DIN Standard for Mining.pdf

June 27, 2018 | Author: riysall | Category: Track (Rail Transport), Rail Transport, Track Gauge, Belt (Mechanical), Coal Mining
Share
Report this link


Description

Register of Mining Standardsdated 2010-12 Published by FABERG Normenausschuss Bergbau im DIN Deutsches Institut für Normung e.V. Contact Hans Georg Blasgude [email protected] FABERG Normenausschuss Bergbau Page 1 of 45 Foreword Normenausschuss Bergbau (FABERG) is an agency of DIN Deutsches Institut für Normung e.V., Berlin. As a joint establishment of the German mining industry, it is supported by Vereinigung Rohstoffe und Bergbau e.V., Berlin and managed by a governing body. From a management and staff point of view, it is associated with DMT DeutscheMontanTechnologie für Rohstoff, Energie, Umwelt e.V. of Essen. FABERG is responsible for national standardisation in the field of mining and acts as a representative for this field in European (CEN) *) and international (ISO) **) standardisation efforts, supporting the introduction of standards in its specialised field for any practice affected by these and is instrumental in establishing the German standards system. An association representing the interests of the mining industry was formed as early as at the end of the 1800s – as a joint effort of mines in the German Ruhr area – also dealing with issues of standardisation and recommending to its member companies the use of specific pipes and underground rail systems. After World War I, a committee was formed, dealing with standardisation on behalf of the coal mining industry in the German Rhineland and Westphalia. It was realised at an early date that standardisation involving the entire mining industry would be more effective and useful. This lead to the foundation of Fachnormenausschuss für den Bergbau (FaBerg) on November 28th, 1922 at Hannover. Whereas during the first years of FABERG’s existence, dimensional and type standards were primarily set up, these were increasingly followed by quality and demand-based standards. Personal safety equipment, too, was subject to standardisation at an early date. In 1955, during the ISO General Assembly at Stockholm, the foundation of a “Mining” technical committee - ISO/TC 82 – was resolved, management of which was transferred to FABERG. In addition to this, FABERG is responsible for German representation in ISO/TC 27 "Solid Mineral Fuels". Within the scope of its CEN work delegated by the EU, FABERG was allocated the CEN/TC 196/WG 3 "Hydraulically Powered Support“ and CEN/TC 305/WG 5 "Equipment and Protective Systems for Mining" Secretariat. FABERG co-operates with other standards committees of DIN, CEN and ISO at national, European and international level, in order to represent the interests of the mining industry. The Register of Standards comprises ISO standards of TC 27 "Solid Mineral Fuels" and of TC 82 "Mining". The register also includes Operating Recommendations for Mining (Bergbau-Betriebsblätter). These are recommendations set up by professionals, based on the same principles, which are mandatory for wording DIN standards. Users of these recommendations are subject to examining whether any arrangements recommended in these are adequate. BergbauBetriebsblätter are published by DMT DeutscheMontanTechnologie für Rohstoff, Energie, Umwelt e.V. Bergbau-Betriebsblätter may be ordered from DMT DeutscheMontanTechnologie für Rohstoff, Energie, Umwelt e.V., FABERG, Normenausschuss Bergbau, Am Technologiepark 1, 45307 Essen, Tel: (0201) 172-1553. The Standards Inspection Office of DIN in FABERG is available for inspection of any national DIN standards. Research work may be conveniently performed through the Perinorm database of BSI, AFNOR and DIN and ISO/IEC, CEN/CENELEC standards. Opening times of Standards Inspection Office (Normenauslegestelle): Monday to Friday: 8.00 a.m. to 11.30 a.m. and 1.00 p.m. to 2.30 p.m. --------*) CEN = Comité Européen de Normalisation **) ISO = International Organization for Standardization FABERG Normenausschuss Bergbau Page 2 of 45 The numbers after the titles of DIN standards and DIN drafts in brackets are price groups (dated 2009-01-01); they correspond with the following prices: Preisgr. EUR Preisgr. EUR Preisgr. EUR 01 14,70 19 114,00 37 280,60 02 21,50 20 119,00 38 304,30 03 21,50 21 124,50 41 323,90 04 21,50 22 129,10 42 343,20 05 30,60 23 134,00 06 37,10 24 139,60 07 43,40 25 144,10 08 49,90 26 149,10 09 56,10 27 154,60 10 62,20 28 159,70 11 68,60 29 164,60 12 75,10 30 169,50 13 81,10 31 174,20 14 87,40 32 190,80 15 93,80 33 204,10 16 99,10 34 220,80 17 104,00 35 232,80 18 108,80 36 256,80 Further information on prices you will get by DIN Deutsches Institut für Normung e.V. in Berlin. The numbers after the titles of "Bergbau-Betriebsblätter" in brackets are price groups (dated 2009-01-01); they correspond with the following prices: Group EUR 1 7,70 2 10,50 3 13,10 4 15,70 5 21,60 FABERG Normenausschuss Bergbau Page 3 of 45 Register of Mining Standards 2010-12 FB Shaft 01 01 Shaft NA 008-01-01-01 AK Shaft sinking devices DIN 21151 DIN 21164 DIN 21181-1 DIN 21181-2 DIN 21186 DIN 21187 DIN 21194 DIN 21198 11.09 Shaft sinking; pulleys for flat winding ropes; safety requirements and testing (8) 05.03 Shaft sinking - Riders for winding kibbles - Safety requirements and testing (12) 03.10 Shaft sinking Debris kibbles - Part 1: Debris kibbles with suspension hanger (12) 03.10 Shaft sinking; debris kibbles - Part 2: Debris kibbles with suspension two-strand chain set (9) 04.94 Shaft sinking; rope suspension gears for load hoisting in shafts; safety requirements and testing (6) 04.94 Shaft sinking; chain suspension gears for load hoisting in shafts; safety requirements and testing (5) 12.99 Shaft sinking - Abutment for guide ropes - Safety requirements and testing (7) 11.09 Shaft sinking - Shaft plumbs (6) NA 008-01-01-02 AK Freezing shaft construction DIN 4930 06.89 Pipes for use in freezing shaft sinking; dimensions and technical delivery conditions (5) NA 008-01-01-03 AK Shaft support DIN 21500 11.01 Shaft sinking in mining - Design and dimensioning (12) NA 008-01-02-01 AK Hoist ropes DIN 4118 DIN EN 12385-1 DIN EN 12385-2 DIN 12385-2/B1 06.81 Head frames and winding towers for mines; Design loads, calculation principles and design principles (4) /FABERG co-author/ 01.09 Steel wire ropes - Safety - Part 1: General requirements; German version EN 12385-1:2002+A1:2008 (12) /FABERG co-author/ 06.08 Steel wire ropes - Safety - Part 2: Definitions, designation and classification; German Version prEN 12385-2:2002/+A1:2008 (20) /FABERG co-author/ 01.09 Steel wire ropes - Safety - Part 2: Definitions, designation and classification; German Version prEN 12385-2:2002/+A1:2008, Corrigendum to DIN EN 12385.2:2008-06 /FABERG co-author/ 06.08 Steel wire ropes - Safety - Part 3: Information for use and maintenance; German version EN 12385-3:2004/+A1:2008 (13) /FABERG co-author/ 01.09 Steel wire ropes - Safety - Part 3: Information for use and maintenance; German version EN 12385-3:2004/+A1:2008, Corrigendem to DIN EN 12385.3:2008-06 /FABERG co-author/ 05.04 Steel wire ropes - Safety - Part 6: Stranded ropes for mine shafts; German version EN 12385- 6:2004 (12) 02.03 Steel wire ropes - Safety - Part 7: Locked coil ropes for mine shafts; German version EN 12835-7:2002 (9) 10.07 Lubricants and impregnating compounds for friction hoist ropes in mining Safety requirements and testing (9) DIN EN 12385-3 DIN 12385-3/B1 DIN EN 12385-6 DIN EN 12385-7 DIN 21258 NA 008-01-02-02 AK Hanging gears DIN 21341 DIN 21346 DIN 21371 DIN 21376-1 08.86 Wooden mine guides (6) 11.89 Square head bolts for shaft guides (5) 01.88 Rope attachments; assemblies (5) 07.88 Guide shoes for shaft conveyances and counterweights with guide rollers in mining (5) FABERG Normenausschuss Bergbau Page 4 of 45 90 Control units of winding engines. pins (5) 01.88 Rope attachments.88 Rope attachments. for shafts and drifts.94 Winding rope pulleys for round ropes (10) FABERG Normenausschuss Bergbau Page 5 of 45 . thimble connection plates for round ropes (5) 01.90 Knuckle threads for the mining. inner plates (5) 01.86 Low speed Koepe winding machines with friction wheel.88 Rope attachments. clamp thimbles (5) 02.94 Steel railings for shaft conveyances in mining (5) 01.88 Rope attachments. hoists and winches for mining (5) 05.88 Rope attachments. braking system calculation formulae (13) 05.85 Thimbles for flat ropes (5) NA 008-01-02-03 AK Braking calculations DIN 20400 DIN 22400 DIN 22405 DIN 22406 DIN 22410 01. threads with large load-bearing depth (6) 04.88 Guide shoes for shaft conveyances and counterweights with slide-ways in mining (5) 12. thimbles for round ropes (5) 01.Register of Mining Standards 2010-12 DIN 21376-2 DIN 21377 DIN 21381 DIN 21382 DIN 21383 DIN 21386 DIN 21388 DIN 21389 DIN 21390 FB Shaft 01 07. universal joints (5) 01.88 Rope attachments. outer plates.90 Friction pulley linings for winches and winders in mining (5) 10. 03 Mine support .Part 1: General (5) 05.89 Round pit timber.87 Round pit timber.Part 1: Support units and general requirements.87 Mine support.03 Mine support .89 Sawn pit timber. boards and planks (5) 02. arches B 21.90 Arch supports.10 Machines for underground mines . graphical symbols for the open loop control of powered support (6) 02.86 Mine support.87 Round pit timber. pillar.88 Mine supports.90 Mine support. square timber (5) 06.87 Cut pit timber.Safety requirements for hydraulic powered roof supports . technical quality and delivery requirements (6) 06.Register of Mining Standards 2010-12 FB Mine Support 02 02 Mine Support NA 008-02-01 AA Strut support DIN 21315 DIN 21316 DIN 21317 DIN 21318 DIN 21320 DIN 21321 DIN 21324 DIN 21328 DIN 21546 DIN 21549 DIN 21550 DIN 21551 DIN 21555 DIN 21556 DIN 21557 DIN 21561 03.Part 4: Testing (10) 05. terminology (5) 05.89 Sawn pit timber.87 Round pit timber. marking (3) 03. connecting dimensions (5) NA 008-02-02 AA Hydraulic powered roof support DIN EN 1804-1 05. load bearing capacity of props and bars. identification code (5) 09. 7 to B 63 (5) 01.10 Machines for underground mines . head for single props. requirements (5) 01.87 Cut pit timber. identification code (5) 02.03 Mine support .90 Arch supports. designation and statical values (21) 05.Part 3: Requirements (10) 05. 2 (5) 07. planks and square-sawn timber for working platforms (5) 06.Safety requirements for hydraulic powered roof supports .10 Machines for underground mines .Part 3: Hydraulic control systems.88 Mine support. wood for cogs (5) 06. strut support. roof bars for single props. arches B 5.87 Cut pit timber. technical terms of delivery and quality (5) 06. bolts (5) 04. supports (5) 06.86 Mine support.89 Round pit timber.Part 5: Marking of parts of mine support (6) 07. German version EN 18043:2006+A1:2010 (15) DIN EN 1804-2 DIN EN 1804-3 NA 008-02-03 AA Roadway support DIN 21319 DIN 21326 DIN 21327 DIN 21329 E BB 21510 DIN 21530-1 DIN 21530-2 DIN 21530-3 DIN 21530-4 DIN 21530-5 DIN 21531-1 DIN 21531-2 DIN 21548 02. English version EN 1804-1:2001+A1:2010 (16) 05. timber for lagging (5) 02. props. roof bars single props. powered walking supports. yield valves for powered support. bars (5) 06. testing. 4 to B 20.03 Mine support .03 Mine support .87 Cut pit timber.Part 2: Power set and rams.91 Mine support.87 Mine support.95 Verzugsmatten .89 Rails for mine supports (5) FABERG Normenausschuss Bergbau Page 6 of 45 .Technische Anforderungen (2) 05. German version EN 18042:2001+A1:2010 (16) 05.Safety requirements for hydraulic roof supports . lengths (5) 08. calculation (5) 06. valves for individual props.Part 2: Dimensions. boards.89 Round pit timber. slabs (5) 08. Register of Mining Standards 2010-12 NA 008-02-03-01 AK Bolts for mine support DIN 21521-1 DIN 21521-2 DIN 21522 07. tests. terms (6) FB Mine Support 02 02.72 Roof bolt plates for mining and tunnel support (4) FABERG Normenausschuss Bergbau Page 7 of 45 .93 Rock bolts for mining and tunnel support. testing methods (7) 07. general specifications for steel-bolts.90 Rock bolts for mining and tunnelling. signs for gears (4) /FABERG co-author/ 03.89 Pneumatic stowing pipes (5) 04.Mobile extracting machines at the face .68 Gears for coal ploughs and underground chain.03 Underground mining machines .75 Protective clothing .General requirements. German version prEN 340:2000 (4) /FABERG co-author/ DIN 20012 DIN 20013 DIN 20097 DIN 20350 FABERG Normenausschuss Bergbau Page 8 of 45 .Register of Mining Standards 2010-12 FB Extraction 03 03 Extraction NA 008-03-01 AA Extracting and stowing DIN EN 1552 09.conveyors. German version EN 1552:2003 (10) /FABERG co-author/ 04.89 Sealings for pneumatic stowing pipes (5) 07.Safety requirements for shearer loaders and plough systems. 