type. © 2006 KONE Corporation All rights reserved 19(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 5.5 Possible connections at landing © 2006 KONE Corporation All rights reserved 20(21) DL1-03.99.502-ELK (N) 2012-06-08 KDS50 Signalization Technical Information for Sales 6 APPROVAL AND VERSION HISTORY Compiled by: PIA / Zhang Ling Checked by: PCM / He Shengnian Approved by: Timo Pakarinen Issue Date (-) 2005-07-01 A 2006-01-01 B 2006-07-01 C 2006-08-01 D 2007-02-15 E 2007-07-15 F 2008-03-03 G 2008-07-31 H 2009-03-01 I 2009-09-01 J 2010-03-01 K 2010-09-30 L 2011-03-15 M 2011-09-30 N 2012-06-08 Description of change Change by First issue Markku Haivala Add COP location and landing connection update. Add double COP information. Add new load plate COP info. Add COP location for 13 types of new TM MiniSpace car size. Add some information. Add K3000 note in usage. Add note for LCI and HI. Add a picture for LCS. Change some pictures for COP. Add (MAX two COPs in one car) for 3.2 Partial height COP location. Change value for FH COP. Change fireman’s key switch picture. Update handicap COP. Change DOT (scrolling indication) to DOT (scrolling direction arrow). Add dimension for marking with braille. Mark the COP location for TranSys cars. Add STN LCD Correct a typo. Changed “drive 1 / railing 1” to “base duty”. Updated 1.4 Display color availability. Updated one of FH COP pictures KONE 3000E MiniSpace™ added. Options for FH COP added. Added COP position description for EuReCa 2.0 car with full glass wall. Updated full height COP attribute. © 2006 KONE Corporation All rights reserved Approved by 21(21) Jeanne Wang Markku Haivala Gong Yun Markku Haivala Gong Yun Markku Haivala Gong Yun Paivarinta Reijo Gong Yun Luca Galbiati Zhang Ling Luca Galbiati Zhang Xin Deb Robbins Zhang Xin Deb Robbins Zhang Ling Deb Robbins Shao Wenwen Timo Pakarinen Shao Wenwen Timo Pakarinen Gao Xiaoqing Timo Pakarinen Xu Yang Timo Pakarinen Zhang Ling Timo Pakarinen DL1-03.99.502-ELK (N) 2012-06-08