90 Pick eyes. round picks with shank (5) Page 9 of 45 DIN 1197-1 DIN 1197-2 DIN 6436 DIN 6437-1 DIN 6437-2 DIN 20109 DIN 20110 DIN 20112 DIN 20115 DIN 20119 DIN 20120 DIN 20121 DIN 20123 DIN 20124 DIN 20125 DIN 20127 DIN 20128 DIN 20129 DIN 20135 DIN 20136 DIN 20142 DIN 20151 DIN 20152 DIN 20301 DIN 20302 DIN 20311 DIN 20314 DIN 20361 DIN 20367 DIN 20369 DIN 20371 DIN 20372 DIN 20374 DIN 20375 DIN 20376 FABERG Normenausschuss Bergbau . design (4) 04. requirements. flat.90 Screw threads for drill tubes will diameters exceeding 100 mm for large hole boring in mining (5) 04.Safety requirements.Terminology.88 Pick hammers. signs for gears (4) /FABERG co-author/ 03.90 Digging shovel (5) 07. oval.10 Rock drilling . dimensions.02 Drill tubes with diameters exceeding 100 mm for large hole boring in mining (5) 06.90 Shallow rimmed shovel (5) 07.88 Rock drilling.99 Rock drilling operations .92 Hacksaws with steel frames and two handles (5) 01.90 Loading shovel (5) 06. testing (5) 06. types. testing. dimensions.10 Rock drilling .conveyors.90 Rimmed shovel (5) 07.90 Miners axes (5) 07.and shearpick without and with shank (5) 09. connecting tap for hammer drilling support (4) /FABERG coauthor/ 05. gauges for picks (5) 01. dimensions. units.90 Pickaxe handles.Chuck bushings .90 Hand hammer (5) 07. connecting dimensions.74 Rock drilling operations . and symbols for use in formulae (9) 02. German version EN 815:1996+A2:2008 (16) /FABERG co-author/ 06.89 Shovel and spade handels.Connecting dimensions. plug gauges (5) 06. water tube.88 Pick hammers.69 Hammer drilling.90 Pan shovel (5) 07.90 Sledge hammer (5) 07.90 Eyes for picks. finish (5) 01. oval.Round screw connections for rotary drilling equipment Dimensions. and symbols for use in formulae (8) /FABERG co-author/ 11.90 Sand shovel (5) 07. marking (5) /FABERG co-author/ 01. chisel and point ends (5) 06. material.Terminology. units. gauges (5) 06.90 In triangular hand hoes (5) 06.90 Pickaxes (5) 06.09 Safety of unshielded tunnel boring machines and rodles shaft boring machines for rock .Register of Mining Standards 2010-12 FB Tools 04 04 Tools NA 008-04-01 AA Hand tools/Rock drilling DIN EN 815 12.89 Pick hammers. round picks without shank (5) 01.90 Pickaxe handles. design (5) 09.73 Spades (4) /FABERG co-author/ 07.84 Gears for coal ploughs and underground chain.88 Pick hammers.90 Pickaxes. testing (5) 06.90 Trough shovel (5) 07.90 Beater-pickaxes (5) 06. requirements.90 Plain shovel (5) 07. material. requirements. safety requirements (4) /FABERG co-author/ 01. technical specifications (5) /FABERG co-author/ FABERG Normenausschuss Bergbau Page 10 of 45 .Part 1: Tapered bits for percussive flush drilling 02.Part 2: Bits with internal thread for percussive flush drlling 01.10 Rock drilling .90 Drill bits with tapered connection for percussive wet rock drilling (5) 02. terms.09 Rock drilling .89 Timber handles for impact tools.10 Rock drilling .90 Drilling hammers.Flush drills . shanks and tapers (7) FB Tools 04 10.80 Operating elements (control devices) for pneumatic tools. taper gauges for tapered connections of drill rods and bits (5) 03.Register of Mining Standards 2010-12 DIN 20377 DIN 20378 DIN 20379 E DIN 20379-1 E DIN 20379-2 DIN 24063 DIN 68340 11.Drill rod profiles. 20 m radius.88 Simple crossovers for underground tracks.Steel types (10) /FABERG co-author/ 11. 1 : 6 inclination. 1 : 5 inclination. 30 m radius. 600 mm gauge (5) FABERG Normenausschuss Bergbau Page 11 of 45 . 600 mm gauge (5) 10. 1 : 6 inclination. 1 : 5 inclination.88 Check rail device for simple underground track points.88 Simple underground track points. 600 mm gauge.88 Simple underground track points.88 Crossings for simple underground track points. steel types (6) /FABERG co-author/ 03. 30 m radius. terminology (7) 10. 600 mm gauge (5) 10. 30 m radius.88 Simple underground track points. 600 mm gauge. 30 m radius. 20 m radius. geometric dimensions (5) 10. 1 : 5 inclination.88 Points and crossovers for rail haulage roads in mines. geometric dimensions (5) 10. compilation (5) 10. 1 : 7 inclination. compilation (5) 10. standard types.Dimensions. 600 mm gauge (5) 10. 30 m radius. 1 : 5 inclination.88 Crossings for simple underground track points. 600 mm gauge (5) 10. geometric dimensions (5) 10. 600 mm gauge (5) 10. 30 m radius. static values. 20 m radius.65 baseplate scrwes with rectangular head (4) /FABERG co-author/ 10. 50 m radius.Register of Mining Standards 2010-12 FB Transport 05 05 Transport NA 008-05-01 AA Mine railways DIN 5902 DIN 5904 DIN 5906 DIN 5914 DIN 20449 DIN 20450 DIN 20452-1 DIN 20452-2 DIN 20453-1 DIN 20453-2 DIN 20454 DIN 20455 DIN 20458 DIN 20460 DIN 20462-1 DIN 20462-2 DIN 20463-1 DIN 20463-2 DIN 20464 DIN 20465 DIN 20468 DIN 20470 DIN 20472-1 DIN 20472-2 DIN 20473-1 11. 1 : 5 inclination.88 Switches for simple underground track points with loose heel switch. steel types (6) /FABERG co-author/ 11. 600 mm gauge (5) 10. 30 m radius.95 Fishplates for grooveless flat bottom rails dimensions .88 Check rail device for simple underground track points.88 Simple points for underground tracks with spring switch blade. compilation (5) 10. 20 m radius. 1 : 5 inclination. compilation (5) 10. 600 mm gauge (5) 10.88 Simple points for underground tracks with spring switch blade. 1 : 6 inclination.Dimensions. compilation (5) 10. 600 mm gauge. 600 mm gauge.88 Simple crossovers for underground tracks.88 Switches for simple underground track points with spring switch blade. 1 : 7 inclination. 1 : 5 inclination.88 Switches for simple underground track points with loose heel switch. 50 m radius. geometric dimensions (5) 10. 1 : 6 inclination. 600 mm gauge (5) 10. 1 : 7 inclination. 600 mm gauge. 50 m radius.88 Switches for simple underground track points with loose heel switch. 1 : 6 inclination. 1 : 7 inclination. 1 : 6 inclination. 30 m radius. 20 m radius. 20 m radius.88 Simple points for underground tracks with loose heel switch. 1 : 6 inclination.88 Switches for simple underground track points with spring switch blade.95 Short clips for grooveless flat bottom rails . 20 m radius.88 Simple points for underground tracks with spring switch blade. 1 : 5 inclination. 20 m radius. geometric dimensions (5) 10. 600 mm gauge.88 Simple points for underground tracks with loose heel switch.95 Steel sleepers .88 Simple points for underground tracks with loose heel switch. 50 m radius. compilation (5) 10. 1 : 6 inclination. standard types and selection (5) 07.front wall.92 Switches for simple track points.10 Pit converted timber. dimensions.88 Small size lubs. rules for measuring (5) 11. casing.10 Wheel sets with taper roller bearings for mine cars.Part 1: Requirements (6) 07. exterior spring suspension (11) 07. 900 mm gauge (6) 03. 1 : 7 inclination.Shackle coupling (5) 05. timber sleepers (5) 08.07 Mine railways . rails S 30. 120 m radius. without springs (7) 08. 1:9 inclination. buffer sheet (5) 08.Passenger cars for underground mining . dimensions.90 Mine cars size small. exterior spring suspension (7) 08.front wall. geometric dimensions (5) 01. timber sleepers (5) FABERG Normenausschuss Bergbau Page 12 of 45 . large size. 600 mm gauge (5) 10. 50 m radius.89 Wheel sets with taper roller bearings for mine cars. tyres for mine locomotives (5) 02. compilation (6) 03. 1 : 7 inclination. main dimensions.07 Rail haulage roads in mines .10 Mine cars . track gauges and rails.89 Pit converted timber.91 Mine cars. casing. 600 mm gauge (5) 10.88 Check rail device for simple underground track points. 1 : 7 inclination.88 Simple crossovers for underground tracks. 900 mm gauge (5) 07.89 Mine cars. frame.92 Simple track points with spring switch blade. design (5) 07.88 Crossings for simple underground track points. 1 : 7 inclination.10 Wheel sets with taper roller bearings for mine cars. 1:9 inclination. supporting beam (5) 07. 1:9 inclination. butt strap Fl 30 (5) 07.Wheel profils for locomotives and cars (5) 05.91 Rail fastenings in mining for S 30 and S 33 rails on wooden sleepers (7) 08. interior spring suspension (9) 07. without springs (8) 07. components. design and construction (5) 10.88 Pit railways.10 Rail fastenings in mining for S 30E1 and 33E1 rails on wooden sleepers (8) 01.10 Wheel sets with taper roller bearings for mine cars.95 Mine cars . 50 m radius.Register of Mining Standards 2010-12 DIN 20473-2 DIN 20474 DIN 20475 DIN 20478 DIN 20499 DIN 20500 DIN 20501 DIN 20506 DIN 20536 DIN 20537 DIN 20539 DIN 20548 DIN 20549 DIN 20550 DIN 20551 E DIN 20551 DIN 20552 DIN 20553 E DIN 20553 DIN 20555 E DIN 20555 DIN 20556 E DIN 20556 DIN 20560 DIN 20570 DIN 20575-1 DIN 20579-1 DIN 20579-2 DIN 20581 DIN 20583 DIN 20586 E DIN 20586 DIN 20600 DIN 20601 DIN 21325 E DIN 21325 FB Transport 05 10. definition and tolerances (5) 07.03 Rail transport .90 Wheel sets for rail vehicles used in mines.General rules (12) 10.89 Wheel sets with taper roller bearings for mine cars. 50 m radius.90 Mine cars . design and construction (5) 04.88 Mine cars. requirements (5) 03.92 Check rail device for simple track points. bumpers. strap type coupling (5) 11. frame.90 Clamping plates for securing rails onto steel supports (5) 01. 120 m radius.86 Track gauges for pit railways.89 Mine cars. interior spring suspension (7) 08.86 Buffer springs for mine cars. 50 m radius.88 Underground mine railways. 900 mm gauge.88 Switches for simple underground track points with spring switch blade. buffer sheet (10) 11.86 Buffer springs for mine cars. calculation (5) 07.89 Wheel sets with taper roller bearings for mine cars. 600 mm gauge (5) 10. 120 m radius. middle size. rope positions.02 Monorails for mining . toothed disc (5) 08.Suspensions shackles (6) 06.Part 2: Monorails.01 Suspended monorails for mining .Mounting regulations .01 Monorails for mining . mounting devices.93 Suspended monorails for mining. structure and terms (6) 11. German version EN ISO:2007 (8) /FABERG co-author/ FABERG Normenausschuss Bergbau Page 13 of 45 .Rails . enveloping surface method.Test methods (ISO 252:2007).90 Securing devices on underframes used in mining (5) 08.Ply adhesion between constitutive eleents .91 Suspended monorails for mining. enveloping surface method.91 Suspension claws for mining. enveloping surface method. enveloping surface method.Rails .86 Measurement of airborne noise emitted by machines. bolted couplings for rope-hauled and self-propelled rail installations.Register of Mining Standards 2010-12 DIN 45635-52 DIN 45635-53 DIN 45635-54 DIN 45635-55 FB Transport 05 05.91 Suspended monorails for mining.94 Force-guided tram-ways in mining .93 Suspended monorails for mining.01 Monorails for mining .02 Monorails for mining .07 Monorails for minging . mine diesel locomotives and mine road railers (5) /FABERG co-author/ 05.Part 2: Curved rails and adapting rails for profile I 140 E (8) 07.94 Force-guided tram-ways in mining .Permissible loads for suspensions and their abnutments and railprofile I 140 E (10) 03.94 Force-guided tram-ways in mining .Tested. dimensions and requirements (6) 10. clearance dimensions for bogies (5) 08.wheel and/or gearwheel drive (5) /FABERG co-author/ NA 008-05-02 AA Suspended monorails DIN 20590 DIN 20592-1 DIN 20592-2 DIN 20593-1 DIN 20593-2 DIN 20593-3 DIN 20593-4 DIN 20594 DIN 20597 DIN 20599 DIN 20619 DIN 20620-1 DIN 20620-2 DIN 20620-3 DIN 20622 DIN 20625-1 DIN 20629-1 DIN 20629-2 DIN 20629-3 DIN 20633 DIN 20635 DIN 20636 DIN 20637 04. attachment facilities for transport boxes.01 Suspended monorails for mining .Part 4: Curved rails and adapting rails for profiles I 140 V and I 250 (12) 08.Part 1: Survey.Part 1: Straight rails for profile I 140 E (7) 11.86 Measurement of airborne noise emitted by machines.04 Monorails for minging .02 Suspended-monorail transport systems for mining . bolted coupling 30 (7) 08.Part 3: Straight rails and rail-connections for profiles I 140V and I 250 (11) 04. for loads up to 30 kN. diesel traction trolleys (5) /FABERG co-author/ 05. transport boxes.86 Measurement of airborne noise emitted by machines. shunting trolleys with friction. dimensions and requirements (5) 08.Rails . structure and terms (6) 10.Part 3: Free-steered machines. mine trackless vehicles (5) /FABERG co-author/ 05.02 Overhead monorail installations for mining . long link (5) NA 008-05-03 AA Belt conveyors DIN EN ISO 252 01.Mounting regulations .97 Monorails for mining .86 Measurement of airborne noise emitted by machines.Mounting regulations . dimensions and requirements (5) 11.Suspension claws .92 Capture-track rail installations in mining.Part 1: for cabledriven suspended monorails (7) 08.Requirements and testing (5) 10.Part 2: for loco-driven suspended monorails (8) 08. winding-drum with suspension hook.Part 3: Calculations (5) 04.Double-end fork turnbuckles (7) 05. structure and terms (5) 10.Tested round steel chains for suspensions . requirements and testing (7) 05.Rails .08 Conveyor belts .92 Suspended monorails for mining.01 Suspended monorails for mining . Test method (ISO 283:2007). German version EN ISO 340:2004.Electrical conductivity .05 Conveyor belts .Static test method (ISO 1120:2002).Part 1: Measurement of elongation (ISO 7622-1:1984). Corrigendum to DIN EN ISO 340:2007-06 (99) /FABERG co-author/ 04.08 Conveyor belts with a textile carcass . German Version EN ISO 284:2003 (8) /FABERG co-author/ 06.Part 2: Large scale fire test.10 Conveyor belts . elongation at break and elongation at the reference load .08 Conveyor belts .Requirements and test method (ISO 340:2004). German version EN ISO 14890:2003 (12) /FABERG co-author/ 12.Electrical and flammability safety requirements. German version EN ISO 7622-1:1995 (5) /FABERG co-author/ 11.Initial test and after thermal treatment (ISO 7623:1996).Laboratory scale flammability characteristics .04 Conveyor belts .Transverse flexibility (troughability) .02 Conveyor belts .10 Conveyor belts for general purpose use .Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:1999).Specification and method of test (ISO 284:2003).95 Steel cord conveyor belts .Full thickness tensile strength.07 Conveyor belts .Fire simulation flammability testing .Determination of strength of mechanical fastenings .99 Conveyor belts .09 Conveyor belts for use in underground installations .Longitudinal traction test .Determination of the lateral and vertical displacement of steel cords. German version EN 12881-2:2005+A1:2008 (8) /FABERG co-author/ 03.04 Conveyor belts .Main dimensions of idlers for belt conveyors for bulk material (5) /FABERG co-author/ Page 14 of 45 DIN EN ISO 284 DIN EN ISO 340 DIN EN ISO 340/B1 DIN EN ISO 505 DIN EN ISO 583 DIN EN ISO 703 DIN EN ISO 1120 DIN EN 1554 DIN EN ISO 7590 DIN EN ISO 7622-1 DIN EN ISO 7622-2 DIN EN ISO 7623 DIN EN ISO 9856 DIN EN 12881-1 DIN EN 12881-2 DIN EN 12882 DIN EN 13827 DIN EN ISO 14890 DIN EN 14973 DIN 15207-1 FABERG Normenausschuss Bergbau . German version EN 12881-1:2005+A1:2008 (14) /FABERG co-author/ 10. German version EN 13827:2003 (7) /FABERG coauthor/ 11.Fire simulation flammability testing .95 Steel cord conveyor belts .Laboratory scale flammability characteristics . German version EN 12882:2008 (11) /FABERG co-author/ 07.Cord-to-coating bond test .Part 2: Measurement of tensile strength (ISO 7622-2:1984).09 Conveyor belts .97 Steel cord conveyor belts .Part 1: Propane burner tests. German version EN ISO 7622-2:1995 (6) /FABERG co-author/ 08. German version EN ISO 283:2007 (9) /FABERG co-author/ 04.00 Continuous mechanical handling equipment .Method of test (ISO 583:2007).00 Conveyor belts . German version EN ISO 1120:2002 (7) /FABERG coauthor/ 01. German version EN ISO 505:1999 (6) /FABERG co-author/ 03. German version EN ISO 9856:2003 (8) /FABERG co-author/ 01.Drum friction testing.08 Textile conveyor belts . German version EN ISO 7590:2001 (8) /FABERG co-author/ 11.Register of Mining Standards 2010-12 DIN EN ISO 283 FB Transport 05 02.Methods for the determination of total thickness and cover thickness (ISO 7590:2001).04 Steel cord conveyor belts . German version EN ISO 703:2007 (8) /FABERG co-author/ 06. German version EN 14973:2006+A1:2008 (11) /FABERG co-author/ 10.09 Conveyor belts . German version EN ISO 340:2004 (8) /FABERG co-author/ 09.Specification for rubberor plastics covered conveyor belts of textile construction for general use (ISO 14890:2003).10 Steel cord conveyor belts .Requirements and test method (ISO 340:2004). German version EN 1554:1998 (6) /FABERG co-author/ 03.Electrical and flammability safety requirements.Idlers for belt conveyors .Total belt thickness and thickness of constitutive elements .Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003). German version EN ISO 7623:1997 (6) /FABERG co-author/ 07.Longitudinal traction test .Test method (ISO 703:2007). German version EN ISO 583:2007 (9) /FABERG co-author/ 03. Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2004).Part 3: Determination of time strength for conveyor belt joints (dynamical testing method) (8) 02. requrements. German version EN ISO 15236-1:2005 (12) /FABERG co-author/ 09.Part 1: Monoply belts for underground applications. marking (5) 02. German version EN ISO 15236-2:2004 (8) /FABERG co-author/ 04.02 Continuous conveyors . principal dimensions (5) /FABERG co-author/ 07. dimensions.Register of Mining Standards 2010-12 DIN EN ISO 15236-1 FB Transport 05 04.00 Conveyor belts with textile plies for coalmining . marking (5) 11. requirements (6) 07. dimensions and mechanical requirements for conveyor belts for general use (ISO 15236-1:2005).Basis for calculation and dimensioning (17) 02.Part 3: Permanent joints (6) /FABERG co-author/ 08. testing (6) 02. requirements.03 Conveyor belts with textile plies for coalmining .Part 2: Rubber-belts with two plies for underground applications. requirements (6) 02.88 Conveyor belts with textile plies for coalmining. testing (6) 11.04 Steel cord conveyor belts .88 Steelcord conveyor belts for hoisting and conveying. dimensions. determination of running time of belt joints at conveyor belts with textile plies (5) 11.Belt conveyors for loose bulk materials .10 Continuous conveyors .Part 2: Preferred belt types (ISO 15236-2:2004).04 Steel cord conveyor belts .91 Steelcord conveyor belts for use in underground coal mining. idler sets for belt conveyors for loose bulk materials. marking (6) 10.03 Continous mechanical handling equipment .88 Conveyor belts for coalmining.Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2007).Part 1: Design. dimensions.Belt conveyors for loose bulk materials . German version EN ISO 15236-4:2004 (8) /FABERG co-author/ 03.05 Textile conveyor belts .88 Steelcord conveyor belts for hoisting and conveying. branding (5) 12.08 Steel cord conveyor belts . belt joints.88 Steelcord conveyor belts for underground coalmining. testing (5) DIN EN ISO 15236-2 DIN EN ISO 15236-3 DIN EN ISO 15236-4 DIN EN ISO 16851 DIN 22101 E DIN 22101 DIN 22102-1 DIN 22102-2 DIN 22102-3 DIN 22107 DIN 22109-1 DIN 22109-2 DIN 22109-4 DIN 22109-5 DIN 22109-6 DIN 22110-2 DIN 22110-3 DIN 22117 DIN 22121 DIN 22122 DIN 22129-1 DIN 22129-2 DIN 22129-3 DIN 22129-4 DIN 22131-2 DIN 22131-3 FABERG Normenausschuss Bergbau Page 15 of 45 . dimensions. marking (7) /FABERG co-author/ 04.Permanent joints for belts with one or two plies.88 Steel cord conveyor belts for underground coalmining.91 Conveyor belts with textile plies for bulk goods .97 Testing methods for conveyor belt joints .00 Conveyor belts with textile plies for coalmining .84 Continous mechanical handling equipment.Part 2: Testing (5) /FABERG coauthor/ 04.88 Steelcord conveyor belts for underground coalmining.Part 4: Vulcanized belt joints (ISO 15236-4:2004).Part 1: Dimensions. requirements (6) 02. German version EN ISO 15236-3:2007 (11) /FABERG co-author/ 09. specifications.Part 4: Rubber-belts with two plies for above ground applications. German version EN ISO 16851:2004 (7) /FABERG co-author/ 08. requirements (6) 11. requirements (6) 07. dimensions.91 Conveyor belts with textile plies for bulk goods .Basis for calculation and dimensioning (20) 04.Part 6: Testing (6) 10. dimensions.07 Testing methods for conveyor belt joints .00 Conveyor belts with textile plies for coalmining . determination of the oxygen index (6) 07.Troughability of conveyor belts Determination of that portion of width of conveyor belting in contact with idlers.06 Steel cord conveyor belts .91 Conveyor belts with textile plies for bulk goods .Part 2: Endurance running tests.00 Conveyor belts with textile plies for coalmining . 10 Belt conveyors for underground coal mining . adhesion strength test of the cover to the core layer (ISO 8094:1984).Part 3: Block type connectors (10) FABERG Normenausschuss Bergbau Page 16 of 45 . dimensions.10 Conveyor belts .Part 1: Dimensions (6) 12.80 Conveyor chains.Pressure rollers DN 159 Dimensions.01 Round steel link chains for conveyors and winning equipment in mining (9) 04.09 Underground mining machinery .Part 1: Flat type connectors (9) 08.72 Schmiernippel für den Bergbau (2) 09. heavy type (4) /FABERG co-author/ 01.90 Scraper bars for chain conveyors.Part 2: Requirements (5) 03. German version EN 28094:1994 (5) /FABERG co-author/ 02. non-calibrated.or plastics-covered conveyor belts of textile construction for underground mining (ISO 22721:2007).96 Belt conveyors for underground coalmining .Heavy construction (12) 12. requirements.Part 1: Flat type connectors . principal dimensions (5) /FABERG co-author/ 12.02 Chain sprockets for chain conveyors and coal winning equipment .Idlers .10 Flat link chains for use in continuous conveyors in mining (12) 10. testing (11) 06.10 Round steel link chains for use in continuous conveyors and winning equipment in mining (11) 03.Part 2: Requirements (5) 03. testing (12) 08.10 Belt conveyors for underground coal mining .10 Chain connectors .03 Chain connectors .03 Corrigenda to DIN 22114:2001-12 12.90 Tested. bush conveyor chains.Specification for rubber.07 Belt conveyors for underground coal mining .Dimensions.Specification for the safety requirements for armoured face conveyors. marking (6) 04.Part 2: Kenter type connectors (9) 08.Inactive for new design (10) 08.80 Conveyor chains. testing (5) 04.10 Belt conveyors for underground coalmining .94 Continous mechanical handling equipment. requirements. Requirements and testing (7) 10. requirements.Register of Mining Standards 2010-12 DIN EN ISO 22721 FB Transport 05 01. outboard chain assembly.10 Chain connectors .Heavy construction (8) 10.96 Belt conveyors for underground coalmining .Dimensions.Part 3: Block type connectors (8) 08.94 Steel cord conveyor belts. Coating on idlers.81 Testing of organic materials.05 Elastomere scraper plates for belt conveyors in hard coal mines (6) NA 008-05-05 AA Components for chain conveyors DIN 763 DIN 8175 DIN 8176 DIN EN 12321 DIN 22200 BB 22249 DIN 22252 E DIN 22252 DIN 22253 DIN 22255 E DIN 22255 DIN 22256 DIN 22257 DIN 22258-1 E DIN 22258-1 DIN 22258-2 DIN 22258-3 E DIN 22258-3 12. German version EN 12321:2003+A1:2009 (12) 05. long-link round steel chains (5) /FABERG co-author/ 02.Idlers . requirements.Shackle type connector units .Part 3: Testing (7) 12. bush conveyor chains for haulage systems (4) /FABERG coauthor/ 07. German version EN ISO 22721:2007 (11) /FABERG co-author/ 05.08 Chain connectors .Idlers . Separation test on fabric plies bonded together (5) /FABERG co-author/ DIN EN 28094 DIN 53530 NA 008-05-04 AA Constructions for belt conveyors DIN 22111 DIN 22112-1 DIN 22112-2 DIN 22112-2 DIN 22112-3 DIN 22114 DIN 22114/B1 DIN 22114 DIN 22115 DIN 22116 DIN 22120 11.01 Belt conveyors for underground coalmining .Light construction (11) 12.03 Chain connectors .03 Belt conveyors for underground coal mining .03 Chain connectors . idler sets for belt conveyors for loose bulk materials.03 Belt conveyors for underground coalmining.01 Flat link chains for use in continuous conveyors in mining (9) 08.Idlers . 01 Watervalve.03 Textile-reinforced hoses .Determination of adhesion between components (ISO 8033:2006). German version EN ISO 1402:2009 (10) /FABERG co-author/ 06. German version EN ISO 8033:2006 (10) /FABERG co-author/ 02. fittings with loose flanges and plain collars. German version EN ISO 7751:1997 (5) /FABERG co-author/ 02.Method of test for flammability (ISO 8030:1995). nominal pressure 6 (7) 09.10 Rubber and plastics hoses and hose assemblies .07 Flightbars for use in chain conveyors in mining (10) FB Transport 05 NA 008-05-06 AA Pipe systems DIN 20002-1 DIN 20002-2 DIN 20002-3 DIN 20003-1 DIN 20003-2 DIN 20003-3 DIN 20004-1 DIN 20004-2 DIN 20006 DIN 20042 BB 20065-1 BB 20065-2 DIN 24251 11.Part 1: Maximal working pressure PN 10/16 (7) Page 17 of 45 DIN EN 857 DIN EN ISO 1402 DIN EN ISO 7751 DIN EN ISO 8030 DIN EN ISO 8031 DIN EN ISO 8033 DIN EN ISO 8330 DIN 20018-1 FABERG Normenausschuss Bergbau . steel tubes with loose flanges and plain collars.Part 2: Wedge rings rated for PN 10 and PN 40 (5) 09. German version EN 853:1996 (7) /FABERG co-author/ 02.Richtlinien für die Verlegung .Mitgeltende Normen (2) 08.Wire braid reinforced hydraulic type Specification. fittings with loose flanges and plain collars.89 Pipelines for mining. German version prEN ISO 8330:2007 (14) /FABERG co-author/ 04. projection and recess. nominal pressure 10 (5) 11. German version EN 854:1996 (7) /FABERG co-author/ 02.Determination of electrical resistance and electrical conductivity (ISO 8031:2009). mine drainage pumps. with pump total head up to 1000 m at speed of rotation 1500 l/min (4) /FABERG co-author/ NA 008-05-07 AA Hose assemblies DIN EN 853 DIN EN 854 DIN EN 856 02. German version EN 857:1996 (6) /FABERG co-author/ 04. nominal pressure 10 (7) 09. nominal pressure 6 (5) 11.97 Rubber hoses and hose assemblies . German version EN ISO 8031:2009 (12) /FABERG co-author/ 11.Ratios of proof and burst pressure to design working pressure (ISO 7751:1991).Specification.10 Rubber and plastic hoses and hose assemblies .78 Kunststoff-Rohrleitungen . nominal pressure 40 . sealings for steel tubes according to DIN 20002 and fittings according to DIN 20003 (5) 08.06 Rubber and plastics hoses . German version EN 856:1996 (7) /FABERG coauthor/ 02.89 Pipeline for mining.97 Rubber hoses and hose assemblies .97 Rubber hoses and hose assemblies .87 Steel tubes for mining.Vocabulary (ISO 8330:2007). nominal pressure 40 (5) 09.97 Rubber hoses and hose assemblies .Rubber-covered spiral wire reinforced hydraulic type . German version EN ISO 8030:1997 (6) /FABERG co-author/ 04.73 Multistage centrifugal pumps.Thermoplastische Kunststoffe (2) 02. steel tubes with loose flanges and collars.00 Steel tubes for mining .97 Rubber and plastics hoses and hose assemblies . fittings with loose flanges and plain collars.87 Steel tubes for mining.Dimensions and requirements (5) 02.89 Pipelines for mining.Textile reinforced hydraulic type Specification.Richtlinien für die Verlegung .Wire braid reinforced compact type for hydraulic applications .Hydrostatic testing (ISO 1402:2009).87 Steel tubes for mining.78 Kunststoff-Rohrleitungen . projection and recess.Register of Mining Standards 2010-12 DIN 22259 05. steel tubes with loose flanges and plain collars.98 Rubber and plastics hoses . nominal pressure 40 (6) 12.89 Pipelines for mining.Specification.Part 1: Interpose rings rated for PN 10 and PN 40 (6) 12.00 Steel tubes for mining .10 Rubber and plastics hoses and hose assemblies . 90 Hose fittings.Part 1: Rubber tyred vehicles.90 Hose fittings. requirements (12) /FABERG co-author/ NA 008-05-08 AA Mobile machines DIN EN 1889-1 11. requirements (5) 07.Register of Mining Standards 2010-12 DIN 20018-2 DIN 20018-3 DIN 20018-4 DIN 20021 DIN 20029 DIN 20030 DIN 20033 DIN 20035 DIN 20036 DIN 20037 DIN 20038 DIN 20039 DIN 20040 DIN 20043 DIN 20044 DIN 20066 E DIN 20066 FB Transport 05 04.Part 2: Rail locomotives. test methods suggestion for the configuration of documents (11) /FABERG co-author/ 10. German version EN 1889-2:2003+A1:2009 (20) 05.Part 4: Testing (6) 02.Completation for DIN EN 853 to DIN EN 857 (5) 10.03 Machines for underground mines . dimensions (5) 10.03 Textile-reinforced hoses . nominal pressure 16 (5) 10. connecting nipple. German version EN 1889-1:2003 (15) /FABERG co-author/ 07.Road headers. safety .Part 3: Maximal working pressure PN 100 (5) 04.Part 2: Maximal working pressure PN 40 (5) 04.98 Hose fittings . straight-way-cock with grip. nominal pressure 16 (5) 09.90 Hose fittings.Dimensions.90 Hose fittings.Mobile machines working underground Safety .Hose assemblies .90 Hose fittings.Hoses with layer . continuous miners and impact rippers Safety requirements.Hose clamps (5) 10. tapered nozzle with clamping nut (6) 10.09 Machines for underground mines .Mobile machines working underground. materials. flange nozzle. coupling nozzles (5) 08. German version EN 12111:2002+A1:2009 (16) /FABERG co-author/ DIN EN 1889-2 DIN EN 12111 FABERG Normenausschuss Bergbau Page 18 of 45 .97 Fluid-systems . 1:3 taper gauges (5) 06.92 Hose fittings. coupling nipples with round thread form (5) 10. requirements.90 Hose fittings. testing (7) 10.10 Hydraulic fluid power .10 Tunnelling machines .03 Staple-lock couplings type S for hydraulic power-transmission circuits Dimensions. nipple valves.90 Hose fittings.02 Hoses and hose assemblies.03 Textile-reinforced hoses .03 Staple-lock couplings for hydraulic power-transmission circuits (7) 05.03 Textile-reinforced hoses . dimensions. 10 Auxiliary ventilation in mining . one-wing type doors without pressure reduction (7) 02. wing air doors for haulage tracks.95 Air regulation systems in mining .Safety requirements.Air locks . double-wing type doors without pressure reduction (9) 03. wing air doors for haulage tracks.Cladding material for flexible airducts Requirements.10 Auxiliary ventilation for mining .09 Auxiliary ventilation for mining .Wing air doors for haulage tracks .Flat ventilation ducts (6) 07.09 Air regulation systems for mining .93 Air regulating systems in mining.10 Fans with electric motor drive intended for use in potentially explosive atmospheres in coal mines (6) Page 19 of 45 FABERG Normenausschuss Bergbau .09 Air regulating systems for mining .Doublewing type doors with pressure reduction (6) 09.09 Auxiliary ventilation for mining .Wing air doors for haulage tracks .Onewing type air doors without pressure reduction (11) 01.Sheet airducting with collars and loose flanges (5) 07. pneumatic cylinders for airdoors without pressure reduction.99 Air regulation systems in mining .Flexible plastic ventilation ducts for forced ventilation .99 Air regulation systems in mining . testing (5) 10.04 Corrigenda to DIN 21639:1999-09 10.09 Air regulating systems for mining .Wing air doors for haulage tracks .Doublewing type doors with pressure reduction (8) 05. marking (5) NA 008-06-02 AA Installations for auxiliary ventilation DIN 21603 DIN 21605 DIN 21606 DIN 21610 DIN 21612 DIN 21613 DIN 21614 DIN 21615 DIN 21625 10.Wing air doors for travelling tracks .Doublewing type doors without pressure reduction (12) 05. identifications.Travel-way air locks .99 Air regulation systems in mining .93 Air regulating systems in mining. requirement.Requirements and test methods (6) 07.98 Air regulation systems in mining . requirements and testing (12) 10.03 Air regulation systems in mining .09 Auxiliary ventilation for mining .Flexible plastic ventilation ducts for exhaust and forced ventilation .10 Auxiliary ventilation for mining .93 Air regulating systems in mining.Swinging roadway air doors for haulage tracks (10) 02.Flexible plastic air ducts . dimensions.Flanged sheet steel reducers (5) 10.Register of Mining Standards 2010-12 FB Ventilation 06 06 Ventilation NA 008-06-01 AA Air doors DIN EN 12110 DIN 21631 E DIN 21631 DIN 21632 E DIN 21632 DIN 21633 E DIN 21633 DIN 21634 E DIN 21634 DIN 21635 DIN 21636 DIN 21637 DIN 21638 DIN 21639 DIN 21639/B1 DIN 21640-1 02.09 Auxiliary ventilation for mining .Spiral ventilation ducts (6) 07.Wing air locks for travelling tracks .Building and operation (7) 04. wing air doors for travelling tracks.Air locks .Sheet steel reducers with flange and shoulder (5) 07.Steel sheet connectors with flange and shoulder (5) 10.Swinging roadway air doors for monorails and free steered machines .Type doors with pressure (5) 11.93 Air regulating systems in mining. German version EN 12110:2002+A1:2008 (12) /FABERG co-author/ 01.10 Tunnelling machines . air doors without pressure reduction (7) 02.09 Air regulating systems for mining .10 Auxiliary ventilation for mining .Dimensions.Building and operation (9) 08.One-wing type doors without pressure reduction (10) 10.Belt-conveyors-way air locks . Register of Mining Standards 2010-12 DIN 21626 FB Ventilation 06 07.10 Fans with hybrid (electric/pneumatic) motor drive intended for use in potentially explosive atmospheres in coal mines (6) FABERG Normenausschuss Bergbau Page 20 of 45 . Anchor devices.Protective footwear (ISO 20346:2004+AMD1:2007). connecting dimensions.09 Personal fall protection equipment .09 Personal protective equipment . German version EN 1497:2007 (10) /FABERG co-author/ 01. German version prEN 795:2009 (15) /FABERG co-author/ 10. German version EN ISO 20346:2004+AC:2007+A1:2007 (15) /FABERG co-author/ 05. German version prEN ISO 20346:2009 (16) /FABERG co-author/ 08. stepladders and guard-rails (ISO 14122-3:2001).Rescue harnesses.07 Personal protective equipment .02 Safety of machinery . steel fittings.Permanent means of access to machinery . with setting nut.07 Personal protective equipment . German version EN 1498:2006 (11) /FABERG co-author/ 04.07 Personal protective equipment .Permanent means of access to machinery .Occupational footwear (ISO 20347:2004).Anchor devices .02 Safety of machinery .09 Personal protective equipment .Anchor devices . noncalibrated (4) 11.10 Pulley for clothes hoists in pithead baths (5) 06. dimensions.Rescue loops. German version EN ISO 20347:2004+AC:2007+A1:2007 (15) /FABERG co-author/ Page 21 of 45 DIN EN 795 E DIN EN 795 DIN EN 1497 DIN EN 1498 DIN 5290-1 DIN 7472-2 DIN EN ISO 14122-1 DIN EN ISO 14122-2 DIN EN ISO 14122-3 DIN EN ISO 14122-4 DIN EN 14404 DIN 20180 DIN 20182 DIN EN ISO 20344 DIN EN ISO 20345 E DIN EN ISO 20345 DIN EN ISO 20346 E DIN EN ISO 20346 DIN EN ISO 20347/B1 DIN EN ISO 20347 FABERG Normenausschuss Bergbau .Part 1: Choise of fixed means of access between tow levels (ISO 14122-1:2001).Requirements and testing.Part 4: Fixed ladders (ISO 14122-4:2004).07 Personal protective equipment .Safety footwear (ISO/DIS 20345:2009). German version EN ISO 14122-4:2004 (14) /FABERG co-author/ 02.Safety footwear (ISO 20345:2004+AMD1:2007).Register of Mining Standards 2010-12 FB Mine Safety 07 07 Mine Safety NA 008-07-01 AA Personal safety and protective equipment DIN EN 795/A1 01. German version prEN ISO 20345:2009 (16) /FABERG co-author/ 12.Not tested.07 Personal protective equipment .07 Personal fall protection equipment .83 Snap hook from light metal. German version EN 14404:2004 (12) /FABERG co-author/ 06.02 Safety of machinery .Permanent means of access to machinery .05 Personal protective equipment .Test methods for footwear (ISO 20344:2004+Amd.07 Personal fall protection equipment . Amendment A1. requirements and testing (5) /FABERG co-author/ 01.Part 2: Working platforms and wlkways (ISO 14122-2:2001).1:2007). Corrigenda to DIN EN ISO 20347:200410. German version EN ISO 14122-3:2001 (9) /FABERG co-author/ 12.91 Safety harness.96 Protection against falls from a height . German Version EN ISO 20345:2004+AC:2007+A1:2007 (15) /FABERG co-author/ 05.04 Safety of machinery .Knee protectors for work in the neeling position. German Version EN ISO 20344:2004+AC:2005*A1:2007 (26) /FABERG co-author/ 12. German version EN ISO 14122-1:2001 (8) /FABERG co-author/ 01. German version EN ISO 20347:2004/AC:2007 (99) /FABERG co-author/ 12. German Version EN ISO 20347:2004.Part 3: Stairs. safety requirements and testing (6) /FABERG co-author/ 01. German version EN 795:1996 (10) /FABERG co-author/ 06.01 Protection against falls from a height .Protective footwear (ISO/DIS 20346:2009).Requirements and testing. German version EN 795:1996/A1:2000 (6) /FABERG co-author/ 08. German version EN ISO 14122-2:2001 (7) /FABERG co-author/ 01.10 Double loop chain for hoisting clothes in pithead baths .Occupational footwear (ISO 20347:2004+AMD1:2007).Permanent means of access to machinery . 89 Symbol mallet and iron (5) 06.03 Clothing for the mining industry .07 Gratings used as floor coverings .06 Gratings used as stairtreads . gas rescue and fire rescue crews .06 Fire resistant fluids .05 Clothing for the mining industry .07 Clothing for the mining industry .Register of Mining Standards 2010-12 DIN 21800 DIN 21802 DIN 23301 DIN 23307 DIN 23311-1 DIN 23311-2 DIN 23320-1 DIN 23320-2 06. gas rescue and fire rescue crews .01 Rescue equipment .Part 3: Plastic gratings (7) /FABERG coauthor/ 04. rubber knee pads (5) 02.70 Chain locks (4) /FABERG co-author/ 04.Part 5: Protective hoods (7) 05.03 Flameproof protective clothing for the mining industry .Part 2: Single piece working suits (combinations) (5) 09.07 Gratings used as stairtreads .85 Knee pads for mining.Shirt for miners (7) 09.Part 4: Underwear (5) 10.89 Symbols for mine rescue and gas protection squads (6) 03. gas rescue and fire rescue crews .05 Clothing for the mining industry .07 Gratings used as stairtreads .03 Shin protectors for mining (7) 09.Hydraulic fluids of categories HFAE and HFAS Characteristics and requirements (7) /FABERG co-author/ 04. gas rescue and fire rescue crews .01 Safety markings for mines (15) 05.Protecting clothing for people of mine rescue.Socks for mining workers (6) 11.04 Flameproof protective clothing for the mining industry .98 Flameproof protective clothing for the mining industry .Part 2: Plastic knee pads (6) FB Mine Safety 07 04.Rescue hooks with safety eyelet holes (6) /FABERG coauthor/ 08.07 Safety footwear for underground mining (9) 06. minimum requirements (5) /FABERG co-author/ Page 22 of 45 DIN 23320-3 DIN 23320-4 DIN 23320-5 DIN 23323 DIN 23327 DIN 23328 DIN 23330 DIN 23341 DIN 23342 DIN 23343 DIN 23344 DIN 23345 DIN 23346 DIN 23400 DIN 23405 DIN 24320 DIN 24531-1 DIN 24531-2 DIN 24531-3 DIN 24534 DIN 24537-1 DIN 24537-2 DIN 24537-3 DIN 34300 DIN 51502 DIN 51634 FABERG Normenausschuss Bergbau .05 Clothing for the mining industry .Part 3: Plastic gratings (6) /FABERG co-author/ 03.Part 3: Two-piece working suits (5) 09.08 Rescue stretcher for mining (dragging basket) .03 Flameproof protective clothing for the mining industry .Men's slip (6) 08.Part 2: Sheet metal gratings (7) /FABERG coauthor/ 08.Two-piece work suits (Jacket and trousers) (7) 08.Part 2: Sheet metal gratings (7) /FABERG coauthor/ 08.Woven farbics for work suits (6) 11. safety lamps mineral spirit.03 Clothing for the mining industry .Part 1: Safety requirements and testing (5) 09.09 Leather backside protectors for miners (back skin) (5) 06. equipment and lubricating points (7) /FABERG co-author/ 12.03 Clothing for the mining industry .03 Flameproof protective clothing for the mining industry .Part 1: Metal gratings (7) /FABERG co-author/ 08.04 First aid boxes and first aid material for use in mining (6) 12.06 Gratings used as floor coverings .Singlet with 1/4 sleeves (7) 03.Part 1: Metal gratings (7) /FABERG co-author/ 08.Protecting clothing for people of mine rescue.Protecting clothing for people of mine rescue.Safety requirements and testing (10) 10.Protecting clothing for people of mine rescue.07 Gratings used as floor coverings .81 Mineral spirits.Long underpants (7) 09.98 Knee pads for mining .90 Designation of lubricants and marking of lubricant containers.07 Bathing sandals for miners (5) 07. 03 Underground lighting in hardcoal mining .Part 8: Building sites (5) 10. German version EN 620132:2006 (12) /FABERG co-author/ DIN EN 62013-2 NA 008-07-03 AA Explosion prevention and protection DIN EN 1127-2 07.Terms (6) 07.Part 4: Conveyor belt (5) 02. German version EN 13463-5:2003 (13) /FABERG co-author/ DIN EN 1710 DIN EN 13463-1 DIN EN 13463-5 FABERG Normenausschuss Bergbau Page 23 of 45 . position lamps.Register of Mining Standards 2010-12 NA 008-07-02 AA Lighting DIN 20609 DIN 20610 DIN 22433 DIN 22434-1 DIN 22434-2 DIN 22434-3 DIN 22434-4 DIN 22434-5 DIN 22434-6 DIN 22434-7 DIN 22434-8 DIN 22434-9 DIN 22434-10 DIN 49659 DIN 49741 DIN 49834 FB Mine Safety 07 11.Lighting-technological planning bases .96 Underground lighting in hardcoal mining . design features. photometric requirements (5) 10.03 Underground lighting in hardcoal mining .94 Lighting of mine locomotives. meters and measurements (6) 04.Lighting-technological planning bases .Lighting-technological planning bases . German versionrEN 13463-1:2009 (26) /FABERG co-author/ 03.Part 6: Area of roadway-driving operation (5) 07. German version EN 1710:2005+A1:2008 (17) 07.95 Underground lighting in hardcoal mining .08 Equipment and components intended for use in potentially explosive atmospheres in underground mines.Lighting-technological planning bases . German version EN 11272:2002+A1:2008 (17) 08.07 Caplights for use in mines susceptible to firedamp . design features.Lighting-technological planning bases .Lighting-technological planning bases .Part 5: Protection by constructional safety "c".86 Fluorescent lamps.07 Caplights for use in mines susceptible to firedamp .Part 1: Basic method and requirements.Lighting-technological planning bases .Lighting-technological planning bases .68 Lamp cap BX22d/32 (4) /FABERG co-author/ 08.03 Underground lighting in hardcoal mining .93 Lighting of mine locomotives.04 Underground lighting in hardcoal mining .10 Explosive atmospheres .98 Underground lighting in hardcoal mining .Lighting-technological planning bases .Part 2: Performance and other safety-related matters (IEC 62013-2:2005).69 Electric lamps for portable miner's luminaires (4) /FABERG co-author/ NA 008-07-02-01 AK Caplights DIN EN 62013-1 02. photometric requirements.03 Underground lighting in hardcoal mining .Part 9: Areas of rail track operation (5) 02. German version EN 62013-1:2006 (16) /FABERG co-author/ 02. non preheated for potentially explosive atmospheres (5) /FABERG co-author/ 11.04 Non-electrical equipment for potentially explosive atmospheres .Explosion prevention and protection .Construction and testing in relation to the risk of explosion (IEC 62013-1:2005).Part 1: General specification (6) 02.Part 2: Coalfaces with shield support (5) 02.Part 5: Material handling places (5) 02. head lamps.Part 1: General requirements .01 Underground lighting in hardcoal mining .03 Underground lighting in hardcoal mining .Part 7: Pit-bottom (5) 01.05 Underground lighting in hardcoal mining .Part 2: Basic concepts and methodology in mining.Part 10: Workshops and special premises (6) 12.09 Non-electrical equipment for use in potentially explosive atmospheres .Part 3: T-junctions (5) 11.Lighting-technological planning bases . Cable entries . category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust.Part 1: 2-bar explosion proof ventilation structures. German version EN 13631-1:2005 (7) FABERG Normenausschuss Bergbau Page 24 of 45 .81 Terminal board.High explosives . safety requirements and testing (5) 11.Dimensions (6) 04.85 Terminal board. safety requirements and testing (7) 03.04 Buttress threads .01 Group 1.06 Explosion prevention and protection in underground mines .Register of Mining Standards 2010-12 DIN EN 14591-1/B1 FB Mine Safety 07 06. accessories (6) /FABERG coauthor/ 10.8 mm to 2 mm pitch . main dimensions (5) /FABERG co-author/ 10.Part 2: Gland adaptors for entries. German version EN 14983:2007 (13) 09. cable sockets (5) /FABERG co-author/ DIN 20401 DIN 22412 DIN 22416 DIN 22417 DIN 22418 DIN 22419-1 DIN 22419-2 DIN 22419-3 DIN 22424 DIN 22425 DIN 46295-1 DIN 46295-2 DIN 46295-3 NA 008-07-04-01 AK Explosives DIN EN 13631-1 07.04 Electrical apparatus for potentially explosive atmospheres for mining .Cable entries .Cable entries .Part 1: Requirements.90 Electrical apparatus for potentially explosive atmospheres for mining.Protective systems .04 Explosion prevention and protection in underground mines .86 Electrical apparatus for potentially explosive atmospheres in mining. triangular head bolts.96 Explosibility of coal dust in underground hard coal mining . German version EN 50303:2000 (7) /FABERG co-author/ DIN EN 14591-1 DIN EN 14591-2 DIN EN 14591-4 DIN EN 14983 DIN 21577 DIN EN 50303 NA 008-07-03-01 AK Apparatus for potentially explosive atmospheres for mining DIN EN 1834-2 03.Part 3: Gland flanges for entries.90 Electrical apparatus for potentially explosive atmospheres for mining.Protective systems .04 Electrical apparatus for potentially explosive atmospheres for mining .07 Explosion prevention and protection in underground mines .Tests and assessments of coal dust-air-mixtures and hybrid mixtures (8) 05. screw plugs. safety requirements and testing (6) 12.00 Reciprocating internal combustion engines .Protective systems .0. German version EN 14591-1:2004/AC. German version prEN 14591-4:2005 (9) 06.Equipment and protective systems for firedamp drainage.04 Electrical apparatus for potentially explosive atmospheres for mining .07 Explosion prevention and protection in underground mining . German version EN 14591-1:2004 (10) 07. square shaped with six slit-bolts. square shaped with six slit-bolts. Corrigenda to DIN EN 14591-1:2004-12. German version EN 1834-2:2000 (10) /FABERG co-author/ 12.Safety requirements for design and construction of engines for use in potentially explosive atmospheres . safety requirements and testing (6) 12.86 Slit-bolts (5) /FABERG co-author/ 09.07 Explosions prevention and protection in underground mines .Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust.89 Electrical apparatus for potentially explosive atmospheres for mining.Part 1: Requirements for basic design (8) 12. square shaped with six slit-bolts. triangle head bolts (6) 03.Part 4: Automatic extinguishing systems for road headers. forms of keys for triangular socket wrenches (5) 04. triangular nuts (6) 04.05 Explosives for civil uses .2006 (99) 12.Part 2: Passive water trough barriers.88 Electrical apparatus for potentially explosive atmospheres.Protective systems .Part 1: 2-bar explosion proof ventilation structures. German Version EN 145912:2007 (17) 09.81 Terminal board. 04 Explosives for civil uses . German version EN 13631-13:2003 (7) 07.02 Explosives for civil uses .04 Explosives for civil uses . German version EN 13631-4:2002 (8) 12.Detonating cords and safety fuses .03 Explosives for civil uses .High explosives . German version prEN 13631-15:2003 (12) 11. German version EN 13630-4:2002 (8) 03.Part 3: Determination of sensitiveness to friction of the core of detonating cords.05 Explosives for civil uses . German version EN 13631-12:2004 (6) 07.Register of Mining Standards 2010-12 DIN EN 13631-2 DIN EN 13631-3 DIN EN 13631-4 DIN EN 13631-5 DIN EN 13631-6 DIN EN 13631-7 DIN EN 13631-10 DIN EN 13631-11 DIN EN 13631-12 DIN EN 13631-13 DIN EN 13631-14 DIN EN 13631-15 DIN EN 13631-16 DIN 20163 DIN 20164-1 FB Mine Safety 07 12.High explosives . German version EN 13630-1:2003 (7) 12.High explosives .High explosives .Part 8: Determination of resistance to water of detonating cords and safety fuses. marking (12) NA 008-07-04-02 AK Detonating cords DIN EN 13630-1 DIN EN 13630-2 03. German version EN 13631-14:2003 (8) 07.Part 10: Method for the verification of the means of initiation.Part 4: Determionation of sentiveness to impact of explosives.Part 13: Determionation of density. German version EN 13631-3:2004 (8) 12.02 Explosives for civil uses .Part 11: Determionation of transmission of detonation. units and symbols (14) 01. German version EN 13631-7:2003 (7) 02.03 Explosives for civil uses . German version EN 13631-10:2003 (8) 02.Part 7: Determionation of safety and reliability at extreme temperatures.04 Explosives for civil uses .02 Explosives for civil uses .02 Explosives for civil uses . German version EN 13631-2:2002 (7) 11.Part 4: Determination of sensitiveness to impact of detonating cords.High explosives .04 Explosives for civil uses .02 Explosives for civil uses . German version EN 13630-2:2002 (7) 12. German version EN 13630-7:2002 (6) 12.Detonating cords and safety fuses .High explosives .Part 3: Determionation of sensitiveness to friction of explosives.High explosives . German version EN 13631-16:2004 (7) 11.Detonating cords and safety fuses . German version EN 13631-5:2002 (7) 12.Part 2: Determionation of thermal stability of explosives.High explosives .Part 16: Detection and measurement of toxic gases.04 Explosives for civil uses .Part 14: Determionation of velocity of detonation.02 Explosives for civil uses .Part 2: Determination of thermal stability of detonating cords and safety fuses.05 Explosives for civil uses .High explosives .07 Blasting supplies .Detonating cords and safety fuses .Terminology.02 Explosives for civil uses . German version EN 13630-5:2003 (9) 12.Detonating cords and safety fuses .Part 1: Requirements.Part 12: Specification of boosters with different initiating capability.02 Explosives for civil uses . German version EN 13631-11:2003 (8) 02.02 Explosives for civil uses .Detonating cords and safety fuses . testing.02 Explosives for civil uses . German version EN 13630-6:2002 (6) 12.94 Blasting .Part 7: Determination of reability of initiation of detonating cords.High explosives .High explosives .Part 1: Requirements.Part 15: Calculation of thermodynamic properties.High explosives .04 Explosives for civil uses .04 Explosives for civil uses .Part 6: Determionation of resistance to hydrostatic pressure. German version EN 13630-8:2002 (7) DIN EN 13630-3 DIN EN 13630-4 DIN EN 13630-5 DIN EN 13630-6 DIN EN 13630-7 DIN EN 13630-8 FABERG Normenausschuss Bergbau Page 25 of 45 .High explosives . German version EN 13630-3:2002 (6) 12.Part 5: Determionation of resistance to water.Part 5: Determination of resistance to abrasion of detopnating cords.Detonating cords and safety fuses . German version EN 13631-6:2002 (7) 02.Part 6: Determination of resistance to tension of detonating cords.Explosives .Detonating cords and safety fuses . Part 9: Determination of transmission of detonation from detonating cord to detonating cord. testing.Part 7: Safety requirements.Hygienic requirements.10 Blasting supplies .Part 1: Conveyor belts . brattice materials and lagging mats .Safety requirements.Part 4: Flat air ducts . tube isolations and hoses . testing. German version EN 1363012:2002 (6) 08. marking (8) 10.Part 12: Determination of burning duration of safety fuses. marking (7) 06. testing.10 Articles and materials from synthetic for use in underground mines .Part 5: Tubes. coated/uncoated tissue.Detonating cords and safety fuses . German version EN 13630-11:2002 (6) 12.Intrinsically safe detonators (permitted detonators) Requirements and testing (8) DIN EN 13630-10 DIN EN 13630-11 DIN EN 13630-12 DIN 20165 NA 008-07-05 AA Plastics DIN 22100-1 DIN 22100-3 DIN 22100-4 DIN 22100-5 DIN 22100-6 07.09 Articles and materials from synthetics for use in underground mines .Part 7: Safety requirements.Detonating cords and safety fuses .10 Articles and materials from synthetic for use in underground mines . testing. German version EN 13630-9:2004 (7) 08.05 Explosives for civil uses .02 Explosives for civil uses .02 Explosives for civil uses . marking (6) 10.Part 6: Sheeting.Part 3: Spiral air ducts .10 Articles and materials from synthetic for use in underground mines . marking (17) 08. testing.91 Conveyor belts with textile plies for use in coal mining.10 Synthetic materials for use in underground mines .Safety requirements.Part 10: Determination of initiating capacity of detonating cords.Safety requirements. testing.Part 11: Determination of velocity of detonation of detonating cords.Detonating cords and safety fuses .04 Explosives for civil uses . testing.Detonating cords and safety fuses . marking (8) 10.Safety requirements. marking (8) 10.00 Articles and materials from synthetics for use in underground mines . marking (24) 08.10 Articles and materials from synthetic for use in underground mines .Register of Mining Standards 2010-12 DIN EN 13630-9 FB Mine Safety 07 07. fire testing (6) DIN 22100-7 E DIN 22100-7 DIN 22118 FABERG Normenausschuss Bergbau Page 26 of 45 . German version EN 1360-10:2005 (8) 12. 85 Investigations of the raw material in hard-coal-mining .mining .05 Investigations of the raw material in hard-coal-mining .Part 1: Survey (8) 09.Assessment of preparation equipment and processes .Assessment of preparation equipment and processes .98 Investigations of raw material in hard-coal-mining .Part 3: Cleaning (13) 01.98 Investigations of raw material in hard-coal-mining .85 Investigations of the raw material in hard-coal-mining. survey of processes and their applications (7) 08.Part 1: Terms.Part 2: Terms relating to processes (15) 12.Microscopical examinations of hard coal.Determination of tensile strength on solid rock (5) 01.Microscopical examination of hard coal. coke and briquettes .Microscopical examination of hard coal. Koksen und Briketts Sonderuntersuchungen (4) 07.98 Investigations of raw material in hard-coal-mining .05 Preparation of hard coal .Microscopical examination of hard coal.Microscopical examinations of rocks (17) 02.88 Preparation of hard coal .05 Preparation of hard coal .Part 3: Maceral analysis on particulated blocks (5) 12. coke and briquettes .Microscopical examination of hard coal.Part 4: Separation of solids from water (12) DIN 22020-1 DIN 22020-2 DIN 22020-3 DIN 22020-4 DIN 22020-5 BB 22020-7 DIN 22021 DIN 22024 DIN 23004-1 DIN 23004-2 DIN 23005 DIN 23006-1 DIN 23006-2 DIN 23006-3 DIN 23006-4 FABERG Normenausschuss Bergbau Page 27 of 45 .08 Investigations of the raw material in hard-coal-mining .Sampling and schema of tests (10) 03.Description and estimation of raw coal properties in view of preparation (10) 01. determination of the particle-size-distribution <größer>20 µm by sieve-analysis (12) 03.97 Investigations of the raw material in hard-coal-mining .85 Investigations of the raw material in hard-coal.Part 2: Sizing (14) 01.Part 1: Survey (6) 05. balance of quantities (15) 01.05 Preparation of hard coal .85 Investigations of the raw material in hard-coal-mining determation of the particledensity-distribution by float-and-sink-analysis (10) 03.89 Investigations of the raw material in hard-coal-mining .87 Preparation of hard coal .Froth-flotation-analysis (12) 01.Part 2: Terms relating to raw material (13) 08.05 Preparation of hard coal . coke and briquettes .Channel sample Sampling and schema of tests (9) 08.88 Preparation of hard coal .Raw coal sample from the production of a working area .Assessment of preparation equipment and processes .Part 1: Particle-size-distribution < 60 µm by ultrasonicmicrosieve-analysis (7) 08. coke and briquettes .85 Investigations of the raw material in hard-coal mining .Part 1: General rules.98 Investigations of raw material in hard-coal-mining .Part 2: Preparation of polished surface from lump material and particulate blocks (5) 08. coke and briquettes .74 Mikroskopische Untersuchungen an Steinkohlen.Assessment of preparation equipment and processes .Part 4: Microlithotype analysis on particulate blocks (6) 02.Part 5: Reflectance measurements on vitrinites (12) 09.85 Investigations of the raw material in hard-coal-mining .Determination of the particle-size-distribution .Register of Mining Standards 2010-12 FB Analysis of Raw Material/Coal preparation 08 08 Analysis of Raw Material/Coal preparation NA 008-08-01 AA Investigations of raw material/Preparation of hard coal DIN 22005-1 DIN 22005-2 DIN 22013 DIN 22014 DIN 22017 DIN 22018 DIN 22019-1 DIN 22019-2 09.97 Investigations of raw material in hard-coal-mining . testing (9) 08.Part 1: Homogenizing (7) 12.Flotation agents .Preparation plants . preparation-plants .06 Preparation of hard coal .Terms. preparation plants Part 4: Technical agreements with regard to the fixation of guaranties (7) 11.Part 7: Equipment monitoring.Part 2: Separations (8) 02.Preparation plants .Part 6: Homogenizing (11) 01.Part 5: Process control (9) 12.06 Preparation of hard coal.Part 7: Equipment monitoring (7) 12.Part 2: Flowsheets (10) 10.09 Preparation of hard coal .Assessment of preparation equipment and processes .Medium solids .Part 5: Size reduction and dissociation (9) 01. requirements. Supplement 1: Means of application for the standard (7) 02.08 Preparation of hard coal .Part 6: Equipment and operation of a plant laboratory (9) 11.06 Preparation of hard coal . verification (12) 05.05 Preparation of hard coal .Assessment of preparation equipment and processes .88 Preparation of hard coal .92 Preparation of hard coal.Flocculants for process water .Assessment of preparation equipment and processes .05 Preparation of hard coal .Simulation of processes and material-flows .05 Preparation of hard coal . verification (8) 03.04 Preparation of hard coal .Preparation plants .Terms.Preparation plants .88 Preparation of hard coal .Terms.85 Preparation of hard coal .Preparation plants . preparation plants .Register of Mining Standards 2010-12 DIN 23006-5 DIN 23006-6 DIN 23006-7 DIN 23007 DIN 23008 DIN 23009 DIN 23010-1 DIN 23010-2 DIN 23011-2 DIN 23011-3 DIN 23011-4 DIN 23011-5 DIN 23011-6 DIN 23011-7 DIN 23011-7 Bbl 1 DIN 23011-8 FB Analysis of Raw Material/Coal preparation 08 01.Part 8: Process technical requirements on preparation equipment (13) FABERG Normenausschuss Bergbau Page 28 of 45 .90 Preparation of hard coal . requirements.89 Preparation of hard coal. requirements.Part 3: Graphical symbols for flowsheets (14) 11.05 Preparation of hard coal .Part 7: Involuntary breakage (8) 10.Simulation of processes and material-flows . requirements and testing (7) FABERG Normenausschuss Bergbau Page 29 of 45 .Part 1: Silica bricks .Part 2: Fireclay bricks .95 Refractories for use in coke ovens .Requirements and testing (7) 10.90 Refractories for use in coke ovens.Register of Mining Standards 2010-12 FB Cokery.Requirements and testing (6) 02. mortar for silica and fireclay bricks. Briquettes NA 008-09-01 AA Bricks for coke ovens DIN 1089-1 DIN 1089-2 DIN 1089-3 02.95 Refractories for use in coke ovens . Briquettes 09 09 Cokery. 07 Excavators.07 Excavators.Register of Mining Standards 2010-12 FB Open Cast Mining 10 10 Open Cast Mining NA 008-10-01 AA Excavators. joint types. test instruction (14) 12.Part 2: Calculation principles (32) 11.06 Excavators. spreaders and auxiliary equipment in opencast lignite mines . bow slipper holder for contact wire clamps (4) /FABERG co-author/ 12. connecting dimensions (4) /FABERG co-author/ NA 008-10-02 AA Belt conveyors in opencast lignite mining DIN EN 14658 06.06 Excavators. commissioning and monitoring (10) 12. spreaders and auxiliary equipment in opencast lignite mines .10 Excavators.52 Electric railway vehicles. spreaders and auxiliary equipment in opencast lignite mines .07 Excavators.68 Thimble with clevis for overhead equipment (4) /FABERG co-author/ 01. spreaders and auxiliary equipment in opencast lignite mines . technical specifications (4) /FABERG co-author/ 12. German version EN 14658:2005+A1:2010 (15) FABERG Normenausschuss Bergbau Page 30 of 45 .67 Drums for contact-wires for electric traction (4) /FABERG co-author/ 01. spreaders and auxiliary equipment in opencast lignite mines .79 Brake block holders and brake block keys for composite brake blocks on rail vehicles.04 Excavators.Part 4: Hoisting winch brakes (6) 12. spreaders and auxiliary equipment in opencast lignite mines .68 Eye and clevis for overhead equipment. commissioning and monitoring (10) 01.Part 1: Construction.General safety requirements for continuous handling equipment for opencast lignite mining.10 Continuous handling equipment and systems .Part 1: Construction. classification.Part 3: Welded connections. spreaders and auxiliary equipment in opencast lignite mines .Part 5: Slewing brakes and overload protecting devices (7) 12. spreaders and auxiliary equipment in opencast lignite mines DIN 5651 DIN 22261-1 E DIN 22261-1 DIN 22261-2 DIN 22261-3 DIN 22261-4 DIN 22261-5 DIN 22261-6 DIN 43120 DIN 43139 DIN 43153 DIN 43160 11.Part 6: Examination of ropes and rope end fittings (7) 09. 02 Mine plans.Part 1: Terms.Part 2: Interface for EDP based transfer of symbols of mining .84 Mine plans.96 Mine plans .Part 3: Regional and local subdivisions.Structure of mining specific plans .Graphic design of sheets (12) 01.08 Mine plans.Petrography .99 Mine plans .Stratigraphy .Open cast mining . drawing principles (5) 08. general principles (5) 09.04 Mine plans .93 Mine plants. survey (19) 01.Opencast mining .Petrography .Part 2: Thicknesses (10) 01.Part 4: Minerals (6) FABERG Normenausschuss Bergbau Page 31 of 45 .Sizes and foldings (8) 01.96 Mine plans . structure and list of standards.Subdivision of sheets (9) 11. open pit mines DIN 21909 DIN 21910 DIN 21911 DIN 21912-1 DIN 21912-2 E DIN 21912-2 02.02 Mine plans .Part 2: Regional and local subdivisions.Part 7: Gyroscopes 06.00 Mine plans . lettering (5) 11.96 Mine plans .Part 2: Magmatites (10) 04.06 Mine plans .06 Mine plans . objects on the surface and contour lines (12) 01.Survey points and lines (9) 06.09 Mine plans . survey (14) 04. classification (6) 08.90 Field procedure for precision testing of surveying instruments . Hard coal (8) 11. slip-on caps for suspension theodolites Connecting dimensions (5) NA 008-11-01-01 AK Basics DIN 21901 DIN 21901 Bbl 1 DIN 21901 Bbl 2 DIN 21901 Bbl 3 DIN 21901-2 DIN 21902 DIN 21902-2 DIN 21903 DIN 21904 DIN 21905 DIN 21906 DIN 21906 Bbl 1 DIN 21906 Bbl 2 DIN 21907 DIN 21908 02.91 Mine plans.Petrography .94 Mine plans .Colours (8) NA 008-11-01-02 AK Objects on the surface.Register of Mining Standards 2010-12 FB Mine Plans 11 11 Mine Plans NA 008-11-01 AA Mine surveying DIN 18723-7 DIN 21961 07.00 Mine surveying .95 Mine plans .Structure and list of standards .Structure and list of standards .02 Mine plans .06 Mine plans .Mineral deposits .Part 2: Reconstruction (11) NA 008-11-01-03 AK Geologic symbols and terms DIN 21918-1 DIN 21918-2 DIN 21919-1 DIN 21919-2 DIN 21919-3 DIN 21920-1 DIN 21920-2 DIN 21920-3 DIN 21920-4 10.Part 3: Metamorphic and other lithogenetic phenomena (10) 04.Mineral deposits .88 Mine plans .Specific mapping (12) 10. index 11.Part 1: Generally applicable symbols .Part 2: Reconstruction (8) 11.Structure and list of standards -Supplement 1: Contents (6) 09.01 Mine plans . subdivision of sheets.94 Mine plans.Supplement 2: List of abbreviations (18) 07. Lignite (9) 11.90 Mine plans .08 Mine plants .Slip-on pivots.Part 1: General classification (7) 12.Part 1: General requirements (12) 03.94 Mine plants.Structure of mining specific plans (7) 08.01 Mine plans .08 Mine plans .Open cast mining .Stratigraphy .03 Mine plans .94 Mine plans .Petrography . subdivision of sheets. structure and list of standards.Part 2: Completion of mine plans (11) 10.99 Mine plants .Titles and boundaries (12) 03.Stratigraphy .Sediments (9) 04. 99 Mine plans .Treatment of exploratory drillings (17) 01.96 Mine plans .09 Mine plans.Part 2: Geomechanical measuring points (7) NA 008-11-01-05 AK Mine workings DIN 21913-1 DIN 21913-1 Bbl 1 DIN 21913-2 DIN 21913-3 DIN 21913-4 DIN 21913-6 E DIN 21913-7 02.Deep mining .Drilling and cavern . storage.Part 2: Brine caverns (10) FABERG Normenausschuss Bergbau Page 32 of 45 .Part 5: Hard coal mining (12) FB Mine Plans 11 04.Deep mining .99 Mine plans . deep mining.92 Mine plans.Part 1: Ventilation system and meteorology (13 02.Drilling and cavern . operational safety.Deep mining . underground working.Petrography .Part 7: Potash and rock salt mining (7) 04.Part 7: Shaft plan (11) NA 008-11-01-06 AK Drilling.Operational safety .Part 2: Fire prevention on the surface (12) 06.Part 11: Geometrical dimensions in underground workings (7) 02.Part 3: Closure of underground workings (8) 02.07 Mine plans .09 Mine plans .93 Mine plans. fire prevention under the surface (10) 11.02 Mine plans .Deep mining .Deep mining .Tectonic elements and figure of strata (13) 11.96 Mine plans .Strata and ground movements (13) 03.Macroscopic classification and description of overburden rock (9) NA 008-11-01-04 AK Special representations DIN 21913-11 DIN 21916-1 DIN 21916-2 DIN 21916-3 E DIN 21916-3 DIN 21917 DIN 21917-2 01.09 Mine plans . deep mining.08 Mine plans . final deposition DIN 21914-1 DIN 21914-2 10.10 Mine plans . caverns.05 Mine plans .04 Mine plans . stowage and deposit (14) 02.Part 6: Safekeeping of mining produced hollows (7) 11. zones of protective measures (11) 07.94 Mine plans . storage and final deposition in mine workings (33) 02.Register of Mining Standards 2010-12 DIN 21920-5 DIN 21920-7 DIN 21921 DIN 22011 DIN 22012 DIN 22015 11.Petrography .92 Mine plans. Part 4: hazardous zones.93 Investigations of the raw material in hard-coal-mining .94 Investigations of the raw material in hard-coal-mining . underground workings (19) 02.Operational safety .10 Mine plans .Strata and ground movements .93 Investigations of the raw material in hardcoal-mining .Part 3: Fire prevention under the surface (11) 02.Part 1: Drilling (15) 02.Operational safety .Macropetrographic classification and topographic survey of hard-coal and host rock (8) 10.00 Mine plans .Part 2: Extraction. 98 Gas supply systems . German version EN 1918-3:1998 (10) /FABERG co-author/ 07. German version EN 1918-1:1998 (9) /FABERG co-author/ 07.06 Gas analysis .Determination of composition with defined uncertainty by gas chromatography . application .Types.Underground gas storage .98 Gas supply systems . German version EN 19184:1998 (7) /FABERG co-author/ 07. preparation of calibration gas mixtures.Physical properties.85 Gas analysis .Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001).Doctor test (ISO 5275:2003) (6) /FABERG co-author/ 11. German version EN ISO 6974-1:2001 (12) /FABERG co-author/ 03.06 Gas analysis . mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989).10 Natural gas .Remarks on the production (5) /FABERG co-author/ 05.Part 4: Functional recommendations for storage in rock caverns.Part 3: Functional recommendations for storage in solution-mined salt cavities. German version EN ISO 6143:2006 (15) /FABERG co-author/ 05.Determination of sulfur compounds .04 Natural gas .85 Gas analysis.Underground gas storage .Part 2: Functional recommendations for storage in oil and gas fields. English version EN ISO 6570:2004 (13) /FABERG co-author/ 06.Detection of thiols and other sulfur species .Unterground gas storage . German version EN ISO 6326-3:1997 (7) /FABERG coauthor/ 04. preparation of calibration gas mixtures.Part 1: General guidelines and calculation of composition (ISO/DIS 6974-1:2010).Part 5: Lingener combustion method (ISO 6326-5:1989).83 Gas analysis.98 Natural gas .Register of Mining Standards 2010-12 FB Fuels 12 12 Fuels NA 008-12-01 AA Gaseous fuels DIN 1340 DIN 1340 Bbl 1 DIN 1871 DIN EN 1918-1 12.Part 1: Functional recommendations for storage in aquifers.Part 3: Determination of hydrogen sulfide.Requirements for certificates for calibration gases and gas mixtures (ISO 6141:2000). German version EN ISO 6326-5:1997 (9) /FABERG co-author/ 12.Underground gas storage . constituents. German version prEN ISO 6974-1:2010 (20) /FABERG co-author/ Page 33 of 45 DIN EN 1918-2 DIN EN 1918-3 DIN EN 1918-4 DIN EN 1918-5 DIN ISO 5275 DIN EN ISO 6141 DIN ISO 6142 DIN EN ISO 6143 DIN ISO 6144 DIN ISO 6146 DIN EN ISO 6326-3 DIN EN ISO 6326-5 DIN EN ISO 6570 DIN EN ISO 6974-1 E DIN EN ISO 6974-1 FABERG Normenausschuss Bergbau . German version EN 19182:1998 (8) /FABERG co-author/ 07.98 Gas supply systems .Types.Part 5: Functional recommendations for surface facilities.02 Natural gas .Weighing methods (7) /FABERG co-author/ 11. application (7) /FABERG co-author/ 12.90 Gaseous fuels and other gases .90 Gaseous fuels and other gases . static volumetric methods (10) /FABERG co-author/ 04. German version EN 1871:2000 (13) /FABERG co-author/ 07.Determination of sulfur compounds .99 Road marking materials . German version EN ISO 6141:2006 (8) /FABERG coauthor/ 05.98 Gas supply systems . constituents.Underground gas storage .98 Gas supply systems .Gravimetric methods (ISO 6570:2001).Preparation of calibration gas mixtures .Determination of potential hydrocarbon liquid content .Determination of composition and associated uncertainty by gas chromatography . manometric method (12) /FABERG co-author/ 04.Part 1: Guidelines for tailored analysis (ISO 6974-1:2000). German version EN 1918-5:1998 (6) /FABERG co-author/ 10.05 Petroleum products and hydrocarbon solvents .98 Natural gas . 03 Natural gas .system characteristics and statistics for processing of data (ISO 6974-2:2001).Part 2: Tritation procedure (ISO 10101-2:1993).Determination of mercury . Corrigendum 3:1999). German version EN ISO 10101-2:1998 (8) /FABERG co-author/ 07. Corrigendum 2:1997.02 Natural gas .05 Natural gas .to C5. German version EN ISO 6974-5:2001 (11) /FABERG co-author/ 08. German version EN ISO 6976:2005 (22) /FABERG co-author/ 09.02 Natural gas . German version EN ISO 6978-2:2005 (12) /FABERG co-author/ 07.98 Natural gas .03 Natural gas . Corrigendum to DIN EN ISO 6975:2005-09 (99) /FABERG co-author/ 09. density.Determination of water by the Karl Fischer method .08 Natural gas . German version EN ISO 6975:2005.05 Natural gas .05 Natural gas . German version EN ISO 6974-6:2005 (12) /FABERG co-author/ 09. German version EN ISO 6975:2005 (14) /FABERG co-author/ 09.Determination of mercury .Part 5: Determination of nitrogen.Part 4: Determination of nitrogen.Calculation of calorific values.Part 2: Sampling of mercury by amalgamation on gold/platinum alloy (ISO 6978-2:2003). German version EN ISO 6974-4:2001 / Note: Applies only in conjunction with DIN EN ISO 6974-1 and DIN EN ISO 6974-2 (10) /FABERG co-author/ 06.Determination of water content at high pressure (ISO 11541:1997). German version EN ISO 10723:2002 (19) /FABERG co-author/ 02. German version EN ISO 69781:2005 (12) /FABERG co-author/ 09. nitrogen.Determination of composition with defined uncertainty by gas chromatography .Part 6: Determination of hydrogen. German version EN ISO 6974-2:2002 / Note: Applies only in conjunction with DIN ISO 6974-1 (2002.Determination of composition with defined uncertainty by gas chromatography . carbon dioxide and hydrocarbons up to C8 using two packed columns (ISO 6974-3:2000).Determination of water by the Karl Fischer method . nitrogen. oxygen. German version prEN ISO 11541:2002 (7) /FABERG co-author/ E DIN EN ISO 6974-2 DIN EN ISO 6974-3 DIN EN ISO 6974-4 DIN EN ISO 6974-5 DIN EN ISO 6974-6 DIN EN ISO 6975 DIN EN ISO 6975/B1 DIN EN ISO 6976 DIN EN ISO 6978-1 DIN EN ISO 6978-2 DIN EN ISO 10101-1 DIN EN ISO 10101-2 DIN EN ISO 10101-3 DIN EN ISO 10723 DIN EN ISO 11541 FABERG Normenausschuss Bergbau Page 34 of 45 .Part 3: Coulometric procedure (ISO 10101-3:1993).to C5. carbon dioxide and C1. German version EN ISO 101013:1998 (8) /FABERG co-author/ 02.Determination of water by the Karl Fischer method .98 Natural gas . helium.and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-5:2000).06) (13) /FABERG co-author/ 03.Performance evaluation for on-line analytical systems (ISO 10723:1995).Gas-chromatographic method (ISO 6975:1997).Register of Mining Standards 2010-12 DIN EN ISO 6974-2 FB Fuels 12 07.Part 2: Measuring. German version prEN ISO 6974-2:2010 (20) /FABERG co-author/ 06.Determination of composition and associated uncertainty by gas chromatography .Part 3: Determination of hydrogen.Extended analysis .Gas-chromatographic method (ISO 6975:1997).05 Natural gas .Part 2:Uncertainty calculations (ISO/DIS 6974-1:2010). German version EN ISO 10101-1:1998 (6) /FABERG co-author/ 07. German version EN ISO 6974-3:2001 / Note: Applies only in conjunction with DIN EN ISO 6974-1 and DIN EN ISO 6974-2 (11) /FABERG co-author/ 06.02 Natural gas .Determination of composition with defined uncertainty by gas chromatography . carbon dioxide and C1. helium.10 Natural gas . oxygen.Extended analysis .and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns (ISO 6974-4:2000). relative density and Wobbe index form composiotion (ISO 6976:1995 + Corrigendum 1:1997.05 Natural gas . carbon dioxide and C1 to C8 hydrocarbons using three capillary columns (ISO 6974-6:2002).Part 1: Introduction (ISO 10101-1:1993).98 Natural gas .Determination of composition with defined uncertainty by gas chromatography .02 Natural gas .Determination of composition with defined uncertainty by gas chromatography .Part 1: Sampling of mercury by chemisorption on iodine (ISO 6978-1:2003). Anwendungsbereich. Amendment A1 (4) /FABERG co-author/ 06. calculation of reduced gas volume (4) /FABERG co-author/ 11. relative density and Wobbe index of pure gases and gas mixtures (9) /FABERG coauthor/ 06. German version EN ISO 122132:2009 (16) /FABERG co-author/ 01.gas sampling tubes with straight bore stopcocks (4) /FABERG co-author/ 04. German version EN ISO 12213-1:2009 (11) /FABERG co-author/ 01.Correlation between water content and water dew point (ISO 18453:2004).Gase unter Tage .Determination of sulphur compounds content . visual titration.Part 8: Gaschromatographic determination of dihydrogen sulfide. zinc acetate method (5) /FABERG co-author/ 09.93 Testing of gaseous fuels and other gases.Register of Mining Standards 2010-12 DIN EN ISO 12213-1 FB Fuels 12 01.06 Natural gas . potentiometric method (6) /FABERG co-author/ 12. gravimetric determination of the content of condensate as a function of pressure and temperature (5) /FABERG co-author/ Page 35 of 45 DIN EN ISO 12213-2 DIN EN ISO 12213-3 DIN 12473-1 DIN 12473-2 DIN EN ISO 14111 DIN EN ISO 18453 BB 22061-1 BB 22061-2 BB 22061-3 DIN 51400-4 DIN 51851 DIN 51853 E DIN 51853/A1 DIN 51854 DIN 51855-1 E DIN 51855-1/A1 DIN 51855-4 DIN 51855-6 DIN 51855-7 DIN 51855-8 DIN 51857 DIN 51859 FABERG Normenausschuss Bergbau .Part 6: Content of hydrogen sulfide.Calculation of compression factor . German version EN ISO 14111:1999 (13) /FABERG co-author/ 01.00 Testing of gaseous fuels and other technical gases . terms (5) /FABERG co-author/ 12. German version prEN 18453:2005 (13) /FABERG co-author/ 04. turbidmetric-titration (6) /FABERG co-author/ 04.80 Testing of gaseous fuels and other gases.Determination of sulfur content (total sulfur) Part 4: Combustion according to the Lingener method.10 Natural gas .76 Laboratory glassware . carbonyl sulfide and other sulfur compounds using specific detectors (7) /FABERG co-author/ 03.90 Testing of gaseous fuels and other gases.Sampling.Calculation of compression factor . gaschromatographic determination of the content of odoriferous sulfur compounds using an electrochemical detector (5) /FABERG co-author/ 06.Part 2: Calculation using molarcomposition analysis (ISO 12213-2:2006). German version EN ISO 12213-3:2009 (17) /FABERG co-author/ 04. Begriffe und Allgemeines (1) 04.Guidelines to traceability in analyses (ISO 14111:1997). determination of the content of sulfur compounds.Part 4: Content of hydrogen sulfide. determination of ammonia content (5) /FABERG co-author/ 05.Sampling (8) /FABERG co-author/ 01.97 Gaseous fuels and other gases .Gase unter Tage .Determination of sulfur compounds content .Probenahme (4) 04.10 Natural gas .82 Steinkohlenbergbau .00 Testing of mineral oils and fuels .Determination of the content of sulphur compounds . mercaptan sulfur and carbonylsulfide sulfur.Part 1: Introduction and guidelines (ISO 12213-1:2006).Gase unter Tage .95 Testing of gaseous fuels and other gases .Determination of sulfur compounds content .Determination of the content of sulphur compounds .86 Testing of gaseous fuels and other gases.Part 1: Field of application.82 Steinkohlenbergbau .gas sampling tubes with V-bore stopcocks (4) /FABERG co-author/ 06.Part 3: Calculation using physical properties (ISO 12213-3:2006).82 Steinkohlenbergbau .Part 1: Field of application.Calculation of calorific value.09 Testing of fuel gases .97 Testing of gaseous fuels and other gases .Analyse nach physikalischen Verfahren im Laboratorium (2) 04.95 Testing of fuel gases .00 Naturalgas . Amendment A 1 (4) /FABERG co-author/ 09. density.09 Testing of gaseous fuels and other gases . Zweck. terms.Calculation of compression factor .99 Testing of gaseous fuels and other gases .10 Natural gas .76 Laboratory glassware . 00 Testing of gaseous fuels and other gases . gaschromatographic procedure (6) /FABERG co-author/ 08.Determination of trace elements .06 Testing of solid fuels .Part 6: Evaluation and declaration of results (7) 07.Sampling and sample preparation .Part 3: Sample preparation (9) 09.Determination of mercury content Part 2: Combustion using the modified Lingener method.Quantities of composition.90 Testing of gaseous fuels and other gases. method of means of cooled mirror (5) /FABERG co-author/ 06.83 Testing of gaseous fuels and other gases.01 Solid fuels .Determination of contents of trace elements .86 Testing of gaseous fuels and other gases.Register of Mining Standards 2010-12 DIN 51862 DIN 51863-1 DIN 51863-2 DIN 51864 DIN 51865-1 FB Fuels 12 09. Preparation of samples for the analyses (dissolution method) (7) 02. determination of hydrogen cyanide content.91 Gas analysis.01 Solid fuels .Part 4: Equipment (10) Page 36 of 45 DIN 22022-2 DIN 22022-3 DIN 22022-4 DIN 22022-5 DIN 22022-6 DIN 51700 DIN 51701-1 DIN 51701-2 DIN 51701-3 DIN 51701-4 FABERG Normenausschuss Bergbau . determination of relative density according to the balance method and calculation of density (6) /FABERG coauthor/ 12.98 Testing of gaseous fuels and other gases .83 Testing of gaseous fuels and other gases.Determination of trace elements .01 Solid fuels .Part 2: Application (10) /FABERG co-author/ DIN 51865-2 DIN 51865-3 DIN 51869 DIN 51870 DIN 51871 DIN 51872-4 DIN 51872-5 DIN 51896-1 DIN 51896-2 NA 008-12-02 AA Testing of solid fuels DIN 22022-1 02.10 Testing of solid fuels . Atomic absorption spectrometry (AAS) (6) /FABERG co-author/ 02. determination of nitrogen monoxide content. atomic absorption spectrometry (AAS) (6) /FABERG co-author/ 10.Determination of contents of trace elements . compressibility factor.96 Testing of gaseous fuels and other gases . determination of the main components.Part 1: General rules. bromide cyanogen method (5) /FABERG co-author/ 09.98 Testing of gaseous fuels and other gases . determination of the components.Sampling and sample preparation .Part 4: Atomic absorption spectrometry applying the flameless hydride system or the coldvapour-method (5) 02.82 Testing of gaseous fuels and other gases. nickel carbonate method (6) /FABERG co-author/ 09.Part 5: Atomic absorption spectrometry applying the electrothermal atomization (5) 12.01 Solid fuels .Generalities and index of methods of test (13) 12.81 Testing of gaseaus fuels and other gases. atomic absorption spectrometry (AAS) (6) /FABERG co-author/ 09.85 Testing of gaseous fuels and other technical gases. general statements (5) /FABERG co-author/ 04.07 Testing of solid fuels .Part 2: Sampling (12) 09.Determination of contents of trace elements .01 Solid fuels .Determination of the components Part 5: Capillary gaschromatographic procedure (8) /FABERG co-author/ 10.94 Gas analysis .Determination of trace elements . compressibility factor . sampling and sample preparation.Sampling and sample preparation .Part 2: ICP-OES (5) 02.Part 3: AAS-flame method (5) 02. basis (7) /FABERG co-author/ 09. quantities of compositions.06 Testing of solid fuels .01 Solid fuels .00 Testing of gaseous fuels and other gases.06 Testing of solid fuels . Saltzman method (5) /FABERG co-author/ 09.Part 1: Definitions (6) 09.Determination of mercury content Part 3: Absorption in solutions. determination of hydrogen cyanide content.Sampling and sample preparation . determination of dew point of water vapour. determination of naphthalene content (crude naphthalene) (5) /FABERG co-author/ 09.Determination of mercury content Part 1: Chemisorption on Iodine. Determination of the dilatation of coal (8) 10.02 Testing of solid fuels .Ultimate analysis and calculation of oxygen content (6) 12.Determination of carbon content and hydrogen content Radmacher-Hoverath method (6) 07.08 Testing of solid mineral fuels .Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value . semi-micro Kjeldahl method (5) 06.08 Testing of solid fuels .04 Testing of solid fuels .97 Testing of solid fuels . apparatus.08 Testing of solid mineral fuels .Part 5: Testing of precision (12) 06.01 Testing of solid fuels . methods (12) 05.Part 2: Species (7) 03.90 Testing of solid fuels.94 Testing of solid fuels.03 Testing of solid and liquid fuels .01 Solid fuels .Compressed untreated wood .Sampling and sample preparation .Determination of the water content and the moisture of analysis sample (6) 07.Part 10: X-Ray fluorescence analysis (8) 11.Determination of plastic properties of coal using the Gieseler plastometer (9) 05.Part 1: Total sulfur (7) 06.Method using isoperibol or static jacket calorimeter (8) Page 37 of 45 DIN 51730 DIN 51731 DIN 51732 DIN 51733 DIN 51734 DIN 51735 DIN 51739 DIN 51741 DIN 51742 DIN 51900-1/B1 DIN 51900-1 DIN 51900-2 FABERG Normenausschuss Bergbau .07 Testing of solid fuels .Determination of total carbon.07 Testing of solid mineral fuels .Determination of fluorine content (7) 06.Determination of ash content (5) 03.01 Testing of solid fuels .96 Testing of solid fuels .98 Testing of solid fuels .Part 8: Determination of soda and potash (Na<(Index)2>O.Determination of fusibility of fuel ash (10) 10.99 Testing of solid fuels .Determination of sulfur content .Determination of volatile matter content (7) 08.01 Testing of solid fuels .Determination of chlorine content (6) 05.Register of Mining Standards 2010-12 DIN 51701-5 DIN 51705 DIN 51717 DIN 51718 DIN 51719 DIN 51720 DIN 51721 DIN 51722-1 DIN 51723 DIN 51724-1 DIN 51724-2 DIN 51724-3 DIN 51725 DIN 51726 DIN 51727 DIN 51729-8 DIN 51729-10 E DIN 51729-10 DIN 51729-11 FB Fuels 12 03.Solid mineral fuels .96 Testing of solid fuels .Proximate analysis and calculation of fixed carbon (6) 02.09 Testing of solid mineral fuels . hydrogen and nitrogen .00 Testing of solid and liquid fuels .Determination of chemical composition of fuel ash .Requirements and testing (5) /FABERG co-author/ 08.08 Testing of solid fuels .04 Testing of solid fuels . determination of mechanical strength of coke (6) 06.Determination of the bulk density of solid fuels (5) 07.Determination of chemical composition of fuel ash .98 Testing of solid fuels .01 Testing of solid fuels .Determination of the gross calorific value by the bomb calorimeter and calculation of the net calorific value .98 Testing of solid fuels .Determination of the crucible swelling number of coal (6) 07.Determination of Hardgrove grindability index of hard coal (7) 02.Part 11: Determination by inductively coupled plasma emission spectrometry (ICPOES) (5) 09.Determination of chemical composition of fuel ash .04 Corrigenda to DIN 51900-1:2000-04 04.Part 3: Instrumental methods (6) 06.Determination of the phosphorus content (7) 06.02 Testing of solid fuels .Instumental methods (8) 12.Determination of sulfur content .01 Testing of solid fuels .Determination of sulfur content .99 Testing of solid fuels .Determination of the carbonate carbon dioxide content (7) 06. K<(Index)2>O) contents (5) 05.Part 10: X-Ray fluorescence analysis (5) 03.Part 1: Principles. determination of nitrogen content.Determination of chemical composition of fuel ash .10 Testing of solid fuels . 05 Testing of solid and liquid fuels .Determination of the gross calorific value by the bomb calorimeter and calculation of net calorific value .Register of Mining Standards 2010-12 DIN 51900-3 FB Fuels 12 01.Part 3: Method Using Adiabatic Jacket (8) FABERG Normenausschuss Bergbau Page 38 of 45 . 76 Größen und Einheiten .Teil 4: Zugfeste. Telecontrol and Other Electrical Equipment 14 14 Cables.Ablauf der Datenübertragung (1) 07.Teil 5: Zugfeste.Schnittstellen (3) 07. Kraft. Telecontrol and Other Electrical Equipment 14 Cables.Register of Mining Standards 2010-12 FB Cables. Druck (2) 03.Teil 2: Masse.88 Grubenkabel für Fernmelde.86 Low-voltage high-rupturing capacity fuses with blade contacts.Teil 3: Bewehrte Leitung L-2YYQY (blau) (4) 06.99 Leitungen mit Litzenleitern für erhöhte mechanische Beanspruchung für eigensichere elektrische Anlagen .und Informationsverarbeitungsanlagen .Teil 1: Einheiten . geschirmte Leitung L2Y(C)Y(ZG)Y (blau) (4) 06.99 Leitungen mit Litzenleitern für erhöhte mechanische Beanspruchung für eigensichere elektrische Anlagen .76 Geräte und Anlagen der Fernwirktechnik .Standardaufbau einer Telegrammschnittstelle zwischen Fernwirkstation und Prozeßrechner (3) 07.Auswahl für den Steinkohlenbergbau unter Tage (2) 06. LV HRC fuse links for AV 1000 V (5) /FABERG co-author/ BB 22446 BB 22450-1 BB 22450-2 BB 22450-2/A1 BB 22450-3 BB 22450-4 BB 22450-5 BB 22450-6 BB 22450-7 BB 22450-8 DIN 43620-5 FABERG Normenausschuss Bergbau Page 39 of 45 .und Störfestigkeits-Grenzwerte (4) 08.Änderung 1 (2) 06.73 Wassergekühlte polumschaltbare Drehstrommotoren. geschirmte Leitungen L2YYC(ZG)Y (blau) (4) 06. telecontrol and other electrical equipment BB 22000-1 BB 22000-2 BB 22000-3 BB 22442-1 BB 22442-2 BB 22443 BB 22444-1 BB 22444-2 BB 22444-3 BB 22444-4 BB 22444-4 Bbl 1 BB 22444-4 Bbl 2 BB 22444-4 Bbl 3 BB 22445 11.99 Leitungen mit Litzenleitern für erhöhte mechanische Beanspruchung für eigensichere elektrische Anlagen .Teil 3: Temperatur.87 Geräte und Anlagen der Fernwirktechnik .Teil 8: Zugfeste Leitung L-YY(ZG)Y (blau) (4) 06.Begriffe (2) 10.und Informationsanlagen .Teil 2: Störaussendungs.88 Geräte und Anlagen der Fernwirktechnik .Anforderung und Prüfung (3) 07.03 Elektromagnetische Verträglichkeit für Anlagen im Steinkohlenbergbau .87 Geräte und Anlagen der Fernwirktechnik .Allgemeine Grundlagen (3) 02.99 Grubenkabel für erhöhte mechanische Beanspruchung für eigensichere elektrische Anlagen .87 Geräte und Anlagen der Fernwirktechnik .87 Geräte und Anlagen der Fernwirktechnik .87 Geräte und Anlagen der Fernwirktechnik .Ablaufbeispiel der Datenübertragung (1) 10.Teil 7: Bewehrtes Grubenkabel G-2YY(Z)Y (blau) mit Paaren (4) 06.Auswahl für den Steinkohlenbergbau unter Tage (2) 12.03 Elektromagnetische Verträglichkeit für Anlagen im Steinkohlenbergbau .Dokumentation von Softwaresystemen (4) 02.99 Leitungen mit Litzenleitern für erhöhte mechanische Beanspruchung für eigensichere elektrische Anlagen .und Informationsanlagen . Gewicht (1) 02.Frequenzbereiche für Funkanlagen (2) 06.Auswahl für den Steinkohlenbergbau unter Tage .76 Größen und Einheiten .82 Geräte und Anlagen der Fernwirktechnik .75 Größen und Einheiten .Teil 6: Bewehrtes Grubenkabel G-2YYYBY (blau) mit Paaren (4) 06. Bauform B5 Anbaumaße und Zuordnung der Leistungen bei Ausführung in Zündschutzart (Sch) d (1) 05.88 Leitungen für Fernmelde.87 Geräte und Anlagen der Fernwirktechnik .00 Leitungen für Fernmelde.Standard für die serielle Datenübertragung im Nahbereich (2) 07.Teil 1: Grundlagen (4) 03.99 Grubenkabel für erhöhte mechanische Beanspruchung für eigensichere elektrische Anlagen . 00 Coal cleaning equipment .04 Hard coal .Determination of bulk density in a small container 11.Froth flotation testing .89 Coal preparation plant . carbominerite and minerite composition 10.Determination of caking power .Principles and conventions for flowsheets 12.89 Coal preparation plant .Part 3: Method of determining maceral group composition 12.Part 3: Release evaluation 06.Vocabulary .Part 1: Vocabulary 10.04 Hard coal .Determination of mechanical strength 07.00 Coal .Part 2: Sequential evaluation 08.Methods for evalution flocculants for use in coal preparation .09 Methods for the petrographic analysis of coals .08 Coal .Register of Mining Standards 2010-12 FB Solid mineral fuels ISO/TC 27 ISO/TC 27 Solid mineral fuels ISO/TC 27 Solid mineral fuels ISO 502 ISO 1953 02.Part 5: Method of determining microscopically the reflectance of vitrinite ISO/TC 27/SC 1 Coal preparation .Determination of shatter indices Page 40 of 45 12.92 Solid mineral fuels .Terminology and performance ISO 561 ISO 923 ISO 924 ISO 1213-1 ISO 1213-2 ISO 7936 ISO 8833 ISO 8858-1 ISO 8858-2 ISO 8858-3 ISO 10086-1 ISO 10086-2 ISO 10752 ISO 10753 ISO 15117-1 ISO 20905 ISO 23499 ISO/TC 27/SC 3 Coke ISO 556 ISO 567 ISO 616 11.04 Coal flow properties .09 Methods for the petrographic analysis of coals .Part 2: Methods of preparing coal samples 10.Graphical symbols 05.Part 1: Basic parameters 01.Part 1: Laboratory procedure 08.92 Hard coal .04 Coal preparation .Gray-King coke test 07.05 Classification of coals ISO/TC 27/WG 19 Petrographic analysis of bituminous coal and anthracite ISO 7404-1 ISO 7404-2 ISO 7404-3 ISO 7404-4 ISO 7404-5 10.82 Coal .89 Magnetite for use in coal preparation .04 Coal .Part 1: Bin flow 07.Froth flotation testing .Part 1: Terms relating to coal preparation 04.Froth flotation testing .80 Coke (greater than 20 mm in size) .Size analysis by sieving ISO/TC 27/WG 18 Classification of coals ISO 11760 02.09 Methods for the petrographic analysis of coals .Determination of dust/moisture relationship for coal 06.Determination of bulk density FABERG Normenausschuss Bergbau .88 Methods for the petrographic analysis of bitumious coal and anthracite .90 Hard coal .Performance evaluation 02.Assessment of the liability to breakdown in water of materials associated with coal seams 05.Part 2: Flocculants as filter aids in rotary vacuum filtration systems 05.94 Coal sizing equipment .Part 4: Method of determining microlithotype.Part 2: Terms relating to sampling.Vocabulary .95 Coke .93 Solid mineral fuels .Methods for evaluating flocculants for use in coal preparation .94 Methods for the petrographic analysis of bitumious coal and anthracite .Test methods 09.95 Coke .Determination and presentation of float and sink characteristics General directions for apparatus and procedures 11.94 Hard coal .94 Coal preparation plant .Performance evaluation 12. testing and analysis 04. 86 Coke .95 Coke .Determination of abrasiveness 10.83 Brown coals and lignites .Mechanical sampling .83 Brown coals and lignites .Part 3: Coal .95 Coke (nominal top size greater than 20 mm) .06 Coke .Sampling from moving streams 12.Register of Mining Standards 2010-12 ISO 728 ISO 1013 ISO 1014 ISO 2325 ISO 18894 FB Solid mineral fuels ISO/TC 27 11.Part 2: Coal .Size analysis by sieving 07.Principles of sampling .Determination of bulk density in a large container 09.01 Hard coal and coke .Preparation of test samples ISO/TC 27/SC 4/WG 5 Methods for test for bias ISO 13909-7 ISO 13909-8 12.Part 6: Coke .Determination of true relative density.Mechanical sampling .09 ISO 18283 Technical Corrigendum 1 ISO/TC 27/SC 4/WG 8 Sampling of coal slurries ISO 20904 10.01 Hard coal and coke .01 Hard coal and coke . sample preparation and testing 12.Mechanical sampling .01 Hard coal and coke .91 Coal .Part 7: Methods for determining the precision of sampling.Sampling of pulverized coal conveyed by gases in direct fire coal systems 06.01 Hard coal and coke .Guidance on the sampling of coal seams ISO/TC 27/SC 4/WG 7 Manual Sampling ISO 18283 ISO 18283:2006/Cor 1 09. apparent relative density and porosity 02.Part 1: Sampling for determination of moisture content and for general analysis 12.Sampling from stationary lots 12.01 Hard coal and coke .Mechanical sampling .06 Hard coal .Sampling of slurries ISO/TC 27/SC 5 Methods of analysis ISO 12900 ISO 23380 12.Principles of sampling .97 Hard coal .06 Hard coal and coke .98 Solid mineral fuels .Part 2: Sample preparation for determination of moisture content and for general analysis 12.08 Selection of methods for the determination of trace elements in coal FABERG Normenausschuss Bergbau Page 41 of 45 .Preparation of test samples ISO/TC 27/SC 4/WG 2 Sampling of coke ISO 13909-5 ISO 13909-6 12.Part 8: Methods of testing for bias ISO/TC 27/SC 4/WG 6 Sampling of coal seams ISO 14180 08.Part 1: General introduction 12.Mechanical sampling .Size analysis (Nominal top size 20 mm or less) 04.01 Hard coal and coke .07 Hard coal and coke .Part 5: Coke .Determination of coke reactivity index (CRI) and coke strength after reaction (CSR) ISO/TC 27/SC 4 Sampling ISO 5069-1 ISO 5069-2 ISO 9931 ISO 21398 11.Mechanical sampling .Manual sampling 04.Sampling from moving streams 12.85 Coke .Guidance to the inspection of mechanical sampling systems ISO/TC 27/SC 4/WG 1 Sampling of coal ISO 13909-1 ISO 13909-2 ISO 13909-3 ISO 13909-4 12.Part 4: Coal .01 Hard coal and coke .Mechanical sampling .Mechanical sampling . High temperature combustion method .10 Hard coal and coke . gas and coke residue by low temperature distillation 10. Technical Corrigendum 1 10. Technical corrigendum 1 02. oxygen and sulfur ISO 157 ISO 334 ISO 351/COR 1 ISO 351 ISO 587 ISO 609 ISO 609/COR 1 ISO 625 ISO 625/COR 1 ISO 925 ISO 1994 ISO 17247 ISO 17247/Cor 1 ISO 19579 ISO 29541 06.05 Coal .99 Solid mineral fuels .10 Coal .Liebig method 07.Eschka method 07.Determination of moisture content .96 Solid mineral fuels .High temperature combustion method.06 Coal .Part 2: Indirect gravimetric method for moisture in the analysis sample Page 42 of 45 FABERG Normenausschuss Bergbau .Register of Mining Standards 2010-12 ISO/TC 27/SC 5/WG 1 Moisture.96 Solid mineral fuels . Technical Corrigendum 1 05.Determination of moisture content .Determination of carbon and hydrogen .Determination of total moisture 11.Determination of yield of benzene-soluble extract Semi-automatic method 12.Determination of carbon dioxide content .Classification by types on the basis of total moisture content and tar yield 01.06 Solid mineral fuels .Determination of moisture in the general analysis test sample 11.Determination of oxygen content 05.Determination of total sulfur .00 Brown coals and lignites .06 Brown coals and lignites .Determination of the yields of tar.92 Solid mineral fuels .Coke .Proximate analysis ISO/TC 27/SC 5/WG 2 Carbon.Gravimetric method 12.99 Coke . volatile matter and ash ISO 562 ISO 579 ISO 589 ISO 687 ISO 1018 ISO 1170 ISO 1171 ISO 11722 ISO 17246 FB Solid mineral fuels ISO/TC 27 06.Determination of ash 05. hydrogen and nitrogen content .Determination of forms of sulfur 12.Part 1: Indirect gravimetric method for total moisture 01.08 Hard coal .Determination of chlorine using Eschka mixture 02.07 Brown coals and lignites .10 Solid minerals fuels .Liebig method.Determination of moisture in the general analysis test sample by drying in nitrogen 06.Determination of total moisture 06.High temperature combustion method 07.Hard coal .96 Solid mineral fuels .96 Solid mineral fuels .High temperature combustion method 05.Determination of total carbon.Determination of total sulfur .10 Solid mineral fuels .75 Hard coal .07 Brown coals and lignites .Technical corrigendum 1 02. water.10 Solid mineral fuels .96 Coal .Determination of carbon and hydrogen .Calculation of analyses to different bases 06.Ultimate Analysis.Determination of total sulfur .Instrumental method ISO/TC 27/SC 5/WG 7 Brown coal and lignites ISO 647 ISO 975 ISO 1017 ISO 2950 ISO 5068-1 ISO 5068-2 11.Determination of carbon and hydrogen .08 Coal and coke .96 Solid mineral fuels .74 Brown coals and lignites .76 Hard coal .74 Brown coals and lignites .97 Solid mineral fuels .Determination of moisture-holding capacity 10. hydrogen.Determination of volatile matter 12.Determination of acetone-soluble material ("resinous substance") in benzene-soluble extract 02.Ultimate Analysis 07.Determination of carbon and hydrogen .96 Solid mineral fuels .Determination of sulfur by IR spectrometry 10.97 Solid mineral fuels . nitrogen. Determination of the volatile matter in the analysis sample .Determination of mineral matter 08.81 Solid mineral fuels .Determination of total fluorine in coal.10 Hard coal .Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value 12.09 Coal .Register of Mining Standards 2010-12 ISO 5071-1 ISO 5072 ISO 5073 FB Solid mineral fuels ISO/TC 27 08.08 Solid mineral fuels .Determination of the swelling properties using a dilatometer 02.Determination of arsenic and selenium .94 Hard coal .Audibert-Arnu dilatometer test 11.Determination of Hardgrove grindability index FABERG Normenausschuss Bergbau Page 43 of 45 .Guidelines for the validation of alternative methods of analysis ISO/TC 27/SC 5/WG 10 Plastic properties of coal ISO 349 ISO 501 ISO 8264 ISO 10329 ISO 15585 ISO 23873 01.Determination of extractable metals in dilute hydrochloric acid 11.Determination of total cadmium content of coal ISO/TC 27/SC 5/WG 9 Guidelines for the validation of methods ISO 11726 08. minor and trace elements in coal and coal residues ISO 601 ISO 602 ISO 622 ISO 1952 ISO 11723 ISO 11724 ISO 15237 ISO 15238 12.Determination of humic acids ISO/TC 27/SC 5/WG 8 Major.Determination of true relative density and apparent relative density 12.97 Brown coals and lignites .Eschka's mixture and hydride generation method 11.04 Solid mineral fuels .Constant-torque Gieseler plastometer method 01.Method for the measurement of the swelling of hard coal using a dilatometer ISO/TC 27/SC 5/WG 11 On-line analyzers ISO 15239 04.75 Hard coal .06 Solid mineral fuels .83 Coal .Determination of total mercury content of coal 12.Hard Coal .Part 1: Two.99 Brown coals and lignites .81 Solid mineral fuels .Reduced molybdophosphate photometric method 08. coke and fly ash 12.Determination of caking index 11.Determination of the crucible swelling number 11.03 Solid minerals fuels .89 Hard coal .Determination of phosphorus content .04 Solid minerals fuels .Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590 02.Evaluation of the measurement performance of on-line analyzers ISO/TC 27/SC 5/WG 12 Miscellaneous Methods ISO 540 ISO 1928 ISO 5074 05.furnace method 07.03 Solid mineral fuels .09 Solid mineral fuels .97 Brown coals and lignites .05 Solid mineral fuels .03 Coal .Determination of plastic properties .08 Hard coal and coke .04 Solid mineral fuels .Determination of ash fusibility 05. Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels 06.Characteristics and tests 07.74 Graphical symbols for use on detailed maps. nominal sizes 22 mm to 38 mm 02. plans and geological crosssections .Drill rods with tapered connection for percussive drilling 08.74 Rock drilling .84 Graphical symbols for use on detailed maps.74 Graphical symbols for use on detailed maps. plans and geological crosssections .91 Rock drilling equipment .Technical delivery requirements 04.74 Rock drilling .Hollwow drill steels in bar form.90 High-tensile steel chains (round link) for chain conveyors and coal ploughs 08.88 Stranded wire ropes for mine hoisting .Part 4: Representation of metamorphic rocks 07.Part 1: General rules of representation 09.Fibre components .84 Mining .76 Stranded wire ropes for mine hoisting .Integral stems 02.Scraper bars for chain conveyors 06.91 Rock drilling equipment .Part 7: Tectonic symbols ISO 710-7 ISO/TC 82/SC 2 Components of coalface machinery using high-tensile round link chains ISO 610 ISO 1082 ISO 5612 ISO 5613 08.91 Rock drilling equipment .89 Graphical symbols for use on detailed maps.90 Mining . lubricants and service dressings .Connecting dimensions 01.Part 6: Representation of contact rocks and rocks which have undergone metasomatic.Shackle type connector units for chain conveyors 08.Left-hand rope threads ISO/TC 82/SC 1 Geological and petrographic symbols ISO 710-1 ISO 710-2 ISO 710-3 ISO 710-4 ISO 710-5 ISO 710-6 09.84 Graphical symbols for use on detailed maps.91 Rock drilling equipment . plans and geological crosssections . plans and geological crosssections .Drive sprocket assemblies for chain conveyors ISO/TC 82/SC 3 Mining ropes ISO 3154 ISO 3155 ISO 3156 ISO 5614 06.Characteristics and tests 06.90 Mining .88 Locked coil wire ropes for mine hoisting .82 Graphical symbols for use on detailed maps.91 Rock drilling equipment .Rope threaded drill steel equipment for percussive drilling.Extension drill-steel equipment for percussive lang-hole drilling Reverse-buttress-threaded equipment 1 1/2 to 2 1/2 in (38 to 64 mm) 02. hexagonal and round 02.Part 3: Representation of magmatic rocks 04.Impregnating compounds. pneumatolytic or hydrothermal transformation or transformation by weathering 08.Part 2: Representation of sedimentary rocks 09.Extension drill-steel equipment for percussive long-hole drilling Reverse-buttress-threaded equipment 1 1/16 and 1 1/14 (27 and 32 mm) 09.76 Stranded wire ropes for mine hoisting . plans and geological crosssections .Technical delivery requirements FABERG Normenausschuss Bergbau Page 44 of 45 . plans and geological crosssections . plans and geological crosssections .Part 5: Representation of minerals 06.74 Graphical symbols for use on detailed maps.74 Rock drilling .91 Rock drilling equipment .Rotary drill-rods and rotary drill-bits for dry drilling .Register of Mining Standards 2010-12 FB Mining ISO/TC 82 ISO/TC 82 Mining ISO/TC 82 Mining ISO 721 ISO 722 ISO 723 ISO 1717 ISO 1718 ISO 1721 ISO 1722 ISO 10207 ISO 10208 01. 99 Wireline diamond core drilling equipment .System CSSK FABERG Normenausschuss Bergbau Page 45 of 45 .Part 1: Metric units 10.92 Wireline diamond core drilling equipment .Part 1: Metric units 07.System A .92 Rotary core diamond drilling equipment .Part 3: Metric units 07.System B .Register of Mining Standards 2010-12 ISO/TC 82/SC 6 Diamond core drilling equipment ISO 3551-1 ISO 3551-2 ISO 3552-1 ISO 3552-2 ISO 8866 ISO 10097-1 ISO 10097-2 ISO 10098 FB Mining ISO/TC 82 07.Part 2: Inch units 07.Part 2: Inch units 10.Part 4: Inch units 05.System A .System A .91 Rotary core diamond drilling equipment .92 Rotary core diamond drilling equipment .System B .92 Rotary core diamond drilling equipment .92 Rotary core diamond drilling equipment .System A .99 Wireline diamond core drilling equipment .System C 10.


Comments

Copyright © 2024 UPDOCS Inc.